Ausstattungen für Fräsmaschinen

Take advantage of the combination of robust load capacity, a compact precision table, and a swivelling design that improves set-up flexibility for small-series production and inspection tasks; order the clamping table directly via Metav Werkzeuge or consult our specialists for application advice. VUT-1515 Clamping table by Vertex — heavy‑duty, swivelling precision fixture A VUT-1515 clamping table engineered for heavy loads and swivelling positioning, ideal for workshop fixtures, inspection benches and precision assembly tasks Robust base 180×285 mm for stable mounting Swivelling design for versatile positioning Precision table 156×150 mm for small workpieces Rated 30 kg horizontal, 12 kg vertical load Stability that keeps measurements and machining consistent The VUT-1515 delivers a stable platform for demanding workshop tasks thanks to its substantial base footprint of 180×285 mm and a mass of 17.6 kg, which together reduce vibration and movement during clamping or inspection. This stability translates into fewer re‑setups and more reliable results when working with small components on the 156×150 mm measuring surface. The design minimises micro‑motion, aiding repeatable positioning and supporting quality‑control procedures where consistent alignment is required. Flexible positioning for complex setups A swivelling top enables faster orientation of the workpiece without the need for repeated reclamping, making the unit suitable for fixtures that require multiple access angles. The swivel function supports efficient workflow in assembly and measuring stations by allowing quick alignment changes while maintaining the clamped part’s datum. The compact height of 115 mm keeps the centre of gravity low, improving handling when rotating loads and preserving secure contact between the workpiece and the measuring table. Built for heavy‑duty metrology and small production runs Rated to carry 30 kg horizontally and 12 kg vertically, this clamping table is specified for substantial single‑component loads and fixturing of heavier assemblies on inspection benches. The load ratings permit use with robust measuring instruments and small machine tools where a rigid support is essential. The combination of a precision work surface and high load tolerance reduces the need for auxiliary supports, simplifying setup and shortening cycle times in light production and repair workshops. Designed for integration and dependable service life With a compact footprint and standardised mounting dimensions, the clamping fixture fits easily into existing benches or metrology tables, allowing straightforward integration into workshop layouts. The unit’s construction emphasises longevity and consistent performance in repetitive tasks, supporting a predictable maintenance schedule and reducing downtime. Sourcing through Metav Werkzeuge brings additional assurance: supply is coordinated from a European quality filter in Emmerich, ensuring reliable availability and traceable provenance. Contact Metav Werkzeuge for specification support and to arrange fast delivery of the Vertex VUT-1515 clamping table for the workshop or inspection bench Technical Data Article number: VUT-1515 GTIN: 4061905084034 eClass: 21020702 ETIM: EC001959 Facts Weight: 17.6 kg Height: 115 mm Measuring table: 156×150 mm Base footprint: 180×285 mm Load capacity horizontal: 30 kg Load capacity vertical: 12 kg Special features Swivelling design for versatile positioning Suitable for heavy loads Compact precision work surface Brand: Vertex FAQ What maximum load can the clamping table carry horizontally? The clamping table from Vertex is rated for a 30 kg horizontal load capacity, suitable for substantial single components on inspection or assembly benches. Is the work surface suitable for small, precision parts? Yes, the 156×150 mm measuring table provides a compact, accurate platform for small‑part fixturing and measurement tasks. Can the table be mounted on a standard metrology bench? The VUT-1515’s base footprint of 180×285 mm and its compact height of 115 mm allow integration onto typical benches and inspection tables with standard mounting arrangements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact clamp with adjustable height, copper contact surface and 22 mm T-slot compatibility for stable workholding; benefits include precise, repeatable clamping and easy integration into existing fixtures. Take advantage of the adjustable 0–120 mm range and the copper platter for reliable contact and reduced marking. Order the part directly via Metav Werkzeuge or consult the technical team for application advice. VCB-406 Clamp — Adjustable 0–120 mm, copper contact platter (Vertex) A VCB-406 clamp engineered to secure workpieces in 22 mm T-slot fixtures and light machining setups, offering a compact footprint with versatile mounting options Adjustable height 0–120 mm Copper contact platter Fits 22 mm T-slots Optional U-shape or rotatable design Clamping force 2 kgf Secure, controlled holding for delicate setups The clamp provides precise positioning through an adjustable height of 0–120 mm, enabling repeatable setups on fixture plates and machining tables. The specified clamping force of 2 kgf delivers a controlled hold that is particularly suitable where overtightening could damage components or distort precision measurements. The simple mechanical adjustment reduces setup time and supports efficient small-batch production by maintaining consistent contact pressure across repeated operations. Fast integration with standard T-slot systems Designed for seamless installation in standard workstation systems, the device mates with a 22 mm T-slot, using the M20x7" bolt for secure fixing. The availability of an optional U-shape or a rotatable variant increases adaptability for different fixturing needs, allowing the clamp to be oriented or swapped quickly without modifying the base plate. This compatibility minimises retrofitting work and supports existing tooling strategies, keeping machine downtime to a minimum. Compact construction that supports productive workflows With a compact footprint of 157 × 60 × 54 mm and a mass of 4.6 kg, the clamp balances stability with manageable handling during fixture changes. The copper platter at the contact point improves surface conformity and reduces marking on delicate workpieces while aiding consistent electrical and thermal contact where relevant. Manufactured to the standards expected from Vertex, the unit is intended to streamline everyday clamping tasks, making it a pragmatic choice for workshops seeking dependable, space-efficient workholding. Choose the Vertex VCB-406 clamp for dependable, adjustable workholding and contact Metav Werkzeuge in Emmerich for tailored technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VCB-406 GTIN: 4061905087813 ECLASS: 21049022 Facts Dimensions: 157 × 60 × 54 mm Weight: 4.6 kg Adjustable height: 0–120 mm Clamping force: 2 kgf T-slot compatibility: 22 mm Bolt: M20x7" Special features Copper contact platter Optional U-shape or rotatable version Product type: clamp FAQ What T-slot size does this clamp fit? The clamp is designed for 22 mm T-slots, allowing direct mounting in compatible fixture tables and machine beds. What is the adjustable height range and how does it benefit setups? The 0–120 mm adjustable height lets the clamp accommodate different workpiece profiles and maintain consistent clamp pressure across varied geometries. How much clamping force does the unit provide? This clamp offers a clamping force of 2 kgf, which is suitable for controlled holding of delicate parts and precision fixturing where excessive force must be avoided. What is the purpose of the copper contact platter? The copper platter improves contact conformity and helps to reduce marking on finished surfaces while offering reliable electrical and thermal contact where needed. Are there different versions available for special applications? Yes, the product is available in an optional U-shape or a rotatable version to increase flexibility for diverse fixturing layouts and orientations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable centralised clamping and gentle, repeatable workholding make this accessory an efficient addition to any VNC-FV setup. Benefit from a compact, robust design with axial drive and smooth jaws for consistent results — order the item through Metav Werkzeuge or consult our advisors for application-specific guidance. Vertex VNC-6AD Axial Drive with Smooth Jaws — Clamping Accessory The VNC-6AD Axial Drive with Smooth Jaws is a compact clamping accessory for the VNC-FV series, engineered to provide centralised actuation and damage‑free holding for precision machining tasks. Axial drive for fast centralised clamping Smooth jaws for damage-free workholding Compatible with VNC-FV series Compact: 158 x 90 x 61.5 mm, 2.97 kg Improved repeatability through centralised actuation The combination of an axial drive and a mechanically simple jaw interface delivers repeatable clamping that benefits batch production and set‑ups requiring tight tolerances. Centralised actuation reduces lateral play and equalises force across the jaw faces, which in turn limits part movement during machining operations. This results in more consistent part-to-part accuracy and fewer adjustments at the machine, supporting higher throughput and predictable cycle times. Gentle, secure holding for sensitive components Equipped with smooth jaws, the accessory is optimised for applications where surface integrity matters. The contact faces distribute clamping pressure without marked impressions, making the configuration suitable for soft or finished surfaces where conventional serrated jaws would cause damage. In practice, operators gain reliable workholding without the need for additional protective fixtures, reducing set‑up complexity while preserving component quality. Compact design that integrates into existing setups With compact dimensions and a mass of 2.97 kg, the accessory fits readily into VNC-FV installations and is manageable during handling and maintenance. The small footprint supports flexible machine layouts and makes retrofitting straightforward. Supplied by Vertex and stocked through Metav Werkzeuge, the unit benefits from a European quality filter and local logistics, ensuring dependable availability and informed advice for integration into industrial workflows. Contact Metav Werkzeuge to discuss how the Vertex VNC-6AD can improve clamping consistency in your shop; technical consultants are available via info@metav-werkzeuge.com or by telephone at +49 2822 7131930 Technical data SKU: VNC-6AD GTIN: 4061905092749 ECLASS: 21130302 Facts Dimensions: 158 x 90 x 61.5 mm Weight: 2.97 kg Special features Axial drive Smooth jaws For VNC-FV series Manufacturer: Vertex FAQ Is the accessory compatible with VNC-FV chucks? The VNC-6AD is specifically designed for the VNC-FV series and interfaces mechanically for direct integration with those fixtures. What are the dimensions and weight of the unit? Dimensions are 158 x 90 x 61.5 mm and the weight is 2.97 kg, making it compact and simple to handle in a workshop environment. Will the smooth jaws prevent damage to finished surfaces? Yes, the smooth jaws provide distributed contact pressure to reduce marking and help preserve surface finish compared with serrated alternatives. How does the axial drive improve clamping performance? The axial drive centralises the actuation force, reducing lateral movement and delivering more even jaw pressure for improved repeatability during machining. Can this accessory be retrofitted into existing VNC-FV installations? The compact form factor and mechanical compatibility allow straightforward retrofitting into VNC-FV systems, supporting quick installation with minimal layout changes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from precise, non‑marring workholding and a compact, low‑profile form factor that improves setup times and protects sensitive components; order the VQC-160FJ Soft Jaws directly via Metav Werkzeuge or ask our consultants if needed. VQC-160FJ Soft Jaws for VQC vises — Low‑profile, non‑marring design (Vertex) The VQC-160FJ Soft Jaws are soft-faced jaws designed to provide secure, damage‑free clamping of delicate workpieces in VQC-series machine vises for milling and light machining operations. Compatible with VQC vises Low-profile form factor for close workpiece access Protects delicate and finished surfaces Compact dimensions for efficient machine use Secure, non‑marring clamping for delicate components The primary benefit of these soft jaws is the ability to hold sensitive or finished parts without surface damage. Manufactured for use with VQC vises, the jaws present a softer contact face that distributes clamping pressure and reduces point loading, so delicate alloys and finished surfaces are preserved during machining. The softer contact material is engineered to provide repeatable grip while preventing dents or scratches that would otherwise require rework or scrap, supporting production quality and reducing waste. Consistent alignment for improved machining repeatability These jaws are dimensioned and machined to ensure consistent alignment, which aids in maintaining concentricity and positional accuracy across repeated setups. When fitted to the vise, the jaws index precisely, allowing fixtures and workholding aids to be used with predictable results. This predictability translates into fewer adjustments at the machine, shorter cycle preparation times and a measurable increase in throughput, particularly for series production and precision finishing tasks. Space‑saving profile that enhances tool access With compact outer dimensions of 159.5 × 102 × 60 mm, the design optimises the usable work envelope on the machine table and improves cutter access to complex geometries. The compact footprint is beneficial where spindle clearance is restricted or where multiple components must be fixtured within a tight envelope. Reduced bulk at the clamping face often means simpler toolpaths and less risk of cutter collisions, which supports safer, more reliable machining cycles. Robust handling and straightforward fitment Weighing 7.2 kg, the set is substantial enough to remain stable under typical clamping loads while still being manageable for workshop handling and maintenance. Produced under the Vertex range, the jaws match the interface and mounting pattern of VQC-series vises for straightforward installation and interchangeability. The construction is focused on functional durability and consistent performance, so the workholding remains dependable over repeated cycles and routine workshop use. For non‑marring precision clamping choose the Vertex VQC-160FJ soft jaws — contact Metav Werkzeuge in Emmerich (info@metav-werkzeuge.com / +49 2822 7131930) for tailored advice and rapid supply. Technical data Article number: VQC-160FJ GTIN: 4061905093517 ECLASS: 21029107 Facts Weight: 7.2 kg Dimensions: 159.5 x 102 x 60 mm Special features Soft jaws for VQC vises Non‑marring contact face Compatible with VQC-series machine vises Manufacturer: Vertex FAQ Are these jaws compatible with all VQC vise sizes? Compatibility is intended for VQC-series vises; the VQC-160FJ soft jaws match the VQC mounting pattern and are sized for corresponding VQC models. Can the VQC-160FJ soft jaws be used on finished or plated surfaces? Yes, the VQC-160FJ soft jaws are designed to protect finished and plated components by minimising surface damage during clamping. How are the jaws secured to the vise? The jaws are fitted to the vise using the standard VQC interface; the VQC-160FJ locates and retains on the vise mounting points to ensure repeatable positioning. Is a specific maintenance regime required for these jaws? Routine cleaning and inspection are recommended; the VQC-160FJ should be kept free of swarf and coolant residues to maintain consistent performance. Who manufactures the VQC-160FJ soft jaws? The VQC-160FJ is produced by Vertex and is supplied through Metav Werkzeuge for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of soft contact for delicate workpieces together with a compact footprint and solid mass for reliable clamping in small to medium workshops. These characteristics reduce surface marks and improve positional stability during machining. Order the (VQC-160L-MJ soft jaws) directly via (Metav Werkzeuge) or ask our consultants if needed. VQC-160L-MJ soft jaws for VQC vises — compact 159.5 x 102 x 60 mm, 7.25 kg The VQC-160L-MJ is a dedicated set of soft jaws designed to provide gentle yet secure clamping for VQC vises in machining and assembly environments. Soft jaws for VQC vises Compact dimensions 159.5 x 102 x 60 mm Reversible design for varied clamping Stable mass 7.25 kg for solid clamping Protect fragile components with tailored soft contact Soft jaws are used where conventional hardened jaws would damage machined surfaces. By offering a soft clamping interface, these jaws absorb contact forces and distribute pressure across a larger contact area, reducing the risk of marks, dents or deformation on delicate parts. The item is intended specifically for the VQC family of vises, ensuring a precise fit and repeatable positioning. This makes the accessory particularly suitable for finishing work, inspection setups and any operation where surface integrity matters. Small footprint, greater stability — optimised for workshop workflows With external dimensions of 159.5 x 102 x 60 mm and a mass of 7.25 kg, the component combines a compact footprint with appreciable inertia. The reduced size helps retain access around the clamped workpiece on crowded machines, while the mass contributes to steadier holding during moderate machining and assembly tasks. These characteristics translate into fewer repositioning steps and improved cycle reliability, supporting a smoother production flow in busy workshops. Simple adaptation to VQC clamping systems Designed as an accessory for VQC vises, this jaw set matches the geometry and mounting interface of the VQC product line. That compatibility means quick changeover between standard and soft jaws without additional modification of the vise body. The functional design supports straightforward alignment and consistent gripping behaviour, which in turn lowers setup time and reduces the potential for clamping-related rework. For users seeking predictable clamping performance in mixed-production environments, this accessory provides a pragmatic solution. Reliability rooted in recognised manufacturing Produced under the Vertex name, the component benefits from established industrial quality standards and production traceability. The construction and tolerancing are aligned with demands typical for clamping technology in small and medium-sized shops, where consistent repeatability is required across batches. Selecting such a branded accessory helps maintain uniform clamping characteristics across multiple vises and reduces variability in fixture behaviour on the shop floor. Contact Metav Werkzeuge for tailored advice on fitment, spare parts and suitable jaw configurations for the Vertex VQC series — Metav Werkzeuge supplies the accessory with European warehousing and expert consulting to support successful integration at your workbench. Technical Data Article number: VQC-160L-MJ GTIN: 4061905087172 Manufacturer: Vertex Machinery Works Co., Ltd. Facts Dimensions: 159.5 x 102 x 60 mm Weight: 7.25 kg Special features Soft jaws for VQC vises ECLASS: 21029107 Gallery images available (technical drawing and detail views) FAQ What is the main purpose of these soft jaws? The VQC-160L-MJ soft jaws are intended to protect delicate components during clamping by providing a softer contact surface than hardened jaws, reducing marks and deformation. Are the VQC-160L-MJ jaws compatible with all VQC vise sizes? These jaws are designed for the VQC series; compatibility depends on the specific VQC vise model and size — check the technical drawing to confirm fitment for the intended vise. What are the exact dimensions and weight of the jaws? Dimensions are 159.5 x 102 x 60 mm and weight is 7.25 kg for the VQC-160L-MJ accessory. Is the jaw material specified in the product data? Material is not specified in the available product information for VQC-160L-MJ; detailed material data should be consulted on the product sheet prior to application in specialised environments. Which identifier should be used when ordering or referencing this accessory? Use the article number VQC-160L-MJ and GTIN 4061905087172 when ordering or referencing this Vertex soft jaw accessory. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking advantage of a fitted, repeatable clamping surface and compact dimensions (159.5 × 102 × 60 mm) ensures safer handling of delicate workpieces and fewer production interruptions; order original Vertex parts via Metav Werkzeuge or consult our specialists for compatibility advice. Soft jaws VQC-160MJ — Replacement soft jaws for VQC vices, compact dimensions A set of Soft jaws VQC-160MJ designed to protect clamped workpieces in VQC vices while maintaining consistent positioning for repetitive machining tasks Soft surface to prevent workpiece damage Precision fit for VQC series vices Dimensions: 159.5 x 102 x 60 mm Protect delicate components and reduce rework The primary benefit of fitted soft jaws is reliable protection of finished or soft-surfaced components during clamping. The machined contact faces distribute clamping forces more evenly than standard jaws, reducing the risk of marking or distortion and cutting scrap rates. For production environments where part integrity matters, the combination of a compliant contact surface and a consistent seating geometry delivers measurable savings in rework time and rejects. Ensure repeatable positioning and faster setups Designed for direct use in the VQC family of vices, the VQC-160MJ provides a precision mating interface that preserves datum alignment between setups. Repeatability reduces alignment checks and shortens cycle-to-cycle setup tasks, contributing to process stability on small-batch and serial production runs. The compatibility with the VQC system supports modular workholding strategies and simplifies inventory management for spare clamping elements. Compact format that suits bench and machine work With overall dimensions of 159.5 × 102 × 60 mm and a listed weight of 7.25 kg, this set balances robustness with a size that fits most bench-mounted or machine-mounted vices in the VQC range. The compact footprint aids access in tight fixtures while providing enough mass for steady clamping. For workshops seeking to protect delicate parts without adding excessive bulk to the vice, these jaws offer a practical compromise between handling and stability. For expert guidance on selecting original Vertex soft jaws and to confirm fitment for specific VQC vice models, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp enquiries are welcome on +49 170 2837271 Technical data Article number: VQC-160MJ GTIN: 4061905087370 Manufacturer: Vertex Facts Dimensions: 159.5 x 102 x 60 mm Weight: 7.25 kg ECLASS: 21029107 Special features Compatible with VQC vices Replacement soft jaws Brand: Vertex FAQ What is the purpose of soft jaws? Soft jaws protect the clamped workpiece from surface damage and improve grip consistency; the Soft jaws VQC-160MJ are intended specifically for use with VQC vices to reduce marking and rework. Are these jaws compatible with all VQC vice sizes? The VQC-160MJ is manufactured to fit the corresponding VQC vice variant; compatibility should be confirmed against the vice model number before purchase. Can the jaws be modified for specific profiles? Soft jaws such as the VQC-160MJ are often machined to suit bespoke workpiece contours; confirm that any modification preserves clamping integrity and the original fit to the vice. What handling considerations apply to these jaws? Given a weight of 7.25 kg and compact dimensions, the jaws are manageable for standard workshop handling and can be installed without specialised lifting equipment. Who manufactures these soft jaws? Vertex manufactures the VQC-160MJ as part of its range of workholding accessories, supplying replacement components for VQC series vices. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precision clamping and a compact footprint to protect delicate workpieces in finishing and light machining operations; order the soft jaws directly via Metav Werkzeuge or consult our specialists for compatibility and delivery from our European stock. VQC-160L-FJ Soft Jaws for VQC Vices — Precision clamping, compact dimensions (Vertex) The VQC-160L-FJ soft jaws are designed as a replacement and protective clamping solution for VQC vice models, optimised for workshop and toolroom use where delicate surfaces must be preserved during machining. Soft jaws for VQC vices Dimensions: 159.5×102×60 mm Weight: 7.2 kg for stable clamping Protect delicate parts with controlled clamping The supplied jaws serve as a protective interface between the vice and the workpiece, reducing the risk of marking or marring during set-up and machining. By introducing a compliant contact surface, the soft jaws distribute clamping force more evenly than bare metal jaws, which maintains surface integrity on softer materials and finished components. This benefit is particularly relevant for small-batch production, inspection fixtures and finishing operations where cosmetic condition and dimensional integrity matter. Predictable setup through clear dimensions and mass With stated dimensions: 159.5×102×60 mm and a mass of 7.2 kg, the component offers a compact, stable solution that aligns with standard vice jaw faces. Consistent geometry supports repeatable positioning across multiple setups, aiding process stability and reducing the time spent re‑aligning workpieces between operations. The clear dimensional data also simplifies fixture planning and CAD integration, enabling quick checks against machine envelopes and tooling arrangements. Seamless workshop integration and reliable supply Designed for direct replacement on VQC vice faces, these jaws integrate into established clamping routines without extensive modification. The configuration is suited to general workshop, maintenance and precision toolroom environments where reliable, repeatable clamping is required. Metav Werkzeuge supports sourcing and stock availability from its European distribution centre, offering a pragmatic supply option for industry and trade customers who prioritise consistent quality and dependable lead times. The combination of practical compatibility and accessible supply reduces procurement complexity for maintenance teams and production engineers. Contact Metav Werkzeuge for stock confirmation, compatibility advice and delivery options for the Vertex VQC-160L-FJ soft jaws from our Emmerich warehouse Technical data SKU: VQC-160L-FJ GTIN: 4061905092930 ECLASS: 21029107 Facts Dimensions: 159.5×102×60 mm Weight: 7.2 kg Special features Designation: Soft jaws Application: for VQC vices Manufacturer: Vertex Gallery: technical drawing, detail image FAQ How do these jaws mount to existing VQC vices? The VQC-160L-FJ soft jaws are produced to match the mounting interface of VQC vices, allowing straightforward replacement of the vice face inserts without machining. Are these jaws suitable for protecting finished or delicate parts? Yes, the soft jaws are intended as a protective clamping surface to reduce marking and help preserve the finish of delicate components during clamping and machining. What are the exact dimensions and weight of the component? Dimensions are 159.5×102×60 mm and the weight is 7.2 kg, which supports stable clamping and predictable fitment for VQC vice faces. Can these jaws be used in a toolroom or on production benches? The design and dimensional clarity make the jaws suitable for both toolroom set-ups and general workshop production benches where protected clamping is required. Who manufactures the component and where can availability be checked? The component is manufactured by Vertex; availability and delivery options can be checked via Metav Werkzeuge and sourced from their European stock. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Durable hardened L-shaped jaws ensure consistent clamping, while the compact dimensions 159.5 x 86 x 50 mm and a weight of 3.86 kg provide stable holding for VQC-series vices; order the product directly via Metav Werkzeuge or ask our consultants if needed. VQC-160MJL Hard L-jaws for VQC vices — hardened finish, compact fit (Vertex) A set of VQC-160MJL hardened L-shaped jaws designed to provide secure, repeatable clamping for machining and workshop fixtures using VQC vices Hardened L-profile for durable clamping Precision fit for VQC series vices Compact dimensions 159.5 x 86 x 50 mm Weight 3.86 kg ensures stable holding Reliable clamping that reduces setup variation The hardened L-profile is engineered to resist wear and provide a consistently flat contact surface, which reduces movement during machining. Matched to the form factor of VQC clamping systems, the jaw set improves repeatability and reduces the need for readjustment between operations. The result is fewer rejected parts and more time spent producing rather than correcting setups. Precision seating and a hardened contact face are central to dependable holding in repetitive production tasks. Compact footprint for flexible workshop use With dimensions of 159.5 x 86 x 50 mm and a modest mass of 3.86 kg, the jaw set occupies little bench space while delivering the mass needed for vibration damping and stability. The compact design enables multi-jig arrangements and quick reconfiguration on milling or drilling benches where space is at a premium. Small tooling footprints simplify storage and allow faster changeovers, which contributes to measurable gains in workshop throughput. Simple integration and low-maintenance durability The jaw configuration is compatible with the VQC series of vices and is supplied ready for installation into matching clamping stations. The hardened finish minimises routine wear so that maintenance is limited to basic cleaning and inspection; aggressive resurfacing or complex refurbishment is seldom required. The component is identified as VQC-160MJL for straightforward procurement and inventory control, supporting smooth parts replenishment and production continuity. Contact Metav Werkzeuge in Emmerich for purchasing and technical guidance on the Vertex VQC-160MJL hardened L-jaws — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility and delivery options Technical data Article number: VQC-160MJL GTIN: 4061905088711 EClass: 21029107 Core specifications Dimensions: 159.5 x 86 x 50 mm Weight: 3.86 kg Compatibility & features Compatible with VQC series vices Hardened L-shaped jaw design Brand: Vertex FAQ What is the intended application for these jaws? The VQC-160MJL hardened L-jaws are intended for secure clamping in VQC-series vices for machining, drilling and workshop fixture work What are the exact dimensions and weight? Dimensions: 159.5 x 86 x 50 mm Weight: 3.86 kg What material are the jaws made from? The manufacturer specifies a hardened finish for the jaws; a specific base material is not stated in the product data Are these jaws compatible with other vice families? The jaw set is compatible with VQC-series vices; compatibility with other families depends on matching the mounting pattern and should be confirmed before use How should the jaws be maintained for long service life? Routine cleaning and inspection are recommended; the hardened surface reduces wear and keeps maintenance demands low Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust hardened L‑jaws deliver secure, repeatable clamping with compact dimensions and reliable mass for stable machining operations; benefit from extended tool life and straightforward retrofit to existing VQC vises. Order the component directly via Metav Werkzeuge or contact the consultants for application advice. VQC-160FJL Hardened L‑jaws for VQC vises — hardened construction, 159.5 × 86 × 50 mm VQC-160FJL is a hardened L‑jaw set engineered for VQC series vises, intended to provide durable clamping and improved workpiece support in workshop and industrial environments. Hardened construction for long wear life Compatible with VQC series vises Compact footprint 159.5 × 86 × 50 mm Stable mass at 3.78 kg for steady clamping Durable construction that reduces downtime The hardened L‑jaw design provides a wear‑resistant clamping face, delivering consistent grip and a lower rate of surface degradation under repeated use. With a focus on longevity, this component reduces the frequency of jaw replacement and associated downtime, contributing to a more efficient production flow. The hardened contact area maintains grip quality over time, while the compact footprint preserves space on the bench or machine. This combination of durability and compactness supports predictable process planning and fewer interruptions. Easy retrofit and precise alignment for VQC vises Manufactured to fit the VQC series, the L‑jaws allow direct replacement or upgrade of existing clamping equipment without complicated modifications. The geometry of the jaws is designed to ensure repeatable seating and accurate workpiece positioning, so setups are quicker and less error‑prone. Installation is straightforward, and the calibrated interface helps maintain consistent clamping force cycle after cycle. The result is improved handling for a range of parts, from simple fixtures to components that require careful orientation. Stability and surface protection for better machining results Stable mass and a workface engineered for firm contact reduce vibration and micro‑movement during machining, supporting precision results and reducing rework rates. Where softer materials are involved, the L‑jaw profile can be combined with appropriate protective layers or soft pads to prevent marring while retaining secure hold. The part’s measured dimensions — 159.5 × 86 × 50 mm — and weight of 3.78 kg contribute to a predictable clamping behaviour that benefits repeatability and finishing quality in production workflows. Contact Metav Werkzeuge for supply and technical advice on the Vertex hardened L‑jaws — reliable sourcing from Emmerich with tailored guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VQC-160FJL GTIN: 4061905094767 Manufacturer: Vertex Facts Dimensions: 159.5 x 86 x 50 mm Weight: 3.78 kg eCl@ss: 21029107 Special features Hardened L‑jaws for VQC vises Compatible with VQC series SKU: VQC-160FJL FAQ What is the primary benefit of these hardened L‑jaws? The hardened L‑jaws VQC-160FJL provide long‑term wear resistance and consistent clamping performance, improving repeatability for machining tasks. Are these jaws compatible with all VQC vise sizes? The jaws are designed for VQC series vises; fitment should be confirmed against the specific VQC model and mounting interface before purchase. Who manufactures the VQC-160FJL? The VQC-160FJL is produced by Vertex and supplied through Metav Werkzeuge for the European market. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from robust hydraulic clamping combined with a 50 kN clamping force and a wide 0–310 mm opening range for reliable, repeatable results on the shop floor. Order the vice directly via Metav Werkzeuge or consult our specialists for integration advice. VNC-160H Hydraulic machine vice — 50 kN clamping force, 0–310 mm opening (Vertex) The VNC-160H is a hydraulic machine vice engineered for precise, repeatable clamping in milling machines and machining centres. Hydraulic actuation, 50 kN clamping force Opening range 0–310 mm Accuracy to 0.01 mm Cast-iron body for vibration damping Reliable clamping for consistent machining The hydraulic actuation of the VNC-160H ensures hydraulic actuation with a steady, controllable force that reduces slippage and rework. With a rated 50 kN clamping force the vice provides a secure hold for heavy-duty operations, which translates into higher throughput and fewer interrupted production cycles. Hydraulic clamping eliminates the variability of manual tightening, so fixture repeatability is improved and cycle times are more predictable. Stable construction to reduce vibration and tool wear A cast iron body combined with a compact footprint delivers substantial mass where it matters. The vice’s overall 63 kg weight and solid construction promote vibration damping during cutting, which helps protect tool edges and improves surface finish. Stability from the vice body means less need for compensating process variables, supporting longer tool life and more consistent part quality in everyday production. Precision that supports tight tolerances Designed for precision work, the vice achieves an accuracy 0.01 mm, enabling reliable positioning for fine-detail milling and drilling. The 0–310 mm opening range accommodates a broad spectrum of workpiece sizes while maintaining clamping accuracy. For shops that measure success in repeatable tolerances, the combination of fine positional accuracy and robust clamping allows predictable results without elaborate fixturing. Straightforward integration and low maintenance Engineered as a dedicated clamping solution for machine tools, the vice offers a low maintenance approach: robust seals and a simple hydraulic interface minimise routine attention while keeping downtime low. The robust design supports retrofit into existing setups or incorporation into new machine cells; standard mounting provisions and a compact footprint ease installation planning. The vice is suited to continuous use in demanding environments where reliability and uptime are priorities. Contact Metav Werkzeuge to discuss how the VNC-160H’s 50 kN clamping force and precision design can be integrated into current production workflows — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: VNC-160H GTIN: 4061905088292 Type: Hydraulic ETIM: EC002173 Facts Opening: 0–310 mm Clamping force: 50 kN Accuracy: 0.01 mm Weight: 63 kg Dimensions: 159 x 684 x 148 mm Special features Body material: Cast iron Actuation: Hydraulic Application: Machine vice / Clamping technology SKU: VNC-160H ECLASS: 21020601 FAQ What clamping force does the vice deliver? The VNC-160H provides a clamping force of 50 kN, designed for secure holding during heavy milling and drilling operations. Is the VNC-160H suitable for high-precision work? Yes. With an accuracy of 0.01 mm the VNC-160H supports tight tolerances required in precision machining and fine finishing tasks. What are the vice’s main dimensions and weight? The vice measures 159 x 684 x 148 mm and weighs 63 kg, offering a compact yet stable platform for machining operations. Does the vice require a hydraulic supply? The VNC-160H is a hydraulic vice and requires a hydraulic actuation source; integration with a machine’s hydraulic system or an appropriate pump is necessary. What material is the vice body made from? The body is cast iron, chosen for its mass and damping characteristics that improve stability and surface finish during cutting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking advantage of the M14 threaded connection and precise fit for a 16 mm T-slot results in a secure, space-efficient clamping solution. Order the component directly via Metav Werkzeuge or consult our specialists for compatibility advice. T-Nute B3424M — T-slot nut with M14 thread, fits 16 mm slot (Vertex) T-Nute B3424M is a compact clamping insert designed for secure fastening in 16 mm T-slots on machine tables and fixtures T-slot compatibility 16 mm M14 threaded connection Compact 15.7 x 28 x 8 mm Supplied individually, ready for assembly Secure clamping that reduces setup time A well-matched clamping element reduces downtime and improves throughput on production equipment. The T-slot nut concept ensures repeatable positioning and secure load transfer when paired with an appropriate clamping bolt, while the M14 thread provides a standard interface for common clamping hardware. With a defined fit for a 16 mm T-slot, the component guarantees consistent engagement and minimises lateral play, which supports faster cycle starts and fewer rechecks during batch production. This technical reliability directly contributes to measurable efficiency gains in machining and fixturing contexts. Compact form for dense tooling arrangements Small footprint components enable denser tooling layouts without compromising stability. At 15.7 x 28 x 8 mm, the insert presents a low-profile solution that leaves more usable table area for clamps, stops and workpieces. The reduced projection is especially valuable in setups where multiple clamps share a single T-slot or when tooling must be closely spaced for short-run, mixed-batch production. By selecting a compact T-slot nut, engineers benefit from increased flexibility in fixture design and improved access for tightening tools, helping to streamline both manual and automated clamping operations. Reliable identification and supply for industrial workflows Traceable identification simplifies procurement and inventory management. The part is listed under SKU B3424M and carries GTIN 4061905088780, facilitating clear stock control and reordering. Sourced from Vertex, this insert is supplied individually, which allows ordering to match exact assembly needs and reduces surplus inventory. Metav Werkzeuge’s supply chain in Emmerich acts as a quality filter for the European market, combining broad availability with consistent delivery, so projects proceed without avoidable delays. Contact Metav Werkzeuge for specific compatibility checks or to arrange a tailored supply of Vertex components direct from our Emmerich warehouse Technical data Article number: B3424M GTIN: 4061905088780 Brand: Vertex ECLASS: 21029107 Facts T-slot width: 16 mm Thread: M14 Dimensions: 15.7 x 28 x 8 mm Special features Type: T-slot nut Supplied individually SKU: B3424M FAQ Which T-slot size does this nut fit? The T-Nute fits a 16 mm T-slot and is specified for use where that slot width is present. What thread size is provided? The component uses an M14 thread; Vertex lists this as the standard threaded interface for the B3424M. What are the external dimensions? Dimensions are 15.7 x 28 x 8 mm (L x W x H). Is the part supplied as a single item? Yes, the Vertex T-Nute B3424M is supplied individually. How is the product identified for ordering and stock? Identification: SKU B3424M, GTIN 4061905088780, ECLASS 21029107 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of reliable, compact clamping for standard 16 mm T-slots and the M12 threaded interface to secure fixtures with consistent repeatability. The combination of precise dimensions and single-piece delivery supports fast set-up and low maintenance. Order the A3424M T-slot nut directly via Metav Werkzeuge or consult our specialists for integration advice. A3424M T-slot nut – M12 thread for 16 mm T-slots (Vertex) The A3424M T-slot nut is a compact clamping element designed for use in 16 mm T-slots, providing a secure threaded interface for fixtures and accessories. M12 threaded connection Compatible with 16 mm T-slots Compact 15.7×28×8 mm form Single-piece precision delivery Faster, more secure clamping for standard T-slots Fitting directly into a 16 mm T-slot, this component provides a robust M12 thread that simplifies the attachment of clamps and modular fixturing. The small footprint and precise outer profile reduce play in the slot, which translates into less setup time and improved repeatability on machine tables. By converting a slot into a reliable threaded anchor, the element supports efficient workholding strategies and reduces secondary operations. Consistent results through precise manufacturing Manufactured as a single-piece component to tight tolerances, the element delivers consistent mechanical behaviour across repeated uses. The compact size and exact dimensions ensure predictable contact conditions and force distribution when tightened into place. This engineering approach minimises variability between setups, improving process stability and supporting higher throughput in production environments that demand repeatable clamping solutions. Simple integration into modular fixtures and tooling The combination of a standard M12 thread and compatibility with common slot widths enables straightforward integration into existing fixturing systems. Installation requires no special adapters: the nut seats into the slot and accepts standard fasteners, allowing rapid retrofitting or reconfiguration of assemblies. The design supports a modular workflow, helping maintain machine uptime while offering a practical route to upgrade clamping performance without extensive redesign. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex A3424M T-slot nut into existing fixturing setups and to discuss compatibility with specific machine tables or fixtures. Technical data Article number: A3424M Name: T-slot nut GTIN: 4061905088322 Manufacturer: Vertex Facts Dimensions: 15.7 x 28 x 8 mm T-slot compatibility: 16 mm Thread: M12 Special features Single item delivery Compact form factor Threaded interface for standard fasteners FAQ What T-slot size is this nut for? The A3424M T-slot nut is designed for a 16 mm T-slot and seats securely to provide a threaded fixing point. Which thread does the nut accept? This Vertex T-slot nut features an M12 thread, compatible with standard M12 bolts and fittings. Is the item supplied individually or in sets? The product is supplied as a single item, delivered individually for flexible purchase quantities. Can this nut be used for modular fixturing on machine tables? Yes, the component is intended as a clamping element for machine tables and modular fixturing systems where a 16 mm T-slot and an M12 threaded connection are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust workholding with a 160 mm chuck and the option of a three- or four-jaw configuration, combined with a compact 139 mm profile for bench-mounted setups, ensures accurate indexing and stable machining; order this Vertex unit directly via Metav Werkzeuge or contact our consultants for configuration advice. Vertex VSR-63 Simple Dividing Head – 160 mm chuck, three- or four-jaw The VSR-63 simple dividing head is a compact, bench-suitable indexing and workholding device designed for precise positioning and repeatable operations in toolrooms and small workshops. 160 mm chuck diameter Compatible with three- or four-jaw chucks Compact 139 mm overall height Solid 18 kg construction Precise indexing for repeatable production The dividing head delivers consistent precision for repetitive tasks, using a robust spindle and a clearly legible indexing plate to reduce setup time and minimise repositioning errors. With the 160 mm chuck as a stable workholding platform, operators benefit from accurate angular positioning across multiple operations. This measureable repeatability supports higher throughput and fewer rejected parts in series work. Compact build that fits the workshop A low overall profile of 139 mm height and a substantial 18 kg mass form a stable base that resists vibration during cuts and drilling. The compact footprint makes the device suitable for bench mounting where space is limited, while the solid construction ensures long-term mechanical stability. These attributes combine to reduce rework and increase confidence in everyday shop-floor use. Flexible workholding for varied parts Equipped for use with a three- or four-jaw chuck, the unit accommodates both irregular and cylindrical workpieces without complex changeovers. The adaptable chuck options enable secure clamping of asymmetric components as well as concentric pieces, supporting diverse tasks with a single indexing device. This versatility reduces tooling changes and streamlines mixed-production workflows. Low-maintenance and straightforward operation The simple mechanical design prioritises reliability and ease of maintenance. Routine checks and basic lubrication maintain the indexing accuracy, while the straightforward clamping arrangement keeps setup times low. For operators transitioning from basic fixtures, the device provides a clear learning curve and dependable results without elaborate service requirements. For tailored application advice or to request a quotation for the Vertex VSR-63 simple dividing head, contact Metav Werkzeuge – our specialists will advise on the optimal configuration and delivery. Technical data Article number: VSR-63 GTIN: 4061905089145 Manufacturer: Vertex Description: Simple dividing head with three- or four-jaw chuck Facts Diameter: 160 mm Height: 139 mm Weight: 18 kg eClass: 21020590 Special features Three- or four-jaw chuck compatibility Bench-compatible compact design Robust construction for reduced vibration FAQ What chuck size does the unit use? The Vertex VSR-63 simple dividing head is specified with a 160 mm chuck diameter suitable for a wide range of workshop parts. Is the VSR-63 heavy enough for stable machining? Yes, the unit’s mass of 18 kg provides a stable base that helps damp vibration during turning and drilling tasks. Can odd-shaped parts be clamped securely? The three- or four-jaw chuck options included with the Vertex VSR-63 allow secure clamping of both irregular and cylindrical workpieces. Is the device suitable for bench mounting in small workshops? The compact 139 mm overall height makes the VSR-63 well suited to bench-mounted installations where space is limited. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a compact 90° configuration that enables access to confined machining zones, combined with a 160 mm external diameter and a 2000 r.p.m. rating for steady production performance; order the unit directly via Metav Werkzeuge or contact our consultants for application advice. Vertex VRA-NT30 Right-angle Head (90°) — 160 mm, max. 2000 r.p.m. A robust VRA-NT30 right-angle head designed for NT toolholder installations, providing precise angular machining where straight spindle access is restricted. 90° right-angle configuration 160 mm external diameter Rated up to 2000 r.p.m. Compatible with NT30 bores 85.725–86 mm Increased throughput where access is limited The right-angle head design translates rotational power into productive machining in locations where a straight spindle cannot reach. With a 160 mm external diameter and a balanced mass of 13 kg, the unit maintains stability during operation while keeping a compact footprint on the machine table. The 2000 r.p.m. maximum speed is specified to preserve bearing life and deliver consistent cutting conditions; this rating supports moderate cutting feeds while reducing vibration compared with higher-speed, lower-mass adaptors. Overall, the combination of precision and controlled rotational speed results in reproducible cycle times and fewer rejects in batch runs. Straightforward integration into NT toolholder systems The head is specified for a drill-head bore of 85.725–86 mm (Type NT), enabling direct seating in standard NT30 interfaces without additional shimming when tolerances are observed. The NT30 compatibility ensures a familiar mounting procedure for workshop technicians and supports mechanical repeatability when changing setups. Because the interface is a standard industrial form, existing fixtures and clamping routines can be reused, which reduces setup time and simplifies changeovers between different jobs while preserving concentricity and axial alignment. Robust build for reliable operation Constructed for workshop use, the assembly’s mass and geometry contribute to smooth running under rated conditions; the 13 kg weight helps damp resonance and stabilise cutting forces during right-angle operations. The specified 2000 r.p.m. limit is chosen to balance cutting capacity and component longevity, ensuring bearings and seals operate within their design envelope. Regular inspection of bearing play and fastening torque, together with adherence to the speed limit, will preserve the head’s performance and reduce unplanned downtime. These design choices favour steady, predictable production rather than pushing the envelope for extreme speed. Suitable uses and basic maintenance guidance This right-angle head is particularly suited to operations requiring side-entry drilling, milling or reaming where direct spindle approach is impractical—examples include bores at an angle to the primary spindle axis and workpieces with deep or obstructed features. Before first use, verify the drill-head bore 85.725–86 mm and confirm secure clamping into the NT30 mounting. Maintenance is uncomplicated: periodic checks of mounting faces, fastener torque and bearing condition will keep the head within tolerance. Where specialised finishes or cutting data are required, pairing the head with appropriate tooling and feeds will optimise surface integrity and cycle efficiency. For reliable right-angle machining with Vertex quality, contact Metav Werkzeuge in Emmerich to discuss the VRA-NT30’s fit for existing NT30 toolholders or request technical advice via info@metav-werkzeuge.com Technical data SKU: VRA-NT30 GTIN: 4061905095221 ECLASS: 21019290 Name: Head (90°) Manufacturer: Vertex Facts Diameter: 160 mm Maximum speed: 2000 r.p.m. Weight: 13 kg Drill-head bore: 85.725–86 mm (Type NT) Special features Right-angle 90° configuration Compatible with NT30 bores Image assets: VRA-R8-main.png, VRA-R8-detail.png FAQ What is the maximum permissible speed for this right-angle head? The maximum speed for the Vertex VRA-NT30 right-angle head is 2000 r.p.m., which ensures reliable bearing life and stable machining. Which toolholder interface is required for installation? Installation requires an NT30-compatible mounting; the head is designed for a drill-head bore of 85.725–86 mm (Type NT) to ensure proper seating. How heavy is the unit and what does that mean for machine setup? The assembly weighs 13 kg; this mass contributes to run-out stability but requires correct clamping and balance checks during setup to maintain concentricity. Is the VRA-NT30 suitable for high-speed finishing operations? The VRA-NT30 is optimised for stable, moderate-speed operations up to 2000 r.p.m. and is best used where steady cutting and repeatability are priorities rather than extreme high-speed finishing. Are there images or technical views available to assess fitment? Yes, image assets for visual inspection are provided (VRA-R8-main.png and VRA-R8-detail.png) to assist in evaluating mounting and clearance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact 160 mm working diameter and a 44 mm spindle bore give a balance of versatility and precision; combined with the supplied 3-jaw chuck and multiple cover plates, setup time is reduced and repeatable indexing is ensured. Order the Vertex CC-6 directly via Metav Werkzeuge or consult our advisors for application support. Vertex CC-6 rotary indexing table — compact dividing table with 160 mm diameter and 44 mm spindle bore The Vertex CC-6 rotary indexing table is a compact, single-axis dividing table designed for precise incremental indexing and small-part machining in toolrooms and light production environments. 160 mm working diameter 44 mm spindle bore Includes 3-jaw chuck and cover plates Solid 29.5 kg construction Space-saving footprint that fits small machines and benches With external dimensions of 253 x 179 x 225 mm, the unit is engineered to occupy minimal bench space while offering stable support for small to medium workpieces. The relatively low profile and compact footprint make it suitable for integration on drill presses, milling machines and bench fixtures where space is at a premium. The modest mass of 29.5 kg contributes to steadiness under load, which reduces vibration and improves surface quality during indexing and light machining. Quick, repeatable indexing for common division tasks The dividing mechanism provides an index step of 4° per spindle revolution with a vernier reading of 20", enabling straightforward subdivision for typical workshop operations. This ratio simplifies common division tasks without complex gearing, permitting accurate angular positioning for drilling, marking and light milling. The clear division ratio and vernier allow operators to set repeatable positions quickly, increasing throughput on routine jobs where precision and speed are priorities. Flexible mounting and clamping to speed setups A 44 mm spindle bore and a 160 mm face diameter support standard mounting practices and make the table compatible with a variety of fixtures. Delivered as a set, the package contains a 3-jaw chuck and a series of cover plates (2, 3, 4, 6, 8, 12), which together reduce the need for additional clamping hardware and speed up part changes. The set format is designed to streamline workflow in small-batch production and prototyping, allowing rapid changes between clamping configurations and minimising idle time. Practical, robust design for everyday workshop use Built for dependable operation in shop conditions, the unit combines a simple mechanical design with practical dimensions to support frequent use without unnecessary complexity. The straightforward construction favours maintainability and long service life, while the included chuck and plates give immediate readiness for many common tasks. For workshops seeking a compact dividing table that integrates easily into existing equipment, this model presents a pragmatic blend of functionality and reliability. Speak to Metav Werkzeuge for application advice and to secure the Vertex CC-6 rotary indexing table with fast dispatch from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: CC-6 GTIN: 4061905083280 Set contents: 1x 3-jaw chuck; cover plates 2, 3, 4, 6, 8, 12 Facts Diameter: 160 mm Spindle bore: 44 mm Dimensions: 253 x 179 x 225 mm (L x W x H) Weight: 29.5 kg Index per spindle revolution: 4° Vernier reading: 20" Special features Compact single-axis rotary indexing table Supplied as a set for faster setup Simple design suitable for toolroom and small production FAQ How does the CC-6 achieve precise indexing for small parts? The Vertex CC-6 rotary indexing table uses a 4° spindle revolution and a vernier reading of 20" to enable accurate, repeatable angular positions suitable for drilling, marking and light milling tasks. Which clamping options are included with the table? The delivery contains a 3-jaw chuck and cover plates in sizes 2, 3, 4, 6, 8 and 12, allowing flexible clamping of round and irregular workpieces without extra accessories. What are the mounting dimensions required for installation? The table has a spindle bore of 44 mm and overall dimensions of 253 x 179 x 225 mm, which should be checked against machine spindle and fixture compatibility before mounting. Is the unit suitable for continuous production use? The Vertex CC-6 is designed for workshop and light production environments where frequent setup changes and dependable repeatability are required; its compact design and included accessories support regular use. Can the CC-6 be used on a drill press or small milling machine? Yes, the compact footprint and the 44 mm spindle bore make the dividing table suitable for integration on drill presses and small milling machines for indexing and light machining operations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a hardened jaw set that combines long wear life with precise compatibility for VQC vises; order directly via Metav Werkzeuge or ask the consultants for matching jaw options and delivery from Emmerich. VQC-160L-FJL Hardened L-Jaws for VQC Vises — Durable, Precision Fit (Vertex) The VQC-160L-FJL is a hardened L-shaped jaw engineered for secure clamping in VQC series vises, suitable for precision workshop and production applications. Hardened construction for long service life Precision fit for repeatable clamping results Compact 159.5 x 86 x 50 mm footprint Durable clamping that lowers process variability The hardened L-jaws deliver a consistently firm grip, reducing slippage and minimising rework. Thanks to their hardened construction, the jaw faces resist wear under frequent use, which preserves clamping geometry and supports repeatable setup times. For production environments where cycle stability is critical, the robust design contributes to reduced downtime and predictable part quality. The result is improved process reliability without the need for frequent replacements. Space-efficient form for tight fixtures and machines With a compact footprint of 159.5 x 86 x 50 mm and a mass of 3.78 kg, these L-jaws are designed to fit VQC-style vises where space is constrained. The L-shape enables effective vertical and horizontal clamping positions while maintaining a low profile on the workbench or machine table. This configuration allows secure holding of odd-shaped or long parts without sacrificing access for machining or inspection, supporting flexible workshop layouts and quicker changeovers. Seamless integration with VQC clamping systems Designed specifically for VQC vises, the jaw set offers accurate alignment with existing jaw mounts and the vise’s guide geometry. The precise interface reduces the need for additional shimming and simplifies replacement procedures in maintenance cycles. Where traceability and spare-part management are important, the SKU VQC-160L-FJL and the matching specification help keep inventory clear and ensure the correct part is fitted during servicing. Contact Metav Werkzeuge in Emmerich for supply and specification matching of the Vertex hardened L-jaws (SKU VQC-160L-FJL) to ensure the right configuration for the intended VQC vise application Technical data Article number: VQC-160L-FJL GTIN: 4061905094811 Manufacturer: Vertex Facts Dimensions: 159.5 x 86 x 50 mm Weight: 3.78 kg eClass: 21029107 Special features Hardened L-jaw design Compatibility: VQC series vises SKU: VQC-160L-FJL FAQ Are these jaws compatible with all VQC vises? The VQC-160L-FJL hardened L-jaws by Vertex are intended for VQC series vises; compatibility depends on the vise size and jaw-mounting pattern, so confirm the match with the SKU before ordering. What are the exact dimensions and weight? Dimensions are 159.5 x 86 x 50 mm and the weight is 3.78 kg, which supports compact installation where space is limited. What benefits does the hardened construction provide? Hardened surfaces increase wear resistance and help maintain consistent clamping geometry, which supports repeatable setups and longer service intervals for the vise jaw set. How is the part identified for ordering or stock management? Use the SKU VQC-160L-FJL and GTIN 4061905094811 for ordering and inventory; both identify the Vertex hardened L-jaws for VQC vises. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high clamping force, reliable cast-iron stability and fine accuracy to maintain uninterrupted machining cycles. Order the VNC-160FV directly via Metav Werkzeuge or consult the Metav specialists for configuration and delivery advice. VNC-160FV Hydraulic Machine Vice (Modular) by Vertex — 40 kN clamping, 0.01 mm accuracy The VNC-160FV is a modular hydraulic machine vice designed for secure workholding in medium to heavy machining applications, suitable for production and toolroom use where repeatable clamping and rigidity are required. 40 kN clamping force for secure fixturing Modular design for adaptable workholding Accuracy 0.01 mm for precision machining Cast-iron body for long-term stability Secure clamping for demanding machining The vice delivers a 40 kN clamping force provided by a hydraulic actuation system, ensuring stable fixation during milling, drilling and light heavy-duty operations. The high clamping capacity reduces part movement and vibration, improving surface finish and tool life. Built from cast iron, the unit dampens machining vibrations and offers dimensional stability under load, which supports consistent cycle times and reduced rework. Precision and repeatability where it matters With an indicated accuracy of 0.01 mm, the design focuses on repeatable positioning for batch processing and toolmaking tasks. The precision is achieved through a finely machined sliding interface and robust hydraulic control, which together reduce backlash and permit tight tolerances to be maintained across runs. For operations where small deviation can lead to scrap or additional finishing, this level of control yields measurable process savings and fewer setups. Flexible modular system for varied setups The modular concept allows rapid adaptation of the clamping layout to different workpiece formats — two standard footprint options are available: 160 x 200 mm and 160 x 280 mm. Modularity shortens changeover times and supports fixture standardisation across a shop floor, enabling efficient use of machining centres and reducing the need for bespoke jigs. The vice’s configuration versatility benefits job-shop environments and mixed-production lines requiring frequent part changes. Reliable supply and specification support from Metav Sourcing through Metav Werkzeuge brings a pragmatic logistics and quality filter for European customers: local stock management in Emmerich provides dependable availability and streamlined ordering. The combination of a stable cast-iron construction, hydraulic actuation and modularity makes the unit a sound choice for operations seeking to standardise workholding without compromising precision. For complex installations, Metav’s consultants can advise on integration with machine tables and fixture systems. Contact Metav Werkzeuge in Emmerich for tailored configuration advice and reliable delivery of Vertex hydraulic vices. Technical data Article number: VNC-160FV GTIN: 4061905089817 Manufacturer: Vertex Facts Clamping force: 40 kN Accuracy: 0.01 mm Weight: 63 kg Height: 148 mm Dimensions: 160 x 200 mm and 160 x 280 mm ECLASS: 21020601 ETIM: EC002173 Special features Material: cast iron Type: hydraulic Modular design SKU: VNC-160FV FAQ What clamping force does the vice provide? The VNC-160FV provides a clamping force of 40 kN, giving secure fixation for most milling and drilling operations. Which materials is the vice suitable for clamping? The hydraulic modular vice from Vertex is suitable for a wide range of workpieces; the cast-iron body is designed for stable clamping of metal components commonly encountered in machining. What footprint options are available for the vice? Two standard footprint options are available: 160 x 200 mm and 160 x 280 mm, enabling flexible fixture layouts for different part sizes with the VNC-160FV. How precise is the VNC-160FV in repeatable setups? The vice achieves an accuracy of 0.01 mm, providing the repeatability required for batch production and toolroom applications where tight tolerances are necessary. Is the vice suitable for integration with CNC machine tables? Yes, the modular hydraulic vice is designed for straightforward integration on machine tables; the VNC-160FV’s stability and clamping force support reliable machining cycles. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precise locating, compact design and quick integration to speed up set‑ups and reduce scrap; order the accessory directly via Metav Werkzeuge or ask our consultants for compatibility advice. L-stop — Accessory for VQC machine vises with compact 160 x 59 x 42 mm footprint (Vertex) The L-stop is a right‑angle locating stop designed to fix workpiece position for machining and inspection in VQC machine vises Compatible with VQC machine vises Compact footprint for confined setups Repeatable locating for faster set‑ups Robust construction for workshop use Faster, repeatable set-ups that cut downtime A fixed, precision locating edge provides a clear reference for successive clamping operations. By establishing a reliable datum, the accessory reduces alignment time and the likelihood of positioning errors, which in turn lowers scrap rates and rework. This effect is particularly valuable in small‑batch production or frequent job changes where setup time directly affects throughput. The result is measurable time saving and an immediate improvement in process consistency thanks to repeatability. Compact, workshop‑ready design for constrained fixtures Engineered for use where space is limited, the accessory’s 160 x 59 x 42 mm footprint and modest mass make it straightforward to add to existing fixturing without heavy modification. The compact dimensions and 1.55 kg mass maintain a low centre of gravity for stable clamping while minimising interference with tool paths and inspection probes. A compact locating stop is beneficial where multiple clamps must share table space, enabling denser, more efficient workholding layouts that keep the machine cycle moving. Seamless integration with VQC vises to improve workflow Designed specifically for integration with VQC machine vises, the accessory (SKU VQC-160FPM) fits into common vice setups to provide a dependable right‑angle stop for repeat operations. Quick alignment and straightforward mounting reduce installation overhead so operators can return to production faster. Backed by Vertex manufacturing standards and supplied through Metav’s quality filter in Emmerich, the component supports reliable, long‑term operation and helps maintain consistent output across shifts. For workshop applications that demand consistent locating and quick integration, contact Metav Werkzeuge in Emmerich to discuss Vertex compatibility and to arrange purchase or tailored advice. Technical data Article number: VQC-160FPM GTIN: 4061905092473 Manufacturer: Vertex Facts Dimensions: 160 x 59 x 42 mm Weight: 1.55 kg eClass: 21029210 SKU: VQC-160FPM Special features Accessory for VQC machine vises Precise L-shaped locating stop Compact footprint for confined setups FAQ Is this accessory compatible with VQC machine vises? Yes. The L-stop is intended for use with VQC machine vises and provides a right‑angle locating function compatible with standard VQC setups. What are the exact dimensions and weight? Dimensions are 160 x 59 x 42 mm and the unit weighs 1.55 kg, making it suitable for compact fixturing arrangements. Can this locating stop improve batch‑to‑batch consistency? Yes. The L-stop delivers repeatable positioning which reduces setup variation and helps maintain consistent machining results across batches. Who manufactures the product and what is the SKU? The accessory is manufactured by Vertex and sold as SKU VQC-160FPM, ensuring production standards consistent with Vertex machine accessories. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine compact dimensions, a stable mass and precise locating to improve set-up repeatability; order the VQC-160FPF L-stop directly via Metav Werkzeuge or consult our advisors if further clarification is required. VQC-160FPF L-stop for VQC vises — 160 x 59 x 42 mm, 1.55 kg The VQC-160FPF L-stop is an L-shaped positioning stop designed to provide repeatable workpiece locating for Vertex VQC vises in precision machining and assembly environments. Compact 160 x 59 x 42 mm form factor Designed for Vertex VQC vises Precise repeatable positioning Weighs 1.55 kg for stable clamping Consistent locating for repetitive machining The L-stop delivers a straightforward way to achieve precision in repetitive clamping operations. By providing a fixed datum against which workpieces are presented, the accessory reduces variation between set-ups and shortens the time spent aligning parts. The result is improved process reliability: fewer dimension faults, less reworking and a predictable production flow. For workshops that run short batches or frequent changeovers, the clear benefit is higher throughput with maintained quality. Space-saving integration with existing vises The accessory has a compact footprint of 160 x 59 x 42 mm and a mass of 1.55 kg, which helps to stabilise the clamping arrangement without occupying excessive bench space. Its geometry is tailored to fit Vertex VQC vises, enabling straightforward mounting and alignment within standard clamping fixtures. Because the stop is purposely dimensioned for these vises, planning for fixture layout is simplified and the accessory integrates with existing workflows rather than requiring bespoke adapters. Practical gains for workshop efficiency Adopting a fixed stop reduces set-up complexity and supports faster cycle starts. The simple mechanical principle—providing a reliable edge against which a component is presented—translates into measurable time savings at the machine or bench. The accessory encourages uniform handling, which in turn supports traceability and makes quality checks more consistent. A technical drawing and imagery are available to assist in fixture planning and to confirm compatibility during purchase planning. Contact Metav Werkzeuge today to discuss how the VQC-160FPF L-stop can be integrated into existing clamping setups and to request detailed planning information or ordering support from our consultants Technical Data Article number: VQC-160FPF GTIN: 4061905089718 ECLASS: 21029210 Type: L-stop for VQC vises Manufacturer: Vertex Core measurements Dimensions: 160 x 59 x 42 mm Weight: 1.55 kg Special features Compatibility: for Vertex VQC vises Assets available: product images and technical drawing FAQ What is the primary purpose of this L-stop? The L-stop provides a fixed locating edge for repeatable positioning of workpieces when used with Vertex VQC vises, improving set-up consistency. Will this accessory fit other vise models? The L-stop is designed specifically for use with Vertex VQC vises; compatibility with other makes requires dimensional comparison using the supplied technical drawing. How does the L-stop affect set-up time? By offering a repeatable datum, the accessory reduces alignment effort and shortens set-up time, supporting faster changeovers and more consistent output. Is there a technical drawing to support fixture planning? Yes, a technical drawing and detailed images are available to assist integration and ensure the L-stop matches planned fixture arrangements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine the 3‑jaw self‑centring design with a 160 mm nominal diameter and reversible operation to increase clamping reliability and reduce setup time; order via Metav Werkzeuge or consult the technical team for application advice. VSK-6A Spannfutter – 3‑jaw self‑centring reversible chuck (Vertex) A robust VSK-6A chuck for secure workholding in industrial and workshop lathe applications, designed for repeatable clamping and flexible operation 3‑jaw self‑centring mechanism Reversible operation for flexible use 160 mm nominal diameter for heavy work M8 threaded mounting for stable attachment Faster set‑up and consistent concentricity for production workflows The 3‑jaw arrangement of this workholding device ensures rapid clamping and repeatable concentricity, which reduces downtime between jobs. The self‑centring mechanism is engineered so that the jaws close uniformly, making it suitable for batch work where consistent runout is essential. The combination of the chuck’s mass and geometry contributes to dampening of vibration; this improves surface finish and prolongs tool life when machining demanding components. Easy integration with common lathe spindles and fixtures Mounting is straightforward thanks to the 3xM8 threaded interface, allowing secure attachment to compatible spindle faces or adaptors. The nominal 160 mm diameter provides a broad throat for larger stock, while the compact 95 mm height keeps the centre of gravity low for stable rotation. These measurable characteristics make the component easy to specify in procurement documents and straightforward to compare with alternative clamping systems. Versatile operation and handling that support shop flexibility Reversible functionality expands the chuck’s range of applications, enabling both standard and inverted clamping operations without additional tooling. At a mass of 8.3 kg, the chuck delivers the stability expected in heavier turning operations while remaining manageable for routine mounting and removal. Regular inspection and basic maintenance—cleaning of jaw guides and lubrication of the drive mechanism—are sufficient to keep the unit performing reliably over time. Practical benefits and recommended applications As a purpose‑built clamping solution, this device is suitable for general turning, facing and light heavy‑duty work where a fast, secure grip is required. The design prioritises throughput: shorter clamping cycles and reliable repeatability translate directly into higher overall productivity. For component batches requiring repeated centring and fast changeovers, the chuck provides a clear operational advantage and can be specified with confidence in engineering documentation. For precision clamping with proven repeatability choose the Vertex VSK-6A and contact Metav Werkzeuge for tailored application guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VSK-6A GTIN: 4061905083976 Brand: Vertex Dimensions / measurable data Diameter: 160 mm Height: 95 mm Weight: 8.3 kg Thread: 3xM8 eCl@ss: 21020590 Features / mounting 3‑jaw configuration Self‑centring operation Reversible function Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/c0/2f/97/63/63972fc0c806fb82109e36c8/VSK-6A-main.png FAQ Is this chuck compatible with standard lathe spindles? Compatibility depends on the spindle face and adaptor; the VSK-6A mounts via a 3xM8 threaded interface and is designed for integration with commonly used adaptors and mounting plates. What level of concentricity can be expected from the three‑jaw system? The three‑jaw self‑centring design of the VSK-6A provides repeatable concentricity suitable for general turning and batch production where consistent runout is required. Can the chuck be used inverted or for back‑mounting? Yes, the reversible operation allows inverted mounting and alternative clamping orientations without additional specialised tooling. How heavy is the chuck and what does that imply for handling? With a mass of 8.3 kg, the chuck offers good damping for improved machining stability; routine handling requires standard lifting precautions and secure fastening to the spindle. Are there special maintenance requirements? Basic maintenance—periodic cleaning of jaw guides and light lubrication of moving parts—is recommended to preserve performance of the VSK-6A and extend service life. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking advantage of 6000 kgf clamping force and 0.01 mm accuracy, this pneumatic precision machine vise delivers repeatable holding and reduced cycle times for series machining. Fast pneumatic actuation and robust cast‑iron construction ensure long service life and stable clamping. Order or discuss specification details directly via Metav Werkzeuge or consult available product specialists. VMC-6P — Vertex pneumatic precision machine vise with 6000 kgf clamping force The VMC-6P is a pneumatic precision machine vise designed for secure, repeatable clamping in milling and machining applications, with a 0–160 mm jaw opening. Pneumatic actuation for fast cycles 6000 kgf maximum clamping force 0–160 mm adjustable jaw opening Cast iron body for damped stability Consistent precision to keep production on target The VMC-6P delivers a declared accuracy of 0.01 mm, providing the repeatability required for batch machining and quality‑critical operations. This degree of precision helps reduce rework and inspection time, so process throughput improves without compromising dimensional control. Pneumatic actuation shortens cycle time between setups while the measured clamping output maintains consistent part seating for automated sequences. Durable construction that supports daily machining loads A cast iron body ensures inherent vibration damping and stable thermal behaviour during extended use. With overall dimensions of 160 x 540 x 163 mm and a mass of 48 kg, the unit offers the rigidity expected for medium‑duty machine tools. The 0–160 mm jaw opening accommodates a broad range of workpieces, and the high 6000 kgf clamping capacity secures components reliably during milling, drilling and finishing operations. Maintenance is minimal; pneumatic actuation reduces mechanical wear compared with purely mechanical systems. Easy integration into automated cells and CNC systems Pneumatic control simplifies interfacing with existing air systems and PLCs, allowing the vise to be incorporated into CNC workstations and loading stations with predictable response times. The combination of robust clamping force and fine positional stability supports consistent process quality and short setup intervals. Specification details such as SKU VMC-6P and GTIN are available for procurement and traceability, aiding inventory and quality documentation. Discuss integration and specification with Metav Werkzeuge—call +49 2822 7131930 or email info@metav-werkzeuge.com to arrange technical clarification for the Vertex VMC-6P Technical data SKU: VMC-6P GTIN: 4061905093340 Manufacturer: Vertex Facts Opening: 0–160 mm Clamping force: 6000 kgf Accuracy: 0.01 mm Weight: 48 kg Dimensions: 160 x 540 x 163 mm Type: Pneumatic Special features Cast iron construction Pneumatic actuation Precision machining vise Model: VMC-6P FAQ What level of accuracy can be expected from this machine vise? The VMC-6P is specified with an accuracy of 0.01 mm, which supports tight tolerances and repeatable positioning in series production. Which jaw opening does the vise cover and what workpiece sizes are suitable? The unit provides a 0–160 mm jaw opening, making it suitable for small to medium components commonly processed on milling and machining centres. How much clamping force does the vise deliver and what does that mean for machining? With a clamping force of 6000 kgf, the VMC-6P secures workpieces against heavy cutting forces, reducing movement and improving surface finish consistency. What material is the vise body made from and why is that beneficial? The body is made from cast iron, which offers vibration damping and dimensional stability under thermal load, supporting repeatable machining accuracy. Is the VMC-6P suitable for automated CNC cells? Yes, the pneumatic actuation and robust design of the Vertex VMC-6P are intended for integration into automated cells and CNC workstations where fast, repeatable clamping is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of robust clamping performance, compact construction and precise repeatability to keep machining cycles efficient and reliable; the high clamping force and controlled opening enable stable setups for demanding workpieces. Order the vice directly via Metav Werkzeuge or consult the team for application advice. VMC-160HVL – Precision machine vice, mechanical and hydraulic drive, Vertex The VMC-160HVL is a power-enhanced, compact precision machine vice engineered for secure clamping on milling machines and machining centres in industrial workshops. 5000 kgf clamping force for secure holding Opening range 0–350 mm for versatile workpieces Cast iron body for vibration damping and stability Accuracy 0.01 mm for repeatable machining results Consistent clamping for higher throughput The vice delivers a clamping force that keeps heavy or irregular parts stable during machining. With a rated 5000 kgf, the device reduces micro-movement under load, which translates into fewer reworks and shorter cycle times. The robust cast structure absorbs cutting vibrations, supporting better tool life and surface finish. For production environments seeking measurable efficiency gains, the mechanical‑and‑hydraulic arrangement provides both the speed of mechanical actuation and the controlled pressure of hydraulic systems, combining rapid setup with reliable holding power. Flexible opening to suit diverse setups An opening range of 0–350 mm allows the vice to accommodate a wide variety of components without frequent tool changes. The adjustable span simplifies job planning in mixed-batch production and reduces downtime between setups. The compact footprint and stated dimensions ensure the vice fits into constrained table space while still handling larger clamps when required. This balance of range and compactness supports flexible cell design and easier fixturing on vertical machining centres. Built from cast iron for stability and precision Constructed from cast iron, the vice offers inherent damping and long-term dimensional stability under thermal and mechanical stress. The material choice supports consistent results across extended runs and contributes to the stated accuracy of 0.01 mm, a level suitable for precision engineering tasks. For operators less familiar with material properties: cast iron reduces resonant vibration during cutting, which helps retain tight tolerances and improves the finish quality of machined surfaces. Simple integration and maintenance for continuous operation Weighing 75 kg and dimensioned at 160 x 740 x 168 mm, the unit is sizeable yet manageable for most workshop installations. The compact, power‑enhanced design minimises interference with other tooling while offering substantial holding capability. Routine maintenance focuses on lubrication points and periodic inspection of the hydraulic/mechanical interface, keeping service effort straightforward and predictable. Should specification alignment or mounting advice be required, Metav Werkzeuge provides technical guidance by email or phone to ensure smooth integration into existing workflows. Contact Metav Werkzeuge for application guidance and secure the Vertex VMC-160HVL for reliable high‑force clamping in production environments Technical data SKU: VMC-160HVL GTIN: 4061905092527 ETIM: EC002173 eCl@ss: 21020601 Facts Opening: 0–350 mm Clamping force: 5000 kgf Accuracy: 0.01 mm Weight: 75 kg Dimensions: 160 x 740 x 168 mm Special features Material: cast iron Type: mechanical and hydraulic Designation: precision machine vice Description: power-enhanced and compact Brand: Vertex FAQ What machines is this vice suitable for? The vice is designed for use on milling machines and machining centres; the Vertex VMC-160HVL combines mechanical speed with hydraulic control to suit both manual and CNC setups. How does the 5000 kgf clamping force affect machining? A clamping force of 5000 kgf ensures workpieces remain firmly held under cutting loads, improving stability and reducing the risk of movement that would compromise accuracy with the VMC-160HVL. Is the vice suitable for precision work? Yes; the vice achieves an accuracy of 0.01 mm, and the cast iron construction supports repeatable precision for demanding machining tasks. What maintenance is required to keep performance consistent? Regular lubrication and inspection of the mechanical and hydraulic interfaces will maintain performance; basic upkeep preserves the accuracy and longevity of the Vertex vice. Can the vice accommodate large or irregular parts? The 0–350 mm opening range is designed to handle a broad spectrum of part sizes, enabling flexible fixturing for irregular and larger components with the VMC-160HVL. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking advantage of a compact footprint, solid build and proven mounting standard delivers reliable and repeatable indexing for medium‑sized workpieces; combine precision indexing with a robust design to reduce set‑up time and rework. Order the BS-1 directly via Metav Werkzeuge or ask our consultants if needed. BS-1 Dividing Head – Semi‑Universal, 160 mm, MT‑3 The BS-1 is a semi‑universal dividing head designed for precise angular indexing and controlled rotation of workpieces on milling machines and similar equipment. Semi‑universal design for versatile indexing 160 mm capacity for medium-sized workpieces MT‑3 spindle taper for common machine spindles Compact footprint: 230×205×220 mm Accurate indexing that improves throughput The dividing device offers precision indexing for operations where angular accuracy matters, such as gear cutting, slotting and patterned drilling. With a 160 mm working diameter and a firm MT‑3 taper for mounting, the unit provides a stable axis for rotary tasks, reducing the risk of drift during machining. By converting manual rotational steps into defined, repeatable positions, the head helps maintain part tolerances and shortens cycle times, which directly benefits production reliability and reduces scrap rates. The design supports consistent results on repetitive tasks while keeping set‑up requirements straightforward. Stability and durability for everyday workshop use Designed as a semi‑universal solution, the unit combines functionality with a robust construction that resists vibration during cutting. The substantial mass (approx. 32 kg) contributes to steadiness and improved surface finish when performing indexing or light rotary machining. Its compact footprint (230×205×220 mm) fits onto most machine tables without monopolising space, enabling efficient use of work area. The solid build reduces the need for frequent readjustment and supports longer tool life through lower chatter and better clamping stability. Simple integration and reduced set‑up time Mounting is via an MT‑3 taper, a widely used standard that ensures rapid fitting to compatible spindles and fixtures. The semi‑universal configuration allows basic single‑axis indexing as well as more advanced dividing tasks when used with appropriate attachments, offering a balance between flexibility and ease of use. Clear mechanical indexing steps translate technical capability into practical benefits: faster alignment, reproducible angles and fewer interim measurements. Backed by Vertex engineering, this device is suitable where dependable, repeatable rotation is required without complex electronics. For tailored technical advice or to arrange supply through Metav Werkzeuge in Emmerich (email info@metav-werkzeuge.com or phone +49 2822 7131930), contact Metav Werkzeuge to discuss the Vertex BS-1 semi‑universal dividing head and its fit in the production workflow Technical Data SKU: BS-1 GTIN: 4061905086960 Manufacturer: Vertex ECLASS: 21020590 Core Specifications Diameter: 160 mm Mounting taper: MT-3 Dimensions: 230×205×220 mm Weight: 32 kg Design & Features Semi‑universal dividing head Compact, robust construction Suitable for indexing and rotary machining tasks FAQ What is a semi‑universal dividing head and how does it differ from a simple indexer? A semi‑universal dividing head allows both direct indexing and more advanced dividing operations using additional settings; the BS-1 combines straightforward indexing with options for more complex angular subdivision, offering greater flexibility than a simple fixed indexer. Which machines are compatible with the BS-1 mounting? The BS-1 fits machines and fixtures that accept an MT‑3 taper; this common standard enables straightforward integration with milling machines and similar equipment that provide MT‑3 receptacles. How does the weight of the device affect machining performance? The approximately 32 kg mass improves stability and damping during cutting, which reduces vibration and improves surface finish when using the Vertex dividing head for indexing and rotary tasks. Is the 160 mm diameter a limitation for certain workpieces? A 160 mm working diameter accommodates many medium‑sized components; for larger workpieces other models or additional fixturing may be required depending on the specific application. Does the BS-1 require electronic control to achieve precise angles? No; the BS-1 provides mechanical indexing and controlled rotation. It is designed for repeatable manual or mechanically guided angular positioning without mandatory electronics. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a combination of flexible indexing, secure workholding and a standard MT‑3 interface that supports reliable, repeatable machining operations; these attributes support smoother production flows and predictable set‑ups. Order the dividing head BS-1-J-6 directly via Metav Werkzeuge or ask our consultants if needed. Dividing Head BS-1-J-6 — Semi-Universal with 6" Chuck (Vertex) A Dividing Head BS-1-J-6 that provides precise angular indexing and secure workholding for versatile machining and milling tasks. Semi‑universal dividing head design 6" chuck included for secure clamping MT‑3 mounting interface for standard machines 160 mm spindle diameter for stable support Versatile indexing for a wide range of tasks The semi‑universal layout of this indexing device allows a variety of angular and repetitive operations while keeping set‑up times low. The integrated 6" chuck offers immediate clamping for cylindrical and irregular workpieces, removing the need for additional adapters in many cases. With a MT‑3 mounting arrangement, the head connects to commonly used machine spindles and tailstocks, ensuring compatibility with existing tooling concepts. This combination delivers a practical balance between flexibility and operational efficiency, helping to maintain throughput without compromising on positioning capability. Stable support that improves machining quality A spindle diameter of 160 mm and overall mass of 42 kg contribute to a steady working platform that resists chatter and vibration during cutting. Reduced vibration translates into improved surface finish and more consistent results across repeated cycles. The physical mass of the unit assists in load absorption during tougher cuts, offering a tangible advantage for tasks where dimensional consistency matters. These characteristics make the head suitable for precision indexing and for operations where mechanical stability enhances final quality. Straightforward integration and set‑up in the workshop The design supports rapid mounting and straightforward alignment procedures thanks to the MT‑3 interface and familiar workholding connection. The semi‑universal configuration facilitates both simple division tasks and more complex angular indexing when used with dividing plates or accessories. Clear, durable features reduce the need for frequent readjustment, supporting a rational workflow that prioritises uptime and predictable output. For workshops seeking dependable indexing capability, this dividing head is a pragmatic choice that ties into established machine tool standards. Built for repeatable performance and shop productivity By combining a practical chuck size with a standard taper mount and a substantial spindle diameter, the unit is geared towards repeatable set‑ups and efficient changeovers. The configuration supports a structured approach to task planning: set once, run many. Where predictable cycle times and consistent part quality are priorities, the head helps streamline processes while allowing technicians to focus on value‑adding adjustments rather than constant fixturing. This contributes directly to productivity gains over routine production runs. Contact Metav Werkzeuge in Emmerich for tailored technical advice and ordering of the BS-1-J-6 dividing head; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BS-1-J-6 GTIN: 4061905088896 Manufacturer: Vertex Machinery Works Co., Ltd. Model: Semi‑Universal dividing head Special feature: with 6" chuck Mounting: MT‑3 Facts Spindle diameter: 160 mm Weight: 42 kg Special features Semi‑Universal design 6" chuck included MT‑3 mounting eClass: 21020590 FAQ What types of operations is this dividing head suitable for? The dividing head BS-1-J-6 from Vertex is designed for angular indexing, repetitive division and general workholding tasks on suitable milling and machining equipment. Which mounting interface does the unit use and why does it matter? The unit uses an MT‑3 mounting interface; this standard taper ensures straightforward attachment to compatible machine spindles or tailstocks and simplifies integration into existing setups. What does the included 6" chuck allow in practical terms? The supplied 6" chuck permits direct clamping of cylindrical and irregular workpieces, reducing the need for extra fixtures and accelerating the set‑up process when using the BS-1-J-6. How does the weight and spindle diameter affect machining? A spindle diameter of 160 mm combined with a mass of 42 kg gives a stable platform that helps to minimise vibration, improving surface finish and repeatability for the produced parts. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan