Ausstattungen für Fräsmaschinen

Take advantage of the combination of a standard 7/8-9" threaded interface, compact 40 x 25 mm dimensions and a low mass of 0.12 kg for reliable, low-inertia connections in tooling and fixturing applications. Order the flange directly via Metav Werkzeuge or ask the consultants for integration advice. Flange 4517I by Vertex — 7/8"-9" threaded, 40 x 25 mm The Flange 4517I is a compact mechanical coupling component designed to provide a standard threaded connection for tooling, fixtures and accessory mounting in industrial assemblies. Standard 7/8-9" threaded interface Compact 40 x 25 mm flange profile Lightweight 0.12 kg for minimal added mass Compatible with Vertex tooling systems Reliable threaded connection for repeatable assemblies The flange offers a standard 7/8-9" threaded interface, providing a secure mechanical joint that simplifies interchangeability with other standard components. The use of a recognised thread form ensures consistent torque behaviour and straightforward replacement in maintenance routines. Delivered as a precision-made coupling element, the component reduces alignment uncertainty in assemblies where repeatability matters, translating into fewer set-up cycles and measurable time savings during retooling. Space- and weight-efficient design that improves dynamics With compact 40 x 25 mm dimensions and a mass of 0.12 kg, this flange is tailored for installations where space is limited and added inertia must be minimised. The reduced mass contributes to lower centrifugal loads in rotating sub-assemblies and helps to maintain balance in precision equipment. In retrofit situations or new machine builds, using a low-mass flange can improve cycle consistency and reduce wear on bearings and drive elements, supporting longer service intervals and steadier process performance. Straightforward integration for versatile industrial use Manufactured for compatibility within Vertex product lines, the component facilitates quick assembly on existing fixtures and stands. Clear identification via SKU 4517I and the GTIN simplifies procurement and inventory management. The design supports common fixturing tasks such as mounting sensors, adapters or auxiliary tooling, providing a pragmatic solution for production, jigs and test rigs where a reliable mechanical interface is required. For assured compatibility with Vertex components and fast supply from our European quality hub, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for consultancy and order guidance Technical data Article number: 4517I GTIN: 4061905089220 eClass: 37029205 Brand: Vertex Facts Dimensions: 40 x 25 mm Weight: 0.12 kg Thread: 7/8-9" Special features Designation: Flange Category: Vertex Images available: 4518-main.jpg, 4518-detail.jpg, 4518-technische-zeichnung.jpg FAQ What threading standard does the flange use? The flange uses a standard 7/8-9" threaded interface, enabling compatibility with common threaded fixtures and accessories for Vertex flange SKU 4517I. Is this flange suitable for rotating assemblies where low inertia is required? Yes. The compact 40 x 25 mm form factor and 0.12 kg mass make the Vertex flange 4517I appropriate for applications where minimising added inertia benefits rotational balance and bearing life. How is the flange identified for procurement and stock control? Identification is via SKU 4517I and GTIN 4061905089220; both can be used when ordering the Vertex flange to ensure correct part selection. Can the flange be used to mount sensors or auxiliary tooling? The flange is designed as a mechanical coupling element suitable for mounting sensors, adapters and auxiliary tooling in fixturing and assembly contexts, providing a standard threaded attachment point. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining multiple input-voltage compatibility, an integrated halogen bulb and a compact 1.47 kg assembly, this unit delivers reliable low-voltage supply and straightforward in-field replacement. Order the module directly via Metav Werkzeuge or contact our consultants for tailored advice. V-T17 transformer and bulb — Transformer with multi-voltage input V-T17 is a combined transformer and halogen bulb assembly designed to supply stable low-voltage power for VHL halogen lamps in workshop and industrial applications. Transformer with multiple input voltages Includes halogen bulb for VHL lamps Compact assembly, weighs 1.47 kg Ready for quick replacement in workshops Stable low-voltage power that reduces downtime The integrated transformer converts mains supply to a consistent low-voltage output (12 V or 24 V), supporting three selectable input ranges: 415 V, 380 V and 230 V. This versatility enables straightforward integration into different electrical systems without extensive rewiring. The stable output reduces lamp flicker and prevents erratic performance, which in turn minimises production interruptions and maintenance cycles. The design focuses on functional reliability rather than decorative extras, delivering measurable operational benefits for machine rooms and lighting circuits. Ready-to-fit assembly for rapid on-site replacement Supplied as a matched transformer and halogen bulb set, the unit is intended for quick swap-outs when a lamp reaches end of life. The compact construction and overall weight of 1.47 kg make handling and installation more efficient during maintenance operations. By having the power converter and lamp matched, electrical compatibility is ensured at delivery, cutting diagnostic time and simplifying inventory management for maintenance teams. The result is faster return-to-service and lower labour costs per replacement event. Built for workshop compatibility and dependable service Manufactured by Vertex, the assembly is targeted at practical industrial use where dependability matters. The combined configuration reduces the number of separate components to stock and eliminates mismatched pairings that can cause premature failure. The straightforward electrical specification supports planning and procurement: it is a pragmatic choice where consistent light output and predictable service intervals are priorities. Sourcing via an experienced distributor provides an additional layer of quality assurance for European workshops and technical buyers. Contact Metav Werkzeuge in Emmerich for ordering or technical consultation; email info@metav-werkzeuge.com, phone +49 2822 7131930, WhatsApp +49 170 2837271 — Metav’s team will advise on compatibility and delivery options Technical Data Article number: V-T17 GTIN: 4061905092398 Manufacturer: Vertex Weight: 1.47 kg Voltage options: 415V-12/24; 380V-12/24; 230V-12/24 Facts Weight (kg): 1.47 Input voltages: 415 V, 380 V, 230 V Output voltages: 12 V, 24 V Special features Transformer and halogen bulb included Designed for halogen lamp VHL SKU: V-T17 Brand: Vertex FAQ What input voltages does the unit accept? The unit accepts mains inputs of 415 V, 380 V or 230 V and provides low-voltage outputs of 12 V or 24 V for VHL halogen lamps. Is the halogen bulb supplied with the transformer? Yes, the V-T17 is delivered as a combined transformer and halogen bulb assembly suitable for VHL luminaires. How heavy is the complete assembly? The complete assembly weighs 1.47 kg, facilitating straightforward handling during maintenance. Can this assembly be used in different electrical systems without modification? The selectable input ranges (415 V, 380 V, 230 V) allow integration into various mains supplies without extensive modification, ensuring flexible deployment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of robust stability and precise compatibility ensures dependable clamping for demanding workshop tasks; benefit from the rigid mounting platform and compact footprint to streamline setup and machining. Order the base directly via Metav Werkzeuge or consult the team for application advice. HSO-8 base for Vertex VHO vises — rigid mounting platform, 35 kg The HSO-8 base is a dedicated mounting plate designed to provide a stable foundation for Vertex VHO vises in professional workshops and production environments Solid 35 kg base Compatible with Vertex VHO vises Compact footprint 415 x 413 x 50 mm Precision-machined mounting surface Stable foundation that reduces vibration and improves accuracy This mounting plate delivers a stable platform for clamping applications, with a mass of 35 kg that helps dampen vibration and supports consistent machining results. The compact footprint of 415 x 413 x 50 mm minimises the space required on the machine table while offering a broad contact area for reliable fixation. By providing a heavier, immobile base, the unit reduces micro-movements during tightening and operation, which in turn supports better repeatability and contributes directly to higher workpiece quality. The design prioritises dependability for repetitive production tasks. Engineered for quick integration and precise alignment The unit features a precision-machined mounting surface that eases alignment with the clamping system and machine table. Precision in this context refers to a finely finished flatness and consistent datum references that make positioning and re-positioning straightforward, even for operators with limited experience. Clear mounting points and defined locating features (as supplied) facilitate fast assembly and reduce machine downtime. The result is a solution that supports efficient workflows and shorter set-up times without compromising on the exactness required for accurate machining. Built to support workshop efficiency and long service life Designed for professional use with Vertex VHO vises, the base improves operational reliability and contributes to a predictable production flow. Robust mass and finish help reduce maintenance requirements, since less frequent re-adjustment is needed after initial set-up. The compatibility with Vertex clamping technology means fewer adaptations or bespoke fixtures are necessary, simplifying inventory and reducing planning effort. For workshops aiming to standardise clamping solutions, this mounting plate offers a practical way to increase throughput while maintaining process stability. Choose the Vertex HSO-8 base for reliable clamping performance and contact Metav Werkzeuge for tailored advice or fast supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: HSO-8 GTIN: 4061905089329 Description: Base for Vertex VHO vises Facts Dimensions: 415 x 413 x 50 mm Weight: 35 kg Special features Compatibility: for Vertex VHO vises Finish: precision-machined mounting surface Intended use: mounting and stabilising clamping systems FAQ What is the weight of the HSO-8 base? The HSO-8 base has a mass of 35 kg, providing a stable mounting platform for machining tasks. Which vises are compatible with this base? This mounting plate is designed for use with Vertex VHO vises and integrates directly with that clamping series. What are the exact dimensions of the base? The base measures 415 x 413 x 50 mm, offering a compact footprint with a broad contact surface. Is information available about the mounting surface quality? The product data specifies a precision-machined mounting surface, intended to assist with accurate alignment and repeatability. Can the HSO-8 reduce set-up time in a workshop? Yes; by providing defined mounting features and a stable platform, the HSO-8 helps shorten set-up and repositioning times for repetitive production tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust, dust-protected halogen lamp combined with an adjustable arm and flexible voltage options for reliable workshop illumination; order directly via Metav Werkzeuge or ask the consultants for advice on system integration. VHL-300L Halogen Lamp by Vertex — dust-protected light with adjustable arm The VHL-300L is a dust-protected halogen lamp intended for inspection and workshop illumination, offering a compact adjustable arm for targeted lighting and multi-voltage operation. Dust-protected lamp head with IP67 rating Adjustable arm 430 x 400 mm Compatible with 55 W incandescent bulb Supplied with 1.8 m power cable Precise, stable illumination for inspection and measuring work The combination of a dust-protected light head with an IP67 rating and an articulated arm delivers consistent, glare-free illumination exactly where it is needed. The sealed lamp head keeps dust and contaminants away from the light source, reducing the frequency of cleaning and the risk of inspection errors. Because the lamp accepts a standard 55 W incandescent bulb, replacement is straightforward and cost-effective, while the fixed luminous characteristics of a halogen source ensure accurate visual contrast for fine tasks such as gauging and inspection. Flexible mounting and targeted reach to increase workflow efficiency An articulated arm measuring 430 x 400 mm enables precise positioning over benches, measuring stations or machine tables, improving ergonomics and reducing the time spent reorienting workpieces. The unit is lightweight at 2.4 kg, which simplifies handling and mount adjustments without imposing excessive load on fixtures. The included 1.8 m cable supports straightforward installation and versatile placement close to power sources, and the lamp can be configured for 110 / 220 / 380 / 24 V operation to suit diverse industrial power supplies. Robust design that reduces downtime and maintenance With the lamp head sealed to IP67 and the arm meeting IP20 protection, the VHL-300L separates the sensitive lighting element from the kinematic components, prolonging service life under workshop conditions. The dust-protected construction minimises ingress-related failures and limits maintenance interruptions. The simple electrical layout and standard bulb compatibility further cut servicing time, meaning the illumination system contributes to steady production flow rather than unexpected stoppages. Versatile applications and straightforward integration in the workshop Engineered for focused task lighting, the unit supports inspection benches, measuring stations and general-purpose workshop illumination where reliable, high-contrast light is required. The compact footprint and articulated reach make it suitable for retrofitting to existing fixtures or adding to new workstations. Supplied by Vertex, the lamp aligns with common industrial workflows and can be specified where predictable, high-quality illumination is essential for visual inspection and manual measuring tasks. Contact Metav Werkzeuge for tailored advice on the Vertex VHL-300L, delivery from Emmerich and assistance with system compatibility — info@metav-werkzeuge.com / +49 2822 7131930 Technical data Article number: VHL-300L GTIN: 4061905083457 Product type: Halogen lamp Protection: Dust-protected Facts Weight: 2.4 kg Arm dimensions: 430 x 400 mm Cable length: 1.8 m Voltage: 110 / 220 / 380 / 24 V (configurable) Compatible bulb: 55 W incandescent bulb Special features Lamp head: IP67 Arm: IP20 Supplied accessory: 1.8 m cable Intended use: Workshop and inspection lighting Manufacturer: Vertex FAQ What type of bulb does the VHL-300L use? The VHL-300L is compatible with a 55 W incandescent (halogen) bulb; the standard fitting provides predictable luminous output for inspection tasks. Is the lamp suitable for dusty environments? Yes, the light head of the VHL-300L is dust-protected and rated IP67, making it suitable for environments with particulate exposure while the arm carries IP20 protection. Can the VHL-300L be used with different power supplies? The VHL-300L supports 110 / 220 / 380 / 24 V configurations, allowing integration into various industrial power systems; specify the required voltage at purchase. How large is the reach provided by the lamp arm? The articulated arm measures 430 x 400 mm, offering targeted positioning for benches, measuring stations and close-up inspection tasks. Is a power cable included with the lamp? Yes, the VHL-300L is supplied with a 1.8 m power cable to simplify installation near standard power outlets. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of reliable, waterproof illumination and universal mains compatibility to maintain uninterrupted machine operation; the IP67 rating and 100–240 V range support continuous use in demanding workshop environments — order directly via Metav Werkzeuge or consult our advisors for tailored advice. VLED-W13 LED machine lamp — waterproof, universal-voltage work light VLED-W13 is a compact LED machine lamp designed for precise, durable illumination on workshop machinery and production benches IP67 protection for wet environments Wide voltage 100–240 V compatibility Robust yet portable at 2.2 kg Clear LED illumination for machinery Dependable illumination that keeps production moving A focused, stable light source reduces setup time and inspection errors in machining and assembly. The LED technology delivers consistent brightness with minimal thermal drift, which supports accurate visual checks and safe operation. Thanks to the IP67 classification, the lamp remains functional where splash, coolant or dusty conditions occur, so machine uptime is preserved and maintenance intervals are extended. The design emphasises long-term reliability and straightforward replacement when required. Universal power compatibility for flexible workshop use Universal mains operation (from 100–240 V) enables use across different sites and international installations without additional converters. This universal voltage capability simplifies logistics for service teams and contractors, allowing the lamp to be redeployed between machines and locations. At 2.2 kg the unit is substantial enough to remain stable in a workshop environment while still being manageable for repositioning. Practical compatibility reduces sourcing complexity and ensures predictable performance in mixed-voltage facilities. Workshop-ready construction and straightforward upkeep Constructed for the demands of a production environment, the lamp’s waterproof rating and protective enclosure keep internal components safe from contaminants. This reduces the likelihood of unexpected failures and supports a safer working area by maintaining reliable illumination even under adverse conditions. Routine servicing is simplified because the lamp focuses on essential functionality rather than complex electronics, so scheduled checks return lasting value and predictable operational behaviour. For tailored technical advice or to arrange procurement of the Vertex VLED‑W13, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 to discuss suitability for specific machines and delivery options Technical data Article number: VLED-W13 GTIN: 4061905005671 ETIM: EC001959 eCl@ss: 27110640 Core specifications Voltage: 100V-240V Protection class: IP 67 Weight: 2.2 kg Length: 448 Features & materials Product type: LED machine lamp Brand: Vertex Feature: waterproof Images available: main and detail FAQ What does IP67 mean for workshop use? IP67 indicates the lamp is dust-tight and protected against temporary immersion, so it withstands splash, coolant and dust commonly encountered in machining environments. Is the lamp compatible with international mains supplies? Yes, the universal 100–240 V range of the VLED‑W13 permits direct connection to most national mains supplies without additional converters. How heavy is the unit and is it portable between machines? The unit weighs 2.2 kg, which balances stability and portability for repositioning across machines or workstations. Can the lamp be used in coolant-prone environments? The waterproof design and IP67 protection make the light suitable for areas exposed to coolant sprays and similar contaminants. Who manufactures the lamp and where can procurement advice be obtained? The lamp is a Vertex product; procurement and technical guidance are available through Metav Werkzeuge in Emmerich. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust, anodised-aluminium construction and a precise 450 mm length for consistent slot coverage; supplied as a practical set of six for flexible workshop layout. Order the VST-18 directly via Metav Werkzeuge or ask the Metav consultants if technical clarification is required. VST-18 Router table slot cover — anodised aluminium, 450 mm The VST-18 is a cover designed for router table slots, intended to close a standard 18 mm groove and reduce dust ingress while maintaining a low-profile work surface. Anodised aluminium construction Fits 18 mm router table slot 450 mm length for broad coverage Supplied as a set of six Light weight, only 0.6 kg Cleaner benches and improved operator safety A sealed working area reduces airborne dust and the risk of small offcuts catching under the workpiece. The anodised aluminium profile creates a smooth transition across the table surface, preserving fence alignment and helping to prevent workpiece snagging. With a low 13.3 mm height and a continuous 450 mm length per section, the system keeps the tool zone tidy without compromising visibility of the cutter. This delivers a measurable improvement to workshop ergonomics and process reliability while also simplifying routine clean-up. Durable construction for long service life Manufactured from anodised aluminium, the cover provides corrosion resistance and a scratch‑resistant finish suitable for everyday workshop use. The robust material reduces the need for frequent replacement and supports consistent performance under regular mechanical stress. The moderate mass (0.6 kg) ensures ease of handling during fitting and reconfiguration, while the profile resists deformation that would otherwise affect table flatness and routing precision. This combination of durability and stability underpins predictable machining results. Modular set for adaptable workshop layouts Supplied as a set of six, the sections can be arranged to cover wider tables or replaced individually as wear occurs, minimising downtime. Each section is tailored to fit a 18 mm slot width, enabling straightforward installation into standard router tables without custom machining. The modular approach simplifies inventory management for workshops: damaged segments are replaced rather than the entire cover, which conserves resources and reduces lifecycle costs. The lightweight, anodised elements also support quick swaps during setup changes. Secure a VST-18 set from Metav Werkzeuge to improve workstation cleanliness and safety — contact Metav Werkzeuge in Emmerich for order details or further product advice via info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Technical data SKU: VST-18 GTIN: 4061905092022 Manufacturer: Vertex Dimensions & weights Length: 450 mm Height: 13.3 mm Weight: 0.6 kg Slot width compatibility: 18 mm Materials & set Material: anodised aluminium Supplied: set of 6 eClass: 21189223 FAQ How wide a slot does this cover fit? The cover is designed to fit a slot width of 18 mm, making it suitable for standard router table grooves and compatible fixtures. What is the length of each section and how many are supplied? Each section measures 450 mm in length and the product is supplied as a set of six, allowing flexible coverage and easy replacement of individual segments. Is the material suitable for everyday workshop use? Yes, the anodised aluminium construction provides corrosion resistance and a hard-wearing finish intended for regular workshop environments. Will the cover affect fence alignment or workpiece clearance? The low-profile design (13.3 mm height) maintains a smooth table surface and is intended to preserve fence alignment while reducing snagging; precise results depend on correct installation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining selectable 1° or 5° indexing with a large 450 x 450 mm working surface and a secure clamping capacity of 2,200 kgf, this table delivers reliable, repeatable angular set-ups for machining and inspection. Order the VIT-450-1 directly via Metav Werkzeuge or consult our specialists if configuration advice is required. VIT-450-1 Precision Indexing Table by Vertex — 450 x 450 mm, selectable 1°/5° The VIT-450-1 is a precision indexing table designed for accurate angular positioning and heavy-duty fixturing in milling, drilling and inspection applications. 450 x 450 mm rotary table surface Selectable indexing: 1° or 5° steps High clamping force: 2,200 kgf Substantial 205 kg mass for stability Precise angular control for consistent machining results The selectable 1° or 5° indexing mechanism provides clear, measurable angular steps that simplify repeatable set-ups in series production or prototype work. By offering two indexing increments, the table reduces time spent on manual alignment while maintaining a predictable process flow — a practical advantage when machining components that require multiple indexed operations. The clear stepping supports fixture designers and machinists in creating jigs with defined orientation points, improving throughput and reducing rework. Secure clamping and mass for vibration damping A clamping capacity of 2,200 kgf combined with a unit mass of 205 kg delivers a solid foundation for stable machining. The inherent mass of the assembly helps to dampen cutting vibrations and supports heavy or asymmetrical workpieces without frequent reclamping. The inclusion of a T-slot 18 mm interface on the table allows for standard clamping elements and modular fixturing, ensuring compatibility with common workshop tooling and enabling fast reconfiguration between jobs. Workshop integration and practical handling With a clear working surface of 450 x 450 mm and an overall height of 170 mm, the table integrates smoothly with milling machines and inspection benches where ample support and low profile are required. The rotary top operates both clockwise and counter-clockwise, which facilitates flexible machining strategies and simplifies orientation changes. Supplied under Vertex quality standards and available through Metav Werkzeuge — a long-standing precision partner for industry and craft — the unit is presented as a dependable component for production and measurement setups. For tailored advice, configuration support and fast delivery from Metav Werkzeuge’s quality centre in Emmerich, contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the Vertex VIT-450-1 and its fit for specific applications. Technical Data Article number: VIT-450-1 GTIN: 4061905089923 Manufacturer: Vertex ECLASS: 36600310 Facts Dimensions: 450 x 450 mm Height: 170 mm Weight: 205 kg Clamping force: 2,200 kgf Indexing resolution: 1° or 5° T-slot: 18 mm Accuracy: 3 Special features Table rotates clockwise and counter-clockwise Robust mass for vibration damping Suitable for milling, drilling and inspection fixtures SKU: VIT-450-1 FAQ What indexing steps are available with this table? The unit offers selectable indexing at 1° or 5°, allowing the VIT-450-1 to be set up for fine or coarse angular increments depending on the operation. How strong is the clamping on the table? Clamping strength is rated at 2,200 kgf, providing secure fixation for heavy-duty machining; the high clamping capacity complements the table’s substantial 205 kg mass. What are the table dimensions and mounting options? The working surface measures 450 x 450 mm, with T-slot 18 mm for standard clamping hardware; the overall height is 170 mm, helping to integrate the table into typical milling setups. Can the table rotate in both directions? Yes — the rotary top operates both clockwise and counter-clockwise, which supports flexible fixturing and orientation changes during complex operations. Is the table suitable for use in inspection applications? The combination of precise indexing, stable mass and secure clamping makes this Vertex indexing table well suited to both machining and inspection tasks where repeatable angular positioning is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high indexing accuracy, robust clamping and a compact 450×450 mm table to streamline setup times and machining repeatability. Order the indexing table directly via Metav Werkzeuge or consult the in-house specialists for application advice. VIT-450-5 Precision Indexing Table by Vertex — 450×450 mm, 1°/5° indexing The VIT-450-5 is a precision indexing table designed for machining and inspection tasks, providing reliable angular division and secure workholding for medium to heavy setups. High clamping force 2200 Kgs 450 × 450 mm table surface Indexing in 1° or 5° increments Robust 205 kg construction Accurate, repeatable indexing for precision workflows The VIT-450-5 is engineered to deliver consistent precision across repeated operations. With selectable 1°/5° indexing, the unit enables fine angular subdivision for multi-axis or fixture-based work, reducing the need for secondary adjustments. The device is specified to accuracy class 3, which indicates controlled deviation limits suitable for tight-tolerance tasks; this technical assurance supports process reliability and reduces inspection rework. Clear mechanical indexing reduces cycle variability and shortens setup time in production environments where repeatability is essential. Secure clamping and heavy-duty stability for machining operations A clamping force of 2200 Kgs ensures fixtures remain stable under cutting loads, while the substantial base mass of 205 kg dampens vibration and improves surface finish. The generous 450×450 mm table area accommodates larger jigs and multiple workpieces, and the integrated T-slot 18 mm supports a wide range of clamping elements and tooling plates. These characteristics translate into safer, more efficient machining processes and lower tool wear through reduced micro-movement during cutting. Practical integration and flexible handling in the workshop The rotary table rotates clockwise and counter-clockwise, allowing toolpaths and inspection routines to be executed without repositioning the workpiece. A compact vertical profile with a 170 mm height facilitates integration into inspection benches and machining centre pallets. The design supports common mounting schemes and makes it straightforward to retrofit into existing fixtures. For purchasers seeking dependable supply and technical competence, Metav Werkzeuge acts as a quality filter for the European market, combining broad product availability with application knowledge. Select the Vertex VIT-450-5 for reliable, high-precision indexing—contact Metav Werkzeuge for tailored application advice via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: VIT-450-5 GTIN: 4061905091445 Manufacturer: Vertex Facts Table size: 450 × 450 mm Height: 170 mm Weight: 205 kg Clamping force: 2200 Kgs Accuracy class: 3 Indexing steps: 1° or 5° Special features Rotates clockwise and counter-clockwise T-slot: 18 mm FAQ What indexing increments are available? The VIT-450-5 offers selectable 1° or 5° indexing to suit fine or coarser angular division requirements. Is the table suitable for heavy machining operations? Yes, the unit’s 2200 Kgs clamping force and 205 kg construction make the VIT-450-5 appropriate for medium to heavy machining loads. How is the workpiece secured to the table? Workpieces are secured using the T-slot 18 mm system combined with the table’s high clamping force for stable fixturing. Can the table be used for inspection as well as machining? The precision indexing and compact 170 mm profile allow the VIT-450-5 to be integrated into inspection benches and measurement setups. What accuracy can be expected during repeated indexing? The device is specified as accuracy class 3, ensuring repeatable angular positioning within defined tolerance bands. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, expandable solution that combines a small footprint and lightweight design to protect machines and operators while keeping retrofits simple; order directly via Metav Werkzeuge or consult the team for integration advice. VGC-4550F expandable machine guard – compact 450 x 500 mm, Vertex The VGC-4550F is an expandable machine guard designed to provide targeted protection for production cells and workshop machinery while allowing straightforward adaptation to changing layouts. Compact 450 x 500 mm footprint Lightweight at 0.7 kg for easy handling Expandable modular design for retrofit Front caliper mounting compatible Built for compact production environments The machine guard focuses on space-efficient protection: with a 450 x 500 mm footprint and a lightweight construction, it minimises occupied floor and machine space while easing handling during installation or repositioning. The reduced mass lowers manual handling effort and speeds up adjustments during line changes, which supports quicker changeovers and contributes to higher overall equipment availability. Modular expansion keeps processes flexible An expandable design enables phased integration into existing cells without major rework. The modular concept allows additional panels or extensions to be fitted as process requirements evolve, so the protective envelope can be enlarged to match new tools or fixtures. Compatibility with front-side tool mounting ensures that precision measuring devices such as calipers can be incorporated without compromising access or visibility. Practical benefits for safety and operational continuity By shielding moving parts and delineating hazardous zones, the guard helps to reduce the risk of accidental contact and unplanned downtime. The durable, service-friendly concept is intended to support routine maintenance rather than impede it: access points are designed so that inspection and minor adjustments can be completed quickly, reducing lost production time. The result is a pragmatic balance between operator protection and uninterrupted workflow. Straightforward integration into workshop layouts The unit is conceived for easy attachment to machine frames or mounting brackets commonly found in production environments; its compact size makes it suitable for retrofits where space is limited. The construction supports visible mounting of measuring tools on the front face, maintaining measurement accessibility while preserving the protective function. Supply chain reliability and spare-part access are facilitated by working with established manufacturers and authorised distributors. For retrofit projects and layout planning, specify the expandable Vertex VGC-4550F with Metav Werkzeuge to ensure correct sizing and compatibility — contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VGC-4550F GTIN: 4061905089879 Manufacturer: Vertex Facts Dimensions: 450 x 500 mm Weight: 0.7 kg eClass: 24322502 Special features Type: Machine guard Expandable Caliper mounting: front side FAQ How is the VGC-4550F mounted to existing machines? The VGC-4550F is designed for attachment to machine frames or fixtures using conventional fasteners; exact mounting hardware depends on the machine and chosen mounting method. Can the guard accommodate calipers and other measuring tools? Yes, the design supports front-facing caliper mounting so measurement devices can be fitted without obstructing the protective function. Is the system suitable for retrofit projects in confined spaces? The expandable, modular layout of the guard makes it well suited to retrofits and tight workshop environments where phased installation is required. What are the main handling characteristics to consider during installation? With a compact footprint and a weight of 0.7 kg, the unit is easy to position and adjust, reducing installation time and manual effort. Who manufactures the machine guard? The guard is manufactured by Vertex Machinery Works Co., Ltd.; the VGC-4550F is part of their range of machine protection solutions. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of durable rubber, an expandable design and a compact footprint for consistent machine protection and flexible integration. Order the accessory directly via Metav Werkzeuge or contact our consultants for tailored advice. VGC-4585B Machine Guard by Vertex — Expandable Rubber Protection, 450 x 850 mm The VGC-4585B Machine Guard is an expandable rubber protection element designed to shield machine openings and sensitive components in workshop and production environments. *Expandable protection for varied machine sizes Durable rubber construction resists wear Compact footprint 450 x 850 mm Lightweight: 1.1 kg for easy handling Robust protection with adaptable fit The VGC-4585B combines rubber resilience with an expandable design to provide reliable protection where fixed guards cannot adapt. The elastomeric material absorbs impacts and limits ingress of chips and coolant, reducing downtime caused by contamination. For production lines that change over frequently, the adaptable geometry preserves machine accessibility while maintaining a protected barrier, supporting uninterrupted workflows and consistent part quality. Simple handling and fast shop-floor integration With a compact footprint (450 x 850 mm) and a lightweight construction at 1.1 kg, the guard is straightforward to position and reconfigure across different machines. The slim profile saves space on machine perimeters and facilitates access for maintenance operations. Compatibility for caliper placement on the rear side is provided, enabling organised tool placement without compromising protection. These attributes reduce installation time and simplify process adjustments on the shop floor. Built for precision environments and long service life Engineered for industrial use, the guard’s durable rubber resists routine wear and supports low-maintenance operation. In precision workshops and small-batch manufacturing, reliable protection helps to preserve sensitive components and measuring instruments, contributing to consistent measurement results and fewer service interventions. As part of the Vertex product range, the unit aligns with expectations for robust, purpose-designed accessories that help maintain efficiency and reduce unexpected stoppages. Order the Vertex VGC-4585B through Metav Werkzeuge for reliable, expandable machine protection — Metav Werkzeuge in Emmerich acts as a quality filter for the European market and can be contacted for product advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: VGC-4585B GTIN: 4061905091087 Manufacturer: Vertex Facts Dimensions: 450x850mm Weight: 1.1 kg Special features Material: Rubber Expandable design Suitable for caliper on rear side eClass: 24322502 FAQ Is this guard suitable for changing machine sizes? The VGC-4585B features an expandable design that adapts to varied machine openings, making it suitable where different configurations are used. What material is used and how does it affect durability? Constructed from rubber, the guard offers impact absorption and wear resistance; the material selection supports long service life in workshop conditions. Can the guard be mounted where measuring tools are stored? Yes — the design allows for caliper placement on the rear side while maintaining protective coverage around the machine opening. Will the guard interfere with regular maintenance access? The compact footprint and lightweight build allow quick repositioning, enabling maintenance access without extensive removal procedures. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of compact design, reliable magnetic clamping and a predictable 30 kg load rating to secure small assemblies with confidence. Order the magnetic threaded rod directly via Metav Werkzeuge or ask our consultants if needed. Threaded Rod with Magnet VSJM-85 — Magnetic clamping stud, 45 mm diameter by Vertex The Threaded Rod with Magnet VSJM-85 is a compact magnetic clamping accessory designed for precise workholding and temporary fixturing in busy workshops and production jigs. Magnetic clamping function 45 mm diameter for compact set-ups 30 Kg maximum load capacity Robust 0.7 kg construction Strong magnetic clamping for reliable temporary fixturing The magnetic base provides consistent holding force for short-term fixturing and positioning tasks, reducing the need for complex clamps. With a compact diameter of 45 mm, the component is suited to confined set-ups where space is at a premium. The magnetic holding action enables quick placement and repositioning of the stud, improving process speed and reducing downtime while maintaining secure contact with ferrous surfaces. Predictable load capacity and compact dimensions for stable set-ups Engineered for controlled performance, the stud delivers a rated 30 kg maximum load within its geometric limits. At a height of 87 mm and a mass of 0.7 kg, the element combines low weight with vertical stability, which is beneficial for modular assembly stations and inspection benches where excessive mass can disturb balance. These dimensions support repeatable clamping behaviour and make it straightforward to calculate safe working envelopes for delicate operations. Simple integration into workshop workflows and toolsets The threaded design allows straightforward incorporation into existing fixtures and jigs, enabling rapid retrofitting of magnetic fixation where required. As a Vertex component, the stud fits typical industrial workflows and can be used as a temporary anchor or alignment aid during set-up, measurement and light assembly tasks. For specialised applications or further technical specifications, Metav Werkzeuge can provide guidance and supplementary documentation to ensure the element meets the intended process requirements. Contact Metav Werkzeuge in Emmerich to discuss the VSJM-85 magnetic threaded rod and its suitability for specific fixtures; reach out by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for tailored advice and local supply information Technical data Article number: VSJM-85 GTIN: 4061905087233 Manufacturer: Vertex Key measurements Diameter: 45 mm Height: 87 mm Weight: 0.7 kg Maximum load: 30 Kg eClass: 23110301 Features Magnetic clamping function Threaded stud design Compact form factor for space-limited set-ups Suitable for temporary fixturing and positioning FAQ What is the maximum load the stud can hold? The rated maximum load is 30 kg for the VSJM-85 threaded rod with magnet; actual holding performance depends on the contact surface and installation. Can the magnetic rod be integrated into existing fixtures? Yes. The threaded design of the VSJM-85 permits integration into standard jigs and modular fixturing systems where a compact magnetic anchor is required. What are the main dimensions to consider when planning an installation? Key dimensions are the 45 mm diameter and 87 mm height, with a mass of 0.7 kg; these values help determine clearance and centre-of-gravity considerations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of magnetic retention, robust 45 mm diameter and compact height for secure, space-saving fixturing in mechanical workshops; order the threaded rod directly via Metav Werkzeuge or consult the team for application advice. Threaded Rod with Magnet (VSJM-110) – Ø45 mm, 30 kg capacity by Vertex A Threaded Rod with Magnet designed for reliable temporary fixturing and holding tasks in workshops and light industrial settings. Magnetic retention for quick fixture Diameter 45 mm for heavy-duty applications Max load 30 kg for secure holding Compact height 116 mm for tight spaces Dependable magnetic holding that speeds setup The magnetic retention of this threaded connector reduces setup time by eliminating the need for clamps in many repeatable tasks. The integrated magnet provides consistent holding force while the substantial 45 mm diameter gives mechanical stability under load, translating into fewer interruptions in production. This behaviour supports efficient workflows in assembly, inspection and temporary mounting operations where repeatability and speed are prioritised. The design also helps to align components accurately prior to final fastening. Compact, robust geometry for constrained workspaces A height of 116 mm combined with a total mass of 0.8 kg produces a compact component that fits into confined fixturing arrangements without sacrificing stability. The combination of modest mass and solid form factor makes this rod suitable for benches, jigs and mobile fixtures where space is limited; the geometry ensures that the centre of gravity remains favourable when carrying loads up to 30 kg. Clear, measurable specifications simplify integration into CAD layouts or pick-lists for workshop planning. Practical benefits for everyday workshop use With an emphasis on predictable performance, the magnetic threaded connector supports safer handling and faster changeovers. The product’s measurable characteristics—diameter, height and rated load—allow planners to evaluate suitability without guesswork. Where non-magnetic fixturing would require additional hardware, the integrated magnet reduces the parts count and makes the solution more compact. For those unfamiliar with magnetic fixtures, the principle is straightforward: magnetic attraction provides temporary holding while the threaded profile offers mechanical engagement when required. Contact Metav Werkzeuge for tailored advice on applying the Vertex threaded rod in specific fixtures or to discuss compatibility with existing jigs and tooling Technical data Article number: VSJM-110 GTIN: 4061905089282 Manufacturer: Vertex Facts Diameter: 45 mm Height: 116 mm Weight: 0.8 kg Max load: 30 kg Special features Integrated magnet Category: Vertex SKU: VSJM-110 FAQ Is the magnetic threaded rod suitable for permanent fastening? The threaded rod with magnet (VSJM-110) is intended for temporary fixturing and holding; permanent fastening should use standard threaded fasteners or locking hardware as appropriate. What load can be expected in horizontal use? The VSJM-110 is specified for a maximum load of 30 kg; actual usable load in a given orientation depends on contact area and surface condition. Can the magnet damage sensitive parts during fixturing? The integrated magnet provides holding force. For delicate or magnetically sensitive parts, additional protective measures or non-magnetic fixtures should be considered when using the VSJM-110. Is the product compatible with jig and fixture systems? The compact dimensions and substantial diameter make the threaded rod compatible with many bench and jig systems; measurements provided (45 mm Ø, 116 mm height) support straightforward integration. What distinguishes this Vertex component from plain threaded rods? The key difference is the integrated magnet, which offers quick temporary retention and reduces the need for additional clamping hardware when using the VSJM-110 in assembly or inspection setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high precision, robust cast-iron stability and compact dimensions for dependable setup and measurement tasks on the shop floor. Order the part directly via Metav Werkzeuge or consult the team for application advice. V-4V Prism Block — 0.05 mm accuracy, fine-grain cast iron (Vertex) A V-4V prism block engineered for secure workpiece support and precise inspection in workshop and metrology tasks High-precision 0.05 mm tolerance Made from fine-grain cast iron Compact dimensions 45×100×67 mm Reliable support for accurate measurement results The V-4V prism block delivers consistent precision with a rated accuracy of 0.05 mm, which reduces uncertainty during layout, inspection and marking tasks. This level of tolerance means the block is suitable for comparative checks and fixture set-up where repeatability is essential. In practice, a defined numeric accuracy indicates the expected maximum deviation under normal use; operators benefit from fewer secondary checks and a lower risk of scrap, improving workflow efficiency. Stable clamping, reduced vibration and easy handling Constructed from fine-grain cast iron, the prism block offers intrinsic damping characteristics that stabilise workpieces during measurement and light machining set-ups. The unit’s mass of 2.5 kg provides a firm base without being cumbersome, while the 45×100×67 mm footprint keeps the block compact on crowded benches. The V-profile secures cylindrical parts reliably, making it practical for repetitive tasks and multi-step inspection sequences where positional stability translates directly into better measurement confidence. Built for longevity and straightforward use on the shop floor The robust material choice and solid machining make the prism block resistant to everyday wear, maintaining its critical surfaces over time and reducing the need for frequent replacement. The geometry is straightforward to clean and position, supporting fast changeovers and predictable results in routine quality checks. Supplied by a recognised manufacturer, this V-block combines traditional manufacturing materials with precise tolerances to meet standard workshop demands while supporting professional metrology processes. For reliable workholding and precise inspection tasks, request the Vertex V-4V prism block through Metav Werkzeuge — local stock and expert advice available from Emmerich for quick, dependable delivery and application guidance. Technical Data Article number: V-4V GTIN: 4061905088162 eClass: 21160304 Facts Dimensions: 45×100×67 mm Weight: 2.5 kg Accuracy: 0.05 mm Special features Material: fine-grain cast iron Manufacturer: Vertex Product type: prism block (V-block) FAQ What tolerance can be expected from this prism block? The V-4V prism block is specified with an accuracy of 0.05 mm, suitable for reliable comparative measurements and setup tasks. Which material is used for the block and what does that mean in practice? The block is made from fine-grain cast iron; this provides good vibration damping and stable support for workpieces during inspection and light set-up operations. Is the V-4V suitable for bench-top metrology and workshop use? Yes, the V-4V prism block is designed for workshop and inspection bench applications where compact size and stability are required. How large is the footprint and what weight should be expected? The dimensions are 45×100×67 mm and the weight is 2.5 kg, offering a compact yet solid base for clamping cylindrical parts. Who manufactures this prism block? The prism block is produced by Vertex and supplied under the SKU V-4V for consistent quality and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of secure mounting, a compact 45 x 45 mm clamping interface and a lightweight build ensures steady positioning of lighting without occupying valuable bench space — order the accessory directly via Metav Werkzeuge or consult the team for tailored advice. V-21 table clamp 45 x 45 mm — accessory for LED lamps by Vertex V-21 is a precision table clamp designed to secure lighting fixtures to benches and 45 x 45 mm profiles for stable illumination in workshop environments. Secure clamp for 45 x 45 mm profiles Compact footprint for tight workspaces Lightweight at 0.48 kg Compatible with LED lamp mounts Consistent, vibration-free lighting for precise tasks A table clamp that provides secure mounting brings immediate benefits to tasks that depend on steady light. Designed for use with LED lamps, this clamp holds fixtures firmly to worktops and standard 45 x 45 mm profiles, reducing unwanted movement and the need for repeated readjustment. The result is more consistent illumination during inspection, assembly or fine assembly work, which supports higher process reliability and fewer interruptions to workflow. Keeps the workstation clear and easy to adapt The compact footprint of the clamp preserves bench space while allowing flexible placement of lighting where it is most effective. At lightweight (0.48 kg) the accessory is simple to handle and relocate between jobs without strain, helping workshops adapt quickly to changing tasks. This space-saving solution contributes to an efficient layout by keeping the work area accessible and well lit without bulky mounts or permanent fixtures. Engineered compatibility and dependable supply Manufactured by Vertex, the clamp is intended as a straightforward accessory for lighting systems used in industry and craft shops. Its interface to 45 x 45 mm profiles ensures compatibility with common framing and support systems, simplifying integration into existing setups. Procurement via a trusted partner supports continuity: reliable delivery and consistent product quality help keep production schedules on track and reduce the risk of downtime. Contact Metav Werkzeuge for personalised procurement advice on the V-21 clamp or to arrange purchase — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: V-21 GTIN: 4061905091827 Brand: Vertex Facts Profile size: 45 x 45 mm Weight: 0.48 kg Product type: Table clamp Special features Suitable for LED lamps mounting SKU: V-21 Category: Vertex accessories FAQ Is the clamp suitable for standard 45 x 45 mm profiles? Yes. The V-21 table clamp is designed specifically for attachment to 45 x 45 mm profiles and compatible framing systems. Can the clamp be used with LED lamps? The accessory is intended for mounting LED lamps and similar lighting fixtures to benches and profiles. What is the weight of the clamp? The clamp weighs 0.48 kg, making it easy to handle and reposition as needed. Who manufactures the clamp and how is it identified? The clamp is manufactured by Vertex and is listed under article number V-21 (GTIN 4061905091827). Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from 45° chamfering and variable speed up to 12,000 r.p.m. to remove burrs efficiently and achieve consistent edge quality; the compact 330×330×300 mm footprint and sturdy 40 kg construction ensure stable, repeatable operation. Order the VCF-300A directly via Metav Werkzeuge or request advice from their consultants for seamless integration. VCF-300A Chamfering and Deburring Machine — 0–12,000 r.p.m., 45° chamfer (Vertex) The VCF-300A Chamfering and Deburring Machine is a dedicated unit for precise 45° chamfering and deburring of most workpieces, designed for workshop and light production use. Variable speed 0–12,000 r.p.m. Fixed 45° chamfer angle Works on most materials except hardened Compact footprint 330×330×300 mm High-speed, consistent chamfering for reduced rework The VCF-300A delivers a variable speed range of 0–12,000 r.p.m., enabling process optimisation for different materials and burr sizes. Higher spindle speeds reduce cutting forces on thin sections and smooth finishes on softer alloys, while lower speeds permit controlled material removal on tougher workpieces. The fixed 45° chamfer setting eliminates angle adjustment errors and supports repeatable results across batches. For production environments this translates into fewer reworks and a shorter cycle time per part, helping to maintain throughput without sacrificing edge quality. Versatile handling across materials and geometries Designed to process most materials except hardened steels, this unit accommodates a wide range of workshop tasks from aluminium and brass to various plastics. The ability to manage both regular and irregular shapes reduces clamping complexity: irregular contours often require only minor fixturing changes rather than a full tool change or bespoke fixtures. The chamfering and deburring operations are explained simply as the removal of sharp edges and the creation of a defined bevel for assembly or safety—functions that lower downstream finishing costs and improve component fit. Compact footprint with stable operation and simple installation With overall dimensions of 330×330×300 mm and a mass of 40 kg, the machine combines a small footprint with enough mass for vibration damping during cutting. The unit runs from a single-phase 220 V supply (50/60 Hz), which simplifies electrics in most small workshops and avoids three-phase conversions in many installations. The moderate weight supports benchtop placement with straightforward anchoring; the reduced spatial demand aids flexible workshop layout and fast changeover between jobs. Proven brand and dependable supply chain Supplied by Vertex, the machine benefits from established manufacturing standards and clear spare-parts traceability. Sourcing through Metav Werkzeuge adds the advantage of a European distribution hub and quality-filtered logistics, which helps to maintain parts availability and consistent delivery. Confidence in the supply chain reduces project risk and supports planning for recurring production demands. Contact Metav Werkzeuge in Emmerich for tailored advice on the VCF-300A, specification checks and delivery options — email info@metav-werkzeuge.com or call +49 2822 7131930 for direct assistance Technical data Article number: VCF-300A GTIN: 4061905090639 ECLASS: 36639025 Dimensions: 330x330x300 mm Weight: 40 kg Core specifications Speed: 0–12000 r.p.m. Chamfer angle: 45° Supply voltage: 1Ø, 220V; 50Hz/60Hz Special features Suitable for almost all materials (except hardened) Works with regular and irregular shapes Manufacturer: Vertex FAQ What range of spindle speeds does the unit offer? The VCF-300A provides a variable spindle speed from 0 to 12,000 r.p.m., allowing adaptation to different materials and burr conditions. Can the machine produce other chamfer angles besides 45°? The VCF-300A is configured for a defined 45° chamfer angle to ensure repeatability; alternative angle requirements should be discussed with Metav Werkzeuge for possible custom solutions. Is the VCF-300A suitable for use on plastics and soft metals? Yes, the VCF-300A is suitable for most materials including plastics and soft metals; hardened steels are excluded from the specified material suitability. How large is the machine and what workspace does it require? The unit measures 330×330×300 mm and weighs 40 kg, offering a compact footprint that fits standard workshop benches with minimal space requirement. Who manufactures the VCF-300A and how is supply handled? The machine is manufactured by Vertex and distributed via Metav Werkzeuge for European supply and logistics. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of portable hand-operated use, a fixed 45° chamfer and the supplied indexable inserts for efficient chamfering and deburring of large, hard-to-move components. Order the VCF-600 bevel and deburring machine directly via Metav Werkzeuge or ask our consultants if needed. VCF-600 bevel and deburring machine by Vertex — hand-operated, 45° chamfer, 12,000 rpm The VCF-600 bevel and deburring machine is a compact, hand-operated chamfering tool designed for fast edge preparation and deburring of large workpieces that are difficult to move, providing consistent 45° chamfers. Hand-operated for portable use High-speed 12,000 rpm spindle Fixed 45° chamfer angle Includes SPMW and ZSPMW indexable inserts Fast, precise chamfering even when parts cannot be moved The VCF-600 delivers a consistent 45° chamfer at high speed, engineered to save handling time on heavy or fixed components. Its 12,000 rpm spindle allows rapid material removal while maintaining a controlled finish, so production cycles become shorter and rework is reduced. For shops transitioning from manual filing to mechanised edge preparation, this tool provides measurable throughput gains and a reliable surface quality that translates into lower downstream processing costs. Portable design that reduces handling and set-up time Weighing just 3.7 kg and configured for hand operation, this chamfering machine is optimised for mobility on the shop floor. The lightweight construction and compact footprint (380 x 130 mm) make it straightforward to manoeuvre around welded assemblies, large plates or mounted fixtures, cutting the need to unmount workpieces. The combination of portability and a robust housing ensures sustained performance in everyday industrial use. Flexible power options for international workshops Equipped for multiple supply configurations, the unit supports single-phase 110 V/220 V and three-phase 220 V / 380 V / 415 V at 50/60 Hz, enabling deployment in varied electrical environments without extensive rework. Clear specification of the supply modes reduces installation uncertainty and speeds commissioning on international sites, making the machine suitable for global shops and mobile service engineers who require adaptable tooling. Ready to work: indexable inserts and practical maintenance Delivered with SPMW 090304 and ZSPMW 090308 indexable inserts, the tool is ready for immediate use on a wide range of ferrous and non-ferrous edges. Indexable inserts simplify maintenance and lower running costs by allowing quick corner changes instead of full-tool replacement; operators benefit from minimal downtime and predictable consumable management. Basic maintenance consists of insert checks and routine lubrication, tasks that are straightforward even in small workshops. Contact Metav Werkzeuge for personalised technical advice and purchasing information on the Vertex VCF-600 — available from our Emmerich quality hub via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VCF-600 GTIN: 4061905090295 Manufacturer: Vertex Core technical data Dimensions: 380 x 130 mm Speed: 12,000 rpm Weight: 3.7 kg Chamfer angle: 45° Supply voltage: 3-phase 220 V; single-phase 110 V/220 V; 3-phase 380 V/415 V (50/60 Hz) Special features Hand-operated execution Suitable for large workpieces that are difficult to move Includes indexable inserts: SPMW 090304 and ZSPMW 090308 FAQ What materials can be processed with this chamfering machine? The Vertex VCF-600 bevel and deburring machine is suitable for common workshop metals and typical workpiece materials used in chamfering; the supplied indexable inserts cover a broad range of standard applications. Is the machine suitable for on-site or mobile use? Yes. The VCF-600 is a hand-operated, portable unit with a compact footprint and a weight of 3.7 kg, designed for use directly at the workpiece when moving the part is impractical. How are the inserts replaced and which types are included? The machine is supplied with SPMW 090304 and ZSPMW 090308 indexable inserts; replacement consists of straightforward insert changes, reducing downtime compared with brazed or solid-tool regrinds. Which electrical supplies are supported for international deployment? The VCF-600 supports multiple supply configurations: single-phase 110 V/220 V and three-phase 220 V or 380 V/415 V at 50/60 Hz, allowing flexible installation across different workshop standards. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Efficient finishing and reliable deburring are delivered by the combination of a 3,500 r.p.m. spindle and the supplied grinding wheel, producing repeatable 45° chamfers on both soft and hard materials; the compact footprint and flexible power options support fast integration into existing workflows. Order the VCF-500S directly via Metav Werkzeuge or ask our consultants if needed. VCF-500S Chamfering and Deburring Machine — 45° chamfering, 3,500 r.p.m. (Vertex) The VCF-500S is a compact chamfering and deburring machine designed to deliver controlled edge finishing and consistent 45° bevels for a wide range of workshop applications Compact finish machine, 45° chamfer angle 3,500 r.p.m. operating speed for consistent results Supplied with Ø165×Ø22 mm grinding wheel Flexible power options: single or three-phase Consistent 45° chamfers for mixed materials The combination of a high-speed spindle and a purpose-driven grinding wheel results in reliable edge quality across different substrates. Operating at 3,500 r.p.m., the unit achieves a uniform material removal rate that reduces rework and shortens cycle times; this is particularly beneficial when parts require repeatable, machinist-grade chamfers. The integrated grinding disc, matched to the machine’s angular setting, simplifies setup and ensures the same finish is obtained from the first piece to the last. Workplace-friendly size and electrical flexibility With a compact footprint of 330×410 mm and a transport weight of 26 kg, the machine is designed to sit comfortably on a bench or within a small production cell without compromising accessibility. Multiple supply configurations — including single-phase and three-phase options — enable straightforward electrical integration in varied shop environments, reducing installation time and avoiding long downtimes for rewiring. The compact design supports efficient floor space use while maintaining robust finishing performance. Consumables, maintenance and operational clarity The machine is supplied with a Ø165×Ø22 mm grinding wheel, which can be replaced with standard abrasive discs for different surface requirements. The straightforward mounting and clear angular reference for 45° chamfering make consumable changes and operator training quick to carry out, lowering lifetime operating costs. Routine checks focus on wheel condition and spindle integrity, keeping maintenance intervals short and predictable and preserving consistent edge geometry across production runs. Choose Vertex precision for dependable finishing — contact Metav Werkzeuge in Emmerich for tailored advice or to secure the VCF-500S from our local stock. Technical data Article number: VCF-500S GTIN: 4061905089107 Included accessory: Grinding wheel Ø165×Ø22 mm Facts Dimensions: 330×410 mm Weight: 26 kg Speed: 3,500 r.p.m. Chamfer angle: 45° Power supply: 3Ø 220V or 1Ø 110V/220V 50Hz/60Hz and 3Ø 380V/415V Special features Suitable for soft and hard materials Supplied with grinding wheel Compact bench-mount design Consistent chamfering and deburring function FAQ What materials can be processed with this chamfering and deburring machine? The VCF-500S from Vertex is suitable for both soft and hard materials, delivering consistent deburring and 45° chamfers across common workshop substrates. Is the supplied grinding wheel compatible with standard abrasives? Yes, the included Ø165×Ø22 mm grinding wheel fits standard abrasive discs, allowing the Vertex VCF-500S to be adapted for different surface finishes and material hardnesses. Which power configurations are available for installation? The Vertex VCF-500S supports multiple supply options, including single-phase operation at 110V/220V and three-phase operation at 220V, 380V or 415V, making it suitable for varied electrical setups. How does the machine improve workflow in a small production environment? By combining a compact footprint with a 3,500 r.p.m. spindle and reliable wheel mounting, the VCF-500S reduces bench space needs and shortens setup times, improving throughput and consistency. What maintenance is required to retain chamfer accuracy? Routine inspection of the grinding wheel and spindle is recommended; maintaining correct wheel condition on the Vertex VCF-500S preserves the nominal 45° chamfer accuracy and prolongs component life. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a compact, workshop-friendly storage solution that brings organised accessory management and a stable presence to the bench. With its space-saving dimensions and sturdy build, the cabinet helps streamline grinding operations and reduce time spent searching for consumables. Order the VTC-20 via Metav Werkzeuge or consult our team for tailored advice. VTC-20 Accessory Cabinet for Universal Knife Grinder — Compact, space-efficient The VTC-20 is an accessory cabinet designed for organising tools and consumables used with universal knife grinders, offering a compact footprint for small workshops and production benches. Compact footprint: 460 × 370 × 860 mm Robust presence, total weight 30.25 kg Designed for universal knife grinders Organised storage for grinder accessories Save floor space while keeping essentials at hand A deliberately compact footprint provides efficient storage without sacrificing accessibility. The cabinet’s dimensions of 460 × 370 × 860 mm mean it fits neatly beside a bench or machine, turning unused vertical space into a practical organisation zone. By centralising accessories and consumables, the cabinet reduces search times and supports a more consistent workflow, which is particularly valuable in busy workshop environments where every minute counts. Stable presence that supports daily workshop use Weighing 30.25 kg, the unit offers a stable base that resists accidental movement during routine operations. This mass contributes to a reliable, fixed storage solution that keeps consumables and tooling organised and ready for use. The design focus is on practical durability and steady performance, helping maintenance routines remain straightforward and lowering the likelihood of downtime caused by misplaced items. Improve process flow and reduce interruptions Designed specifically as an accessory cabinet for universal knife grinders, the VTC-20 enhances the immediate availability of essential accessories and spares. Clear organisation minimizes interruption between grinding operations and setup changes, enabling teams to maintain consistent throughput. The integration of a dedicated storage unit supports safer handling of small parts and consumables, fostering a tidier, more professional workshop environment. Speak with Metav Werkzeuge in Emmerich to discuss how the Vertex VTC-20 accessory cabinet can optimise workshop layout and accessory management — email info@metav-werkzeuge.com or call +49 2822 7131930 to request further details or personalised advice Technical data Article number: VTC-20 GTIN: 4061905095115 Brand: Vertex Category: Vertex Type: Cabinet Description: Accessory for universal knife grinders Facts Weight: 30.25 kg Dimensions: 460 × 370 × 860 mm Special features Accessory for universal knife grinders Compact footprint for bench-side placement Organised storage for grinder accessories FAQ What are the exact dimensions and will the cabinet fit beside a bench grinder? The VTC-20 measures 460 × 370 × 860 mm and is designed for bench-side placement, offering a compact footprint suited to most workshop layouts. Is the cabinet suitable specifically for universal knife grinders? Yes, this accessory cabinet is intended for use with universal knife grinders and provides organised storage for related consumables and accessories. How heavy is the unit and does the weight affect stability? The cabinet weighs 30.25 kg; this weight contributes to a stable, steady presence that helps prevent accidental movement during daily workshop use. Does the VTC-20 include internal fittings for particular tools? The accessory cabinet is configured to store grinder accessories and consumables; configurations and internal layout are optimised for organised handling of such items. Can the cabinet be integrated into an existing workshop layout? The compact dimensions and cabinet form factor allow straightforward integration beside benches and machines, improving accessibility to accessories and supporting workflow efficiency. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of compact dimensions, a set of four clamping elements and a low overall weight for reliable table clamping — order the set directly via Metav Werkzeuge or consult our specialists for integration advice. CK-3720 T-slot clamping jaws — Compact 28×45×35 mm set by Vertex The CK-3720 T-slot clamping jaws are a compact set of four clamping elements designed for secure workholding in standard machine table T-slots. Compact 28×45×35 mm size Delivered as set of 4 pieces Total weight 1.1 kg for the set SKU CK-3720, GTIN 4061905087899 Secure clamping that supports efficient machining A stable clamping arrangement reduces rework and keeps cycle times predictable. The set of four clamping jaws provides a consistent interface between the workpiece and the machine table, supporting reliable force transmission and repeatable positioning. With the T-slot layout and the compact footprint, the elements are suitable for close-packed setups where space is limited, helping to maintain throughput without compromising on hold-down performance. Compact design for flexible fixturing Small external dimensions allow the clamping jaws to be positioned close to the workpiece edge, enabling machining operations that require minimal obstruction. The 28×45×35 mm profile minimises interference in multi-clamp configurations and supports flexible fixturing strategies on smaller tables or fixtures. The relatively low set mass of 1.1 kg contributes to easier handling during setup and reduces the inertial load on delicate assemblies. Faster set‑up and greater process consistency Using a matched set streamlines alignment and reduces the trial-and-error typically associated with ad hoc clamping. The uniform geometry across the four pieces improves repeatability between jobs and shortens downtime for changeovers. Where consistent clamping force and position repeatability are required, this solution supports a more predictable production flow and fewer interruptions for repositioning. Reliable supply and pragmatic partnership Sourcing components from established manufacturers removes uncertainty from the procurement chain. Metav Werkzeuge acts as a quality filter for the European market, combining a broad product range with dependable logistics from Emmerich. This close supply relationship reduces the administrative burden on procurement while ensuring access to standardised clamping elements for workshop and industrial use. Contact Metav Werkzeuge for tailored advice on integrating the CK-3720 set into existing fixturing systems — reach our team via info@metav-werkzeuge.com or call +49 2822 7131930 for detailed technical guidance and prompt delivery from Emmerich Technical data Article number: CK-3720 GTIN: 4061905087899 Set: 4 pieces Core data Dimensions: 28×45×35 mm Weight: 1.1 kg Special features T-slot clamping elements Delivered as a matched set Brand: Vertex FAQ How many pieces are included in the set? The delivery comprises four clamping jaws supplied as a matched set. What are the external dimensions of the clamping elements? Each element measures 28×45×35 mm as provided in the product specification. What is the product identification for ordering? Order using SKU CK-3720 or GTIN 4061905087899 for accurate fulfilment. Are these components intended for T-slot workholding? Yes, the elements are designed for use in T-slot workholding systems and are supplied as a set for consistent clamping arrangements. How heavy is the complete set? The total set weight is 1.1 kg according to the product data Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a combination of precision and robust construction to keep setup and inspection tasks running smoothly: the angle plate VR-44 delivers 0.01 mm accuracy and a high-strength cast steel body for long-term stability. Order the angle plate VR-44 directly via Metav Werkzeuge or ask our consultants if needed. Angle plate VR-44 by Vertex — high-strength cast steel, 0.01 mm precision Angle plate VR-44 is a compact clamping and reference solution for machining, inspection and layout tasks where repeatable right-angle alignment is essential Precision 0.01 mm accuracy High-strength cast steel construction Compact 4 x 4 x 4 in footprint Stable 2.5 kg mass for damping Accurate reference for precise setups and inspections The VR-44 functions as a reliable right-angle reference, engineered to deliver repeatable alignment in production and quality-control environments. The combination of a high-strength cast steel body and a tightly controlled manufacturing process yields accuracy of 0.01 mm, which reduces adjustment time at the machine table and improves first-pass yield. For operators unfamiliar with technical tolerances, this level of precision ensures parts are located consistently, cutting rework and inspection effort. Robust build that reduces vibration and wear A dense construction with a mass of 2.5 kg provides effective damping of minor vibrations during clamping and handling, stabilising setups and maintaining contact integrity between workpiece and reference face. The cast steel material offers superior rigidity compared with lighter alternatives, extending service intervals and preserving dimensional stability under repeated loading. This durability translates into lower lifetime maintenance and a more predictable production cadence. Space-conscious footprint with wide application range With external dimensions of 4 x 4 x 4 in (L x W x H) the unit occupies minimal bench or machine-table area while providing full-size reference surfaces for a broad range of components. The compact geometry supports flexible fixturing arrangements in tight workspaces and on inspection stands, enabling efficient part orientation without sacrificing accessibility. Where process reliability is paramount, a compact reference that does not compromise on precision streamlines workflow and facilitates quicker changeovers. Practical advantages for workshop and quality departments Supplied by an established manufacturer, the product is suitable for both setup and inspection tasks in toolrooms, jobshops and production cells. The combination of dimensional accuracy, material strength and practical mass improves measuring repeatability and reduces the need for compensating fixtures. For audit-sensitive environments, the dependable reference faces help standardise measurement routines, supporting traceable results and consistent part quality. Contact Metav Werkzeuge in Emmerich to discuss VR-44 compatibility with existing fixturing and to arrange supply directly from our European quality filter; email info@metav-werkzeuge.com or call +49 2822 7131930 to request customised advice Technical data Article number: VR-44 GTIN: 4061905089039 Material: high-strength cast steel Accuracy: 0.01 mm Dimensions: 4 x 4 x 4 in (L x W x H) Weight: 2.5 kg Manufacturer: Vertex Facts Accuracy: 0.01 mm Weight: 2.5 kg Dimensions: 4 x 4 x 4 in Special features Cast steel construction Right-angle reference faces Compact footprint for limited space applications Stable mass for vibration damping FAQ What accuracy can be expected from the angle plate VR-44? The angle plate VR-44 is manufactured to an accuracy of 0.01 mm, providing reliable repeatability for setup and inspection tasks. Is the VR-44 suitable for use on a machine table as a fixture? Yes, the robust cast steel construction and stable mass make the VR-44 suitable as a reference fixture on machine tables and inspection benches. How large is the footprint of the VR-44? The external dimensions are 4 x 4 x 4 in, offering a compact footprint that fits constrained workspaces while providing full-size reference faces. Can the VR-44 improve measuring consistency in a quality-control process? Using the VR-44 as a standard right-angle reference improves part orientation and repeatability, supporting more consistent measurement outcomes in quality procedures. Who manufactures the VR-44 and where is it made? The unit is supplied by Vertex and conforms to the manufacturer’s specifications for precision workshop equipment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking advantage of a compact profile and dual-thread compatibility, the part delivers flexible clamping options and straightforward integration into existing T-slot fixtures; order direct from Metav Werkzeuge or consult their specialists for application advice. Vertex T-slot nut 3424I – dual-thread T-slot fastener for versatile clamping Vertex T-slot nut 3424I is a robust T-slot fastener designed for secure fixing in machine tables and fixture systems; suitable where mixed-thread accessories and compact dimensions are required Dual thread sizes for broad compatibility Compact 1x1-1/8x5/8" profile Lightweight at 0.06 kg for easy handling Single-piece design for straightforward mounting Versatile clamping across mixed-thread systems The T-slot nut provides a pragmatic solution when workshop flexibility is required: its dual-thread option supports multiple stud standards, reducing the need to stock separate fasteners and simplifying tool-up. In everyday practice this means fewer changeovers on the shop floor and faster set-up times. The robust fastening principle of a T-slot fastener ensures reliable lateral restraint in slotted profiles, while the clear thread specifications allow planners to match bolts or studs with confidence. Where interchangeability and swift reconfiguration are priorities, this fastener offers a measured improvement in operational efficiency. Compact dimensions that aid exact positioning With a compact footprint of 1 x 1-1/8 x 5/8" and a nominal slot engagement of 5/8", the component supports precise placement without consuming excessive profile space. The small weight (0.06 kg) contributes to easy handling during assembly and repositioning, which is particularly helpful when multiple fixtures are adjusted repeatedly. The dimensional data enable engineers to calculate clamping loads and spacing accurately; when combined with compatible studs and clamping elements, the result is a predictable and stable hold that aids machining accuracy and repeatability. Simple inventory logic and quick installation Delivered as a single-piece item, this T-slot fastener reduces inventory complexity and eliminates assembly steps associated with multi-component anchors. The straightforward geometry supports efficient installation with common workshop tools and shortens fixture build times. Because the design focuses on compatibility and usability rather than decorative or non-essential features, procurement teams benefit from a lean inventory strategy and technicians benefit from predictable, repeatable behaviour on the machine table. For production environments that prioritise uptime and quick tool changes, this fastener supports a pragmatic workflow with minimal fuss. For flexible clamping solutions, contact Metav Werkzeuge GmbH about the Vertex T-slot nut 3424I — expert advice and local stock guidance are available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 3424I GTIN: 4061905093357 Name: T-slot nut Brand: Vertex Weight: 0.06 kg Dimensions: 1x1-1/8x5/8" T-slot width: 5/8" Thread sizes: 1/2-12" and 1/12-13" Item: single Technical drawing and product images available FAQ What thread sizes are provided with this fastener? The fastener is supplied with two thread specifications listed as 1/2-12" and 1/12-13", allowing selection between different thread standards when fitting studs or bolts to the Vertex T-slot nut 3424I. Is the component suitable for repeated repositioning in T-slot tables? Yes, the T-slot nut is designed for regular repositioning; its compact dimensions and single-piece form help maintain consistent clamping behaviour during repeated fixture changes. Can the fastener be used with metric studs? The listed thread sizes are imperial; adaptation to metric studs requires appropriate adapters or matching bolts. The Vertex T-slot nut 3424I is intended to be used with compatible imperial-threaded hardware. Does the product include installation guidance or drawings? A technical drawing and product images are available to support correct selection and integration of the fastener into fixtures and machine tables. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable 45° edge preparation and consistent surface finish result from the 3,500 r.p.m. spindle and the included SEKN 1203 indexable insert; benefit from precise chamfering and low downtime—order directly via Metav Werkzeuge or consult our specialists for installation and voltage configuration. VCF-500F Chamfering and Deburring Machine — 45° Chamfer, 3,500 r.p.m. (Vertex) The VCF-500F is a chamfering and deburring machine engineered for precise 45° edge preparation, delivering uniform surface quality for both deburring and subsequent drilling tasks in workshops and light production environments. 45° chamfer angle for consistent edge preparation 3,500 r.p.m. spindle speed for efficient processing Includes SEKN 1203 indexable milling insert Flexible supply voltage options for varied installations High-performance edge finishing that reduces rework The VCF-500F combines a 45° chamfer with a high-speed spindle running at 3,500 r.p.m. to produce repeatable, clean edges that reduce manual rework and downstream correction. The controlled cutting geometry and stable spindle speed enable predictable material removal, which supports efficient cycle times on repetitive tasks. Emphasis on process reliability makes this chamfering unit suitable for small-series production and workshop tasks where consistent edge quality is required. Compact footprint and flexible electrical connection for easy integration With compact nominal dimensions of 500 x 220 mm and a mass of 29 kg, the unit is straightforward to position on a benchtop or integration frame. Electrical compatibility is broad: available for 1Ø 110V/220V (50/60 Hz) and 3Ø 220V / 380V / 415V systems, permitting installation where either single-phase or three-phase supplies are present. This flexibility minimises additional site work and simplifies commissioning in diverse industrial environments. Ready-to-use tooling and maintenance benefits The machine is delivered with an SEKN 1203 indexable milling insert, providing immediate cutting capability and a predictable wear profile. Indexable inserts reduce downtime compared with solid tooling because corners can be indexed rather than replaced entirely. Routine maintenance is simplified by the insert system and the accessible toolholder arrangement, so operational availability is maximised and consumable changes remain quick and safe. Consistent surface quality for combined deburring and drilling workflows A key advantage of this chamfering and deburring solution is the same surface quality achieved for both deburring and drilling operations. Producing a uniform finish at the edge improves hole preparation and supports subsequent machining steps. The machine’s function is therefore well suited to workflows where edge condition directly affects hole quality or assembly fit, helping to secure consistent outcomes across batches. For precise 45° edge preparation with Vertex reliability, contact Metav Werkzeuge for tailored advice on installation and supply options—email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the VCF-500F and integration requirements Technical Data Article number: VCF-500F GTIN: 4061905090172 eClass: 36639025 Manufacturer: Vertex Facts Dimensions: 500 x 220 mm Spindle speed: 3,500 r.p.m. Weight: 29 kg Chamfer angle: 45° Supply voltage: 1Ø 110V/220V 50Hz/60Hz; 3Ø 220V; 3Ø 380V/415V Special features Includes SEKN 1203 indexable milling insert Same surface quality for deburring and drilling Chamfering and deburring function suitable for workshop and light production FAQ What electrical connections are supported by the machine? The VCF-500F supports multiple supply options; it is configurable for 1Ø 110V/220V (50/60 Hz) and 3Ø 220V / 380V / 415V, allowing installation in sites with single-phase or three-phase power. Is a cutting tool included with delivery? Yes, delivery includes an SEKN 1203 indexable milling insert, providing immediate cutting capability and straightforward insert replacement. What chamfer angle does the unit produce? The machine produces a 45° chamfer, optimised for consistent edge preparation and improved compatibility with subsequent drilling operations. How large is the footprint and how heavy is the unit? Nominal dimensions are 500 x 220 mm, with a weight of 29 kg, making the unit compact enough for benchtop use or simple integration into existing workstations. Can this machine improve drilling results after deburring? Yes, the VCF-500F is designed to deliver the same surface quality for deburring and drilling, which supports better hole preparation and reduces the need for secondary finishing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Built for accurate edge finishing, the VCF-500 pairs replaceable carbide inserts with a high-speed spindle to deliver fast, consistent chamfering and deburring — ideal for busy workshops. Order the Vertex VCF-500 via Metav Werkzeuge or consult Metav’s specialists for tailored delivery and technical advice. VCF-500 — Vertex chamfering and deburring machine, 3,500 r.p.m. The VCF-500 is a compact chamfering and deburring machine designed for workshop and light-production environments, delivering repeatable edge preparation with minimal setup time Replaceable carbide inserts for long life 3,500 r.p.m. spindle speed for fast processing Compact footprint: 500 x 320 mm Incl. side indexable milling plate SPUN 422 Rapid, consistent edge preparation to speed workflows The machine’s combination of a high-speed spindle and replaceable carbide inserts delivers a reliable process for edge finishing. With a rated speed of 3,500 r.p.m., the unit reduces cycle times while maintaining a consistent finish across batches. This translates into measurable productivity gains on repeated chamfering tasks, helping to optimise throughput without complex adjustments. Operators with limited metrology experience benefit from predictable results and fewer reworks. Small footprint, robust build for workshop environments With a compact footprint of 500 x 320 mm and a net mass of 28.5 kg, the machine fits neatly onto standard workbenches or production islands. The relatively low weight supports flexible placement and straightforward integration into existing workflows, while the robust construction ensures vibration damping for steady results. These characteristics support efficient shop-floor layout and make the unit suitable for both manual and semi-automated production cells. Practical accessories and flexible power supply for diverse shops The VCF-500 includes a side indexable milling plate SPUN 422, enabling immediate use for common deburring and chamfering tasks. Multiple supply options — single‑phase and three‑phase voltages — provide installation flexibility: 3Ø 220V or 1Ø 110V/220V 50Hz/60Hz and 3Ø 380V/415V. This adaptability simplifies integration into different electrical environments and reduces downtime during commissioning, while the accessory package supports fast changeovers between operations. Wide applicability while keeping operation straightforward Designed primarily for edge finishing tasks such as chamfering and deburring, the unit delivers a balanced mix of speed and control that suits maintenance shops, toolrooms and small batch production. Maintenance focuses on periodic insert changes rather than complex overhauls, keeping lifecycle costs predictable. Clear mechanical adjustments and visible tooling choices reduce setup errors and help maintain consistent part quality across runs. For reliable, high‑throughput chamfering select the Vertex VCF-500 and contact Metav Werkzeuge for personalised delivery and technical guidance from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VCF-500 GTIN: 4061905083129 Designation: Anfas- und Entgratmaschine Core specifications Dimensions: 500 x 320 mm Weight: 28.5 kg Spindle speed: 3,500 r.p.m. Features and accessories Replaceable carbide inserts Incl. side indexable milling plate SPUN 422 Supply voltages: 3Ø 220V; 1Ø 110V/220V 50Hz/60Hz; 3Ø 380V/415V Brand: Vertex FAQ How fast does the machine operate? The VCF-500 runs at a spindle speed of 3,500 r.p.m., offering a balance between surface finish and processing speed for chamfering and deburring tasks. What tooling is included with the unit? The delivery includes a side indexable milling plate SPUN 422 and the machine uses replaceable carbide inserts for ongoing serviceability. Is the VCF-500 easy to integrate into different power systems? Yes. The VCF-500 accepts multiple supply options: 3Ø 220V, 1Ø 110V/220V (50Hz/60Hz) and 3Ø 380V/415V, allowing straightforward installation in varied electrical environments. Which applications suit this machine best? The unit is intended for workshop-level chamfering and deburring, making it suitable for maintenance departments, toolrooms and small-batch production where reliable edge finishing is required. How often should carbide inserts be changed? Insert life depends on material and usage intensity; however, the VCF-500’s design with replaceable carbide inserts simplifies replacement, keeping corrective downtime to a minimum. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact yet powerful solution that combines consistent edge quality, a 3,500 r.p.m. spindle and flexible electrical options for seamless integration into production. Order the machine directly via Metav Werkzeuge or consult our advisors for specification support and delivery from Emmerich. VCF-500R Bevelling and Deburring Machine — 3,500 r.p.m., 1 HP (Vertex) A robust VCF-500R bevelling and deburring machine engineered for efficient processing of R double-angle components in workshop and light-production settings 3,500 r.p.m spindle speed for efficient bevelling Compact footprint 500×400×320 mm for tight shops Flexible supply 1 HP, 110–220 V or 220–400 V options Designed for R double-angle deburring and chamfering Consistent edge quality for repeatable production The machine delivers precise bevelling and deburring by maintaining a stable spindle speed at 3,500 r.p.m., which reduces variation between workpieces and shortens secondary finishing operations. For fabricators and small production lines, this translates into fewer rework cycles and more predictable output. The built-in capacity to process R double-angle profiles ensures consistent chamfer geometry, supporting quality control and repeatability across batches. Space-saving design that simplifies workflow With a compact footprint of 500 × 400 × 320 mm and a net weight of 28 kg, the unit integrates into constrained workbenches or mobile setups without extensive rearrangement. The reduced floor space requirement supports leaner workshop layouts and easier access to adjacent machinery. The relatively low mass allows relocation within the shop when production needs change, helping to optimise material flow and minimise handling time. Electrical flexibility and robust drive for varied installations Equipped with a 1 HP standard drive and configurable supply options — 110–220 V single-phase or 220–400 V three-phase at 50/60 Hz — the machine adapts to differing electrical infrastructures commonly found in trade and industrial environments. This compatibility reduces installation complexity and supports deployment at multiple sites without major electrical modifications. The reliable drive assembly is designed for continuous operation, contributing to steady cycle times. Practical operation that reduces processing steps The system focuses on practicality: its task-specific construction for chamfering and deburring of R-profile edges cuts processing steps by combining two functions in one compact unit. Operators benefit from straightforward setup and predictable results, while production planners gain from simpler process chains and lower downstream finishing requirements. The device’s specification suits workshops seeking measurable efficiency gains with limited floor space. Contact Metav Werkzeuge today for an individual specification and fast delivery from Emmerich — our consultants assist with compatibility checks and order processing for Vertex machines Technical data SKU: VCF-500R GTIN: 4061905083136 ECLASS: 36639025 Type: Bevelling and deburring machine for R double-angle Core specifications Dimensions: 500 × 400 × 320 mm Spindle speed: 3,500 r.p.m. Net weight: 28 kg Power: 1 HP (standard) Supply voltage: 110–220 V (single-phase) / 220–400 V (three-phase) Frequency: 50/60 Hz Features & suitability Brand: Vertex Application: Chamfering and deburring of R double-angle parts Ideal for workshops and light-production environments Compact, mobile-capable design FAQ What materials can be processed with this bevelling and deburring machine? The VCF-500R by Vertex is designed for general metal deburring and chamfering tasks; suitability depends on the chosen tooling and process parameters for specific alloys. Is the machine compatible with single-phase power supplies? Yes, the unit supports single-phase operation at 110–220 V as well as three-phase 220–400 V, allowing flexible installation in different electrical environments. How large is the machine and can it fit on a standard workbench? The compact footprint of 500 × 400 × 320 mm and a weight of 28 kg mean the device fits comfortably on standard benches and in constrained workshop layouts. What spindle speed does the machine use for bevelling operations? The machine operates at a spindle speed of 3,500 r.p.m., providing steady performance for consistent chamfering and deburring results. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan