Ausstattungen für Fräsmaschinen

Durable, waterproof illumination with wide voltage compatibility and a compact 520 mm profile ensures reliable machine-side lighting for continuous production environments; benefit from proven Vertex quality and straightforward integration. Order the LED machine lamp directly via Metav Werkzeuge or ask our consultants if needed. VLED-W18 LED machine lamp — IP67 waterproof, 100–240 V input, Vertex The LED machine lamp provides robust, waterproof illumination for machine tools and workshop workstations, engineered for industrial environments where steady, glare-minimised light is required IP67 protection for wet environments Wide input range 100–240 V for global use Compact 520 mm length for focused illumination Robust build at 2.5 kg for industrial durability Consistent, high‑performance illumination for machining A reliable light source is essential for accuracy and safe operation at the machine. The VLED-W18 delivers stable LED output with an input range of 100–240 V, which removes the need for special transformers and supports use across varied supply conditions. The IP67 rating indicates dust-tight construction and protection against temporary immersion, so illumination remains unaffected by coolant spray or workshop washdowns. This combination of electrical compatibility and enclosure protection reduces downtime caused by failed lighting and contributes to a predictable production flow through long service intervals and fewer replacements. Easy integration and functional design for the workshop The lamp’s 520 mm length provides a concentrated lighting band suitable for tool zones and inspection areas without overwhelming adjacent workspaces. At 2.5 kg, the assembly is substantial enough to remain stable on common mounting arrangements yet remains manageable during installation or repositioning. The unit is specified for use with a 12 W lamp module, ensuring efficient energy use while maintaining adequate luminous output for close-up tasks. These characteristics mean the fitting can be specified confidently in retrofit projects or included in new machine layouts where consistent task lighting improves measurement reliability and operator comfort. Built for industrial reliability and procurement confidence Vertex has designed this machine light for repetitive production environments where robustness matters. The sealed construction and industrial-grade electronics aim to prolong operational life and reduce maintenance cycles. For purchasing departments and workshop managers, the lamp’s compatibility with standard voltages and its durable ingress protection simplify logistics and spare‑part planning. Metav Werkzeuge acts as a quality filter for the European market, offering access to Vertex products with transparent logistics and technical advisory support, which helps to de‑risk procurement and ensure that the chosen lighting meets on‑site requirements. For tailored advice on integrating the Vertex VLED‑W18 into production equipment or to confirm specification details, contact Metav Werkzeuge for consultancy and delivery from our Emmerich hub Technical data Article number: VLED-W18 GTIN: 4061905005688 Manufacturer: Vertex Machinery Works Co., Ltd. Core specifications IP rating: IP67 Input voltage: 100–240 V Length: 520 mm Weight: 2.5 kg Special features Waterproof construction Compatible with 12 W lamp module Designed for industrial machine illumination FAQ What does IP67 mean for use at the machine? IP67 means the lamp is dust-tight and protected against temporary immersion in water, so the VLED‑W18 remains operational in environments exposed to coolant spray and regular cleaning. Is the lamp compatible with different supply voltages? Yes, the VLED‑W18 supports an input range of 100–240 V, allowing installation across varied mains standards without additional conversion equipment. Can the VLED‑W18 be used for inspection and measurement tasks? The focused 520 mm length and consistent LED output make the lamp suitable for close‑range inspection and machine‑side measurement illumination. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

A robust solution for reliable tool retention: the 545 mm length combined with a standard 5/8-11UNF thread delivers consistent engagement and straightforward compatibility with NT40 holders, while a compact 1 kg mass keeps handling efficient. Order the VDR-NT40I-S drawbar directly via Metav Werkzeuge or ask our consultants if needed. VDR-NT40I-S drawbar – 545 mm, 5/8-11UNF (Vertex) A precision drawbar designed to secure NT40 tool holders in CNC spindles, offering standard-thread retention and straightforward installation for workshop use 545 mm overall length 5/8-11UNF threaded connection Compatible with NT40 tool holders Robust 1 kg construction Consistent clamping for predictable machining results The VDR-NT40I-S drawbar provides a mechanically simple yet effective method of retaining tool holders in a spindle, translating into stable axial retention during machining. By using a standard 5/8-11UNF thread, the component interfaces with widely used retention knobs and clamping systems, reducing the need for bespoke adapters. This compatibility supports a streamlined workflow and reduces machine downtime because replacement or interchange is rapid and unambiguous. The overall length of 545 mm ensures sufficient engagement depth for many NT40 configurations, while the modest weight of 1 kg aids safe handling during tool changes without compromising robustness. Standard interfaces and practical workshop benefits Designed for practical integration into existing setups, the drawbar’s NT40 alignment and standard thread make it suitable for many common CNC toolholding environments. The reliance on established interfaces simplifies inventory management and spares provisioning, which is especially relevant for production settings that value repeatability and quick turnarounds. Fewer special parts mean fewer procurement steps and lower logistical complexity. The straightforward mechanical design also reduces maintenance demands; inspections focus on thread condition and straightness, which are easy to monitor without specialised equipment. Built for everyday use with an emphasis on reliability Constructed for routine workshop handling, the component prioritises durability and dependable performance over unnecessary complexity. The combination of a compact mass and a long engagement length balances ease of handling with secure clamping, supporting consistent tool repeatability across shifts. Supplied by the Vertex line, the part benefits from manufacturer recognition in machining accessories, helping to ensure consistent quality control. For procurement and integration, the clear technical specification minimises guesswork and supports concise documentation in maintenance schedules and parts lists. Contact Metav Werkzeuge in Emmerich for tailored advice and to order the VDR-NT40I-S drawbar; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VDR-NT40I-S GTIN: 4061905094118 Brand: Vertex Facts Length: 545 mm Thread: 5/8-11UNF Weight: 1 kg Special features Compatible with NT40 tool holders Image asset available: VDR-R8-S-main.png FAQ What machines is this drawbar compatible with? The VDR-NT40I-S drawbar is designed for spindle systems and tool holders using the NT40 interface and a 5/8-11UNF retention thread. Is the thread standard compatible with common retention knobs? Yes, the 5/8-11UNF thread on the VDR-NT40I-S matches widely used retention knob standards for secure clamping. How does the 545 mm length affect use? The 545 mm overall length provides sufficient engagement depth for many NT40 setups, supporting stable axial retention without excessive overhang. What should be checked during routine maintenance? Inspect the thread condition and straightness of the drawbar; these elements are critical for consistent clamping performance with the VDR-NT40I-S. Can this drawbar be handled safely during tool changes? With a weight of approximately 1 kg, the drawbar is compact enough for safe manual handling while still providing the mass needed for dependable retention. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable clamping through the M16x2P thread and a 545 mm length delivers consistent tool retention and reduced setup variation; combine precision and robust construction for dependable production. Order the drawbar directly via Metav Werkzeuge or consult our advisors for specification support. VDR-NT40M-S Drawbar – M16x2P thread, 545 mm (Vertex) VDR-NT40M-S is a high-precision drawbar for NT40 toolholding systems, engineered for stable clamping in machining centres. Precision M16x2P thread for secure clamping 545 mm overall length for extended reach Robust 1.0 kg construction for stability Compatible with NT40 spindle interfaces Reliable clamping for uninterrupted production A precise M16x2P thread and a consistent length of 545 mm reduce axial play and help maintain spindle balance during machining. The design focuses on repeatability: by providing a firm mechanical connection between spindle and toolholder, the component lowers the risk of tool loosening and unplanned stops. This results in predictable cycle times and fewer retouches, supporting smoother workflows on the shop floor. The combination of precision and mass contributes to stable cutting conditions and extended tool life. How the specification improves machining results The threaded connection used here is a standard in many NT40 systems and transmits the clamping force that keeps the toolholder seated. A drawbar with consistent geometry minimises runout and vibration, which directly affects surface finish and tolerances. For less technical audiences: runout is the wobble of the tool relative to the spindle axis; lower runout means cleaner cuts and longer-lasting cutting edges. Selecting the correct thread form and length ensures that clamping force is applied evenly across the taper, improving both process reliability and part quality. Practical handling and workshop compatibility Installation is straightforward and compatible with standard NT40 toolholders and centralising systems. The moderate mass of 1.0 kg provides inertia that can dampen minor vibration while remaining easy to handle during tool changes. Regular inspection of the thread and seating faces—cleaning, light lubrication where recommended, and checking for wear—keeps performance consistent. Where high-precision results are required, combining the drawbar with proper spindle maintenance and tool balancing will yield the best outcomes for both routine and demanding machining tasks. Contact Metav Werkzeuge to confirm suitability for specific NT40 setups and to arrange supply from our Emmerich warehouse; our advisors will help match the right Vertex drawbar to production needs. Technical data SKU: VDR-NT40M-S GTIN: 4061905095177 Brand: Vertex Dimensions & core data Length: 545 mm Thread: M16x2P Weight: 1.0 kg Standards & identifiers eClass: 23309104 ETIM: EC001959 UID: VDR-NT40M-S FAQ What interface does this drawbar fit? The VDR-NT40M-S is intended for NT40 taper interfaces and uses an M16x2P thread to secure the toolholder. How long is the drawbar and why does length matter? The overall length is 545 mm; correct length ensures proper clamping engagement and consistent toolholder seating. What maintenance keeps the drawbar performing reliably? Regular cleaning of the thread and seating surfaces, inspection for wear, and light lubrication as appropriate preserve clamping precision for the VDR-NT40M-S. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable tool retention and straightforward integration are ensured by the combination of the M12 x 1.75 thread and the 555 mm length; the low mass contributes to faster spindle acceleration and reduced wear. Order the drawbar directly via Metav Werkzeuge or consult the Metav team for application advice and delivery options. VDR-NT30M-S drawbar by Vertex — M12 x 1.75 thread, 555 mm length The VDR-NT30M-S is a drawbar designed to provide secure axial clamping in machine tool toolholding systems, suited for workshops and production environments requiring reliable retention and quick spindle response. M12 x 1.75 thread for secure clamping 555 mm overall length for extended reach Lightweight construction at 0.6 kg for faster dynamics Consistent clamping for uninterrupted production A drawbar serves to pull and lock a tool holder into the spindle taper; the M12 x 1.75 thread of this component provides a standardised interface for retention systems. The precise thread pitch ensures consistent axial preload, which reduces micro-movement between spindle and tool holder during cutting. For production environments this translates into less tool run-out, improved repeatability and fewer rejects. The specification also supports predictable maintenance intervals, as thread condition and torque behaviour are easily checked during routine inspection. Fitment that reduces downtime and simplifies inspection The 555 mm length offers reach for deeper spindles or extended toolholder configurations while remaining compact enough for efficient handling. The geometry is optimised to allow rapid engagement and disengagement without complex adapters, supporting faster tool changes and shorter cycle times. Lightweight at 0.6 kg, the component contributes to lower inertial loads on the spindle, aiding acceleration and deceleration phases. Inspection procedures are straightforward: visual checks of the thread and measuring the overall length are usually sufficient to confirm usability, helping workshops maintain throughput with minimal disruption. Robustness and predictable workshop economics Constructed to industry standards and delivered under the Vertex designation, this drawbar emphasises reliable performance rather than unnecessary complexity. The specification favours components that are easy to replace and verify, supporting a pragmatic approach to spare-part management. By choosing a standardised retention element, toolholding systems benefit from simplified stocking and consistent behaviour across machine fleets. This predictability supports long-term planning and reduces hidden operating costs associated with unexpected tool clamping failures. Contact Metav Werkzeuge in Emmerich for application-specific advice and to arrange delivery of the Vertex VDR-NT30M-S drawbar; email info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance Technical data Article number: VDR-NT30M-S GTIN: 4061905092251 Manufacturer: Vertex Core specifications Length: 555 mm Thread: M12x1,75P Weight: 0.6 kg eClass: 23309104 Design details SKU / UID: VDR-NT30M-S Brand: Vertex Image asset available FAQ What is the primary function of this drawbar? The VDR-NT30M-S drawbar is used to pull and secure a tool holder into the spindle taper, providing axial clamping for machining operations. Which thread specification does the component use and why does it matter? The component uses an M12 x 1.75 thread; this standardised pitch ensures reliable torque transfer and repeatable axial preload for consistent tool retention. Is the length suitable for deep spindle setups? The 555 mm overall length provides extended reach for deeper spindles or toolholder arrangements while maintaining manageable handling characteristics. How does the weight affect spindle performance? At approximately 0.6 kg, the drawbar contributes minimal additional inertia, aiding quicker spindle acceleration and deceleration, which can improve cycle times. Can the VDR-NT30M-S be inspected easily during routine maintenance? Yes, routine inspection typically involves checking the thread condition and measuring the overall length; the straightforward design supports quick verification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of secure thread retention, extended reach and low weight for reliable clamping and smoother setups; order the drawbar directly via Metav Werkzeuge or ask our consultants for compatibility advice. Drawbar VDR-NT302-S — 1/2-12UNF thread, 555 mm length (Vertex) A drawbar designed for secure retention in machining and clamping applications, featuring a 1/2-12UNF thread and industrial dimensions for versatile use. Secure 1/2-12UNF thread 555 mm length for extended reach Lightweight 0.6 kg for easy handling Vertex build and industrial SKU VDR-NT302-S Reliable retention for consistent machining results The 1/2-12UNF thread offers a dependable mechanical interface for retention systems, delivering secure clamping that reduces slippage under load. By relying on a standard fine thread, setups are simplified and spindle-to-tool engagement is stable, which supports repeatable machining cycles. This reliability translates into fewer interruptions and a steadier production flow for workshop environments that demand consistent results. Optimised length and weight for handling and reach With a length of 555 mm and a weight of 0.6 kg, the component provides a balanced combination of reach and manageability. The extended length allows access to deeper toolholders or specialised fixtures without compromising control during installation. The low mass reduces handling fatigue during frequent tool changes and helps maintain spindle balance, contributing to improved operational efficiency and reduced set-up times. Compatibility focus to minimise downtime Marked as VDR-NT302-S, the item is prepared for integration where a 1/2-12UNF retention connection is specified. The straightforward mechanical design supports rapid assessment of compatibility with existing toolholding systems, enabling quick replacement or upgrade decisions. For bespoke or unusual tool interfaces, technical consultation is available to confirm fitment and to recommend the best configuration for reduced downtime and sustained precision. Contact Metav Werkzeuge to secure the Vertex drawbar VDR-NT302-S for precise clamping — our team in Emmerich advises on compatibility and supply for your workshop needs Technical data Article number: VDR-NT302-S GTIN: 4061905091070 Brand: Vertex Facts Length: 555 mm Weight: 0.6 kg Thread: 1/2-12UNF Special features eClass: 23309104 Category: Vertex Asset ID: 63972fb8c806fb82109e34dc FAQ What thread does the drawbar use? The VDR-NT302-S uses a 1/2-12UNF thread for retention and secure mounting. What are the dimensions and weight of the product? The drawbar is 555 mm long and weighs 0.6 kg, suitable for extended-reach applications. Is this component compatible with standard toolholders? Compatibility depends on the holder thread; the VDR-NT302-S is intended for systems accepting a 1/2-12UNF retention fitting. Can this item support high-precision setups? Yes, the 1/2-12UNF retention and industrial dimensions make the VDR-NT302-S appropriate for accurate clamping in routine precision work. Which SKU and GTIN identify this item? SKU: VDR-NT302-S GTIN: 4061905091070 Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a combination of precise thread compatibility and a compact overall length for dependable tool retention and stable machining. Benefit from clear identification via the SKU and GTIN and order directly through Metav Werkzeuge or consult our specialists for compatibility checks. Draw bar VDR-NT303-A — 1/2-13UNF thread, 555 mm, Vertex A draw bar VDR-NT303-A designed to secure tooling in conventional machining and toolholding assemblies, offering a standard 1/2-13UNF interface for common spindle fittings 1/2-13UNF thread interface 555 mm overall length 0.9 kg compact mass SKU VDR-NT303-A for quick identification Enhanced process reliability through secure clamping The primary advantage of a correctly specified draw bar lies in consistent retention force and repeatable tool positioning. With its 1/2-13UNF thread and fixed 555 mm length, this component reduces variation at the spindle interface and supports steady machining cycles. Clear specification of the thread type simplifies compatibility checks for machine tool engineers and reduces downtime caused by misfitted components. The standardised thread also enables easier procurement and spares management within a production environment. Balanced mass for handling and vibration control A compact mass of 0.9 kg contributes to manageable handling during tool changes while helping to damp minor vibrations that can amplify at higher spindle speeds. The relatively low weight assists maintenance technicians during frequent interventions and aids in maintaining concentricity when the assembly is clamped. Where runout and surface finish are critical, the inertia characteristics of the fastening element matter; a consistent mass supports predictable machine behaviour without compromising rigidity in the toolholding stack. Practical guidance on installation and compatibility Installation requires matching the 1/2-13UNF thread to the machine’s retention mechanism and verifying the overall 555 mm length suits the toolholder and spindle geometry. For straightforward integration, check the SKU VDR-NT303-A and the GTIN when comparing components to legacy assemblies. Routine inspection should focus on thread condition and straightness; any deformation may affect clamping force. Where uncertainty exists about fitment or interchangeability, reference the machine manufacturer’s spindle specifications or consult technical documentation to confirm tolerances before commissioning. For assured compatibility and fast supply, order the Vertex draw bar via Metav Werkzeuge or contact our technical consultants at info@metav-werkzeuge.com / +49 2822 7131930 for a quick specification check Technical data SKU: VDR-NT303-A GTIN: 4061905092343 Manufacturer: Vertex Dimensions & weight Length: 555 mm Weight: 0.9 kg Thread: 1/2-13UNF Classification & assets ECLASS: 23309104 Category: Vertex Image filename: VDR-R8-S-main.png FAQ What thread does this draw bar use and which spindles is it compatible with? The draw bar uses a 1/2-13UNF thread; compatibility depends on the spindle retention thread standard—confirm that the spindle accepts 1/2-13UNF threads before installation. How long is the draw bar and why does length matter? The overall length is 555 mm; length affects the toolholder engagement and must match the machine’s tool clamping geometry to ensure correct seating and axial position. What is the identification code for ordering and inventory purposes? Order and stock using the SKU VDR-NT303-A; the GTIN 4061905092343 provides an additional global identifier for logistics and procurement. How should the draw bar be inspected during routine maintenance? Inspect thread integrity and straightness; any galling or distortion of the 1/2-13UNF thread or axial bending warrants replacement to maintain clamping reliability. Which manufacturer produces this draw bar? The item is produced by Vertex and labelled under the SKU VDR-NT303-A, enabling traceability to the original toolmaker. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise, low-profile height adjustment and a compact, lightweight design to streamline setup and support of light machinery; order the unit directly via Metav Werkzeuge or consult our specialists for application advice. VSJ-250 screw jack — Vertex adjustable height 140–230 mm, 30 kg capacity The VSJ-250 screw jack delivers height-adjustable support for light machinery, fixtures and workshop assemblies, combining compact dimensions with reliable mechanical adjustment. Height-adjustable 140–230 mm range 30 kg maximum load capacity 55 mm base diameter for stable support Lightweight 2.3 kg for easy handling Consistent positioning and measurable performance The VSJ-250 offers a clear, quantifiable benefit for workshop operations: a defined adjustable height 140–230 mm delivering repeatable setup without complicated ancillary equipment. With a rated 30 kg maximum load and a stable 55 mm base diameter, the unit provides dependable vertical support for light machines, jigs and temporary fixtures. The screw mechanism converts minimal rotary input into controlled axial motion, enabling accurate height changes and fine adjustment during alignment procedures. This measurable behaviour reduces setup time and supports consistent production quality. Compact support that improves workflow efficiency Designed for straightforward handling, the lifting device weighs 2.3 kg, which makes repositioning and storage notably easier compared with heavier supports. The compact footprint frees bench and trolley space while maintaining stabilising contact with workpieces. Low moving mass contributes to faster manual adjustments and reduces operator fatigue during repeated tasks. As a result, workflow becomes more efficient and changeovers proceed with less downtime — a practical advantage in environments where flexibility and speed matter. Clear identification and procurement readiness Specification and procurement are simplified by unambiguous identifiers and industry classification: SKU: VSJ-250 and GTIN: 4061905093425 provide precise ordering and inventory traceability, while the ECLASS code facilitates integration into material lists. The technical drawing and detail images included with the product support planning and help verify installation clearances before purchase. These elements assist purchasing teams and maintenance planners in matching the lifting support to the exact application requirements without guesswork. Discuss application options with Metav Werkzeuge for reliable supply of Vertex lifting supports and tailored advice from our Emmerich-based quality team Technical data SKU: VSJ-250 GTIN: 4061905093425 ECLASS: 21044290 Dimensions & capacity Diameter: 55 mm Adjustable height: 140–230 mm Maximum load: 30 kg Weight: 2.3 kg Features & extras Height adjustment by screw mechanism Compact workshop support Technical drawing and detail images available FAQ What is the maximum load the VSJ-250 can support? The VSJ-250 has a maximum load capacity of 30 kg as specified for light machinery and fixture support. How is the height adjusted on the lifting support? Height is adjusted via the integrated screw mechanism, providing a stepless range from 140–230 mm for fine positioning. What footprint does the support require? The support has a base diameter of 55 mm and is designed for a compact footprint suitable for benches and trolleys. Is the unit easy to move and reposition within the workshop? Yes, with a weight of 2.3 kg the unit is lightweight and intended for straightforward handling and relocation. Which identifiers should be used when ordering replacement units? Use SKU: VSJ-250 and GTIN: 4061905093425 to ensure correct ordering and inventory tracking. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable inspection lighting with a dust‑protected lamp head, IP67 protection and a flexible single‑joint arm delivers precise illumination for inspection and workshop tasks. Supplied with a 1.8 m cable and supporting multi‑voltage operation, the unit adapts to varied installations. Order the VHL-300S halogen lamp directly via Metav Werkzeuge or ask our consultants if needed VHL-300S halogen inspection lamp — dust‑protected head, single‑joint arm (Vertex) The VHL-300S is a dust‑protected halogen inspection lamp designed for workshop and inspection stations, featuring a single‑joint adjustable arm and a robust, IP‑rated lamp head suitable for precise visual inspection work. IP67-rated lamp head Single-joint adjustable arm Multi-voltage operation 24–380 V Includes 1.8 m connection cable Precise, consistent illumination for inspection tasks The lamp provides steady, contrast‑rich light thanks to its halogen source and compatibility with a 55 W bulb, which together ensure reliable colour rendering and shadow control for visual inspection and assembly work. This consistent light output supports accurate measurement and defect detection on components, reducing the need for repeated checks. The combination of focused illumination and a compact head makes the unit suitable for workbenches and measuring stations where clear, uncoloured light improves judgment and process reliability. Built to withstand demanding workshop conditions The lamp head is IP67 rated while the arm carries an IP20 classification, giving a clear separation of protection levels between the light module and the support structure. IP67 indicates a dust‑tight head with high resistance to ingress, making the fitting more resilient in dusty production areas; the arm’s IP20 rating reflects standard mechanical protection suitable for indoor workshop environments. At 2.3 kg, the assembly provides stable positioning without excessive bulk, helping to maintain alignment during inspection cycles while remaining manageable for repositioning. Flexible installation and practical connectivity Equipped for multi‑voltage supply (110 / 220 / 380 / 24 V as required) and delivered with a 1.8 m cable, the unit adapts to varied electrical setups without extensive rewiring, simplifying integration into existing workstations. The single‑joint arm enables rapid repositioning and secure local adjustment, providing ergonomic access to the illuminated area. These practical attributes reduce downtime and support a dependable lighting arrangement across different production cells and measuring benches, delivering immediate operational benefits for workshop teams For tailored procurement and technical advice from Metav Werkzeuge — including voltage configuration and delivery from our Emmerich warehouse — contact our sales consultants to secure Vertex inspection lighting suited to specific inspection workflows Technical Data SKU: VHL-300S GTIN: 4061905089084 Product type: Halogen inspection lamp Dust protection: yes Facts Weight: 2.3 kg Nominal bulb: 55 W Voltage options: 110 / 220 / 380 / 24 V Cable length: 1.8 m Arm joints: 1 Special features Lamp head IP67, arm IP20 Single-joint adjustable arm Multi-voltage compatibility Includes 1.8 m connection cable Dust-protected design FAQ What environments is this lamp suitable for? The VHL-300S halogen inspection lamp is intended for workshop and inspection stations; the IP67 lamp head provides strong dust protection while the arm is designed for indoor workshop use. What does an IP67 lamp head mean in practice? IP67 indicates the lamp head is dust‑tight and highly protected against temporary immersion; in the VHL-300S this enhances durability where assemblies are exposed to dust or splashing. Which voltages are supported by the lamp? The unit supports multiple supply options — 110 / 220 / 380 / 24 V — allowing adaptation to various electrical installations without complex conversion. Is a bulb and cable included with the lamp? The VHL-300S is specified for a 55 W halogen bulb and is supplied with a 1.8 m cable, simplifying immediate installation. How easy is the lamp to position during inspection work? The single‑joint arm allows quick, stable repositioning of the lamp head for focused illumination during inspection and assembly tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a combination of 7/16-20UNF thread, 598 mm length and a lightweight build of 0.8 kg to ensure dependable retention and consistent tool seating in R8 spindles. Order the VDR-R8-A directly via Metav Werkzeuge or consult the product specialists for application advice. VDR-R8-A Drawbar for R8 spindles — 7/16-20UNF, 598 mm The VDR-R8-A is a drawbar intended for R8 tool retention applications, engineered to provide repeatable clamping and reliable tool seating in machining spindles. R8-compatible drawbar with 7/16-20UNF thread 598 mm length for deep engagement Lightweight construction at 0.8 kg SKU VDR-R8-A, GTIN 4061905091339 Consistent retention for precision machining A reliable retention element is essential for repeatable machining results. The drawbar uses a standard 7/16-20UNF connection, facilitating compatibility with spindles and retention systems that accept this UNF thread. The 598 mm overall length provides extended engagement, which helps maintain concentricity and reduces axial play during cutting cycles. With a mass of 0.8 kg, the component offers a balance between sufficient inertia for stable seating and manageable handling during setup. These characteristics contribute directly to reduced set-up variation and improved process stability, which in turn supports predictable part quality and lower scrap rates. Installation and compatibility with R8 toolholders Thread conformity and correct engagement depth are decisive for safe operation. The specified 7/16-20UNF thread is a common standard for retention components and ensures straightforward mechanical connection where R8 interfaces are specified. The extended length is designed to accommodate deeper toolholder geometries, enabling secure clamping without excessive protrusion. Installation should follow the machine tool or toolholder manufacturer's instructions for torque and inspection intervals to preserve the integrity of the spindle interface. Routine checks for thread condition and axial wear are recommended to sustain secure clamping and repeatable performance. Supply reliability and partner advantages Sourcing precision components through a focused distributor reduces procurement risk and shortens lead times. Metav Werkzeuge acts as a quality filter for the European market, combining broad availability with specialist advice; this supports efficient replenishment and process continuity on the shop floor. The association with Vertex underlines original-equipment provenance for the retention rod, while Metav’s experience and inventory breadth ensure transparent order handling from Emmerich to the workbench. Choosing this type of component supports operational reliability and a predictable supply chain for production environments that demand consistent toolholding. For precise R8 tool retention and supply assurance, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930; consultants are available to verify fitment and application details Technical Data Article number: VDR-R8-A GTIN: 4061905091339 Thumbnail: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b8/2f/97/63/63972fb8c806fb82109e34dc/VDR-R8-S-main.png Facts Length: 598 mm Weight: 0.8 kg Thread: 7/16-20UNF Special features Compatibility: R8 toolholder retention SKU: VDR-R8-A Category: Vertex FAQ What spindle interfaces is this drawbar compatible with? The VDR-R8-A drawbar is specified for R8 toolholder retention and uses a 7/16-20UNF thread that matches standard retention fittings for R8 spindles. Is the material specified for the VDR-R8-A? Material data is not provided for the VDR-R8-A; the available technical details list thread, length and weight for selection and fitment assessment. How does the 598 mm length influence performance? A 598 mm engagement length increases axial contact and helps maintain concentric seating in deeper toolholder configurations, improving repeatability during machining. Are torque values included for installation? No torque values are given for the VDR-R8-A; follow the machine tool or toolholder manufacturer's instructions for correct tightening and inspection routines. Can this drawbar be ordered via Metav Werkzeuge? Yes, the VDR-R8-A is available through Metav Werkzeuge; product specialists can confirm compatibility and delivery options. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the high‑strength cast steel construction and 0.01 mm accuracy to secure repeatable 90° fixturing; the solid 4.3 kg mass ensures thermal and mechanical stability during inspection and light machining. Order the VR‑55 Angle Plate directly via Metav Werkzeuge or consult our advisors for application support. VR‑55 Angle Plate — robust 90° clamping plate with 0.01 mm precision (Vertex) The VR‑55 Angle Plate is a compact precision clamping plate designed for stable 90° positioning in machining and inspection setups, optimised for workshop and metrology environments. High‑strength cast steel construction 0.01 mm calibration accuracy Compact 5 x 5 x 5" footprint Robust 4.3 kg mass for stability Consistent accuracy for measurement and machining The Angle Plate delivers 0.01 mm positional accuracy, providing a reliable datum for inspection and setup tasks. Built from high‑strength cast steel, the plate resists deformation and spreads loads evenly across its base, which reduces measurement variability and helps preserve spindle and gauge alignments. This combination of material and tolerance reduces rework and improves first‑pass yields, making it especially valuable where repeatable right‑angle fixturing is required. Stability and handling that simplify workflows A solid mass of 4.3 kg gives the fixturing base natural damping and resistance to movement during probing or light machining operations. The 5 x 5 x 5" footprint balances compactness with a stable contact area, so the plate fits easily on inspection tables, machine beds or inside fixtures while maintaining a low centre of gravity. The result is fewer clamp adjustments and faster setup times, supporting efficient workstation turnover without compromising on precision. Seamless integration into shop and metrology processes Designed as a clamping and fixturing component for workshop and inspection use, the plate mates with standard tooling and can be incorporated into modular setups. The robust construction from Vertex ensures long‑term dimensional stability, which supports calibration intervals and traceability within quality systems. The device is suitable for repetitive positioning tasks and serves as a dependable right‑angle reference in both production and quality assurance contexts. Contact Metav Werkzeuge today to discuss how the VR‑55 Angle Plate’s high‑strength cast steel construction and 0.01 mm accuracy can increase setup reliability at your workbench; our Emmerich‑based advisors will help specify the right fixtures for the application Technical data SKU: VR‑55 GTIN: 4061905089855 ECLASS: 21170130 Manufacturer: Vertex Core specifications Dimensions: 5 x 5 x 5" Material: high‑strength cast steel Accuracy: 0.01 mm Weight: 4.3 kg Features & applications 90° clamping and fixturing Stable mass for reduced vibration Suitable for inspection and light machining setups Compact footprint for versatile placement FAQ What tolerance can be expected from this angle plate? The VR‑55 Angle Plate is specified with a 0.01 mm accuracy, providing a precise right‑angle reference for inspection and setup tasks. What material is the plate made from? The plate is manufactured from high‑strength cast steel, chosen for dimensional stability and resistance to deformation during clamping and light machining. What are the physical dimensions and weight of the product? The unit measures 5 x 5 x 5" with a mass of 4.3 kg, offering a compact footprint combined with solid stability. Is the component suitable for metrology benches and machine beds? Yes — the VR‑55 Angle Plate is designed for secure 90° fixturing in both workshop and metrology environments, supporting repeatable measurement and positioning tasks. Which brand and SKU should be referenced when ordering? Order the VR‑55 Angle Plate from Vertex using SKU VR‑55 and GTIN 4061905089855 for clear identification. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precision clamping and a compact footprint to improve machining repeatability; the 6-inch opening combined with a robust 270 x 127 mm construction supports secure holding and stable cycles. Order the VCL-6C directly via Metav Werkzeuge or consult our specialists for application-specific guidance. VCL-6C collet — 6" opening, 270 x 127 mm, Vertex The VCL-6C is a precision collet engineered to provide secure workpiece clamping in machining and workshop environments. Collet VCL-6C by Vertex 6" clamping opening Dimensions 270 x 127 mm Weight 1.18 kg Consistent, high-precision clamping for efficient production A robust clamping sleeve delivers precision clamping and repeatable grip, reducing off-centre errors and rework in serial production. The 6-inch opening supports a broad range of workpiece diameters while maintaining concentricity under load, which translates into fewer rejected parts and more reliable cycle times. By focusing on mechanical stability rather than added electronics, this clamping solution provides predictable behaviour across shifts and operators, contributing to smoother throughput and lower overall process variation. Space-efficient design that speeds up handling and changeovers The compact footprint of 270 x 127 mm and a mass of 1.18 kg make the unit easy to position, remove and store between operations. Its modest bulk reduces inertia on the spindle, helping to preserve tool life and minimise vibration during high-speed work. The small envelope also allows integration into existing sets of tooling and fixtures without extensive reconfiguration, shortening changeover times and improving workshop ergonomics for quicker job set-ups. Industrial readiness and clear procurement data for fast integration Designed for workshop integration, the clamping device is identified under SKU VCL-6C and is traceable by GTIN and ECLASS codes for inventory and procurement systems. Technical traceability supports quality assurance and fast replacement planning while the simple mechanical concept eases maintenance intervals. If compatibility with a specific chuck or machine interface is uncertain, the product specification and delivery codes enable precise cross-referencing in procurement systems and technical drawings. Contact Metav Werkzeuge in Emmerich for tailored advice and procurement of Vertex clamping solutions such as the VCL-6C; our consultants ensure the best-fit solution for each workshop application Technical data Article number: VCL-6C GTIN: 4061905090783 Manufacturer: Vertex ECLASS: 21041712 Facts Dimensions: 270 x 127 mm Opening: 6" Jaw depth: 88.5 mm Weight: 1.18 kg Special features Collet type: clamping sleeve Application focus: precision clamping for machining Brand: Vertex FAQ What diameters can be clamped with this collet? The VCL-6C collet features a 6" opening suitable for a wide range of workpiece diameters; exact fit depends on the selected insert or jaw set for the clamping sleeve. Is the collet suitable for high-speed machining? The clamping design of the VCL-6C by Vertex provides stable holding under typical workshop spindle speeds; confirmation for specific high-speed applications can be provided by Metav Werkzeuge based on machine parameters. How heavy is the unit and can it be handled ergonomically? The unit weighs 1.18 kg, offering a balance of rigidity and manageable handling for routine changeovers and storage. Which procurement identifiers are available for ordering and stock control? Ordering and stock control can use SKU VCL-6C, GTIN 4061905090783 and ECLASS 21041712 for traceability. Can the VCL-6C be integrated into existing chuck systems? Integration is typically straightforward; the VCL-6C collet is designed for workshop compatibility and can be cross-referenced against machine interfaces using the SKU and technical data provided. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of reliable high pressure delivery and a generous 600 cc reservoir for efficient, regularly scheduled lubrication in workshop environments. Order the unit directly via Metav Werkzeuge or contact our consultants for application advice. LT-18 Hand-operated grease pump (lever) – 600 cc, 15 Kg/cm² (Vertex) The LT-18 hand-operated grease pump is a compact lubrication unit intended for workshop and maintenance use, providing controlled grease application to bearings and machine components via a lever mechanism. High-capacity 600 cc reservoir Lever-operated for precise lubrication control Delivers up to 15 Kg/cm² pressure Compact 100 x 110 mm, weight 1.6 kg Consistent lubrication for fewer interruptions The LT-18 combines a 600 cc reservoir with sustained delivery to reduce the frequency of topping up and help maintain continuous operation on production machinery. The larger reservoir limits downtime between maintenance cycles, while the measured output supports scheduled lubrication routines. For workshop managers seeking predictable maintenance intervals, the unit offers a straightforward route to more uniform machine care with minimal process disruption. Precise, repeatable application under high working pressure Equipped with a lever-operated actuation, the pump enables controlled dosing and reliable pressure generation up to 15 Kg/cm², which supports effective grease penetration into bearings and fittings. The mechanical actuation removes reliance on external power, making performance repeatable even in remote or temporary setups. The design translates technical capability into practical benefit: accurate lubrication reduces wear and contributes directly to extended component life. Compact, portable design for versatile shop use With compact dimensions of 100 x 110 mm and a total mass of 1.6 kg, the device is easy to position at point-of-need and simple to store between service intervals. The modest footprint allows placement on maintenance trolleys or near machine tool centres without consuming valuable bench space. Robust handling characteristics and straightforward operation make the unit suitable for routine workshop maintenance where mobility and quick access are priorities. For tailored advice on using the LT-18 in specific applications or to arrange supply through Metav Werkzeuge in Emmerich, please contact our consultants by email or telephone; Metav offers specialist procurement support and reliable logistics for workshop equipment. Technical data Article number: LT-18 GTIN: 4061905088551 eClass: 23069090 Designation: Hand grease pump Brand: Vertex Facts Capacity: 600 cc Pressure: 15 Kg/cm² Dimensions: 100 x 110 mm Weight: 1.6 kg Special features Lever-operated for manual dosing Compact, portable format for shop use Suitable for routine workshop lubrication FAQ What capacity does the pump have? The LT-18 pump provides a 600 cc reservoir, allowing extended operation between refills. Which maximum pressure can be generated? The unit generates up to 15 Kg/cm², enabling effective grease delivery for standard bearing and fitting lubrication. How is the pump operated? Operation is manual via a lever; the lever-controlled mechanism ensures repeatable dosing and does not require external power. Is the pump suitable for mobile workshop use? Yes, the pump’s compact dimensions and 1.6 kg weight make it suited for portable maintenance tasks across the workshop. Who manufactures the LT-18? The LT-18 is produced by Vertex and distributed via Metav Werkzeuge for European workshop supply chains. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of a 600 cc reservoir, 3.5 kg/cm² delivery pressure and a compact footprint ensures reliable, controlled lubrication with minimal refills; ideal for regular workshop maintenance. Order the EA-8R directly via Metav Werkzeuge or consult our specialists for application-specific advice. EA-8R Hand Lubricant Pump by Vertex — 600 cc reservoir & 3.5 kg/cm² delivery The EA-8R is a manual hand lubricant pump designed for precise lubrication tasks in workshops and service bays, featuring a right-hand pull action for controlled dispensing. 600 cc reservoir for longer intervals between refills Max. pressure 3.5 kg/cm² for reliable delivery Compact 78.5×178×110 mm for tight workspaces Right-hand pull action for precise dosing Consistent lubrication performance that reduces downtime The pump delivers steady pressure and a generous 600 cc reservoir, which reduces the frequency of interruptions for refilling and helps keep maintenance cycles predictable. The specified 3.5 kg/cm² delivery ensures dependable flow for common greases and lubricants used in industrial and workshop environments. By providing controlled dispensing, the unit supports accurate lubrication of bearings, joints and moving parts, helping to limit wear and extend the service intervals of machinery. Compact, ergonomic design for everyday workshop use With dimensions of 78.5 × 178 × 110 mm and a weight of 1 kg, the device is built for portability and accessibility in confined spaces. The right-hand pull action gives technicians a familiar, repeatable motion for precise dosing while the compact body fits easily on service trolleys or in tool cabinets. The lightweight construction simplifies handling during repetitive tasks and makes the pump suitable for mobile maintenance teams who require a reliable, hand-operated solution. Practical maintenance benefits and straightforward operation This manual lubricant pump is designed for uncomplicated, robust use: the hand operation eliminates dependence on electrical supply and reduces complexity in the workshop. The simple mechanical design allows for quick visual checks and routine cleaning, supporting uptime and a low total cost of ownership. When deployed as part of a structured lubrication routine, the pump contributes directly to smoother production flows and consistent plant reliability. Contact Metav Werkzeuge in Emmerich for supply options, application guidance and delivery details for the EA-8R hand lubricant pump — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: EA-8R GTIN: 4061905090301 ECLASS: 23069090 Brand: Vertex Facts Capacity: 600 cc Max. pressure: 3.5 kg/cm² Dimensions: 78.5 × 178 × 110 mm Weight: 1 kg Special features Manual hand-operated pump Right-hand pull action Compact, portable design Intended for lubricant dispensing FAQ What is the reservoir capacity of the pump? The EA-8R features a 600 cc reservoir, which reduces refill frequency during routine maintenance tasks. What delivery pressure can be expected from this unit? The pump provides up to 3.5 kg/cm² delivery pressure, suitable for reliable lubricant distribution in workshop applications. Is the EA-8R suitable for mobile maintenance teams? Yes, the compact dimensions and 1 kg weight make the EA-8R appropriate for mobile technicians and tight workspaces. How does the right-hand pull action affect operation? The right-hand pull action offers controlled, repeatable dosing that supports precise lubrication of bearings and moving parts. Who manufactures the EA-8R? The EA-8R is produced by Vertex and is supplied via Metav Werkzeuge for distribution in Europe. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of compact dimensions, a 600 c.c reservoir and a rated 3.5 kg/cm² delivery pressure for dependable manual lubrication in confined workshop environments; order the pump directly via Metav Werkzeuge or ask our consultants for technical advice. EA-8L Hand lubricant pump by Vertex — left-pull lever, 600 c.c reservoir EA-8L is a manually operated lubrication pump designed for targeted grease and oil delivery in small to medium workshop applications, where compact size and reliable pressure are essential. Hand lubricant pump »EA-8L« by Vertex 600 c.c reservoir for extended operation Max pressure 3.5 kg/cm² for consistent flow Compact 78.5×178×110 mm for tight spaces Reliable manual lubrication for routine tasks The pump delivers precise, manual lubrication through a tried-and-tested lever mechanism that is purpose-built for workshop use. By combining a compact 600 c.c reservoir with a robust lever action, the unit provides a steady supply of lubricant without electrical power, reducing complexity at the point of use. The manual operation ensures simple control over dose and timing; this is particularly advantageous where intermittent lubrication or spot application is required and where pneumatic or electric systems are impractical. Consistent delivery pressure for effective lubrication Engineered to produce up to 3.5 kg/cm² delivery pressure, the device sustains sufficient flow to reach bearings and fittings commonly found in maintenance environments. The rated pressure supports reliable displacement of viscous lubricants, improving contact between lubricant and component and reducing the frequency of corrective maintenance. The term delivery pressure refers to the maximum working output generated by the lever mechanism, which in practice results in consistent grease or oil transfer when used with standard workshop-grade lubricants. Space-saving design with practical handling With compact dimensions of 78.5×178×110 mm and a lightweight construction of 1 kg, the pump is easy to position in cramped work areas and can be carried between workstations without effort. The left-pull lever orientation provides a defined ergonomic action suited to common bench setups; the simplified mechanical layout makes routine upkeep straightforward, and basic visual checks of the transparent or removable reservoir allow quick verification of lubricant level. The combination of small footprint and full-capacity reservoir reduces interruptions during routine servicing operations. Contact Metav Werkzeuge for tailored advice on the EA-8L hand lubricant pump and to confirm delivery options from our Emmerich stock; our specialists will advise on compatibility and availability Technical Data Article number: EA-8L GTIN: 4061905090097 Manufacturer: Vertex Core data Weight: 1 kg Dimensions: 78.5 x 178 x 110 mm Capacity: 600 c.c Max pressure: 3.5 kg/cm² Special features Type: left-pull lever eClass: 23069090 Category: Vertex FAQ What lubricants are suitable for this pump? The EA-8L hand lubricant pump is suitable for common workshop greases and oils compatible with manual dispensing; viscosity limits are determined by the lubricant type and ambient temperature. Can the reservoir be refilled during operation? Refilling the reservoir requires pausing dispensing; the reservoir design permits straightforward refills to minimise downtime between servicing cycles. Is the lever orientation reversible for right-handed operation? This model is supplied with a left-pull lever; adaptations for an alternative lever orientation are not specified for the EA-8L and would require a different model. How does the EA-8L help reduce maintenance frequency? By providing a controlled and repeatable supply of lubricant at up to 3.5 kg/cm², the unit improves lubricant distribution to bearings and joints, supporting longer intervals between corrective maintenance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of 0.1 accuracy, a 3,600 rpm spindle and a compact footprint (600 x 550 x 660 mm) to achieve consistent, repeatable processing of round bars. Order the machine directly via Metav Werkzeuge or ask our consultants if further clarification is required. VEC-500G Precision cutting and grinding machine — 0.1 accuracy, 3,600 rpm | Vertex The VEC-500G is a compact precision cutting and grinding machine designed for efficient processing of round bars in workshop and light production environments. High-precision 0.1 accuracy Spindle speed up to 3,600 rpm Compact footprint 600 x 550 x 660 mm Robust 92 kg industrial build Consistent tolerances for repeatable production The system delivers high-precision results thanks to an accuracy value of 0.1, which ensures consistent part tolerances and reduces the need for rework. Combined with a 3,600 rpm spindle, the machine supports smooth cutting and grinding operations that are optimised for throughput and surface quality. For users less familiar with metrology figures, the stated accuracy indicates the repeatability one can expect during consecutive cuts; in practice this means fewer scrapped parts and more reliable batch outputs. Space-efficient design that stabilises performance With a compact footprint of 600 x 550 x 660 mm and a solid 92 kg construction, the unit is engineered for stability in confined workshop spaces. The mass and layout contribute to reduced vibration during operation, which directly benefits surface finish and dimensional stability when working with round bars. The balanced design allows placement close to other production equipment without compromising accessibility or safety. Engineered for straightforward integration and dependable operation Built for routine industrial use, the machine combines precision cutting and grinding functions in a single, sturdy package that minimises setup complexity. The straightforward mechanical concept supports short changeover times and predictable operation, enabling integration into small-scale production lines or toolrooms. The durable construction and clear technical identifiers simplify planning for maintenance and spare parts, contributing to lower lifetime disruption and steady productivity. Contact Metav Werkzeuge for customised specification guidance and reliable delivery from Emmerich – request a detailed data sheet or a technical consultation for the Vertex VEC-500G today Technical data Article number: VEC-500G GTIN: 4061905092374 ECLASS: 21060190 Manufacturer: Vertex Numbers Dimensions: 600 x 550 x 660 mm Weight: 92 kg Accuracy: 0.1 Speed: 3,600 rpm Special features Precision cutting and grinding for round bars Compact workshop footprint Robust industrial construction Designed for reliable, repeatable operation FAQ What applications is this machine suitable for? The Vertex VEC-500G precision cutting and grinding machine is designed primarily for processing round bars, offering both cutting and finishing functionality for small-batch production and workshop tasks. How precise are the cuts produced by this equipment? The machine achieves an accuracy of 0.1, which denotes close repeatability in consecutive operations and supports tight tolerances for components produced from round bars. What operating speed does the spindle reach? The spindle operates at up to 3,600 rpm, a speed level selected to balance cutting efficiency and surface quality for typical bar materials. What are the physical dimensions and mass of the unit? The unit measures 600 x 550 x 660 mm and has a mass of 92 kg, offering a compact but stable platform suited to workshop environments. Where can technical identifiers for procurement be found? Key identifiers such as SKU VEC-500G and GTIN 4061905092374 are listed in the technical data, providing the necessary information for ordering and inventory systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Taking advantage of high repeatability and a 3600 rpm spindle, this machine combines reliable throughput with tight tolerances for efficient bar processing; its compact footprint and robust 95 kg construction support stable operation and straightforward workshop integration. Order the unit directly via Metav Werkzeuge or ask the consultants for application advice. Vertex VEC-600G — Precision cutting and grinding machine with 3600 rpm spindle The Vertex VEC-600G is a precision cutting and grinding machine intended for the processing of round bars, combining controlled spindle speed with consistent accuracy for workshop and light industrial use. Precision cutting with 0.1 accuracy Up to 3600 rpm spindle speed Designed for round bar processing Robust 95 kg compact footprint Faster, consistent throughput through measured precision The VEC-600G delivers measured accuracy and steady cycle times thanks to its controlled spindle performance. With a nominal 3600 rpm rating and a specified accuracy of 0.1, the unit reduces rework by maintaining repeatable cuts and grinding operations. For production environments this means fewer non-conforming parts and a more predictable output rate. The term accuracy here refers to the machine’s capacity to reproduce set positions and cuts with minimal deviation, which is critical when preparing material for subsequent machining or inspection steps. Practical workshop integration with a compact layout Engineered for processing round bars, the machine’s compact footprint (600x550x720mm) and solid 95 kg mass enable stable mounting on a bench or dedicated stand without excessive floor usage. The compact dimensions simplify placement near existing workflows, while the substantial weight contributes to vibration damping during cutting and finishing. For practical planning, the specification data should be used to confirm spatial and handling arrangements in the workshop before installation. Robust design that eases routine handling and upkeep Constructed to withstand regular workshop use, the VEC-600G focuses on straightforward serviceability and durable performance. The robust frame and accessible working area make routine checks and basic maintenance operations manageable within typical maintenance intervals. Descriptions such as “grinding” and “cutting” denote separate process stages: grinding refines surface finish and dimensional accuracy, while cutting performs material separation. Together they allow a single station to prepare round bar stock ready for downstream machining or assembly. Contact Metav Werkzeuge in Emmerich for application guidance, tailored quotations and technical clarification: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271 Technical data Article number: VEC-600G GTIN: 4061905092299 Manufacturer: Vertex Dimensions: 600 x 550 x 720 mm Weight: 95 kg Spindle speed: 3600 rpm Accuracy: 0.1 ECLASS: 21060190 Core specifications Speed: 3600 rpm Weight: 95 kg Accuracy: 0.1 Dimensions (L x W x H): 600 x 550 x 720 mm GTIN: 4061905092299 Applications & features Intended for round bar processing Combined cutting and grinding functions Compact workshop footprint Robust construction for stable operation Vertex brand machine FAQ Is this machine suitable for processing round bars? Yes. The Vertex VEC-600G precision cutting and grinding machine is designed specifically for the efficient processing of round bars. What spindle speed does the machine provide? The unit is specified with a spindle speed of 3600 rpm, enabling controlled cutting and finishing operations. What level of accuracy can be expected? The machine is specified with an accuracy of 0.1, which supports consistent, repeatable results in cutting and grinding tasks. What are the unit’s dimensions and weight? The VEC-600G measures 600 x 550 x 720 mm and has a weight of 95 kg, offering a compact yet stable platform for workshop use. Is the machine suitable for small workshop installations? With its compact dimensions and robust mass, the Vertex VEC-600G is suitable for many workshop layouts where stable, space-efficient processing is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust 3,200 Kgs clamping force, a 600×600 mm table surface and bidirectional rotation ensure stable workholding and flexible positioning for heavy machining. Order the Precision Indexing Table directly via Metav Werkzeuge or ask our consultants if needed. Precision Indexing Table VIT-600-5 — heavy-duty rotary workholding with 600×600 mm surface The Precision Indexing Table VIT-600-5 is a heavy-duty rotary workholding unit designed for precise indexing and stable clamping in machining applications, offering a large table area and robust force for demanding setups. Heavy-duty 600×600 mm table surface 3,200 Kgs clamping force Bidirectional rotation for flexible setups Graduation 1° or 5° for precision indexing Built for heavy machining with stable workholding The rotary unit delivers exceptional stability through its 3,200 Kgs clamping force, which reduces vibration and improves surface finish on heavy or irregular workpieces. The generous 600×600 mm table area supports larger components and simplifies fixturing on the shop floor. This combination reduces the need for repeated reclamping and contributes directly to shorter cycle times and higher first-pass yields. Precise indexing for repeatable positioning A clear Graduation 1°/5° option and an Accuracy 3 rating provide dependable angular positioning for stepped machining and fixture alignment. The indexing choices allow for both coarse and fine setups: use the 5° division for rapid orientation changes and switch to 1° for tasks that demand finer angular control. The design converts angular selections into reliable mechanical positioning, making complex multi-axis operations easier to programme and verify. Flexible integration into machining workflows The table features a T-slot 20 mm pattern that accepts standard clamps and fixturing elements, enabling straightforward integration with existing tooling. Bidirectional rotation permits clockwise and counterclockwise indexing, allowing the unit to adapt to different tool paths and machine kinematics without additional setup. The table’s mechanics are conceived to support continuous rotation in either direction for versatile process design. Robust construction for long service life Engineered for workshop durability, the unit’s substantial mass (400 kg) and rugged components absorb cutting forces and maintain alignment under load. The mechanical layout prioritises longevity and low-maintenance operation, which reduces downtime and preserves machine accuracy over prolonged use. Where stability and repeatability are required, the rotary table serves as a reliable foundation for precision machining tasks. Contact Metav Werkzeuge to discuss how the VIT-600-5’s heavy-duty clamping and precise indexing can be configured for current machining requirements and to request a tailored quotation from our specialists. Technical Data SKU: VIT-600-5 GTIN: 4061905091735 Name: Präzisions-Indexiertisch (Precision Indexing Table) Manufacturer: Vertex Facts Table dimension: 600×600 mm Height: 200 mm Weight: 400 kg Clamping force: 3200 Kgs T-slot: 20 mm Accuracy: 3 Graduation: 1° or 5° Special features Rotates clockwise and counterclockwise Heavy-duty construction suitable for machining environments Large table area for simplified fixturing FAQ What is the clamping force of the unit? The VIT-600-5 provides a clamping force of 3,200 Kgs, offering robust workholding for heavy components. What are the table dimensions and overall height? The rotary table has a 600×600 mm surface and a height of 200 mm. Is the table able to rotate both ways? Yes, the unit rotates clockwise and counterclockwise to suit different machining sequences. What readout options are available for indexing? Indexing can be set to a Graduation 1° or 5°, allowing for coarse or fine angular positioning. How heavy is the rotary table? The unit weighs 400 kg, reflecting its solid construction for stable machining. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining a spacious 600×600 mm work surface with a 3,200 Kgs clamping capability and selectable indexing of 1° or 5°, this configuration delivers stable, repeatable positioning for heavy machining tasks; the robust construction and 20 mm T-slot support secure fixturing and bidirectional rotation. Order the VIT-600-1 directly via Metav Werkzeuge or consult our advisors for application-specific guidance. VIT-600-1 Precision indexing table — 600×600 mm, 3,200 Kgs clamping force (Vertex) The VIT-600-1 is a precision indexing table designed for heavy-duty machining and fixture work, offering a 600×600 mm table and the ability to rotate both clockwise and counterclockwise for flexible setup options. 600×600 mm work surface 3,200 Kgs clamping force Indexing selectable in 1° or 5° 20 mm T-slot for secure fixturing Heavy-duty positioning that reduces setup time The substantial 600×600 mm table and a solid build mass of 400 kg enable stable placement of large workpieces, reducing vibration and improving machining consistency. Combined with a 3,200 Kgs clamping force, the unit holds heavy fixtures securely, which shortens setup and changeover times in production environments. This results in fewer re-checks between operations and a more predictable machining flow, supporting higher throughput in workshops that demand durability without sacrificing precision. Precision indexing for repeatable multi-angle operations With indexing selectable in 1° or 5° increments and accuracy class 3, the rotary device provides reliable angular positioning for milling, drilling and inspection tasks. The selectable readout increments make it straightforward to switch between coarse and fine angular steps depending on the workpiece requirement, while the defined accuracy rating offers an objective basis for process planning. For fixtures and jigs that require exact rotational alignment, this precision indexing table simplifies programming and manual setups alike. Secure clamping and versatile fixturing for complex parts A T-slot 20 mm across the work surface allows a wide range of clamping elements and modular fixturing to be mounted without compromise. The table’s ability to rotate clockwise and counterclockwise supports left- and right-handed machining sequences and enables smoother tool paths. The arrangement of slots and the high clamping force reduce movement during heavy cuts, which helps maintain tool life and surface quality. The moderate overall height of 200 mm offers compatibility with typical machining centres and fixture stacks. Built for integration and dependable operation Designed for workshop integration, the indexing table’s robust construction and clear technical specification make it suitable for demanding production and prototype tasks. At approximately 400 kg, the unit requires a stable mounting platform but pays back in steady performance and fewer interruptions. Supplied by Vertex and available through Metav Werkzeuge, this solution is intended to bring dependable repeatability into everyday machining routines while easing concerns about supply chain and quality control across the European market. For heavy-duty precision and secure fixturing, contact Metav Werkzeuge to discuss the Vertex VIT-600-1 and arrange delivery from our Emmerich quality hub Technical data Article number: VIT-600-1 GTIN: 4061905090608 Manufacturer: Vertex Core data Table dimension: 600×600 mm Height: 200 mm Weight: 400 kg Clamping force: 3,200 Kgs T-slot width: 20 mm Accuracy: class 3 Readout / increment: 1° or 5° Special features Table rotates clockwise and counterclockwise Bidirectional indexing capability Robust construction for heavy fixturing Suitable for precision machining setups FAQ What are the table dimensions? The VIT-600-1 precision indexing table provides a 600×600 mm work surface suitable for large fixtures and multi-part assemblies. What clamping capacity does the unit offer? Clamping capability is specified as 3,200 Kgs, giving a secure hold for heavy fixtures when using the available T-slot arrangements. How precise is the angular positioning? Indexing is selectable in 1° or 5° steps with an accuracy class 3, providing consistent repeatability for multi-angle machining and inspection tasks. Can the table rotate in both directions? Yes — the worktable rotates clockwise and counterclockwise, enabling flexible machining strategies and smoother tool access for complex geometries. What are the installation dimensions and mass? The unit has a height of 200 mm and a mass of approximately 400 kg; a stable mounting base is recommended for optimum performance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the expandable rubber design, compact 600 x 850 mm footprint and low mass for straightforward integration into existing workflows; these features combine to provide effective guarding with minimal interference in the work envelope. Order the item directly via Metav Werkzeuge or consult the Metav team for configuration advice. VGC-6085B — Vertex expandable rubber machine guard, 600 x 850 mm VGC-6085B is an expandable rubber machine guard designed to protect machine openings and nearby components in production and workshop environments Expandable design for tailored coverage Robust rubber construction reduces wear Compact size: 600 x 850 mm footprint Light-weight at 2 kg for easy handling Reliable protection that preserves machine access The expandable rubber construction provides a resilient barrier that shields sensitive components and tooling from chips, coolant and incidental contact while preserving operator access. The flexible material absorbs minor impacts and resists abrasion, so the guarded area remains intact under routine workshop conditions. By deploying a lightweight, 600 x 850 mm panel, installation minimises obstruction of the work area and keeps maintenance simple; the reduced mass aids handling and repositioning when machine setup changes are required. Designed for simple integration and practical instrument storage Configured with a rear-side provision compatible with precision calipers, the guard allows straightforward organisation of measuring tools without compromising protection. The design enables simple attachment to existing frames or machine covers and can be adapted to different machine envelopes thanks to its modular expansion capability. This combination of durable material and adaptable geometry supports efficient machine setup and reduces time lost to arranging temporary protection or improvised covers. Built for workshops that demand dependable safeguards Constructed from resilient rubber, the guard withstands common shop exposures and requires minimal upkeep, supporting continuous production with fewer interruptions. The compact format and moderate weight mean that changes to the guarding arrangement can be completed quickly, improving throughput and safeguarding personnel and equipment alike. As a Vertex product, the component aligns with established industry expectations for robust workshop accessories and is suitable where a balance between protection and access is essential. Choose the Vertex VGC-6085B for adaptable machine protection and contact Metav Werkzeuge for tailored advice or supply from our Emmerich quality hub. Technical data Article number: VGC-6085B GTIN: 4061905092046 Brand: Vertex Material: Rubber Dimensions: 600 x 850 mm Weight: 2 kg Eclass: 24322502 Core data Dimensions (mm): 600 x 850 Weight (kg): 2 GTIN numeric: 4061905092046 Eclass numeric: 24322502 Features and applications Expandable design for variable coverage Rear-side provision for precision caliper placement Suitable for machine openings and component protection Low-maintenance rubber construction FAQ What environments is the VGC-6085B best suited for? The VGC-6085B is intended for production and workshop settings where a flexible, resilient guard is required to protect machine openings and nearby equipment from chips, coolant and incidental impact. Can the guard be adapted to different machine sizes? Yes, the expandable design of this machine guard allows adaptation to varying machine envelopes and can be reconfigured to suit different installations. Does the material resist common workshop fluids and abrasion? Made from rubber, the VGC-6085B offers good resistance to abrasion and typical workshop fluids, providing reliable protection with minimal maintenance. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining IP54 ingress protection with a compact 60 mm diameter and a robust, high-visibility LED, this unit delivers dependable status indication in damp or dusty industrial environments. Secure supply and consultation are available through Metav Werkzeuge for straightforward procurement and reliable after-sales advice. VLED-5SL LED signal light — waterproof, high-visibility indicator (Vertex) The VLED-5SL is a compact LED signal light designed for machine status and panel indication in industrial settings, offering splash protection and strong visual presence for control stations and production lines. Robust IP54 protection against dust and splashes Compact 60 mm diameter fits tight mounting spaces High-brightness LED for clear visual signalling Durable construction; ideal for industrial use Assured visibility to reduce operational errors The unit’s high-brightness LED ensures unmistakable visual signalling across noisy production floors and varied lighting conditions, supporting faster recognition of machine states and reducing the risk of missed alarms. With IP54 protection, the indicator maintains functionality where splashes and coarse dust are present, contributing to continuous operation and fewer interruptions. Clear indication helps streamline workflows and supports compliance with workplace safety routines without requiring complex electrical upgrades. Space-saving design that simplifies installation A small footprint with a 60 mm diameter makes this signal lamp suitable for retrofitting into existing panels and machine housings where space is limited. At 0.77 kg net weight, the device is lightweight enough for straightforward handling while remaining substantial for stable mounting. The compact form factor reduces the need for extensive panel modifications, shortening installation time and lowering disruption to production when integrating additional visual status cues. Built for industrial use with straightforward lifecycle benefits Manufactured for demanding environments, the device combines a robust casing with easy-to-recognise light output, minimising maintenance intervals and replacement complexity. The VLED-5SL serves typical roles such as machine status indication, safety signalling and control-panel alerts, offering a practical balance between durability and clarity. Its classification and traceability support procurement processes and asset management in industrial facilities, helping to maintain predictable operational costs and supply continuity. Contact Metav Werkzeuge for procurement from our Emmerich quality hub and tailored advice on integrating Vertex signal indicators into production setups Technical Data Article number: VLED-5SL Manufacturer: Vertex GTIN: 4061905093999 ECLASS: 27110631 ETIM: EC001959 Core data Diameter: 60 mm Weight: 0.77 kg Protection class: IP54 Features Waterproof and bright High-visibility LED indicator SKU: VLED-5SL FAQ What protection does the unit offer against water and dust? The indicator features an IP54 rating, which means the housing resists dust ingress to a limited degree and protects against water splashes from any direction, suitable for many indoor industrial applications. Is the device suitable for retrofitting into existing control panels? Yes. The compact 60 mm diameter and moderate weight make the unit appropriate for retrofits and tight mounting spaces where minimal panel modification is preferred. Can the VLED-5SL be used for safety signalling on machines? The VLED-5SL is designed for clear machine status and safety signalling in production environments; suitability should be confirmed against site-specific safety standards and application requirements. How does the VLED-5SL perform in harsh production areas? With a rugged housing and IP54 protection, the device withstands common workshop conditions such as dust and splash exposure, providing reliable indication with low maintenance needs. Where can the Vertex VLED-5SL be procured for industrial projects? Metav Werkzeuge supplies the Vertex VLED-5SL and can advise on selection and integration to match specific production requirements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact, IP54-rated LED signalling with a Ø60 mm housing and robust 0.7 kg construction ensures reliable visual status indication in harsh environments; order the VLED-3SL directly via Metav Werkzeuge or consult the Metav advisors for specification matching and supply. VLED-3SL LED signal light — Vertex, IP54 protection, compact Ø60 mm The VLED-3SL LED signal light is a compact, IP54-rated signalling device designed for industrial control panels and machinery, offering high-visibility indication in environments exposed to dust and splashing water. IP54 protection against dust and splash High-intensity LED signalling Compact Ø60 mm housing Robust 0.7 kg industrial design Consistent visual signalling for demanding workflows The unit delivers clear visual indication through high-intensity LED illumination that remains legible under bright ambient light and factory conditions. Thanks to the IP54 rating, the device is protected against limited dust ingress and splashing water, which reduces the likelihood of signalling faults in routine production environments. This reliability supports continuous process monitoring and contributes to smoother machine operation by minimising unclear status signals and downtime. Compact footprint that simplifies installation planning With a Ø60 mm housing and a compact profile, the signal beacon occupies minimal panel space, enabling denser arrangement of indicators and controls within existing switchgear or control cabinets. The comparatively light 0.7 kg mass supports secure mounting without imposing significant load on panels or brackets. The compact design therefore aids efficient control layout and facilitates retrofitting into systems where space is constrained, while maintaining robust signalling performance. Durable design aimed at long-term operational uptime Constructed for industrial settings, the device combines a resilient enclosure with high-visibility LEDs to provide dependable service over extended operating periods. The unit’s resistance to environmental influences and mechanical resilience reduces the need for frequent replacement, contributing to lower maintenance intervals and predictable operational costs. Manufactured under the Vertex name, the product aligns with established industrial quality expectations and supports steady production workflows. Discuss the Vertex VLED-3SL IP54 LED signal light with Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and arrange supply Technical data Article number: VLED-3SL GTIN: 4061905084102 Brand: Vertex Facts Diameter: 60 mm Weight: 0.7 kg ECLASS: 27110631 ETIM: EC001959 Special features Protection rating: IP 54 Description: LED signal light Marketing note: water-resistant and bright SKU: VLED-3SL FAQ What environments is the signal light suitable for? The VLED-3SL is intended for industrial environments such as control panels and machinery areas where IP54 protection against dust and splashing water is required. How does the IP54 rating affect performance? An IP54 rating means the enclosure provides protection against limited dust ingress and splash water, helping the VLED-3SL maintain reliable signalling in exposed workshop conditions. What is the installation footprint of the unit? The unit features a Ø60 mm housing that is optimised for compact panel mounting and space-conscious control layouts. Is the device heavy to handle during installation? At approximately 0.7 kg, the signal light is sufficiently robust while remaining light enough for straightforward mounting in standard control panels. How can the VLED-3SL be ordered or specified for a project? Specification and ordering for the Vertex VLED-3SL can be arranged through Metav Werkzeuge; refer to the SKU VLED-3SL and GTIN 4061905084102 when placing enquiries. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact solution that combines precise dimensions and low weight for efficient LED installations; the slim profile and 60×30 mm footprint ensure space-saving mounting while the light 0.16 kg mass reduces load on fixtures. Order the bracket directly via Metav Werkzeuge or contact our consultants for tailored advice. Vertex V-22 mounting bracket 60×30 mm for LED lamps The V-22 mounting bracket is a compact mounting solution for LED lamps, designed for tidy, space-saving installations in workshops, retail and industrial lighting setups 60×30 mm compact mounting angle Lightweight at 0.16 kg Designed for LED lamps Space-saving mounting that simplifies installation The mounting bracket offers a compact 60×30 mm footprint that supports tidy fixture placement where room is limited. Its slim profile reduces visual clutter and allows luminaires to be mounted close to surfaces or within narrow profiles, which is particularly useful in retrofit projects and confined installations. By keeping dimensions consistent and predictable, assembly planning becomes more straightforward and supplier selection more efficient. Faster assembly and reduced handling effort Thanks to its lightweight design, handling and aligning the bracket during assembly is noticeably easier, reducing time at the workbench and lowering the risk of strain during repeated fittings. The straightforward shape supports standard mounting workflows and speeds up fixture alignment, contributing to measurable time savings on installation jobs. This translates into lower labour input per fitting and a smoother workflow for maintenance and replacement tasks. Versatile use across lighting projects Suitable for use with a wide range of LED lamps, the bracket is intended for both new installations and retrofits in commercial, workshop and display environments. Its neutral form factor enables unobtrusive integration with different fixture types while maintaining reliable support for mounted luminaires. Supplied under the Vertex brand as SKU V-22, the part fits into standard inventory systems and simplifies procurement for trades and facilities teams. Practical considerations for procurement and stock The slim dimensions and low weight make the bracket an economical choice for stocking: it occupies little storage space while remaining easy to pick and dispatch. For buyers seeking consistent quality, the item is available through Metav Werkzeuge, which acts as a quality filter for the European market and supports reliable supply chains. Where specific mounting requirements exist, consultants can advise on compatibility and quantity planning to match project schedules. Contact Metav Werkzeuge today to secure the V-22 mounting bracket for your next LED project and benefit from our stocking and consultation services Technical data SKU: V-22 GTIN: 4061905095276 Type: Mounting bracket 60×30 mm Category: Accessories for LED lamps Manufacturer: Vertex Facts Dimensions: 60×30 mm Weight: 0.16 kg Versions / Features Suitable for LED lamps Image: V-22-main.png Brand: Vertex FAQ What are the exact dimensions of the bracket? The V-22 mounting bracket measures 60×30 mm, providing a compact footprint for tight installations. Is the bracket suitable for commercial LED luminaires? Yes, the accessory is designed for use with LED lamps and fits common lighting applications in commercial and workshop environments. How much does the bracket weigh? The bracket has a weight of 0.16 kg, which aids handling and reduces load on mounted fixtures. Under which SKU is this part listed? This mounting bracket is listed as SKU V-22 and supplied by Vertex. Is an image available to check the design before purchase? An image file is available (V-22-main.png) to assist with visual inspection prior to ordering. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of compact dimensions, LED compatibility and lightweight handling for efficient mounting in confined installations. Order the bracket directly via Metav Werkzeuge or ask the specialists for technical clarification. V-54 Mounting bracket 60 x 75 mm for LED lamps (Vertex) A V-54 mounting bracket for secure, space-saving attachment of LED lamps in compact or retrofitted installations Compact 60 x 75 mm design Lightweight at 0.28 kg Compatible with LED lamps Vertex brand accessory Save space without compromise The compact 60 x 75 mm footprint makes this mounting accessory ideal where installation space is limited. Designed as a practical solution for attaching LED fittings, the bracket supports neat routing and discreet placement of luminaires. The reduced spatial demand contributes to quicker planning and a tidier final installation, improving workflow efficiency in both retrofit and new-build projects. Fast integration with LED fixtures Engineered for straightforward alignment, the bracket simplifies mechanical attachment of LED lamps and associated housings. Its design enables repeatable placement and predictable geometry, which reduces alignment time during assembly. For projects that prioritise installation speed and consistent results, this accessory provides a pragmatic way to standardise mounting across multiple luminaires. Easier handling and ergonomic installation At 0.28 kg, the bracket is lightweight yet practical for handling on ladders or in tight spaces. The lower mass reduces installer fatigue during repetitive tasks and streamlines assembly for small teams. Where repeat installations are required, the reduced handling effort can translate into measurable time savings and steadier working conditions on site. Reliable sourcing and workshop-ready logistics Supplied under the Vertex name and distributed via Metav, the accessory benefits from a dependable supply chain geared to industrial and trade customers. Metav’s role as a quality filter for the European market ensures that procurement is backed by decades of expertise, stocked logistics and a wide product range that helps consolidate sourcing for workshops and wholesalers. Contact Metav Werkzeuge for tailored technical information on the Vertex V-54 mounting bracket: email info@metav-werkzeuge.com, phone +49 2822 7131930 or WhatsApp +49 170 2837271 for precise specification support Technical data Article number: V-54 GTIN: 4061905088360 Brand: Vertex Facts Dimensions: 60 x 75 mm Weight: 0.28 kg eCl@ss: 27110390 Features Suitable for LED lamps Category: Zubehör Thumbnail available (V-54.png) FAQ Is the bracket suitable for indoor LED luminaires? The V-54 mounting bracket is intended for use with LED lamps and fits compact installations; compatibility should be checked against the lamp housing and mounting points. What are the exact dimensions and weight? Dimensions are 60 x 75 mm and the bracket weighs 0.28 kg. Can the accessory be used with third-party fixtures? The Vertex V-54 mounting bracket can be used with many LED fittings; verification of hole pattern and mounting clearances is recommended before installation. What identifiers should be quoted when ordering? Please quote SKU V-54 and GTIN 4061905088360 when enquiring or ordering the Vertex mounting bracket. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the compact 60 x 75 mm format and low weight to simplify LED fixture installations; the bracket combines space-saving support with straightforward handling for quick retrofits. Order the part directly via Metav Werkzeuge or consult our product specialists for application advice. Vertex V-27 Mounting Bracket – Angle 60 x 75 mm for LED Lamps The V-27 is a compact angle bracket designed to secure LED luminaires where space is limited, offering a simple support solution for fixture mounting and retrofitting. Vertex V-27 angle bracket 60 x 75 mm Designed for LED lamps and fixtures Lightweight 0.28 kg for easy handling Space-saving compact installation profile Secure mounting in confined assemblies A dedicated mounting bracket that converts a small footprint into reliable support, the 60 x 75 mm profile is intended for applications where minimal intrusion is essential. The bracket provides a fixed angle support for LED luminaires, enabling installers to position fittings cleanly against panels, housings or mounting rails. Its compact design reduces the need for additional framing and simplifies alignment during installation, which translates into measurable time savings on repetitive fitting tasks. Faster, more efficient installation and handling The bracket’s low mass and modest dimensions mean fewer handling constraints on the workbench and during transport: at 0.28 kg the component is easy to manipulate and aligns quickly in place. Reduced handling time supports more efficient labour cycles, especially for batch installations or retrofit projects. For technicians and workshop managers, the clear advantage is a quicker mounting routine with fewer movements and a reduced need for extra fastening aids, contributing to lower overall installation time per luminaire. Practical stock and logistics advantages for production As an accessory intended specifically for LED lamps, this angle bracket is straightforward to store and issue on demand. The unobtrusive profile aids compact packaging and efficient shelving, which benefits procurement and reduces storage costs in busy workshops. In combination with Metav’s quality-filtered sourcing, the component serves workshops looking for dependable standard parts that streamline assembly and service operations while maintaining consistent quality across batches. Contact Metav Werkzeuge in Emmerich for availability, technical details and tailored advice relating to the Vertex V-27 mounting bracket Technical data Article number: V-27 GTIN: 4061905095092 Category: Accessory for LED lamps Facts Weight: 0.28 kg Dimensions: 60 x 75 mm eCl@ss: 27110390 Special features Suitable for LED lamps Product type: Mounting bracket (angle) SKU: V-27 Thumbnail image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/be/2f/97/63/63972fbec806fb82109e363e/V-27.png FAQ What is the primary application of this mounting bracket? The Vertex V-27 mounting bracket is intended for securing LED luminaires in situations where a compact angle support is required; it is marketed as an accessory for LED lamps. What are the exact dimensions and weight of the bracket? The component measures approximately 60 x 75 mm and has a weight of 0.28 kg as specified for the Vertex V-27. Is the V-27 suitable for retrofit installations? Yes, the compact profile and modest weight make the Vertex V-27 suitable for retrofit work where minimal alteration to the existing structure is preferred. Does the product data specify the material or surface finish? The available product data for the Vertex V-27 does not specify material or coating details; consult the technical documentation for those attributes. How is the bracket classified for procurement and inventory? The bracket is listed as an accessory for LED lamps (eCl@ss 27110390) and supplied under SKU V-27 for inventory and ordering purposes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan