Ausstattungen für Fräsmaschinen

Take advantage of the combination of 150 ft-lb torque, high rotational speed and robust 9.8 kg construction for consistent throughput in assembly operations; order directly via Metav Werkzeuge or consult the Metav team for application advice. Pneumatic Pull Rod PD-150-R8 — 150 ft-lb torque · 3,000 rpm · Vertex The Pneumatic Pull Rod PD-150-R8 is a compact pneumatic tensioning and fastening tool designed for industrial assembly tasks that demand controlled torque and rapid cycle rates. 150 ft-lb maximum torque Up to 3,000 rpm operational speed Operates at 90 psi (6.3 kg/cm²) Robust 9.8 kg construction Optimised throughput with measurable performance The PD-150-R8 delivers a rated 150 ft-lb of torque combined with a peak rotation of 3,000 rpm, which translates into faster cycle times on repetitive fastening or tensioning operations. Torque is the rotational force applied at the drive output; higher torque reduces the number of passes needed on stubborn fastenings and shortens overall process time. The combination of controlled torque and elevated speed makes the unit suitable for workshop lines where consistency and repeatability are required, helping to reduce downtime related to under- or over-tightening. Designed for reliable pneumatic operation and safety Built for pneumatic supply at 90 psi / 6.3 kg/cm², this tensioning tool uses compressed air to produce its drive output, avoiding reliance on mains-only power. The model accepts AC 110V or 220V for ancillary electronics and DC 24V where low-voltage control is required, enabling flexible integration with existing control systems. At 9.8 kg, the structure balances heft for stability with manageable handling during fixture changes; mass contributes to smooth torque delivery and reduces vibration transfer to adjacent components. Practical integration in assembly and maintenance workflows The PD-150-R8 is suitable for a range of industrial assembly tasks, from production-line fastening to maintenance where a controlled pneumatic drive is preferred. The supply variants and compact footprint facilitate integration into existing rigs and jigs. For users less familiar with pneumatic specifications, psi denotes pounds per square inch of air pressure, and matching compressor capability to the stated 90 psi ensures the tool reaches its rated performance without pressure drop. The solid build and clear performance metrics simplify process planning and spare parts forecasting. Contact Metav Werkzeuge in Emmerich for tailored procurement and technical guidance on Vertex pneumatic tools; email info@metav-werkzeuge.com or call +49 2822 7131930 for application-oriented advice and delivery options Technical data SKU: PD-150-R8 GTIN: 4061905084430 Brand: Vertex ECLASS: 23309104 Performance data Torque: 150 ft-lb Speed: 3,000 rpm Air pressure: 90 psi / 6.3 kg/cm² Weight: 9.8 kg Supply voltage: AC 110V or 220V; DC 24V Special features Pneumatic operation High rotational speed for fast cycles Robust construction for industrial use Product images available in gallery FAQ What torque and speed does the tool provide? The Pneumatic Pull Rod PD-150-R8 delivers 150 ft-lb of torque and operates up to 3,000 rpm, suitable for high-throughput fastening and tensioning tasks. Which air pressure is required for optimal performance? Optimal operation of the PD-150-R8 is specified at 90 psi (6.3 kg/cm²); maintaining this supply prevents performance loss due to pressure drop. Can the unit be integrated with existing voltage systems? Yes; the PD-150-R8 accepts AC 110V or 220V for auxiliary functions and DC 24V for low-voltage control interfaces. Is the tool suitable for continuous assembly-line use? The robust design and rated torque make the PD-150-R8 suitable for continuous industrial assembly cycles where pneumatic drive is preferred. What is the model identifier for ordering spare parts? Order and spare parts references use SKU PD-150-R8 and the GTIN 4061905084430 for accurate identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of high, consistent torque and rapid rotary speed to speed up assembly cycles while retaining reliable pneumatic operation; order the unit directly via Metav Werkzeuge or consult the team for application support. Pneumatic Pull Rod PD-150-NT30 – 150 ft·lb torque, 3,000 rpm (Vertex) The Pneumatic Pull Rod PD-150-NT30 is an air-driven tensioning and torque-transmission tool intended for industrial assembly and clamping tasks, combining robust torque with flexible power options for integration into production lines. 150 ft·lb torque output Up to 3,000 rpm operating speed Operates at 90 psi / 6.3 kg/cm² Flexible supply: AC 110V/220V or DC 24V Faster, repeatable fastening through measurable torque control The PD-150-NT30 delivers a rated 150 ft·lb of torque at up to 3,000 rpm, making it suitable where consistent torque application shortens cycle times and reduces rework. The combination of high torque and rotary speed supports efficient tightening or tensioning steps in assembly sequences; the measurable torque output gives a clear, objective basis for process planning and quality assurance. In practice, this translates into fewer manual corrections, faster throughput and reproducible joint strength across batches. Air operation and electrical compatibility for easy integration Configured for an air pressure of 90 psi / 6.3 kg/cm², the unit runs on standard shop compressed air systems and can be controlled or monitored via its available supply options: AC 110V or 220V and DC 24V. This dual electrical compatibility allows integration with a wide range of control systems and PLC interfaces, simplifying retrofit into existing lines. Because pneumatic actuation is inherently safe under heavy-duty duty cycles, the tool offers sustained performance without overheating during repetitive production runs. Robust build and practical workshop handling With a mass of 9.8 kg, the unit balances portability with build solidity for frequent use in a production environment. The compact, purpose-built design supports straightforward mounting and alignment in clamping or assembly fixtures, while the measured torque and rotary capability provide the stability required for repeatable processes. The PD-150-NT30’s combination of weight and mechanical output reduces vibration transfer to fixtures, contributing to longer service intervals and predictable maintenance scheduling. Contact Metav Werkzeuge for tailored integration advice or to request the PD-150-NT30 from Metav Werkzeuge for fast delivery from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: PD-150-NT30 GTIN: 4061905092060 eClass: 23309104 Core specifications Torque: 150 ft·lb Speed: 3,000 rpm Air pressure: 90 psi / 6.3 kg/cm² Weight: 9.8 kg Supply voltage: AC 110V or 220V; DC 24V Features and manufacturer Manufacturer: Vertex Category: Vertex product line SKU: PD-150-NT30 FAQ What torque range does the unit provide? The unit provides a rated torque of 150 ft·lb, offering a measurable and repeatable output suitable for industrial fastening and tensioning tasks. Which air and electrical supplies are required? The tool operates at 90 psi / 6.3 kg/cm² and accepts AC 110V or 220V or DC 24V for control or monitoring connections. Is the PD-150-NT30 suitable for continuous production use? Yes, the design and pneumatic drive make the PD-150-NT30 appropriate for repetitive cycles; the combination of torque and rotary speed supports sustained operation with predictable maintenance intervals. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of adjustable height 0–150 mm, a secure M24 mounting pin and compact dimensions for reliable clamping in confined workspaces. Order the clamp directly via Metav Werkzeuge or consult our technical advisors for a fast fit to existing fixtures. VCA-408 clamp by Vertex — adjustable 0–150 mm, M24 pin The VCA-408 is a compact clamp available in a U‑shape or as a rotatable version, designed for flexible workholding in confined workshop and fixture applications. *Adjustable height 0–150 mm for versatile clamping *M24×8" mounting pin for secure attachment *Compact dimensions 190×70×65 mm for tight spaces *Available in U‑shape or rotatable version Reliable clamping for compact setups The clamp delivers a dependable hold through its adjustable height mechanism, which permits fine adjustment within the 0–150 mm range to match varying workpiece profiles. With compact dimensions of 190×70×65 mm and a mass of 8.2 kg, the unit occupies little bench space while providing stable contact pressure. The combination of precise height control and a low centre of gravity reduces repositioning time and helps maintain consistent alignment during machining or inspection tasks, resulting in fewer setup iterations and improved throughput. Flexible configurations that reduce setup time Available in both U‑shape and rotatable configurations, the workholding solution allows adaptation to different clamping scenarios without replacing the base fixture. The rotatable version enables angular repositioning for non‑standard parts, while the U‑shape provides straightforward lateral access for bars and profiles. This modularity shortens changeover intervals and supports a more efficient workflow in mixed production runs, making the component suitable for small batch series and frequent product changes. Integration with common workshop fixtures The clamp uses a robust M24 pin for attachment, ensuring secure clamping and compatibility with many standard fixture plates and clamping towers. The specification of the mounting interface supports consistent repeatability when relocating the clamp between machines or workstations. Fabrication and inspection environments benefit from the secure mechanical interface, which minimises micro‑movement under load and contributes to higher measurement and machining accuracy across repeated cycles. Built for dependable everyday use Constructed for hands‑on workshop environments, the device balances sturdiness with manageable handling, enabling safe repositioning and rapid installation. The compact footprint encourages placement close to the workpiece, reducing lever‑arm effects and vibration transmission. Combined with straightforward geometry options, the design aims to provide a practical, low‑maintenance clamping solution that supports steady production flow and reduces unexpected stoppages. Contact Metav Werkzeuge in Emmerich for personalised advice on the VCA-408 clamp and guidance on integration with existing fixtures and delivery from our central European stock Technical Data SKU: VCA-408 GTIN: 4061905094590 ECLASS: 21049022 Facts Dimensions: 190×70×65 mm Weight: 8.2 kg Adjustable height: 0–150 mm Special features Versions: U‑shape or rotatable Mounting: M24×8" pin Product type: clamp FAQ What is the adjustable height range of the clamp? The VCA-408 clamp (Vertex) offers an adjustable height range of 0–150 mm for flexible positioning of different workpiece profiles. Which mounting interface does the clamp use? The clamp uses an M24 mounting pin for secure attachment; the M24 interface ensures stable connection to common fixture plates and clamping towers. What versions of the clamp are available? Available versions include a U‑shape model and a rotatable model, enabling either lateral access or angular positioning for diverse workholding tasks. Is the clamp suitable for tight or confined workspaces? Yes, with compact dimensions of 190×70×65 mm and a manageable weight of 8.2 kg, the VCA-408 by Vertex is designed for use in restricted setups and close‑quarter fixture arrangements. Can the clamp be moved between workstations without losing repeatability? The robust mounting and secure attachment of the VCA-408 clamp support reliable repeatability when transferred between compatible fixtures and workstations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a compact, robust clamping solution that combines a standard M12x1.75 thread with heat-treated steel construction for consistent holding power and long service life; order directly via Metav Werkzeuge or consult our specialists for application advice. Vertex Clamping Screw 1346M — M12x1.75 thread, Heat-treated Steel The Vertex Clamping Screw 1346M is a precision clamping component designed to secure workpieces and fixtures in light industrial and workshop settings. M12x1.75 thread for standard fittings Heat-treated steel for high durability Lightweight design at 0.11 kg Secure, repeatable clamping for fixture work Engineered for repeatability, the M12x1.75 thread provides compatibility with widely used fixtures and insertions, reducing the need for custom adaptors. The robust heat-treated steel construction resists deformation under clamping loads, which preserves precision over many cycles and minimises downtime from component replacement. By selecting a standard thread form and hardened material, maintenance intervals are extended and the likelihood of rework due to slippage is lowered, supporting a more efficient production flow. Compact design that improves handling and setup speed The compact form and 0.11 kg mass of the component make it a practical choice where operator handling and quick set-ups matter. A lower mass combined with a standard thread means faster manual adjustments and reduced operator fatigue during repetitive tasks. Where rapid changeovers are required — for example on jigs or modular fixturing — the small footprint of the clamping hardware helps keep the work area organised and accessible, contributing to measurable time savings on assembly and inspection stages. Specified quality and practical sourcing for workshops Manufactured to consistent tolerances, the component reflects Vertex’s focus on reliable mechanical behaviour in everyday production. The simple geometry and known material properties allow straightforward selection for applications where hardness and wear resistance are priorities. If questions arise about compatibility with a specific fixture or material, technical clarification can be obtained quickly to ensure the chosen component meets the required clamping force and environmental conditions without unnecessary over-specification. Discuss application requirements with Metav Werkzeuge in Emmerich — call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com to confirm suitability and availability. Technical data Article number: 1346M GTIN: 4061905088513 Brand: Vertex Facts Length: 150 mm Weight: 0.11 kg ECLASS: 21022190 Special features Thread: M12x1.75 Material: Heat-treated steel Product type: Clamping screw FAQ What thread does the clamping screw use? The clamping screw is specified with an M12x1.75 thread and is compatible with standard M12 fittings. What material and treatment are used for the component? The part is manufactured from heat-treated steel, chosen to provide enhanced wear resistance and stable clamping performance. Is the clamping screw suitable for quick manual handling? Yes — the lightweight construction (approx. 0.11 kg) and compact design make the component appropriate for manual set‑ups and frequent changeovers. How can the Vertex Clamping Screw 1346M be sourced for workshop use? Stock and delivery details for the Vertex Clamping Screw 1346M are available through Metav Werkzeuge; technical questions about fitment can be addressed prior to purchase to ensure the component meets the intended application. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust clamping performance is provided by the combination of heat-treated steel, an M10 x 1.5 metric thread and a 150 mm overall length, ensuring secure fixture holding and consistent repeatability. Order the clamping screw directly via Metav Werkzeuge or consult our specialists for application-specific advice. Clamping screw 1336M by Vertex — M10 x 1.5 thread, 150 mm A high-strength fastening element, the Clamping screw 1336M is engineered to secure workpieces and fixtures across workshop and industrial clamping applications. Heat-treated steel for high strength M10 x 1.5 metric thread 150 mm overall length Precise clamping for workshop fixtures Dependable hold and long service life for production use The design relies on heat-treated steel to deliver increased tensile strength and wear resistance, which translates into fewer replacements and lower downtime in repetitive clamping tasks. The M10 x 1.5 thread provides a standard metric pitch that mates reliably with commonly used tapped holes and nuts, enabling consistent preload and predictable torque behaviour. These mechanical characteristics result in repeatable clamping and stable fixturing, a clear advantage when batch accuracy and process stability are priorities. Easy integration into jigs, fixtures and toolholding systems With its 150 mm length and compact mass, the fastener integrates simply into existing jigs and clamp systems without requiring extensive modification. The modest weight (0.07 kg) reduces handling fatigue during manual assembly and minimises additional load on moving fixtures when used in automated workholding. The metric thread specification supports compatibility with standard retention elements, so workshop planners can incorporate the component into existing assemblies while maintaining straightforward torque control and reliable positional accuracy. Quality supply chain and consistent availability for workshops Selected and supplied by a partner with a rigorous quality filter, the component benefits from production oversight by Vertex and distribution through Metav Werkzeuge, which ensures consistent stock and traceability. Sourcing through this channel supports predictable lead times and helps maintain production continuity for trade and industry customers. The combination of durable materials and a dependable supply route contributes to a lower total cost of ownership and supports professional standards in workshop and light-industry environments. For tailored advice on fitting or to reserve Vertex clamping screw 1336M through Metav Werkzeuge, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 — assistance is available to confirm compatibility and delivery options. Technical data Article number: 1336M GTIN: 4061905094415 Manufacturer: Vertex Specifications Length: 150 mm Weight: 0.07 kg Thread: M10 x 1.5 pitch eCl@ss: 21022190 ETIM: EC001959 Materials & Features Material: heat-treated steel Intended use: clamping applications in workshop and industrial fixtures Category: Vertex FAQ What material is the clamping screw made from? The clamping screw is manufactured from heat-treated steel, chosen for improved strength and wear resistance in workshop clamping tasks. Which thread does the fastener use and is it standard? The item uses an M10 x 1.5 metric thread, a standard pitch that is compatible with commonly used tapped holes and nuts in industrial and workshop settings. What is the overall length and weight of the component? The fastener has an overall length of 150 mm and a weight of 0.07 kg, making it suitable for both manual and machine-operated fixtures. Can this screw be used in precision fixturing and repeatable assemblies? Yes, the material choice and standard metric thread enable repeatable clamping, making the component suitable for precision fixturing where consistent preload and positional accuracy are required. How can I obtain the Vertex clamping screw 1336M and check stock? Stock and ordering are handled via Metav Werkzeuge; the component is listed under article number 1336M and can be checked for availability through Metav’s sales channels. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from robust, repeatable clamping thanks to the combination of heat-treated steel construction and a standard M14x2P thread in a 150 mm length; the result is dependable fixture holding with minimal downtime. Order the part directly via Metav Werkzeuge or contact our consultants for specification support. Clamping screw 1346MA – M14x2P thread, 150 mm, Vertex The Clamping screw 1346MA is a heat-treated steel fastening element designed for secure clamping in jigs, fixtures and machine setups, offering standard metric threading for straightforward integration Heat-treated steel construction Standard M14x2P metric thread 150 mm length for deep clamping Compact mass: 0.15 kg per item Reliable hold that keeps production moving The combination of heat-treated steel and a metric M14x2P thread provides a stable clamping solution for repetitive operations. Heat treatment increases tensile strength and wear resistance, which translates into fewer interventions for replacement or repair. Using a standard thread reduces setup time because tapped holes and nuts conform to well-established metric specifications, enabling rapid integration into existing tooling. This dependable performance supports shorter cycle times and contributes to consistently accurate machining and assembly. Lower maintenance through durable design A component manufactured from heat-treated steel is less prone to deformation under load, which helps maintain clamping geometry over many cycles and reduces the risk of rework. The relatively low mass (0.15 kg) makes handling and manual positioning straightforward while still conveying a solid feeling of build quality. For operations where reliability and longevity matter, this bolt-like fastening element offers a cost-effective balance between robustness and ease of use, helping to keep maintenance intervals predictable and spare-part inventories manageable. Easy specification and integration for fixtures A 150 mm length allows deep engagement for thicker workpieces and multi-layer fixturing, while the M14x2P thread matches industry-standard fittings and accessories. Identification via SKU 1346MA and GTIN 4061905093289 simplifies procurement and inventory management, ensuring the correct item is ordered and traced. When selecting a clamping solution, confirm thread compatibility and the required engagement depth; the standard metric designation makes these checks straightforward. Backed by Vertex manufacturing, this component fits into modular jigs and bespoke fixtures alike, helping to streamline installation and minimise adaptation effort. Contact Metav Werkzeuge for tailored advice on specifying Vertex clamping screws (1346MA) or to arrange a detailed parts list for your fixtures; our team in Emmerich will advise on suitability and availability Technical Data Article number: 1346MA GTIN: 4061905093289 Manufacturer: Vertex Facts Length: 150 mm Thread: M14x2P Weight: 0.15 kg Material: Heat-treated steel Special features Robust heat-treated steel construction Metric thread for wide compatibility Suitable for fixture and jig clamping Vertex brand quality FAQ What material is used for this clamping screw? The clamping screw is made from heat-treated steel, providing enhanced strength and wear resistance for industrial clamping tasks. Which thread standard does the part use and will it fit standard fixtures? The item uses an M14x2P metric thread, compatible with standard M14 tapped holes and nuts commonly used in fixtures and jigs. What is the length and mass of the fastening element? Length is 150 mm and the mass is approximately 0.15 kg, suitable for deeper clamping requirements without excessive weight. How can I identify the exact product for ordering? Reference SKU 1346MA or GTIN 4061905093289 when ordering to ensure the correct Vertex clamping screw is supplied. Is this component suitable for heavy-duty or precision applications? Manufactured from heat-treated steel and featuring a standard metric thread, the component is intended for robust, repeatable clamping in both heavy-duty setups and precision-oriented fixtures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining a M16x2P precision thread with a heat-treated steel construction and a 150 mm overall length, the component delivers reliable clamping force and long service life. Benefit from robust handling and predictable performance for fixture work — order the clamping screw directly via Metav Werkzeuge or consult their specialists for application support. Clamping screws — M16x2P thread, 150 mm length (Vertex) The Clamping screws are a robust fastening solution for workshop jigs and fixture assemblies, featuring a standard M16x2P thread and a heat-treated steel body for consistent performance across repetitive clamping tasks M16x2P precision thread 150 mm overall length Heat-treated steel construction Lightweight 0.19 kg mass Consistent clamping and repeatable positioning for production Engineered for dependable fastening, this fastener provides consistent clamping through a standardised M16x2P thread form that matches common fixture hardware. The precise thread profile reduces play and enables repeatable torque application, which in turn lowers the risk of misalignment during repetitive machining or assembly operations. For production-oriented environments, that predictability translates into fewer adjustment cycles and improved cycle-time stability. The construction supports routine tool-up processes and simplifies specification in CAD and parts lists. Durable material choice to reduce maintenance intervals Constructed from heat-treated steel, the fastener resists wear under frequent tightening and release, extending service intervals and decreasing incidence of replacement. The modest mass of 0.19 kg aids handling in assembly while the hardened substrate sustains clamping loads without premature deformation. These material properties combine to reduce unscheduled stoppages and contribute to a lower total cost of ownership over a production year, making the part a pragmatic choice where longevity and dependable performance matter. Simplified ordering and clear part identification for engineering workflows Specified as Vertex item 1356M, the component is ready for integration into part lists and procurement systems; the clear designation and industry-standard thread mean fast cross-referencing with existing fixture designs. The standardised length of 150 mm simplifies BOM management and ensures compatibility with many common clamping setups. Where bespoke dimensions are required, Metav Werkzeuge can advise on equivalents and system-level considerations to maintain clamp force and alignment integrity. For specification assistance or to confirm suitability for a particular fixture application, contact Metav Werkzeuge in Emmerich — their consultants support technical selection and can reference the Vertex 1356M clamping screw for precise ordering and delivery Technical data SKU: 1356M GTIN: 4061905087554 Manufacturer: Vertex ECLASS: 21022190 Core specifications Length: 150 mm Weight: 0.19 kg Thread: M16x2P Features Designation: Clamping screws Material: Heat-treated steel Brand: Vertex FAQ What are the thread and length specifications? The clamping screw is supplied with an M16x2P thread and a 150 mm overall length; listed as Vertex SKU 1356M. Which material is used for the fastener? The fastener is manufactured from heat-treated steel, providing improved wear resistance and dimensional stability under repeated use. Is the component suitable for repetitive fixture work? Yes, the combination of a standard thread form and hardened material offers repeatable clamping performance suitable for jigs and fixture assemblies in workshop environments. How heavy is the part for handling and assembly? The part weight is 0.19 kg, making it manageable for manual assembly while still robust enough for industrial clamping tasks. How is the part identified for procurement and documentation? The item is identified by SKU 1356M and GTIN 4061905087554; these identifiers facilitate integration into procurement systems and technical documentation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine reliable heat-treated steel construction with a precise M18 x 2.5 thread and a 150 mm overall length to ensure dependable clamping in fixtures and jigs. Order the clamping screw directly via Metav Werkzeuge or ask our consultants for technical advice. Clamping screw 1366M by Vertex — M18 x 2.5 thread, 150 mm The Clamping screw 1366M is a robust clamping element for workshop fixtures and machining jigs, designed to provide secure engagement and consistent positioning across standard metric systems Heat-treated steel construction M18 x 2.5 thread for secure fastening 150 mm overall length Lightweight 0.25 kg for easy handling Reliable clamping for precise fixtures The combination of heat-treated steel and a metric M18 x 2.5 thread delivers consistent mechanical strength and long service life for clamping applications. The heat treatment increases surface hardness and wear resistance, reducing deformation under repeated torque and preserving thread geometry. In practice, this means fixtures stay true for longer periods, supporting repeatable machining tolerances and reducing the need for frequent re-tightening. The construction is aimed at providing a dependable mechanical connection rather than decorative finish, so the focus is on functional longevity and stable clamping performance. Faster set-up and compatibility in the workshop A standard metric thread and a 150 mm overall length simplify integration with existing jigs and fixtures, shortening changeover times and improving shop-floor efficiency. The 150 mm reach allows secure engagement where clearance is limited, while the modest mass (0.25 kg) keeps handling comfortable during frequent adjustments. Using established thread dimensions aids compatibility with common nuts and threaded holes, reducing the need for custom adaptors and therefore lowering setup complexity. The result is a practical component that supports quicker assembly and fewer interruptions to production flow. Low-maintenance design that supports sustainability Durability reduces replacement frequency and operational waste: the solid, heat-treated design is intended for long-term use with straightforward upkeep. Periodic inspection of the thread and light lubrication where appropriate will maintain smooth operation and prevent galling; this basic maintenance keeps the part serviceable without specialised procedures. By favouring durable components, workshops can lower lifetime costs and minimise stock rotation. The component’s reliable function reflects a practical approach to resource-efficient tooling and contributes to a more sustainable workshop practice. For dependable fixture performance, select the Vertex clamping screw 1366M via Metav Werkzeuge; our Emmerich-based consultants are available for technical guidance — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 · WhatsApp: +49 170 2837271 Technical data SKU: 1366M GTIN: 4061905091414 Manufacturer: Vertex eClass: 21022190 Numbers Length: 150 mm Weight: 0.25 kg Features Material: heat-treated steel Thread: M18 x 2.5 FAQ What thread and length does the clamping screw use? The Clamping screw 1366M is specified with an M18 x 2.5 thread and an overall length of 150 mm, suitable for standard metric fixture interfaces. What material is the screw made from? This product is manufactured from heat-treated steel, providing enhanced wear resistance and extended service life compared with untreated alternatives. Is the 1366M suitable for frequent adjustment in jigs? The robust construction and standard metric thread of the 1366M make it well suited to regular adjustment in jigs and fixtures, with recommended occasional lubrication to maintain smooth operation. How does the clamping screw contribute to workshop efficiency? With a standard thread and practical length, the clamping screw 1366M reduces the need for special adaptors and simplifies set-up, helping to speed changeovers and maintain production flow. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of durable heat-treated steel and a precise M20x2.5 thread for consistently secure clamping in industrial fixtures; benefit from a compact 150 mm length and manageable 0.3 kg mass for versatile installation. Order the clamping screw directly via Metav Werkzeuge or ask our consultants for tailored advice. Clamping screw 1376M by Vertex – heat-treated steel, M20x2.5 thread The clamping screw 1376M is a robust clamping fastener designed for fixtures, jigs and general clamping technology in workshops and industrial production. Heat-treated steel for durable clamping M20 x 2.5 thread for secure fitting 150 mm overall length Reliable clamping performance for production use The clamping bolt provides consistent clamping force where secure fixation is required. Thanks to the M20x2.5 thread with defined pitch, the fastener engages reliably with mating components, reducing play and ensuring repeatable positioning in assemblies. This makes it suitable for repetitive production tasks and fixture setups where mechanical stability translates directly into process efficiency and fewer rejects. Durability that reduces downtime Manufactured from heat-treated steel, the fastener resists wear and deformation under load, extending service life in heavy-duty applications. Heat treatment increases surface hardness and fatigue strength, which in turn lowers the need for frequent replacements. The result is a more predictable maintenance schedule and improved uptime for clamping fixtures and jigs in everyday workshop routines. Precision dimensions for straightforward integration With an overall length of 150 mm and a mass of approximately 0.3 kg, the component balances reach with easy handling during installation. The nominal thread size and pitch (M20 x 2.5, 20 mm diameter with 2.5 mm pitch) follow standard metric conventions, enabling compatibility with common nuts, tapped holes and clamping blocks. Clear dimensional specification supports seamless integration into existing setups and simplifies engineering documentation. Practical use cases and handling benefits The design is optimised for mechanical clamping tasks in manufacturing and maintenance contexts, supporting both temporary and semi-permanent fixtures. The combination of standard metric thread and robust material means the fastener is suitable for machine tables, assembly jigs and bespoke fixture constructions. Handling is uncomplicated thanks to familiar form factor and weight, which helps to speed up setup without compromising safety or repeatability. Contact Metav Werkzeuge for stock availability and to discuss suitable quantities or application specifics; our consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 1376M SKU: 1376M GTIN: 4061905087561 Manufacturer: Vertex Material: Heat-treated steel Thread: M20x2.5P Length: 150 mm Weight: 0.3 kg Core specifications Length: 150 mm Thread size: M20 x 2.5 (pitch 2.5 mm) Weight: 0.3 kg GTIN: 4061905087561 Materials & applications Heat-treated steel Suitable for fixtures and clamping technology Manufacturer brand: Vertex Category: Clamping components FAQ What thread specification does this clamping screw use? The clamping screw 1376M features an M20x2.5 thread (20 mm diameter, 2.5 mm pitch), suitable for standard metric tapped holes and nuts. Is the material suitable for heavy-duty workshop use? Yes, the screw is made from heat-treated steel, which provides increased hardness and fatigue resistance for industrial clamping applications. Can this component be used with existing clamping blocks and jigs? The dimensional standardisation (M20x2.5, 150 mm length) allows integration with common clamping blocks and jigs; compatibility should be verified against the specific fixture geometry. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

High-precision M24x3P threading together with heat-treated steel construction provides secure, repeatable clamping and extended service life; ideal for demanding fixture and jig applications. Order the clamping screw 1386M directly via Metav Werkzeuge or ask our consultants if needed. Clamping Screw 1386M — M24x3P thread, 150 mm length (Vertex) The Clamping Screw 1386M is a robust industrial clamping fastener designed for fixtures and jigs, combining a precision M24x3P thread with a 150 mm overall length for reliable axial engagement across heavy-duty assemblies. Heat-treated steel for longevity M24x3P precision thread 150 mm overall length Designed for fixture clamping Consistent, measurable clamping performance for production use The deliberately ground M24x3P thread ensures consistent axial positioning and minimal backlash, which supports reproducible clamping forces across repeated cycles. Where process stability matters, thread accuracy reduces setup time and rejects caused by misalignment. Using a component manufactured from heat-treated steel gives a high surface hardness that resists plastic deformation under load, translating into fewer adjustments and lower downtime. This combination of precision and robustness is particularly relevant for organised production lines, tool rooms and jigs where repeatability determines throughput. Long service life through material choice and design A component constructed from heat-treated steel benefits from improved wear resistance and fatigue strength compared with untreated fasteners; the resulting longevity reduces replacement frequency and maintenance effort. The screw’s proportions and mass (approx. 0.45 kg) are balanced to provide stable handling while retaining sufficient mass to avoid vibration-induced loosening in demanding operations. Where corrosion or extreme environments are a concern, additional surface treatments can be specified separately; the basic design, however, already favours extended service intervals and predictable life-cycle costs. Practical integration with fixtures and machine accessories With an overall length of 150 mm, the screw is suitable for a wide range of clamping distances common in bench fixtures and modular fixturing systems. The clear M24x3P specification simplifies procurement and replacement planning in spare-part lists. For straightforward identification in documentation and ordering, use the SKU 1386M together with the Vertex brand reference; this ensures the correct fit when matching to threaded inserts, clamping levers or mating components. Assembly requires standard tools for M24 threads and benefits from correct torque application to achieve the intended clamp force without overstressing the fastener. For precise fixture solutions, request availability and advice on the Vertex clamping screw 1386M from Metav Werkzeuge in Emmerich — contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 to review compatibility with existing jigs and production setups Technical data Article number: 1386M GTIN: 4061905090462 Manufacturer: Vertex Core specifications Thread: M24x3P Length: 150 mm Weight: 0.45 kg Materials & features Material: Heat-treated steel Product type: Clamping screw EClass: 21022190 FAQ What thread specification is used on this clamping screw? The clamping screw uses a precision M24x3P thread to ensure accurate axial engagement and compatibility with standard M24 mating parts. Is the material suitable for heavy-duty use? Yes, the heat-treated steel construction provides increased wear and fatigue resistance, making the 1386M suitable for demanding clamping applications. How long is the screw and how does that affect its use? The overall length is 150 mm, which accommodates typical clamping distances found in fixtures and modular jigs and simplifies integration into existing setups. How should the screw be specified when ordering spare parts? Order using the SKU 1386M together with the Vertex brand and thread/length details (M24x3P, 150 mm) to ensure the correct replacement part is supplied. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of heat-treated steel durability, M8x1.25 compatibility, and a 150 mm reach for dependable clamping performance in production and fixturing. Order the part directly via Metav Werkzeuge or consult the team for application guidance. Vertex 1326M Clamping Screw — M8x1.25 thread, heat-treated steel 1326M clamping screw designed for secure fixture and jig clamping in machining and assembly environments Heat-treated steel for improved strength M8x1.25 thread for standard metric fittings 150 mm overall length for extended reach Precision-machined for reliable clamping High clamping force from robust materials The use of heat-treated steel provides a stiff, wear-resistant fastener that maintains clamping force under repeated cycles. The combination of a standard M8x1.25 metric thread and a carefully controlled shaft diameter ensures consistent engagement with threaded elements, reducing slippage and rework. This makes the component particularly suitable for demanding workshop and light industrial applications where repeatability and load retention are critical. Precision finish reduces setup time and variability A precision-machined surface and controlled tolerances contribute directly to faster setup and fewer adjustments during repeat runs. With an overall 150 mm length the fastener offers additional reach for deeper jigs without compromising rigidity; the relatively low weight also minimises added inertia when used in moving fixtures. These attributes support improved throughput and lower scrap rates by ensuring each clamping action behaves predictably. Seamless integration into existing clamping systems Manufactured to metric standards and supplied under the Vertex range, the item integrates easily with commonly used fixtures and tooling plates. The construction focuses on long-term reliability, so maintenance intervals are extended and downtimes reduced. For shops standardising on metric hardware, the component is a practical choice to harmonise tooling inventories and simplify spare-part management. For robust fixture performance, choose the Vertex 1326M via Metav Werkzeuge — contact our consultants at Metav Werkzeuge for tailored application advice and delivery options. Technical Data Article number: 1326M GTIN: 4061905091391 Eclass: 21022190 Manufacturer: Vertex Core specifications Length: 150 mm Thread: M8x1.25 Weight: 0.05 kg Materials & special features Material: Heat-treated steel Brand: Vertex Product type: Clamping screw FAQ What materials is this clamping screw suitable for? The 1326M clamping screw is manufactured from heat-treated steel, providing strength and wear resistance suitable for use in metalworking fixtures and general workshop applications. What is the thread specification and compatibility? Thread form is M8x1.25, matching standard metric female threads commonly used in jigs, fixture plates and tooling blocks. How does the length affect its application? With a 150 mm overall length the component reaches deeper into assemblies, enabling clamping of larger or recessed workpieces without loss of rigidity. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a compact accessory that expands the capabilities of existing cutter grinders, delivers consistent results through a robust 2 kg construction and is clearly identifiable by GTIN 4061905083808 — order the U2-E grinding attachment directly via Metav Werkzeuge or consult our specialists for integration advice. U2-E — Grinding attachment for shank cutters (Vertex) The U2-E is a dedicated grinding attachment for universal cutter grinders, designed to extend workshop flexibility and enable precise finishing of shank cutters. Grinding attachment for shank cutters Compatible with universal cutter grinders Solid 2 kg construction Identifiable by GTIN 4061905083808 Extend machine capability with a focused accessory The accessory provides a straightforward way to increase the functional range of existing cutter grinders without requiring a dedicated new machine. By adding this grinding attachment, workshops gain the benefit of adaptable tooling for a wider range of shank cutter tasks. The design emphasises compatibility with universal units, allowing the attachment to be integrated into established production sequences and reducing the need for multiple specialist machines. Practical efficiency for workshop workflows Fitting the attachment streamlines changeovers and contributes to a leaner process flow. With a compact, robust construction and a clear identification code, the unit supports predictable handling and inventory management. The result is less time spent on logistics and more time on machining operations, supporting a measurable improvement in throughput where the focus is on repeatable finishing and stable set-up routines. Technical clarity and safe handling in daily use The accessory’s layout is kept deliberately simple to aid familiarisation during routine shifts; this reduces setup uncertainty and helps maintain consistent quality. Relevant numeric data — such as the item weight of 2 kg and GTIN for traceability — simplifies storage and procurement procedures. Clear labelling and straightforward mounting reduce the risk of assembly errors and support operator confidence during frequent tool changes. Built for professionals who value reliability Designed as an accessory within the cutting tools and CNC context, the unit complements existing grinders to deliver dependable finishing without unnecessary complexity. Workshops focussed on precision and uptime will appreciate the ability to expand capabilities while maintaining familiar operating principles. The accessory aligns with a practice of targeted investments that increase flexibility and protect production continuity. Contact Metav Werkzeuge to discuss how the Vertex U2-E grinding attachment can be integrated into existing cutter grinders and receive tailored advice from our team — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: U2-E GTIN: 4061905083808 Weight: 2 kg ECLASS: 21059113 Facts SKU: U2-E Category: Vertex Product type: Grinding attachment for shank cutters Special features Compatibility: for universal cutter grinders Shop title: Vertex Zubehör jetzt im Webshop besorgen Description: Zubehör, rascher Versand, weitere ► Jetzt auf Rechnung bestellbar Günstig im Shop beziehen FAQ What is the primary purpose of this attachment? The accessory is intended as a grinding attachment for shank cutters, enabling universal cutter grinders to perform additional finishing tasks with improved versatility. Which machines is the attachment compatible with? Compatibility is with universal cutter grinders; the item is supplied as an accessory to broaden the function of those machines rather than as a standalone grinder. How heavy is the attachment and why does that matter? The attachment weighs 2 kg, a practical mass that supports secure mounting while remaining easy to handle during tool changes and maintenance. How can the attachment be identified for procurement or stock control? The unit is identifiable by GTIN 4061905083808 and the article number U2-E, facilitating traceability and ordering. Is this a Vertex product and where can additional information be obtained? Yes, the item is a Vertex accessory; for further integration or technical clarification Metav Werkzeuge can provide detailed advice. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine 0.01 mm repeatability, robust S45C construction and a compact 3 kg kit to simplify setup and inspection tasks; order the VP-146 directly via Metav Werkzeuge or ask our consultants for application advice. VP-146 Ground Parallels Set — precision-ground workshop parallels, Vertex The VP-146 Ground Parallels Set is a precision-ground set for accurate workholding, measuring and setup tasks in machining and inspection environments. Ground finish with 0.01 mm accuracy Set of 12 parallels in graduated heights Made from S45C steel for dimensional stability Compact set weight approx. 3 kg for easy handling Improved setup reliability through measurable precision Thanks to a ground finish and a declared accuracy of 0.01 mm, this parallel set provides a stable reference for clamping and inspection jobs where repeatable alignment matters. The finely finished bearing surfaces reduce rocking and tilt when parts are elevated on parallels, which translates into fewer adjustments during machining sequences. The combination of tight tolerances and solid construction supports consistent datum references for layout, transfer and comparative measurement work, reducing rework and measurement uncertainty. Practical composition that fits workshop routines The kit contains 12 parallels in graduated sizes, enabling flexible stacking and shimming for a wide range of component heights. The set composition includes pairs of parallels across several widths, supplied in fixed lengths for straightforward use on vises and inspection plates. Graduated heights mean quicker set-up times when establishing parallelism or lifting parts for through-drilling and finishing; the modular arrangement replaces improvised shimming and speeds up repetitive tasks on the shop floor. Durable material and compact handling for everyday use Constructed from S45C steel and supplied as a compact kit weighing around 3 kg, the set balances wear resistance with manageable handling. The material choice provides dimensional stability under routine workshop conditions while the ground surfaces maintain flatness over extended use. Because the set is finished and matched, it supports both bench inspection and machining fixtures without additional preparation, helping to streamline both quality control procedures and small-batch production runs. Contact Metav Werkzeuge in Emmerich for tailored advice on the VP-146 Ground Parallels Set or to request further technical details Technical Data SKU: VP-146 GTIN: 4061905094057 Manufacturer: Vertex Core dimensions & accuracy Dimensions: 195 x 180 x 90 mm Accuracy: 0.01 mm Weight: 3 kg Pieces per set: 12 Materials & special features Material: S45C steel Ground finish (geschliffen) Includes: 2x 4.6x32x150 mm; 2x 4.6x34x150 mm; 2x 4.6x36x150 mm; 2x 4.6x38x150 mm; 2x 4.6x40x150 mm; 2x 4.6x44x150 mm FAQ What applications are the parallels designed for? The VP-146 Ground Parallels Set by Vertex is intended for workshop setup, clamping and inspection tasks where accurate parallel support and repeatability are required. How does the stated 0.01 mm accuracy affect everyday use? An accuracy of 0.01 mm ensures that the parallels provide consistent datum surfaces for machining and measurement, reducing alignment errors and supporting reliable transfer and inspection operations with the VP-146 set. What sizes are included in the set and how are they arranged? The kit contains 12 matched parallels in graduated widths and identical lengths (150 mm), supplied in pairs as listed in the technical data for flexible stacking and shimming. Is S45C suitable for regular shop use? S45C offers robust mechanical properties and dimensional stability for routine workshop conditions; the ground finish on the VP-146 helps maintain flatness and wear resistance during standard usage. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, high-precision indexing solution that combines robust load capacity and versatile mounting for reduced set-up time and dependable repeatability. The combination of a 150 mm diameter working surface, MT-2 spindle taper and dual horizontal/vertical capability supports a wide range of milling and drilling applications. Order the HV-6 directly via Metav Werkzeuge or ask our consultants for tailored integration advice. HV-6 Indexing Rotary Table (Horizontal/Vertical) — 150 mm, MT-2 Mounting by Vertex The HV-6 is a compact indexing rotary table designed for horizontal and vertical setups, providing precise angular positioning for small to medium machining tasks. 150 mm diameter rotary table MT-2 spindle taper mounting Load capacity 40 kg horizontal / 20 kg vertical T-slots 3 × 11 mm Precise indexing for repeatable machining results The compact indexing rotary table delivers fine angular control, with 4° per spindle revolution and a reading of 20", which enables accurate division and positioning for repetitive operations. This level of resolution supports tasks such as hole patterning, gear prototyping and fixture alignment, where repeatability is critical. The machined disc and indexed drive minimise backlash, translating the mechanical settings into stable, measurable outcomes that shorten setup times and reduce scrap rates. Robust load capacity and secure clamping for versatile mounting Built for workshop resilience, the unit accepts a maximum load of 40 kg horizontally and 20 kg vertically, allowing secure workholding of small fixtures and components. The MT-2 spindle taper provides an established mounting standard for direct integration with collets or arbors, while the 3 × 11 mm T-slots on the table surface permit flexible clamp placement. The overall compact footprint (205 × 163 × 78 mm) and a weight of 12.1 kg combine to offer a stable platform that is nonetheless easy to position and clamp to a variety of machine tables. Compact design that supports efficient production workflows With a 150 mm diameter working surface and both horizontal and vertical orientation, the device is suited to confined workspaces and multi-operation benches. The solidity of the construction ensures consistent indexing under load, which reduces the need for repeated adjustments and supports a smoother machining sequence. Compatibility with common mounting standards and a manageable mass make the table a practical choice for job shops and precision workshops seeking to enhance throughput without extensive fixture investment. Opt for Vertex quality with the HV-6 indexing rotary table for compact, repeatable precision — contact Metav Werkzeuge in Emmerich for detailed product information and purchasing: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: HV-6 GTIN: 4061905086953 ECLASS: 36600610 Manufacturer: Vertex Facts Diameter: 150 mm Height: 80 mm Weight: 12.1 kg Max load: 40 kg horizontal / 20 kg vertical Dimensions: 205 × 163 × 78 mm Indexing: 4° per spindle revolution Reading: 20" T-slot: 3 × 11 mm Special features Mounting taper: MT-2 Orientation: Horizontal and vertical Compact footprint for confined benches Suitable for precision indexing and fixture use FAQ What is the maximum load the table can carry horizontally? The HV-6 supports a maximum horizontal load of 40 kg, specified for stable indexing and secure clamping under normal workshop conditions. Which spindle taper does the rotary table use? The rotary table is supplied with an MT-2 spindle taper for standard arbors and direct mounting options. Can the table be used in both horizontal and vertical setups? Yes, the HV-6 is designed for both horizontal and vertical orientations, enabling versatile fixture layouts and multi-axis operations. What is the usable table diameter for clamping workpieces? The working diameter is 150 mm, providing a compact but practical surface for fixtures and component mounting. How fine is the indexing resolution? Indexing is achieved at 4° per spindle revolution with a reading of 20", offering fine angular control for repetitive machining tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of consistent hydraulic clamping and a generous 0–200 mm jaw opening to secure larger workpieces with minimal operator effort; the cast iron body and 2500 kgf clamping force deliver stable machining and long-term reliability — order through Metav Werkzeuge or consult their specialists for specification support. VMCH-4 Hydraulic Machine Vice by Vertex — Extra-large opening, hydraulic clamping The VMCH-4 is a hydraulic machine vice designed for workshop and production clamping, offering an extra-large 0–200 mm jaw opening for flexible workpiece handling. Hydraulic clamping for consistent hold Extra-large 0–200 mm opening Made from cast iron for stability High clamping force 2500 kgf Faster cycles through consistent hydraulic clamping The hydraulic actuation provides a reliable and even clamping force that reduces manual intervention and supports higher throughput on repetitive jobs. With a rated 2500 kgf, the vice maintains grip under machining loads, which minimises part movement and rework. The controlled pressure also reduces operator fatigue compared with manual vises, making it suitable for longer production runs where repeatability matters. The design supports a measured accuracy of 0.01 mm, giving confidence where precise alignment is required. Workpiece versatility with an extra-large opening A 0–200 mm opening significantly broadens the range of components that can be secured without auxiliary fixtures. The vice’s cast iron construction provides inherent vibration damping, improving surface finish on milled or drilled parts. Despite its robust build, the unit remains compact enough for integration into common machine tables and benches thanks to its modest footprint and clear external dimensions. This combination of capacity and stability helps streamline setups for irregular or bulky items. Compact footprint and dependable workshop performance Measuring 121 x 435 x 118 mm and weighing 26 kg, the vice balances rigidity with manageable mass for fixed mounting on milling or drilling tables. The compact dimensions save working space while the robust body resists deformation under load, supporting consistent clamping over time. Built for everyday shop use, the construction simplifies maintenance routines and reduces downtime, supporting a predictable supply chain when sourced through Metav’s distribution network. Contact Metav Werkzeuge for tailored advice on integrating the VMCH-4 into production: info@metav-werkzeuge.com | +49 2822 7131930 — local stock and technical consultation from Emmerich ensure rapid supply and reliable delivery Technical data SKU: VMCH-4 GTIN: 4061905083891 ETIM: EC002173 ECLASS: 21020601 Brand: Vertex Facts Opening: 0–200 mm Dimensions: 121 x 435 x 118 mm Weight: 26 kg Clamping force: 2500 kgf Accuracy: 0.01 mm Special features Material: Cast iron Type: Hydraulic Product category: Machine vice Designation: Extra-large opening FAQ What is the jaw opening range of the vice? The vice provides an opening range of 0–200 mm, allowing secure clamping of a wide variety of workpiece sizes. What clamping force can be expected from this hydraulic vice? The vice delivers a clamping force of 2500 kgf, suitable for demanding machining tasks that require steady gripping. Which material is the vice body made from? The body is manufactured from cast iron, chosen for its stability and vibration-damping properties during machining. What are the external dimensions and weight of the unit? External dimensions are 121 x 435 x 118 mm and the unit weighs 26 kg, making it compact yet robust for fixed mounting. How precise is the clamping alignment? The vice is specified with an accuracy of 0.01 mm, supporting applications where tight tolerances are needed. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Precision positioning and a compact, swivelling design combine to improve set-up speed and repeatability; benefit from the Ø150 mm table, 4° indexing per spindle turn and a solid 21.3 kg construction — order the VU-150 directly via Metav Werkzeuge or ask our consultants if needed. Vertex VU-150 Swivelling Rotary Table (Ø150 mm) The VU-150 is a swivelling rotary table designed for precise angular positioning and repeatable workholding in machining and inspection environments. Swivelling design for angular positioning Ø150 mm work surface for compact parts Compact footprint 266 x 216 x 140 mm Solid 21.3 kg construction for stability Faster, more repeatable angular indexing for production and inspection The 4° indexing per spindle revolution delivers a predictable step size that simplifies multi-position operations; this resolution translates directly into repeatable angular setups, reducing manual alignment time and lowering scrap rates. Built specifically for workholding tasks, the table enables stable indexing for milling, drilling or measurement sequences, with the clear benefit being fewer reworks and a more consistent production flow. The indexing logic is easy to understand and integrates with established jigging routines, making the unit a practical choice where angular accuracy and process reliability matter. Compact footprint with a stable, vibration‑resistant platform With external dimensions of 266 x 216 x 140 mm and a Ø150 mm working surface, the unit occupies minimal bench or machine table space while offering a solid 21.3 kg mass that increases inertia and reduces vibration during operations. The compact design supports tight workshop layouts and allows machines to be equipped without major alterations to fixturing. The heavier construction contributes to surface finish quality and positional stability, so short-cycle operations and precision measuring tasks benefit from fewer oscillations and better contact consistency. Designed for smooth integration into machining and inspection workflows The swivelling table character is especially useful when angled cuts or inspections are required; the tilt function removes the need for bespoke wedges or time-consuming re-clamping, streamlining changeover. The device is suited to small