Precision marking and layout compasses to ensure exact transfers
Precision marking compasses and layout compasses are indispensable for transferring radii and distances with pinpoint accuracy in metalworking and toolmaking, offering reliable layout for subsequent machining operations. These compasses, spanners and scribing dividers excel at marking centre points and contour lines on hardened steel and other workshop materials, reducing scrap and ensuring consistent part fit. Made from hardened tool steel and fitted with wear-resistant tips, they provide durable, repeatable performance for layout, inspection and jig preparation. Integrating these tools into your workflow improves dimensional control, speeds up set-up and supports quality assurance across production environments.
300mm Internal Spring Dividers Hardened Steel, DIN 6487 - Metav IndustryLine
Take advantage of the robust combination of hardened steel construction, standard conformity and practical length for reliable internal measurements; the spring-loaded mechanism ensures consistent contact pressure and reproducible results. Order the instrument directly via Metav Werkzeuge or consult our specialists for application advice. Spring-loaded internal caliper, 300 mm, 0.29 kg — Metav IndustryLine spring internal caliper, hardened steel, DIN 6487 Spring-loaded internal caliper, 300 mm, 0.29 kg is a specialist measuring divider intended for internal measurements in metalworking and general workshop metrology, designed to combine repeatable contact force with a compact, easy-to-handle form factor Spring-loaded contact for consistent pressure Hardened steel construction for long service life Conforms to DIN 6487 for standardised geometry Lightweight 0.29 kg for easy handling Repeatable internal measurements with controlled contact force The spring mechanism of this instrument provides a consistent contact pressure, which reduces operator-induced variation during repeated internal dimension checks. Built to workshop tolerances, the tool supports routine quality control tasks where a steady measuring action matters more than sub-micron resolution. The combination of controlled force and simple geometry makes it especially suitable for checking bores, slots and internal diameters where reproducible seating of the legs is required. Durable construction to withstand daily workshop use Manufactured from hardened steel, the caliper delivers robust wear resistance and maintains edge geometry under frequent use. The hardened material keeps the legs stable and helps preserve measurement geometry over time, which reduces maintenance intervals and replacement costs. Its modest mass of 0.29 kg keeps handling comfortable during repetitive operations, while the total length of 300 mm offers reach for medium-sized internal components without compromising stiffness. Conformity with DIN 6487 for predictable results Compliance with DIN 6487 ensures that the instrument's geometry and tolerances align with established standards, giving procurement and inspection teams a clear technical basis for integration into existing quality processes. Standardised form and dimensions simplify documentation and comparison with inspection plans, supporting traceability and easing adoption in environments that require consistent measuring practices. Practical handling and workshop integration The tool’s balance of reach and rigidity makes it a practical choice for assembly jigs, maintenance benches and prototyping setups. The spring-loaded action shortens measuring cycles by stabilising the position of the legs once engaged, which speeds inspections and reduces hand fatigue. For teams seeking a dependable, low-complexity internal measuring instrument, this design offers a cost-effective complement to higher-resolution laboratory equipment. For reliable internal measurements choose the Metav IndustryLine spring-loaded internal caliper and contact Metav Werkzeuge in Emmerich for tailored product advice and fast supply options. Technical Data Article number: M214.814 GTIN: 4054469183145 Label: Feder-Innentaster, 300mm 0,29 kg Numbers / Core technical data Total length: 300 mm Weight: 0.3 kg Material hardness: hardened steel Standard: DIN 6487 Special features / Design Spring-loaded internal measuring legs Category: compass / divider for internal measurement Compact, workshop-oriented geometry Manufacturer: Metav IndustryLine FAQ What is the usable length of the instrument? The usable total length is 300 mm as stated for the spring-loaded internal caliper (Metav IndustryLine, SKU M214.814). Which material is used for the legs? The legs are made from hardened steel, offering wear resistance suitable for regular workshop use. Is the geometry standardised? Yes, the instrument conforms to DIN 6487, which standardises form and dimensions for this type of divider. What types of internal measurements is it best suited for? The spring-loaded divider is aimed at bores, slot widths and internal distances in medium-sized components where reproducible seating is required. How heavy is the instrument and how does that affect handling? At approximately 0.29–0.3 kg the tool is lightweight enough for repetitive checks while retaining sufficient stiffness for stable measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Point Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of a precision instrument that combines robust construction, repeatable accuracy and workshop-ready handling for dependable layout and scribing work. Order the divider directly via Metav Werkzeuge or consult our technical advisors for application-specific guidance. Pointed divider M214.204 — 300 mm, hardened steel, riveted hinge (Metav IndustryLine) Pointed divider M214.204 is a purpose-built layout instrument for marking, scribing and transferring dimensions across medium-format components in metalworking and general workshop use Pointed divider for precise scribing 300 mm range for larger components Hardened steel for long service life Riveted hinge ensures stable alignment Accuracy where it matters The Pointed divider M214.204 delivers consistent layout performance thanks to a simple yet effective geometry that holds settings under light handling. The calibrated leg separation and pointed tips provide a defined contact that reduces slippage when scoring materials. For workshop applications where traceable repeatability speeds up set-up and reduces rework, this instrument translates basic dimensional data into reliable marks, supporting efficient downstream operations and less material waste. Built to endure everyday workshop use Constructed from hardened steel, the instrument resists wear at contact points and keeps a straight shank profile for stable measurements over time. The riveted hinge offers a compromise between adjustability and rigidity: the joint resists loosening under normal use while still allowing deliberate repositioning. At approximately 0.3 kg and with a 300 mm leg span, the tool balances stiffness and manoeuvrability so that it remains steady on the bench yet manageable for one-person tasks. Practical handling for repeatable results Ergonomic proportions and a clean cross-section mean that setting and transferring dimensions becomes routine rather than fiddly. The sharp points are suitable for marking steel, aluminium and other workshop materials without excessive pressure; this helps preserve surface finish and avoids oversized marks. The instrument’s simple mechanical design minimises sources of error: fewer moving parts mean fewer variables to control, which directly supports consistent outcomes in batch work and single-piece production alike. Built to recognised standards and everyday applications Compliant with DIN 6486, the instrument meets established expectations for form and function in layout tools, making it suitable for metalworking, model making and fabrication shops alike. The compact weight and clear leg length make it a practical choice for layout on plates, housings and fixtures where a 300 mm span is required. Supplied under the Metav IndustryLine range, the divider fits into a broader toolkit that emphasises reproducibility and workshop efficiency. For precise scribing and reliable layout tasks, contact Metav Werkzeuge to secure the Metav IndustryLine pointed divider M214.204 or request tailored advice from our consultants. Technical data Article number: M214.204 GTIN: 4054469107226 Tariff number: 90172039 eClass: 21170305 Numbers / Core technical data Leg span: 300 mm Weight: 0.3 kg Standard: DIN 6486 Special features / Version details Material: hardened steel Joint: riveted hinge Type: pointed divider (layout and scribing instrument) FAQ What materials can be marked with this divider? The divider is designed for workshop marking on metals such as steel and aluminium; the hardened steel points also perform well on softer materials without excessive deformation. Is the joint adjustable and stable for repeated use? Yes, the riveted hinge provides a stable joint that resists loosening during normal operation while allowing deliberate adjustment when required. Does the instrument conform to any standard? The tool is produced to match DIN 6486, ensuring recognised dimensional and form characteristics for layout instruments. What is the effective working length of the divider? The leg span is 300 mm, suitable for medium-format components, fixtures and plates typically encountered in metalworking and fabrication shops. Can this divider be used for precision bench work or only for rough layout? Its hardened construction and pointed tips make it suitable for accurate layout and scribing tasks; for micrometre-level inspection other specialised metrology tools should be used. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Rod Caliper With Carbide Tips, Fine Adjustment, Stainless Steel Matt Chrome Nonius - Metav IndustryLine
Benefit from a workshop-ready measuring instrument that combines a stainless steel construction, a precise vernier readout and wear-resistant carbide tips for dependable layout and inspection work; order directly via Metav Werkzeuge or consult the specialists for integration into existing measurement routines. Rod-style vernier caliper 300 mm with carbide tips — analogue measuring instrument by Metav IndustryLine A rod-style vernier caliper 300 mm with carbide tips designed for workshop layout, marking and dimensional checks, offering robust construction and fine mechanical control for routine metrology tasks 300 mm measurement range with vernier accuracy Replaceable tungsten carbide contact tips Stainless-steel body with matt chrome finish Fine-adjustment screw for controlled measuring Precise analogue measurement for everyday workshop control The instrument employs an analogue vernier system with a readable step of 0.05 mm, delivering a practical accuracy level for standard machine‑shop inspections and layout tasks. The vernier principle provides a direct, mechanical readout that remains reliable without batteries; this makes the caliper a low‑maintenance choice for repeated use on the shop floor. The 0–300 mm span places it in the Standard class, which is recognised for the best balance of reach, stiffness and one‑hand operability in machining and general metalworking. Durable contact points and stable, corrosion‑resistant body Constructed from stainless steel with a matt chrome‑plated scale, the instrument resists corrosion and surface wear that can affect repeatability. The hardened carbide tips provide a wear‑resistant measuring point that holds up under frequent contact with metal components, prolonging life and reducing the need for frequent replacement. A built‑in fine‑adjustment screw allows controlled jaw travel, improving repeatability when setting the jaws against edges or features and reducing operator‑induced variance during critical layout work. Practical handling, balance and workshop integration At 300 mm measuring length the caliper offers the universal workshop reach for components, fixtures and assemblies without sacrificing stiffness; this is especially useful for toolroom and maintenance applications where both reach and reliable readings matter. The instrument’s mass and profile deliver tactile stability when taking measurements, while the vernier division is matt chrome‑finished to reduce reflections and aid visibility under workshop lighting. The mechanical design favours long service life and straightforward in‑house handling. Ready for routine use and traceable procurement As a Metav IndustryLine instrument, the caliper is engineered for consistent performance in industrial environments and for straightforward procurement into central workshop stocks. The combination of a robust measuring beam, clear mechanical scale and wear‑resistant contact points supports dependable measurement results in everyday quality control. Integration into workshop tool inventories is uncomplicated, and the model is identified for ordering and stockkeeping by its SKU. Contact Metav Werkzeuge for tailored advice on the Metav IndustryLine rod‑style vernier caliper and to arrange direct delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M201.173 GTIN: 4054469100869 Measuring range: 0–300 mm Weight: 1.95 kg Analogue vernier display (nonius): 0.05 mm readable step Facts Standard workshop class (100–300 mm) Resolution / readable step: 0.05 mm Zolltarifnummer: 90173000 Special features Carbide contact tips Fine‑adjustment screw Stainless‑steel body Matt chrome‑plated scale Analogue vernier principle FAQ How accurate is the reading on this caliper? The caliper provides an analogue vernier readout with a readable step of 0.05 mm, suitable for standard workshop inspection and layout work with reproducible results. Is the caliper robust enough for daily shop use? Yes; the stainless‑steel construction and matt chrome scale reduce wear and corrosion, while the carbide contact tips increase resistance to abrasion in frequent measuring tasks. What benefit does the fine‑adjustment screw bring? The fine‑adjustment screw enables controlled jaw movement for precise contact and repeatable positioning, improving consistency when taking series of measurements. Which workshop tasks is this model intended for? Designed for general machine‑shop and metalworking applications, the 300 mm range covers common components, fixtures and assemblies where a balance of reach and stiffness is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
300mm Spring External Caliper, Hardened Steel, DIN 6487 - Metav IndustryLine
Take advantage of a compact, robust measuring tool that combines hardened steel construction, a clear 300 mm reach and shop-floor durability for consistent layout and marking; order the spring external divider directly via Metav Werkzeuge or consult our specialists for application advice. Spring external divider, 300 mm — spring-loaded external caliper by Metav IndustryLine Spring external divider, 300 mm is a spring-loaded external caliper designed for precise layout and marking tasks across metalworking and general workshop applications, offering a reliable balance of reach and stiffness. Hardened steel construction 300 mm measuring range Complies with DIN 6487 Persistent, shop-ready durability for routine layout work The spring external divider is manufactured from hardened steel, giving the instrument a wear-resistant surface and stable geometry that reduces the need for frequent rework. The hardened material resists deformation during repeated scribing and layout tasks, so marks remain consistent over time. The tool’s compact mass of 0.3 kg provides a tactile balance that aids one-handed handling while keeping the centre of gravity close to the workpiece, which benefits repeatability when transferring dimensions. Practical reach and stiffness for everyday workshop dimensions With a total length of 300 mm, this divider fits the standard measuring range widely used in machine shops and metalworking. That range is intentionally chosen to combine reach with sufficient rigidity, which helps avoid flex and measurement drift on medium-sized components such as housings, flanges and fixture parts. The spring mechanism keeps the jaws engaged with controlled force for secure positioning, supporting steady marking even on tougher materials. Compliance with DIN 6487 confirms the product’s suitability for consistent layout procedures under recognised workshop standards. Clear advantages for production and maintenance environments Designed for repeatable performance, the spring-loaded action simplifies frequent set-ups and reduces hand fatigue during extended use. The straightforward mechanical design requires minimal maintenance and is tolerant of rough handling typical at the shop bench. As a result, the instrument lends itself to applications where speed and reliability are essential: preparing parts for machining, transferring bolt-hole spacing or checking spacing during assembly. The combination of simple mechanics and robust material selection supports long service life and low total cost of ownership. Contact Metav Werkzeuge for tailored supply of Metav IndustryLine spring external dividers and expert advice on matching the tool to specific shop-floor tasks; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M214.804 GTIN: 4054469183107 Brand: Metav IndustryLine Facts Total length: 300 mm Weight: 0.3 kg Special features Material: hardened steel Standard: DIN 6487 Tool type: spring external divider FAQ What is the primary purpose of this tool? The spring external divider is intended for precise layout and external scribing tasks on medium-sized components and fixtures; it serves as a durable shop-floor marking instrument. Is this instrument suitable for use on steel and other hard materials? Yes, the hardened steel construction gives the Metav IndustryLine spring external divider the robustness required for marking and layout on steel and comparable materials. Does the tool meet any recognised standard? The divider conforms to DIN 6487, ensuring compatibility with established workshop procedures and quality expectations. How is the handling influenced by the tool’s weight and spring action? At approximately 0.3 kg, the tool offers a balanced feel; the spring-loaded mechanism maintains jaw engagement and aids repeatable positioning during frequent marking operations. Which measuring-class does the 300 mm length represent? A 300 mm total length places this instrument in the standard measuring range, offering a pragmatic compromise between reach and stiffness for everyday machine-shop use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400 mm Internal Depth Gauge With Riveted Hinge, Steel, DIN 6482 - Metav IndustryLine
Take advantage of a robust steel construction, a riveted hinge for lasting stability and a 400 mm reach for large marking tasks; order the tool directly via Metav Werkzeuge or consult our specialists for application advice. Internal divider, riveted hinge — 400 mm (M214.225) by Metav IndustryLine Internal divider M214.225 for precise internal scribing and marking in workshop and inspection work Riveted hinge for durable stability 400 mm length for large components Solid steel construction for longevity Conforms to DIN 6482 for interchangeability Consistent geometry for repeatable marking The tool has been designed to keep the leg alignment stable during repeated use, making repeatable scribing feasible across batches. A riveted hinge provides a fixed pivot that resists loosening, while the steel legs maintain profile under mechanical stress. For workshop processes that demand predictable results, this geometry reduces set-up time and rejects caused by inconsistent layout. Efficient handling for production workflows With a 400 mm span the instrument covers larger diameters and flats commonly encountered in fabrication and jig assembly. The moderate weight and balanced feel enable steady handling during extended tasks, so layout and transfer work runs faster and with fewer interruptions. Built-in compliance with DIN 6482 ensures the divider fits established workshop routines and indexing fixtures without custom adaptation. Low-maintenance robustness and simple care The straightforward construction prioritises serviceability: solid legs and a riveted pivot mean fewer wear parts and less downtime for repair. Occasional cleaning and a drop of light oil on the hinge are sufficient to preserve performance. The result is a tool that supports continuity on the shop floor and reduces total cost of ownership through fewer replacements and interventions. Practical suitability and trustworthy supply This measuring divider is a practical choice for toolrooms, maintenance shops and assembly lines that need a durable, standards-compliant scribing instrument. Supplied under the Metav IndustryLine, it benefits from a European quality filter and dependable logistics that keep workshop inventories replenished. The combination of robustness and conformity makes it suitable as a daily workshop standard for marking and layout work. For procurement or technical advice on the internal divider, contact Metav Werkzeuge’s specialists in Emmerich to discuss suitability for specific applications and to arrange supply Technical data Article number: M214.225 GTIN: 4054469107394 eClass: 21170336 ETIM: EC000029 Category: Zirkel Material: Steel Standard: DIN 6482 Tariff number: 90172039 Label: Innentaster, Nietscharnier, 400 mm 0,29 kg Facts Length: 400 mm Weight: 0.3 kg SKU: M214.225 Special features Riveted hinge (nietscharnier) Solid steel legs Workshop and inspection use Conforms to DIN 6482 FAQ What tasks is this divider best suited for? The internal divider M214.225 is designed for internal scribing and layout of large components, making it suitable for fabrication, jig set-up and quality-inspection marking tasks. Is the hinge adjustable or fixed? The tool uses a riveted hinge that provides a fixed, stable pivot; this fixed joint enhances repeatability compared with freely adjustable knuckle joints. What standard does the divider meet? This instrument conforms to DIN 6482, ensuring dimensional compatibility with fixtures and standard workshop practices. What material is the divider made from? The divider is constructed from steel, chosen for rigidity and wear resistance suitable for daily workshop use. How heavy is the tool and how does that affect handling? With a weight of approximately 0.3 kg and a 400 mm span, the divider balances reach with manageable handling for layout tasks on larger parts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Bow Divider With Pencil Holder, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of a robust, workshop-ready layout tool that combines stable adjustment, hardened-steel durability and a convenient pencil holder for immediate marking; order directly via Metav Werkzeuge or contact our consultants for specification advice. Bow-point compass M214.244 — rivet hinge, pencil holder, hardened steel A bow-point compass designed for durable layout and marking tasks across metal and wood workshops, featuring a rivet hinge and an integrated pencil holder for quick sketching and repetitive marking. Rivet hinge for stable adjustment Integrated pencil holder for direct marking Hardened steel construction for longevity Complies with DIN 6486 Precise, dependable marking for everyday workshop use The instrument delivers a consistent marking experience thanks to its sturdy rivet hinge, which maintains the set radius under light working loads. Constructed from hardened steel, the divider resists wear at the contact points and preserves geometry over prolonged use, reducing the need for frequent readjustment. Conformity with DIN 6486 provides an industry-recognised basis for expected tolerances and manufacturing quality, helping workshop planners to rely on repeatable results during layout, scribing and pattern transfer tasks. This balance of stability and material specification supports efficient production flows in small-batch and series environments. Practical features that speed up layout and pattern transfer An incorporated pencil holder simplifies the switch between scribing and marking, eliminating the need to pick up separate implements for routine tasks. The design allows secure fastening of a common carpenter’s pencil or a mechanical lead, so transfer lines stay visible on a variety of surfaces. Fine adjustment is achieved through the rivet-mounted joint, enabling controlled enlargement or reduction of the radius with minimal play. These functional aspects translate into fewer interruptions on the shop floor and faster progression from measuring to machining or assembly. Built to last with low upkeep for reliable workshop availability The choice of hardened steel for primary components reduces abrasive wear and extends service life, which lowers total cost of ownership through fewer replacements and less downtime. The simple mechanical design is readily maintained: periodic cleaning of pivot points and a light application of machine oil are sufficient to retain smooth operation. The compass is suitable for layout work on common workshop materials and, given its robust build, integrates well into tool sets for both metalworking and joinery. The tool’s straightforward construction supports practical handling and predictable performance across routine marking tasks. For reliable layout and marking backed by Metav IndustryLine quality, request the M214.244 from Metav Werkzeuge — contact our Emmerich team for technical advice, availability or to discuss suitable quantities for the workshop. Technical data Article number: M214.244 GTIN: 4054469107301 Tariff number: 90172039 Standard: DIN 6486 Dimensions / core data Length: 400 mm Weight: 0.5 kg Special features Material: hardened steel Rivet hinge for stable adjustment Integrated pencil holder Category: Bow-point compass / divider FAQ What materials is this compass suitable for? The M214.244 bow-point compass is intended for general workshop layout on materials such as steel and wood; the hardened-steel construction supports repeated use on common surfaces. Does the compass comply with any standards? Yes, the instrument is manufactured to DIN 6486, which defines quality and dimensional expectations for this class of layout tools. Can a standard carpenter’s pencil be used in the holder? The integrated pencil holder accepts common workshop pencils and suitable mechanical leads, enabling immediate marking without extra accessories. How is the adjustment stability achieved? Adjustment stability is provided by the rivet hinge that keeps the set radius firmly in place during typical marking and scribing operations. What is the article number and where can it be sourced? The article number is M214.244 and the compass is available through Metav IndustryLine channels and Metav Werkzeuge’s distribution in Emmerich. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Bow Divider With Riveted Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of a durable, hardened-steel construction and a rivet hinge that locks settings for repeatable scribing and layout; the 400 mm span covers large workpieces while the DIN 6486 alignment ensures consistent geometry — order directly via Metav Werkzeuge or consult our specialists for detailed advice. Bow point divider M214.215 — 400 mm span, rivet hinge, hardened steel (Metav IndustryLine) the Bow point divider M214.215 is a precision marking instrument for layout and scribing tasks in metalworking and general workshop use, designed to transfer and divide dimensions reliably over a 400 mm span Hardened steel construction for long life Rivet hinge for stable, repeatable settings 400 mm span for large components Precise layout with standards-based geometry The instrument offers a stable geometry compliant with DIN 6486, providing consistent marking behaviour across frequent use. The robust hinge mechanism keeps the legs aligned, so measurements and scribed circles remain true even during repetitive layout work. Where exactness matters in metal fabrication or pattern making, the hardened steel legs resist wear and preserve the tip-to-tip distance, supporting reproducible results on sheet, plate and component edges. Built for daily workshop use and repeatability Constructed from hardened steel and weighing approximately 0.5 kg, the device balances solidity with manageable handling. The rivet hinge secures the chosen setting and reduces play, which lowers the risk of accidental drift during marking. This combination of material and hinge design reduces maintenance and extends service life, making the tool suitable for production-side layout tasks as well as precision bench work. Wide span and practical applicability With a maximum span of 400 mm, the divider addresses larger layout tasks such as marking bolt circles, transferring templates or scribing arcs on housings and flanges. The pointed tips facilitate accurate contact points on diverse surfaces while the overall geometry simplifies repetitive divisions and radial layouts. The model is listed under SKU M214.215 and is intended for workshops that require a dependable, heavy‑duty divider for everyday marking duties. Order the Metav IndustryLine M214.215 bow point divider from Metav Werkzeuge in Emmerich for dependable layout accuracy, or contact our technical advisors at info@metav-werkzeuge.com / +49 2822 7131930 for specification guidance Technical data Article number: M214.215 GTIN: 4061905047763 Manufacturer: Metav IndustryLine Standard: DIN 6486 Eclass: 21170305 Tariff number: 90172039 Facts Length / span: 400 mm Weight: 0.5 kg Special features Material: hardened steel Rivet hinge for secure settings Category: divider / compass Suitable for layout and scribing on metal and general workshop materials FAQ What span does the divider cover? The instrument offers a maximum span of 400 mm, suitable for larger layout tasks and marking on sizeable components. Is the hinge adjustable or fixed? The rivet hinge provides a secure, low‑play joint that locks settings for repeatable scribing; it is designed for stability rather than rapid micro‑adjustment. Which materials is the tool intended for? The divider is made of hardened steel and is intended for marking and scribing on metals and general workshop materials where durable tips are required. Does this model comply with any standards? Yes, the geometry is aligned with DIN 6486 to ensure consistent marking behaviour and repeatability. What is the SKU for ordering and reference? The product is listed as SKU M214.215 for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Centre Compass With Carbide Tips, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the hardened steel construction, carbide points and a secure rivet hinge for reproducible marking and long service life — order the tool directly via Metav Werkzeuge or consult our advisors for application-specific guidance. M214.205.H Carbide‑point divider, 400 mm — hardened steel, rivet hinge | Metav IndustryLine M214.205.H is a precision marking divider designed for transferring measurements and scribing arcs in metalworking and general workshop applications. Carbide points for long service life Rivet hinge for stable, repeatable adjustment Hardened steel body for high rigidity 400 mm span for broad marking range Precise, durable marking for repeatable workflows The divider combines a hardened steel shaft with carbide points, delivering a tool that resists wear while maintaining sharp contact with workpieces. The rivet hinge provides a stable pivot that minimises play over repeated adjustments, which translates into repeatable marking and reduced rework. For layout tasks where conformity and traceability matter, this construction reduces measurement drift and keeps setup times short, supporting efficient production cycles. Confident handling and ergonomic control At 400 mm span the instrument balances reach and manoeuvrability: enough extension for larger components while remaining light at 0.44 kg for single‑handed positioning. The geometry of the legs is optimised for rigidity, so transfer lines stay true even when scribing around contours. The carbide tips ensure crisp marking on hardened or coated surfaces, offering a reliable alternative to soft‑point scribes where longevity and consistent line width are required. Built to industry standards and workshop realities Manufactured in accordance with DIN 6486, the divider is suitable for daily use in metal fabrication, prototyping and toolroom tasks. The robust materials and finish mean the instrument withstands routine abrasion and knocks on the bench without losing alignment. The tool is ideal for layout on steel and similar metals, where the combination of hardened steel and carbide tips provides longevity and low maintenance compared with softer alternatives. Practical use cases and maintenance guidance This divider is intended for marking, transferring measurements and scribing arcs on components and jigs. Simple cleaning and occasional lubrication of the hinge preserve the precise motion of the rivet joint; carbide points can be honed carefully if the line quality degrades. Because of its construction, the instrument excels in tasks requiring durable, high‑contrast scribe lines and benefits workshops seeking a low‑service, long‑life marking tool. Request personalised advice or a formal quotation from Metav Werkzeuge for the Metav IndustryLine M214.205.H divider — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical data SKU: M214.205.H GTIN: 4054469159270 ECLASS: 21170305 Tariff code: 90172039 Facts Length: 400 mm Weight: 0.44 kg Standard: DIN 6486 Features Material: hardened steel Tips: carbide (hardmetal) Hinge: rivet hinge (stable adjustment) Category: Divider / compass FAQ What materials is this divider suitable for? The M214.205.H divider is built from hardened steel with carbide tips, making it suitable for marking on steel and comparable metals where durable, repeatable scribe lines are required. How does the rivet hinge affect accuracy? A rivet hinge provides a stable pivot that minimises play; this design in the M214.205.H ensures repeatable adjustment and consistent marking over many cycles. Can the carbide points be re‑sharpened? Yes, the carbide tips on the divider can be carefully honed to restore line quality; use fine diamond stones and avoid excessive material removal. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm External Divider With Riveted Hinge, Steel, DIN 6484 - Metav IndustryLine
Take advantage of the combination of 400 mm reach, robust steel construction and DIN 6484 conformity for consistent large‑format scribing and layout work. Order or enquire through Metav Werkzeuge for a reliable supply and specialist advice. Outside scribing compass M214.235 — 400 mm rivet‑hinged steel layout compass (Metav IndustryLine) The Outside scribing compass M214.235 is a rivet‑hinged layout instrument designed for precise external marking and circle scribing on medium‑sized components in workshop and production environments. 400 mm reach for large layouts Rivet hinge for secure joint play Steel construction for durable use Conforms to DIN 6484 standards Extended reach for larger components that stays stiff The 400 mm reach places this instrument in the medium‑range class (300–500 mm), which is ideal for layout tasks that require both reach and controllable stiffness. The longer legs reduce the need for repositioning when transferring centre points or scribing radii on flanges, housings and panels, while the rivet connection maintains a consistent pivot action. This combination streamlines marking operations and reduces rework by ensuring repeatable geometry across multiple parts. Stable joint and materials that support repeatability A rivet‑hinged joint provides a secure, low‑play articulation that resists loosening during routine use; this helps preserve the original setting and improves repeatability between operations. Constructed from steel, the instrument balances resistance to wear with the rigour required for daily workshop handling. Compliance with DIN 6484 documents the product’s suitability for industrial marking standards and supports a predictable quality baseline for procurement and inspection processes. Designed to increase marking efficiency and clarity The layout compass facilitates clear, visible scribed lines for machining and assembly references, reducing interpretation time at the machine bench. The tool’s geometry and robust materials enable steady handling during single‑operator tasks and when working on multiple identical components. Marking workflows benefit from fewer measurement transfers and a lower risk of cumulative error, which translates directly into time saved and fewer scrapped parts. For a detailed suitability check or to reserve stock of the Metav IndustryLine M214.235, contact Metav Werkzeuge for specialist advice and procurement assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M214.235 GTIN: 4054469107486 ECLASS: 21170325 ETIM: EC000029 Tariff code: 90172039 Standard: DIN 6484 Facts Reach / length: 400 mm Category: Zirkel (layout compass) Material: Steel SKU: M214.235 Special features Rivet hinge (fixed pivot joint) Suitable for external scribing and layout transfer Robust steel legs for workshop use FAQ What measurement range does this compass cover? The Metav IndustryLine M214.235 provides a reach of 400 mm, placing it in the medium range suitable for larger layout tasks without sacrificing handling stability. Is the joint adjustable or secured? The instrument uses a rivet hinge, which offers a secure pivot with minimal play to maintain settings during repeated marking operations. What material is the compass made from and why does that matter? The legs are manufactured from steel, chosen for durability and wear resistance so the compass retains accuracy under regular workshop use. Can this compass be used for both marking and layout on metal components? Yes, the M214.235 is intended for external scribing and layout work on metal components where a stable, repeatable marking tool is required. Does the product comply with any recognised standards? The tool conforms to DIN 6484, reflecting its suitability for standardised industrial marking applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Point Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of a robust layout tool that combines hardened steel construction with a riveted hinge and a 400 mm span for reliable marking and scribing across larger components; this ensures consistent geometry and long service life. Order the Pointed divider directly via Metav Werkzeuge or contact our consultants for specification advice. Pointed divider M214.205 — 400 mm, hardened steel, riveted hinge (Metav IndustryLine) The Pointed divider M214.205 is a workshop-grade scribing and layout instrument designed for transferring measurements and marking radii on medium to large components in metalworking and general fabrication. Hardened steel construction for durability and edge retention Riveted hinge for sustained alignment and stability 400 mm span for broader layout capability Conforms to DIN 6486 for standardised geometry Built for consistent layout and repeatable results The robust construction of this scribing tool ensures reliable repeatability when transferring dimensions or laying out circles and arcs. The hardened steel legs resist wear and maintain a sharp point geometry, which reduces the need for frequent re‑grinding and helps preserve consistent contact with the workpiece. The riveted hinge provides stable leg alignment under normal working loads, limiting play that would otherwise introduce error during marking operations. For workshop environments where reproducibility and speed are essential, this configuration reduces rework and supports efficient process flow. Practical reach for medium-format workpieces With a span of 400 mm, the instrument addresses layout tasks that exceed the reach of pocket-sized dividers while remaining manageable for single-operator use. The extended range is especially useful when marking larger plates, templates or mounting patterns, removing the need for repetitive transfers and improvised fixtures. The tool’s geometry and length strike a balance between reach and stiffness, enabling accurate scribing across the full span without excessive flex, which benefits assembly preparation and quality control in machine shops and fabrication cells. Simple handling with enduring accuracy Ergonomics and maintenance are deliberately straightforward: the plain, sturdy form factor facilitates confident hand control during scribing and ensures quick adjustments on the bench. The DIN 6486 conformity denotes a recognised standard for divider geometry, giving procurement and workshop supervisors a verifiable basis for tool selection and integration into existing measuring routines. Minimal maintenance—occasional point dressing and hinge inspection—keeps the instrument serviceable for long periods, supporting predictable shop schedules and reducing downtime. Suitable applications and how it complements shop processes This divider functions as a primary layout instrument for marking radii, transferring hole centres and setting out arcs on sheet, plate and machined components. Its durable materials and simple mechanism make it a dependable companion at the layout bench, in jigs and fixtures preparation, and where a reliable manual reference tool is preferred to avoid overreliance on powered equipment. Used alongside calipers and protractors, the device contributes to a consistent measurement chain that underpins product quality. For tailored advice or to secure the Metav IndustryLine Pointed divider M214.205 for your workshop, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on delivery and suitable accessories. Technical data SKU: M214.205 GTIN: 4054469107233 ECLASS: 21170305 Customs tariff number: 90172039 Standard: DIN 6486 Facts Length: 400 mm Category: Divider / scribing tool Weight: see product labelling for declared value Special features Material: hardened steel Riveted hinge for long-term alignment Workshop and layout applications Suitable for marking radii and transferring centres FAQ What material is the divider made from? The divider is manufactured from hardened steel, which provides wear resistance and long service life for scribing tasks. Is the hinge fixed or adjustable? The riveted hinge gives stable, lasting alignment while allowing controlled manual adjustment of the legs for layout work. What is the usable span of the tool? The instrument has a span of 400 mm, making it suitable for medium-format layout and marking operations. Does the divider comply with an industry standard? Yes, the tool conforms to DIN 6486, which standardises divider geometry for consistent performance. Which workshop tasks is this divider best suited to? It is intended for marking radii, transferring hole centres and scribing arcs on plates, templates and machined parts in fabrication and machine shops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Bow Point Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the combination of a long 500 mm reach, hardened steel construction and a stable rivet hinge for reproducible layout work; order the instrument directly via Metav Werkzeuge or consult our advisors for application guidance. Bow-point divider M214.216 — 500 mm hardened steel divider (Metav IndustryLine) A Bow-point divider M214.216 designed for accurate centre-to-centre marking, step transfers and template work across metalworking and fabrication environments. 500 mm measuring range for large templates Hardened steel for long-term wear resistance Rivet hinge ensures stable, repeatable settings Compliant with DIN 6486 workshop standard Dependable layout over extended distances The extended 500 mm span gives sufficient reach to mark large components and patterns without resorting to improvised methods, reducing handling time and layout errors. Constructed from hardened steel, the instrument retains its geometry under routine workshop stresses, which contributes to consistent repeatability across multiple parts. The relatively solid mass (approx. 0.6 kg) helps to stabilise the tool during transfer marking, improving line fidelity on sheet, plate and template surfaces. Robust hinge and secure adjustments for repeatable results A rivet-style hinge provides a straightforward, low-maintenance pivot that resists loosening in a workshop environment and preserves the chosen setting during repeated use. This stable articulation, combined with the instrument's bow-point geometry, makes the divider particularly suitable for repetitive layout tasks where identical spacing or concentric marking is required. The tool adheres to DIN 6486, reassuring workshop managers that the design meets established drawing and dimensional norms. Practical handling that suits everyday fabrication The divider balances reach with manoeuvrability: long enough for pattern work, yet compact for handheld operation and transport between workstations. The hardened steel legs withstand typical knocks and abrasion, so routine sharpening or maintenance intervals remain predictable. For users who value straightforward, mechanical tools, the instrument delivers a low-complexity solution that reduces set‑up time and dependence on powered layout aids. Applications and workshop advantages Ideal for metal fabrication, pattern making and general marking-out duties, the instrument excels where robust, repeatable spacing and centre-to-centre measurements are needed. The bow-point form allows precise scribing and centre-finding on plates, pipes and assemblies, while the plain mechanical construction minimises failure modes and supports long service life. Its compliance with familiar standards makes it an easy addition to workshop tooling schedules and inspection routines. For dependable long-range layout and durable workshop performance, request the Metav IndustryLine bow-point divider via Metav Werkzeuge or contact our Emmerich consultants for tailored application advice. Technical Data Article number: M214.216 GTIN: 4054469107318 SKU: M214.216 Facts Length: 500 mm Weight: 0.6 kg Tariff number: 90172039 Standard: DIN 6486 Special features Material: Hardened steel Hinge type: Rivet hinge Style: Bow-point divider Category: Dividers (Zirkel) FAQ What materials can be marked with this divider? The bow-point divider M214.216 is made of hardened steel and is suitable for marking on common workshop materials such as steel and non-ferrous metals for layout work. Is the hinge adjustable or permanently riveted? The instrument uses a rivet hinge designed for stable, repeatable settings rather than frequent adjustment, which favours consistent transfer marking in production tasks. Does this divider comply with any standards? Yes, the instrument is specified to DIN 6486, aligning its form and function with recognised workshop layout norms. How does the 500 mm reach benefit workshop use? A 500 mm span allows marking and step transfers on larger components and templates without improvised extensions, improving efficiency and reducing error opportunities. What maintenance does the divider require? Routine care is limited to keeping the points sharp and the hinge free of heavy debris; the hardened steel construction minimises wear and supports long service intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Internal Gauge With Rivet Hinge, Steel, DIN 6482 - Metav IndustryLine
Combining a robust steel frame, a 500 mm measuring range and a rivet hinge delivers stable, reproducible internal measurements for medium‑sized assemblies; order the Internal Caliper M214.226 directly via Metav Werkzeuge or consult our advisers for application guidance. Internal Caliper M214.226 — 500 mm rivet hinge | Metav IndustryLine An Internal Caliper M214.226 designed for reliable internal measurement of medium‑sized bores and components in metalworking and fixture fabrication. 500 mm length for larger internal diameters Robust steel construction for long service life Rivet hinge for consistent joint stability Complies with DIN 6482 measurement standards Consistent accuracy and stability for medium‑range internal measurement This instrument is a medium‑range caliper with a 500 mm span, offering the best compromise between reach and stiffness for workshop and fixture work. The steel construction ensures dimensional stability under regular use, while the rivet hinge provides a secure pivot that reduces play over time and supports reproducible measurements. Conformance with DIN 6482 signals that geometry and basic performance characteristics meet recognised mechanical standards for compasses and dividers, which simplifies integration into routine quality checks and marking workflows. Faster inspection cycles through practical handling and clear benefits Aiming at operational efficiency, the design supports confident internal checks on housings, bore seats and large assemblies with minimal repositioning. The instrument’s geometry is tuned for ease of guidance and balanced handling, making it suited to single‑operator tasks where speed and repeatability matter. By combining reach and rigidity, this caliper reduces the need for time‑consuming fixtures or multiple tools, thereby shortening inspection loops and lowering the risk of rework in production. Durable design and standards that protect measurement integrity Manufactured in steel and following the DIN 6482 specification, the tool is intended for demanding workshop conditions where robustness counts. The rivet hinge resists loosening and preserves the calibrated geometry of the jaws, which contributes to long‑term reliability. For engineering teams that require straightforward mechanical tools for internal measurement, the construction and conformance to standardised norms deliver a trustworthy basis for everyday quality assurance tasks. Contact Metav Werkzeuge in Emmerich for ordering or technical advice on the 500 mm Internal Caliper M214.226 from Metav IndustryLine; our consultants can advise on suitability for specific metalworking and fixture applications. Technical data Article number: M214.226 GTIN: 4054469107400 ECLASS: 21170336 ETIM: EC000029 Facts Length: 500 mm Customs tariff number: 90172039 Special features Material: Steel Rivet hinge Compliance: DIN 6482 Category: Dividers / compasses Brand: Metav IndustryLine FAQ What measurement range does the Internal Caliper M214.226 cover? The Internal Caliper M214.226 provides a 500 mm span, classifying it as a medium‑range instrument suitable for larger internal diameters in workshop and production settings. Is the tool supplied with an accredited calibration certificate? The M214.226 is supplied as a standard workshop instrument; there is no ISO 17025 calibration certificate included unless explicitly specified. Which materials and applications suit this caliper? The caliper’s steel construction and robust hinge make it appropriate for metalworking tasks such as inspecting housings, bore seats and fixture components where medium‑range internal measurement is required. What does compliance with DIN 6482 mean for everyday use? Compliance with DIN 6482 indicates that the instrument follows recognised mechanical specifications for compasses and dividers, ensuring predictable geometry and behaviour for marking and measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Outside Caliper With Riveted Hinge, Steel, DIN 6484 - Metav IndustryLine
Combining a 500 mm span, steel construction and a riveted hinge, this outside scriber divider delivers reliable, repeatable large‑format marking for workshop and fabrication tasks. Order the outside scriber divider directly via Metav Werkzeuge or ask our consultants if needed. Outside Scriber Divider M214.236 — 500 mm steel divider with riveted hinge (Metav IndustryLine) The Outside Scriber Divider M214.236 is a workshop‑grade divider designed for external scribing and layout work in metalworking and fabrication, providing a sturdy tool for clear, repeatable markings on large components 500 mm span for large layouts Robust steel construction Riveted hinge for secure joint Conforms to DIN 6484 Built for repeatable large‑format layout The divider is engineered around a 500 mm span that enables layout across sizeable workpieces without sacrificing control. The steel construction gives a stable feel and resists flexing during marking, while the riveted hinge forms a robust joint that maintains alignment even under frequent use. These attributes lead to repeatable results on plates, flanges and assemblies, reducing rework and downtime in production environments. Practical handling and workshop efficiency At an overall weight of 0.4 kg, the instrument balances reach with manoeuvrability so a single operator can set and transfer scribed lines comfortably. The external scribing tip and pivot geometry are optimised for reliable contact on curved and flat surfaces, speeding layout tasks without complex setup. The compact profile and straightforward adjustment support fast work cycles and clear visual orientation during marking. Standards, suitability and upkeep Built to DIN 6484, the divider meets recognised workshop standards for a measuring and marking tool of this type and is categorised as a professional divider for industrial applications. The simple steel finish is compatible with standard workshop practice for maintenance; occasional cleaning and light lubrication at the hinge preserve accuracy and extend service life. The M214.236 model is particularly suited to metalworking and fabrication tasks where robust, repeatable scribing is required. For dependable large‑format layout choose the Metav IndustryLine divider and contact Metav Werkzeuge in Emmerich for purchase or tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M214.236 GTIN: 4054469107493 Category: Divider (Zirkel) Standard: DIN 6484 Tariff code: 90172039 Numbers Length: 500 mm Weight: 0.4 kg Special features Material: Steel Riveted hinge Suitable for external scribing Category path: Messgeräte › Zirkel FAQ Is this divider suitable for marking large workpieces? Yes. The divider’s 500 mm span and sturdy construction make the Outside Scriber Divider M214.236 suitable for layout and marking across large plates, flanges and assemblies. What material is the instrument made from? The instrument is manufactured from steel, which provides rigidity and resistance to flexing during scribing operations on metal components. How durable is the hinge mechanism? The riveted hinge offers a secure, low‑play joint that preserves alignment under regular workshop use; routine light lubrication will maintain smooth operation of the M214.236. Does the divider conform to any standards? Yes. The divider is produced to meet DIN 6484, ensuring it fulfils common workshop requirements for a professional marking instrument. Is the divider appropriate for curved surfaces? The external scribing tip and pivot geometry are designed to maintain contact on both flat and curved surfaces, allowing clear transfer of scribed lines during fabrication tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Pointed Divider With Riveted Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the combination of hardened steel construction, a 500 mm measuring range and a robust rivet hinge for consistent layout and scribing results; order the tool directly via Metav Werkzeuge or consult the sales team for procurement advice. Pointed Divider M214.206 — 500 mm pointed divider with rivet hinge (Metav IndustryLine) The Pointed Divider M214.206 is a 500 mm precision layout and scribing instrument designed for marking, step measuring and transferring distances in metalworking and general workshop applications Hardened steel construction, high stiffness Rivet hinge for reliable leg alignment 500 mm measuring range for large components Conforms to DIN 6486 for workshop use Precision and longevity for routine layout tasks The pair of dividers is made from hardened steel, which increases rigidity and reduces wear on the legs, delivering repeatable marks over prolonged use. With a 500 mm span the tool covers larger layout tasks without compromising control; the long legs remain stable under normal hand pressure, enabling accurate centre-to-centre and step markings. The rivet hinge is engineered to maintain a consistent leg angle, which helps to avoid cumulative errors during multiple scribing operations, so the instrument performs reliably across production runs. Functional design that supports efficient marking The rivet hinge provides secure alignment and controlled leg movement, allowing fine adjustments that keep both legs parallel when required. The pointed tips are suited to scribing into metal and other hard surfaces, and the geometry of the legs supports both centre punching and transferring measurements between workpieces. Conformance with DIN 6486 indicates the tool meets recognised workshop standards for layout instruments, simplifying specification checks for workshop managers and quality departments. The construction focuses on low maintenance while delivering high functional availability on the shop floor. Integration into workshop processes and procurement As a traditional mechanical layout instrument, the divider requires no power or calibration equipment and is easily integrated into existing marking procedures. The simple mechanical design makes inspection and basic servicing straightforward, while the durable material choice reduces replacement frequency. For purchasing and stocking, the tool’s clear specification and standardisation under DIN 6486 support consistent procurement and quality assurance practices. Metav IndustryLine supplies the instrument ready for immediate use in industrial and craft settings. Contact Metav Werkzeuge today to arrange supply of the Pointed Divider from Metav IndustryLine or to discuss specifications for production use. Technical Data SKU: M214.206 GTIN: 4054469107240 ECLASS: 21170305 Tariff number: 90172039 Facts Length: 500 mm Standard: DIN 6486 Special features Hardened steel Rivet hinge (nietscharnier) Category: Divider / layout instrument FAQ What is the measuring range of the divider? The divider offers a 500 mm maximum span suitable for larger layout tasks and transferring distances on medium to large components. Which material is used for the legs? Legs are manufactured from hardened steel, chosen for stiffness and wear resistance to ensure long service life under workshop conditions. How does the rivet hinge affect accuracy? The rivet hinge maintains stable leg alignment during marking and measuring, reducing angular play and ensuring repeatable results over repeated use. Is the tool suitable for metal scribing? Yes, the pointed tips and hardened-steel legs are intended for scribing and layout on metal and comparable hard materials. Does the product comply with any standards? The instrument conforms to DIN 6486, aligning with commonly expected workshop standards for layout tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Rod Caliper With Carbide Tips, Flat Square Beam, Vernier 0.05mm Accuracy - Metav IndustryLine
Take advantage of the combination of robust construction, replaceable carbide tips and precise fine adjustment for reproducible measurements in jig and mould making. The instrument’s stainless steel build and 500 mm range deliver a reliable balance of reach and stiffness; order the 500 mm rod caliper with carbide tips directly via Metav Werkzeuge or ask our consultants if needed. 500 mm rod caliper with carbide tips — vernier rod caliper by Metav IndustryLine A 500 mm rod caliper with carbide tips designed for medium‑range workshop and fixture measurements, providing steady guidance and repeatable contact on larger assemblies. Robust stainless steel construction Replaceable carbide tips for long life Vernier scale with matt‑chrome graduations Fine adjustment for controlled contact Reliable measurement for medium‑sized components Built for the demands of jig, fixture and mould fabrication, this caliper delivers a measured compromise between reach and rigidity. The 500 mm measurement span places the instrument in the medium range for calipers, suitable where extended reach is required without excessive flex. Constructed from stainless steel with a vernier scale, the tool offers consistent stiffness across its length so that single‑handed measurements remain reproducible and suitable for routine workshop quality checks. Durable carbide tips and controlled contact The inclusion of replaceable carbide tips extends service life where repeated contact or abrasive edges are present; carbide resists wear far better than standard steel. The integrated fine adjustment mechanism permits gradual closing pressure, reducing operator‑induced variation during measurement. Together these features support a lower process variation and longer intervals between maintenance or tip replacement. Clear reading and vernier precision The vernier division with matt‑chrome graduations is calibrated for practical readability in workshop light. With a typical vernier resolution of 0.05 mm, the instrument fits industrial tolerances for general metalworking and machine‑shop tasks. The scale layout and contrast aid rapid interpretation, while the mechanical nonius avoids electronic dependency for environments where robustness and simplicity are priorities. Practical handling and workshop integration At a measured mass of 4 kg, the instrument offers stable handling when measuring larger castings or assemblies; the weight contributes to stable contact yet remains manageable for two‑person handling where necessary. The design emphasises serviceability: tips are user‑replaceable and the mechanism is straightforward to maintain. For process implementation, this caliper integrates easily into inspection benches or jigs as a reliable analogue measuring reference. Contact Metav Werkzeuge for tailored advice on integrating the 500 mm rod caliper with carbide tips into production and to arrange supply from Emmerich Technical Data Article number: M201.174 GTIN: 4054469100883 Tariff number: 90173000 ECLASS: 21170344 Weight: 4 kg Core numerical data Measurement range: 0–500 mm Reading/resolution: 0.05 mm Tip dimension: 60 SKU: M201.174 Special features Stainless steel construction Vernier (nonius) scale with matt‑chrome graduations Replaceable carbide (hardmetal) tips Fine adjustment mechanism Suitable for workshop and fixture measurement FAQ How accurate is the reading on this caliper? The vernier layout provides a practical 0.05 mm reading resolution, matching typical industrial tolerances for mechanical workshop work with the M201.174 rod caliper. Are the carbide tips replaceable and economical to service? Yes, the tool features replaceable carbide tips, allowing targeted renewal of wear parts without replacing the entire instrument; this supports lower life‑cycle costs for the Metav IndustryLine caliper. Is this instrument suitable for measuring larger assemblies? The 500 mm measurement range positions the caliper in the medium category, making it appropriate for larger components, fixture parts and many mould elements where repeatable stiffness and reach are required. Does the caliper require electronic power or special maintenance? The caliper is an analogue vernier instrument with mechanical fine adjustment and does not require power; routine maintenance is limited to tip inspection and lubrication of the slide. Which workshop applications match the design of this caliper? Typical uses include machine‑shop inspection, jig and fixture setup and mould component measurement, where robust contact points and stable guidance are priorities for repeatable results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Rod Divider With Carbide Marking Tips Ø25x100 - Metav IndustryLine
Beam compass combines stainless steel construction, carbide scribing tips and a 0–500 mm working range for reliable workshop layout and marking. Order the tool directly via Metav Werkzeuge or consult our advisors for application support and delivery options. Bar compass M201.274 (Beam compass) — 0–500 mm, carbide-tipped Bar compass M201.274 is a workshop-grade beam compass for precise scribing and layout of medium-sized components, designed for machine shops, toolrooms and general metalworking. Stainless steel construction for longevity Carbide scribing tips for crisp markings 0–500 mm range for medium workshop tasks Compatible with calipers up to 1000 mm diameter Durable construction for consistent layout work The beam compass is manufactured from stainless steel, giving a stable and wear-resistant beam that keeps its geometry under frequent use. The solid design reduces flexing during longer scribing strokes and maintains alignment over time, which in practice lowers the risk of rework. With a mass of 2 kg and a rod diameter of 19 mm, the unit balances handable weight with sufficient stiffness for repeatable marking on sheet, plate and assemblies. Carbide points for precise and lasting marks Equipped with carbide scribing tips, the divider produces consistently visible layout lines on hard and abrasive surfaces. Carbide tips retain a sharp edge significantly longer than plain steel, so the marking quality remains constant over extended production runs. The measuring tips are sized Ø25 × 100 mm, optimised for stability when engaging the workpiece; this ensures crisp scribe traces even on thicker or textured materials, supporting accurate downstream machining or drilling operations. Practical range and workshop compatibility Classified in the medium range for calipers and beam tools, the compass covers 0–500 mm, which is the typical span needed in machine and metal workshops for fixtures, housings and medium-sized components. The design is also specified as compatible with calipers for diameters up to 1000 mm, allowing integration into existing layout workflows and simplifying transfers between measuring and marking operations. The analogue concept removes dependence on batteries or electronics, enabling immediate use at the bench or on the shop floor. Straightforward handling that supports productivity Analogue adjustment and a plain but effective locking mechanism make the tool fast to set up and simple to reuse throughout a shift. The instrument’s readable geometry and robust tips reduce interruptions for tip dressing or replacement, helping maintain throughput. Supplied as a practical workshop instrument rather than a delicate precision gauge, it suits technicians and craftsmen who require dependable layout capability day in, day out—backed by Metav’s focus on reliable supply and industry-grade products. For a dependable beam compass from the Metav IndustryLine range, contact Metav Werkzeuge in Emmerich to discuss suitability for specific applications or to arrange purchase; the Metav team can provide precise ordering and delivery information via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.274 GTIN: 4054469182742 Manufacturer: Metav IndustryLine Facts Measuring range: 0–500 mm Maximum measuring range: 500 mm Weight: 2 kg Rod diameter: 19 mm Suitable for calipers/diameters up to 1000 mm Special features Material: stainless steel (INOX) Carbide (HM) scribing tips Analogue beam compass configuration Measuring tips Ø25 × 100 mm ECLASS: 21170344 FAQ How is the beam compass best used for layout tasks? The beam compass is intended for scribing and dividing work across medium-sized components; its stainless-steel beam and carbide tips allow clear layout lines for subsequent machining or assembly when using the Bar compass M201.274. Can the tool mark hard materials reliably? Yes. The carbide-tipped points maintain sharpness on harder or abrasive surfaces, so the compass provides durable, repeatable scribing without rapid wear. Is this instrument suitable for workshop and machine-shop use? The construction and 0–500 mm range make it suitable for standard machine-shop layout; the design balances stiffness and reach for everyday marking tasks. Are the measuring tips large enough for stable marking? The measuring tips are specified as Ø25 × 100 mm, offering a stable contact area that supports consistent scribe depth and visible marks, reducing slippage on textured surfaces. Does the product work with large-diameter measurements? The unit is compatible with calipers and setups handling diameters up to 1000 mm, enabling its use in broader layout workflows and with larger fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60 mm Carbide Replacement Tip Ø8 mm for Rod Caliper up to 500mm, - Metav IndustryLine
Take advantage of a carbide contact and precise dimensions to restore measuring reliability for medium-range calipers; the spare tip reduces wear-related variation and keeps inspection cycles stable. Order the component directly via Metav Werkzeuge or contact the consultants for fitment advice. Replacement tip for rod-compass caliper up to 500 mm, carbide, 60 mm, Ø 8 mm (Metav IndustryLine) Replacement tip for rod-compass caliper up to 500 mm, carbide, 60 mm, Ø 8 mm offers a hard-wearing contact solution for workshop and toolroom metrology, designed to fit specified Metav caliper models Carbide tip for long wear resistance 60 mm length with Ø 8 mm shank Compatible with M201.173/174 calipers Durability that maintains measurement stability The carbide tip provides high hardness and excellent wear resistance, which reduces contact deformation during frequent measurements. This leads to improved repeatability and fewer recalibrations compared with softer contact points. A single, robust contact piece lengthens service intervals and supports consistent inspection processes in production and quality control, ensuring measured values remain reproducible across repeated checks. Fast replacement to reduce downtime Designed with a 60 mm working length and an Ø 8 mm shank, the tip slips into the holder with a secure fit and minimal adjustment. Compatibility with M201.173/174 calipers streamlines maintenance procedures and shortens setup time for routine swaps. The direct replacement format eases inventory planning for spares and supports uninterrupted measuring capability, which helps maintain throughput in busy workshops. Suitable for medium‑range measuring tasks in the workshop Classified for medium-range calipers (up to 500 mm), this spare tip is intended for applications where reach and stiffness need to be balanced, such as measuring fixtures, housings and medium-sized components. The hardened contact surface resists abrasion from repeated edge contact and preserves the caliper’s original measuring characteristics. Metav’s supply of this component reflects a practical approach to keeping metrology tools serviceable and dependable in everyday industrial use. Contact Metav Werkzeuge today to confirm compatibility for M201.173/174, secure the correct replacement tip and maintain uninterrupted measuring performance — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M201.173.2 GTIN: 4061905053603 Manufacturer: Metav IndustryLine Facts Length: 60 mm Shank diameter: Ø 8 mm Weight: 0.02 kg Special features Material: Carbide (Hartmetall) Compatible with: M201.173/174 calipers Suitable for: Medium-range calipers (up to 500 mm) FAQ Is this tip compatible with other caliper models besides M201.173/174? Compatibility is specified for M201.173/174; adaptations for other models may require verification of shank diameter and holder design before use with the replacement tip. What advantages does the carbide contact bring for workshop use? The carbide contact offers superior wear resistance and dimensional stability, which helps the caliper maintain repeatable readings under frequent use and reduces the need for early replacement. How simple is the installation of the replacement tip? Installation is straightforward: the Ø 8 mm shank is intended to fit the corresponding holder on the specified calipers and allows quick replacement to minimise downtime. Can this tip be used for precision laboratory work? While robust and wear‑resistant, the tip is primarily aimed at workshop and toolroom metrology for medium‑range measurements rather than ultra‑high-precision laboratory applications. Will replacing the tip affect calibration of the caliper? A correctly fitted, manufactured replacement tip preserves the original contact geometry; calibration status should be checked after replacement as part of normal quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Bow Divider With Riveted Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Reliable long-reach scribing and robust hinge construction make this divider a practical choice for workshop layout and pattern work; benefit from hardened steel construction, a 600 mm working span and DIN 6486 conformity. Order the divider directly via Metav Werkzeuge or consult our specialists for application advice. Bow divider M214.217 — 600 mm, hardened steel, riveted hinge (Metav IndustryLine) The Bow divider M214.217 is a heavy-duty workshop divider designed for marking, transferring and laying out arcs and radii up to 600 mm, suited to metalworking and pattern-making tasks Robust hardened steel construction 600 mm working span for large arcs Riveted hinge for long-term stability Manufactured to DIN 6486 standard Accuracy and reach that support reliable layout work The combination of a long-legged design and hardened construction gives a clear technical advantage when marking large components. With a working span of 600 mm, this divider extends the reach of conventional layout tools while remaining manageable at a weight of 0.7 kg. The hardened steel legs reduce wear at the tips and pivot points, so scribed lines stay consistent across repeated operations. Conformity with DIN 6486 provides an assured baseline for dimensions and interchangeability on standard benches and jigs, which supports predictable workflow integration and quality control. Built for durability and repeatable pivot behaviour A riveted hinge is the defining mechanical feature for long-term workshop use: the joint is compact, resistant to loosening under vibration and designed to maintain alignment through repetitive opening and closing. This construction reduces play at the pivot and helps preserve the original setting, translating to fewer rechecks and less rework on marked parts. The solid steel build also tolerates the knocks and handling typical for daily shop use, so the instrument delivers serviceable life and consistent performance in industrial environments. Practical advantages across metalworking and pattern-making This divider is optimised for layout, template transfer and scribing on a variety of metalwork tasks where large radii or spacings are required. The long legs and rigid profile make it suitable for marking sheet, plate and fixture surfaces; the modest mass keeps it simple to position and manoeuvre for one‑person operation. Where repetitive or large-format marking is part of production, the instrument supports faster set-ups and clearer transfer lines, improving downstream fit and assembly. The robust construction and clear technical specification mean this tool integrates well into standardised workshop procedures and documentable inspection routines. Contact Metav Werkzeuge today to discuss the M214.217 bow divider and find the best configuration for your application; the Emmerich team offers direct technical advice by email or phone Technical data Article number: M214.217 GTIN: 4054469107325 Manufacturer: Metav IndustryLine Facts Length: 600 mm Weight: 0.7 kg Special features Material: hardened steel Riveted hinge Standard: DIN 6486 FAQ What range of radii can be scribed with this divider? The bow divider M214.217 covers arcs up to a 600 mm span, providing large-radius capability for layout and template work. Is the hinge serviceable or adjustable? The riveted hinge is designed for durability and to minimise play; it provides stable pivot behaviour suited to repeated use rather than frequent user adjustment. What materials is this divider intended for? The M214.217 is constructed from hardened steel and is suitable for marking and scribing on common workshop materials such as steel plates and non-ferrous metals. Does the product conform to any standards? Yes, the instrument is manufactured in accordance with DIN 6486, ensuring consistent dimensional characteristics for workshop use. How heavy and portable is the divider for bench work? Weighing 0.7 kg, the divider offers a balance between rigidity and portability, making one-person handling practical for most layout tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm External Divider With Riveted Hinge, Steel, DIN 6484 - Metav IndustryLine
Benefit from the combination of a rivet-hinge for repeatable alignment, a 600 mm reach for large workpieces and robust steel construction to secure consistent marking. Order the divider directly via Metav Werkzeuge or consult our specialists for application advice. Outside divider, riveted hinge, 600 mm (Metav IndustryLine) Outside divider, riveted hinge, 600 mm is a steel outside-measuring divider designed for marking, transferring diameters and setting distances on large components in workshop and fabrication environments. Riveted hinge for repeatable alignment 600 mm reach for large workpieces Solid steel construction for longevity Conforms to DIN 6484 for standard compliance Accurate marking across large components Built for reliable workshop use, this outside divider features a rivet hinge that locks the legs in a stable position, enabling repeatable alignment when marking circles or transferring measurements. The 600 mm reach expands the usable range compared with standard compasses, so larger diameters and greater spans can be scribed without improvisation. The instrument’s balance—at 0.6 kg—provides enough mass to reduce vibration during marking while remaining manageable for single‑operator tasks. These attributes translate into faster set‑ups and fewer reworks, which is a practical efficiency advantage in production and maintenance routines. Robust construction that keeps maintenance low Manufactured from steel and produced to DIN 6484, this divider is designed for everyday workshop stresses. The riveted joint resists loosening under repeated adjustment, reducing the need for frequent retensioning or repairs. Compliance with the stated standard gives a verifiable basis for quality assurance processes and supports consistent results across batches of work. The combination of solid material selection and simple, serviceable mechanics means predictable lifetime costs and less downtime compared with lighter, non‑standard alternatives. Easy integration into workshop workflows The simple form factor and familiar operation make the tool straightforward to include in layout and marking stations. The instrument’s long span is particularly useful in sheet‑metal fabrication, pipe marking and layout of mould components where extended reach is required. Settings made on the device remain stable thanks to the riveted hinge, supporting repeatable processes and clear handover between operators. For specification checks or to ensure the instrument matches particular application needs, guidance from Metav’s application specialists is available to help select the correct measuring and marking equipment for the task. Choose the Metav IndustryLine outside divider when stable, long‑reach marking is required — contact Metav Werkzeuge in Emmerich for tailored application advice or to order through our experts. Technical data Article number: M214.237 GTIN: 4054469107509 Manufacturer: Metav IndustryLine Facts Length: 600 mm Weight: 0.6 kg Tariff number: 90172039 Special features Material: Steel Riveted hinge Standard: DIN 6484 Category: Divider FAQ What tasks is this outside divider suitable for? This outside divider is intended for marking, transferring diameters and setting distances on larger workpieces; the 600 mm span makes it suitable for sheet metal, pipe marking and mould layout tasks. Is the hinge adjustable or fixed? The riveted hinge is a secure, serviceable joint designed for stable settings and repeatable alignment; it is not a quick‑release clamp but provides long‑term positional stability. Which standard does the tool comply with? The tool is produced to DIN 6484, ensuring a standardised shape and manufacturing quality for consistent workshop use. How heavy is the instrument and how does that affect handling? At 0.6 kg the instrument provides sufficient mass for stable marking while remaining manageable for single‑person operation during layout tasks. Can this divider be used for precision measurement tasks? While primarily a marking and layout instrument, the stable joint and robust construction support reproducible scribing; for laboratory‑grade dimensional measurement, dedicated metrology instruments are recommended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Internal Caliper With Rivet Hinge, Steel, DIN 6482 - Metav IndustryLine
Take advantage of the robust steel construction, the 600 mm measuring reach and the rivet hinge for stable, repeatable internal measurements; order via Metav Werkzeuge or contact our consultants for application advice. Internal Caliper M214.227 — 600 mm steel inside caliper with rivet hinge (Metav IndustryLine) The internal caliper M214.227 is a purpose‑built 600 mm steel instrument with a rivet hinge, designed for repeatable internal measurements in workshops, toolrooms and production environments 600 mm measuring range Solid steel construction Rivet hinge for stable operation Conforms to DIN 6482 Stable long‑reach measuring for reliable results The instrument is engineered for reproducible internal measurements over a long span: the 600 mm reach provides access to deep bores and large housings while the steel construction keeps the profile rigid and resistant to flexing. Compliance with DIN 6482 ensures that the geometry and tolerances match recognised workshop standards, which reduces rework and speeds up quality checks. The rivet hinge delivers a consistent pivot with low play, translating to dependable repeatability when checking diameters or step depths on medium‑sized assemblies. Practical handling that suits daily workshop routines Designed for straightforward handling, this inside caliper combines a simple, robust mechanism with a geometry that supports steady one‑hand operation where practical. The rivet hinge is maintenance‑friendly and, together with the plain steel profile, offers long service life even under frequent use. Classified in the large class (measuring range up to 1,000 mm), the tool bridges the gap between compact gauges and heavy long‑span devices, making it especially suitable for jig, fixture and component inspection in metalworking and fabrication shops. Trusted supply and application support from Metav Sourced under the Metav IndustryLine umbrella, the caliper benefits from a distribution concept that focuses on accessibility and consistent quality. Metav’s quality filter in Emmerich guarantees that workshop‑grade measuring tools meet practical demands, while a broad product range simplifies procurement for maintenance and production teams. For customers seeking clear, workshop‑oriented measurement solutions, this caliper combines ruggedness with conformity to familiar standards and the reassurance of a well‑established supplier network. Speak to Metav Werkzeuge in Emmerich to confirm whether the Metav IndustryLine internal caliper M214.227 with 600 mm measuring range and DIN 6482 compliance meets the specific requirements of the production task and to arrange expert technical advice Technical data Article number: M214.227 GTIN: 4054469107417 Brand: Metav IndustryLine Standard: DIN 6482 Category: Divider / caliper (Zirkel) Dimensions & core values Measuring range: 600 mm Length: 600 mm Tariff number: 90172039 Special features & materials Material: Steel Rivet hinge Designed for internal measurements Suitable for workshop and toolroom use FAQ What measuring tasks is this caliper intended for? This internal caliper M214.227 is intended for internal diameter, step and bore assessments on medium‑sized components where a 600 mm reach and a rigid steel profile are required. Does the caliper meet any standards? Yes, the Metav IndustryLine internal caliper M214.227 conforms to DIN 6482, ensuring geometric and tolerancing compatibility with common workshop inspection procedures. How robust is the hinge and construction? The rivet hinge and steel construction provide a durable pivot and profile: the design focuses on low play and long‑term stability for repetitive internal measurement tasks. Can this tool be used in a quality control routine for medium assemblies? The 600 mm reach and adherence to DIN 6482 make the Metav IndustryLine M214.227 suitable for routine inspection of medium assemblies, jigs and housings within workshop and production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Pointed Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the combination of long reach, hardened steel construction and a stable rivet hinge for reliable layout and transfer work in the workshop; order the divider directly via Metav Werkzeuge or consult the Metav team for application advice. Pointed divider M214.207 — 600 mm rivet-hinge divider in hardened steel (Metav IndustryLine) A Pointed divider M214.207 designed for precise scribing and transfer marks on large components in engineering and metalworking environments. 600 mm span for large-format layout work Hardened steel construction for long life Rivet hinge ensures stable, precise joint Conforms to DIN 6486 for standard compliance High reach with consistent marking accuracy The long-span 600 mm reach gives this divider the range required for larger templates, flanges and sheet-work while maintaining repeatability. Constructed from hardened steel, the tool resists wear at the points and along the legs, which sustains the initial setup and reduces the need for frequent reworking. The compact mass of 0.7 kg keeps handling comfortable during repetitive layout tasks and ensures that the instrument remains controllable over longer strokes. The rivet hinge gives a consistently stable pivot that minimises play between the legs, so marks remain accurate across the whole span. These characteristics make the tool especially suitable where stable geometry and clear scribe lines are required for downstream machining or assembly. Robust build for workshop durability and dependable performance Durability and low maintenance are central to the divider’s design. The hardened steel construction offers resistance to abrasion and the effects of workshop use, while the simple rivet-joint design reduces mechanical complexity and avoids components that commonly fail. The tool’s conformity to DIN 6486 indicates adherence to an accepted standard for dividers and compasses, providing a verifiable basis for procurement decisions in professional environments. The balance between a rigid leg profile and a manageable weight supports precise manual operation without fatigue, allowing consistent results during extended layout sessions or repetitive marking operations. Practical integration into everyday production workflows As a purpose-built marking instrument, the divider integrates directly into layout benches, tool rooms and on-site assembly areas. The long reach accommodates larger parts that would otherwise require stepwise scribing or multiple setups, improving efficiency and reducing cumulative positioning error. The straightforward, no-frills construction of this model makes it a reliable addition to the standard toolkit for machinists, pattern makers and maintenance teams who value predictable, serviceable tools. Where documentation is required, the product’s classification and data support traceability and inventory management in production environments. For straightforward procurement or specific application guidance, contact Metav Werkzeuge to discuss the Pointed divider M214.207 and its suitability for the intended marking tasks. Technical data Article number: M214.207 GTIN: 4054469107257 Tariff number: 90172039 ECLASS: 21170305 Facts Length: 600 mm Weight: 0.7 kg Special features Material: hardened steel Joint: rivet hinge Standard: DIN 6486 Category: Divider FAQ What applications is this divider suited for? The Pointed divider M214.207 is designed for scribing and transfer marking on larger components, making it suitable for metalwork, template work and general engineering layout tasks. How does the rivet hinge affect performance? The rivet hinge provides a stable, low-play pivot so that leg geometry remains constant; this stability supports repeatable marking across the tool’s full span. Is the material suitable for workshop use? Yes — the divider is made from hardened steel, which improves wear resistance of the points and legs and supports long-term accuracy in daily workshop use. Does the divider meet any industry standards? This model conforms to DIN 6486, offering standard-compliant geometry and manufacturing relevant for professional procurement and quality records. What are the physical dimensions and weight? The instrument has a 600 mm span and weighs 0.7 kg, providing long reach while remaining manageable for manual layout work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Bow Divider With Rivet Hinge Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of a combination of long-range capacity and rugged construction for reliable scribing across large components; the robust rivet hinge and hardened steel arms ensure stability and repeatable results for pattern work and layout. Order directly via Metav Werkzeuge or ask the consultants for tailored advice. Bow-point divider M214.218 — Metav IndustryLine, 800 mm span, riveted hinge The Bow-point divider M214.218 is a long-span scribing instrument for layout and transfer work in metal and woodworking shops, designed for accurate marking on large components and templates 800 mm measuring span Hardened steel construction Riveted hinge for stable joints Complies with DIN 6486 Long-span accuracy for large-format layout The instrument’s elongated arms deliver an 800 mm span that makes large circles and long arcs straightforward to lay out, reducing the need for repeated setups. Built from hardened steel, the frame resists deformation under normal workshop loads so linear accuracy is preserved over time. The geometry of the bow-style legs maintains constant contact pressure at the points, which supports precise scribing on sheet metal, timber and templates where repeatability matters. Stable joint and confident handling A rivet hinge provides a durable pivot that stays true through frequent use; the riveted joint minimises play and offers consistent pivot friction for controlled movement. At a mass of 1.9 kg, the tool balances solidity with manoeuvrability, helping to keep both hands free for guiding and securing the workpiece. These properties reduce measurement variation and speed up layout tasks in production and jig-making environments. Practical benefits for workshop and production use Conformance with DIN 6486 signals that the design follows recognised standards for marking and layout tools, making the divider a dependable choice for workshop routines and quality-conscious operations. The robust material choice and straightforward construction mean low maintenance and long service life, translating into fewer tool replacements and stable process outcomes for fabrication, repair and pattern-making. Versatile application and efficiency gains This long-arm divider is suited to large-format jobs in metalworking, carpentry and pattern shops where reliable repeat scribing and transfer work reduce cycle time. The instrument’s simple geometry and rugged hinge make it an efficient alternative to repeated measuring, helping maintain consistent offsets and centre marks across assemblies — a pragmatic investment for teams focused on throughput and reproducibility. Contact Metav Werkzeuge today to discuss the Bow-point divider M214.218 from Metav IndustryLine and secure a durable, long-span scribing solution tailored to large-format layout needs — Metav Werkzeuge is available at Parkring 45, Emmerich, for enquiries and supply. Technical data Article number: M214.218 GTIN: 4054469107332 Tariff code: 90172039 Facts Measuring span: 800 mm Weight: 1.9 kg Standard: DIN 6486 Special features Material: Hardened steel Joint: Riveted hinge Category: Divider (bow-point) FAQ What is the maximum span of this divider? The divider offers an 800 mm maximum span, specified as the measuring reach for the M214.218 bow-point divider. Which material is used for the arms and how does it affect durability? The arms are made from hardened steel; this increases wear resistance and helps retain accuracy during prolonged workshop use. Is the joint suitable for frequent professional use? Yes. The riveted hinge provides a robust pivot that minimises play and is intended for repetitive layout tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Internal Dial Caliper With Rivet Hinge, Steel, DIN 6482 - Metav IndustryLine
Benefit from a combination of extended reach and robust construction that supports repeatable scribing across large components; the inside divider with rivet hinge delivers controlled handling and clear alignment over an 800 mm span. Order the tool directly via Metav Werkzeuge or consult the team for application advice. Inside divider with rivet hinge – 800 mm, 1.0 kg (Metav IndustryLine) An inside divider designed for scribing and layout on large components, featuring a rivet hinge and a substantial 800 mm span for workshop and fixture applications Robust steel construction, rivet hinge 800 mm length for large components Complies with DIN 6482 standard Extended reach for large-format layout The 800 mm span places this instrument in the large measurement class (measurement range up to 500–1,000 mm), making it suitable for layout, centre‑finding and scribing on plates, housings and large assemblies. The long legs provide the reach required for workpieces that exceed the range of standard compasses, while the geometry retains sufficient stiffness to keep points aligned. In practice, this reduces repositioning and speeds up repetitive marking tasks on machining or fabrication projects. Durable mechanism and standard conformity Constructed from steel with a rivet hinge, the tool prioritises long‑term rigidity and repeated accuracy under workshop conditions. The riveted joint offers a reliable pivot that resists loosening during use; with a nominal mass of 1.0 kg, the balance helps stabilise the instrument when transferring measurements. Compliance with DIN 6482 ensures that dimensions and functional design meet established drawing‑instrument criteria, simplifying integration into existing quality processes and inspection routines. Practical handling and workshop advantages The instrument is designed for straightforward workshop use: the robust legs and point geometry permit precise scribing along edges and inside diameters, while the solid construction simplifies clamping or steadying on larger assemblies. Where consistent alignment over distance is essential, the long‑span divider reduces the need for temporary fixtures. Maintenance is limited to routine cleaning and occasional hinge inspection, so downtime is minimal and service life is extended. As a manual layout tool, it complements machine measurement systems and supports quick checks before machining or welding operations. Choose Metav IndustryLine for accessible precision: for large‑range scribing tasks the inside divider with rivet hinge offers durable control and clear compliance with DIN standards — contact Metav Werkzeuge to discuss application specifics or to place an order. Technical Data SKU: M214.228 GTIN: 4054469107424 Material: Steel Length: 800 mm Weight: 1.0 kg Standard: DIN 6482 Tariff number: 90172039 ECLASS: 21170336 ETIM: EC000029 Facts Measurement range class: Large (up to 500–1,000 mm) Mass: 1.0 kg Primary material: Steel Special features Rivet hinge for stable pivoting Compliant with DIN 6482 Category: Divider / Scribing compass Suitable for layout on large components FAQ What is the primary application of this divider? The inside divider with rivet hinge is intended for scribing, centre finding and layout work on large components where an 800 mm span is required. How robust is the construction for daily workshop use? Built from steel with a rivet hinge, the instrument offers a durable pivot and solid leg stiffness, making the divider suitable for regular use in fabrication and machining environments. Does the tool meet any industry standards? Yes, the product complies with DIN 6482, ensuring conformity with recognised drawing‑instrument specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Outside Caliper With Riveted Hinge, Steel, DIN 6484 - Metav IndustryLine
Take advantage of the combination of a long 800 mm reach, robust steel construction and a precision rivet hinge for reliable large-format marking and layout work; order the divider directly via Metav Werkzeuge or ask our consultants for application advice. External divider M214.238 — 800 mm steel divider with rivet hinge (Metav IndustryLine) The External divider M214.238 is a long-reach steel divider designed for layout and scribing of large components in metalworking, fabrication and workshop assembly. 800 mm reach for large components Rivet hinge for consistent alignment Solid steel construction for longevity Compliant with DIN 6484 for standard use Long reach that speeds up large-format layout The 800 mm span enables fast, repeatable marking across larger workpieces without the need to re‑position smaller tools. As a long‑reach divider made from steel, this tool combines reach with the stiffness required for accurate scribing on plate, sheet and fabricated assemblies. Conformity with DIN 6484 ensures the geometry and hinge arrangement follow an established standard, which aids interchangeability and predictable behaviour in workshop processes. The result is shorter set-up times and fewer alignment checks during serial layout tasks. Stable hinge and construction for reproducible results A precisely formed rivet hinge minimises play and secures a steady leg angle during use, which translates directly into improved precision and repeatability of marks. The steel construction resists bending and wear in everyday shop conditions, delivering a robust feeling in the hand and a durable working life. For practical purposes this means fewer adjustments between measurements and less downtime for maintenance, so layout operations proceed more smoothly and confidently. Built for pragmatic workshop use and heavy duty tasks This large-format divider serves layout, scribing and transfer tasks where a conventional small divider would require multiple steps. The tool’s construction suits metalworking and general fabrication; the combination of reach, stiffness and standardised hinge design supports consistent transfer of dimensions across longer distances. Alongside its functional benefits, the design is straightforward to handle and maintain, making it a reliable addition to a production bench or maintenance trolley for repeated, clear markings. Contact Metav Werkzeuge in Emmerich for tailored guidance on integrating the Metav IndustryLine M214.238 into current workflows and for a customised quotation. Technical data Article number: M214.238 GTIN: 4054469107516 Manufacturer: Metav IndustryLine eClass: 21170325 ETIM: EC000029 Facts Length: 800 mm Zolltarifnummer: 90172039 Special features Material: Steel Hinge: Rivet hinge Standard: DIN 6484 Category: Divider / Zirkel FAQ What reach does the divider offer? The Metav IndustryLine external divider M214.238 has an 800 mm reach suitable for large components and extended layout work. What material and hinge type are used? This divider is constructed from steel and uses a rivet hinge to provide stable alignment and long service life. Which standard applies to this tool? The tool is manufactured in accordance with DIN 6484, ensuring standardised hinge geometry and predictable performance. Is the divider intended for metalworking tasks? Yes, the M214.238 is designed for workshop and fabrication applications such as scribing, marking and transferring dimensions on metal assemblies. How does the rivet hinge improve results? The rivet hinge reduces play and secures the legs at the chosen span, improving repeatability of marks and lowering the need for frequent re‑adjustment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pinpoint layout and repeatable radii for workshop precision
The category covers dividers for industrial scribing and measurement transfer, including bow compasses, point dividers and scribing compasses designed for heavy-duty workshop use. These tools serve the essential task of transferring centres, radii and distances reliably onto metal and other workpiece surfaces.
How dividers and related tools work in production
Used alongside granite surface plates and height gauges, dividers enable exact layout of bores, edges and machining references before cutting or drilling. In practice, parallel scribing gauges and ergonomic scribing needles with carbide tips create fine, durable lines on hardened steel without weakening the material. For vertical measurements, height gauges — from mechanical models with vernier or double-counter readouts to digital height gauges with high resolution, data interfaces and quick tolerance checks — ensure height transfer that integrates with traceable measuring workflows. Measuring dividers with hardened points and robust joints keep set dimensions stable, even under repeated use, while quick-clamp fine adjustments permit rapid re‑setting during batch production.
Tangible benefits that improve throughput and quality
- Increased first-pass yield through accurate transfer of bore centres and edges.
- Reduced setup time via stable fixation and quick-clamp fine adjustments.
- Longer service life thanks to components in hardened tool steel, stainless alloys and carbide tips.
- Seamless integration into inspection routines using digital height gauges with data-export capabilities.
- Consistent repeatability when scribing radii and distances with engineered joint stability.
Metav as your precision partner for everyday workshop needs
Metav combines decades of measurement expertise with a broad selection of workshop-grade layout tools, making high accuracy accessible for industry and trade. With over 48,000 customers and a central quality hub in Emmerich, Metav provides a dependable supply of dividers, scribing compasses and measuring dividers that reduce supplier complexity and support continuous production.
Key takeaway
For reliable pre‑machining layout, dividers and associated scribing and height-measuring tools ensure exact geometry transfer, minimising waste and streamlining shopfloor processes.
FAQ
What types of dividers are best for heavy-duty steel layout?
For heavy-duty steel layout, choose measuring dividers or point dividers with hardened points and robust joints; these designs keep measurements fixed under repeated use and produce clear scribe lines on hardened surfaces.
Can digital height gauges be integrated into quality documentation?
Yes. Digital height gauges in this range offer high resolution and data interfaces that allow direct transfer of measured values for tolerance checks and traceable quality records.
How do scribing compasses differ from standard compasses?
Scribing compasses are built for industrial use: they feature hardened tips, stable joints and fine-adjust mechanisms, unlike lightweight drawing compasses intended for paper or light materials.
Are there solutions for quick re‑setting during batch work?
Measuring dividers with quick-clamp fine adjustments enable fast, repeatable re‑setting, reducing downtime between consecutive parts without sacrificing precision.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com