Ausstattungen für Fräsmaschinen

Robust, self-centring clamping with an 800 kgf rated jaw force and an opening range of 0–90 mm ensures secure, repeatable workholding for precision milling and drilling. The cast iron construction combined with an accuracy of 0.01 mm supports consistent component tolerances. Order directly via Metav Werkzeuge or consult our specialists for specification advice. Machine vice VCV-1090 by Vertex — self-centring, 800 kgf clamping force The Machine vice is a self-centring mechanical vice designed for precision clamping in milling, drilling and general workshop machining applications Self-centring jaws for quick set-up 800 kgf clamping force Opening range 0–90 mm Cast iron body for stability Precision clamping that delivers consistent results The Vertex VCV-1090 offers a combination of high clamping force and fine positional control that reduces rework and cycle variation. With 800 kgf jaw force and an accuracy of 0.01 mm, the clamping unit keeps components stable under load, which translates into fewer rejected parts and predictable machining results. The self-centring mechanism aligns paired workpieces automatically, reducing set-up time and ensuring symmetric clamping without manual jaw adjustments. Designed for efficient workshop workflows A compact footprint and straightforward mechanical operation simplify integration into production cells and manual benches. The 0–90 mm opening range covers a wide variety of common workpieces, enabling rapid changeovers between jobs. Where rotation is required, an optional rotary base can be specified to increase flexibility without replacing the primary clamping device. This focus on practical adaptability supports smoother throughput and faster preparation for milling and drilling operations. Built to withstand daily industrial use Constructed from cast iron, the vice provides excellent damping properties and resistance to deformation under repeated loads, extending useful life and maintaining machining accuracy. The mechanical design is intentionally robust to minimise routine maintenance requirements; routine lubrication of the lead screw and periodic inspection of the jaw faces are typically sufficient to retain performance. This durability reduces downtime and contributes to lower total cost of ownership over the life of the tool. Practical integration and measurable benefits The unit’s clear dimensional specification and defined performance metrics make it straightforward to plan fixturing and process flows. The vice’s measured accuracy of 0.01 mm and solid clamping capacity support tight tolerances in series production, while its mechanical simplicity ensures predictable behaviour in both manual and CNC-assisted workstations. Delivery from a European quality hub like Metav reduces logistical uncertainty and offers a reliable supply channel for spare jaws and accessories. Contact Metav Werkzeuge in Emmerich to specify the Vertex machine vice VCV-1090 for your workshop, request tailored technical advice, or arrange a parts and accessories quotation via info@metav-werkzeuge.com Technical Data SKU: VCV-1090 GTIN: 4061905093449 Brand: Vertex Type: Mechanical eClass: 21020601 ETIM: EC002173 Core specifications Dimensions: 260 x 101 x 120 mm Weight: 17 kg Opening range: 0–90 mm Clamping force: 800 kgf Accuracy: 0.01 mm Materials & special features Material: Cast iron Self-centring jaws Optional rotary base available Mechanical design FAQ What clamping force does the vice provide? The Vertex machine vice VCV-1090 provides a clamping force of 800 kgf and is designed for secure holding in machining operations. What is the working opening range? The vice offers an opening range of 0–90 mm, allowing it to accommodate a broad range of workpiece sizes. How precise is the clamping and positioning? The clamping device supports an accuracy of 0.01 mm, suitable for applications with tight tolerance requirements. Is the vice self-centring and can it rotate? Yes, the vice features self-centring jaws; a rotary base is available as an optional accessory for additional rotational capability. What are the physical dimensions and weight of the unit? The vice measures 260 x 101 x 120 mm and weighs 17 kg, facilitating planning for bench or machine mounting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

High clamping force and self‑centring jaw action provide reliable grips for repeatable machining; the cast iron body reduces vibration for consistent surface finishes. Benefit from the compact footprint and optional swivel base for flexible positioning. Order the VCV-1090S directly via Metav Werkzeuge or ask our consultants if needed. VCV-1090S mechanical self‑centring machine vice with swivel base option The VCV-1090S is a self‑centring mechanical machine vice for precision clamping in milling and drilling operations, optionally supplied with a swivel base for enhanced workpiece access Self‑centring jaw operation Clamping force 800 kgf Cast iron body for stability Swivel base option with Ø248 mm foot Consistent precision through self‑centring clamping High repeatability is critical in production environments. The self‑centring jaw mechanism delivers parallel clamping across the jaw faces, reducing re‑setting between parts and cutting cycles. With a declared accuracy of 0.01 mm, the vice supports tight tolerances and dependable positioning, which translates into fewer rejects and lower rework rates. The specified opening range 0–90 mm covers a wide span of small to medium components, enabling uniform clamping of varied workpieces without extra fixtures. Robust construction for vibration damping and stability Built from cast iron, the vice offers mass and stiffness that damp cutting forces and limit chatter during heavy milling passes. The substantial weight of 27.5 kg and the broad Ø248×22 mm foot provide a stable base when bolted to machine tables, improving surface finish and tool life. The mechanical design focuses on longevity and uptime: wear is minimised by sturdy bearings and hardened contact faces, while the overall geometry maintains parallelism under load. These characteristics suit continuous workshop use and demanding jobbing environments. Flexible positioning and efficient setup An optional swivel base allows rapid orientation of the workpiece without repeated unclamping, helping to shorten cycle times and improve throughput on multi‑operation parts. The vice's clamping force of 800 kgf ensures secure hold during moderate to heavy cuts, reducing the risk of slippage and protecting both the tool and the component. The mechanical actuation is intuitive, offering straightforward operation and minimal maintenance compared with more complex hydraulic systems — a practical advantage for busy shops seeking reliable productivity. Designed for professional workshop workflows As a mechanical machine vice, this model is aimed at metalworking shops that prioritise robust, repeatable clamping. The combination of self‑centring functionality, measurable accuracy, and a sturdy cast iron body makes it suitable for batch production and prototype work alike. For procurement and application questions, Metav Werkzeuge provides detailed product information and guidance from Emmerich, helping to match the vice specification to machine table compatibility and clamping requirements. This support ensures a smooth integration into existing production processes. For robust, repeatable clamping choose the Vertex VCV-1090S from Metav Werkzeuge—contact Metav Werkzeuge in Emmerich for tailored advice or to arrange supply and delivery. Technical Data Article number: VCV-1090S GTIN: 4061905089558 Brand: Vertex Type: Mechanical machine vice Core specifications Dimensions: 260 × 101 × 120 mm Foot: Ø248 × 22 mm Opening: 0–90 mm Clamping force: 800 kgf Weight: 27.5 kg Accuracy: 0.01 mm Materials & special features Material: Cast iron Self‑centring jaws Option: Swivel base (with Ø248 mm foot) FAQ What is the maximum jaw opening of the vice? The vice offers an opening range of 0–90 mm, allowing clamping of small to medium workpieces. What clamping force can be expected from the vice? The VCV-1090S provides a clamping force of 800 kgf, ensuring secure holding for most milling and drilling tasks. What material is the vice made from and why does it matter? The vice is manufactured from cast iron, which adds mass and rigidity to damp vibrations and improve machining stability. Is a swivel base included with the vice? A swivel base is available as an option; the VCV-1090S can be supplied with or without the swivel base depending on the chosen configuration. How accurate is the vice for precision work? The vice is specified with an accuracy of 0.01 mm, supporting precision machining and repeatable setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a secure, standardised threaded connection and straightforward spare-part handling to keep workshop lighting reliable; the accessory’s M6x1P thread and compact mass ensure predictable installation and reduced downtime. Order the part directly via Metav Werkzeuge or consult the team for compatibility details. Vertex J-L01 accessory for VHL halogen lamp — M6x1P thread, compact The Accessory J-L01 is a mounting component for the Vertex VHL halogen lamp, engineered to provide a reliable threaded interface for workshop lighting assemblies. M6x1P threaded connection Compatible with VHL halogen lamps Compact mass of 0.6 kg Secure mechanical interface for dependable lighting The accessory provides a standard M6x1P threaded connection that creates a secure fit between lamp and mounting hardware, reducing the risk of slips or misalignment during routine tasks. A standardised connection accelerates assembly and maintenance, which translates into measurable savings in workshop labour time and fewer unplanned stoppages. The design supports predictable service procedures, meaning fewer interruptions to production and a smaller administrative burden for spare-part management. Predictable compatibility with VHL halogen lighting Supplied as a matched component for VHL halogen lamps, the part simplifies procurement and installation planning. The presence of a clear product identifier and GTIN facilitates inventory control and ensures the correct spare is selected during maintenance cycles. As a dedicated lamp accessory, it reduces compatibility checks and supports a consistent lighting setup across multiple workstations, promoting uniform illumination and safer working conditions. Compact mass for easy handling and safer installation With a mass of 0.6 kg, the mounting component is easy to manoeuvre during fitting and replacement, lessening handling strain and improving ergonomics for maintenance staff. The modest weight also reduces packaging and transport complexity within a workshop logistics chain, supporting quicker turnaround when parts are reordered. The compact nature of the component aids storage and keeps spares management efficient without occupying excessive shelf space. Practical spare-part strategy for workshops and service teams Listed under SKU J-L01, the component is suitable as a routine spare for lighting maintenance plans. Using standardised parts such as this supports systematic inventories and simplifies reorder thresholds. Clear identification via GTIN allows rapid cross-referencing in procurement systems and helps maintain consistent replacement cycles, which supports long-term operational reliability and budget predictability for facilities that prioritise uptime. For rapid replacement parts and expert advice on Vertex lighting accessories such as the J-L01, contact Metav Werkzeuge for competent guidance and reliable supply — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: J-L01 GTIN: 4061905083716 Designation: Accessory for halogen lamp VHL Category: Vertex Facts Weight: 0.6 kg Thread: M6x1P Special features SKU: J-L01 Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/bf/2f/97/63/63972fbfc806fb82109e3670/J-L01-main.png Shop title: Zubehör Vertex günstig Online bestellen FAQ What thread does the component use? The J-L01 features an M6x1P threaded connection for standardised mounting. Which lamps is the component compatible with? The accessory is designed for use with VHL halogen lamps, ensuring predictable compatibility for lighting assemblies. Is the part suitable as a workshop spare? Yes — the Vertex J-L01 is intended as a replacement or spare component for maintenance and is listed under SKU J-L01 for straightforward reorder. How heavy is the accessory and what does that mean for handling? Weighing 0.6 kg, the component is compact and easy to handle during installation and replacement, reducing physical strain for service personnel. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise cylindrical workholding and a compact, lightweight design to improve setup repeatability and throughput; order the VWS prism jaw insert directly via Metav Werkzeuge or consult Metav’s specialists for application advice. VWS Prism Jaw Insert (VWS-VJ-600) — Precision prism jaw for cylindrical workpieces The VWS Prism Jaw Insert is a precision clamping attachment designed to secure cylindrical and round components reliably during machining and inspection operations. Precision V-shaped seating for round stock Quick retrofit to standard jaws Robust, lightweight at 0.9 kg Compatible with the Vertex VWS family Precise seating for repeatable cylindrical clamping The prism-shaped seating provides a stable contact geometry that centres round workpieces and reduces lateral movement. This geometry translates into higher repeatability and fewer re-clamps, which supports consistent tolerances on turned and ground parts. The low mass of the insert, at 0.9 kg, shortens cycle times for changeovers and places less load on the vise or fixture, enabling faster processing without compromising stability. Simple integration and reduced setup time Designed as an attachment for existing jaw systems, the insert allows quick retrofitting to the VWS product family and similar clamping setups. The V-shaped profile locates a variety of diameters without the need for bespoke soft jaws, so fixture preparation becomes more efficient. This direct-fit approach reduces setup complexity and contributes to a smoother production flow, enhancing operational efficiency across batches. Durable function with straightforward maintenance The component is engineered for repetitive use in workshop environments; the prism form avoids localized point loads and distributes clamping force evenly across the workpiece. Regular visual checks and routine cleaning keep the seating surfaces free from chips and coolant residue, preserving clamping reliability. The pragmatic design means service requirements remain minimal while retaining consistent clamping performance over prolonged use. Suitable applications and practical benefits for workshops Ideal for small-batch machining, inspection benches and fixture stations, the jaw insert improves throughput where cylindrical accuracy matters. By centring round stock reliably, the accessory reduces manual alignment effort and lessens the likelihood of rework. Decision-makers gain a measurable benefit in process stability and time savings, supporting tighter production schedules and improved part quality. For precise, repeatable clamping choose the Vertex VWS prism jaw insert and contact Metav Werkzeuge for tailored advice and procurement support Technical data Article number: VWS-VJ-600 GTIN: 4061905093845 Designation: Prism jaw insert (Prismenaufsatzbacke) ECLASS: 21029205 Weight: 0.9 kg Core data Weight: 0.9 kg GTIN: 4061905093845 ECLASS: 21029205 Versions / Special features Product family: VWS Category: Vertex Images: vws-vk-4-main.jpg, vws-vl-4-detail.jpg FAQ What workpieces are best suited to the prism jaw insert? The prism jaw insert is intended for cylindrical and round components; the V-shaped seating centres such parts for machining and inspection with improved repeatability. Is the insert compatible with other Vertex VWS components? Compatibility is intended with the VWS product family; the design allows straightforward retrofitting to matching jaw systems and fixtures. How does the prism profile improve clamping accuracy? The prism profile provides two contact lines that centre the workpiece and distribute clamping forces, reducing lateral movement and improving positional repeatability during operations. What maintenance is required to keep the insert performing reliably? Routine cleaning to remove chips and coolant and periodic visual inspection of the seating surfaces are sufficient to maintain reliable clamping performance. Can the insert reduce setup times in small-batch production? Yes, by eliminating the need for individually machined soft jaws for round stock, the insert shortens setup times and supports faster changeovers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of a wide 0–100 mm clamping range, a stable 5.7 kg mass and a compact footprint to secure workpieces reliably and maintain consistent drilling quality; order the DV-100 directly via Metav Werkzeuge or consult our specialists for application advice DV-100 Drill Vice by Vertex — 0–100 mm opening, compact 200 x 343 x 63 mm DV-100 is a robust drill vice designed for precise clamping in drilling and light machining tasks across workshops and toolrooms 0–100 mm clamping range Compact dimensions: 200 x 343 x 63 mm Mass 5.7 kg for stable clamping Suitable for standard drilling applications Consistent clamping for repeatable drilling results A stable clamping solution is essential when repeatability matters. The 0–100 mm clamping range provides flexibility for a broad span of workpiece sizes, while the vice's mass contributes to reduced vibration during cutting. For operations where positional accuracy affects part quality, this vice maintains alignment and helps to lower rework rates. The compact footprint permits use on bench-mounted drilling machines and integrates into busy production cells without consuming excessive space. Practical efficiency for workshop workflows Time saved at the machine translates into measurable productivity gains. The design focuses on straightforward setup and reliable hold, enabling faster part changeovers and consistent bit wear. By simplifying the clamping step, the vice supports smoother drilling cycles and helps shorten cycle times for small to medium series. The clear numeric opening range makes selection and planning easy when organising jobs or nesting fixtures for repetitive tasks. Engineered for everyday workshop use Built to suit general-purpose drilling operations, the vice is aimed at toolrooms, maintenance shops and production benches that demand dependable hardware rather than complex features. Its combination of compact footprint and steady mass supports both manual and semi-automated drilling tasks. For users who need a robust clamping partner without special attachments, this solution offers straightforward performance that integrates with existing workflows. How the specifications translate into benefits Dimensions of 200 x 343 x 63 mm indicate a moderate base that balances stability and bench space economy; the 5.7 kg mass further enhances steadiness under load. An opening of 0–100 mm corresponds to the maximum jaw separation, allowing accommodation of parts up to that width without auxiliary fixturing. These measurable characteristics make it straightforward to assess suitability for specific jigs, drill sizes and part profiles, avoiding surprises at the machine. Contact Metav Werkzeuge for tailored advice and to source the Vertex DV-100 drill vice for reliable 0–100 mm clamping, supplied from Emmerich with full product information and ordering support Technical Data Article number: DV-100 GTIN: 4061905089176 Manufacturer: Vertex Facts Opening: 0–100 mm Dimensions: 200 x 343 x 63 mm Mass: 5.7 kg ECLASS: 21020601 ETIM: EC002173 Special features Suitable for standard drilling applications Category: Vertex SKU: DV-100 FAQ What clamping range does the vice offer? The DV-100 drill vice by Vertex provides a 0–100 mm opening, which defines the maximum jaw separation for workpieces. Is the vice suitable for bench-mounted drilling machines? Yes, the vice's compact dimensions (200 x 343 x 63 mm) and 5.7 kg mass make it appropriate for bench-mounted drilling and small toolroom setups. Which types of workpieces can be held securely? The vice accommodates typical components used in drilling operations; its 0–100 mm range covers a wide variety of profiles used in maintenance and small-series production. Are technical codes like ECLASS or ETIM available for system integration? The product is listed with ECLASS 21020601 and ETIM EC002173, allowing straightforward referencing in parts and procurement systems. What identifiers should be used for ordering or inventory? Use SKU DV-100 or GTIN 4061905089176 when ordering or recording the item in inventory systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining fast setup, a 700 kgf clamping capacity and reliable repeatability, this mechanical bench vice delivers secure holding and consistent results for demanding workshop tasks. Order the vice directly via Metav Werkzeuge or consult our specialists for application advice. VQS-3 Bench vice with quick-adjust mechanism (Vertex) The VQS-3 is a mechanical bench vice designed for rapid clamping and general workshop use, featuring a fast-adjust function for efficient set-up and a wide jaw opening for versatile applications Quick-adjust mechanism for fast set-up 700 kgf clamping force for secure grip 0–85 mm jaw opening for versatile clamping Compact 7 kg mass for firm bench mounting Faster set-up saves production time The quick-adjust mechanism shortens changeover and reduces idle time by allowing the jaws to be positioned rapidly before final tightening. For serial tasks or mixed small-batch work, this functionality means fewer interruptions and higher throughput. Combined with the 700 kgf nominal clamping capacity, operators gain both speed and secure holding, which supports faster machining cycles and fewer reclamping steps. The result is a measurable improvement in operational efficiency without complex adjustments. Secure grip for varied components A wide 0–85 mm jaw opening covers a broad range of workpiece sizes while the high clamping force ensures parts remain immobilised during cutting, filing or assembly. The vice’s design emphasises consistent pressure distribution to reduce marring and maintain part geometry. This dependable gripping performance minimises rework and improves process stability, which is particularly relevant for production environments where consistency is essential. Precision where it matters The vice provides an accuracy of 0.01, offering repeatable positioning for setups that require tight tolerances. For users with limited metrology equipment, this level of repeatability helps to maintain alignment between operations and supports downstream quality control. Technical terms explained: the stated accuracy refers to the vice’s ability to return to the same clamped position repeatedly, thereby reducing variability between identical operations. Practical build for everyday workshop use Weighing 7 kg and with compact external dimensions, the unit balances portability with bench stability. The mechanical drive avoids electronic complexity, lowering maintenance needs and simplifying integration into established workflows. The robust yet compact construction makes it suitable for metalworking benches and general workshop stations where space is at a premium but reliable clamping is required. For specification clarifications or to request a tailored recommendation for the Vertex VQS-3 bench vice, contact Metav Werkzeuge in Emmerich — our consultants are available by email at info@metav-werkzeuge.com or by phone for a detailed discussion Technical data Article number: VQS-3 Manufacturer: Vertex Type: Mechanical vice EClass: 21020601 ETIM: EC002173 Core specifications Dimensions: 81 x 374 x 70 mm Weight: 7 kg Clamping force: 700 kgf Jaw opening: 0–85 mm Accuracy: 0.01 Special features Quick-adjust mechanism Suitable for bench mounting SKU: VQS-3 GTIN: 4061905084072 FAQ What is the maximum jaw opening of the vice? The jaw opening for the VQS-3 bench vice is 0–85 mm, allowing clamping of a wide range of workpiece sizes. How much clamping force does the unit provide? The vice delivers a clamping force of 700 kgf, providing secure holding for machining and assembly tasks with the Vertex VQS-3. Is the vice suitable for repetitive production work? Yes, the VQS-3 offers repeatable positioning with an accuracy of 0.01, supporting consistent results in repetitive workflows. How heavy is the vice and is it stable on a bench? With a weight of 7 kg, the vice balances portability and stability for firm bench mounting during typical workshop operations. What type of vice is this and who manufactures it? This is a mechanical bench vice manufactured by Vertex; it is listed under the model designation VQS-3 for workshop and light industrial use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of dependable clamping performance and a compact form factor for efficient setup and secure hold in workshop fixtures — order the component directly via Metav Werkzeuge or consult our specialists for precise application advice. Vertex 3417I T-slot Nut — 1" T-slot, 7/8-9" thread A T-slot nut designed as a single clamping element for machine tables and fixtures, enabling secure anchoring in standard 1" T-slots for general workshop and industrial applications. Fits 1" T-slots for standard machine tables 7/8-9" threaded connection for secure fastening Compact size 1-5/8 × 1-1/2 × 1 in Dependable clamping that reduces setup time The T-slot nut delivers a robust anchoring solution for routine fixturing tasks where repeatable, vibration-resistant clamping is required. With a standard 1" T-slot compatibility and a 7/8-9" thread, the design supports common clamping bolts and studs, simplifying inventory and setup. The geometry of the slot nut ensures reliable load transfer to the table, which translates into fewer re-tightening cycles and less downtime during batch runs. This rational advantage improves throughput without compromising the quality of the hold. Compact form and practical handling for busy shops The component’s compact dimensions (1-5/8 × 1-1/2 × 1 in) keep the footprint minimal on crowded fixtures while still providing sufficient bearing area. Weighing 0.21 kg, the part is easy to handle during assembly and positioning yet substantial enough to stay put under normal machining loads. The single-unit supply means one piece is delivered per order item, providing flexibility for small repairs or selective replacement without bulk buying. For engineers planning fixture layouts, the modest size permits denser clamping patterns and greater access for tools. Clear compatibility and straightforward integration Designed for integration into standard clamping systems, this slot nut suits a wide range of table profiles used in milling, drilling and general-purpose machining. The 7/8-9" thread is compatible with common fastening hardware, reducing the need for adaptors. The simple shape and standardised dimensions help ensure predictable behaviour when combined with clamping bolts and studs, so planning forces and clearances becomes more straightforward. This practical compatibility supports efficient workflows in both production and maintenance environments. A reliable component from an established supplier As part of Vertex’s offering, the element benefits from established manufacturing practices that focus on fit and repeatability. Choosing standardised clamping components reduces procurement complexity and supports consistent assembly processes across multiple machines. The compact, standardised nature of this slot nut contributes to more predictable fixture performance, which in turn supports quality control and process stability in everyday operations. Contact Metav Werkzeuge in Emmerich for tailored application advice and reliable supply of Vertex components — email info@metav-werkzeuge.com, call +49 2822 7131930 or message via WhatsApp +49 170 2837271 for specific compatibility information Technical data SKU: 3417I GTIN: 4061905090226 ECLASS: 21029107 Dimensions: 1-5/8 × 1-1/2 × 1 in Thread: 7/8-9" T-slot size: 1" Weight: 0.21 kg Supplied as: single unit Facts Weight: 0.21 kg Thread: 7/8-9" T-slot size: 1" Dimensions (L × W × H): 1-5/8 × 1-1/2 × 1 in Special features Compatible with standard 1" T-slots Supplied individually for selective replacement Designed for machine table clamping FAQ What T-slot size does this nut fit? This slot nut is designed for a 1" T-slot, making it suitable for standard machine tables and fixtures that accept that profile. Which thread specification is provided on the nut? The component features a 7/8-9" thread, compatible with commonly used clamping bolts and studs for secure fastening. Is the item supplied as a set or single piece? The product is supplied individually, allowing targeted replacement or addition to existing fixture inventories. Can this T-slot nut be used in milling and drilling fixtures? Yes — the nut’s standard dimensions and thread make it suitable for general milling, drilling and fixture applications requiring reliable clamping. Who manufactures this component and what is the SKU? The part is manufactured by Vertex; the SKU is 3417I, and it is intended for use as a clamping insert in machine tables. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of a standard 1" T-slot fit, a secure 3/4-10" threaded connection and compact design for dependable fixture assembly. Order the component directly via Metav Werkzeuge or contact our consultants for compatibility advice. T-slot nut (single) – 3/4-10" thread, 1" T-slot compatible by Vertex A single T-slot nut designed for secure clamping in standard 1" T-slots, suitable for use in workshop and industrial fixturing applications. Single T-slot profile for standard 1" T-slots Threaded 3/4-10" for secure mounting Compact weight 0.2 kg eases handling SKU 3436I for simple reordering Reliable, repeatable clamping for everyday setups The compact T-slot nut offers a practical solution where repeatability and straightforward assembly are priorities. Its standard 1" T-slot geometry ensures compatibility with common machine tables and fixture rails, reducing setup time and simplifying inventory. The short, robust profile is intended to deliver consistent alignment when used with appropriately sized studs or bolts, which supports predictable clamping behaviour across repeated operations. This efficiency contributes directly to reduced downtime and smoother production workflows. Secure fixing through a recognised thread standard A defined 3/4-10" thread provides a familiar and reliable interface for fastening components into machine tables and clamping systems. Using an established thread form minimises uncertainty when selecting mating hardware and helps maintain clamping integrity under load. For assemblies where secure mounting is essential, the combination of a close-fitting T-slot body and a standard thread reduces play and ensures a tight connection between workpiece, fixture and table. Where precise torque or load ratings are required, the fastener should be combined with appropriate washers and correctly sized studs. Small footprint that keeps tooling agile With overall dimensions of 1-5/8 x 1-3/4 x 1" and a mass of 0.2 kg, this unit occupies minimal space in storage and on the table while remaining easy to handle during frequent changeovers. The compact form supports denser fixture layouts and can help lower the inventory footprint for spares. Reduced weight and a concise profile also make positioning quicker and less fatiguing for workshop personnel, which can improve throughput in high-mix environments where multiple clamping elements are exchanged frequently. Integration into workshop supply chains The item is supplied as a single unit and is identified as SKU 3436I, facilitating fast reordering and stock control. Using standard dimensions and thread forms allows straightforward procurement of complementary parts and replacement hardware. Metav Werkzeuge's distribution model aims to provide reliable availability and consistent product quality for shops and industrial buyers; the presence of clear labelling and standard specifications simplifies stock-keeping and reduces the risk of misorders. For applications requiring further technical detail, matching studs or full clamping kits can be specified to suit the intended assembly. For secure sourcing of Vertex components such as this single T-slot nut, contact Metav Werkzeuge for availability and delivery options — info@metav-werkzeuge.com or call +49 2822 7131930; our advisors will confirm fit and lead time Technical data Article number: 3436I GTIN: 4061905088483 Brand: Vertex Dimensions: 1-5/8 x 1-3/4 x 1" Thread: 3/4-10" Weight: 0.2 kg Designation: T-slot Unit type: single eClass: 21029107 T-slot width: 1" FAQ What T-slot size does this nut fit? The component is specified for a 1" T-slot and is intended for use with tables and rails that accept that slot dimension. Which thread is required for mating hardware? The fastening interface is 3/4-10", so studs, bolts and other mating parts should match that thread specification for correct engagement. Is this supplied as a single unit or in packs? The item is listed as a single unit, referenced by SKU 3436I for straightforward reordering. What information is needed to confirm suitability for a fixture? Confirm the table T-slot width (1"), the desired stud diameter and thread (3/4-10"), and any clearance requirements; the T-slot nut will then be matched to the assembly constraints. Can the load capacity be provided for design calculations? No specific load rating is supplied with the item; load capacity depends on the clamping assembly, the selected stud and installation practice—these must be calculated for each application. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, industry‑grade clamping solution that combines precise compatibility with standard T‑slot dimensions and a reliable 1‑8" threaded bore for secure fastening; order directly via Metav Werkzeuge or consult our technical advisers for fitment and availability. T‑slot nut 3418I — single T‑slot clamping component, 1‑8" thread, fits 1‑1/16" slot (Vertex) The T‑slot nut 3418I is a single clamping insert designed for seating in a 1‑1/16" T‑slot, providing a straightforward fastening point for fixtures and workholding in machine tables and modular fixturing systems. Fits 1-1/16" T-slot 1-8" standard threaded bore Compact 1-5/8x2x1-1/2" profile Supplied as single item Consistent clamping where measurement and position matter The compact design delivers a predictable anchoring point for fixtures and tooling, promoting reproducible set‑ups and reduced downtime. With a 1‑8" threaded bore matching common bolt standards, the component permits direct use of standard fasteners, which simplifies procurement and speeds assembly. The modest weight of 0.25 kg minimises inertial effects during handling while keeping the part robust enough for frequent re‑positioning in a production environment. Integrates quickly into existing tables and fixtures Designed to match a 1‑1/16" T‑slot, the unit slides into standard slot profiles and locks in place with a threaded fastener, enabling immediate use without adapter pieces. The compact external profile (1‑5/8 x 2 x 1‑1/2") ensures compatibility with tight spacing on machine tables and modular fixtures. This straightforward integration reduces set‑up time and supports lean workshop workflows by enabling fast changeovers and flexible fixturing strategies. Precision, repeatability and practical benefits By providing a stable threaded anchor within the slot, the component contributes to repeatable clamping forces and consistent part positioning. The standardised thread interface reduces variability across batches of fasteners and tooling plates, supporting quality control routines and traceable assembly. Where tight tolerances and repeatable setups are required, this component acts as a simple but effective element of the overall process control chain. Supply confidence and partner support for production Sourced from Vertex, the part benefits from established manufacturing practices and a clear parts identity for procurement and stock management. Metav Werkzeuge complements this with European warehousing and logistics, reducing lead times and acting as a quality filter for workshop purchases. The relationship combines industrial reliability with practical supply assurances, which is particularly valuable for small and medium‑sized shops that require dependable, repeatable components without complex procurement steps. Contact Metav Werkzeuge for availability and technical guidance on integrating the T‑slot nut 3418I into existing fixtures — phone +49 2822 7131930 or email info@metav-werkzeuge.com for prompt advice and delivery options. Technical data SKU: 3418I GTIN: 4061905090059 Brand: Vertex Facts Dimensions: 1‑5/8 x 2 x 1‑1/2" T‑slot nominal fit: 1‑1/16" Thread: 1‑8" Weight: 0.25 kg Special features Designation: T‑slot nut Supplied: single item eClass: 21029107 FAQ What T‑slot size does this component fit? The T‑slot nut 3418I is specified for a 1‑1/16" T‑slot and is shaped to seat securely in that slot profile. Which thread standard is used for fastening? The part uses a 1‑8" threaded bore, compatible with standard imperial fasteners commonly used in workshop fixturing. Is the T‑slot nut 3418I suitable for modular fixturing plates? Yes, the Vertex T‑slot nut 3418I is intended for use in modular fixturing and machine table applications where a standard T‑slot anchor is required. How is the product supplied and identified for ordering? The component is supplied as a single item and can be ordered under SKU 3418I; Vertex is listed as the manufacturer for procurement and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a precision fit for 1‑1/16" T‑slots combined with a standard 3/4‑10 thread and compact dimensions for straightforward integration into existing clamping systems; order via Metav Werkzeuge or consult our specialists for application advice. T‑slot nut 3446I — compact 1‑1/16" insert with 3/4‑10 thread (Vertex) T‑slot nut 3446I is a compact clamping insert for machine tables and profile systems, designed to secure fixtures in a 1‑1/16" T‑slot while accepting a 3/4‑10 threaded fastener. Precision fit for 1‑1/16" T‑slots 3/4‑10 threaded fastening Compact dimensions 1‑5/8 x 2 x 1‑1/2" Consistent clamping performance for production environments The T‑slot nut is engineered to provide a reliable mechanical interface between a threaded fastener and the machine table or profile. With a designated 1‑1/16" slot size and a 3/4‑10 thread, this insert simplifies fixture assembly and reduces the time spent aligning clamps and bolts. The standardised thread ensures compatibility with common clamping hardware, while the accurate external geometry supports repeatable positioning. Such predictability preserves cycle times and contributes to a smoother production flow in workshop and industrial settings. Space-saving design that integrates easily into existing setups Compact dimensions of 1‑5/8 x 2 x 1‑1/2" and a low weight (0.23 kg) make the component suitable for confined fixture arrangements where clearance is limited. The short profile allows the insert to sit flush in the slot, reducing interference with tooling or workpieces. Because the element is made to industry norms, retrofitting into existing tables and modular frames is straightforward; the compact footprint often enables denser clamping layouts without sacrificing accessibility for adjustments or torqueing. Practical guidance and explanation for non-specialists For those less familiar with clamping technology: a T‑slot nut converts the T‑slot channel into a secure anchor point for bolts and threaded studs. The combination of a precisely matched slot width (1‑1/16") and a matched internal thread (3/4‑10) prevents lateral play and distributes clamping forces effectively. When selecting a fastener, ensure the bolt length and head style are appropriate for the intended clamp and that tightening torque is applied within recommended limits for the clamping assembly to avoid overloading smaller components. Typical applications and integration notes The insert is well suited to jigs, fixtures, milling tables and assembly benches where a compact, standardised anchoring point is required. Its specification supports repeatable setups in batch production and flexible fixturing in maintenance or prototyping environments. Where material data is required for specific corrosion or temperature considerations, refer to the component documentation; mechanical compatibility with the stated slot and thread sizes remains the primary determinant of fit and function for most installations. For fast, reliable ordering and expert application advice on Vertex clamping components, contact Metav Werkzeuge—our team can confirm suitability for specific fixtures and provide ordering details via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 3446I GTIN: 4061905091049 Manufacturer: Vertex Core technical data T‑slot size: 1‑1/16" Thread: 3/4‑10" Dimensions: 1‑5/8 x 2 x 1‑1/2" Weight: 0.23 kg Special features Configuration: single Product type: T‑slot nut Category: Vertex FAQ Is this insert compatible with a 1‑1/16" T‑slot? Yes. The T‑slot nut 3446I is specified for use in a 1‑1/16" T‑slot and provides a precision fit for standard table channels. What thread size does the nut accept? The component accepts a 3/4‑10 threaded fastener, making it compatible with common clamping bolts and studs that match this thread. Can this T‑slot nut be used on milling machine tables and modular profiles? Yes. The 3446I is designed for machine tables and profile systems where the stated slot and thread sizes are present. What are the physical dimensions and mass? Dimensions are 1‑5/8 x 2 x 1‑1/2", and the weight is 0.23 kg, making the insert compact and suitable for tight clamping arrangements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable performance is delivered by the combination of a standard 5/8-11" thread, compact dimensions of 1-1/16 x 1-5/8" and a low mass of 0.128 kg, promoting quick, stable connections in confined assemblies. Order the coupling directly via Metav Werkzeuge or consult our advisors for application support. Coupling 2615I — 5/8-11" thread, compact 1-1/16 x 1-5/8" by Vertex The Coupling 2615I is a compact threaded coupling designed for secure mechanical connections in workshop and clamping assemblies, optimised for tight installation spaces where a standard thread interface is required Standard 5/8-11" thread for secure connections Compact 1-1/16 x 1-5/8" dimensions for tight spaces Lightweight design at 0.128 kg for easy handling Consistent thread engagement reduces rework and downtime The use of a 5/8-11" thread ensures compatibility with commonly specified fittings and adapters, providing a repeatable mechanical interface. A standard thread form simplifies inventory and tooling choices, while consistent engagement minimises the risk of loose connections under routine loads. Where quick interchangeability and reliable torque transfer are required, the standardised thread reduces assembly time and helps maintain production flow. The focus on a dependable threaded interface supports efficient maintenance cycles and predictable performance in workshop environments. Space-saving design that simplifies integration With compact dimensions of 1-1/16 x 1-5/8", the component is designed to fit into constrained assemblies without compromising connection security. The reduced overall envelope helps when routing, clamping or aligning multiple parts in close proximity, so integration into jigs and fixtures is straightforward. The compact form factor also aids in reducing obstruction of neighbouring components, making the part suitable for retrofits and designs where space is at a premium. This physical profile supports streamlined assembly processes and cleaner mechanical layouts. Low mass for faster handling and reduced effort At 0.128 kg, the low mass of the coupling aids in manual handling, rapid replacement and lower inertia during assembly operations. A lightweight component reduces the effort required for repetitive installation tasks, contributing to faster changeovers and reduced fatigue in workshop workflows. The modest weight also supports compact storage and efficient logistics within a tooling set, helping to keep workstation organisation clear and adaptable to varying operational demands. For specified threaded coupling requirements choose the Vertex coupling 2615I — contact Metav Werkzeuge in Emmerich for tailored technical advice via info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 2615I GTIN: 4061905088797 Thread: 5/8-11" Dimensions: 1-1/16 x 1-5/8" Weight: 0.128 kg Core data SKU: 2615I eClass: 21131711 ETIM: EC001959 Special features Manufacturer: Vertex Category: Vertex FAQ What thread standard does the coupling use? The coupling 2615I uses a standard 5/8-11" thread suitable for fittings and adapters that follow the same thread form. What are the external dimensions of the component? Dimensions are 1-1/16 x 1-5/8", specified for the Coupling 2615I to aid installation in confined assemblies. Is the coupling suitable for tight installation spaces? Yes, the compact geometry of the 2615I is intended for integration where space is limited while preserving a secure mechanical connection. How much does the coupling weigh? The Coupling 2615I has a mass of 0.128 kg, which supports easier handling and quick replacement operations. Which classifications and identifiers apply to this part? This component is listed under eClass 21131711 and ETIM EC001959 and carries GTIN 4061905088797 for identification in procurement and logistics. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a compact, reliable T-slot solution combining a 7/8" T-slot fit, a 3/4-10" threaded interface and a space-saving 1-1/2 x 1-1/2 x 1" profile; order the part directly via Metav Werkzeuge or ask our consultants for application advice. Vertex 3426I T-slot nut — compact single unit with 3/4-10" thread and 7/8" T-slot compatibility The Vertex 3426I is a single T-slot nut designed for secure clamping in machine tables and fixture assemblies, delivering straightforward integration where standard T-slot widths are used. Compatible with 7/8" T-slot tracks 3/4-10" threaded connection Compact 1-1/2 x 1-1/2 x 1" profile Reliable clamping for consistent machining results The 3426I delivers secure clamping through its matched thread and T-slot geometry, reducing movement and vibration during machining. The combination of a standard 3/4-10" thread and a 7/8" T-slot fit enables compatibility with many workholding systems, which supports consistent part quality and repeatable setup. For operations where fixture stability affects cycle times, this component helps maintain process reliability and reduces rework. Easy integration into existing fixtures and tooling Designed as a single unit for direct insertion into standard T-slots, the component simplifies retrofitting and layout changes. The specified dimensions (1-1/2 x 1-1/2 x 1") make it straightforward to calculate spacing and clearances in fixture design, while the threaded interface provides reliable engagement with clamping bolts. This plug-and-play characteristic shortens setup planning and supports efficient machine changeovers without complex adapters. Compact form and handling that speeds up assembly With a low mass, the unit is easy to handle during setup and maintenance, contributing to faster assembly times at the workbench. The compact profile keeps the clamping footprint minimal, permitting closer placement of clamping points when space is constrained. Technical images and a detailed drawing are provided for precise planning and verification of clearances before installation, helping to avoid costly trial-and-error on the shop floor. Choose the Vertex 3426I for dependable T-slot clamping and contact Metav Werkzeuge in Emmerich for purchasing advice and reliable delivery Technical Data SKU: 3426I GTIN: 4061905089206 Article designation: T-slot Variant: single Dimensions: 1-1/2 x 1-1/2 x 1" T-slot width: 7/8" Thread: 3/4-10" Weight: 0.175 kg ECLASS: 21029107 Manufacturer: Vertex Core specifications Dimensions (mm/inch): 1-1/2 x 1-1/2 x 1" T-slot compatibility: 7/8" Thread form: 3/4-10" Weight: 0.175 kg GTIN: 4061905089206 Special features Single-piece T-slot nut Includes technical drawing image Detail image available for inspection Category: Vertex FAQ What T-slot width does this nut fit? The nut fits a 7/8" T-slot, designed to engage securely with corresponding table or fixture slots. Which thread size is used for clamping bolts? A 3/4-10" thread is provided for bolt engagement, allowing standard clamping hardware to be used with the Vertex 3426I. What are the external dimensions for fixture planning? External dimensions are 1-1/2 x 1-1/2 x 1", useful for spacing clamps and calculating clearances in the fixture layout. Is a drawing available to verify fit before installation? A technical drawing and a detailed product image are available to confirm clearances and ensure correct integration into the workholding setup. What is the product weight for handling considerations? The unit weighs 0.175 kg, which supports easy handling during setup and reduces cumulative mass in larger fixture arrays. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise table fastening thanks to the combination of a compact footprint, standardised 3/4-10" threading and compatibility with a 13/16" T-slot. Order this fastening component directly via Metav Werkzeuge or consult our specialists for application advice. Vertex 3416I T-slot nut, single — 13/16" slot, 3/4-10" thread Vertex 3416I is a single T-slot nut engineered for secure clamping on machine and assembly tables, designed to engage a 13/16" T-slot and accept 3/4-10" threaded fastenings. Fits 13/16" T-slots 3/4-10" threaded connection Compact dimensions 1-1/4 x 1-1/2 x 1" Single-piece design, SKU 3416I Secure clamping with a small footprint The T-slot fastening offers a reliable way to fix workpieces and fixtures without modifying the table surface. With compact dimensions of 1-1/4 x 1-1/2 x 1", the component minimises obstruction on the table while providing a stable bearing surface. The integrated 3/4-10" thread is compatible with common imperial studs and bolts, enabling straightforward assembly into existing setups. This results in reduced setup time and consistent clamping pressure, which supports efficient cycle times and predictable fixture behaviour. Engineered for compatibility and quick installation Designed to engage a 13/16" T-slot, the part aligns easily in standard machine table grooves and can be positioned rapidly along the slot. The single-piece format simplifies handling and eliminates extra assembly steps, offering a pragmatic solution for repetitive fixturing tasks. The SKU 3416I denotes a ready-to-use unit that integrates with standard clamping kits and accessories, helping to standardise tooling across a workshop and reduce inventory complexity. Durable handling that supports workshop workflow At a weight of 0.142 kg, the component balances low mass with practical handling for frequent adjustments and reconfiguration. The single-piece construction reduces the risk of lost parts and streamlines maintenance routines, contributing to uninterrupted production. By combining a modest footprint with standardised threading and slot compatibility, the item enhances setup flexibility and supports a dependable production flow in metalworking and general workshop environments. For dependable table fastenings, request the Vertex 3416I through Metav Werkzeuge — our consultants at Metav are available to assess suitability and advise on integration with existing clamps and fixtures Technical Data Article number: 3416I GTIN: 4061905088773 Brand: Vertex Facts Weight: 0.142 kg Dimensions: 1-1/4 x 1-1/2 x 1" T-slot width: 13/16" Thread: 3/4-10" Special features Single-piece design (einzelnd) Intended for machine/assembly table T-slot use Compact form factor FAQ What T-slot width does this nut fit? The Vertex 3416I T-slot nut is designed to fit a 13/16" T-slot for secure engagement on compatible machine tables. Which thread standard is provided on the nut? The component accepts a 3/4-10" threaded fastener, enabling the use of common imperial studs and bolts with the Vertex 3416I. Can this part be used with existing clamping kits? The compact Vertex 3416I unit and its standardised 3/4-10" thread make it suitable for integration with most clamping kits that accommodate a 13/16" T-slot. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, single-piece design that fits standard 13/16" T-slots and secures fixtures with a 5/8-11" thread; order the component directly via Metav Werkzeuge or contact our consultants for specification advice. Vertex T-nut »3435I« – single, for 13/16" T-slots with 5/8-11" thread Vertex T-nut »3435I« is a single-piece T-slot fastening element intended for secure clamping on machine tables and fixture systems; designed for standard 13/16" T-slots and supplied with a 5/8-11" threaded connection. Fits 13/16" T-slots 5/8-11" thread connection Single-piece design for stability Compact dimensions 1-1/4 x 1-1/2 x 1" Secure and standardised clamping for workshop fixtures This component provides a reliable interface between clamping hardware and the machine table by matching the 13/16" T-slot standard and delivering a 5/8-11" fastening thread. The exact match to common table profiles reduces lateral play and simplifies setup, while the standard thread means adoption with widely available studs and clamping bolts. The precise dimensions support repeatable positioning and a consistent clamping interface for jigs and fixtures. Compact form that speeds set-up and handling With compact external measurements of 1-1/4 x 1-1/2 x 1" and a net weight of 0.142 kg, the T-slot nut allows faster handling during assembly and reconfiguration of workholding. The low mass eases manual positioning and reduces the inertia involved in indexing fixtures, which contributes to shorter changeover times. The single-piece delivery format simplifies inventory management and removes ambiguity at installation. Procurement-ready specification and traceability The product is supplied as SKU 3435I and can be identified by GTIN 4061905088032, enabling straightforward procurement and stock control. The single-item configuration supports modular planning for fixture sets and ensures a repeatable supply unit for production environments. Manufacturer traceability under the Vertex brand facilitates quality checks and documentation for compliance in professional workshops. Contact Metav Werkzeuge in Emmerich for tailored advice on integration, quoting SKU 3435I or for assistance with compatible clamping hardware via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 3435I GTIN: 4061905088032 Manufacturer: Vertex Facts Weight: 0.142 kg Dimensions: 1-1/4 x 1-1/2 x 1" T-slot size: 13/16" Thread: 5/8-11" Special features Single-piece delivery Intended for standard machine T-slots ECLASS: 21029107 FAQ Which T-slot size does this component fit? The T-nut is designed for a 13/16" T-slot profile and aligns with common machine table standards. What thread does the fastening use? The component uses a 5/8-11" threaded connection for engagement with standard clamping studs. Is the item supplied individually or in sets? The part is supplied as a single-piece unit, sold under SKU 3435I. What are the external dimensions and weight? External dimensions are 1-1/4 x 1-1/2 x 1" and the weight is 0.142 kg. How can this part be referenced for ordering and inventory? Reference Vertex SKU 3435I or GTIN 4061905088032 when ordering or recording the component. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, workshop-ready fastening solution that pairs precision fit with straightforward installation: the combination of a 3/4" T-slot form, a standard 5/8-11" threaded connection and lightweight construction supports efficient fixturing and flexible inventory planning. Order the component directly via Metav Werkzeuge or ask the consultants for technical advice. Vertex T-Nute – T-slot nut with 3/4" T-profile and 5/8-11" thread The T-Nute is a compact T-slot nut designed to secure clamping elements and fixtures in 3/4" T-slots for general workshop and light industrial fixturing applications Designed for 3/4" T-slots 5/8-11" thread for secure fastening Compact 1-1/4" x 1-1/4" profile Lightweight at 0.102 kg Secure, standardised clamping for consistent results Engineered for repeatable positioning and secure hold, this T-slot fastening component mates with a 3/4" T-slot and accepts a 5/8-11" thread, providing a familiar interface for common clamping hardware. The standardised thread size ensures compatibility with widely used studs and bolts, reducing the need for special adapters and simplifying procurement. The precise geometry reduces lateral play in the slot, which improves clamping stability and contributes to predictable machining or assembly outcomes. This makes it suitable for jigs, holding fixtures and modular workholding systems where consistent component location is critical. Space-efficient form that keeps setups compact With nominal dimensions of 1-1/4" x 1-1/4" x 3/4", the fastener is designed to occupy minimal slot space while still delivering reliable clamping force. The compact footprint helps maintain close centre distances between fixtures and allows multiple fasteners to be placed in confined setups without introducing unnecessary bulk. The 0.102 kg mass supports easy manual handling during setup changes and keeps additional load on movable fixtures low. For workshops prioritising efficient use of plate area and rapid reconfiguration, the small form factor is an operational advantage. Simple integration for smoother workflow and stock management Compatibility with standard T-slot dimensions and a conventional threaded connection facilitates rapid integration into existing fixturing strategies; the component requires no bespoke machining to accept standard studs or bolts. The item is listed with SKU 3425I and GTIN 4061905087042 for straightforward ordering and inventory control. For procurement teams, this clarity in identification aids stock rotation and reduces administrative uncertainty. Visual aids such as a technical drawing and detailed images are available to support inspection and verification before installation, supporting efficient planning and reduced downtime. For dependable workshop fixturing, request availability and delivery through Metav Werkzeuge in Emmerich; technical enquiries can be directed to info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical Data Article number: 3425I GTIN: 4061905087042 Brand: Vertex Facts Weight: 0.102 kg Dimensions: 1-1/4" x 1-1/4" x 3/4" T-slot size: 3/4" Thread: 5/8-11" Special features Designation: T-Nute (T-slot nut) Packaging: single item Category: Vertex Image types: technical drawing, main view, detail view FAQ What slot size does this T-slot nut fit? The component fits a 3/4" T-slot; the specification is listed as a 3/4" T-slot form in the product data. Which threaded fasteners are compatible with the nut? Compatibility is provided via the standard 5/8-11" thread, which accepts common studs and bolts used in workshop fixturing. Is the product supplied individually or in sets? The item is supplied as a single piece, indicated in the product designation as a single unit. How can the item be ordered and identified for stock control? Order and inventory identification can use SKU 3425I and GTIN 4061905087042 for precise procurement and stock management. Are there visual resources to verify fit before purchase? Technical drawings and detailed images are available to support inspection and ensure correct fit in the intended T-slot configuration. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of a standard 3/4-10" threaded interface, a space-saving 1-1/4 x 1-7/8" profile and a low mass of 0.22 kg for reliable, easy-to-install connections on workshop machinery. Order the part directly via Metav Werkzeuge or consult our specialists for compatibility and delivery. Coupling 2616I — Threaded coupling with 3/4-10" interface by Vertex A Coupling 2616I designed for secure threaded connections in industrial fittings, offering a compact profile for installations with limited space. Threaded interface 3/4-10" for reliable connections Compact 1-1/4 x 1-7/8" profile for tight spaces Lightweight construction, 0.22 kg for easy handling Vertex quality, GTIN 4061905089213 Reliable threaded connection that matches standard fittings The design centres on a robust threaded interface specified as 3/4-10", which ensures mechanical compatibility with common imperial fittings and connectors used in workshop and machine environments. By using an established thread dimension, the component minimises the need for adapters and reduces downtime during installation. The precise thread form contributes to consistent engagement and torque transmission, supporting dependable mechanical joints in assemblies. Space-saving form with clear installation advantages With a compact 1-1/4 x 1-7/8" profile and a low mass of 0.22 kg, this coupling is engineered for applications where axial and radial clearance are limited. The reduced envelope allows straightforward placement close to other components, helping to maintain overall system compactness. Lower component mass also simplifies handling during assembly and decreases inertial load on moving subassemblies, which can benefit dynamic systems. Traceability and industrial sourcing for quality assurance Manufactured under the Vertex range and identified by SKU 2616I and GTIN 4061905089213, the item supports traceable procurement and stock management. Clear product identifiers simplify ordering and inventory control in industrial purchasing processes. Images and technical drawings are available to verify fit and orientation before installation, aiding quality control and reducing the risk of incorrect parts entering production. Practical benefits for workshop and machine integration The component is suitable where a compact, standard-thread connector is required for fluid, pneumatic or mechanical installations within workshops and light industrial equipment. The combination of a recognised thread size, small footprint and low weight delivers practical advantages for maintenance cycles and retrofits, enabling faster replacement and reduced handling effort while maintaining standardisation across assemblies. Contact Metav Werkzeuge for precise compatibility checks or to arrange supply of the Vertex coupling 2616I from our Emmerich warehouse Technical data SKU: 2616I Designation: Coupling Manufacturer: Vertex GTIN: 4061905089213 Facts Weight: 0.22 kg Thread: 3/4-10" Dimensions: 1-1/4 x 1-7/8" eClass: 21131711 Special features Category: Vertex Gallery images: 2612m-detail.jpg, 2612m-technische-zeichnung.jpg FAQ What thread size does this coupling use? The coupling features a 3/4-10" threaded interface, specified for compatibility with standard imperial fittings and connectors for industrial applications. What are the external dimensions and mass of the part? Dimensions are 1-1/4 x 1-7/8" and mass is 0.22 kg, allowing compact installation and easy handling in confined assemblies. Is material information available for this coupling? Material is not specified in the provided data set; further material details can be confirmed through Metav Werkzeuge or by consulting Vertex documentation for SKU 2616I. How is the part identified for ordering and stock management? The product is listed under SKU 2616I and GTIN 4061905089213, which supports unambiguous ordering and inventory control for procurement processes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable threaded performance combined with a compact installation footprint makes this coupling a pragmatic choice for consistent assembly work. The 7/8-9" threaded connection and 1-1/4×1-7/8" dimensions offer predictable compatibility and space-saving installation. Order the coupling directly via Metav Werkzeuge or ask our consultants if needed. Vertex Coupling 2617I — Threaded 7/8-9" connection, 1-1/4×1-7/8" compact design A coupling designed for secure mechanical and fluid connections in workshop and industrial fittings, optimised for installations requiring a small footprint and standard 7/8-9" thread compatibility. Threaded 7/8-9" standard compatibility Compact 1-1/4×1-7/8" footprint Robust Vertex manufacturing quality Suitable for standard industrial fittings Dependable threaded connection for secure assemblies The core advantage of this component is a reliable threaded connection that results from its standard 7/8-9" specification. This ensures repeatable mechanical engagement and predictable torque behaviour when mated with corresponding fittings. A standard thread form simplifies inventory planning, reduces assembly errors and supports fast installation cycles in production environments. The product’s design focuses on consistent performance rather than decorative features, supporting uninterrupted workflow and improved process reliability. Space-saving design for tight installations With overall dimensions of 1-1/4×1-7/8", the unit is engineered for situations where installation space is limited. The compact footprint enables close-coupled assemblies and easier routing of adjacent components without sacrificing mechanical stability. This characteristic is particularly useful in crowded machine rooms, control cabinets and assemblies where every millimetre of clearance counts. The combination of compact size and standard threading allows integration into existing setups with minimal layout changes. Compatibility across common industrial applications The coupling is suitable for use in a wide range of industrial applications that accept a 7/8-9" threaded interface, including mechanical linkages and standard fluid or pneumatic assemblies where such connections are specified. Its standardised form factor supports interoperability with many established components and reduces the need for bespoke adaptors. Clear identification of the specification simplifies procurement and ensures that the component can be matched reliably to mating parts during assembly planning. Practical integration and maintenance benefits Installation is straightforward when correct torque and sealing practices are applied, and the component can be integrated into existing maintenance routines without special tooling. Its standard thread means replacements are simple to source and stocking is predictable. Where sealing is required, conventional tape or jointing compounds for threaded connections can be used in accordance with system requirements. Images and technical drawings are supplied to assist with verification and to support assembly checks during routine inspection. Contact Metav Werkzeuge for specification advice on the Vertex coupling 2617I and receive tailored guidance from our consultants at the Emmerich quality hub Technical data Article number: 2617I GTIN: 4061905088490 Manufacturer: Vertex eClass: 21131711 Dimensions & thread Dimensions: 1-1/4x1-7/8" Thread: 7/8-9" Features Standard threaded connection Compact design for tight installations Technical drawing and detail images available FAQ What thread specification does this coupling use? The Vertex coupling 2617I features a 7/8-9" threaded connection compatible with fittings using the same specification. What are the external dimensions of the part? Dimensions are 1-1/4×1-7/8", providing a compact footprint for installations with limited space. Is the coupling suitable for standard industrial fittings? Yes, the Vertex coupling 2617I is designed for compatibility with standard industrial fittings that match the 7/8-9" thread. Are technical drawings and images available for planning? Technical drawing and detail images are supplied and can be used to verify fitment and support installation planning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the precise 1-8" thread, compact 1-5/8 x 2-1/2" footprint and low weight to streamline assembly and reduce handling time; order the part directly via Metav Werkzeuge or contact our consultants for application advice. Vertex 2618I Coupling — 1-8" thread, compact 1-5/8 x 2-1/2" dimensions A Vertex 2618I coupling engineered for secure mechanical connections in workshop and industrial assemblies. Precision-made Vertex coupling, SKU 2618I 1-8" threaded connection for secure fitting Compact dimensions 1-5/8 x 2-1/2" Lightweight 0.46 kg for easy handling Engineered for dependable mechanical connections The connector is built around a 1-8" thread, providing a consistent and repeatable method of joining components. The threaded interface ensures a secure mechanical link under routine loads and simplifies replacement or reconfiguration of assemblies. By relying on standardised thread geometry, downtime for refitting is minimised and assembly torque can be reproduced reliably. Compact form that saves space and simplifies handling With external dimensions of 1-5/8 x 2-1/2", the unit occupies minimal space in fixtures and jigs while still offering the mechanical robustness expected from industrial-grade components. The compact footprint reduces part interference in dense assemblies and makes storage and inventory management more efficient. At 0.46 kg, handling is straightforward during setup, which helps speed up workflow in production environments. Suited to workshop and industrial fittings Designed as a general mechanical coupling, the component supports a wide range of assembly tasks where a fixed threaded connection is required. Manufacturing tolerances and the choice of a standardised thread allow the coupling to integrate with existing parts and tools without extensive adaptation. The precision of the thread engagement contributes to stable torque transmission and consistent mechanical performance. Practical specification and inspection guidance Key numerical values are provided to aid planning: nominal thread size 1-8", external dimensions 1-5/8 x 2-1/2" and mass 0.46 kg. These figures assist in checking compatibility with mounting brackets, seals or adjacent components and in calculating handling requirements. Where material selection or surface finish is critical for a specific application, consult Metav Werkzeuge for further technical clarification and inspection protocols. Contact Metav Werkzeuge for procurement and technical guidance on the Vertex 2618I coupling — our Emmerich-based team will advise on suitability and delivery options. Technical data SKU: 2618I GTIN: 4061905091490 Manufacturer: Vertex Core dimensions Dimensions: 1-5/8 x 2-1/2" Thread: 1-8" Weight: 0.46 kg Features and identifiers Product type: Coupling ECLASS: 21131711 Brand: Vertex FAQ What thread size does this coupling use? The coupling uses a 1-8" thread as specified for reliable mechanical engagement. Are the external dimensions suitable for compact assemblies? Yes, the external dimensions are 1-5/8 x 2-1/2", making the part appropriate where space is limited. What is the weight of the unit? The coupling weighs 0.46 kg, which eases handling during installation. Is the product a Vertex component and how is it identified? The part is a Vertex coupling identified by SKU 2618I and GTIN 4061905091490. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of standardised thread form, compact dimensions and easy integration into modular clamping setups for reliable fixture assembly; order the part directly via Metav Werkzeuge or consult the Metav team for application advice. Vertex T-slot nut 3423I – 1/2" T-slot, 3/8-16" thread A Vertex T-slot nut 3423I supplied individually for secure clamping in 1/2" T-slot tables and modular fixture systems. Fits 1/2" T-slot tables 3/8-16" standard threaded bore Lightweight precision piece, 0.032 kg Supplied individually for flexible staging Secure, standardised clamping for modular tables The Vertex T-slot nut 3423I is designed to provide a dependable interface between clamping elements and machine tables that use 1/2" T-slots. Its 3/8-16" thread follows an established imperial standard, enabling compatibility with a wide range of studs and clamping components. By relying on standard thread geometry, the component reduces setup time and simplifies spare-part management across different fixtures. The compact form is optimised to sit flush in the slot while delivering repeatable clamping force when tightened. Compact dimensions that reduce mass and simplify handling With overall dimensions of 7/8 x 7/8 x 1/2" and a weight of 0.032 kg, this nut adds minimal mass to assemblies and is straightforward to position during setup. The small footprint supports dense fixture layouts and shortens repositioning time when rearranging work-holding configurations. The modest mass also limits inertial loads on lightweight fixtures, helping to preserve table accuracy during dynamic operations. For operations where fast changeovers and low added mass matter, the compact design supports efficient workflows. Standard thread and single-piece supply for flexible inventory The 3/8-16" thread offers broad interoperability with common studs and bolts used in clamping technology, allowing straightforward replacement or retrofitting without special fasteners. Supplied individually, the item is suited to bespoke retrofit projects and small-batch fixtures where precise quantities are required. The straightforward geometry and single-piece supply model help to minimise overstock while maintaining ready access to the necessary clamping elements for prototypes or small production runs. Contact Metav Werkzeuge in Emmerich for application guidance and to secure the Vertex T-slot nut 3423I for modular clamping systems—Metav Werkzeuge provides tailored advice and fast dispatch from its Emmerich quality hub (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: 3423I GTIN: 4061905093234 Brand: Vertex Facts Dimensions: 7/8 x 7/8 x 1/2" Thread: 3/8-16" T-slot size: 1/2" Weight: 0.032 kg Supplied: single Special features Application: T-slot clamping systems ECLASS: 21029107 Packaging: individual piece FAQ What T-slot size is this nut made for? The nut is sized for a 1/2" T-slot, suitable for tables and fixtures that accept that slot width. Which thread standard does the component use? This item uses a 3/8-16" threaded bore, following a common imperial thread standard for clamping hardware. Is the product suitable for small-batch or prototype fixtures? Yes, the part is supplied individually, which makes it convenient for prototype builds and small-batch fixture assemblies. Can this nut be used with standard clamping studs and bolts? The 3/8-16" thread ensures compatibility with widely used studs and bolts in modular clamping systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of hard‑anodised aluminium construction, a precise fit for 36 mm table slots, and a supply format that supports continuous workshop use; order via Metav Werkzeuge or consult our advisers for application guidance. VST-36 Cover for Milling Table Slot — hard‑anodised aluminium, 1,000 mm The VST-36 is a slot cover designed to close and protect the milling/router table slot while maintaining a flush, serviceable surface for table operations. Hard‑anodised aluminium construction 1,000 mm length for extended coverage Designed for 36 mm slot width Supplied as a set of 5 pieces Protects the work area and reduces contamination The VST-36 functions as a robust slot cover that prevents chips and dust from accumulating in the milling table aperture. Manufactured from hard‑anodised aluminium, the component offers a corrosion‑resistant barrier that helps keep the work surface clean and reduces the frequency of machine maintenance. The combination of a precise profile and durable surface treatment supports a stable working environment and contributes to consistent machining results. Simple fitting with a precise profile for safety With a 1,000 mm length and a 13 mm profile height, the cover is sized for continuous coverage of standard table openings; the part is intended for a 36 mm slot width and is supplied in a set of five for larger tables or multiple stations. Its low weight (1.1 kg) facilitates handling during installation. The engineered geometry ensures a precise fit, which reduces lateral play and minimises the risk of tool interference, supporting safe operation at common workshop settings. Long service life and low maintenance demands The hard‑anodised surface treatment increases resistance to wear and mild chemical exposure, making the insert suitable for intensive workshop use. The surface is straightforward to clean and resists scratching under normal handling, which lowers lifecycle costs and extends intervals between replacements. This durability translates into fewer interruptions on the shop floor and improved overall equipment effectiveness. Practical supply format for workshop planning Supplied as a set, the covers enable systematic replacement and alignment across a table or several benches, simplifying inventory management for production and maintenance teams. The combination of a lightweight construction, corrosion resistance, and standard dimensions supports retrofitting and modular workstation layouts, enabling planners to standardise on a reliable cover solution for milling and routing operations. For reliable workshop protection and fast supply from Emmerich, secure the Vertex VST-36 through Metav Werkzeuge or consult our advisers for tailored application guidance Technical data SKU: VST-36 GTIN: 4061905094620 Brand: Vertex Material: hard‑anodised aluminium Length: 1,000 mm Height: 13 mm Weight: 1.1 kg Supplied per set: 5 pieces Suitable for slot width: 36 mm Facts Length: 1,000 mm Height: 13 mm Weight: 1.1 kg Supplied per set: 5 pieces GTIN: 4061905094620 Special features Hard‑anodised aluminium Designed for milling/router table slots Suitable for 36 mm slot width Supplied as set of five covers SKU VST-36 FAQ What slot width does this cover fit? The VST-36 is designed specifically for a 36 mm slot width and provides a precise fit for standard milling table slots. Can the cover be shortened to fit custom table lengths? Yes, the cover’s aluminium construction allows for safe trimming to a required length; care must be taken to maintain the edge finish and profile for proper seating. Is the surface resistant to corrosion and wear? The hard‑anodised aluminium finish gives the cover enhanced corrosion resistance and improved surface hardness for prolonged service life. How is the product supplied for larger workshops? The product is supplied as a set of five pieces (SKU VST-36), enabling coverage of extended table lengths or multiple benches. Is the component suitable for router tables as well as milling tables? Yes, the design is intended for both milling and router table slots where a 36 mm slot cover is required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a low‑profile, corrosion‑resistant cover that fits standard router table slots and comes as a practical set of 5. The combination of a commercially anodised aluminium finish, a precise fit for 24 mm slots and a full‑length 1,000 mm span supports safe, tidy workshop workflows — order directly via Metav Werkzeuge or contact our consultants for assistance. VST-24 Cover for Router Table Slot — 1,000 mm anodised aluminium, set of 5 | Vertex The VST-24 is a durable cover designed to close the slot in a router or milling table, providing a neat, low‑profile barrier for standard woodworking and joinery applications. Set of 5 covers for router tables Fits standard 24 mm slot width Length 1,000 mm for full-span coverage Commercially anodised aluminium finish Better safety and cleaner working surfaces with a low profile A continuous slot cover reduces the exposed opening along a router table, helping to limit dust ingress and to lower the risk of accidental contact with the cutter. The slender 14 mm profile maintains adequate clearance for typical workpieces while keeping the table surface level; this design is particularly useful where repeated set‑ups or narrow stock are processed. The result is a tidier workspace and fewer interruptions for cleaning or minor adjustments. Robust, lightweight construction for routine workshop demands Made from commercially anodised aluminium, the cover combines corrosion resistance with modest weight, making handling and installation straightforward. The overall mass of the set keeps transport and repositioning easy, while the metal finish endures common workshop conditions better than untreated materials. Supplying the part as a set of 5 ensures replacements or multiple bench installations can be completed swiftly, contributing to uninterrupted production flow. Straightforward integration with common router tables Specifically intended for the standard 24 mm slot width, the component offers a consistent, repeatable fit across compatible tables and reduces the need for bespoke solutions. The 1,000 mm length covers a substantial span of the table without multiple joins, promoting a uniform work surface and improving material support along the cutter line. Identified by SKU VST-24, the item is suitable for professional and workshop environments seeking a reliable slot covering solution. For reliable router table slot coverage and a corrosion‑resistant finish, contact Metav Werkzeuge to discuss the Vertex VST-24 set and confirm compatibility with existing workshop equipment. Technical data Article number: VST-24 GTIN: 4061905093807 Manufacturer: Vertex Machinery Works Co., Ltd. Length: 1,000 mm Height: 14 mm Weight: 1.2 kg Slot compatibility: 24 mm Commercially anodised aluminium Supplied as set of 5 Intended for router table slot covering FAQ What slot width is the cover designed for? The cover is designed for a 24 mm slot width; the Vertex VST-24 fits tables with this standard slot dimension. What material is used and what are the benefits? Constructed from commercially anodised aluminium, the VST-24 offers improved corrosion resistance and a durable surface suited to workshop conditions. Is the product supplied individually or as multiple pieces? The item is supplied as a set of 5 covers, providing stock for several tables or spare parts for maintenance. What are the main dimensions to check before fitting? Key dimensions are a length of 1,000 mm and a height of 14 mm; confirming the table slot is 24 mm wide ensures compatibility Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a durable, anodised aluminium construction and a precise fit for 20 mm router table slots to keep the table surface flush and safe; the 1,000 mm length provides extended coverage while the supply as a set of 5 simplifies replacement cycles. Order the cover directly via Metav Werkzeuge or ask our consultants if needed. VST-20 — Router table slot cover, anodised aluminium, 1,000 mm A VST-20 cover designed to close router table slots, providing a low-profile, durable sealing solution for standard 20 mm slot widths. Hard-anodised aluminium construction 1,000 mm length for extended coverage Designed for 20 mm router table slots Supplied as a set of 5 pieces Precision protection for everyday workshop use The cover offers a flush finish that reduces the ingress of dust and debris into the table recess, improving workplace cleanliness and tool longevity. Manufactured from anodised aluminium, the component combines low weight with mechanical stability, enabling a consistent edge that minimises wobble at the cutter interface. This precision fit supports safer operations and reduces time spent on cleaning and minor adjustments, contributing to a more efficient production flow. Proven corrosion resistance and material benefits Anodising creates a durable oxide layer on the aluminium surface, delivering corrosion resistance and a harder wearing exterior compared with untreated metal. For workshop environments where chips and humidity are present, the treated surface maintains appearance and function with minimal maintenance. The combination of lightweight construction and surface protection reduces handling fatigue while ensuring long-term performance in demanding settings. Practical dimensions and installation advantages With a length of 1,000 mm and a profile height of 13.7 mm, the cover suits long-format router tables and can be cut to size where required. The design matches a 20 mm slot width and is supplied in a set of five, allowing replacement of multiple sections without reordering. Installation is straightforward: the low-profile geometry keeps the workpiece stable across the join, and the robust profile is compatible with common table setups used in cabinetmaking and joinery. For reliable, precision-tested covers from Vertex, contact Metav Werkzeuge to arrange supply and technical advice tailored to specific router table configurations. Technical data SKU: VST-20 GTIN: 4061905092336 Manufacturer: Vertex Length: 1,000 mm Height: 13.7 mm Weight: 1 kg Suitable slot width: 20 mm Material: anodised aluminium Supplied as a set of 5 pieces Intended for router table slot coverage FAQ What slot width does the cover fit? The cover is designed for a 20 mm slot width and delivers a precise fit for standard router table grooves. Can the cover be shortened to size? Sections can be cut to length to suit bespoke table dimensions; the set of five allows for multiple customised sections. How does the anodised surface help in the workshop? The anodised aluminium finish increases surface hardness and corrosion resistance, preserving the cover’s appearance and function under regular chip exposure. Is the product supplied in multiple pieces? The item is delivered as a set of five pieces, enabling immediate replacement across several table sections if required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of commercially anodised aluminium, a 1,000 mm length and a low 13.7 mm profile to improve workbench safety and keep cutter slots free from chips. The robust design is supplied as a set for straightforward replacement and steady workshop operation. Order directly via Metav Werkzeuge or contact our consultants for application advice. VST-22 Router table slot cover — anodised aluminium, 1,000 mm The VST-22 is a low-profile cover designed for router or milling table slots, delivering protection, a clean work surface and reliable compatibility with standard 22 mm slot widths. Commercially anodised aluminium construction 1,000 mm length for extended coverage Low-profile 13.7 mm height reduces obstruction Supplied as a set for convenient replacement Cleaner tables and protected cutters with an anodised finish The commercially anodised aluminium construction provides a hard-wearing surface that resists corrosion and abrasion, keeping the table top tidy and reducing the risk of surface staining. By covering the cutter slot, the strip prevents swarf accumulation and limits the chance of small components falling into the slot. The anodised layer is easy to wipe clean and maintains a consistent appearance even after repeated use, supporting a professional workshop environment and lower maintenance intervals. Precision fit for standard slots and minimal interference Engineered to match a slot width of 22 mm, the cover sits flush with most router and milling tables, while the slender 13.7 mm profile keeps height above the table to a minimum. The one-metre (1,000 mm) length provides continuous coverage for long fences or extended table surfaces. At approximately 1.1 kg, the assembly is lightweight yet stable, so it remains in place during routine operations and does not interfere with normal fence or jig setups. Practical benefits: safety, longevity and simple replacement Delivered as a set, the solution enables quick replacement of worn sections without prolonged downtime, helping to keep production flowing. The strip’s material and finish reduce sharp edges and improve handling safety during fitting and cleaning. For users seeking a pragmatic means to protect tooling and maintain a clean working area, this cover presents a durable, low-maintenance option that integrates with existing table equipment and promotes efficient workshop processes. Choose the Vertex VST-22 via Metav Werkzeuge for durable anodised protection and practical set supply; contact our Emmerich-based specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed application guidance Technical data SKU: VST-22 GTIN: 4061905092244 Manufacturer: Vertex Length: 1,000 mm Height: 13.7 mm Weight: 1.1 kg Pieces per set: 5 Suitable slot width: 22 mm Materials and features Commercially anodised aluminium Supplied as a set Designed for router/milling table slot coverage FAQ What slot width does the cover fit? The cover is designed to fit a slot width of 22 mm and is suitable for standard router or milling table slots. Can the strip withstand workshop conditions and cleaning? Yes, the commercially anodised aluminium finish on the VST-22 provides corrosion resistance and is easy to clean, suitable for regular workshop use. Is the product supplied as individual pieces or as a set? The item is supplied as a set to allow straightforward replacement and continuity of coverage on the workbench. Will the cover affect fence alignment or tool operation? The low 13.7 mm profile minimises obstruction and is designed to sit flush, reducing interference with fences and jigs during normal operation. Who manufactures the product and where can technical queries be directed? The cover is manufactured by Vertex; for specific technical questions Metav Werkzeuge can provide application advice and further information. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Benefit from a robust cover that combines hand‑anodised aluminium durability with precise dimensions for reliable milling‑table protection; its 1,000 mm length and 14.1 mm profile close standard slots and reduce contamination. Order the VST-28 cover directly via Metav Werkzeuge or ask our consultants if needed. VST-28 cover for milling/router table slots — 1,000 mm, hand‑anodised aluminium A VST-28 cover engineered to close milling and router table slots, reducing chip ingress and improving workstation safety and cleanliness. Hand‑anodised aluminium construction 1,000 mm length for full table coverage Compatible with 28 mm slot widths Supplied as a set of 5 covers Longer tool life and simple integration for continuous operation The cover is made from hand‑anodised aluminium, a finish that forms a wear‑resistant oxide layer and protects the surface against routine workshop abrasion and corrosion. With a 1,000 mm length and a low profile of 14.1 mm, the component is intended to bridge standard table slots, reducing the entry of chips and coolant into the machine internals. This results in fewer interruptions for cleaning and less risk of contaminant‑related faults, supporting a smoother production flow and predictable maintenance cycles. Compact design that boosts safety and handling efficiency A slim profile and a total weight of 1 kg make the unit easy to manoeuvre during installation and replacement, while the set of 5 configuration ensures spare parts are available when required. The low mass simplifies handling during retrofits and reduces strain during frequent servicing. By closing slot openings, the cover minimises pinch points and reduces the amount of airborne debris around the cutter area, contributing to a safer work environment and lower housekeeping effort. Clear compatibility guidance and straightforward upkeep Compatibility is specified for a 28 mm slot width, so the cover fits common milling and router table grooves without modification. The hand‑anodised surface is non‑porous and can be wiped clean with standard workshop solvents; periodic visual checks are sufficient to assess wear. For users less familiar with table‑slot terminology: the slot width refers to the clearance in the top plate into which the cover is seated. Correct matching of this dimension avoids gaps and ensures the protective effect described above. Choose the Vertex VST-28 cover for dependable slot protection — contact Metav Werkzeuge in Emmerich for ordering and tailored technical advice Technical Data Article number: VST-28 GTIN: 4061905094101 Manufacturer: Vertex Machinery Works Co., Ltd. Material: hand‑anodised aluminium Length: 1,000 mm Height: 14.1 mm Weight: 1 kg Set: 5 pieces Facts Length (mm): 1000 Height (mm): 14.1 Weight (kg): 1 Slot width compatibility (mm): 28 Pieces per set: 5 Special features Hand‑anodised finish Designed for router and milling table slots SKU: VST-28 Brand: Vertex FAQ What slot widths does this cover fit? The VST-28 cover is specified for a slot width of 28 mm and is designed to seat flush in standard router and milling table grooves of that dimension. What is the cover made from and how durable is the finish? Vertex supplies the VST-28 in hand‑anodised aluminium; the anodised layer increases surface hardness and corrosion resistance, reducing wear from routine workshop use. Is the product supplied individually or as a set? The item is delivered as a set of 5 covers, allowing immediate replacements and reducing procurement frequency for workshop supplies. What are the main dimensions to check before ordering? Key dimensions are length 1,000 mm and height 14.1 mm; the product weight is 1 kg. Confirm the table slot width of 28 mm to ensure compatibility with the VST-28. How does the cover improve workshop safety and maintenance? By closing the slot, the cover reduces chip ingress and airborne debris, lowers cleaning frequency and helps mitigate pinch and debris‑related hazards around the cutter area. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan