Precision marking gauges for accurate layout work
Precision marking gauges, also known as marking rules or scribers, are essential tools for transferring exact measurements and scoring parallel lines on metal and wood, enabling clean preparation for sawing, drilling and assembly. They are used across metal fabrication, mechanical engineering and joinery to create repeatable reference lines for precision layout, repeatability and edge marking, and they support fine model making where delicate detail transfer is required. Choose robust materials and fine-adjustment features—such as micrometer-style settings or vernier scales—to ensure long-term stability and clear, consistent scribed lines.
300mm Scribing Gauge Round Rod Replaceable Scriber 0.10mm Resolution - TECWERK
Take advantage of precise, repeatable layout and a robust, workshop-ready design to reduce rework and speed up marking tasks. Order the gauge directly via Metav Werkzeuge or consult their specialists for application advice. TECWERK marking gauge, 300 mm range, 0.10 mm reading The TECWERK marking gauge for long, accurate scribing in workshop layout and component marking. 300 mm marking range with mm graduation Carbide scribing needle, replaceable Round stem with round contact plate Reading accuracy 0.10 mm Reliable accuracy for consistent layouts The 300 mm marking range and clear mm graduation enable extended scribing without repeated repositioning, which shortens setup time on larger components. A 0.10 mm reading gives a measurable step for fine adjustments and helps ensure repeatable layout lines; this level of resolution supports routine workshop tolerances and reduces the risk of rework. The design is aimed at professionals who require dependable marking for serial tasks and one-off production alike, where predictable outcomes are essential for productivity. Durable construction built for everyday workshop use A round stem combined with a round contact plate provides stable seating against a surface and smooth lateral guidance, reducing chatter during scribing. The supplied carbide scribing needle (hard metal) is both wear-resistant and replaceable, offering long service life under frequent use. Replaceability means maintenance is straightforward: worn points are exchanged rather than the entire tool, improving lifecycle economy and keeping downtime to a minimum. The overall construction balances robustness with the fine control needed for precise marking tasks. Clear operation that speeds up layout work The simple scale layout and mechanical adjustment of this gauge bring practical efficiency: once the desired distance is set, the gauge locks to retain that setting for multiple marks. This avoids repeated measuring and supports a smooth workflow when transferring dimensions from drawings or templates to workpieces. The instrument’s straightforward mechanics minimise the learning curve for new operators while still delivering the precision expected by experienced technicians and quality personnel. Practical scope and delivered equipment Delivered complete with a replaceable carbide scribing needle, the gauge is ready for immediate use in the workshop. The compact, familiar form factor fits into standard tool kits and is suited to routine scribing and layout operations in production, maintenance and toolroom environments. The single-unit packaging keeps handling simple and ensures that spare needles and future replacements can be stocked according to usage rates. For tailored procurement and application advice regarding the TECWERK marking gauge, contact Metav Werkzeuge in Emmerich for local support and reliable supply coordination. Technical data SKU: 2000858940NW Label: Streichmaß 300mm rd.Abl.0,10mm TECWERK Manufacturer: TECWERK Product type: Marking gauge Measuring range: 300 mm Reading/resolution: 0.10 mm Packaging unit: 1 Facts Measuring range: 300 mm Reading: 0.10 mm Packaging unit: 1 SKU/UID: 2000858940NW Special features Round stem and round contact plate Replaceable carbide (hard metal) scribing needle Supplied with carbide scribing needle mm graduation FAQ What measuring range does the TECWERK marking gauge offer? The TECWERK marking gauge provides a measuring range of 300 mm suitable for extended layout work. How fine is the scale reading on this marking gauge? The instrument features a reading of 0.10 mm, giving clear, repeatable steps for precise scribing. Is the scribing needle replaceable and what is supplied? Yes, the scribing needle is replaceable; the marking gauge is supplied with a carbide (hard metal) needle. Which components are responsible for stable scribing performance? The round stem together with the round contact plate ensures stable seating and smooth lateral guidance during scribing. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
400mm Scriber With Roller Nonius 0.1–0.0078mm - TECWERK
The combination of a 400 mm measuring range, an integrated roller guide and a fine Nonius scale yields reliable, repeatable layout results for workshop use; order the TECWERK marking gauge directly via Metav Werkzeuge or consult our specialists for technical advice. TECWERK marking gauge 400 mm with roller — robust workshop layout tool A compact marking gauge designed for precise linear marking and scribing across a 400 mm span, ideal for repeatable layout tasks in metalworking and woodworking environments. 400 mm measuring range Roller guide for consistent marking Nonius scale 1/10–1/128 mm Suitable for standard workshop workflows Consistent linear marking for repeatable layout The 400 mm span offers a practical working length for most bench tasks while the integrated roller guide ensures the scribing element runs evenly along edges and templates. This construction reduces lateral slip during marking, so lines remain straight and consistent even during repetitive operations. The result is fewer reworks and quicker setup times, which supports faster throughput in small-series production or detailed repair work. Emphasis is placed on measurable repeatability rather than subjective impressions. Precise fine-reading with a Nonius scale An embedded Nonius provides graduations from 1/10 to 1/128 mm, enabling fine interpolation beyond the main scale. The secondary scale allows clear reading of fractional millimetres for layout tolerances that demand closer control. In practice, the finer resolution translates into smaller positional errors when transferring designs from drawing to workpiece — a rational improvement in accuracy that benefits both prototype work and finishing operations. Simple instruction on reading the Nonius helps operators apply the capability without specialist training. Durable guidance for daily workshop use The roller-guided marking mechanism is conceived to reduce friction against guide edges and minimise marking wear over extended use. The marking gauge’s straightforward mechanics support quick adjustments and stable holding of the set position during repeated passes. As a component of workshop equipment, this tool focuses on functional longevity and uncomplicated maintenance, contributing to dependable performance across varied tasks without requiring complex calibration procedures. Practical integration into production and service workflows As part of a coherent workshop supply chain, this marking gauge fits well into layout stations and mobile tooling kits. Its clear scale interaction and mechanical simplicity make it suitable for technicians and skilled tradespeople who require dependable, fast marking rather than elaborate electronic measurement. For questions about compatibility with specific processes or for supplementary technical data, Metav Werkzeuge provides direct assistance and product expertise to support decision-making and procurement. Contact Metav Werkzeuge for a tailored supply of the TECWERK marking gauge with roller — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and delivery from Emmerich Technical data Article number: 2000858630NW Label: Streichmaß 400mm m.Laufrolle TECWERK Product type: Streichmaß Manufacturer: TECWERK Specifications Measuring range: 400 mm Nonius: 1/10 - 1/128 mm Packaging unit: 1 UID: 2000858630NW Features Roller guide (Laufrolle) Fine Nonius graduation Workshop-oriented marking gauge FAQ What materials is the marking gauge intended for? The TECWERK marking gauge (marking gauge type) is designed as a general-purpose layout tool; the roller guide and scale suit common workshop materials and edge-guided marking tasks. How does the Nonius scale improve marking accuracy? By providing graduations from 1/10 to 1/128 mm, the Nonius permits finer interpolation on the main scale, so the marking gauge can transfer smaller offsets with measurable precision. Is the roller guide replaceable or adjustable? The product description specifies a roller guide feature; for details on spare parts or specific adjustment procedures, Metav Werkzeuge can provide the relevant technical information for the TECWERK marking gauge. Can the marking gauge be integrated into a standard layout station? Yes, the gauge’s linear span and straightforward mechanics make it suitable for inclusion in bench-mounted or portable layout stations used in small-batch production and repair operations. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
500mm Digital Punch Caliper With 50x40mm Scriber Plate And Adjustable Scriber, 0.01mm Resolution, Stainless Steel - Metav IndustryLine
Take advantage of the combination of 0.01 mm digital resolution, a 500 mm measuring range and a robust stainless steel frame for dependable, repeatable marking and measurement on medium-format components; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Digital marking caliper 500 mm, scribing plate 50 x 40 mm — Metav IndustryLine digital scriber with adjustable scribing needle Digital marking caliper 500 mm, scribing plate 50 x 40 mm designed for precise scribing and dimension checking in machine shops and jig production 500 mm measurement range 0.01 mm digital resolution Adjustable scribing needle Robust 15 x 6 mm measuring bar included Precision and repeatability for medium‑format work The caliper is classified as a medium‑range caliper (300–500 mm), which balances reach and rigidity for tasks such as fixture set‑up, housing inspection and medium‑sized assemblies. The 0.01 mm resolution on the digital readout delivers clear numeric feedback suitable for routine quality control, while the stainless construction minimises flex and ensures stable zeroing across the full travel. This combination reduces rework by improving first‑pass accuracy and speeds up routine marking operations by making measurements immediately readable. Clear marking and durable construction for daily workshop use Built with a stainless steel frame and a metal display housing, the scriber is engineered for workshop conditions where robustness matters. The integrated scribing plate (50 x 40 mm) and the movable scribing needle (5 x 60 mm) allow consistent, repeatable score lines on parts; the adjustable needle means different needle positions can be used without swapping tools. The instrument arrives with a solid 15 x 6 mm measuring bar and is supplied in a protective case for secure transport and storage, supporting safe handling between job sites or workstations. Efficient data handling and straightforward operation The digital readout is equipped with ON/OFF, ZERO, UNIT and HOLD functions to simplify measurement routines and reduce transcription errors. The device runs on a 3 V supply and includes an RB 5 data output for connection to compatible data loggers or CNC interfaces where traceable electronic capture is required. These features streamline inspection workflows and make the tool a practical choice for production environments that value speed and traceability over purely analogue methods. Contact Metav Werkzeuge for a bespoke quotation or technical clarification on the Metav IndustryLine marking caliper and to confirm delivery options from our Emmerich site Technical Data Article number: M240.153.1 GTIN: 4054469178387 Weight: 0.6 kg Material: stainless steel with metal housing Measurement range: 0–500 mm Resolution: 0.01 mm (0.0005 in) Power: 3 V Included accessory: solid measuring bar 15 x 6 mm Scribing plate: 50 x 40 mm Scribing needle: 5 x 60 mm Facts Measurement range: 0–500 mm Display resolution: 0.01 mm Weight: 0.6 kg Scribing needle dimensions: 5 x 60 mm Scribing plate dimensions: 50 x 40 mm Special features Digital display with ON/OFF, ZERO, UNIT, HOLD Adjustable/movable scribing needle RB 5 data output Supplied in transport case (plastic or wooden) Category: marking tools (Anreisszeuge) FAQ What makes this marking caliper suitable for workshop measurement tasks? The marking caliper combines a 500 mm measuring range with a 0.01 mm digital readout and a stiff stainless frame, providing reach and repeatability that suits fixture work, medium components and assembly checks; these attributes make the tool well matched to everyday workshop measurement tasks. Is the scribing needle adjustable and replaceable? Yes, the instrument features an adjustable scribing needle (5 x 60 mm) that can be positioned as required for different marking depths and geometries, and the needle can be serviced or replaced without changing the whole caliper. Can measurement data be exported from the caliper? Data export is available via the RB 5 output, allowing measured values to be recorded electronically when connected to compatible data acquisition systems or inspection software. Does the caliper include any accessories for handling or transport? The caliper is delivered with a solid 15 x 6 mm measuring bar and is supplied in a protective transport case to safeguard the tool during storage and movement between workstations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
ø 5x20 mm Scriber Needle High-Speed Steel - Metav IndustryLine
Compact, wear-resistant marking performance from a hardened tip and a slim shank ensures repeatable results in routine workshop marking; the HSS construction and ø 5 x 20 mm profile combine durability with easy mounting. Order the replacement part directly via Metav Werkzeuge or contact the consultants for application advice. Scribing Needle M240.151.A1 – HSS, ø 5 x 20 mm (Metav IndustryLine) A scribing needle M240.151.A1 designed as a hardened high-speed steel marking tip for reliable metal scribing and simple integration into compatible holders. Durable HSS marking tip Precise ø 5 x 20 mm shank For 240.151-compatible holders Marking accuracy that stays consistent The hardened HSS tip delivers a reliable edge geometry that maintains sharpness under frequent use, reducing the need for early replacement. This means clearer centre lines and reference marks on metal components, which supports reproducible setup and faster downstream processing. The compact ø 5 x 20 mm format keeps the mass low and the centre of gravity close to the holder, improving handling and minimising unintentional deflection during scribing. Robust design for everyday workshop use A solid shank diameter of 5 mm with a 20 mm engagement length provides a stable clamping zone and simple fitment into standard holders. The high-speed steel composition balances toughness and hardness for marking a range of ferrous materials while resisting chipping in normal shop conditions. The compact construction makes replacement straightforward, so production downtime is reduced and toolroom logistics remain efficient. Easy identification and traceability for parts management Small weight and clear identifiers simplify inventory handling: the article is listed under SKU M240.151.A1 and GTIN is available for procurement systems. The modest form factor keeps stores tidy and allows quick swaps on marking fixtures, supporting lean workshop routines. Documentation and image resources are provided for rapid verification before installation, helping to maintain process consistency. For reliable, workshop-grade marking choose Metav IndustryLine’s hardened HSS scribing needle and contact Metav Werkzeuge for personalised advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M240.151.A1 GTIN: 4061905053672 Label: Reißnadel für 240.151 Ø 5 x 20 mm, HSS Facts Diameter: 5 mm Length: 20 mm Weight: 0.01 kg Special features Material: HSS (high-speed steel) Brand: Metav IndustryLine Intended for holder 240.151 Image available FAQ What material is the marking tip made from? The tip is made from HSS (high-speed steel), giving the scribing needle good wear resistance and toughness for routine shop marking. Which holder is compatible with this needle? The needle is intended for use with holders compatible with the 240.151 series; the part is sold under SKU M240.151.A1. How does the ø 5 x 20 mm size affect handling? The ø 5 x 20 mm shank provides a compact, stiff clamping section that improves stability and reduces deflection during marking. Is product identification available for procurement systems? Yes, the item has a GTIN (4061905053672) and the catalog article number M240.151.A1 for straightforward ordering and stock management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ø5x60 Scriber Needle for Digital Marking Gauge, 5 mm x 60 mm - Metav IndustryLine
Take advantage of the Ø 5 x 60 mm tip and model compatibility to ensure reliable, repeatable layout marks in daily workshop routines; the lightweight design minimises handling fatigue and keeps marking precise. Order this replacement scribing needle directly via Metav Werkzeuge or contact their consultants for technical clarification. Scribing needle M240.152.A1 — replacement tip, Ø 5 x 60 mm (Metav IndustryLine) Scribing needle M240.152.A1 is a precision replacement tip designed for use with compatible layout tools, providing a compact marking solution for workshop and metalworking tasks. Ø 5 x 60 mm tip size Compatible with models 240.152 and 240.153 Lightweight: approx. 10 g Consistent, measurable layout marks for shop-floor accuracy The compact Ø 5 x 60 mm geometry delivers a defined contact point that helps create consistent scribe lines on metal and other typical layout surfaces. Because the tip provides a narrow, stable contact radius, routine marking becomes more repeatable, reducing the need for corrective work and improving throughput. This measurable precision benefits quality control processes where clear, reproducible lines support efficient downstream operations and machining set-up. Low weight and straightforward replacement for efficient workflows Weighing approximately 10 g, the replacement tip contributes negligible additional mass to the marking instrument, which reduces operator fatigue during prolonged layout sessions. The design focuses on quick exchangeability with the specified layouts, enabling fast maintenance cycles and minimal downtime. The combination of small mass and straightforward fitment supports higher process reliability in busy workshops and on production benches. Suited to workshop and metalworking applications where control matters This replacement scribing needle is intended for standard layout and scribing tasks in metalworking, toolmaking and general workshop use. The compact form factor makes it suitable for tight access points and for marking detailed features on components prior to machining. Craftspeople and industrial operators benefit from the combination of compatibility and small form factor when preparing precise datum lines or transferring measurements to workpieces. Contact Metav Werkzeuge for a technical match to existing layout tools or to order this Metav IndustryLine replacement scribing needle via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M240.152.A1 GTIN: 4054469178370 Weight: 0.01 kg Dimensions: Ø 5 x 60 mm Customs tariff number: 90173000 Facts Diameter: 5 mm Length: 60 mm Weight: 0.01 kg Special features Compatible with models 240.152 and 240.153 Category: marking tools / scribing accessory SKU: M240.152.A1 FAQ Which models is this replacement tip compatible with? The replacement scribing needle is compatible with layout tools designated as models 240.152 and 240.153 and is supplied under SKU M240.152.A1. What are the exact dimensions and weight of the tip? Dimensions are Ø 5 x 60 mm and the mass is approximately 0.01 kg for the replacement scribing needle. For which tasks is this scribing needle most suitable? The tip is suitable for precise layout marking in metalworking, toolmaking and general workshop applications where narrow, repeatable scribe lines are required. Is this a permanent tool or a replaceable consumable? The component is designed as a replaceable scribing tip for the compatible layout instruments, enabling simple replacement when wear affects marking quality. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Scribe precise, repeatable lines every time
Marking gauges (also known as scribing gauges or marking tools) are essential layout instruments for transferring exact dimensions to workpieces. They create parallel lines to an edge for woodworking and metalworking, enabling accurate cutting, drilling and fitting in both one-off and batch production.
How marking gauges work in workshop practice
A marking gauge consists of a fence or stop that runs against the workpiece edge and a scribing element that marks a line at a fixed distance. The tool is used across disciplines: in metal fabrication to transfer measurements and produce parallel scribe lines on sheets and profiles; in mechanical engineering for repeatable layout such as drilling patterns and fits; in joinery to mark grooves, tenons and dovetails; and in model making for fine detail on wood and plastic. Technical variants include wooden bodies for comfortable handling and metal versions for maximum stability and durability.
Clear advantages that improve productivity
Marking gauges deliver measurable benefits in everyday production by reducing setup time, increasing repeatability and improving edge control. Key features to consider:
- fine adjustment or micrometer-style settings for precise, repeatable offsets
- nonius/scale options for readable incremental measuring and confident transfer
- robust materials and spielfreie (play-free) guidance to maintain accuracy during repeated use
- ergonomic fences and locking screws for secure, vibration-free scribing
- suitability for both coarse woodworking and fine metal or model work
Metav: accessible precision for every workshop
Metav combines decades of specialist knowledge with a broad, quality-controlled assortment, making high-precision tools accessible without compromise. From Emmerich we supply a carefully curated range of marking gauges alongside over 250,000 tools and measuring instruments, backed by the trust of more than 48,000 customers across Europe. For a single-source solution that reduces supplier complexity while ensuring consistent availability, Metav is positioned as the practical choice for industry and trade.
In short
Marking gauges provide the repeatability and edge-parallel accuracy needed for reliable layout in woodworking, metalworking and precision model making — available in robust designs with fine-adjustment options to match the application.
FAQ
Which marking gauge is best for metalwork versus woodworking?
For metalwork, choose a marking gauge with a metal body and a hardened scribing element; for woodworking, a wooden or composite body offers comfortable handling. Both types of marking gauges can be supplied with micrometer or scale adjustments depending on the required precision.
How do I achieve the most accurate scribe line?
Run the fence firmly and flat against the workpiece edge, apply even pressure to the scribing element and keep the surface clean. A trial scribe on a scrap piece confirms settings before series work.
What adjustment options should I prioritise?
Look for a clear scale or nonius combined with a micrometer-style fine adjustment and a secure locking screw to eliminate play and enable repeatable offsets.
What should I check when choosing a marking gauge for repeated production?
Prioritise material and robustness, spielfreie guidance for repeat accuracy, ergonomic handling, and the appropriate adjustment method (scale, nonius or micrometer) to suit the tolerance demands of your workflow.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com