Precision marking and layout compasses to ensure exact transfers
Precision marking compasses and layout compasses are indispensable for transferring radii and distances with pinpoint accuracy in metalworking and toolmaking, offering reliable layout for subsequent machining operations. These compasses, spanners and scribing dividers excel at marking centre points and contour lines on hardened steel and other workshop materials, reducing scrap and ensuring consistent part fit. Made from hardened tool steel and fitted with wear-resistant tips, they provide durable, repeatable performance for layout, inspection and jig preparation. Integrating these tools into your workflow improves dimensional control, speeds up set-up and supports quality assurance across production environments.
400mm Centre Compass With Carbide Tips, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the hardened steel construction, carbide points and a secure rivet hinge for reproducible marking and long service life — order the tool directly via Metav Werkzeuge or consult our advisors for application-specific guidance. M214.205.H Carbide‑point divider, 400 mm — hardened steel, rivet hinge | Metav IndustryLine M214.205.H is a precision marking divider designed for transferring measurements and scribing arcs in metalworking and general workshop applications. Carbide points for long service life Rivet hinge for stable, repeatable adjustment Hardened steel body for high rigidity 400 mm span for broad marking range Precise, durable marking for repeatable workflows The divider combines a hardened steel shaft with carbide points, delivering a tool that resists wear while maintaining sharp contact with workpieces. The rivet hinge provides a stable pivot that minimises play over repeated adjustments, which translates into repeatable marking and reduced rework. For layout tasks where conformity and traceability matter, this construction reduces measurement drift and keeps setup times short, supporting efficient production cycles. Confident handling and ergonomic control At 400 mm span the instrument balances reach and manoeuvrability: enough extension for larger components while remaining light at 0.44 kg for single‑handed positioning. The geometry of the legs is optimised for rigidity, so transfer lines stay true even when scribing around contours. The carbide tips ensure crisp marking on hardened or coated surfaces, offering a reliable alternative to soft‑point scribes where longevity and consistent line width are required. Built to industry standards and workshop realities Manufactured in accordance with DIN 6486, the divider is suitable for daily use in metal fabrication, prototyping and toolroom tasks. The robust materials and finish mean the instrument withstands routine abrasion and knocks on the bench without losing alignment. The tool is ideal for layout on steel and similar metals, where the combination of hardened steel and carbide tips provides longevity and low maintenance compared with softer alternatives. Practical use cases and maintenance guidance This divider is intended for marking, transferring measurements and scribing arcs on components and jigs. Simple cleaning and occasional lubrication of the hinge preserve the precise motion of the rivet joint; carbide points can be honed carefully if the line quality degrades. Because of its construction, the instrument excels in tasks requiring durable, high‑contrast scribe lines and benefits workshops seeking a low‑service, long‑life marking tool. Request personalised advice or a formal quotation from Metav Werkzeuge for the Metav IndustryLine M214.205.H divider — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical data SKU: M214.205.H GTIN: 4054469159270 ECLASS: 21170305 Tariff code: 90172039 Facts Length: 400 mm Weight: 0.44 kg Standard: DIN 6486 Features Material: hardened steel Tips: carbide (hardmetal) Hinge: rivet hinge (stable adjustment) Category: Divider / compass FAQ What materials is this divider suitable for? The M214.205.H divider is built from hardened steel with carbide tips, making it suitable for marking on steel and comparable metals where durable, repeatable scribe lines are required. How does the rivet hinge affect accuracy? A rivet hinge provides a stable pivot that minimises play; this design in the M214.205.H ensures repeatable adjustment and consistent marking over many cycles. Can the carbide points be re‑sharpened? Yes, the carbide tips on the divider can be carefully honed to restore line quality; use fine diamond stones and avoid excessive material removal. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Divider Compass With Riveted Hinge, Hardened And Ground Points - TECWERK
Take advantage of the 400 mm reach combined with a rivet hinge and hardened, ground points for reliable, repeatable marking and scribing in the workshop; order the tool directly via Metav Werkzeuge or contact their consultants for application advice. TECWERK divider L.400 mm – rivet hinge, hardened points A TECWERK divider designed for precise layout and scribing tasks in metalworking and general workshop applications. 400 mm span for extended marking Rivet hinge for stable adjustment Hardened and ground points for lasting accuracy Robust reach for large layouts The long 400 mm span provides a clear advantage for larger pattern transfers and scribing over extended distances, reducing the need for repositioning and minimising cumulative error. Constructed with a stable profile and a square leg, the instrument maintains alignment during use, which supports consistent centre-to-centre measurements. This extended reach is particularly useful in fabrication and sheet-metal work where single-pass marking speeds up workflow and reduces rework. Precision where it matters Accuracy stems from the combination of a secure hinge mechanism and sharp, durable points. The rivet hinge ensures a firm, low-play pivot while retaining smooth adjustment; this delivers repeatable settings for series work. The tips are hardened and ground, a finish that preserves point geometry under frequent contact with tougher materials and therefore prolongs service life. For users with limited metrology experience, these features lower the risk of drift and make achievable the kind of precision normally expected from specialist tools. Practical design for everyday workshop use Ergonomics and robustness make the tool suitable for everyday use on the bench. The configuration with a square leg provides a comfortable grip and prevents unwanted rotation during scribing, helping secure straight lines and exact arcs. The construction favours low maintenance: the solid joint and hardened tips mean fewer adjustments and less downtime for repairs. As a compact, dependable instrument, the divider fits routines in fabrication, maintenance and quality-control environments without complex calibration procedures. Contact Metav Werkzeuge in Emmerich for tailored advice on the TECWERK 400 mm divider — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000858904NW UID: 2000858904NW Brand: TECWERK Product type: Divider Length: 400 mm Packaging unit: 1 Facts 400 mm span Packaging unit 1 Special features Rivet hinge Square leg Hardened and ground points Suitable for workshop marking and scribing FAQ How does the rivet hinge affect adjustment precision? The rivet hinge provides a secure pivot with minimal play, so the divider keeps its set position and allows repeatable measurements with the TECWERK divider L.400 mm. Can the points be re-sharpened or replaced? The hardened and ground points are designed for long life; they can be re-profiled carefully if worn, but replacement depends on workshop capability and the selected maintenance approach. Which tasks is this divider best suited for? The instrument is intended for layout, scribing and transferring measurements on sheet metal, fabrication and general workshop applications where a 400 mm reach is advantageous. Is the divider suitable for heavy-duty industrial use? With its rivet hinge and hardened tips, the divider offers robustness for frequent workshop use; however, compatibility with specific industrial environments should be assessed against local requirements. What packaging is included with the product? The item is supplied as a single unit packaged per the stated packaging information (packaging unit 1). Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
400mm Dividers With Adjustable Hinge Hardened And Ground Points, Four-Sided Leg - TECWERK
Take advantage of the combination of a 400 mm measuring span, an adjustable bow and hardened, ground points for consistent, efficient layout work; order the point divider directly via Metav Werkzeuge or ask our consultants if needed Point Divider L.400mm with Adjustable Bow (TECWERK) — 400 mm span, hardened tips The Point Divider L.400mm with Adjustable Bow is a workshop divider designed for accurate scribing and layout tasks across a long span 400 mm measuring span for large scribing Adjustable bow for fine spacing control Rivet hinge with square leg construction Hardened and ground points for durability Reliable accuracy for long-span layout work The device offers a 400 mm effective span that makes repeating measurements and transferring distances straightforward on large workpieces. Thanks to the robust square legs, the instrument resists lateral flexing and provides a stable reference line during marking operations, which increases precision and reduces rework. The geometry is deliberately simple: each movement focuses on repeatable positioning rather than complex mechanisms, allowing faster setup for repetitive layout tasks in metalworking and joinery. The compact, familiar design supports reliable handling on benches and on-site layouts. Fine adjustment and long-lasting marking performance An integrated adjustable bow enables controlled opening and closing of the legs for incremental spacing and fine adjustments without losing alignment. The tips are hardened and ground, which preserves a sharp contact point, reduces wear and maintains consistent mark depth over time. The rivet hinge offers a smooth pivot action with minimal play, so adjustments remain accurate across repeated operations. These mechanical choices translate into less downtime for recalibration and fewer interruptions for maintenance, improving throughput in everyday workshop use. Built for workshop reliability and straightforward upkeep Durability and low maintenance are central to the design: hardened tips and the sturdy hinge geometry keep the tool serviceable for extended periods under normal workshop conditions. The plain, mechanical construction also makes the instrument straightforward to clean and inspect, while any minor servicing—such as tip reshaping—can be carried out quickly without special equipment. Supplied as a single unit, the divider fits neatly into existing tool kits and measurement sets, offering a pragmatic balance between robust mechanics and practical usability. Contact Metav Werkzeuge today for purchase details or technical advice on TECWERK dividers and to ensure the right specification for the intended application Technical data Article number: 2000858916NW UID: 2000858916NW Designation: Spitzzirkel L.400mm m.Stellbogen TECWERK Facts Length: 400 mm Packaging unit: 1 Special features With rivet hinge and square legs Tips hardened and ground With adjustable bow FAQ What is the maximum span of this divider? The divider has a maximum span of 400 mm as stated for the Point Divider L.400mm with Adjustable Bow (TECWERK) Are the divider points suitable for repeated workshop use? Yes; the points are hardened and ground to resist wear and to maintain sharpness during repeated marking tasks How is fine spacing adjusted on this divider? Fine spacing is achieved via the adjustable bow, which allows incremental control of the leg opening for precise measurements Is the hinge serviceable if it becomes loose over time? The rivet hinge is designed for durability; modest play can usually be corrected by tightening or replacing the rivet if necessary Which workshop tasks are this divider best suited to? The instrument is ideal for scribing, transferring distances and layout work on larger components where a 400 mm span is required Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
400mm External Divider With Riveted Hinge, Steel, DIN 6484 - Metav IndustryLine
Take advantage of the combination of 400 mm reach, robust steel construction and DIN 6484 conformity for consistent large‑format scribing and layout work. Order or enquire through Metav Werkzeuge for a reliable supply and specialist advice. Outside scribing compass M214.235 — 400 mm rivet‑hinged steel layout compass (Metav IndustryLine) The Outside scribing compass M214.235 is a rivet‑hinged layout instrument designed for precise external marking and circle scribing on medium‑sized components in workshop and production environments. 400 mm reach for large layouts Rivet hinge for secure joint play Steel construction for durable use Conforms to DIN 6484 standards Extended reach for larger components that stays stiff The 400 mm reach places this instrument in the medium‑range class (300–500 mm), which is ideal for layout tasks that require both reach and controllable stiffness. The longer legs reduce the need for repositioning when transferring centre points or scribing radii on flanges, housings and panels, while the rivet connection maintains a consistent pivot action. This combination streamlines marking operations and reduces rework by ensuring repeatable geometry across multiple parts. Stable joint and materials that support repeatability A rivet‑hinged joint provides a secure, low‑play articulation that resists loosening during routine use; this helps preserve the original setting and improves repeatability between operations. Constructed from steel, the instrument balances resistance to wear with the rigour required for daily workshop handling. Compliance with DIN 6484 documents the product’s suitability for industrial marking standards and supports a predictable quality baseline for procurement and inspection processes. Designed to increase marking efficiency and clarity The layout compass facilitates clear, visible scribed lines for machining and assembly references, reducing interpretation time at the machine bench. The tool’s geometry and robust materials enable steady handling during single‑operator tasks and when working on multiple identical components. Marking workflows benefit from fewer measurement transfers and a lower risk of cumulative error, which translates directly into time saved and fewer scrapped parts. For a detailed suitability check or to reserve stock of the Metav IndustryLine M214.235, contact Metav Werkzeuge for specialist advice and procurement assistance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M214.235 GTIN: 4054469107486 ECLASS: 21170325 ETIM: EC000029 Tariff code: 90172039 Standard: DIN 6484 Facts Reach / length: 400 mm Category: Zirkel (layout compass) Material: Steel SKU: M214.235 Special features Rivet hinge (fixed pivot joint) Suitable for external scribing and layout transfer Robust steel legs for workshop use FAQ What measurement range does this compass cover? The Metav IndustryLine M214.235 provides a reach of 400 mm, placing it in the medium range suitable for larger layout tasks without sacrificing handling stability. Is the joint adjustable or secured? The instrument uses a rivet hinge, which offers a secure pivot with minimal play to maintain settings during repeated marking operations. What material is the compass made from and why does that matter? The legs are manufactured from steel, chosen for durability and wear resistance so the compass retains accuracy under regular workshop use. Can this compass be used for both marking and layout on metal components? Yes, the M214.235 is intended for external scribing and layout work on metal components where a stable, repeatable marking tool is required. Does the product comply with any recognised standards? The tool conforms to DIN 6484, reflecting its suitability for standardised industrial marking applications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
400mm Point Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of a robust layout tool that combines hardened steel construction with a riveted hinge and a 400 mm span for reliable marking and scribing across larger components; this ensures consistent geometry and long service life. Order the Pointed divider directly via Metav Werkzeuge or contact our consultants for specification advice. Pointed divider M214.205 — 400 mm, hardened steel, riveted hinge (Metav IndustryLine) The Pointed divider M214.205 is a workshop-grade scribing and layout instrument designed for transferring measurements and marking radii on medium to large components in metalworking and general fabrication. Hardened steel construction for durability and edge retention Riveted hinge for sustained alignment and stability 400 mm span for broader layout capability Conforms to DIN 6486 for standardised geometry Built for consistent layout and repeatable results The robust construction of this scribing tool ensures reliable repeatability when transferring dimensions or laying out circles and arcs. The hardened steel legs resist wear and maintain a sharp point geometry, which reduces the need for frequent re‑grinding and helps preserve consistent contact with the workpiece. The riveted hinge provides stable leg alignment under normal working loads, limiting play that would otherwise introduce error during marking operations. For workshop environments where reproducibility and speed are essential, this configuration reduces rework and supports efficient process flow. Practical reach for medium-format workpieces With a span of 400 mm, the instrument addresses layout tasks that exceed the reach of pocket-sized dividers while remaining manageable for single-operator use. The extended range is especially useful when marking larger plates, templates or mounting patterns, removing the need for repetitive transfers and improvised fixtures. The tool’s geometry and length strike a balance between reach and stiffness, enabling accurate scribing across the full span without excessive flex, which benefits assembly preparation and quality control in machine shops and fabrication cells. Simple handling with enduring accuracy Ergonomics and maintenance are deliberately straightforward: the plain, sturdy form factor facilitates confident hand control during scribing and ensures quick adjustments on the bench. The DIN 6486 conformity denotes a recognised standard for divider geometry, giving procurement and workshop supervisors a verifiable basis for tool selection and integration into existing measuring routines. Minimal maintenance—occasional point dressing and hinge inspection—keeps the instrument serviceable for long periods, supporting predictable shop schedules and reducing downtime. Suitable applications and how it complements shop processes This divider functions as a primary layout instrument for marking radii, transferring hole centres and setting out arcs on sheet, plate and machined components. Its durable materials and simple mechanism make it a dependable companion at the layout bench, in jigs and fixtures preparation, and where a reliable manual reference tool is preferred to avoid overreliance on powered equipment. Used alongside calipers and protractors, the device contributes to a consistent measurement chain that underpins product quality. For tailored advice or to secure the Metav IndustryLine Pointed divider M214.205 for your workshop, contact Metav Werkzeuge in Emmerich via info@metav-werkzeuge.com or call +49 2822 7131930 — our consultants will advise on delivery and suitable accessories. Technical data SKU: M214.205 GTIN: 4054469107233 ECLASS: 21170305 Customs tariff number: 90172039 Standard: DIN 6486 Facts Length: 400 mm Category: Divider / scribing tool Weight: see product labelling for declared value Special features Material: hardened steel Riveted hinge for long-term alignment Workshop and layout applications Suitable for marking radii and transferring centres FAQ What material is the divider made from? The divider is manufactured from hardened steel, which provides wear resistance and long service life for scribing tasks. Is the hinge fixed or adjustable? The riveted hinge gives stable, lasting alignment while allowing controlled manual adjustment of the legs for layout work. What is the usable span of the tool? The instrument has a span of 400 mm, making it suitable for medium-format layout and marking operations. Does the divider comply with an industry standard? Yes, the tool conforms to DIN 6486, which standardises divider geometry for consistent performance. Which workshop tasks is this divider best suited to? It is intended for marking radii, transferring hole centres and scribing arcs on plates, templates and machined parts in fabrication and machine shops. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Bow Point Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the combination of a long 500 mm reach, hardened steel construction and a stable rivet hinge for reproducible layout work; order the instrument directly via Metav Werkzeuge or consult our advisors for application guidance. Bow-point divider M214.216 — 500 mm hardened steel divider (Metav IndustryLine) A Bow-point divider M214.216 designed for accurate centre-to-centre marking, step transfers and template work across metalworking and fabrication environments. 500 mm measuring range for large templates Hardened steel for long-term wear resistance Rivet hinge ensures stable, repeatable settings Compliant with DIN 6486 workshop standard Dependable layout over extended distances The extended 500 mm span gives sufficient reach to mark large components and patterns without resorting to improvised methods, reducing handling time and layout errors. Constructed from hardened steel, the instrument retains its geometry under routine workshop stresses, which contributes to consistent repeatability across multiple parts. The relatively solid mass (approx. 0.6 kg) helps to stabilise the tool during transfer marking, improving line fidelity on sheet, plate and template surfaces. Robust hinge and secure adjustments for repeatable results A rivet-style hinge provides a straightforward, low-maintenance pivot that resists loosening in a workshop environment and preserves the chosen setting during repeated use. This stable articulation, combined with the instrument's bow-point geometry, makes the divider particularly suitable for repetitive layout tasks where identical spacing or concentric marking is required. The tool adheres to DIN 6486, reassuring workshop managers that the design meets established drawing and dimensional norms. Practical handling that suits everyday fabrication The divider balances reach with manoeuvrability: long enough for pattern work, yet compact for handheld operation and transport between workstations. The hardened steel legs withstand typical knocks and abrasion, so routine sharpening or maintenance intervals remain predictable. For users who value straightforward, mechanical tools, the instrument delivers a low-complexity solution that reduces set‑up time and dependence on powered layout aids. Applications and workshop advantages Ideal for metal fabrication, pattern making and general marking-out duties, the instrument excels where robust, repeatable spacing and centre-to-centre measurements are needed. The bow-point form allows precise scribing and centre-finding on plates, pipes and assemblies, while the plain mechanical construction minimises failure modes and supports long service life. Its compliance with familiar standards makes it an easy addition to workshop tooling schedules and inspection routines. For dependable long-range layout and durable workshop performance, request the Metav IndustryLine bow-point divider via Metav Werkzeuge or contact our Emmerich consultants for tailored application advice. Technical Data Article number: M214.216 GTIN: 4054469107318 SKU: M214.216 Facts Length: 500 mm Weight: 0.6 kg Tariff number: 90172039 Standard: DIN 6486 Special features Material: Hardened steel Hinge type: Rivet hinge Style: Bow-point divider Category: Dividers (Zirkel) FAQ What materials can be marked with this divider? The bow-point divider M214.216 is made of hardened steel and is suitable for marking on common workshop materials such as steel and non-ferrous metals for layout work. Is the hinge adjustable or permanently riveted? The instrument uses a rivet hinge designed for stable, repeatable settings rather than frequent adjustment, which favours consistent transfer marking in production tasks. Does this divider comply with any standards? Yes, the instrument is specified to DIN 6486, aligning its form and function with recognised workshop layout norms. How does the 500 mm reach benefit workshop use? A 500 mm span allows marking and step transfers on larger components and templates without improvised extensions, improving efficiency and reducing error opportunities. What maintenance does the divider require? Routine care is limited to keeping the points sharp and the hinge free of heavy debris; the hardened steel construction minimises wear and supports long service intervals. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Divider Caliper With Adjustable Joint Hardened And Ground Points, With Square Legs - TECWERK
Precision scribing and robust adjustment are combined in this 500 mm divider: the solid rivet hinge and square legs deliver stable alignment, while the hardened and ground tips ensure long-lasting accuracy for workshop layout tasks. Order this practical measuring tool directly via Metav Werkzeuge or consult the team for technical clarification. Spitzzirkel L.500mm m.Stellbogen – 500 mm divider with rivet hinge and hardened tips (TECWERK) The Spitzzirkel L.500mm m.Stellbogen is a 500 mm workshop divider designed for precise scribing and transferring measurements, suitable for general layout and marking tasks in industrial and craft environments. 500 mm reach for large layouts Rivet hinge for secure adjustment Square legs for stable alignment Hardened and ground scribing points Precise layout over long spans for reliable production The long 500 mm span of this divider enables accurate marking across larger workpieces, reducing the need for repeated repositioning and minimising cumulative error. As a precision layout instrument, the tool is intended to provide repeatable measurements, which supports tight tolerances in serial tasks. The geometry of the legs preserves the scribed path, so layout quality is maintained across multiple operations without complex setup. Secure adjustment and stable alignment for consistent results Adjustment is provided by a rivet hinge, which secures the leg position while allowing controlled movement; this design reduces play common to loose fastenings. The square legs promote consistent limb orientation, improving contact with flat surfaces and assisting in maintaining perpendicularity during transfer work. Together these features deliver operational stability and reduce rework, a clear efficiency advantage in workshop workflows. Tips engineered to withstand workshop wear and maintain accuracy The scribing points are hardened and ground, a combination that improves wear resistance and preserves point geometry under repeated use. Hardened tips retain sharpness longer, so layout lines remain narrow and well defined; the ground finish supports dependable contact behaviour. Simple sharpening and alignment checks, performed at regular intervals, prolong service life and keep measurement drift to a minimum. Designed for everyday workshop integration and straightforward handling Built for practical use, the divider’s execution with an adjustable bow facilitates fine setting without complex tools, while its construction suits a wide range of marking tasks in metalworking and joinery contexts. The instrument’s straightforward functionality supports efficient workflow integration, making it a dependable choice where durability and uncomplicated handling are priorities for production teams and skilled tradespeople. For professional layout tasks select the TECWERK divider from Metav Werkzeuge; contact Metav Werkzeuge for technical advice or to arrange supply directly from Emmerich. Technical data SKU: 2000858917NW UID: 2000858917NW Product: Spitzzirkel L.500mm m.Stellbogen TECWERK Manufacturer: TECWERK Packaging unit: 1 Execution: with adjustable bow Specifications Length: 500 mm Packaging unit: 1 Special features Rivet hinge Square legs Tips hardened and ground FAQ What is the working length of this divider? The working length is 500 mm, which makes the Spitzzirkel L.500mm m.Stellbogen suitable for larger layout and marking tasks. How is the leg position secured during marking? Legs are secured by a rivet hinge, which provides firm adjustment and reduces play for consistent positioning while using the TECWERK divider. Are the scribing points durable for frequent use? Yes, the scribing tips are hardened and ground, giving the divider enhanced wear resistance and sustained marking precision. Is the divider suitable for use in both metalworking and woodworking? The tool’s robust design and adjustable setting make the divider appropriate for general workshop layout tasks across metalworking and carpentry applications. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
500mm Divider Compass With Riveted Hinge, Hardened And Ground Points - TECWERK
Take advantage of the combination of a long 500 mm span, a riveted hinge for lasting alignment and hardened, ground points for consistent marking — ideal for precise layout work in a busy workshop. Order the pointed divider directly via Metav Werkzeuge or consult our specialists for tailored advice. TECWERK pointed divider – 500 mm, riveted hinge, square legs A TECWERK pointed divider for precise scribing and layout of large radii in workshop and trade applications. 500 mm span for large radii and arcs Riveted hinge for stable, play-free alignment Square legs for secure, repeatable positioning Hardened and ground points for durable precision Reliable accuracy for larger layouts This long-span scribing tool provides a 500 mm working span that simplifies the marking of large circles and arcs. The long legs reduce the need for multiple re-measurements, so layout tasks can be completed faster and with fewer setup steps — a direct efficiency gain on repetitive jobs. The combination of hardened and ground points with the robust leg geometry produces a fine, consistent scribe line that improves transfer accuracy and reduces downstream rework. Built for day-to-day workshop durability A riveted hinge gives the instrument a stable pivot without the lateral play that compromises repeatability. The riveted hinge and square legs are designed to withstand workshop handling and to keep alignment intact over time, which lowers total cost of ownership through longer service life. Maintenance is straightforward: keep the points clean and protected and the hinge will preserve its alignment, ensuring consistent performance across long production runs. Practical handling and application guidance The divider is suited for marking, transferring measurements and laying out circles on a range of materials commonly found in a workshop environment. Its geometry allows for steady contact and improved control during scribing, while the square-section legs help maintain a predictable leg orientation when measuring or transferring dimensions. For best results, apply light, steady pressure during marking and check the alignment of the hinge before critical transfers to ensure maximum precision. For precision layout tasks that demand a long span and durable alignment, contact Metav Werkzeuge to arrange supply of the TECWERK pointed divider or to discuss technical suitability for your workflows — Metav Werkzeuge provides expert advice and direct delivery from Emmerich. Technical data Article number: 2000858905NW SKU / UID: 2000858905NW Label: Spitzzirkel L.500mm m.Nietscharnier TECWERK Pack unit: 1 Facts Length: 500 mm Special features Riveted hinge Square legs (Vierkantschenkel) Points hardened and ground (Spitzen gehärtet und geschliffen) FAQ What is the working span of this divider? The TECWERK pointed divider offers a 500 mm working span, suitable for marking large circles and arcs. How does the riveted hinge affect performance? The riveted hinge on the TECWERK pointed divider provides stable, play-free pivoting that maintains repeatable alignment during repeated layout operations. Are the scribing points durable for frequent use? Yes — the points are hardened and ground, giving the divider long-lasting edge retention and consistent scribe quality under normal workshop use. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
500mm Internal Gauge With Rivet Hinge, Steel, DIN 6482 - Metav IndustryLine
Combining a robust steel frame, a 500 mm measuring range and a rivet hinge delivers stable, reproducible internal measurements for medium‑sized assemblies; order the Internal Caliper M214.226 directly via Metav Werkzeuge or consult our advisers for application guidance. Internal Caliper M214.226 — 500 mm rivet hinge | Metav IndustryLine An Internal Caliper M214.226 designed for reliable internal measurement of medium‑sized bores and components in metalworking and fixture fabrication. 500 mm length for larger internal diameters Robust steel construction for long service life Rivet hinge for consistent joint stability Complies with DIN 6482 measurement standards Consistent accuracy and stability for medium‑range internal measurement This instrument is a medium‑range caliper with a 500 mm span, offering the best compromise between reach and stiffness for workshop and fixture work. The steel construction ensures dimensional stability under regular use, while the rivet hinge provides a secure pivot that reduces play over time and supports reproducible measurements. Conformance with DIN 6482 signals that geometry and basic performance characteristics meet recognised mechanical standards for compasses and dividers, which simplifies integration into routine quality checks and marking workflows. Faster inspection cycles through practical handling and clear benefits Aiming at operational efficiency, the design supports confident internal checks on housings, bore seats and large assemblies with minimal repositioning. The instrument’s geometry is tuned for ease of guidance and balanced handling, making it suited to single‑operator tasks where speed and repeatability matter. By combining reach and rigidity, this caliper reduces the need for time‑consuming fixtures or multiple tools, thereby shortening inspection loops and lowering the risk of rework in production. Durable design and standards that protect measurement integrity Manufactured in steel and following the DIN 6482 specification, the tool is intended for demanding workshop conditions where robustness counts. The rivet hinge resists loosening and preserves the calibrated geometry of the jaws, which contributes to long‑term reliability. For engineering teams that require straightforward mechanical tools for internal measurement, the construction and conformance to standardised norms deliver a trustworthy basis for everyday quality assurance tasks. Contact Metav Werkzeuge in Emmerich for ordering or technical advice on the 500 mm Internal Caliper M214.226 from Metav IndustryLine; our consultants can advise on suitability for specific metalworking and fixture applications. Technical data Article number: M214.226 GTIN: 4054469107400 ECLASS: 21170336 ETIM: EC000029 Facts Length: 500 mm Customs tariff number: 90172039 Special features Material: Steel Rivet hinge Compliance: DIN 6482 Category: Dividers / compasses Brand: Metav IndustryLine FAQ What measurement range does the Internal Caliper M214.226 cover? The Internal Caliper M214.226 provides a 500 mm span, classifying it as a medium‑range instrument suitable for larger internal diameters in workshop and production settings. Is the tool supplied with an accredited calibration certificate? The M214.226 is supplied as a standard workshop instrument; there is no ISO 17025 calibration certificate included unless explicitly specified. Which materials and applications suit this caliper? The caliper’s steel construction and robust hinge make it appropriate for metalworking tasks such as inspecting housings, bore seats and fixture components where medium‑range internal measurement is required. What does compliance with DIN 6482 mean for everyday use? Compliance with DIN 6482 indicates that the instrument follows recognised mechanical specifications for compasses and dividers, ensuring predictable geometry and behaviour for marking and measurement tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Outside Caliper With Riveted Hinge, Steel, DIN 6484 - Metav IndustryLine
Combining a 500 mm span, steel construction and a riveted hinge, this outside scriber divider delivers reliable, repeatable large‑format marking for workshop and fabrication tasks. Order the outside scriber divider directly via Metav Werkzeuge or ask our consultants if needed. Outside Scriber Divider M214.236 — 500 mm steel divider with riveted hinge (Metav IndustryLine) The Outside Scriber Divider M214.236 is a workshop‑grade divider designed for external scribing and layout work in metalworking and fabrication, providing a sturdy tool for clear, repeatable markings on large components 500 mm span for large layouts Robust steel construction Riveted hinge for secure joint Conforms to DIN 6484 Built for repeatable large‑format layout The divider is engineered around a 500 mm span that enables layout across sizeable workpieces without sacrificing control. The steel construction gives a stable feel and resists flexing during marking, while the riveted hinge forms a robust joint that maintains alignment even under frequent use. These attributes lead to repeatable results on plates, flanges and assemblies, reducing rework and downtime in production environments. Practical handling and workshop efficiency At an overall weight of 0.4 kg, the instrument balances reach with manoeuvrability so a single operator can set and transfer scribed lines comfortably. The external scribing tip and pivot geometry are optimised for reliable contact on curved and flat surfaces, speeding layout tasks without complex setup. The compact profile and straightforward adjustment support fast work cycles and clear visual orientation during marking. Standards, suitability and upkeep Built to DIN 6484, the divider meets recognised workshop standards for a measuring and marking tool of this type and is categorised as a professional divider for industrial applications. The simple steel finish is compatible with standard workshop practice for maintenance; occasional cleaning and light lubrication at the hinge preserve accuracy and extend service life. The M214.236 model is particularly suited to metalworking and fabrication tasks where robust, repeatable scribing is required. For dependable large‑format layout choose the Metav IndustryLine divider and contact Metav Werkzeuge in Emmerich for purchase or tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: M214.236 GTIN: 4054469107493 Category: Divider (Zirkel) Standard: DIN 6484 Tariff code: 90172039 Numbers Length: 500 mm Weight: 0.4 kg Special features Material: Steel Riveted hinge Suitable for external scribing Category path: Messgeräte › Zirkel FAQ Is this divider suitable for marking large workpieces? Yes. The divider’s 500 mm span and sturdy construction make the Outside Scriber Divider M214.236 suitable for layout and marking across large plates, flanges and assemblies. What material is the instrument made from? The instrument is manufactured from steel, which provides rigidity and resistance to flexing during scribing operations on metal components. How durable is the hinge mechanism? The riveted hinge offers a secure, low‑play joint that preserves alignment under regular workshop use; routine light lubrication will maintain smooth operation of the M214.236. Does the divider conform to any standards? Yes. The divider is produced to meet DIN 6484, ensuring it fulfils common workshop requirements for a professional marking instrument. Is the divider appropriate for curved surfaces? The external scribing tip and pivot geometry are designed to maintain contact on both flat and curved surfaces, allowing clear transfer of scribed lines during fabrication tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Pointed Divider With Riveted Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the combination of hardened steel construction, a 500 mm measuring range and a robust rivet hinge for consistent layout and scribing results; order the tool directly via Metav Werkzeuge or consult the sales team for procurement advice. Pointed Divider M214.206 — 500 mm pointed divider with rivet hinge (Metav IndustryLine) The Pointed Divider M214.206 is a 500 mm precision layout and scribing instrument designed for marking, step measuring and transferring distances in metalworking and general workshop applications Hardened steel construction, high stiffness Rivet hinge for reliable leg alignment 500 mm measuring range for large components Conforms to DIN 6486 for workshop use Precision and longevity for routine layout tasks The pair of dividers is made from hardened steel, which increases rigidity and reduces wear on the legs, delivering repeatable marks over prolonged use. With a 500 mm span the tool covers larger layout tasks without compromising control; the long legs remain stable under normal hand pressure, enabling accurate centre-to-centre and step markings. The rivet hinge is engineered to maintain a consistent leg angle, which helps to avoid cumulative errors during multiple scribing operations, so the instrument performs reliably across production runs. Functional design that supports efficient marking The rivet hinge provides secure alignment and controlled leg movement, allowing fine adjustments that keep both legs parallel when required. The pointed tips are suited to scribing into metal and other hard surfaces, and the geometry of the legs supports both centre punching and transferring measurements between workpieces. Conformance with DIN 6486 indicates the tool meets recognised workshop standards for layout instruments, simplifying specification checks for workshop managers and quality departments. The construction focuses on low maintenance while delivering high functional availability on the shop floor. Integration into workshop processes and procurement As a traditional mechanical layout instrument, the divider requires no power or calibration equipment and is easily integrated into existing marking procedures. The simple mechanical design makes inspection and basic servicing straightforward, while the durable material choice reduces replacement frequency. For purchasing and stocking, the tool’s clear specification and standardisation under DIN 6486 support consistent procurement and quality assurance practices. Metav IndustryLine supplies the instrument ready for immediate use in industrial and craft settings. Contact Metav Werkzeuge today to arrange supply of the Pointed Divider from Metav IndustryLine or to discuss specifications for production use. Technical Data SKU: M214.206 GTIN: 4054469107240 ECLASS: 21170305 Tariff number: 90172039 Facts Length: 500 mm Standard: DIN 6486 Special features Hardened steel Rivet hinge (nietscharnier) Category: Divider / layout instrument FAQ What is the measuring range of the divider? The divider offers a 500 mm maximum span suitable for larger layout tasks and transferring distances on medium to large components. Which material is used for the legs? Legs are manufactured from hardened steel, chosen for stiffness and wear resistance to ensure long service life under workshop conditions. How does the rivet hinge affect accuracy? The rivet hinge maintains stable leg alignment during marking and measuring, reducing angular play and ensuring repeatable results over repeated use. Is the tool suitable for metal scribing? Yes, the pointed tips and hardened-steel legs are intended for scribing and layout on metal and comparable hard materials. Does the product comply with any standards? The instrument conforms to DIN 6486, aligning with commonly expected workshop standards for layout tools. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Rod Caliper With Carbide Tips, Flat Square Beam, Vernier 0.05mm Accuracy - Metav IndustryLine
Take advantage of the combination of robust construction, replaceable carbide tips and precise fine adjustment for reproducible measurements in jig and mould making. The instrument’s stainless steel build and 500 mm range deliver a reliable balance of reach and stiffness; order the 500 mm rod caliper with carbide tips directly via Metav Werkzeuge or ask our consultants if needed. 500 mm rod caliper with carbide tips — vernier rod caliper by Metav IndustryLine A 500 mm rod caliper with carbide tips designed for medium‑range workshop and fixture measurements, providing steady guidance and repeatable contact on larger assemblies. Robust stainless steel construction Replaceable carbide tips for long life Vernier scale with matt‑chrome graduations Fine adjustment for controlled contact Reliable measurement for medium‑sized components Built for the demands of jig, fixture and mould fabrication, this caliper delivers a measured compromise between reach and rigidity. The 500 mm measurement span places the instrument in the medium range for calipers, suitable where extended reach is required without excessive flex. Constructed from stainless steel with a vernier scale, the tool offers consistent stiffness across its length so that single‑handed measurements remain reproducible and suitable for routine workshop quality checks. Durable carbide tips and controlled contact The inclusion of replaceable carbide tips extends service life where repeated contact or abrasive edges are present; carbide resists wear far better than standard steel. The integrated fine adjustment mechanism permits gradual closing pressure, reducing operator‑induced variation during measurement. Together these features support a lower process variation and longer intervals between maintenance or tip replacement. Clear reading and vernier precision The vernier division with matt‑chrome graduations is calibrated for practical readability in workshop light. With a typical vernier resolution of 0.05 mm, the instrument fits industrial tolerances for general metalworking and machine‑shop tasks. The scale layout and contrast aid rapid interpretation, while the mechanical nonius avoids electronic dependency for environments where robustness and simplicity are priorities. Practical handling and workshop integration At a measured mass of 4 kg, the instrument offers stable handling when measuring larger castings or assemblies; the weight contributes to stable contact yet remains manageable for two‑person handling where necessary. The design emphasises serviceability: tips are user‑replaceable and the mechanism is straightforward to maintain. For process implementation, this caliper integrates easily into inspection benches or jigs as a reliable analogue measuring reference. Contact Metav Werkzeuge for tailored advice on integrating the 500 mm rod caliper with carbide tips into production and to arrange supply from Emmerich Technical Data Article number: M201.174 GTIN: 4054469100883 Tariff number: 90173000 ECLASS: 21170344 Weight: 4 kg Core numerical data Measurement range: 0–500 mm Reading/resolution: 0.05 mm Tip dimension: 60 SKU: M201.174 Special features Stainless steel construction Vernier (nonius) scale with matt‑chrome graduations Replaceable carbide (hardmetal) tips Fine adjustment mechanism Suitable for workshop and fixture measurement FAQ How accurate is the reading on this caliper? The vernier layout provides a practical 0.05 mm reading resolution, matching typical industrial tolerances for mechanical workshop work with the M201.174 rod caliper. Are the carbide tips replaceable and economical to service? Yes, the tool features replaceable carbide tips, allowing targeted renewal of wear parts without replacing the entire instrument; this supports lower life‑cycle costs for the Metav IndustryLine caliper. Is this instrument suitable for measuring larger assemblies? The 500 mm measurement range positions the caliper in the medium category, making it appropriate for larger components, fixture parts and many mould elements where repeatable stiffness and reach are required. Does the caliper require electronic power or special maintenance? The caliper is an analogue vernier instrument with mechanical fine adjustment and does not require power; routine maintenance is limited to tip inspection and lubrication of the slide. Which workshop applications match the design of this caliper? Typical uses include machine‑shop inspection, jig and fixture setup and mould component measurement, where robust contact points and stable guidance are priorities for repeatable results. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
500mm Rod Divider With Carbide Marking Tips Ø25x100 - Metav IndustryLine
Beam compass combines stainless steel construction, carbide scribing tips and a 0–500 mm working range for reliable workshop layout and marking. Order the tool directly via Metav Werkzeuge or consult our advisors for application support and delivery options. Bar compass M201.274 (Beam compass) — 0–500 mm, carbide-tipped Bar compass M201.274 is a workshop-grade beam compass for precise scribing and layout of medium-sized components, designed for machine shops, toolrooms and general metalworking. Stainless steel construction for longevity Carbide scribing tips for crisp markings 0–500 mm range for medium workshop tasks Compatible with calipers up to 1000 mm diameter Durable construction for consistent layout work The beam compass is manufactured from stainless steel, giving a stable and wear-resistant beam that keeps its geometry under frequent use. The solid design reduces flexing during longer scribing strokes and maintains alignment over time, which in practice lowers the risk of rework. With a mass of 2 kg and a rod diameter of 19 mm, the unit balances handable weight with sufficient stiffness for repeatable marking on sheet, plate and assemblies. Carbide points for precise and lasting marks Equipped with carbide scribing tips, the divider produces consistently visible layout lines on hard and abrasive surfaces. Carbide tips retain a sharp edge significantly longer than plain steel, so the marking quality remains constant over extended production runs. The measuring tips are sized Ø25 × 100 mm, optimised for stability when engaging the workpiece; this ensures crisp scribe traces even on thicker or textured materials, supporting accurate downstream machining or drilling operations. Practical range and workshop compatibility Classified in the medium range for calipers and beam tools, the compass covers 0–500 mm, which is the typical span needed in machine and metal workshops for fixtures, housings and medium-sized components. The design is also specified as compatible with calipers for diameters up to 1000 mm, allowing integration into existing layout workflows and simplifying transfers between measuring and marking operations. The analogue concept removes dependence on batteries or electronics, enabling immediate use at the bench or on the shop floor. Straightforward handling that supports productivity Analogue adjustment and a plain but effective locking mechanism make the tool fast to set up and simple to reuse throughout a shift. The instrument’s readable geometry and robust tips reduce interruptions for tip dressing or replacement, helping maintain throughput. Supplied as a practical workshop instrument rather than a delicate precision gauge, it suits technicians and craftsmen who require dependable layout capability day in, day out—backed by Metav’s focus on reliable supply and industry-grade products. For a dependable beam compass from the Metav IndustryLine range, contact Metav Werkzeuge in Emmerich to discuss suitability for specific applications or to arrange purchase; the Metav team can provide precise ordering and delivery information via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M201.274 GTIN: 4054469182742 Manufacturer: Metav IndustryLine Facts Measuring range: 0–500 mm Maximum measuring range: 500 mm Weight: 2 kg Rod diameter: 19 mm Suitable for calipers/diameters up to 1000 mm Special features Material: stainless steel (INOX) Carbide (HM) scribing tips Analogue beam compass configuration Measuring tips Ø25 × 100 mm ECLASS: 21170344 FAQ How is the beam compass best used for layout tasks? The beam compass is intended for scribing and dividing work across medium-sized components; its stainless-steel beam and carbide tips allow clear layout lines for subsequent machining or assembly when using the Bar compass M201.274. Can the tool mark hard materials reliably? Yes. The carbide-tipped points maintain sharpness on harder or abrasive surfaces, so the compass provides durable, repeatable scribing without rapid wear. Is this instrument suitable for workshop and machine-shop use? The construction and 0–500 mm range make it suitable for standard machine-shop layout; the design balances stiffness and reach for everyday marking tasks. Are the measuring tips large enough for stable marking? The measuring tips are specified as Ø25 × 100 mm, offering a stable contact area that supports consistent scribe depth and visible marks, reducing slippage on textured surfaces. Does the product work with large-diameter measurements? The unit is compatible with calipers and setups handling diameters up to 1000 mm, enabling its use in broader layout workflows and with larger fixtures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
60 mm Carbide Replacement Tip Ø8 mm for Rod Caliper up to 500mm, - Metav IndustryLine
Take advantage of a carbide contact and precise dimensions to restore measuring reliability for medium-range calipers; the spare tip reduces wear-related variation and keeps inspection cycles stable. Order the component directly via Metav Werkzeuge or contact the consultants for fitment advice. Replacement tip for rod-compass caliper up to 500 mm, carbide, 60 mm, Ø 8 mm (Metav IndustryLine) Replacement tip for rod-compass caliper up to 500 mm, carbide, 60 mm, Ø 8 mm offers a hard-wearing contact solution for workshop and toolroom metrology, designed to fit specified Metav caliper models Carbide tip for long wear resistance 60 mm length with Ø 8 mm shank Compatible with M201.173/174 calipers Durability that maintains measurement stability The carbide tip provides high hardness and excellent wear resistance, which reduces contact deformation during frequent measurements. This leads to improved repeatability and fewer recalibrations compared with softer contact points. A single, robust contact piece lengthens service intervals and supports consistent inspection processes in production and quality control, ensuring measured values remain reproducible across repeated checks. Fast replacement to reduce downtime Designed with a 60 mm working length and an Ø 8 mm shank, the tip slips into the holder with a secure fit and minimal adjustment. Compatibility with M201.173/174 calipers streamlines maintenance procedures and shortens setup time for routine swaps. The direct replacement format eases inventory planning for spares and supports uninterrupted measuring capability, which helps maintain throughput in busy workshops. Suitable for medium‑range measuring tasks in the workshop Classified for medium-range calipers (up to 500 mm), this spare tip is intended for applications where reach and stiffness need to be balanced, such as measuring fixtures, housings and medium-sized components. The hardened contact surface resists abrasion from repeated edge contact and preserves the caliper’s original measuring characteristics. Metav’s supply of this component reflects a practical approach to keeping metrology tools serviceable and dependable in everyday industrial use. Contact Metav Werkzeuge today to confirm compatibility for M201.173/174, secure the correct replacement tip and maintain uninterrupted measuring performance — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M201.173.2 GTIN: 4061905053603 Manufacturer: Metav IndustryLine Facts Length: 60 mm Shank diameter: Ø 8 mm Weight: 0.02 kg Special features Material: Carbide (Hartmetall) Compatible with: M201.173/174 calipers Suitable for: Medium-range calipers (up to 500 mm) FAQ Is this tip compatible with other caliper models besides M201.173/174? Compatibility is specified for M201.173/174; adaptations for other models may require verification of shank diameter and holder design before use with the replacement tip. What advantages does the carbide contact bring for workshop use? The carbide contact offers superior wear resistance and dimensional stability, which helps the caliper maintain repeatable readings under frequent use and reduces the need for early replacement. How simple is the installation of the replacement tip? Installation is straightforward: the Ø 8 mm shank is intended to fit the corresponding holder on the specified calipers and allows quick replacement to minimise downtime. Can this tip be used for precision laboratory work? While robust and wear‑resistant, the tip is primarily aimed at workshop and toolroom metrology for medium‑range measurements rather than ultra‑high-precision laboratory applications. Will replacing the tip affect calibration of the caliper? A correctly fitted, manufactured replacement tip preserves the original contact geometry; calibration status should be checked after replacement as part of normal quality procedures. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Bow Divider With Riveted Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Reliable long-reach scribing and robust hinge construction make this divider a practical choice for workshop layout and pattern work; benefit from hardened steel construction, a 600 mm working span and DIN 6486 conformity. Order the divider directly via Metav Werkzeuge or consult our specialists for application advice. Bow divider M214.217 — 600 mm, hardened steel, riveted hinge (Metav IndustryLine) The Bow divider M214.217 is a heavy-duty workshop divider designed for marking, transferring and laying out arcs and radii up to 600 mm, suited to metalworking and pattern-making tasks Robust hardened steel construction 600 mm working span for large arcs Riveted hinge for long-term stability Manufactured to DIN 6486 standard Accuracy and reach that support reliable layout work The combination of a long-legged design and hardened construction gives a clear technical advantage when marking large components. With a working span of 600 mm, this divider extends the reach of conventional layout tools while remaining manageable at a weight of 0.7 kg. The hardened steel legs reduce wear at the tips and pivot points, so scribed lines stay consistent across repeated operations. Conformity with DIN 6486 provides an assured baseline for dimensions and interchangeability on standard benches and jigs, which supports predictable workflow integration and quality control. Built for durability and repeatable pivot behaviour A riveted hinge is the defining mechanical feature for long-term workshop use: the joint is compact, resistant to loosening under vibration and designed to maintain alignment through repetitive opening and closing. This construction reduces play at the pivot and helps preserve the original setting, translating to fewer rechecks and less rework on marked parts. The solid steel build also tolerates the knocks and handling typical for daily shop use, so the instrument delivers serviceable life and consistent performance in industrial environments. Practical advantages across metalworking and pattern-making This divider is optimised for layout, template transfer and scribing on a variety of metalwork tasks where large radii or spacings are required. The long legs and rigid profile make it suitable for marking sheet, plate and fixture surfaces; the modest mass keeps it simple to position and manoeuvre for one‑person operation. Where repetitive or large-format marking is part of production, the instrument supports faster set-ups and clearer transfer lines, improving downstream fit and assembly. The robust construction and clear technical specification mean this tool integrates well into standardised workshop procedures and documentable inspection routines. Contact Metav Werkzeuge today to discuss the M214.217 bow divider and find the best configuration for your application; the Emmerich team offers direct technical advice by email or phone Technical data Article number: M214.217 GTIN: 4054469107325 Manufacturer: Metav IndustryLine Facts Length: 600 mm Weight: 0.7 kg Special features Material: hardened steel Riveted hinge Standard: DIN 6486 FAQ What range of radii can be scribed with this divider? The bow divider M214.217 covers arcs up to a 600 mm span, providing large-radius capability for layout and template work. Is the hinge serviceable or adjustable? The riveted hinge is designed for durability and to minimise play; it provides stable pivot behaviour suited to repeated use rather than frequent user adjustment. What materials is this divider intended for? The M214.217 is constructed from hardened steel and is suitable for marking and scribing on common workshop materials such as steel plates and non-ferrous metals. Does the product conform to any standards? Yes, the instrument is manufactured in accordance with DIN 6486, ensuring consistent dimensional characteristics for workshop use. How heavy and portable is the divider for bench work? Weighing 0.7 kg, the divider offers a balance between rigidity and portability, making one-person handling practical for most layout tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm External Divider With Riveted Hinge, Steel, DIN 6484 - Metav IndustryLine
Benefit from the combination of a rivet-hinge for repeatable alignment, a 600 mm reach for large workpieces and robust steel construction to secure consistent marking. Order the divider directly via Metav Werkzeuge or consult our specialists for application advice. Outside divider, riveted hinge, 600 mm (Metav IndustryLine) Outside divider, riveted hinge, 600 mm is a steel outside-measuring divider designed for marking, transferring diameters and setting distances on large components in workshop and fabrication environments. Riveted hinge for repeatable alignment 600 mm reach for large workpieces Solid steel construction for longevity Conforms to DIN 6484 for standard compliance Accurate marking across large components Built for reliable workshop use, this outside divider features a rivet hinge that locks the legs in a stable position, enabling repeatable alignment when marking circles or transferring measurements. The 600 mm reach expands the usable range compared with standard compasses, so larger diameters and greater spans can be scribed without improvisation. The instrument’s balance—at 0.6 kg—provides enough mass to reduce vibration during marking while remaining manageable for single‑operator tasks. These attributes translate into faster set‑ups and fewer reworks, which is a practical efficiency advantage in production and maintenance routines. Robust construction that keeps maintenance low Manufactured from steel and produced to DIN 6484, this divider is designed for everyday workshop stresses. The riveted joint resists loosening under repeated adjustment, reducing the need for frequent retensioning or repairs. Compliance with the stated standard gives a verifiable basis for quality assurance processes and supports consistent results across batches of work. The combination of solid material selection and simple, serviceable mechanics means predictable lifetime costs and less downtime compared with lighter, non‑standard alternatives. Easy integration into workshop workflows The simple form factor and familiar operation make the tool straightforward to include in layout and marking stations. The instrument’s long span is particularly useful in sheet‑metal fabrication, pipe marking and layout of mould components where extended reach is required. Settings made on the device remain stable thanks to the riveted hinge, supporting repeatable processes and clear handover between operators. For specification checks or to ensure the instrument matches particular application needs, guidance from Metav’s application specialists is available to help select the correct measuring and marking equipment for the task. Choose the Metav IndustryLine outside divider when stable, long‑reach marking is required — contact Metav Werkzeuge in Emmerich for tailored application advice or to order through our experts. Technical data Article number: M214.237 GTIN: 4054469107509 Manufacturer: Metav IndustryLine Facts Length: 600 mm Weight: 0.6 kg Tariff number: 90172039 Special features Material: Steel Riveted hinge Standard: DIN 6484 Category: Divider FAQ What tasks is this outside divider suitable for? This outside divider is intended for marking, transferring diameters and setting distances on larger workpieces; the 600 mm span makes it suitable for sheet metal, pipe marking and mould layout tasks. Is the hinge adjustable or fixed? The riveted hinge is a secure, serviceable joint designed for stable settings and repeatable alignment; it is not a quick‑release clamp but provides long‑term positional stability. Which standard does the tool comply with? The tool is produced to DIN 6484, ensuring a standardised shape and manufacturing quality for consistent workshop use. How heavy is the instrument and how does that affect handling? At 0.6 kg the instrument provides sufficient mass for stable marking while remaining manageable for single‑person operation during layout tasks. Can this divider be used for precision measurement tasks? While primarily a marking and layout instrument, the stable joint and robust construction support reproducible scribing; for laboratory‑grade dimensional measurement, dedicated metrology instruments are recommended. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Internal Caliper With Rivet Hinge, Steel, DIN 6482 - Metav IndustryLine
Take advantage of the robust steel construction, the 600 mm measuring reach and the rivet hinge for stable, repeatable internal measurements; order via Metav Werkzeuge or contact our consultants for application advice. Internal Caliper M214.227 — 600 mm steel inside caliper with rivet hinge (Metav IndustryLine) The internal caliper M214.227 is a purpose‑built 600 mm steel instrument with a rivet hinge, designed for repeatable internal measurements in workshops, toolrooms and production environments 600 mm measuring range Solid steel construction Rivet hinge for stable operation Conforms to DIN 6482 Stable long‑reach measuring for reliable results The instrument is engineered for reproducible internal measurements over a long span: the 600 mm reach provides access to deep bores and large housings while the steel construction keeps the profile rigid and resistant to flexing. Compliance with DIN 6482 ensures that the geometry and tolerances match recognised workshop standards, which reduces rework and speeds up quality checks. The rivet hinge delivers a consistent pivot with low play, translating to dependable repeatability when checking diameters or step depths on medium‑sized assemblies. Practical handling that suits daily workshop routines Designed for straightforward handling, this inside caliper combines a simple, robust mechanism with a geometry that supports steady one‑hand operation where practical. The rivet hinge is maintenance‑friendly and, together with the plain steel profile, offers long service life even under frequent use. Classified in the large class (measuring range up to 1,000 mm), the tool bridges the gap between compact gauges and heavy long‑span devices, making it especially suitable for jig, fixture and component inspection in metalworking and fabrication shops. Trusted supply and application support from Metav Sourced under the Metav IndustryLine umbrella, the caliper benefits from a distribution concept that focuses on accessibility and consistent quality. Metav’s quality filter in Emmerich guarantees that workshop‑grade measuring tools meet practical demands, while a broad product range simplifies procurement for maintenance and production teams. For customers seeking clear, workshop‑oriented measurement solutions, this caliper combines ruggedness with conformity to familiar standards and the reassurance of a well‑established supplier network. Speak to Metav Werkzeuge in Emmerich to confirm whether the Metav IndustryLine internal caliper M214.227 with 600 mm measuring range and DIN 6482 compliance meets the specific requirements of the production task and to arrange expert technical advice Technical data Article number: M214.227 GTIN: 4054469107417 Brand: Metav IndustryLine Standard: DIN 6482 Category: Divider / caliper (Zirkel) Dimensions & core values Measuring range: 600 mm Length: 600 mm Tariff number: 90172039 Special features & materials Material: Steel Rivet hinge Designed for internal measurements Suitable for workshop and toolroom use FAQ What measuring tasks is this caliper intended for? This internal caliper M214.227 is intended for internal diameter, step and bore assessments on medium‑sized components where a 600 mm reach and a rigid steel profile are required. Does the caliper meet any standards? Yes, the Metav IndustryLine internal caliper M214.227 conforms to DIN 6482, ensuring geometric and tolerancing compatibility with common workshop inspection procedures. How robust is the hinge and construction? The rivet hinge and steel construction provide a durable pivot and profile: the design focuses on low play and long‑term stability for repetitive internal measurement tasks. Can this tool be used in a quality control routine for medium assemblies? The 600 mm reach and adherence to DIN 6482 make the Metav IndustryLine M214.227 suitable for routine inspection of medium assemblies, jigs and housings within workshop and production environments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
600mm Pointed Divider With Rivet Hinge, Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of the combination of long reach, hardened steel construction and a stable rivet hinge for reliable layout and transfer work in the workshop; order the divider directly via Metav Werkzeuge or consult the Metav team for application advice. Pointed divider M214.207 — 600 mm rivet-hinge divider in hardened steel (Metav IndustryLine) A Pointed divider M214.207 designed for precise scribing and transfer marks on large components in engineering and metalworking environments. 600 mm span for large-format layout work Hardened steel construction for long life Rivet hinge ensures stable, precise joint Conforms to DIN 6486 for standard compliance High reach with consistent marking accuracy The long-span 600 mm reach gives this divider the range required for larger templates, flanges and sheet-work while maintaining repeatability. Constructed from hardened steel, the tool resists wear at the points and along the legs, which sustains the initial setup and reduces the need for frequent reworking. The compact mass of 0.7 kg keeps handling comfortable during repetitive layout tasks and ensures that the instrument remains controllable over longer strokes. The rivet hinge gives a consistently stable pivot that minimises play between the legs, so marks remain accurate across the whole span. These characteristics make the tool especially suitable where stable geometry and clear scribe lines are required for downstream machining or assembly. Robust build for workshop durability and dependable performance Durability and low maintenance are central to the divider’s design. The hardened steel construction offers resistance to abrasion and the effects of workshop use, while the simple rivet-joint design reduces mechanical complexity and avoids components that commonly fail. The tool’s conformity to DIN 6486 indicates adherence to an accepted standard for dividers and compasses, providing a verifiable basis for procurement decisions in professional environments. The balance between a rigid leg profile and a manageable weight supports precise manual operation without fatigue, allowing consistent results during extended layout sessions or repetitive marking operations. Practical integration into everyday production workflows As a purpose-built marking instrument, the divider integrates directly into layout benches, tool rooms and on-site assembly areas. The long reach accommodates larger parts that would otherwise require stepwise scribing or multiple setups, improving efficiency and reducing cumulative positioning error. The straightforward, no-frills construction of this model makes it a reliable addition to the standard toolkit for machinists, pattern makers and maintenance teams who value predictable, serviceable tools. Where documentation is required, the product’s classification and data support traceability and inventory management in production environments. For straightforward procurement or specific application guidance, contact Metav Werkzeuge to discuss the Pointed divider M214.207 and its suitability for the intended marking tasks. Technical data Article number: M214.207 GTIN: 4054469107257 Tariff number: 90172039 ECLASS: 21170305 Facts Length: 600 mm Weight: 0.7 kg Special features Material: hardened steel Joint: rivet hinge Standard: DIN 6486 Category: Divider FAQ What applications is this divider suited for? The Pointed divider M214.207 is designed for scribing and transfer marking on larger components, making it suitable for metalwork, template work and general engineering layout tasks. How does the rivet hinge affect performance? The rivet hinge provides a stable, low-play pivot so that leg geometry remains constant; this stability supports repeatable marking across the tool’s full span. Is the material suitable for workshop use? Yes — the divider is made from hardened steel, which improves wear resistance of the points and legs and supports long-term accuracy in daily workshop use. Does the divider meet any industry standards? This model conforms to DIN 6486, offering standard-compliant geometry and manufacturing relevant for professional procurement and quality records. What are the physical dimensions and weight? The instrument has a 600 mm span and weighs 0.7 kg, providing long reach while remaining manageable for manual layout work. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Bow Divider With Rivet Hinge Hardened Steel, DIN 6486 - Metav IndustryLine
Take advantage of a combination of long-range capacity and rugged construction for reliable scribing across large components; the robust rivet hinge and hardened steel arms ensure stability and repeatable results for pattern work and layout. Order directly via Metav Werkzeuge or ask the consultants for tailored advice. Bow-point divider M214.218 — Metav IndustryLine, 800 mm span, riveted hinge The Bow-point divider M214.218 is a long-span scribing instrument for layout and transfer work in metal and woodworking shops, designed for accurate marking on large components and templates 800 mm measuring span Hardened steel construction Riveted hinge for stable joints Complies with DIN 6486 Long-span accuracy for large-format layout The instrument’s elongated arms deliver an 800 mm span that makes large circles and long arcs straightforward to lay out, reducing the need for repeated setups. Built from hardened steel, the frame resists deformation under normal workshop loads so linear accuracy is preserved over time. The geometry of the bow-style legs maintains constant contact pressure at the points, which supports precise scribing on sheet metal, timber and templates where repeatability matters. Stable joint and confident handling A rivet hinge provides a durable pivot that stays true through frequent use; the riveted joint minimises play and offers consistent pivot friction for controlled movement. At a mass of 1.9 kg, the tool balances solidity with manoeuvrability, helping to keep both hands free for guiding and securing the workpiece. These properties reduce measurement variation and speed up layout tasks in production and jig-making environments. Practical benefits for workshop and production use Conformance with DIN 6486 signals that the design follows recognised standards for marking and layout tools, making the divider a dependable choice for workshop routines and quality-conscious operations. The robust material choice and straightforward construction mean low maintenance and long service life, translating into fewer tool replacements and stable process outcomes for fabrication, repair and pattern-making. Versatile application and efficiency gains This long-arm divider is suited to large-format jobs in metalworking, carpentry and pattern shops where reliable repeat scribing and transfer work reduce cycle time. The instrument’s simple geometry and rugged hinge make it an efficient alternative to repeated measuring, helping maintain consistent offsets and centre marks across assemblies — a pragmatic investment for teams focused on throughput and reproducibility. Contact Metav Werkzeuge today to discuss the Bow-point divider M214.218 from Metav IndustryLine and secure a durable, long-span scribing solution tailored to large-format layout needs — Metav Werkzeuge is available at Parkring 45, Emmerich, for enquiries and supply. Technical data Article number: M214.218 GTIN: 4054469107332 Tariff code: 90172039 Facts Measuring span: 800 mm Weight: 1.9 kg Standard: DIN 6486 Special features Material: Hardened steel Joint: Riveted hinge Category: Divider (bow-point) FAQ What is the maximum span of this divider? The divider offers an 800 mm maximum span, specified as the measuring reach for the M214.218 bow-point divider. Which material is used for the arms and how does it affect durability? The arms are made from hardened steel; this increases wear resistance and helps retain accuracy during prolonged workshop use. Is the joint suitable for frequent professional use? Yes. The riveted hinge provides a robust pivot that minimises play and is intended for repetitive layout tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Internal Dial Caliper With Rivet Hinge, Steel, DIN 6482 - Metav IndustryLine
Benefit from a combination of extended reach and robust construction that supports repeatable scribing across large components; the inside divider with rivet hinge delivers controlled handling and clear alignment over an 800 mm span. Order the tool directly via Metav Werkzeuge or consult the team for application advice. Inside divider with rivet hinge – 800 mm, 1.0 kg (Metav IndustryLine) An inside divider designed for scribing and layout on large components, featuring a rivet hinge and a substantial 800 mm span for workshop and fixture applications Robust steel construction, rivet hinge 800 mm length for large components Complies with DIN 6482 standard Extended reach for large-format layout The 800 mm span places this instrument in the large measurement class (measurement range up to 500–1,000 mm), making it suitable for layout, centre‑finding and scribing on plates, housings and large assemblies. The long legs provide the reach required for workpieces that exceed the range of standard compasses, while the geometry retains sufficient stiffness to keep points aligned. In practice, this reduces repositioning and speeds up repetitive marking tasks on machining or fabrication projects. Durable mechanism and standard conformity Constructed from steel with a rivet hinge, the tool prioritises long‑term rigidity and repeated accuracy under workshop conditions. The riveted joint offers a reliable pivot that resists loosening during use; with a nominal mass of 1.0 kg, the balance helps stabilise the instrument when transferring measurements. Compliance with DIN 6482 ensures that dimensions and functional design meet established drawing‑instrument criteria, simplifying integration into existing quality processes and inspection routines. Practical handling and workshop advantages The instrument is designed for straightforward workshop use: the robust legs and point geometry permit precise scribing along edges and inside diameters, while the solid construction simplifies clamping or steadying on larger assemblies. Where consistent alignment over distance is essential, the long‑span divider reduces the need for temporary fixtures. Maintenance is limited to routine cleaning and occasional hinge inspection, so downtime is minimal and service life is extended. As a manual layout tool, it complements machine measurement systems and supports quick checks before machining or welding operations. Choose Metav IndustryLine for accessible precision: for large‑range scribing tasks the inside divider with rivet hinge offers durable control and clear compliance with DIN standards — contact Metav Werkzeuge to discuss application specifics or to place an order. Technical Data SKU: M214.228 GTIN: 4054469107424 Material: Steel Length: 800 mm Weight: 1.0 kg Standard: DIN 6482 Tariff number: 90172039 ECLASS: 21170336 ETIM: EC000029 Facts Measurement range class: Large (up to 500–1,000 mm) Mass: 1.0 kg Primary material: Steel Special features Rivet hinge for stable pivoting Compliant with DIN 6482 Category: Divider / Scribing compass Suitable for layout on large components FAQ What is the primary application of this divider? The inside divider with rivet hinge is intended for scribing, centre finding and layout work on large components where an 800 mm span is required. How robust is the construction for daily workshop use? Built from steel with a rivet hinge, the instrument offers a durable pivot and solid leg stiffness, making the divider suitable for regular use in fabrication and machining environments. Does the tool meet any industry standards? Yes, the product complies with DIN 6482, ensuring conformity with recognised drawing‑instrument specifications. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800mm Outside Caliper With Riveted Hinge, Steel, DIN 6484 - Metav IndustryLine
Take advantage of the combination of a long 800 mm reach, robust steel construction and a precision rivet hinge for reliable large-format marking and layout work; order the divider directly via Metav Werkzeuge or ask our consultants for application advice. External divider M214.238 — 800 mm steel divider with rivet hinge (Metav IndustryLine) The External divider M214.238 is a long-reach steel divider designed for layout and scribing of large components in metalworking, fabrication and workshop assembly. 800 mm reach for large components Rivet hinge for consistent alignment Solid steel construction for longevity Compliant with DIN 6484 for standard use Long reach that speeds up large-format layout The 800 mm span enables fast, repeatable marking across larger workpieces without the need to re‑position smaller tools. As a long‑reach divider made from steel, this tool combines reach with the stiffness required for accurate scribing on plate, sheet and fabricated assemblies. Conformity with DIN 6484 ensures the geometry and hinge arrangement follow an established standard, which aids interchangeability and predictable behaviour in workshop processes. The result is shorter set-up times and fewer alignment checks during serial layout tasks. Stable hinge and construction for reproducible results A precisely formed rivet hinge minimises play and secures a steady leg angle during use, which translates directly into improved precision and repeatability of marks. The steel construction resists bending and wear in everyday shop conditions, delivering a robust feeling in the hand and a durable working life. For practical purposes this means fewer adjustments between measurements and less downtime for maintenance, so layout operations proceed more smoothly and confidently. Built for pragmatic workshop use and heavy duty tasks This large-format divider serves layout, scribing and transfer tasks where a conventional small divider would require multiple steps. The tool’s construction suits metalworking and general fabrication; the combination of reach, stiffness and standardised hinge design supports consistent transfer of dimensions across longer distances. Alongside its functional benefits, the design is straightforward to handle and maintain, making it a reliable addition to a production bench or maintenance trolley for repeated, clear markings. Contact Metav Werkzeuge in Emmerich for tailored guidance on integrating the Metav IndustryLine M214.238 into current workflows and for a customised quotation. Technical data Article number: M214.238 GTIN: 4054469107516 Manufacturer: Metav IndustryLine eClass: 21170325 ETIM: EC000029 Facts Length: 800 mm Zolltarifnummer: 90172039 Special features Material: Steel Hinge: Rivet hinge Standard: DIN 6484 Category: Divider / Zirkel FAQ What reach does the divider offer? The Metav IndustryLine external divider M214.238 has an 800 mm reach suitable for large components and extended layout work. What material and hinge type are used? This divider is constructed from steel and uses a rivet hinge to provide stable alignment and long service life. Which standard applies to this tool? The tool is manufactured in accordance with DIN 6484, ensuring standardised hinge geometry and predictable performance. Is the divider intended for metalworking tasks? Yes, the M214.238 is designed for workshop and fabrication applications such as scribing, marking and transferring dimensions on metal assemblies. How does the rivet hinge improve results? The rivet hinge reduces play and secures the legs at the chosen span, improving repeatability of marks and lowering the need for frequent re‑adjustment. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pair of Carbide Scriber Tips for 201.274–201.277 Standoff Compass - Metav IndustryLine
Taking advantage of durable carbide tips and straightforward compatibility with the 201.274–201.277 series provides reliable, repeatable scribing for workshop layout tasks; the robust design minimises downtime and simplifies maintenance. Order replacements via Metav Werkzeuge or consult our advisors for technical clarification. Replacement Scribing Tips M201.274.A — Pair with Carbide Points (Metav IndustryLine) Replacement Scribing Tips M201.274.A designed for precision marking and layout work in mechanical workshops and maintenance departments Durable carbide marking tips for long service life Compatible with 201.274–201.277 series fittings Robust construction for repeatable scribing results Precision and longevity for everyday marking The set of carbide tips is engineered to deliver consistent line quality over extended use, making it suitable for recurring layout and scribing operations. The hard-wearing point material retains sharpness, reducing the frequency of replacement and ensuring repeatable marks on hardened surfaces. This lowers rework and contributes to a steadier production flow, particularly where accuracy in transfer and reference lines is essential. Fast replacement, reduced downtime Designed for swift installation on the matching fittings, the replacement tips allow maintenance teams to restore full functionality quickly. The compact package (gross weight approx. 0.2 kg) keeps stock management simple and the minimal handling required reduces the risk of alignment errors during changeover. Compatibility with the 201.274–201.277 range ensures spare-part standardisation and fewer different spare items to carry in the workshop. Practical fit for workshop layout and measuring fixtures These scribing points are a pragmatic accessory where precision marking supports assembly, machining and inspection tasks. The robust design resists deformation under normal scribing forces and maintains a reliable centre point for repetitive work. Metav IndustryLine supplies this spare part as part of a broader commitment to accessible, professional measurement solutions, backed by warehouse distribution in Emmerich for dependable supply. For reliable, workshop-ready replacement scribing tips from Metav IndustryLine, contact Metav Werkzeuge for ordering and compatibility advice; Metav Werkzeuge is available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: M201.274.A GTIN: 4054469182759 Manufacturer: Metav IndustryLine Key figures Weight: 0.2 kg Features Pair with carbide tips Compatible with models 201.274–201.277 Category: Calipers (measuring instruments) FAQ What materials are these tips suitable for marking? The replacement tips are carbide-tipped for durability and are intended for standard workshop marking tasks; they produce reliable scribe marks on common metalwork during layout operations with the compatible fixtures. Can these tips be fitted to other model ranges? Compatibility is specified for the 201.274–201.277 series; fitting to other ranges is not guaranteed and should be verified against the relevant fixture dimensions before purchase. How often should the carbide points be replaced? Replacement frequency depends on usage intensity and the materials marked; the carbide construction is intended to extend service life compared with softer points, reducing replacement intervals in regular workshop use. Is the product supplied as a calibrated measuring instrument? This item is an accessory (scribing tips) and is supplied as a replacement part; it does not constitute a calibrated measuring instrument. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Pinpoint layout and repeatable radii for workshop precision
The category covers dividers for industrial scribing and measurement transfer, including bow compasses, point dividers and scribing compasses designed for heavy-duty workshop use. These tools serve the essential task of transferring centres, radii and distances reliably onto metal and other workpiece surfaces.
How dividers and related tools work in production
Used alongside granite surface plates and height gauges, dividers enable exact layout of bores, edges and machining references before cutting or drilling. In practice, parallel scribing gauges and ergonomic scribing needles with carbide tips create fine, durable lines on hardened steel without weakening the material. For vertical measurements, height gauges — from mechanical models with vernier or double-counter readouts to digital height gauges with high resolution, data interfaces and quick tolerance checks — ensure height transfer that integrates with traceable measuring workflows. Measuring dividers with hardened points and robust joints keep set dimensions stable, even under repeated use, while quick-clamp fine adjustments permit rapid re‑setting during batch production.
Tangible benefits that improve throughput and quality
- Increased first-pass yield through accurate transfer of bore centres and edges.
- Reduced setup time via stable fixation and quick-clamp fine adjustments.
- Longer service life thanks to components in hardened tool steel, stainless alloys and carbide tips.
- Seamless integration into inspection routines using digital height gauges with data-export capabilities.
- Consistent repeatability when scribing radii and distances with engineered joint stability.
Metav as your precision partner for everyday workshop needs
Metav combines decades of measurement expertise with a broad selection of workshop-grade layout tools, making high accuracy accessible for industry and trade. With over 48,000 customers and a central quality hub in Emmerich, Metav provides a dependable supply of dividers, scribing compasses and measuring dividers that reduce supplier complexity and support continuous production.
Key takeaway
For reliable pre‑machining layout, dividers and associated scribing and height-measuring tools ensure exact geometry transfer, minimising waste and streamlining shopfloor processes.
FAQ
What types of dividers are best for heavy-duty steel layout?
For heavy-duty steel layout, choose measuring dividers or point dividers with hardened points and robust joints; these designs keep measurements fixed under repeated use and produce clear scribe lines on hardened surfaces.
Can digital height gauges be integrated into quality documentation?
Yes. Digital height gauges in this range offer high resolution and data interfaces that allow direct transfer of measured values for tolerance checks and traceable quality records.
How do scribing compasses differ from standard compasses?
Scribing compasses are built for industrial use: they feature hardened tips, stable joints and fine-adjust mechanisms, unlike lightweight drawing compasses intended for paper or light materials.
Are there solutions for quick re‑setting during batch work?
Measuring dividers with quick-clamp fine adjustments enable fast, repeatable re‑setting, reducing downtime between consecutive parts without sacrificing precision.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com