Precision marking and layout compasses to ensure exact transfers
Precision marking compasses and layout compasses are indispensable for transferring radii and distances with pinpoint accuracy in metalworking and toolmaking, offering reliable layout for subsequent machining operations. These compasses, spanners and scribing dividers excel at marking centre points and contour lines on hardened steel and other workshop materials, reducing scrap and ensuring consistent part fit. Made from hardened tool steel and fitted with wear-resistant tips, they provide durable, repeatable performance for layout, inspection and jig preparation. Integrating these tools into your workflow improves dimensional control, speeds up set-up and supports quality assurance across production environments.
2000mm Rod Caliper With Carbide Tips, Flat Square Beam, 105mm Jaws - Metav IndustryLine
Take advantage of the combination of a 2,000 mm measuring range, replaceable carbide tips and a fine‑adjustment screw for stable, reproducible large‑format checks — order the caliper directly via Metav Werkzeuge or contact our consultants for application advice. Rod divider caliper M201.177 — 2,000 mm range with replaceable carbide tips (Metav IndustryLine) Rod divider caliper M201.177 is a long‑range measuring instrument designed for large components and heavy workshop applications, offering a robust beam and durable carbide measuring points. Long 2,000 mm measuring range Replaceable carbide measuring tips Fine‑adjustment screw for precise setting Matt‑chrome vernier on stainless steel Large‑format precision where stiffness matters This long‑range measuring instrument provides a 0–2000 mm span that is classified in our Long category for calipers up to 2,000 mm. The substantial mass and construction (approx. 30 kg) contribute to high stiffness, which reduces deflection during measurement and improves reproducibility when checking large housings, fixtures or long shafts. The benefit is fewer repeated measurements and quicker acceptance tests on the shop floor, saving time in repetitive production checks. Durable carbide tips for repeatable contact Wear resistance is a core advantage of the tip system: the device features replaceable carbide tips, designed for prolonged service in abrasive environments. Each tip measures 105 mm, providing a reliable contact surface that keeps the nominal geometry intact over many cycles. The result is lower maintenance cost and predictable measurement behaviour compared with soft‑tipped instruments, especially when measuring rougher or harder component faces. Fine control for accurate setting and reading A dedicated fine adjustment mechanism combined with a matt‑chrome vernier scale enables careful positioning of the beam and accurate analogue readings. This arrangement supports controlled alignment of the measuring faces and reduces parallax or overshoot during manual operation. For workshop staff, that means faster set‑ups and improved confidence in pass/fail decisions when tolerance windows are narrow. Built for industrial handling and long service life Constructed from stainless steel with corrosion‑resistant finishes, the instrument tolerates routine workshop conditions while delivering consistent performance. The design suits heavy‑duty environments where robust construction and minimal service intervals are priorities. As part of the Metav IndustryLine, this long‑range caliper supports centralised procurement strategies — one dependable tool that covers large‑format measurement tasks across diverse production areas. Contact Metav Werkzeuge in Emmerich for specification confirmation or to arrange delivery of the Metav IndustryLine rod divider caliper M201.177 — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com for direct consultation and logistics details Technical data SKU: M201.177 GTIN: 4054469100920 ECLASS: 21170344 Customs tariff: 90173000 Name: Rod divider caliper 0–2000 mm with replaceable carbide tips Facts Measuring range: 0–2000 mm Weight: 30 kg Tip length: 105 mm Classification: Long (1,000–2,000 mm) Finish: Matt chrome plated Special features Material: stainless steel with vernier Replaceable carbide measuring tips Fine‑adjustment screw for precise positioning Analog vernier (nonius) scale FAQ What is the measuring range of this caliper? The rod divider caliper M201.177 from Metav IndustryLine offers a measuring range of 0–2000 mm suitable for large components. Are the measuring tips replaceable? Yes — the instrument is equipped with replaceable carbide tips, ensuring long service life and straightforward renewal of wear parts. Is a fine‑adjustment mechanism provided? A fine‑adjustment screw is included to allow precise positioning of the beam and controlled contact during measurements. What material and finish does the beam have? The beam and scale are made from stainless steel with a matt‑chrome finish on the vernier for corrosion resistance and clear readings. Which workshop applications suit this caliper best? The long‑range design is intended for large‑format measurement tasks in heavy machining, fixture and mould work where stiffness and repeatability are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
2000mm Rod Divider With Carbide Scribing Tips Ø25x100, Stainless Steel - Metav IndustryLine
Take advantage of the stainless steel construction and carbide scribing tips for robust, long‑range marking up to 2,000 mm; the solid 19 mm rod and 5 kg build ensure stability and repeatable results in workshop use. Order the beam compass directly via Metav Werkzeuge or consult our advisors for specification support. M201.277 Beam Compass 2000 mm with Carbide Scribing Tips (Metav IndustryLine) The M201.277 beam compass is a long‑reach marking instrument for scribing and layout work on large components, offering a 2,000 mm span and carbide tips for durable, precise scoring. Range up to 2,000 mm Constructed from stainless steel Fitted with carbide scribing tips Strong 19 mm rod, approx. 5 kg Stable long‑range marking for large components The beam compass is built for reliable, repeatable layout where extended reach matters. Its 2,000 mm span places it in the long‑range category for measuring and marking sizeable parts, combining reach with manageable handling. The robust 19 mm rod gives high profile stiffness, which reduces deflection during scribing; this results in more consistent centre lines and circles across the full span. The solid mass of the instrument (approx. 5 kg) helps maintain contact pressure and steadiness when working on plate, sheet or assemblies. Durable scribing performance with carbide tips Equipped with carbide (hard‑metal) scribing tips, the instrument resists wear and maintains a sharp contact point for extended use in the workshop. Carbide tips are particularly suited to repeated scoring on harder surfaces and provide a clean, visible line that speeds subsequent machining or positioning tasks. The tip geometry (Ø25 x 100 mm) offers a generous contact area for stability while allowing precise marking, reducing the need for repeat passes. Practical design for everyday industrial use Constructed from stainless steel, the compass withstands routine workshop conditions and offers corrosion resistance in humid or metalworking environments. The analogue design keeps the tool simple and serviceable: no electronics, no batteries, and immediate readiness. Compatibility information indicates suitability for diameter work up to 4,000 mm, making the instrument appropriate for layout on large wheels, rings, or circular flanges where extended circumferential marking is required. Handling, setup and workshop benefits The instrument's weight and rod diameter deliver a balance between rigidity and manoeuvrability: heavy enough to damp vibration during scribing, yet compact enough for manual positioning by one technician. The mechanical nature simplifies maintenance and inspection routines, and the clear, mechanical adjustment allows fine placement before marking. For production or prototyping environments, the compass serves as a dependable tool for transferring centre lines and radii without the complexity of powered devices. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine M201.277 beam compass into workshop workflows and for prompt supply from Emmerich. Technical data Article number: M201.277 GTIN: 4054469182780 Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com Weight: 5 kg Material: stainless steel Facts Measuring range: 0–2,000 mm Maximum range: 2,000 mm Rod diameter: 19 mm Tip size: Ø25 x 100 mm Features Analogue design (mechanical) Supplied with carbide scribing tips Suitable for diameter work up to 4,000 mm Robust long‑range layout instrument ECLASS: 21170344 FAQ How large a span can be marked with this beam compass? The M201.277 beam compass covers a span up to 2,000 mm and is intended for long‑reach layout tasks in the workshop. Are the scribing tips wear‑resistant? Yes, the instrument is fitted with carbide scribing tips; these hard‑metal points provide durable, wear‑resistant marking for extended use. Is the compass suitable for very large diameters? The device is suitable for diameter work up to 4,000 mm, making it appropriate for marking large wheels, rings and flanged components. What is the instrument's weight and how does it affect handling? With a weight of approximately 5 kg and a 19 mm rod, the compass offers stability and reduced vibration during scribing while remaining manageable for manual setup. Is this a digital tool or a mechanical instrument? This is an analogue, mechanical beam compass designed for straightforward, serviceable operation without electronic components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Bow Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the hardened steel build and riveted hinge for reliable, repeatable layout work; the 200 mm span balances reach and control for most workshop tasks. Order directly via Metav Werkzeuge or consult our technical advisors for specification guidance. Bow-point divider M214.212 — 200 mm, hardened steel, riveted hinge (Metav IndustryLine) A Bow-point divider M214.212 designed for precise scribing, transfer measurements and layout work in metalworking and general workshop environments. Hardened steel construction 200 mm span for common workshop tasks Riveted hinge for stable joint action Conforms to DIN 6486 standard Precise layout with balanced reach and stiffness The bow-point divider is engineered to combine a practical measuring span with dimensional stability: the 200 mm length gives access to typical workshop components while remaining easy to handle. Manufactured from hardened steel, the instrument resists wear at the contact points, which preserves precision over prolonged use. The light overall mass (0.2 kg) reduces user fatigue during repetitive marking tasks and supports steady hand control — an important factor when repeatable layout is required in production or assembly work. Stable joint and consistent marking performance A riveted hinge provides a secure pivot that minimises unwanted play and ensures consistent distance between the scribing points under load. Compared with simpler clamps or loose joints, this fixed hinge concept improves reproducibility when transferring measurements or inscribing circles. The result is a reliable, maintenance‑friendly tool that keeps alignment even when used on tougher surfaces, aiding efficient workflow in workshop and fabrication contexts. Standards and material benefits explained Conformity to DIN 6486 indicates the product meets established norms for dividers and compasses, so expectations for form and function are clear. The hardened steel construction contributes to edge retention at the points and reduces deformation during contact marking, which is crucial when working on metal parts or hardened substrates. These material choices mean fewer tool adjustments and a longer service life, supporting economical operation across many applications. Suited tasks and who will benefit most This instrument is ideal for layout, scribing of circles and arcs, and transferring distances in metalworking, fabrication and toolroom use. The design suits both bench work and portable marking tasks: compact enough for fine-detail jobs yet long enough for common workshop components. Workshop technicians, toolmakers and maintenance teams will value the combination of stability, wear resistance and straightforward handling that the divider delivers. For secure supply and expert advice on the M214.212 bow-point divider from Metav IndustryLine, contact Metav Werkzeuge in Emmerich to arrange purchase or discuss technical suitability; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M214.212 GTIN: 4054469107271 Eclass: 21170305 Tariff number: 90172039 Core measurements Length: 200 mm Weight: 0.2 kg Materials & features Material: hardened steel Riveted hinge Standard: DIN 6486 Manufacturer: Metav IndustryLine FAQ What tasks is the bow-point divider suited for? The bow-point divider M214.212 is intended for scribing, transferring measurements and inscribing circles in metalworking, fabrication and general workshop tasks. What are the advantages of the hardened steel construction? Hardened steel on the M214.212 increases wear resistance at the points and helps maintain accurate marking over time, reducing the need for frequent rework. How does the riveted hinge affect performance? The riveted hinge on this divider provides a stable pivot with minimal play, improving repeatability when laying out dimensions or marking arcs. Does the instrument meet any standards? Yes, the divider conforms to DIN 6486, which defines form and functional characteristics for dividers and compasses. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Carbide-Tipped Divider With Riveted Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of carbide tips, a hardened steel body and a stable rivet joint to secure precise, repeatable scribing over time; order the tool directly via Metav Werkzeuge or contact the consultants for tailored advice. Carbide-Tipped Point Divider — 200 mm, rivet joint (Metav IndustryLine) The Carbide-Tipped Point Divider is a precision marking instrument for layout, scribing and distance transfer in metalworking and general workshop applications Carbide tips for long-lasting precision Hardened steel construction for robustness Rivet joint for stable adjustment Complies with DIN 6486 standard Consistent, long-term accuracy for layout and marking The combination of carbide tips and a hardened steel frame delivers durable performance where repeatable marks matter. The wear resistance of the carbide points reduces rework and downtime, while the solid leg geometry maintains alignment during use. This design ensures that each scribe and transfer stroke remains true, supporting faster setup and fewer measurement checks—a clear efficiency advantage in production and layout tasks. Stable adjustment for reproducible workpieces A rivet joint provides secure, low‑play adjustment that resists creeping under light manual pressure. The robust joint geometry, together with the stiff steel legs, enables precise spacing and maintenance of set dimensions during serial marking. Compliance with DIN 6486 underlines the tool’s suitability for workshop standards, making it a reliable instrument for repeatable processes and quality checks in tooling and fabrication environments. Practical handling and versatility in workshop use Engineered for everyday workshop use, this divider combines precision with ergonomic handling and a balanced weight for comfortable operation during extended tasks. The tool suits a range of applications from panel layout to scribing arcs and transferring measurements between fixtures. Its straightforward design minimises maintenance and keeps the focus on productive work rather than tool adjustment, supporting consistent output in both small-scale and industrial settings. Select the Metav IndustryLine Carbide-Tipped Point Divider for enduring precision and dependable workshop performance — contact Metav Werkzeuge for ordering or technical guidance. Technical data SKU: M214.202.H GTIN: 4054469159249 Customs tariff: 90172039 Facts Length: 200 mm Weight: 0.18 kg Standard: DIN 6486 Special features Material: hardened steel Tip material: carbide Joint type: rivet joint Category: dividers / compasses FAQ What materials can be scribed with this divider? The Carbide-Tipped Point Divider is designed primarily for metalworking and will scribe steels and non-ferrous metals effectively thanks to its carbide tips. Is the joint adjustable without tools? Yes, the rivet joint offers stable, manual adjustment to set and hold distances during marking operations. Does this divider meet recognised standards? The instrument complies with DIN 6486, indicating suitability for workshop and industrial layout tasks. What is the typical application for a 200 mm divider? A 200 mm leg length provides a practical balance of reach and stiffness, ideal for general workshop layout, panel marking and transfer measurements. Which brand manufactures this product? This divider is offered by Metav IndustryLine and supplied via Metav Werkzeuge, ensuring a European quality and logistics backbone. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Compass With Pencil Holder, Hardened Steel, DIN 6486 - Metav IndustryLine
Robust, precisely finished and compliant with DIN 6486, the compass delivers a consistent 200 mm span and hardened-steel durability for reliable layout and marking – order the drawing compass directly via Metav Werkzeuge or consult our specialists for application guidance. Drawing compass with pencil holder M214.242 — 200 mm, hardened steel (Metav IndustryLine) The Drawing compass with pencil holder M214.242 is a 200 mm drafting instrument designed for precise layout, technical drawing and general workshop marking tasks. 200 mm working span Hardened steel construction Integrated pencil holder Conforms to DIN 6486 Precision where it matters The M214.242 combines a 200 mm reach with hardened steel components to provide stable, repeatable marks across a variety of workshop tasks. Conformity with DIN 6486 signals that the instrument meets established dimensional and functional standards, which reduces uncertainty when transferring drawings to metal or other materials. The instrument’s construction minimises flex during use, so each scribe or guide line remains consistent; this reliability shortens rework cycles and supports quality control processes. Practical handling and dependable detailing Designed as a straightforward drafting tool, this compass features an integrated pencil holder that accepts standard leads and keeps the marking implement secure during measurement and scribing. At approximately 0.2 kg, the device balances solidity with manoeuvrability, enabling fine adjustments without excess weight. The simple adjustment mechanism gives controlled movement for accurate radii, while the robust finish resists routine wear in the workshop. Such practical features reduce setup time and make the instrument suitable for both drawing boards and bench use. Built for everyday workshop and drawing-room use As a classic divider and layout aid, the instrument is well suited to technical drawing, pattern marking and general layout duties in metalworking, joinery and education. Its durable steel build and standards compliance mean it can be relied upon as a daily-use tool in production or prototyping environments. Clear, simple geometry and dependable alignment ensure that measured radii and transferred centres remain true, supporting downstream operations and inspection routines. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine drawing compass M214.242 or to discuss suitability for specific production applications Technical Data Article number: M214.242 GTIN: 4054469107547 Tariff number: 90172039 Facts Length / span: 200 mm Weight: 0.2 kg Special features Material: steel, hardened Standard: DIN 6486 Feature: integrated pencil holder FAQ What is the working span of this compass? The drawing compass with pencil holder M214.242 (Metav IndustryLine) provides a 200 mm span suitable for common layout and drafting tasks. What material is the instrument made from? The M214.242 is manufactured from hardened steel, chosen for stiffness and wear resistance in routine workshop use. Does the compass comply with any standards? Yes, the instrument conforms to DIN 6486, ensuring consistent functional and dimensional characteristics for technical applications. Is the pencil holder compatible with standard leads? The integrated pencil holder on the Metav IndustryLine drawing compass M214.242 accepts standard graphite leads and makes replacement straightforward. For which applications is this compass best suited? The M214.242 is recommended for technical drawing, marking out, pattern work and general workshop layout where a reliable 200 mm span and durable construction are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Divider Caliper With Carbide Tips 0.1mm Nonius Locking, Hardened Special Steel - Metav IndustryLine
The 200 mm divider calliper combines a hardened special-steel construction with carbide tips and a 0.1 mm vernier, delivering durable, repeatable measurements for everyday workshop tasks; order the instrument directly via Metav Werkzeuge or contact our consultants for advice. M201.171.H divider calliper — 200 mm, carbide tips, 0.1 mm vernier M201.171.H is an analogue divider-style calliper designed for precise marking and measurement tasks in metalworking and toolmaking, offering robust wear resistance and clear vernier reading for standard workshop use. Hardened special steel construction Carbide measuring tips for wear resistance 200 mm range with 0.1 mm vernier Locking screw for repeatable settings Precise, wear‑resistant construction for reliable results The instrument’s frame is made from hardened special steel, which provides stiffness and dimensional stability during routine workshop use. Fitted with carbide tips, the device resists edge wear where contact is most frequent, maintaining accuracy over prolonged use. The 0.1 mm vernier allows precise analogue reading, making the calliper well suited to checks where straightforward, traceable measurements are required rather than digital readout convenience. These material and design choices reduce the need for frequent replacement and support consistent, repeatable measurement results. Designed to match standard workshop workflows With a measuring span classified as a Standard range instrument (0–200 mm), the calliper balances reach and rigidity—ideal for common machine‑shop tasks such as checking diameters, step heights and set distances on jigs and fixtures. The matt chrome‑plated vernier and scale minimise glare under bright workshop lighting, while the locking screw secures settings for transfer or repetitive measurements. The analogue mechanism provides immediate tactile feedback and a direct mechanical reference that fits established inspection routines in maintenance and production environments. Clear application scope and dependable quality This divider‑style calliper fulfils measurement needs across toolmaking, maintenance and general metal fabrication where a robust, simple instrument is preferred. The combination of hardened frame and carbide tips reduces measurement drift caused by tip deformation, and the vernier resolution supports concise conformity checks against drawing tolerances. Packaged as part of the Metav IndustryLine, the tool is aimed at workshops seeking durable, no‑nonsense measuring equipment that complements existing inspection chains and fixture setups. Request further specification sheets or consult Metav Werkzeuge for application advice and supply details — contact Metav Werkzeuge directly by e‑mail or phone for personalised support. Technical data Article number: M201.171.H GTIN: 4054469164274 EClass: 21170344 Customs tariff number: 90173000 Facts Measuring range: 0–200 mm Resolution (vernier): 0.1 mm Analogue: yes Special features Material: hardened special steel; matt chrome‑plated vernier and scale Measuring tips: carbide Category: Messschieber / callipers Brand: Metav IndustryLine FAQ What accuracy can be expected from this divider calliper? The divider calliper M201.171.H uses an analogue vernier with a 0.1 mm resolution; combined with the hardened frame and carbide tips this yields stable, workshop‑level accuracy suitable for standard inspections. Is the M201.171.H suitable for marking and transferring distances? Yes, the divider‑style geometry and carbide tips make the M201.171.H appropriate for precise marking, transferring and distance checks on metal components and tooling. Which materials is this instrument intended to work with? The calliper is intended for general-purpose workshop use on metallic components; the carbide tips and hardened frame provide durability where contact with steel and similar materials is frequent. Does the M201.171.H include a locking mechanism for repeat measurements? Yes, the instrument is equipped with a locking screw to secure settings for repeatable measurements and transfer tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Internal Spring Compass, Hardened Steel, DIN 6487 - Metav IndustryLine
Take advantage of the combination of hardened steel construction, DIN 6487 conformity and a 200 mm reach for consistent internal scribing and layout work; order the spring‑loaded internal probe directly via Metav Werkzeuge or consult our specialists for application advice. Spring‑loaded internal probe, 200 mm (Metav IndustryLine) — hardened steel, DIN 6487 compliant The Spring‑loaded internal probe, 200 mm is a spring-mounted internal measuring probe designed for precise internal scribing and layout tasks in metalworking and toolmaking applications. Hardened steel construction 200 mm reach for internal layout Conforms to DIN 6487 Spring‑loaded contact for stable marking Consistent internal marking for repeatable workflows The spring‑mounted contact provides a steady contact force, ensuring repeatable internal scribing across multiple components. With a clear 200 mm span, this probe is sized to reach deeper bores and larger internal diameters than shortpoint compasses, while maintaining the control expected in layout work. The spring mechanism reduces the risk of point bounce during rotation, which improves centreline accuracy and reduces rework. As a simple mechanical solution, it combines low complexity with dependable performance, making it suitable for task lists where consistent geometry transfer is required. Robust build and standards for long service life Constructed from hardened steel and manufactured to the requirements of DIN 6487, this probe is specified for durability under workshop conditions. Hardened material and a compact design reduce wear at the contact point and maintain geometry even with frequent use. Compliance with DIN 6487 offers a clear technical reference for procurement and quality assurance, supporting integration into inspection routines and drawings. The solid construction minimises deformation during handling, which preserves the original alignment and contributes to long‑term measurement stability. Practical handling and application versatility The spring action facilitates controlled one‑hand operation and smooth engagement with internal features, helping to speed layout and scribing tasks without sacrificing precision. This accessory is tailored to use with compasses and divider setups where an internal probing point is required for circle or bore marking, making it a practical addition to toolrooms, maintenance shops and production benches. The straightforward design also simplifies maintenance and replacement: fewer moving parts mean less downtime and consistent readiness for layout operations. Contact Metav Werkzeuge for specific application guidance and reliable supply of Metav IndustryLine spring‑loaded internal probes. Technical data Article number: M214.812 GTIN: 4054469183138 ECLASS: 21170336 Category: Compass (Zirkel) Facts Overall length: 200 mm Brand: Metav IndustryLine Special features Material: hardened steel Standard: DIN 6487 Function: spring‑loaded internal probe for scribing and layout FAQ What is the primary purpose of this probe? The Spring‑loaded internal probe is intended for internal scribing and layout tasks in metalworking and toolmaking, providing a spring‑mounted contact for repeatable internal markings. Which standard does the product meet? This Metav IndustryLine probe complies with DIN 6487, ensuring it meets recognised workshop and procurement specifications. What material is the probe made from? The probe is manufactured from hardened steel, giving wear resistance and dimensional stability under normal workshop use. Can this probe be used with standard compass setups? Yes, the probe is designed as an accessory for compass/divider arrangements where an internal probing or scribing point is required; compatibility should be checked against the specific compass model. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Point Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the combination of 200 mm reach, hardened steel construction and a riveted hinge for reliable scribing and layout work; secure consistent results with a tool built to DIN 6486 standards. Order the divider directly via Metav Werkzeuge or consult our advisors if further specification is required. Pointed Divider M214.202 — 200 mm divider with riveted hinge, hardened steel (Metav IndustryLine) The Pointed Divider M214.202 is a 200 mm workshop divider for precise layout, transferring measurements and scribing circles in metalworking and engineering applications. 200 mm span for standard workshop tasks Hardened steel construction for durability Riveted hinge for stable leg alignment Complies with DIN 6486 for drawing instruments Precise layout with dependable leg stability The divider delivers consistent marking and transfer thanks to its riveted hinge, which preserves leg alignment under repeated use. The 200 mm span provides a balance between reach and control suitable for many bench and layout tasks, while the hardened construction reduces wear on contact points. For production and prototyping environments, these design choices translate into fewer setup errors and a predictable workflow when transferring dimensions or scribing arcs. Robust materials that reduce maintenance Made from hardened steel, the instrument resists deformation and maintains point geometry over time, cutting the need for frequent reconditioning. Compliance with DIN 6486 confirms its suitability as a drawing instrument in technical workshops. The straightforward mechanical design avoids electronics or consumables, so upkeep is limited to occasional point sharpening and hinge inspection, a practical advantage in busy shop-floor settings looking to keep measurable downtimes low. Practical use across metalworking and engineering The divider is optimised for metal fabrication, modelling and general engineering layout where controlled scribing and measurement transfer are required. Its simple, mechanical operation makes it a reliable choice for marking out circles, arcs and distances on a variety of surfaces. The tool's clear geometry supports repeatable results, which is particularly valuable when several identical parts must be produced or when dimensions must be conveyed from drawing to workpiece with confidence. Contact Metav Werkzeuge for advice on integrating the M214.202 into workshop standards and to arrange swift supply from our Emmerich facility Technical Data Article number: M214.202 GTIN: 4054469107202 Customs tariff number: 90172039 eClass: 21170305 Facts Length: 200 mm Standard: DIN 6486 Special features Material: hardened steel Hinge: riveted hinge Category: divider / scribing instrument Manufacturer: Metav IndustryLine FAQ What materials is the divider suitable for? The divider (Pointed Divider M214.202) is designed primarily for marking and layout on metal and general workshop materials; the hardened steel points maintain form on typical engineering surfaces. Is the hinge adjustable or fixed? The riveted hinge provides a fixed, stable pivot joint that maintains leg alignment; occasional lubrication preserves movement without introducing play. Does the instrument conform to any standards? Yes, the tool is produced in accordance with DIN 6486, confirming its designation as a drawing instrument for technical use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Spring External Divider Hardened Steel, DIN 6487 - Metav IndustryLine
Take advantage of a hardened steel construction together with DIN 6487 conformity and a precise 200 mm measuring length for dependable external gauging in everyday workshop use. Order the component via Metav Werkzeuge or consult our advisers for application-specific guidance. Spring-Loaded External Caliper M214.802 — 200 mm, hardened steel (DIN 6487) | Metav IndustryLine The Spring-Loaded External Caliper M214.802 is a compact, spring-actuated tool designed for precise external measurements in metalworking and general workshop applications Spring-actuated jaw movement for consistent contact Hardened steel construction for long service life Conforms to DIN 6487 for reliable standard compliance 200 mm measuring length for common workshop tasks Consistent contact for reliable external measurements The spring-loaded mechanism provides a defined contact action that reduces variance caused by manual pressure, improving repeatability for routine external measurements. Conformance with DIN 6487 ensures the tool meets recognised dimensional standards, making it suitable for use in inspection benches and production checks. The 200 mm span balances reach and rigidity so that measurements of shafts, collars and housings remain reproducible without sacrificing handling. Built to withstand workshop demands Constructed from hardened steel, this caliper is designed for robust use where resistance to wear and mechanical stress matters. The material choice increases resistance to abrasion and retains jaw geometry over time, which translates into fewer recalibrations and lower life‑cycle costs. As a simple, maintenance-friendly instrument, it complements standard measuring sets in machining and maintenance departments where reliability and quick turnarounds are priorities. Quick handling and practical integration The spring action allows fast, single‑handed operation for gauging external diameters and distances, supporting efficient workflow during repetitive tasks. Its straightforward design enables easy cleaning and inspection; parts subject to wear can be checked and replaced without complex procedures. Supplied as a workshop-ready instrument, it integrates seamlessly into standard tooling kits and supports consistent quality checks across small-batch production or repair workspaces. For tailored advice or to secure supply from Metav Werkzeuge in Emmerich, contact our specialists who can confirm suitability for the intended application and delivery options Technical Data Article number: M214.802 GTIN: 4054469183091 Material: hardened steel Standard: DIN 6487 Facts Overall length: 200 mm Special features Spring-loaded jaw movement Category: compass / caliper tool Brand family: Metav IndustryLine FAQ What is the main advantage of the spring-loaded mechanism? The spring-loaded external caliper delivers a consistent contact force, which improves reproducibility of external measurements and reduces operator-related variation. Is the material suitable for regular workshop use? Yes, the hardened steel used for this caliper ensures wear resistance and long-term retention of jaw geometry, making it well suited to frequent use in machining environments. Which standard does the caliper comply with? The instrument is manufactured to DIN 6487, providing assurance that dimensional and design criteria meet established industrial norms. Can this caliper be used for measuring shafts and collars? The 200 mm measuring length and spring-actuated jaws make it appropriate for measuring external diameters such as shafts, collars and housings in general workshop and maintenance tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
200mm Vernier Caliper with Dial Lock, Hardened Tips, 0.1mm Resolution - Metav IndustryLine
Take advantage of the 0.1 mm vernier resolution, hardened measuring tips and matt‑chromed scale to ensure repeatable workshop measurements; order directly via Metav Werkzeuge or consult our specialists for application advice. Zirkel caliper M201.171 — 200 mm analogue caliper with 0.1 mm vernier (Metav IndustryLine) The Zirkel caliper M201.171 is an analogue, compass‑style caliper designed for general engineering and metalworking tasks up to 200 mm, offering robust jaws and a secure locking screw for stable readings Analogue vernier 0.1 mm resolution Hardened measuring tips for long life Matt‑chromed scale for low glare readings Locking screw for stable measurement Stable, workshop‑grade precision for everyday measurement The instrument provides analogue vernier reading with a resolution of 0.1 mm, making it a reliable choice for routine checks and machining set‑ups where quick, repeatable readings are required. The vernier system is mechanical and does not rely on batteries, which reduces downtime and simplifies workshop use. For users familiar with vernier operation, the scale allows straightforward subtraction and transfer of values; for those new to the method, the vernier principle can be explained in a few steps and delivers consistent results when the sliding jaw is fixed with the locking screw. This balance of simplicity and repeatability supports efficient process control on the shop floor. Built for repeatability: hardened steel and anti‑glare scale Constructed from special hardened steel, the body and jaws resist wear while the hardened measuring tips maintain accurate contact geometry over repeated cycles. The matt‑chromed scale and vernier minimise reflections under strong workshop lighting, improving legibility and reducing read‑back errors. The locking screw (Feststell) secures the slider after adjustment, which is especially useful when transferring measurements between fixtures or when measuring outside diameters with the compass arms. Classified as a Standard caliper (100–300 mm class) due to its 200 mm measuring range, the design offers the best compromise between reach, stiffness and single‑handed handling for everyday machine‑shop tasks. Practical handling and typical applications in the workshop As a compass‑style analogue caliper, the tool is particularly suited to tasks such as setting up fixtures, measuring external diameters and checking component steps where a robust mechanical instrument is preferred over electronics. The hardened tips and solid shaft reduce sensitivity to knocks and abrasion, so the instrument remains dependable in a busy environment. The simple mechanical construction also eases maintenance: occasional cleaning and lubrication of the slide keep the instrument functioning accurately for extended periods. For quality assurance, the caliper integrates neatly into inspection routines where vernier measurements are an established method. For dependable workshop precision from the Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering or technical clarification at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M201.171 GTIN: 4054469100845 ECLASS: 21170344 Tariff number: 90173000 Manufacturer: Metav IndustryLine Facts Measuring range: 0–200 mm Resolution: 0.1 mm Operation: Analogue vernier reading Type: Compass‑style caliper Special features Material: special steel, hardened Scale: matt‑chromed vernier and scale Measuring tips: hardened Locking screw: Feststell for secure readings Classification: Standard caliper (100–300 mm class) FAQ How is the vernier scale read on this instrument? The vernier provides 0.1 mm steps; align the vernier line with the main scale to determine the fractional reading, then add the vernier value to the main scale to obtain the measurement with the caliper M201.171. What workshop tasks suit a compass‑style caliper? Typical uses include external diameter checks, step and depth transfers and fixture set‑up in general engineering and metalworking; the Standard‑range design offers reach and stiffness appropriate for routine machine‑shop work. Is the instrument robust enough for daily use? Yes, the hardened measuring tips and special hardened steel body ensure wear resistance; the matt‑chromed scale reduces glare and the locking screw secures measurements during transfer. Does the caliper come with a calibration certificate? The standard delivery does not include an ISO 17025 certificate by default; calibration options can be arranged if traceable certification is required for quality systems. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Bow Divider With Riveted Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of robust hardened steel construction, a 250 mm working span and a riveted hinge for stable, repeatable layout work; order the divider directly via Metav Werkzeuge or contact our consultants for specification advice. Bow divider, rivet hinge, 250 mm — Metav IndustryLine A Bow divider, rivet hinge, 250 mm designed for precise distance transfer and scribing in metalworking, fabrication and general workshop layout. Hardened steel construction for durability 250 mm span for standard workshop tasks Riveted hinge for stable, repeatable settings Manufactured to DIN 6486 for quality assurance Consistent marks and long service life The instrument is built from hardened steel, which provides wear resistance and sustained edge retention for scribing and layout operations. The choice of material reduces the need for frequent reprofiling, translating to fewer interruptions in production. The 250 mm span delivers a practical reach that balances accessibility with rigidity, ensuring consistent marks over repeated use and helping to maintain process stability on the shop floor. Stable hinge and handling for precise transfers A riveted clamp-style hinge gives the device secure, vibration-resistant locking and prevents unintended drift during layout. This rivet hinge design keeps the legs aligned under light manual pressure, which supports repeatable settings when transferring distances between components or during templating tasks. The instrument’s weight and balance are tuned for single-handed adjustment while preserving the positional integrity required for accurate scribing. Conforms to workshop standards and supports quality workflows Produced to DIN 6486, the tool meets recognised workshop standards for construction and safety, easing integration into inspection routines and quality documentation. The simple mechanical design requires no power, offers immediate readiness and minimises maintenance needs, which supports efficient workflows in both small fabrication shops and larger production environments. Traceable identification such as GTIN and article number allow straightforward inventory and ordering processes. Contact Metav Werkzeuge for detailed technical clarification and to order the Metav IndustryLine bow divider with 250 mm span and hardened-steel construction Technical Data Article number: M214.213 GTIN: 4054469107288 ECLASS: 21170305 Tariff number: 90172039 Standard: DIN 6486 Material: Hardened steel Core technical data Working length: 250 mm Special features Riveted hinge for secure locking Robust workshop design Suitable for general metalworking layout Category: Dividers / compasses FAQ Is the hinge suitable for precise, repeatable layout work? The riveted hinge on the bow divider M214.213 (Metav IndustryLine) provides stable locking and alignment to support precise, repeatable layout operations. What material is the tool made from and why does it matter? The instrument is made from hardened steel, which offers increased wear resistance and longevity for scribing tasks in fabrication and metalworking. Which standard does this divider comply with? This Metav IndustryLine divider is manufactured to DIN 6486, ensuring conformity with common workshop and safety standards. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Carbide-Tipped Divider, Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Robust carbide points, a hardened steel frame and a riveted hinge combine to deliver repeatable scribing and long service life across the full 250 mm span; benefit from reliable workshop layout and low upkeep. Order the divider directly via Metav Werkzeuge or consult their specialists for application advice. Carbide‑Tipped Divider M214.203.H — Riveted hinge, 250 mm Carbide‑Tipped Divider M214.203.H for precise scribing and layout work in metalworking and general workshop applications Riveted hinge for secure joint Carbide points for extended wear resistance Hardened steel construction for stiffness Conforms to DIN 6486 standard Precision that reduces rework and saves time The combination of carbide points and a hardened steel frame gives this divider exceptional wear resistance and structural stiffness. The tool holds a sharp scribe line for longer, which reduces the need for repeated marking and therefore decreases set‑up time on repetitive tasks. The riveted joint is designed to maintain consistent leg separation under normal shop use, delivering repeatable marking across the full 250 mm working span and supporting efficient layout workflows. Industrial standard and dependable handling for workshop use Conformity with DIN 6486 confirms the geometric and functional design expected from a precision layout instrument. With a 250 mm reach the divider addresses typical workshop requirements for component marking, pattern transfer and centre‑finding on medium‑sized parts. The riveted hinge avoids unintended loosening, creating a stable feel during operation and enabling accurate scribing without constant readjustment. These attributes combine to support faster, more reliable measurement and marking tasks. Practical applications and straightforward maintenance Designed for routine use in metalworking, fabrication and toolroom tasks, the carbide tips deliver superior abrasion resistance compared with plain steel points, prolonging service intervals. The robust construction minimises deformation during use, so the divider remains true over time and lowers the total cost of ownership through reduced replacement frequency. Basic upkeep is limited to keeping the hinge and points clean; the simple design favours quick visual inspection and immediate readiness for work. For robust layout and long‑life performance choose the Metav IndustryLine carbide‑tipped divider M214.203.H and contact Metav Werkzeuge for tailored application advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M214.203.H EAN / GTIN: 4054469159256 Material: Hardened steel Length: 250 mm Standard: DIN 6486 Facts Working span: 250 mm Tariff number: 90172039 Category: Divider / Compass eClass: 21170305 Special features Carbide (hardmetal) points Riveted hinge (nietscharnier) Hardened steel construction Suitable for workshop layout and scribing FAQ What materials is the divider intended for? The carbide‑tipped divider M214.203.H is designed primarily for marking and scribing on metal and other hard materials where abrasion resistance is required; the carbide points extend service life compared with plain steel tips. How does the riveted hinge affect accuracy? A riveted hinge gives the divider a secure, low‑play joint that maintains leg position during marking, helping the M214.203.H provide consistent, repeatable scribing without frequent readjustment. What does conformity to DIN 6486 mean for workshop use? Compliance with DIN 6486 indicates that the instrument meets recognised dimensional and functional expectations for layout compasses, supporting predictable handling and interchangeability in professional environments. Can the carbide points be replaced or serviced? The carbide points on this model are fitted for extended wear; routine maintenance focuses on keeping the tips clean and the hinge free of debris. For specialised repair or replacement, refer to Metav Werkzeuge’s service guidance. Which tasks are best suited to this divider? The M214.203.H is ideal for centre‑finding, scribing circles and transferring measurements on medium‑sized components in fabrication, toolmaking and general workshop layout work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Internal Caliper With Riveted Hinge, Steel, DIN 6482 - Metav IndustryLine
Take advantage of the robust steel construction, the rivet hinge for stable alignment and the 250 mm leg length for reliable internal measurement and marking. Order the internal divider directly via Metav Werkzeuge or ask our consultants if needed. Internal divider M214.223 — Rivet-hinge internal scribing tool, 250 mm (Metav IndustryLine) The Internal divider M214.223 serves as a workshop instrument for internal measurement, marking and transferring dimensions in machining and assembly tasks Robust steel construction for long service life 250 mm leg length for larger internal spans Rivet hinge for stable and precise alignment Conforms to DIN 6482 for consistent manufacturing standards Stable internal measurement where repeatability matters The instrument's rivet hinge and one-piece leg design deliver mechanical stability that reduces play during measuring and marking operations. Built from steel, the tool maintains alignment under light working forces, which supports repeatable internal measurements across a production run. The 250 mm leg length provides the reach needed for medium-sized bores and housings while the compact mass (approx. 0.14 kg) makes the divider simple to handle and position. This combination of rigidity and light weight reduces measurement variance and speeds up fixture set-up or inspection tasks in routine shop-floor use. Designed for workshop robustness and standard compliance Compliance with DIN 6482 indicates that the tool meets recognised geometric and manufacturing tolerances for dividers and compasses, helping to ensure interchangeability and predictable behaviour in the workshop. The rivet hinge is a straightforward, low-maintenance fastening that avoids complex adjustments while preserving alignment over time. Where a durable, no-nonsense instrument is required for marking or transferring internal dimensions, this design minimises downtime and maintenance effort, making it suited to production, maintenance and quality-control environments. Practical handling that supports efficient workflows With its moderate length and low weight, the divider is easy to manipulate for internal scribing, transferring measurements between parts and checking inside clearances. The tool’s balanced feel and slim legs enable access into tighter cavities than bulkier gauges, while the resilient steel construction tolerates everyday workshop conditions. For machinists and fitters who need a reliable mechanical instrument for quick checks and layout tasks, the divider integrates directly into measurement routines and reduces reliance on larger measuring systems for simple internal tasks. Trusted distribution and practical application in production Distributed under the Metav IndustryLine umbrella, this instrument benefits from a European quality filter and logistics network that supports dependable supply to workshops and small production sites. The combination of simple, robust mechanics and conformity to a recognised standard makes it a pragmatic choice for everyday metrology needs: stable alignment, adequate reach and durable material. For users seeking a straightforward internal divider that performs consistently, the instrument offers a practical balance of performance and low operational complexity. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine internal divider M214.223 can be integrated into your inspection and layout processes and to receive tailored advice from our consultants Technical data Article number: M214.223 GTIN: 4054469107370 Eclass: 21170336 ETIM: EC000029 Facts Length: 250 mm Weight: 0.14 kg Tariff number: 90172039 Special features Material: Steel Hinge: Rivet hinge (rivet hinge) Standard: DIN 6482 Category: Divider (compass) Label: Internal divider, rivet hinge, 250 mm 0,12 kg FAQ How is the hinge designed to affect measurement stability? The rivet hinge provides a fixed, low-play pivot that keeps the legs aligned for consistent internal measurement and marking with the internal divider M214.223 from Metav IndustryLine. What sizes and reaches does the instrument support? The instrument offers a 250 mm leg length, making it suitable for medium internal spans such as housings and larger bores commonly encountered in workshop and assembly tasks. Is the tool suitable for routine shop-floor inspection? Yes. The steel construction and conformity with DIN 6482 make the internal divider M214.223 robust enough for regular workshop use and repetitive layout work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Outside Calliper With Riveted Hinge, Steel, DIN 6484 - Metav IndustryLine
Take advantage of the combination of robust steel construction, DIN 6484 conformity and a 250 mm working span to achieve reliable layout and marking in workshop environments; order the divider directly via Metav Werkzeuge or consult our specialists for application advice. M214.233 Outside scribing divider – 250 mm span, rivet hinge – Metav IndustryLine The M214.233 is a durable outside scribing divider with a rivet hinge and a 250 mm span, intended for precise marking and layout work in metalworking and general workshop use. Robust steel construction 250 mm working span Rivet hinge for stable alignment Complies with DIN 6484 standard Precise marking where repeatability matters A clear advantage of this tool is its 250 mm span combined with a rigid steel build, which supports consistent scribing across repeated operations. The rivet hinge provides a fixed pivot that minimises play during marking, translating geometric stability into fewer rechecks and faster setup times. Compliance with DIN 6484 signals that the instrument meets recognised workshop standards for form and function, so layout tasks for metal components and assemblies can be executed with predictable results. Built to withstand everyday workshop demands Designed for routine use, this divider balances robustness with manageable weight (approx. 0.1 kg), reducing operator fatigue during extended jobs while still resisting deformation under practical handling. The simple, one‑piece joint construction favours longevity and low maintenance, which supports continuous production workflows and reduces downtime for tool replacement. As a Metav IndustryLine product, it is offered with the supply reliability and quality assurance associated with a European distribution hub. Straightforward handling and serviceable design Adjustment and fine alignment are intuitive thanks to the riveted hinge and classic divider geometry; the legs remain parallel under typical working pressure, so single‑step repositioning is usually sufficient between measurements. Point maintenance follows standard workshop practice: light dressing of the scribing tips restores crisp traces without costly interventions. The tool is identified as SKU M214.233 for ordering and stock control, which simplifies procurement and ensures compatibility with existing marking routines. For tailored advice on integrating this Metav IndustryLine divider into production processes, contact Metav Werkzeuge for reliable supply and technical guidance from our Emmerich hub via +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: M214.233 GTIN: 4054469107462 Category: Zirkel Manufacturer: Metav IndustryLine Facts Length / span: 250 mm Weight: 0.1 kg Tariff number: 90172039 Special features Material: Steel Joint: Rivet hinge Standard: DIN 6484 eClass: 21170325 ETIM: EC000029 FAQ What is the primary use of this divider? The divider is intended for outside scribing and layout in metalworking and general workshop applications; the M214.233 divider from Metav IndustryLine is optimised for marking straight and curved components. Is the hinge adjustable or fixed? The product uses a rivet hinge that provides a stable, low‑play pivot for repeatable alignment; minor adjustment is possible during manufacture but it is designed for durable fixed performance. Can the divider be used on hardened surfaces? The divider is manufactured from steel and is suitable for standard layout tasks; if frequent contact with very hard or abrasive surfaces is expected, regular inspection of the scribing tips is recommended. How does the DIN 6484 standard affect everyday use? DIN 6484 defines form and dimensional aspects for dividers/compasses used in workshops; conformity ensures interchangeability and familiar handling characteristics for professional use Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
250mm Scriber Compass With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of a hardened-steel construction and a rivet hinge for stable, repeatable settings; the combination of robust materials and DIN 6486 conformity ensures reliable marking and layout work in the workshop. Order the pointed divider directly via Metav Werkzeuge or contact our consultants for specification advice. Pointed divider M214.203 — 250 mm, hardened steel, rivet hinge (Metav IndustryLine) The Pointed divider M214.203 is a workshop-grade marking and scribing divider with a rivet hinge, designed for precise transfer and layout tasks across metalworking and toolroom environments. Hardened steel construction for long service life Rivet hinge for stable, repeatable setting 250 mm span for workshop and toolroom marking Consistent precision for layout and transfer The divider delivers dependable precision for everyday marking tasks, thanks to its hardened-steel legs and firm hinge. The rivet hinge fixes the leg spacing securely, reducing play and drift during repeat operations; this results in reproducible scribed lines and transferred dimensions. Conformity with DIN 6486 provides a recognised quality reference for compatibility with other workshop gauges and ensures dimensional expectations are documented for quality processes. Robust design that stands up to the workshop Constructed from hardened steel, the tool resists wear at the contact points and maintains leg geometry under regular use. The straightforward, all-steel build minimises the need for maintenance while offering superior durability compared with plated or softer alloys. The 250 mm leg span offers a practical reach for most fixture and component marking, balancing reach and rigidity in a single, compact tool. Practical handling, versatile applications The geometry and weight distribution of this divider favour single-person operation for routine layout work, scribing circles and stepping off measurements. In toolroom, maintenance and fabrication settings the instrument is particularly useful for transferring radii, establishing centres and marking arcs on sheet, plate or machined components. The simple adjustment and tactile feel of the hinge allow controlled, repeatable settings—ideal when reproducibility is part of the production specification. Choose the Metav IndustryLine pointed divider for robust, repeatable marking and contact Metav Werkzeuge in Emmerich for ordering or technical guidance Technical data Article number: M214.203 GTIN: 4054469107219 ECLASS: 21170305 Facts Length: 250 mm Tariff number: 90172039 Special features Material: steel, hardened Standard: DIN 6486 Hinge: rivet hinge Category: dividers / measuring instruments FAQ Is the hinge adjustable or fixed? The hinge is a rivet hinge designed for secure, repeatable settings; minor retightening is possible if the joint requires adjustment. What materials is the divider suitable for marking? The divider is intended for workshop marking on metals and other machinable materials; its hardened points perform well on sheet, plate and machined surfaces. Does the product meet any recognised standards? Yes, the divider conforms to DIN 6486, indicating adherence to established dimensional and construction expectations. What is the intended primary use for the tool? The primary use is precision layout and transfer work—stepping off distances, scribing arcs and establishing centres in toolroom and fabrication contexts. Can the divider be used for repeated production marking? Its hardened construction and stable hinge make it suitable for repeated layout tasks where reproducibility is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Divider Caliper With Pencil Holder, Hardened Steel, DIN 6486 - Metav IndustryLine
Combining a hardened steel frame with a secure pencil holder and a precise two‑point tip, this 300 mm divider delivers repeatable scribing and long‑term robustness for workshop tasks; order directly via Metav Werkzeuge or consult their specialists for application advice. Divider with pencil holder, 300 mm – two‑point precision compass (Metav IndustryLine) The divider with pencil holder, 300 mm, is a workshop compass designed for accurate scribing and layout work across a wide range of materials Hardened steel construction Integrated pencil holder Two‑point scribing pivot Conforms to DIN 6486 Reliable marking and repeatable scribing for production use The robust construction in hardened steel provides consistent stiffness and wear resistance, so marks and scribed lines remain uniform over time. The fixed two‑point tip offers a stable pivot that minimises lateral play; this stability translates directly into repeatable scribing on sheet metal, wood and composite surfaces. Conformity with DIN 6486 indicates a workshop standard level of geometry and safety that supports predictable results in routine layout operations. Practical handling and secure pencil positioning An integrated pencil holder allows the tool to switch between metal scribing and pencil marking without auxiliary clamps, improving workflow efficiency in layout and template tasks. The rivet‑style hinge offers smooth adjustment while retaining a firm lock on the chosen span, so the instrument holds its setting during transfer from bench to component. The overall balance and ergonomic leg spacing reduce operator fatigue during prolonged use, helping maintain accuracy in repetitive tasks. Applications, maintenance and compatibility with common materials This divider is suited to marking, centre‑finding and transferring dimensions on a broad range of workshop materials thanks to its hardened steel points. Typical uses include workshop layout, pattern work and preparatory marking for drilling or cutting. Routine maintenance is limited to occasional light lubrication of the hinge and careful storage to protect the sharp points; maintained in this way, the instrument keeps its geometry and service life. The compact form also makes it convenient for toolboxes and layout kits. Choose the Metav IndustryLine 300 mm divider with pencil holder for robust, repeatable scribing — contact Metav Werkzeuge in Emmerich for tailored advice and reliable supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical Data Article number: M214.243 GTIN: 4054469107554 Weight: 0.3 kg Measuring range: 300 mm Customs tariff number: 90172039 Facts Material: hardened steel Standard: DIN 6486 Two‑point configuration Integrated pencil holder Special features Metav IndustryLine product family Suitable for layout and marking tasks Compact, workshop‑oriented design Supplied without calibration certificate FAQ What materials can be marked with this divider? The divider with pencil holder, M214.243 (Metav IndustryLine) is suitable for marking and scribing on metals, wood and common workshop composites thanks to its hardened steel points. Does the instrument conform to any standards? Yes, the compass complies with DIN 6486, which describes relevant geometric and safety characteristics for such workshop layout tools. Is the pencil holder compatible with standard pencil leads? The integrated pencil holder accepts common carpentry and drafting pencils; the M214.243 allows quick switching between scribing and pencil marking as required. How is the pivot stability ensured during transfer? A rivet hinge provides smooth adjustment and a firm lock on the set span, so the Metav IndustryLine divider maintains its setting when moved from bench to workpiece. What is the article number for ordering and identification? The product is listed under SKU M214.243 (GTIN 4054469107554) for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm External Divider With Rivet Hinge, Steel, DIN 6484 - Metav IndustryLine
Combining a riveted hinge, a 300 mm measurement span and robust steel construction, this outside caliper delivers repeatable layout and marking results while resisting everyday workshop wear; order the outside caliper directly via Metav Werkzeuge or consult their specialists for application advice. Outside caliper M214.234 — riveted hinge, 300 mm, Metav IndustryLine The Outside caliper M214.234 is a workshop-grade divider designed for precise marking and distance transfer on metal and non-ferrous parts in routine production and maintenance tasks. Riveted hinge for durable joint 300 mm measurement range Solid steel construction Robust build for repeatable layout work The tool is engineered around a riveted hinge that keeps the legs aligned under repeated use, reducing play and maintaining consistent spacing during marking operations. Manufactured from steel, the instrument balances stiffness with manageable weight (approx. 0.3 kg), which helps to steady hand movements while transferring distances. The 300 mm span gives a practical working envelope for most shop tasks, enabling reliable layout across moderate component sizes without needing larger, less manageable instruments. This combination supports efficient workflows, particularly where repeatability across multiple workpieces is essential. Accurate transfer and versatile marking applications Designed as a divider/outside caliper, the instrument is suited to transferring dimensions, scribing circles and setting templates on workpieces. The fixed joint and stout legs enable stable contact points for both concave and convex profiles. Conformance to DIN 6484 provides users with an established baseline for construction and functionality, making the tool suitable for use in metalworking benches, service shops and educational workshops that expect standardised tools. The simple mechanical design means no electronics or calibration dependencies, so the device is ready for immediate use and straightforward to maintain. Practical advantages for everyday workshop use With its uncomplicated geometry and robust materials, this divider supports rapid setup and long service life. The solid construction minimises deformation under normal handling, while the riveted joint reduces the need for re‑adjustment compared with softer connections. Its balanced weight assists in precise placement without excessive operator fatigue during repetitive tasks. Supplied as a single, dependable instrument, the caliper fits neatly into standard tool assortments and complements precision hand tools and layout equipment already in use. Contact Metav Werkzeuge for tailored advice and reliable supply from Emmerich’s central stock. Technical data Article number: M214.234 GTIN: 4054469107479 Category: Zirkel Facts Length: 300 mm Weight: 0.3 kg Customs tariff number: 90172039 Special features Material: steel Joint: riveted hinge Standard: DIN 6484 Label: Außentaster, Nietscharnier, 300 mm 0,22 kg FAQ Is this caliper suitable for scribing circles on metal surfaces? Yes. The Outside caliper M214.234 is designed for distance transfer and scribing circles on metal and non‑ferrous surfaces thanks to its rigid steel legs and riveted hinge. Can this divider be used for precision layout in a production environment? The robust construction and adherence to DIN 6484 make the instrument appropriate for routine production layout tasks where mechanical repeatability is required. How much does the tool weigh and what span does it cover? The divider weighs approximately 0.3 kg and offers a maximum span of 300 mm, providing a practical balance between reach and manoeuvrability. Is the joint adjustable or fixed? The joint is a riveted hinge designed for durability and minimal play; it provides a stable, maintenance‑friendly connection rather than fine adjustment. Which materials is the instrument made from and how should it be cared for? The caliper is made from steel; routine care consists of keeping contact points clean, lightly oiling pivot areas and storing the tool dry to prevent surface corrosion. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300 mm Spring Divider, 0.2 kg - Metav IndustryLine
Take advantage of the combination of a 300 mm measuring span, a spring-loaded tension that ensures uniform marking, and a lightweight 0.2 kg construction for fast, repeatable layout work; order directly via Metav Werkzeuge or consult our advisors for application guidance and delivery. Spring divider M214.247 — 300 mm spring-loaded divider by Metav IndustryLine The spring divider M214.247 is a 300 mm workshop divider designed for precise layout, scribing and transfer measurements across metalworking and general fabrication tasks. 300 mm measuring span Spring-loaded tension for uniform marking Lightweight at 0.2 kg for easy handling Consistent marking that speeds production A spring-actuated divider converts small operator variations into repeatable results: the integrated spring mechanism maintains an even contact force, producing consistent pressure and uniform scribe depth across repeated marks. The generous 300 mm span covers the majority of layout tasks encountered in fabrication and maintenance, reducing tool changes and set-up time. For production environments where traceability and repeatability matter, the controlled marking action translates directly into fewer reworks and a more efficient workflow. Ergonomic handling to reduce operator fatigue The compact, balanced construction keeps the instrument light in hand; at 0.2 kg the tool is easy to manoeuvre for extended tasks without compromising stability. The spring-loaded design removes the need for constant manual readjustment, which not only shortens cycle times but also minimises hand strain during repetitive scribing. The combination of low weight and a steady contact force supports quicker, more accurate transfers of measurements between templates, fixtures and workpieces. Versatile for trade and workshop applications Designed for layout, marking out and transferring measurements, this divider suits sheet metal work, general engineering, joinery layout and maintenance jobs that demand clean, repeatable scribe lines. The straightforward design keeps maintenance minimal while providing the practical reliability required in busy shops. Backed by Metav’s focus on making precision accessible, the instrument pairs simple usability with workshop-grade consistency, supporting both occasional marking tasks and frequent production use. For a practical, dependable layout tool, request the Metav IndustryLine spring divider through Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored advice and prompt supply Technical data Article number: M214.247 GTIN: 4054469183114 Manufacturer: Metav IndustryLine Eclass: 21170305 Key figures Measuring range: 300 mm Weight: 0.2 kg Special features Spring-loaded tension for uniform marking Suitable for layout, scribing and measurement transfer Category: Divider / compass (Zirkel) FAQ What measuring range does this divider cover? The divider provides a measuring span of 300 mm, suitable for most workshop layout and scribing tasks. Is the spring mechanism adjustable or fixed? The spring mechanism on this spring divider maintains a controlled contact force for consistent marking; minor tension adjustment can be made by careful repositioning of the legs. Can this tool be used for metalworking and carpentry? Yes, the spring divider is suited to both metalworking and carpentry for layout and transfer measurements. How heavy is the instrument and does that affect stability? Weighing 0.2 kg, the instrument is lightweight yet balanced to allow stable scribing with minimal operator fatigue. Which SKU should be quoted when ordering? Please quote SKU M214.247 when enquiring about the Metav IndustryLine spring divider. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
3000mm Rod Caliper With Carbide Tips, Fine Adjustment - Metav IndustryLine
Take advantage of the extra‑long 3,000 mm measuring range, robust stainless steel construction and replaceable carbide tips for reliable, repeatable measurement of large components; order the rod caliper directly through Metav Werkzeuge or contact our consultants for application advice. Rod caliper 3000 mm with carbide tips — Metav IndustryLine extra‑long measuring rod with fine adjustment The Rod caliper 3000 mm with carbide tips is an extra‑long measuring instrument designed for large assemblies in heavy machining, pipework and vessel construction, providing long‑range, workshop‑grade measurement capability in a single, robust tool. 3,000 mm measuring range Replaceable carbide tips Fine adjustment for exact setting Stainless steel with vernier scale Reliable long‑range measurement for large components The extra‑long 3,000 mm measuring capacity places this instrument in the extra‑long category for calipers, making it suitable for large shafts, pipes and housing assemblies where a conventional hand caliper is insufficient. The extended span is engineered for reproducibility: the stainless steel profile and matt‑chrome division reduce flex and visual glare, while the robust construction keeps the measuring faces aligned over the entire length. This design reduces rework and speeds up setup when measuring long components on the shop floor. Precision where wear and repeatability matter A mechanical vernier with a reading of 0.05 mm delivers a clear, workshop‑appropriate resolution that balances readability with ruggedness. The instrument includes fine adjustment, allowing controlled closing and repeatable referencing without overshoot — a practical advantage during assembly checks or on‑bench inspections. The replaceable carbide tips resist abrasion in repetitive contact applications and extend the service life compared with softer measuring faces, keeping measurement uncertainty low across many production cycles. Practical handling and workshop integration Weighing in as a solidly built tool for heavy use, the caliper is conceived for two‑person handling and stationary measurement at benches or jigs. The matt‑chrome finish on the scale improves contrast under industrial lighting, while the vernier layout supports fast, unambiguous readings without electronic dependencies. For workshops seeking a durable tool that integrates with existing measuring routines, this solution combines straightforward mechanics with features that cut downtime and maintenance effort. For reliable extra‑long measurement solutions, contact Metav Werkzeuge for expert advice and procurement of the Metav IndustryLine rod caliper with carbide tips — phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: M201.178 GTIN: 4054469100937 eClass: 21170344 Tariff number: 90173000 Facts Measuring range: 0–3000 mm Maximum range: 3000 mm Reading: 0.05 mm Tip length: 105 mm Weight: 20 kg Special features Stainless steel body with vernier and matt‑chrome division Replaceable carbide (HM) measuring tips Fine adjustment for controlled setting Extra‑long classification for large components Category: calipers (Messschieber) FAQ What measurement range does this caliper cover? The rod caliper covers a measuring range of 0–3000 mm, making it suitable for extra‑long components and assemblies. Are the measuring tips durable and replaceable? Yes, the caliper is fitted with replaceable carbide tips, which resist wear and can be changed to maintain long‑term accuracy. What reading resolution is provided by the vernier? The mechanical vernier offers a reading resolution of 0.05 mm, appropriate for robust workshop measurement tasks. Is there a fine adjustment for repeatable settings? The instrument includes a fine adjustment mechanism to enable precise, repeatable positioning during inspection or assembly checks. What material and surface finish does the measuring rod have? The measuring rod is made from stainless steel with a matt‑chrome division and vernier to reduce glare and improve readability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Bow Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
The combination of hardened steel construction, a 300 mm measuring range and a robust rivet hinge makes this tool a dependable choice for repetitive layout and scribing work; it delivers stable pivoting and precise transfer of measurements across larger components. For practical procurement, order the bow divider directly via Metav Werkzeuge or consult the Metav technical team if further details are required. Bow Divider M214.214 — 300 mm, hardened steel, rivet hinge (Metav IndustryLine) Bow Divider M214.214 designed for precise scribing and dimension transfer in workshop and layout tasks, featuring a rivet hinge for secure alignment and conformity with DIN 6486 for consistent geometry. Hardened steel construction, durable 300 mm measuring range for larger layouts Rivet hinge for stable, repeatable settings Conforms to DIN 6486 for tool geometry Precision and durability for repeatable layout work The solid, hardened steel legs provide wear resistance and a consistent pivot action, so marks remain accurate even after extended use. The riveted joint creates a mechanically simple but secure connection that resists play; this yields stable scribing and repeatable settings when transferring dimensions between jigs, templates or workpieces. The tool’s geometry follows recognised standards to minimise user-induced variance and to support reliable results on the shop floor. Practical reach and control for larger components With a 300 mm span the divider covers a practical working range for medium and large layouts where short compasses are insufficient. The longer reach reduces the need for temporary extensions and supports direct transfer of radii and distances across assemblies. The balanced leg length aids manual guidance during marking tasks, improving control and reducing the likelihood of slip marks. This makes the instrument suitable for use in metalworking, fabrication and general workshop layout operations. Standard conformity and workshop readiness Manufactured in accordance with DIN 6486, the instrument benefits from standardised dimensions and tip geometry that integrate smoothly into existing quality processes. The simple, maintenance‑friendly design requires only occasional cleaning and light lubrication to maintain function; no complex adjustments are necessary. The model is part of the Metav IndustryLine, reflecting a practical combination of reliable engineering and accessibility for professional workshops. For robust and consistent layout work, choose the Metav IndustryLine bow divider M214.214 and contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: M214.214 GTIN: 4054469107295 Category: Zirkel (Dividers) Standard: DIN 6486 Tariff number: 90172039 Facts Measuring range: 300 mm ECLASS: 21170305 Special features Material: hardened steel Rivet hinge Bow divider geometry Conforms to DIN 6486 FAQ What is the primary application of this bow divider? The bow divider M214.214 is intended for precise scribing and transferring measurements across workpieces in layout and fabrication tasks, providing a stable option for marking radii and distances. How does the rivet hinge affect performance? A rivet hinge gives the Metav IndustryLine divider a secure pivot with minimal play, ensuring repeatable settings and stable scribing over prolonged use. Is the geometry standard-compliant? Yes, the instrument is made to meet DIN 6486, which standardises divider geometry for compatibility and predictable behaviour in workshop processes. Can the divider be used for heavy-duty marking on metals? The hardened steel legs of the M214.214 are designed for durable use on common workshop materials; regular inspection of the tips and routine maintenance prolong service life. Are spare parts or replacement tips available? Replacement or service information can be provided for the M214.214 through Metav IndustryLine channels; specifications for consumables and repair options are available on request. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Dial Caliper 0.1mm Resolution Hardened Tips, Locking, Matt Chrome Scale - Metav IndustryLine
Take advantage of a 300 mm measuring range, 0.1 mm vernier reading and hardened measuring tips to secure robust, reproducible workshop measurements; order directly via Metav Werkzeuge or contact our consultants for tailored advice. Divider Caliper 300 mm — Analogue Vernier 0.1 mm (Metav IndustryLine) The Divider Caliper 300 mm is an analogue workshop caliper designed for standard-range measurements up to 300 mm, ideal for everyday metalworking and mechanical assembly tasks. 300 mm measuring range 0.1 mm vernier resolution Hardened measuring tips Matt‑chromed scale and vernier Reliable measurement across standard workshop tasks This caliper provides a 300 mm reach in a Standard range format that balances span and stiffness for routine machining and assembly work. The analogue vernier with a 0.1 mm reading offers a straightforward, durable solution where fast visual checks and mechanical robustness matter more than sub‑millimetre laboratory precision. The vernier system allows repeatable readings without batteries, making the tool dependable on the shop floor and in mobile inspection scenarios. Durable build for repetitive use and long service life Constructed from special hardened steel, with the vernier and scale matt‑chromed, the instrument is built to resist wear and maintain legibility over prolonged use. The hardened measuring tips reduce edge wear and preserve measurement reliability when checking hardened parts or finished components. A mechanical locking screw secures the slide during transfer measurements, safeguarding the reading and improving reproducibility in serial inspections. Practical handling and clear scale layout for efficient workflows The classic vernier layout keeps interpretation simple and quick, supporting rapid throughput in production or maintenance workflows. The plain, matt‑chromed scale reduces glare while the robust slider and fixation mechanism facilitate steady contact pressure, which helps avoid inconsistent readings caused by changing grip. For teams seeking reliable, low‑maintenance calipers for general metalwork, this analogue instrument from Metav IndustryLine is a pragmatic choice that emphasises longevity and straightforward operation. Contact Metav Werkzeuge today to secure the Metav IndustryLine divider caliper and benefit from European stock, technical advice and dependable delivery from Emmerich Technical data Article number: M201.172 GTIN: 4054469164281 ECLASS: 21170344 Tariff number: 90173000 Category: Calipers Measurements / Core data Measuring range: 0–300 mm Resolution: 0.1 mm Type: Analogue vernier Materials / Special features Material: Special hardened steel Vernier and scale: Matt‑chromed Measuring tips: Hardened Locking screw: Included Suitable for: Ø600 FAQ What measuring range and accuracy does the caliper offer? The Divider Caliper 300 mm provides a measuring range of 0–300 mm with a vernier resolution of 0.1 mm, suitable for standard workshop tolerances. What material and surface finish are used? The instrument is made from special hardened steel; the vernier and scale are matt‑chromed for improved durability and reduced glare. Are the measuring tips suitable for hardened workpieces? Yes, the caliper features hardened measuring tips that resist wear when measuring tougher or finished surfaces. Does the caliper include a locking feature for stable readings? The Divider Caliper 300 mm is supplied with a locking screw to secure the slide and preserve the measured value during transfer. Is this caliper intended for everyday workshop use or lab inspection? Designed for everyday metalworking and mechanical assembly, the Metav IndustryLine Divider Caliper 300 mm balances robustness and practicality rather than ultra‑fine laboratory precision. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Divider Caliper With Carbide Tips 0.1mm Graduation, Hardened Steel - Metav IndustryLine
Take advantage of the combination of hardened special steel, carbide measuring tips and a 300 mm measuring range with a 0.1 mm vernier for reliable workshop measurement. Order the divider caliper directly via Metav Werkzeuge or ask our consultants if needed. Divider caliper 300 mm with carbide tips (Metav IndustryLine) — Standard precision caliper, 0.1 mm vernier Divider caliper 300 mm with carbide tips (Metav IndustryLine) is a purpose-built measuring instrument for standard workshop and metalworking tasks, designed to deliver robust, repeatable external and step measurements across a 0–300 mm range. Hardened special steel construction Carbide measuring tips for wear resistance Nonius vernier with 0.1 mm resolution Robust design for everyday industrial use Constructed from hardened special steel with a matt chrome-plated vernier and scale, this instrument resists wear and maintains legibility in workshop environments. The solid material choice reduces the risk of deformation during routine handling, which supports consistent measurement results over time. The locking screw provides stable clamping of the slide, preventing slippage during transfer of measurements and enhancing reproducibility for assembly and inspection tasks. Practical vernier system and suitable measuring class The analogue nonius vernier offers a 0.1 mm resolution, which places this caliper in the standard workshop class for machine and metalworking operations. That level of resolution is appropriate for general fabrication, fitting and inspection where robust, quick checks are required. The vernier mechanism is mechanically simple and reliable, avoiding battery dependence while still enabling fast readings; a brief familiarisation with vernier reading ensures accurate interpretation on the shop floor. Durable contact points for repeatable measurements Equipped with carbide measuring tips, the instrument delivers exceptional resistance to abrasion when contacting harder surfaces or frequently measured parts. This durability keeps the contact geometry stable and reduces the need for frequent replacement, which in turn supports long-term measurement consistency. The design is particularly beneficial where pointed contacts improve access to grooves, small diameters or step edges, turning a durable caliper into a dependable tool for everyday inspection duties. For reliable workshop measurement of components up to 300 mm choose the Metav IndustryLine divider caliper and contact Metav Werkzeuge for purchasing and technical advice via info@metav-werkzeuge.com or telephone +49 2822 7131930 Technical data SKU: M201.172.H GTIN: 4061905047756 Eclass: 21170344 Facts Measuring range: 0–300 mm Resolution (vernier): 0.1 mm Tariff number: 90173000 Special features Material: hardened special steel Surface: matt chrome-plated vernier and scale Measuring tips: carbide Scale type: analogue nonius (vernier) Locking screw for slide fixation Category: standard caliper (0–300 mm) FAQ What measuring range does this caliper cover? The divider caliper covers a measuring range of 0–300 mm, making it a standard workshop instrument suitable for general metalworking and assembly checks. How precise is the instrument and what does 0.1 mm mean in practice? The analogue nonius vernier provides a resolution of 0.1 mm, which is suited to routine fabrication tolerances and quick shop-floor inspections where robustness and speed are priorities. Are the measuring tips suitable for hard or abrasive parts? Yes, the carbide measuring tips are designed for wear resistance and maintain contact geometry when measuring harder surfaces, ensuring repeatable readings during frequent use. Is the caliper delivered calibrated? No specific calibration certificate is listed for this item; the instrument is supplied as a mechanical vernier caliper. If an accredited calibration is required, please enquire separately about available calibration services. What advantages does the Metav IndustryLine version offer? The Metav IndustryLine version combines robust materials, a matt chrome finish for reduced glare and readable scales, and durable carbide tips to support dependable measurements in everyday industrial environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Hardened Steel Divider With Carbide Tips, Nickel Hinge, DIN 6486 - Metav IndustryLine
Combining carbide tips, a hardened steel body and a secure rivet hinge delivers durable, reproducible marking across engineering and metalworking tasks; the 300 mm span covers larger layouts without sacrificing stiffness. Order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Carbide‑tipped Point Divider M214.204.H — 300 mm hardened steel The Carbide‑tipped Point Divider is a robust marking and scribing instrument designed for metalworking and engineering workshops, offering long service life and stable adjustment for layout and transfer work. Carbide tips for long service life Hardened steel body for torsion resistance 300 mm span for larger layouts Rivet hinge for vibration‑resistant adjustment Robust construction for repeatable layout work Designed to withstand everyday workshop use, this divider combines a hardened steel frame with carbide tips to resist wear during repeated scribing on tougher materials. The 300 mm leg span provides an extended working range while maintaining profile stiffness, so markings remain consistent over longer runs. Conformance with DIN 6486 underlines the manufacturing tolerances applied to critical dimensions, supporting reproducible results in assembly and fabrication tasks. Stable setting and precise transfer The rivet hinge offers a low‑play pivot that keeps the legs aligned under light lateral pressure, enabling exact transfer of measurements and clear scribe lines. Compared with loose joint designs, the riveted connection reduces micro‑movement during marking, which improves repeatability for layout operations. Fine adjustments can be performed smoothly, making the tool suitable for pattern transfer, centre‑marking and stepping out distances on plate and fabricated parts. Practical handling and workshop longevity At 0.29 kg the instrument feels balanced in hand: heavy enough to stay steady during use but light enough for prolonged tasks. The carbide tips extend service intervals and lower lifecycle costs by resisting blunting on abrasive surfaces. Routine care is straightforward — a quick wipe to remove swarf and occasional lubrication at the hinge preserves performance. For professional workshops seeking a reliable, low‑maintenance scribing tool, this design offers tangible reductions in rework and marking errors. For ordering, availability or specification guidance on the Metav IndustryLine carbide‑tipped divider, contact Metav Werkzeuge GmbH directly via info@metav-werkzeuge.com or +49 2822 7131930 — Metav’s specialists will advise on fit for purpose and delivery. Technical data Article number: M214.204.H GTIN: 4054469159263 Category: Dividers Manufacturer: Metav IndustryLine Tariff code: 90172039 Facts Length: 300 mm Weight: 0.29 kg Material: Hardened steel Special features Carbide tips Rivet hinge Conforms to DIN 6486 Robust workshop design FAQ What materials is this divider intended for? The Metav IndustryLine carbide‑tipped point divider is engineered for marking and scribing in metalworking environments and performs well on ferrous and non‑ferrous sheet and plate where a durable tip is required. Can the carbide tips be re‑sharpened or replaced? Carbide tips deliver extended wear life; routine sharpening or professional replacement maintains the original scribing performance for the divider. How does the rivet hinge affect accuracy? The rivet hinge on this divider reduces play at the pivot, improving alignment stability and thus enhancing repeatability of transferred measurements and scribe lines. Is the tool suitable for pattern layout over longer distances? With a 300 mm span and a stiff, hardened frame, the divider covers larger layout tasks while keeping deflection low for consistent marking. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Internal Dial Point With Rivet Hinge, Steel, DIN 6482 - Metav IndustryLine
Take advantage of the combination of robust steel construction, a 300 mm reach and the secure rivet hinge for reliable internal measurements in the workshop; order the M214.224 directly via Metav Werkzeuge or ask our consultants for application advice. M214.224 Inside Caliper — 300 mm, rivet hinge, steel A M214.224 inside caliper designed for precise internal measurements of bores, recesses and internal distances in general workshop and metalworking applications 300 mm measuring reach Robust steel construction Rivet hinge for stable joint Conforms to DIN 6482 Repeatable internal measurements for production use The M214.224 is built to deliver repeatable inside measurements thanks to its straightforward geometry and a firm rivet hinge that minimises play. The compact, unembellished design keeps the measurement action direct: once set, the legs maintain alignment and permit fast comparison checks on multiple workpieces. Conformity with DIN 6482 signals compliance with an established industry standard for this class of divider, which supports consistent measurement routines on the shop floor and reduces rework by improving first-pass accuracy. Practical length and handling suited to everyday workshop tasks With a 300 mm span the instrument sits squarely in the standard size range for workshop dividers, offering a practical balance between reach and handling. The moderate mass (approximately 0.2 kg) makes the tool easy to position for one‑handed work while retaining enough inertia to keep the legs stable during transfer between parts. This combination shortens inspection cycles: set the caliper, transfer the setting, and carry out comparative checks without frequent readjustment — an efficiency gain for repetitive measuring tasks. Robust materials and low-maintenance mechanics for long service life Manufactured from steel, the construction focuses on durability and simple upkeep. The rivet joint is serviceable and avoids complex mechanisms that require frequent attention; routine cleaning and occasional lubrication of the hinge are sufficient to preserve smooth action. The straightforward build supports long-term use in industrial environments where tools must withstand daily handling and maintain reliable performance over time. Contact Metav Werkzeuge for detailed application guidance or to request a tailored quotation for the M214.224 inside caliper and complementary workshop measuring tools Technical data Article number: M214.224 SKU: M214.224 GTIN: 4054469107387 Manufacturer: Metav IndustryLine Facts Length: 300 mm Weight: 0.2 kg Standard: DIN 6482 Special features Material: Steel Rivet hinge connection Category: Divider / inside caliper ECLASS: 21170336 FAQ What is the measuring range of this caliper? The span is 300 mm; the design is intended for internal measurements such as bores and recesses. Is the hinge adjustable or fixed? The tool uses a rivet hinge that provides a stable joint with low play for repeatable measurements. Does this caliper comply with any standards? Yes, the instrument conforms to DIN 6482, ensuring it meets established dimensional and functional expectations. What is the weight and material of the instrument? The divider is made from steel and weighs approximately 0.2 kg, offering a balance of robustness and manageable handling. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pinpoint layout and repeatable radii for workshop precision
The category covers dividers for industrial scribing and measurement transfer, including bow compasses, point dividers and scribing compasses designed for heavy-duty workshop use. These tools serve the essential task of transferring centres, radii and distances reliably onto metal and other workpiece surfaces.
How dividers and related tools work in production
Used alongside granite surface plates and height gauges, dividers enable exact layout of bores, edges and machining references before cutting or drilling. In practice, parallel scribing gauges and ergonomic scribing needles with carbide tips create fine, durable lines on hardened steel without weakening the material. For vertical measurements, height gauges — from mechanical models with vernier or double-counter readouts to digital height gauges with high resolution, data interfaces and quick tolerance checks — ensure height transfer that integrates with traceable measuring workflows. Measuring dividers with hardened points and robust joints keep set dimensions stable, even under repeated use, while quick-clamp fine adjustments permit rapid re‑setting during batch production.
Tangible benefits that improve throughput and quality
- Increased first-pass yield through accurate transfer of bore centres and edges.
- Reduced setup time via stable fixation and quick-clamp fine adjustments.
- Longer service life thanks to components in hardened tool steel, stainless alloys and carbide tips.
- Seamless integration into inspection routines using digital height gauges with data-export capabilities.
- Consistent repeatability when scribing radii and distances with engineered joint stability.
Metav as your precision partner for everyday workshop needs
Metav combines decades of measurement expertise with a broad selection of workshop-grade layout tools, making high accuracy accessible for industry and trade. With over 48,000 customers and a central quality hub in Emmerich, Metav provides a dependable supply of dividers, scribing compasses and measuring dividers that reduce supplier complexity and support continuous production.
Key takeaway
For reliable pre‑machining layout, dividers and associated scribing and height-measuring tools ensure exact geometry transfer, minimising waste and streamlining shopfloor processes.
FAQ
What types of dividers are best for heavy-duty steel layout?
For heavy-duty steel layout, choose measuring dividers or point dividers with hardened points and robust joints; these designs keep measurements fixed under repeated use and produce clear scribe lines on hardened surfaces.
Can digital height gauges be integrated into quality documentation?
Yes. Digital height gauges in this range offer high resolution and data interfaces that allow direct transfer of measured values for tolerance checks and traceable quality records.
How do scribing compasses differ from standard compasses?
Scribing compasses are built for industrial use: they feature hardened tips, stable joints and fine-adjust mechanisms, unlike lightweight drawing compasses intended for paper or light materials.
Are there solutions for quick re‑setting during batch work?
Measuring dividers with quick-clamp fine adjustments enable fast, repeatable re‑setting, reducing downtime between consecutive parts without sacrificing precision.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com