to medium parts handling where precise angular steps improve throughput. Clear, mechanical indexing means setup is intuitive for technicians familiar with conventional workholding; the component contributes to leaner process sequences and supports production environments that prioritise uptime and predictable cycle times. Durable construction and reliable supply chain assurance Manufactured by Vertex, the unit reflects established engineering standards and is supplied through Metav Werkzeuge, a partner known for consistent availability and quality control in Europe. The combination of proven build quality and a local logistics hub in Emmerich provides both immediate availability and a trustworthy quality filter for buyers. For procurement teams, this alignment reduces supplier complexity and delivers a dependable source for workshop essentials, supporting long-term operational planning. For specific integration advice on the Vertex VU-150 and to discuss compatibility with existing fixturing, contact Metav Werkzeuge at info@metav-werkzeuge.com or by phone on +49 2822 7131930; Metav’s specialists can help determine the optimal configuration for individual workflows Technical data Article number: VU-150 GTIN: 4061905091872 Manufacturer: Vertex Facts Diameter: 150 mm Dimensions: 266 x 216 x 140 mm Weight: 21.3 kg Index per spindle turn: 4° Special features Swivelling rotary table SKU: VU-150 ECLASS: 21020590 FAQ What is the indexing step of the rotary table? The indexing step is 4° per spindle turn, which provides predictable angular increments for repeatable positioning with the VU-150 swivelling rotary table. Which workpiece size is the table suited for? The Ø150 mm work surface of the VU-150 is optimised for small to medium parts where compact, precise positioning is required. How heavy is the unit and why does that matter? The unit weighs 21.3 kg; the mass increases stability and reduces vibration, improving finish quality and positional consistency during machining operations. Can the table be used for both machining and inspection tasks? Yes, the swivelling design and mechanical indexing make the VU-150 suitable for both machining set-ups and metrological inspections that require repeatable angular positions. Who supplies the VU-150 in Europe? The VU-150 is supplied by Metav Werkzeuge and manufactured by Vertex; Metav provides local fulfilment and a consistent quality filter for European customers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high clamping force, fine repeatability and sturdy construction for efficient workholding; order the vice directly via Metav Werkzeuge or consult the team for application-specific advice. VD-675 Machine vice — 2500 kgf clamping force, 0–190 mm opening (Vertex) A VD-675 machine vice designed for secure workholding in machine-tool environments, ideal for milling, drilling and machining tasks that require stable clamping and precise repeatability. Robust 2500 kgf clamping force Wide 0–190 mm jaw opening Precision to 0.01 mm for repeatable work Solid 42 kg construction for stability Hold larger workpieces reliably for uninterrupted machining The VD-675 is engineered to deliver consistent holding power with a 2500 kgf rated clamping force and a 0–190 mm jaw opening, enabling secure fixation of medium to large components. The combination of strong clamping and substantial mass reduces vibration and chatter, which helps to protect cutting tools and improves surface finish. In practical terms, fewer re-clamps and less downtime translate into higher throughput and predictable process moments. Achieve repeatable accuracy and reduce rework With a claimed accuracy of 0.01 mm, this vice supports high-precision setups where tolerances matter. Repeatability in clamping position lowers the need for constant recalibration between operations; the result is fewer scrapped parts and shorter set-up times. The accuracy figure should be interpreted as a guide to the vice’s capability for repeatable positioning in standard machine setups, where toolpath consistency and fixture stability are essential. Built to remain stable under load and over time The unit’s solid construction and mass (42 kg) provide inherent resistance to movement under cutting forces, improving stability without complex anchoring schemes. A heavier vice transfers energy away from the workpiece and into the machine base, so rigidity is gained through weight and geometry rather than elaborate maintenance. The mechanical design is straightforward, promoting reliable day-to-day use and predictable maintenance intervals. Practical fit for workshop and production environments Designed as a classic machine vice for toolroom and production use, the model adapts to common machining processes and fixtures. Its range of opening and rated clamping capacity make it suitable for a variety of components while the mechanical simplicity ensures easy integration into standard machining centres. For tailored fixture advice or to confirm compatibility with specific setups, consult Metav’s technical advisors who can match the vice to the application. Contact Metav Werkzeuge today for tailored advice and a quotation for the Vertex VD-675 machine vice; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: VD-675 Name: Machine vice Type: Mechanisch GTIN: 4061905091742 ETIM: EC001959 eCl@ss: 21020601 Facts Opening range: 0–190 mm Dimensions: 478 x 296 x 160 mm Weight: 42 kg Clamping force: 2500 kgf Accuracy: 0.01 mm Special features Brand: Vertex Designation: Maschinenschraubstock Gallery images: va-5-detail.jpg, va-5-technische-zeichnung.jpg FAQ What is the maximum jaw opening of this vice? The vice offers a jaw opening of 0–190 mm, allowing accommodation of a wide range of component sizes for machining operations. How much clamping force does the vice provide? Clamping is rated at 2500 kgf, providing strong fixation for machining processes that generate significant cutting forces. What repeatability can be expected from the vice? The vice is specified with an accuracy of 0.01 mm, which supports repeatable positioning in standard machine-tool applications. Is the unit heavy enough to improve machining stability? Yes, with a mass of 42 kg the vice contributes to machine stability, reducing vibration transfer and helping to maintain surface quality. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from the combination of hardened, ground alloy steel, 0.01 mm accuracy and a versatile 18-piece range for reliable workholding; order the set directly via Metav Werkzeuge or consult our specialists for application advice. VP-118A Parallel Block Set (ground) by Vertex — hardened alloy steel, 18-piece The VP-118A is a ground parallel block set designed for accurate levelling and stable clamping in machining and workshop applications. Hardened, ground alloy steel Accuracy of 0.01 mm for fine alignment Complete 18-piece set for versatile clamping Standard 150 mm length on each parallel Consistent machining results through precision alignment The set delivers repeatable alignment thanks to 0.01 mm accuracy, which reduces setup variation and shortens cycle times in batch work. Manufactured from alloy steel, each bar is hardened and subsequently ground, producing flat, parallel faces that keep tolerances stable under repeated clamping. In practice, this precision translates into fewer reworks and more predictable downstream processes, an important benefit for production environments that value throughput and part consistency. Durable construction for everyday workshop use A focus on robust materials and finishing makes these parallels a long-term asset. The ground finish resists wear and retains a consistent reference surface, so alignment does not drift with normal shop use. The construction supports frequent handling and simple cleaning without compromising the contact faces, which means less downtime for maintenance and more reliable fixture setups for milling, drilling and inspection stations. Practical set configuration to simplify fixturing Delivered as an 18-piece kit with standard 150 mm length parallels in a range of heights, the set covers common clamping scenarios without needing multiple separate purchases. The combination of sizes permits stacked arrangements and fine height adjustment for irregular raw stock, reducing the time spent searching for suitable support blocks. This pragmatic range is particularly useful for job shops and maintenance departments that require flexibility from a single compact set. Built to integrate with workshop workflows The parallels support both manual and machine-mounted setups and are well suited where stable workpiece support is required for precise machining or measurement. By offering a clear, verifiable specification and a compact set of options, the product helps technicians make faster fixturing decisions and maintain process quality. The result is greater confidence at the workbench and improved overall equipment effectiveness. Contact Metav Werkzeuge for availability, technical advice and tailored recommendations for the VP-118A parallel block set — reach us at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability for specific applications Technical data SKU: VP-118A GTIN: 4061905093432 Manufacturer: Vertex EClass: 21170610 Core data Accuracy: 0.01 mm Weight: 5.8 kg Total pieces: 18 Standard length: 150 mm Materials & features Alloy steel, hardened and ground Ground finish (geschliffen) Set contents: 2x 8.5×14×150 mm, 2x 8.5×16×150 mm, 2x 8.5×20×150 mm, 2x 8.5×24×150 mm, 2x 8.5×30×150 mm, 2x 8.5×32×150 mm, 2x 8.5×36×150 mm, 2x 8.5×40×150 mm, 2x 8.5×44×150 mm FAQ What level of accuracy can be expected from the parallel blocks? The VP-118A parallel block set provides an accuracy of 0.01 mm, ensuring tight alignment tolerances for precise fixturing and measurement tasks. Which material are the parallels made from and how are they finished? The parallels are made from alloy steel and are hardened and ground to give a durable, wear-resistant reference surface suitable for repeated workshop use. How many pieces are included and what lengths are provided? The set contains 18 pieces in total; each parallel has a standard length of 150 mm with a range of heights from 14 mm to 44 mm as listed in the set contents. Are these parallels suitable for use in both hand and machine setups? Yes. The ground faces and robust construction of the VP-118A make them suitable for manual clamping as well as for use in machine fixtures where stable support and repeatability are required. Can the set be used for precise inspection tasks alongside machining? The ground, hardened surfaces and 0.01 mm accuracy make the VP-118A appropriate for support during inspection procedures where a reliable datum is needed. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precision-ground surfaces, 0.01 mm tolerance, and a flexible 14-piece configuration to speed up set-up and secure repeatable alignment. Order the set directly via Metav Werkzeuge or consult our specialists if technical advice is required. Parallel shim set VP-168 — precision-ground S45C shims, 14-piece set by Vertex A precision-ground Parallel shim set VP-168 for accurate workholding, shimming and alignment in machine shops and toolrooms. Precision-ground with 0.01 mm tolerance Flexible 14-piece configuration for varied setups Manufactured from durable S45C carbon steel Stable total mass for slip-resistant placement Make setup measurable with repeatable accuracy The set delivers a measurable improvement in alignment thanks to its 0.01 mm accuracy on ground faces. This level of precision reduces trial-and-error during fixturing and shortens cycle time for part set-up. The precision-ground finish ensures parallel surfaces that sit flat and remain true under light clamping, providing consistent reference planes for tooling and inspection tasks. Measurable tolerances support quality control and reduce rework. Flexible configuration for diverse clamping and shimming tasks With a 14-piece set arranged in graduated thicknesses, the kit allows fine incremental adjustments when shimming or packing workpieces. Each bar is sized for modular stacking and rapid combination, enabling quick adaptation to different workpiece geometries. The assortment format improves workflow efficiency in fixtures and vices, while the solid construction supports repeated handling without dimensional drift. Use the set to simplify alignment, height matching and parallel spacing across a range of jobs. Robust material and handling for daily workshop use Made from S45C carbon steel, the components balance hardness and machinability for long service life in workshop environments. The overall mass of the set contributes to stability when placed in fixtures, minimising movement during manual operations. Ground faces resist deformation from normal clamping forces; routine cleaning and light oiling maintain surface condition. The construction suits regular industrial use and integrates easily into inspection benches and tool cabinets. For precision alignment and reliable fixturing, order the Vertex VP-168 through Metav Werkzeuge or contact Metav Werkzeuge in Emmerich for expert setup advice and local supply Technical data Article number: VP-168 SKU: VP-168 GTIN: 4061905094064 Material: S45C Weight: 3.5 kg Dimensions: 225 x 200 x 90 mm Accuracy: 0.01 mm Pieces per set: 14 Facts Contents: 2x 6.8x15x150 mm Contents: 2x 6.8x18x150 mm Contents: 2x 6.8x21x150 mm Contents: 2x 6.8x25x150 mm Contents: 2x 6.8x27x150 mm Contents: 2x 6.8x31x150 mm Contents: 2x 6.8x35x150 mm Special features Precision-ground surfaces Set for alignment, shimming and spacing Durable carbon steel construction Stable total weight for secure placement Manufactured by Vertex FAQ What tolerance can be expected from the parallel shims? The Parallel shim set VP-168 is ground to an accuracy of 0.01 mm, providing consistent reference faces for precise fixturing and inspection. Which material are the shims made of? The set is manufactured from S45C carbon steel, chosen for a balance of toughness and dimensional stability under regular workshop use. How does the 14-piece configuration support different tasks? Graduated thicknesses in the 14-piece set allow incremental stacking and fine adjustment for shimming, height matching and aligning components in vices and fixtures. Is the set suitable for inspection benches and toolrooms? Yes; the ground faces and robust construction make the set suitable as a reference for inspection benches, toolrooms and repetitive fixturing tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine the hardened, ground alloy-steel construction, precise 0.01 mm accuracy and a comprehensive set of sizes for reliable, repeatable workholding. Order the set directly via Metav Werkzeuge or contact the consultants for tailored advice. VP-200 Parallel support set (ground) by Vertex — hardened alloy steel, 0.01 mm accuracy The VP-200 Parallel support set is a ground, hardened collection of precision parallels and support brackets designed for accurate setting, inspection and workholding in machine shops and metrology routines. Hardened, ground alloy steel Accuracy 0.01 mm Complete set of 18 pieces Includes support brackets for stability Consistent setup precision for repeatable results The VP-200 set provides reliable setup precision thanks to its hardened and ground surfaces and a stated 0.01 mm accuracy. Ground faces minimise contact deformation and ensure parallelism across the set, which in turn reduces measurement error and increases repeatability during clamping or inspection tasks. In practice, this means quicker validation of parts, fewer re‑setups and lower scrap rates when aligning components or transferring references between machines. The robust construction also keeps calibrated geometries stable over repeated use. Versatile size range to streamline fixture preparation A well matched assortment of parallels and supports shortens preparation time at the vice or inspection plate. The set comprises a spectrum of widths and heights plus two support brackets, enabling flexible stacking and stable bearing under clamping pressure. This comprehensive size range simplifies spacing, elevating and aligning workpieces so operations run more efficiently. For users who require consistent datum surfaces across different part geometries, the kit reduces the need to improvise with unsuitable supports and increases throughput by making fixturing predictable. Workshop durability and trustworthy sourcing for industrial use Manufactured from alloy steel, hardened and finished by grinding, the set is built for everyday workshop conditions where resilience matters. The mass and finish of the components contribute to stable contact under load, giving long service life and low maintenance overheads. Sourcing through Metav Werkzeuge adds an extra layer of assurance: established supply from Emmerich acts as a quality filter for the European market and supports reliable replenishment. Together, material choice and responsible distribution reduce downtime and help maintain production rhythm. For precise, repeatable set-ups choose the Vertex VP-200 parallel support set — contact Metav Werkzeuge in Emmerich for expert advice and reliable supply: info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: VP-200 GTIN: 4061905094071 Manufacturer: Vertex Facts Accuracy: 0.01 mm Weight: 15.6 kg Dimensions: 355 x 318 x 85 mm Pieces per set: 18 Special features Material: alloy steel, hardened and ground Content: parallels in varied sizes and two support brackets Set type: ground parallel support set FAQ What applications are suitable for these parallels? The VP-200 parallel support set by Vertex is suited to machine shop workholding, inspection tasks and any application needing precise, stable datum surfaces. How does the 0.01 mm accuracy affect everyday use? An accuracy of 0.01 mm ensures that stacking and aligning with the VP-200 produces consistent reference planes, reducing setup variance in subsequent machining or measurement steps. Are the parallels resistant to workshop wear? Yes — the components are made from alloy steel, hardened and ground, which provides durability and maintains contact geometry under regular clamping loads. Can the set be combined for taller workpiece supports? The included parallels and support brackets are intended for stacking and stable support; correct stacking procedures maintain the stated accuracy and stability. Is this set supplied as a complete kit ready for immediate use? The VP-200 is delivered as a complete kit containing parallels in a range of sizes plus two support brackets for immediate integration into workshop routines. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise parallel shims, a wide size range and compact storage for efficient setup and repeatable setups on the shop floor. Order the set directly via Metav Werkzeuge or consult the team for application advice. VP-018 Parallel shim set with metric sizes and compact tray The VP-018 parallel shim set is a workshop-grade spacer system for aligning and levelling components during fixturing, setup and inspection tasks. 20-piece precision shim set Sizes from 3 to 41 mm in steps Compact storage tray 290×230×73 mm Total weight 2.5 kg Maintain machine alignment and repeatability with precision shims The VP-018 delivers controlled spacing and parallelism where surgical accuracy is required. Each shim is designed for consistent thickness and edge geometry so that alignment and repeatability are improved during assembly, set-up and tool changes. Using a systematic shim strategy reduces time spent on iterative adjustments and supports faster changeovers in production environments. The clear size progression from narrow to wider shims enables fine incremental corrections without adding complex tooling or adjustments. Broad size range for flexible fixturing and set-up Containing two pieces of each width between 3 mm and 41 mm, all with a 150 mm length, the set covers common workshop needs for shimming, spacing and parallel support. This variety allows rapid selection of the required cross-section to correct small misalignments or to build accurate stacked thicknesses for bespoke setups. The ability to combine shims to achieve precise incremental heights reduces reliance on custom-made spacers and supports versatile use across jigs, fixtures and inspection fixtures. Practical storage for tidy workstation workflow The compact tray, measuring 290×230×73 mm, keeps all components organised and protected, making the set easy to transport between machines or to a bench for inspection tasks. A defined location for each shim size speeds up retrieval and return, which contributes to a neater workplace and fewer lost parts. Storing components systematically lowers downtime caused by searching for the right spacer and supports consistent process control in routine operations. Engineered for dependable workshop performance Manufactured under the Vertex range, the set is intended for regular use in workshop environments and bench-level precision tasks. The overall mass of 2.5 kg balances portability and robustness for everyday handling. By integrating this shim set into standard operating procedures, calibration and maintenance cycles become more predictable, lowering the risk of misalignment-related rework and keeping production quality consistent. Contact Metav Werkzeuge for tailored advice on integrating the Vertex VP-018 parallel shim set into existing workflows or to request additional technical details from our specialists at Metav Werkzeuge in Emmerich Technical data Article number: VP-018 GTIN: 4061905084225 eClass: 21170610 Customs tariff number: 73182200 Data Dimensions: 290×230×73 mm Weight: 2.5 kg Pieces per set: 20 Special features Contents: two shims each of widths 3 mm to 41 mm, length 150 mm Product type: parallel shims for height and spacing adjustments Packaging dimensions: 290×230×73 mm FAQ What is included in the VP-018 set? The VP-018 set contains two shims of each width from 3 mm to 41 mm, all 150 mm long, supplied in a compact storage tray for organised workshop use. Can the shims be used for fixture levelling and alignment? Yes, the VP-018 parallel shim set is intended for levelling, spacing and alignment tasks in jigs, fixtures and during machine set-up. Is the VP-018 suitable for mobile usage between machines? The compact tray and a total weight of 2.5 kg make the VP-018 convenient to carry between benches and machines while keeping components organised. How does the size range support fine adjustments? The set’s graded widths enable incremental stacking to achieve precise heights without bespoke spacers, allowing accurate corrections and repeatable setups. Which brand manufactures this shim set? The VP-018 is manufactured by Vertex and designed for reliable workshop performance within industrial and trade applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high precision, hardened and ground alloy steel construction and a comprehensive 28-piece range to speed up machine set-up and fixture alignment; order the set directly via Metav Werkzeuge or consult our product specialists for application advice. VP-128A parallel shim set by Vertex — hardened & ground, 0.01 mm accuracy The VP-128A parallel shim set supplies a hardened, ground selection of parallels designed for precision fixturing and setup work in machine shops and toolrooms. Hardened, ground alloy steel construction High precision ±0.01 mm accuracy Complete 28-piece set, 150 mm length Robust 10.7 kg workshop set Keep tolerances under control with reliable precision The set is engineered to deliver consistent precision during clamping and alignment operations. With an accuracy of 0.01 mm, the collection of parallels allows repeatable shimming between machine table and workholding devices, reducing set-up time and scrap rates. The precisely ground faces ensure true contact and even pressure distribution, which means faster machine warm-up to production tolerances and more predictable results in serial work. Built for everyday workshop use and long service life Constructed from hardened and ground alloy steel, the components withstand the rigours of the shop floor while retaining flatness and surface finish. The substantial set weight and solid material choice contribute to stability when used under vises or alongside clamping fixtures. The finish minimises surface deformation during tightening, so integrity of the setup is preserved and frequent replacements are avoided, supporting uninterrupted production. Versatile composition for a wide range of setups The 28-piece set is organised to cover typical clearance and height requirements in fixturing: every piece measures 150 mm in length and comes in a mix of widths and thicknesses to bridge gaps and set exact heights quickly. The selection simplifies incremental adjustment and enables fine-tuning without improvised spacers. Because the set is grouped and graded by dimension, locating the right shim is efficient, helping reduce machine downtime between jobs. Practical handling, storage and quality assurance The parallels are supplied as a matched set to support orderly storage and rapid selection during changeovers. The ground surfaces resist fretting when paired with hardened tooling, and routine cleaning plus light oiling after use maintains performance. Metav’s European distribution centre acts as a quality filter for the market, ensuring that delivery and stock consistency meet industrial expectations, so workshops receive tools that perform to specification and last. For purchasing or technical clarification on the Vertex VP-128A set, contact Metav Werkzeuge for tailored advice and reliable supply to your workshop bench Technical data Article number: VP-128A GTIN: 4061905093715 Manufacturer: Vertex Core data Accuracy: 0.01 mm Weight: 10.7 kg Dimensions: 390 x 292 x 82 mm Pieces per set: 28 Length per piece: 150 mm Special features Material: hardened and ground alloy steel Set composition: 2x 10x14x150 mm, 2x 10x16x150 mm, 2x 10x18x150 mm, 2x 10x20x150 mm, 2x 10x22x150 mm, 2x 10x24x150 mm, 2x 10x26x150 mm, 10x28x150 mm, 2x 10x30x150 mm, 2x 10x32x150 mm, 2x 10x35x150 mm, 2x 10x40x150 mm, 2x 10x45x150 mm and 2x 10x50x150 mm Ground faces for uniform contact Suitable for fixturing and precision set-up FAQ What level of accuracy can be expected from these parallels? The VP-128A parallel shim set from Vertex achieves an accuracy of 0.01 mm, making it suitable for precision fixturing and repeatable set-up tasks in toolrooms and production environments. What material are the shims made from and how does that affect performance? The set is made of hardened and ground alloy steel, which provides wear resistance and dimensional stability; the material choice supports reliable clamping without rapid surface degradation. Which sizes are included in the set and how long are the parallels? Contents include a graded selection from 14 mm up to 50 mm widths at 150 mm length per piece as listed in the technical data, arranged to offer fine incremental adjustments during set-up. Are these parallels suitable for routine workshop clamping and precision measurement setups? Yes, the design and finish of the VP-128A make the collection appropriate for both routine clamping and precision alignment tasks where true contact and minimal variation are required. How should the parallels be stored to maintain their flatness and finish? Store the parallels dry, in their organised set, and apply a light protective oil after cleaning; keeping them stacked or loose with contaminants can cause surface marks and reduce repeatability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a high clamping force together with fine positional accuracy and robust cast iron construction to maintain process stability and reduce rework. The reliable pneumatic actuation and compact footprint support faster cycling on machining centres. Order the pneumatic precision machine vice directly via Metav Werkzeuge or ask our consultants if needed. Pneumatic Precision Machine Vice VMC-5P — 6,000 kgf clamping force, 0–150 mm opening (Vertex) The Pneumatic Precision Machine Vice VMC-5P is a pneumatically operated clamping solution designed for high-precision workholding on milling machines and machining centres. 6,000 kgf clamping force 0–150 mm adjustable jaw opening Cast iron construction for stability 0.01 mm positioning accuracy Stable clamping for consistent part quality The vice’s 6,000 kgf clamping force and cast iron body create a stable contact between workpiece and table, reducing vibration and tool chatter during heavy cutting. This stability translates into fewer rejects and less finish machining, which improves throughput in batch production. With a clearly specified 0–150 mm jaw travel and rigid construction, setups remain reproducible; once clamped, the workpiece is held securely for milling, drilling and finishing operations. The combination of mass and stiffness is particularly beneficial where dimensional repeatability is required across multiple cycles. Faster cycles through pneumatic actuation and precise positioning Pneumatic actuation provides a rapid and reliable clamping sequence that shortens cycle times compared with manual tightening. The actuated mechanism is designed for integration with existing machine tool pneumatics, enabling automated clamping within programmed cycles. Positioning is specified to 0.01 mm, which means that the clamping unit supports high repeatability and minimal repositioning during secondary operations. For workshops aiming to increase efficiency, the pneumatically controlled vice reduces idle time between operations while ensuring the same high degree of precision for each clamped component. Compact footprint and practical workshop integration With external dimensions of 130 × 520 × 160 mm and a mass of 38 kg, the vice fits readily on standard machine tables without excessive overhang. Its pneumatic actuation removes the need for prolonged manual handling, and the durable cast iron construction minimises wear under continuous use. The clamping unit is supplied under the designation VMC-5P and has been engineered for straightforward alignment and routine maintenance; routine inspection focuses on pneumatic lines and sealing elements, keeping downtime low. Clear technical specifications aid planning for fixtures and allow uncomplicated integration into production lines. Contact Metav Werkzeuge in Emmerich to discuss how the Vertex VMC-5P’s 6,000 kgf clamping force and 0.01 mm accuracy can streamline production — email info@metav-werkzeuge.com or call +49 2822 7131930 for detailed technical advice Technical data SKU: VMC-5P GTIN: 4061905089978 ECLASS: 21020601 ETIM: EC002173 Numbers Clamping force: 6,000 kgf Jaw opening: 0–150 mm Accuracy: 0.01 mm Dimensions: 130 × 520 × 160 mm Weight: 38 kg Special features Material: cast iron Type: pneumatic Manufacturer: Vertex Suitable for integration on milling machines and machining centres FAQ What machining tasks is this vice suited for? The vice is designed for general machining tasks on milling machines and machining centres; the VMC-5P by Vertex is suitable for operations requiring robust clamping and fine positional accuracy. How accurate is the clamping repeatability in production? Repeatability is specified to 0.01 mm, so the vice maintains consistent part position across multiple cycles, supporting tight tolerances during batch production. What are the dimensional and weight considerations for mounting? External dimensions are 130 × 520 × 160 mm with a weight of 38 kg, allowing straightforward mounting on standard machine tables with appropriate fixture planning. Is the clamping force sufficient for heavy cutting operations? With a clamping force of 6,000 kgf, the unit provides high holding power for demanding cut conditions; the cast iron body contributes to overall stability during heavy machining. What maintenance is required for the pneumatic system? Regular checks of the pneumatic lines and seals are recommended; routine inspection and basic service keep the Vertex VMC-5P operating reliably over extended production runs. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high-strength cast steel, ±0.01 mm accuracy and compact dimensions for reliable, repeatable fixturing in inspection and small-batch machining. Order the component directly via Metav Werkzeuge or consult our specialists for application support. VR-6 angle plate — Vertex precision workholding with high-strength cast steel and 0.01 mm accuracy The VR-6 angle plate is a compact, robust fixturing element designed for precision workholding in inspection benches and machine tables, offering stable positioning for small components and measurement setups. High-strength cast steel construction Precision accuracy ±0.01 mm Compact dimensions 150 x 115 x 126 mm Solid 3.8 kg for vibration damping Reliable alignment that preserves measuring certainty The angle fixture delivers consistent positional accuracy thanks to its ±0.01 mm accuracy, a level of precision that supports repeatable measurements and tight-tolerance machining. Built from high-strength cast steel, the unit combines material rigidity with thermal stability so that reference faces retain alignment during routine use. For workshops that perform frequent inspection cycles, the precise tolerances reduce the need for repeated realignment and streamline the measurement workflow. Technical features such as machined reference surfaces ensure compatibility with calibrated gauges and standard clamping hardware while preserving surface quality over many cycles. Mass and compactness that improve setup efficiency With external dimensions of 150 x 115 x 126 mm and a mass of 3.8 kg, the angle plate offers a balance between portability and stability. The unit’s weight increases contact pressure on the machine table or inspection plate, improving vibration damping and reducing chatter during manual positioning. Its compact footprint makes it suitable for smaller benches and tight fixtures, while the solid construction simplifies clamping arrangements and minimises the need for auxiliary supports. The compact design therefore shortens set-up time and supports efficient batch inspection without sacrificing the mechanical stability required for precision work. Practical design for workshop integration and longevity The component has been manufactured to integrate easily into existing workflows: machined datum faces are ready for immediate clamping and the robust casting resists deformation during normal workshop handling. The robust workholding nature of the plate makes it suitable for both inspection and light machining tasks where precise angular positioning is required. Minimal routine maintenance—cleaning and protection against heavy impact—keeps the part serviceable for years. Metav’s presence in Emmerich acts as a local quality filter for the European market, pairing product availability with technical advice so that selection matches the application and production requirements. Contact Metav Werkzeuge today for tailored application advice or to secure the Vertex VR-6 angle plate for precision fixturing; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VR-6 GTIN: 4061905084041 ECLASS: 21020601 Core specifications Dimensions: 150 x 115 x 126 mm Accuracy: 0.01 mm Weight: 3.8 kg Materials & features Material: high-strength cast steel Machined reference faces for precise positioning Compact, robust design for inspection and light machining FAQ What positional tolerance does the angle plate provide? The Vertex VR-6 angle plate guarantees an accuracy of ±0.01 mm, making the component suitable for precision measurement and fixture tasks where tight tolerances are required. What is the plate made from and why does that matter? The unit is manufactured from high-strength cast steel, which provides rigidity and good vibration damping, ensuring stable reference faces during inspection and machining operations. For which workshop tasks is this angle plate best suited? The angle plate is suitable for inspection benches, small machine tables and jigs where precise right-angle fixturing and stable workholding are necessary. How should the component be maintained to ensure longevity? Routine maintenance for the VR-6 angle plate consists of keeping machined surfaces clean, avoiding severe impacts and storing the piece in a dry environment to preserve accuracy and surface condition. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan