Ausstattungen für Fräsmaschinen

Take advantage of precise set-up and reliable repeatability thanks to the combination of 0.01 mm accuracy and standard 150 mm length: consistent workholding and quick inspection become routine. Order the set directly via Metav Werkzeuge or consult our specialists for specification support. VP-136 Precision Parallel Set by Vertex — 0.01 mm accuracy, 150 mm length The VP-136 Precision Parallel Set is a workshop and inspection accessory designed for secure, repeatable workholding and setup tasks in metalworking and quality control environments. Tolerance 0.01 mm for high precision Range of sizes suited for versatile setups Stable geometry ensures consistent clamping Maintain micrometre-level consistency across operations The set delivers 0.01 mm tolerance, a level of precision that reduces setup variation and shortens inspection cycles. Precisely ground faces and consistent height control allow reliable support under clamps or between jaws. For production runs and prototype work alike, the measurable reproducibility of the parallels improves part conformity and reduces rework. Technical terms: tolerance refers to the maximum deviation from nominal size; in this case the parallels are made to within 0.01 mm, which supports close-tolerance machining and measurement tasks. Flexible range supports varied clamping and inspection tasks With parallels machined to a standard 150 mm length and a broad span of widths, the set adapts to different clamping arrangements and component geometries. The selection of sizes is intended to simplify jigging, enable parallel stacking and provide firm, flat reference surfaces for measurement and machining. By matching parallel width to the workpiece, vertical runout and angular errors are minimised, which contributes to faster set-up and improved process reliability. This versatility makes the set suitable for milling, drilling and metrology benches. Durable geometry for stable, repeatable setups The parallels feature a form-stable profile and accurate edges that preserve alignment under clamping forces. Stable geometry reduces the need for repeated realignment and supports efficient throughput in busy workshops. Although raw material details are not specified, the construction emphasises dimensional stability and surface flatness; as a result, the parallels act as a dependable reference during both short runs and long production cycles. Careful handling and routine inspection keep the reference surfaces within specification. Practical benefits for workshop workflow and traceability Using a dedicated parallel set standardises fixture procedures and simplifies documentation of setup conditions. Traceable SKU and GTIN labelling allow clear stock control and repeat ordering; precise parallels reduce measurement uncertainty and support quality control processes. The compact footprint and recognisable dimensions also allow simple storage and rapid retrieval during shift changes, contributing to an orderly and efficient shopfloor. Contact Metav Werkzeuge for tailored advice on the Vertex VP-136 Precision Parallel Set — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification guidance and availability Technical Data Article number: VP-136 GTIN: 4061905083310 Manufacturer: Vertex Core measurements Overall dimensions: 390 x 292 x 82 mm Weight: 12.3 kg Accuracy/tolerance: 0.01 mm Parallels length: 150 mm Contents and features Contents cover a broad range of parallel widths from 16 mm to 50 mm, length 150 mm Total pieces per set: 36 Set: yes SKU: VP-136 FAQ How precise are the parallels in this set? The parallels in the VP-136 set are manufactured to a tolerance of 0.01 mm, providing micrometre-level reproducibility for setup and inspection. What length are the parallels and why does that matter? Each parallel in the set has a length of 150 mm, which offers stable support for a wide variety of clamping arrangements and helps to maintain consistent reference planes. Is the set suitable for both workshop and inspection use? Yes, the VP-136 Precision Parallel Set by Vertex is designed for use in machining and metrology contexts where accurate, repeatable workholding and measurement support are required. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine precise angular indexing with sturdy workholding: the VUT-6 offers a 150 mm diameter table and a tilting design for horizontal and vertical setups, delivering repeatable positioning and easy integration into small fixtures. Order the rotary table directly via Metav Werkzeuge or consult their specialists for application guidance. VUT-6 Rotary Tilt Table (Vertex) — 150 mm diameter, tilting horizontal/vertical The VUT-6 rotary tilt table is a compact tilting rotary table intended for machining and fixture applications where both horizontal and vertical orientations are required. 150 mm precision rotary table Tilting design for horizontal and vertical use MT-2 spindle taper for standard tooling 11 mm T-slot for secure fixturing Accurate angular control for consistent machining results The tilting indexer provides precision indexing with clearly specified angular steps, enabling reproducible setups for drilling, milling and fixture alignment. The integral scale details of 6° per spindle rotation for tilt and 4° per spindle rotation for the table offer coarse positioning, while the fine reading of 1′ on tilt and 20″ on the table allows close adjustment when accuracy matters. These indexing features reduce setup time and support consistent batch production. Secure clamping and tooling compatibility for reliable fixtures A standard MT-2 spindle taper ensures broad compatibility with common tooling and collet systems, while the 11 mm T-slot supports versatile clamping arrangements and modular fixturing. The combination of robust workholding and industry-standard taper makes it straightforward to attach fixtures, centres or chucks without bespoke adapters, improving uptime and simplifying changeovers in workshop environments. Compact footprint that integrates into workshop workflows With a compact footprint of 180 x 380 x 115 mm and an overall height of 165 mm, the unit fits easily onto machine tables and in dedicated fixtures. The moderate mass of 23.5 kg balances stability with manoeuvrability, giving the rotary table the rigidity required for machining while remaining manageable for installation. This balance supports flexible use across small to medium machine setups and assembly stations. Contact Metav Werkzeuge for application advice and reliable supply of Vertex workholding solutions from our Emmerich warehouse — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: VUT-6 GTIN: 4061905084669 Manufacturer: Vertex ECLASS: 36600610 Dimensions: 180 x 380 x 115 mm Height: 165 mm Weight: 23.5 kg Facts Table diameter: 150 mm T-slot width: 11 mm Spindle taper: MT-2 Index per spindle rotation: 6° tilt / 4° table Reading resolution: 1′ (tilt) / 20″ (table) Special features Product type: Rotary table / tilting horizontal and vertical Function: Tilting and indexing for versatile fixturing Mounting: Compact footprint for easy integration Suitable for workshop and fixture-building applications FAQ What is the working diameter of the table? The table has a working diameter of 150 mm, providing a stable platform for small to mid-sized fixtures. How precise is the angular indexing? Angular indexing offers coarse steps of 6° per spindle rotation for tilt and 4° for the table, with fine readings of 1′ on the tilt axis and 20″ on the table to aid precise alignment. Which spindle taper does the unit accept? The unit uses an MT-2 spindle taper, compatible with common tooling and collet systems used in machining. Is the table suitable for both horizontal and vertical setups? Yes — the tilting design supports horizontal and vertical orientation, enabling flexible use across different machining and assembly tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Technische Daten: Bezeichnung: Tischnutenplatte Vollhartmetall Material: SS41C Abmessung: 18x60x150mm bis 24x60x90mm Gewicht: 0,76 kg - 1,8 kg Gewinde: M12x1,75P Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren. Vertex, der Hersteller in einigen Worten: Seit der Gründung im Jahr 1978 hat sich VERTEX als eine der führenden Marken in der Branche etabliert. Mit einer beeindruckenden Produktionsfläche von über 15000 m² verfügt VERTEX über die Kapazität, große Mengen hochwertiger Maschinenteile herzustellen, um den steigenden Anforderungen der Kunden gerecht zu werden. Durch modernste Produktionsanlagen und fortschrittliche Fertigungstechnologien gewährleistet VERTEX die Herstellung präziser und langlebiger Produkte. Die Forschung und Entwicklung nimmt bei VERTEX einen hohen Stellenwert ein. Durch kontinuierliche Investitionen in innovative Technologien und Designverbesserungen bleibt VERTEX an der Spitze der Branche. Das engagierte Team von Experten bei VERTEX entwickelt ständig neue und verbesserte Designs, um die Leistung und Effizienz von Maschinen zu steigern. Ein weiterer herausragender Aspekt bei VERTEX ist die hohe Lagerverfügbarkeit. Mit einem beeindruckenden Bestand an Artikeln sind 98% aller Produkte sofort verfügbar. Dies ermöglicht es den Kunden, ihre Produktionsausfallzeiten zu minimieren und den reibungslosen Betrieb ihrer Maschinen sicherzustellen. Als stolzer Hersteller aus Taiwan steht VERTEX für höchste Qualität, Zuverlässigkeit und Kundenzufriedenheit. Die Kunden vertrauen darauf, dass VERTEX ihre Anforderungen versteht und ihnen Maschinenteile von höchster Qualität liefert, die den anspruchsvollen Standards gerecht werden. Interessenten sind herzlich eingeladen, VERTEX zu kontaktieren und mehr über die innovativen Produkte und den erstklassigen Service des Unternehmens zu erfahren. Das Team von VERTEX freut sich darauf, die individuellen Anforderungen der Kunden zu erfüllen und sie bei der Erreichung ihrer geschäftlichen Ziele zu unterstützen.

Compact measuring surface, swivel function and a robust 14 kg construction combine to provide stable, precise workholding for light-duty tasks; order the clamping table directly via Metav Werkzeuge or ask our consultants if needed. Vertex VU-1517 clamping table – Swivel design for light loads The Vertex VU-1517 clamping table is a swivel table designed for light-duty workholding and inspection tasks, offering a compact measuring surface and stable positioning for benches and inspection rigs. Swivel table for light-duty clamping Measuring surface 154 x 176 mm Base footprint 180 x 228 mm Robust 14 kg construction Faster precision for small parts and inspection workflows The swivel design places a measuring surface and workpiece in the desired orientation without repeated reclamping, reducing set-up time in inspection and light machining tasks. With a measuring table of 154 x 176 mm, the unit is aimed at small components and gauges where accurate alignment matters; the clear dimensions simplify fixture planning and help integrate the table into existing test jigs. The compact platform enables fine positional adjustments while the stable build reduces vibration and micro-movement during tactile measurement or light finishing operations. Compact footprint that fits the workshop bench A base dimension of 180 x 228 mm provides a small footprint while retaining stable support for repeatable measurements. The overall height of 105 mm and a mass of 14 kg give the table sufficient inertia for steady clamping without dominating the bench workspace. This combination makes the unit suitable for benches, measuring stands and small assembly stations where space is limited but precision must be maintained. Clear numerical values allow planners to assess compatibility with fixtures and gauges before installation. Swivel function that speeds up set-up and inspection The swivel mechanism allows the clamping surface to be rotated to the ideal angle quickly, which improves workflow efficiency by minimising reclamping and repositioning. For tasks such as visual inspection, marking or light deburring, the ability to orient the component accurately shortens cycle times and reduces handling errors. The straightforward mechanical concept supports reliable repeatability in light-duty applications, making it an effective addition to quality-control stations and precision workshop layouts. For reliable light-duty clamping and quick orientation, choose the Vertex VU-1517 from Metav Werkzeuge; contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and arrange delivery from Emmerich. Technical data Article number: VU-1517 GTIN: 4061905084812 ECLASS: 21020702 Manufacturer: Vertex Dimensions & weight Weight: 14 kg Height: 105 mm Measuring surface: 154 x 176 mm Base footprint: 180 x 228 mm Special features Swivel design for light loads Intended for workshop measuring and light clamping Stable construction for repeatable positioning Technical drawing and detail images available FAQ What is the intended application for this swivel table? The Vertex VU-1517 clamping table is intended for light-duty workholding, inspection and precision measuring tasks where quick orientation and stable positioning are required. What are the dimensions of the measuring surface? The measuring surface measures 154 x 176 mm, providing a compact platform for small components and gauges. How large is the base and how much does the table weigh? The base footprint is 180 x 228 mm and the unit weighs 14 kg, offering a balance of compactness and stability for bench-mounted work. Does the table allow rotation or indexing of the workpiece? Yes, the swivel design enables rotation of the clamping surface to position the workpiece quickly for inspection or light processing. Is the clamping table suitable for heavy machining? The VU-1517 is designed for light loads and precise positioning; it is not intended for heavy machining or high cutting forces. Are technical drawings available for integration into fixtures? Technical drawings and detailed images are provided to assist with fixture planning and bench integration for the Vertex VU-1517 clamping table. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of robust load capacity, a compact precision table, and a swivelling design that improves set-up flexibility for small-series production and inspection tasks; order the clamping table directly via Metav Werkzeuge or consult our specialists for application advice. VUT-1515 Clamping table by Vertex — heavy‑duty, swivelling precision fixture A VUT-1515 clamping table engineered for heavy loads and swivelling positioning, ideal for workshop fixtures, inspection benches and precision assembly tasks Robust base 180×285 mm for stable mounting Swivelling design for versatile positioning Precision table 156×150 mm for small workpieces Rated 30 kg horizontal, 12 kg vertical load Stability that keeps measurements and machining consistent The VUT-1515 delivers a stable platform for demanding workshop tasks thanks to its substantial base footprint of 180×285 mm and a mass of 17.6 kg, which together reduce vibration and movement during clamping or inspection. This stability translates into fewer re‑setups and more reliable results when working with small components on the 156×150 mm measuring surface. The design minimises micro‑motion, aiding repeatable positioning and supporting quality‑control procedures where consistent alignment is required. Flexible positioning for complex setups A swivelling top enables faster orientation of the workpiece without the need for repeated reclamping, making the unit suitable for fixtures that require multiple access angles. The swivel function supports efficient workflow in assembly and measuring stations by allowing quick alignment changes while maintaining the clamped part’s datum. The compact height of 115 mm keeps the centre of gravity low, improving handling when rotating loads and preserving secure contact between the workpiece and the measuring table. Built for heavy‑duty metrology and small production runs Rated to carry 30 kg horizontally and 12 kg vertically, this clamping table is specified for substantial single‑component loads and fixturing of heavier assemblies on inspection benches. The load ratings permit use with robust measuring instruments and small machine tools where a rigid support is essential. The combination of a precision work surface and high load tolerance reduces the need for auxiliary supports, simplifying setup and shortening cycle times in light production and repair workshops. Designed for integration and dependable service life With a compact footprint and standardised mounting dimensions, the clamping fixture fits easily into existing benches or metrology tables, allowing straightforward integration into workshop layouts. The unit’s construction emphasises longevity and consistent performance in repetitive tasks, supporting a predictable maintenance schedule and reducing downtime. Sourcing through Metav Werkzeuge brings additional assurance: supply is coordinated from a European quality filter in Emmerich, ensuring reliable availability and traceable provenance. Contact Metav Werkzeuge for specification support and to arrange fast delivery of the Vertex VUT-1515 clamping table for the workshop or inspection bench Technical Data Article number: VUT-1515 GTIN: 4061905084034 eClass: 21020702 ETIM: EC001959 Facts Weight: 17.6 kg Height: 115 mm Measuring table: 156×150 mm Base footprint: 180×285 mm Load capacity horizontal: 30 kg Load capacity vertical: 12 kg Special features Swivelling design for versatile positioning Suitable for heavy loads Compact precision work surface Brand: Vertex FAQ What maximum load can the clamping table carry horizontally? The clamping table from Vertex is rated for a 30 kg horizontal load capacity, suitable for substantial single components on inspection or assembly benches. Is the work surface suitable for small, precision parts? Yes, the 156×150 mm measuring table provides a compact, accurate platform for small‑part fixturing and measurement tasks. Can the table be mounted on a standard metrology bench? The VUT-1515’s base footprint of 180×285 mm and its compact height of 115 mm allow integration onto typical benches and inspection tables with standard mounting arrangements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of compact design, reliable 1° indexing and flexible chuck options for predictable machining results. Order the unit directly via Metav Werkzeuge or consult the team for specification support. VSR-6 Simple Dividing Head (Vertex) — 1° indexing, 160 mm diameter A practical simple dividing head, VSR-6, designed for angular indexing and rotational positioning in milling and preparatory fixture work. 1° indexing resolution for accurate division 160 mm diameter for stable workpiece support Three- or four-jaw chuck option for versatile clamping Compact 139 mm height for space-efficient mounting Precision indexing for consistent series production The Vertex VSR-6 delivers reliable 1° indexing, enabling straightforward division steps and consistent angular set-ups for repetitive tasks. The precise indexing mechanism reduces time spent on re-centring and adjustment, supporting predictable cycle times and less scrap. Built to assist common workshop operations, the indexing capability is particularly beneficial in small-batch milling, peripheral engraving and other tasks that demand repeatable angular positioning. The robust mechanism prioritises repeatability and stable performance under routine use. Compact footprint that aids machine-table organisation With a working diameter of 160 mm and an overall height of 139 mm, the device fits neatly on standard machine tables and rotary fixtures while keeping the centre of gravity low. The mass of 17.8 kg contributes to inherent vibration damping, which helps to produce cleaner cuts and steadier rotation without adding complex support structures. The compact dimensions make the unit straightforward to integrate into existing setups, reducing the need for extensive fixture redesign and preserving usable table space for auxiliary tooling. Versatile chucking for adaptable clamping tasks Supplied with a three- or four-jaw chuck option, the indexing device accommodates both round and irregular workpieces, enhancing workshop flexibility without the immediate need for bespoke adaptors. The chuck options support a range of common clamping scenarios, from concentric turning to eccentric workholding, and simplify transitions between different part families. As a simple dividing head, the design focuses on essential functionality — sturdy clamping, accurate division and straightforward mounting — to keep set-up times low and throughput high. Backing and service from an experienced precision partner Metav Werkzeuge acts as a committed distribution and quality filter for the European market, offering practical purchasing and logistics from Emmerich. With a long-standing product range and a wide customer base, Metav provides access to technical advice and a controlled supply chain that supports installation and selection decisions. The combination of an established dealer network and a broad product portfolio helps maintain continuity in supply and simplifies material planning for workshops and small production facilities. For tailored advice on chuck options and mounting configurations, contact Metav Werkzeuge in Emmerich to discuss the Vertex VSR-6 and confirm the specification that best suits the application. Technical data SKU: VSR-6 GTIN: 4061905083648 ECLASS: 21020590 Facts Diameter: 160 mm Height: 139 mm Weight: 17.8 kg Indexing resolution: 1° Special features Three- or four-jaw chuck option Simple dividing head for angular indexing Manufacturer: Vertex Images: vsr-6-main.jpg, vsr-6-detail.jpg FAQ What indexing accuracy does the device offer? The unit provides a 1° indexing resolution, allowing straightforward and repeatable angular divisions for common workshop tasks. Which chuck options are available for clamping? The device is supplied with a three- or four-jaw chuck option to support a variety of round and irregular workpieces without immediate need for special adapters. Is the dividing head suitable for standard milling machines? Yes, the simple dividing head is intended for integration on typical milling tables and rotary fixtures where accurate angular indexing is required. What are the key dimensions and mass of the unit? Key dimensions are a diameter of 160 mm, height 139 mm and a mass of 17.8 kg, which supports stability and vibration damping during operation. Who manufactures the product and what is the SKU? The product is manufactured by Vertex; the SKU is VSR-6 and the GTIN is 4061905083648. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining a 160 mm jaw diameter with a self‑centring 3‑jaw layout and reversible operation yields a versatile and robust clamping solution for routine and demanding lathe work. Order the chuck directly via Metav Werkzeuge or consult our specialists for mounting advice and compatibility checks. VSK-6A — 160 mm 3‑Jaw Self‑centring Reversible Chuck by Vertex A VSK-6A 3‑jaw self‑centring reversible chuck designed for reliable, repeatable clamping in general metalworking and lathe operations 160 mm jaw diameter Self‑centring 3‑jaw design Reversible jaw direction for flexibility Threaded mounting with 3xM8 Consistent clamping for steady production The 160 mm jaw diameter and self‑centring mechanism provide fast, repeatable workpiece alignment that reduces setup time and scrap. The three‑jaw configuration ensures concentric clamping of cylindrical parts, which is essential for turning and basic milling tasks. Built to deliver steady holding force, the chuck supports reliable cycle times in serial production while limiting rework and downtime. Flexible operation for varied workshop needs Thanks to the reversible jaw direction and compact 95 mm height, the chuck adapts to different clamping scenarios without frequent changeovers. The reversible feature permits alternative jaw mounting orientations, increasing the range of part diameters that can be gripped securely. This flexibility supports mixed‑batch workshops and reduces the number of specialised fixtures required on the workbench. Clear mounting and handling information for safe use The chuck is supplied with a 3xM8 thread pattern for secure attachment to the spindle or adapter plate and weighs 8.3 kg, balancing robustness with manageable handling in the workshop. The robust design assists in maintaining concentricity under cutting loads while the moderate mass helps dampen vibration. For customers less familiar with chuck mounting, the Metav Werkzeuge team can advise on suitable adapters and tightening procedures to ensure safe, accurate installation. For advice on integration or to order the Vertex VSK-6A via Metav Werkzeuge in Emmerich, contact our specialists at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored assistance and prompt delivery Technical Data Article number: VSK-6A GTIN: 4061905083976 Manufacturer: Vertex Facts Diameter: 160 mm Height: 95 mm Weight: 8.3 kg Mounting thread: 3xM8 Special features 3‑jaw self‑centring chuck Reversible jaw direction Robust design for consistent clamping Suitable for general lathe clamping tasks FAQ What mounting interface does the chuck use? The Vertex VSK-6A uses a 3xM8 threaded mounting interface as specified in the technical data for secure attachment. Can the chuck handle different part diameters without jaw changes? The reversible jaw direction and self‑centring 3‑jaw configuration allow the chuck to accommodate a range of diameters with fewer jaw changes than single‑purpose fixtures. Is the chuck suitable for serial production use? Yes, the VSK-6A is designed for repeatable clamping and steady holding force, making it appropriate for routine production and workshop tasks. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

A compact solution for precise angular indexing: the combination of 160 mm diameter, 4° indexing per spindle revolution, and the supplied 3‑jaw chuck with cover plates ensures quick set-up and reliable repeatability for production and prototyping. Order the CC‑6 rotary dividing table directly via Metav Werkzeuge or ask our consultants for application guidance. Vertex CC-6 rotary dividing table – 160 mm diameter, 4° indexing A compact CC‑6 rotary dividing table designed to deliver accurate indexing and versatile clamping for workshop milling, drilling and rotary‑fixture tasks. Compact 160 mm diameter rotary dividing table 4° indexing per spindle revolution Supplied with 3‑jaw chuck and cover plates Stable 29.5 kg construction for repeatability Accurate indexing that speeds production setups The CC‑6 offers repeatable angular positioning thanks to its 4° indexing per spindle revolution and a fine readout division of 20", which together enable precise angular steps without complex adjustments. For production runs where consistent hole patterns or dividing operations are required, this dividing unit reduces set‑up time and the need for trial cuts. The combination of compact footprint and a clearly graduated readout makes the device suitable for bench milling machines and small lathes, allowing accurate work on small to medium components without sacrificing throughput. Versatile clamping for diverse workpieces Supplied with a 3‑jaw chuck and a set of cover plates (2, 3, 4, 6, 8, 12), the CC‑6 facilitates quick transitions between round and irregular parts and supports common dividing tasks such as gear cutting, slotting and drilling circular patterns. The included accessories reduce the need to source separate fixturing items and shorten machine downtime. The 44 mm centre bore provides compatibility with common spindle arrangements and adaptation accessories, so the dividing table integrates smoothly into existing workshop tooling workflows. Stable dimensions and compact integration for workshop use Measuring 253 x 179 x 225 mm and weighing 29.5 kg, the dividing table combines compact dimensions with mass that helps dampen vibration for improved surface finish and repeatability. The 160 mm diameter table allows secure clamping while fitting typical bench machines, and the unit’s simple design supports routine maintenance and straightforward mounting. Clear mechanical indexing and a robust build promote long service life and predictable performance in daily production environments. Contact Metav Werkzeuge for tailored advice on integrating the Vertex CC‑6 rotary dividing table into specific applications or for assistance selecting compatible chucks and mounting adapters from our Emmerich facility. Technical data SKU: CC-6 GTIN: 4061905083280 ECLASS: 36600610 Designation: Rotary dividing table (simple) Manufacturer: Vertex Facts Diameter: 160 mm Dimensions: 253 x 179 x 225 mm Weight: 29.5 kg Centre bore / spindle mount: 44 mm Indexing per spindle rotation: 4° Readout division: 20" Special features Supplied content: 1x 3‑jaw chuck, cover plates 2, 3, 4, 6, 8, 12 Simple design for ease of use Suitable for workshop milling and drilling applications FAQ What is the primary use of this dividing table? The Vertex CC‑6 rotary dividing table is intended for precise angular indexing and repetitive machining tasks such as circular drilling patterns, slotting and small gear work. Which accessories are included with the CC‑6? The delivery includes a 3‑jaw chuck and cover plates in sizes 2, 3, 4, 6, 8 and 12, enabling a range of clamping options without additional purchases. Can the dividing table be fitted to standard bench milling machines? Yes, the CC‑6’s compact footprint and a 44 mm centre bore make it compatible with common bench milling machines and typical spindle adapters used in small workshops. How does the 4° indexing affect accuracy and setup time? A 4° indexing increment per spindle revolution simplifies the creation of regular angular divisions and shortens setup time for repetitive patterns while maintaining consistent positioning. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of modular fixturing, standard 3/8"-16w clamping bolts and a 7/16" T-slot fit delivers quicker set-ups and reliable repeatability for small to medium machine tables; order the set directly via Metav Werkzeuge or contact our consultants for tailored configuration advice. CK-103A 52-piece clamping tool set by Vertex — 3/8"-16w bolts, 7/16" T-slot compatibility The CK-103A clamping tool set is a compact workholding solution designed for flexible fixturing on milling machines and machine tables where standard T-slots are used. Comprehensive 52-piece clamping kit Fits 7/16" T-slots Contains 3/8"-16w clamping bolts Total weight 6.5 kg for easy handling Faster set-up through modular fixturing and standard components The set is designed to reduce machine downtime by providing a complete assortment of clamping elements that work together without extensive adaption. The combination of standard-threaded bolts and complementary clamping parts enables repeatable positioning and secure fixation, which shortens preparation time and supports consistent production flow. The practical arrangement of components helps maintain process reliability and reduces the need for improvised fixtures, improving overall shop-floor efficiency. Practical contents that support versatile workholding Contained items include a range of bolt lengths and fixturing components selected to cover common clamping scenarios. The kit includes multiple 3/8"-16w bolts in stepped lengths, T-slot adaptors and a mix of clamping and support elements that make it suitable for workpieces of different heights and shapes. This variety means fewer tool changes and less manual modification during setup. For operators less familiar with fixturing, the assortment provides straightforward options that translate technical requirements into functional clamps and supports. Durable design for everyday workshop use and dependable handling Weighing 6.5 kg, the set is portable enough for mobile bench use while remaining substantial for stable handling. The individual parts are organised to maintain accessibility during shift work, helping to avoid lost time searching for components. As a Vertex product, the set follows established manufacturing standards for fit and function, which contributes to long service life under normal workshop conditions and sustained precision in clamping tasks. Contact Metav Werkzeuge to discuss how the Vertex CK-103A set suits specific fixturing requirements or to request a tailored configuration—email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: CK-103A GTIN: 4061905083303 ECLASS: 21041790 Facts Pieces per set: 52 Total weight: 6.5 kg Bolt thread: 3/8"-16w T-slot compatibility: 7/16" Special features Contents: 24 bolts (4 per size: 3", 4", 5", 6", 7", 8" or 75, 100, 125, 150, 175, 200 mm) Contents: 6 T-nut adaptors Contents: 4 couplings Contents: 6 flanges Contents: 6 clamps Contents: 6 blocks FAQ What machine tables does the set fit? The Vertex CK-103A set is suitable for machine tables with a 7/16" T-slot, enabling direct use of the supplied T-nut adaptors and bolts. Which bolt thread is used in the kit? The kit uses 3/8"-16w clamping bolts as standard, supplied in a range of lengths for varied clamping heights. How many individual parts are included? The set contains 52 pieces, including bolts, T-nuts, couplings, flanges, clamps and blocks to cover typical fixturing needs. Is the kit portable for bench use? With a total weight of 6.5 kg, the Vertex CK-103A is compact enough for benchside handling while retaining the robustness required for secure clamping. Can the kit secure different workpiece thicknesses? Yes, the range of bolt lengths and the mix of clamps and blocks in the CK-103A allow secure fixation of workpieces with varying thicknesses without additional bespoke components. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of a rotating base, compact 180 x 290 mm table and a secure T-slot 16 mm for reliable fixture flexibility in medium‑duty machining. Order the clamping table directly via Metav Werkzeuge or consult the team for application advice. VP-250S Clamping Table – rotating base, swivel indexing by Vertex The VP-250S is a compact clamping table with a rotating base and swivel indexing, designed for precise positioning and flexible fixturing in machine shops and toolrooms Robust rotating base with swivel function Table surface 180 x 290 mm T-slot 16 mm for secure fixture Solid mass: 36 kg adds stability Greater positional accuracy for complex setups The combination of a rotating base and swivel indexing provides a clear benefit for angular machining tasks: faster alignment and repeatable positioning reduce setup time and minimise rework. The compact 180 x 290 mm table offers a stable work area for fixtures and small components while keeping the machine envelope efficient. For shops that process varied components, the ability to index the workpiece precisely translates into improved cycle consistency and measurable gains in throughput. The rotating mechanism is engineered for controlled movement, supporting accurate angular adjustments rather than coarse alignment. Secure clamping and reduced vibration for finer finishing Equipped with a T-slot 16 mm, this clamping table enables standard clamps and T‑nuts to be fitted quickly, turning fixture changes into an efficient, repeatable routine. The substantial mass—36 kg—acts as a vibration dampener, improving surface finish and dimensional stability during cutting or grinding operations. For applications where chatter and deflection compromise results, the combination of secure fixturing and inert mass helps maintain tool life and part quality. The engineered interface between table and fixture ensures that clamping forces are transferred consistently into the workholding system. Designed for straightforward shop integration and traceability The VP‑250S is classified under eClass 21020702, making specification and procurement straightforward within industrial catalogues. Its compact footprint and clear identification (SKU: VP‑250S, GTIN: 4061905085024) support efficient inventory handling and shop-floor organisation. Built by Vertex, the unit aligns with standard clamping practices so that existing clamps and tooling remain compatible. This predictability reduces the learning curve for operators and supports a reliable production flow for maintenance, small batch work and prototyping. For stable and accurate fixturing solutions from Vertex, contact Metav Werkzeuge to discuss the VP-250S clamping table and receive tailored application guidance — eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VP-250S GTIN: 4061905085024 eClass: 21020702 Manufacturer: Vertex Data Table surface: 180 x 290 mm Height: 206 mm Weight: 36 kg T-slot: 16 mm Special features Rotating base with swivel indexing Clamping table for fixture use Compact footprint for machine integration FAQ What are the dimensions of the table surface? The table surface measures 180 x 290 mm on the VP-250S clamping table. Does the unit allow angular adjustment? Yes. The VP-250S features a rotating base with a swivel mechanism for indexed angular positioning. Which T-slot size is available for fixturing? The clamping table is fitted with a T-slot 16 mm for standard T-nuts and clamps. What is the overall height and weight? Height is 206 mm and weight is 36 kg for the VP-250S. How can the product be identified for ordering? Identification: SKU VP-250S, GTIN 4061905085024, manufacturer Vertex Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact, repeatable clamping for T-slot tables: the compact dimensions and the set composition allow flexible fixturing with minimal interference. Benefit from stable workholding provided by a set of four, compact T-slot clamping jaws, and order or consult via Metav Werkzeuge for rapid supply from Emmerich. Vertex T-slot clamping jaws (CK-3712) – compact 18×42×23 mm, set of 4 A Vertex T-slot clamping jaw set engineered to secure workpieces on T-slot tables for milling, drilling and general workholding applications. Compact 18 x 42 x 23 mm design Set of 4 for versatile fixturing Total weight 0.6 kg for stable clamping Consistent, compact workholding that reduces setup time The set of 4 compact clamping jaws delivers a pragmatic solution for fixtures where space is limited and repeatability matters. With nominal dimensions of 18×42×23 mm, these components occupy minimal table area while providing defined contact points for accurate positioning. The compact profile reduces collision risk with rotating tools and enables closer approach in multi-axis setups, which contributes directly to shorter batch cycle times and fewer manual adjustments. Compatibility with standard T-slot tables allows integration into existing fixturing concepts without the need for custom adapters. Reliable stability for repeatable machining results Designed for steady contact and predictable behaviour, the jaws offer a balance between low bulk and effective clamping force. The modest total mass of 0.6 kg for the set improves the inertial stability of the clamping assembly while keeping handling straightforward during setup changes. By ensuring consistent seating and minimal movement under cut loads, the components support repeatability across consecutive workpieces, which aids quality control and reduces scrap rates. The CK-3712 SKU is particularly useful where repeatable datum points and reliable clamping are required in serial production or precision repair tasks. Flexible fixture design for varied workshop demands Supplied as a matched set, the jaws simplify layout choices: mixtures of pairs and single units can be combined to create bespoke vice arrangements, stepped clamps or multi-point fixtures. The compact profile makes the parts suitable for close-tolerance clamping on small assemblies and for use as auxiliary clamps in larger setups. Material-specific guidance and maximum clamping forces are determined by the parent fixturing components and machine capabilities; the modular nature of the pieces focuses effort on optimal placement rather than on part-specific hardware. Availability from a specialised supplier streamlines procurement and ensures consistent replacements when scaling up. Contact Metav Werkzeuge for personalised advice, stock availability and fast supply from our Emmerich warehouse to integrate the Vertex CK-3712 T-slot clamping jaw set into existing fixturing workflows Technical Data Article number: CK-3712 GTIN: 4061905085017 Manufacturer: Vertex Data Dimensions: 18 x 42 x 23 mm Weight: 0.6 kg Pieces per set: 4 Special features For T-slot clamping applications Supplied as a matched set of four Compact design for reduced tool interference FAQ What tables are these clamping jaws compatible with? The Vertex T-slot clamping jaw set CK-3712 is designed for standard T-slot tables and can be incorporated into typical milling, drilling and general workholding fixtures. How many pieces are included in one delivery unit? One set contains four clamping jaws; this composition simplifies multi-point fixturing and modular clamping strategies. Are the dimensions suitable for tight fixtures? Yes, the compact 18×42×23 mm footprint of the CK-3712 makes these jaws suitable for tight layouts where minimal interference with tools is required. Does the product ensure repeatable clamping across batches? When installed and tightened consistently, the Vertex clamping jaws provide stable contact and contribute to repeatable positioning and consistent machining results. Can these jaws be used as part of a customised fixture? The matched set format allows flexible combinations—pairs or individual pieces can be arranged to form custom fixtures aligned to the workpiece geometry. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the DIN 6331 standardisation and the compact dimensions — M8 x 1.25 mm thread and 19 mm diameter — for reliable, repeatable joins in precision assemblies. Order the flange directly via Metav Werkzeuge or ask the consultants for application advice. Flange CFN0814 — DIN 6331, M8 x 1.25 mm thread (Vertex) A Flange CFN0814 intended for standardised mechanical joining in precision fixtures and assemblies, manufactured to DIN 6331 DIN 6331 compliant for standardised mounting Metric thread M8 x 1.25 mm for secure fastening Compact 19 mm diameter, 13 mm height Lightweight 15 g for minimal added mass Reliable alignment for repeatable assemblies The flange is engineered to deliver consistent alignment where interchangeability matters. Conforming to DIN 6331 ensures that mating components fit without bespoke machining, reducing setup time and variation in assembled parts. The combination of a defined thread form and precise outer diameter provides a predictable seating surface, which supports reproducible torque values and stabilises connections in fixtures and subassemblies. This predictability translates into measurable process benefits — fewer reworks and more stable production runs. Space-saving design that eases integration With a 19 mm diameter and a 13 mm profile, the component suits compact layouts where access and clearance are constrained. The small mass (approx. 15 g) minimises inertial load on moving subassemblies and contributes negligibly to bearing or drive demands. Because the part occupies limited axial and radial space, it can be integrated into tight clamping systems, jigs or precision fixturing without requiring design changes to adjacent components. The metric M8 x 1.25 mm thread provides a widely available fastening option that simplifies assembly logistics. Standardised compatibility reduces assembly errors Using a standardised flange removes guesswork from procurement and assembly planning. The standard designation signals compatibility across suppliers and tooling, making stock management and replacement straightforward. This component is suitable where a reliable mechanical interface is required and where adherence to established norms supports quality control processes. The clear dimensional references and thread specification aid inspection routines and permit quick verification during incoming goods checks. Supply confidence and a partner for precision Sourcing from a reputable brand such as Vertex and through a specialist distributor like Metav Werkzeuge supports continuity of supply and traceable quality. Metav acts as a quality filter for the European market, combining a broad product range with decades of application knowledge; this ensures that the flange arrives with the consistency expected for industrial use. For procurement teams and workshop managers, the emphasis on standard conformity and compact form factor makes this part a practical choice for both new designs and maintenance inventories. Contact Metav Werkzeuge to confirm compatibility with existing assemblies and to secure reliable delivery of the Vertex flange CFN0814; expert consultants can provide technical clarification and lead-time information Technical data Article number: CFN0814 GTIN: 4061905084409 eClass: 37029205 Manufacturer: Vertex Facts Diameter: 19 mm Height: 13 mm Thread: M8 x 1.25 mm Weight: 0.015 kg Special features Standard: DIN 6331 Compact flange for precision fixtures Metric fastening for broad compatibility Brand: Vertex FAQ What standard does this flange follow? The flange is manufactured to DIN 6331, which ensures standardised dimensions and interchangeability for compatible components, as used with the Vertex flange CFN0814. What are the critical dimensions to consider for integration? Key dimensions are 19 mm diameter, 13 mm height and the M8 x 1.25 mm thread; these determine fit and clearance in assemblies that use the Vertex CFN0814 flange. Can this flange be used in compact assemblies? Yes, the compact profile and low mass (approx. 15 g) make the flange suitable for tight layouts and lightweight subassemblies without significant added inertia. How does DIN 6331 compliance benefit production? DIN 6331 compliance simplifies procurement, inspection and replacement, reducing assembly errors and enabling reliable interchangeability across suppliers for parts like the Vertex flange CFN0814. Is material information available for this flange? Material details are not specified in the available data for this SKU; please consult Metav Werkzeuge for material verification and any application-specific recommendations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact component that combines a standard M8x1.25 metric thread with a minimal footprint of 19×8 mm for secure fixtures in confined assemblies; the low weight (0.013 kg) minimises added mass while simplifying handling and logistics. Order the flange directly via Metav Werkzeuge or ask our consultants if needed. Flange 4512 – compact metric-thread fixing element, M8x1.25, 19×8 mm The Flange 4512 is a small, precision component intended for mechanical assemblies and tooling where a secure metric-thread connection and minimal space usage are required. M8x1.25 thread for standard fittings Compact 19×8 mm footprint Lightweight at 13 g Precision fit for confined assemblies The flange delivers a reliable mechanical interface through its M8x1.25 metric thread and compact 19×8 mm dimensions, making it suitable for tight installation spaces. The defined thread pitch ensures consistent axial engagement with standard M8 fastenings, reducing play and enabling repeatable clamping forces. With a mass of just 0.013 kg (13 g), the part contributes negligible inertia to moving sub-assemblies, which is advantageous in precision mechanisms and low-mass fixtures. The compact geometry also facilitates access in multi-component layouts and supports streamlined assembly sequences for production lines. Standard metric compatibility that simplifies procurement Using a familiar thread standard means the flange integrates seamlessly with off-the-shelf fasteners and mating parts, lowering the need for custom items and simplifying stock management. The M8x1.25 designation denotes an 8 mm nominal diameter with a 1.25 mm pitch, a combination commonly used in machinery and tooling. This compatibility translates into shorter setup times and predictable mechanical behaviour under load. Where interchangeability and maintenance speed are priorities, such standardisation improves operational uptime and reduces procurement complexity across workshops and industrial suppliers. Practical benefits for logistics and workshop routines The small dimensions and low weight support economical storage and transport: more items fit per container and handling is easier on the shop floor. The compact design also aids in modular fixture concepts, allowing designers to place fixing elements close to functional interfaces without compromising clearance. Sourced from a recognised manufacturer, the component aligns with standard inventory hierarchies and can be ordered as a repeatable catalogue item, helping purchasing teams maintain supply continuity for routine replacements and serial production. For reliable supply of Vertex components such as this flange and tailored ordering advice, contact Metav Werkzeuge in Emmerich for stock information and allocation; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4512 GTIN: 4061905083396 Manufacturer: Vertex Key measurements Dimensions: 19×8 mm Thread: M8x1.25 mm Weight: 0.013 kg Special features eClass: 37029205 Gallery files included: 3 images FAQ What thread standard does this flange use? The flange uses a metric M8x1.25 thread, compatible with standard M8 fasteners and mating components suitable for that pitch. Is the flange suitable for confined installation spaces? Yes, the compact 19×8 mm footprint and low weight make the component suitable for installations with limited clearance. How much does the component weigh? The part weighs 0.013 kg (approximately 13 g), which minimises added mass in assemblies. Can this flange be sourced as a catalogue item? The part is supplied by Vertex and listed under article number 4512, enabling repeatable procurement and stock replenishment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise close-up illumination and reliable workshop compatibility to speed up inspection tasks while maintaining stable operation; order the inspection light directly via Metav Werkzeuge or consult our advisors for tailored guidance. VHL-30TEB work lamp — fluorescent with 2.25× magnification and halogen light (Vertex) The VHL-30TEB is a fluorescent work lamp with integrated magnifier, designed for close inspection and fine assembly work in workshop and laboratory environments. Fluorescent light with halogen option 2.25× magnification, 5 dioptre lens 1.8 m power cable included Fits 110 V or 220 V power supplies Clearer detail for faster inspection and quality control The combination of a 2.25× magnifying lens and a 5 dioptre optical system provides enlarged, crisp views that reduce eye strain and improve visual accuracy during inspection. The lamp’s halogen illumination option delivers a warm, continuous light spectrum useful for colour-critical tasks, while the fluorescent mode offers broad-area illumination for general inspection. These features translate into measurable time savings and fewer rechecks, supporting a more efficient workflow in precision-oriented settings. Built for practical workshop use and flexible installation With an IP rating of IP 20, the unit is designed for indoor industrial environments where splash protection is not required but reliable dust protection is beneficial. The assembly rests on a base length of 292 mm and weighs 3.5 kg, offering a stable platform for repetitive tasks. Electrical compatibility with 110 V or 220 V supplies and the included 1.8 m cable makes integration into existing workstations straightforward, reducing downtime and simplifying setup for mixed-voltage operations. Designed to support precision trades and routine maintenance The lamp’s optical clarity and robust construction make it suitable for electronics inspection, jewellery and watch repair, textile inspection and other close-up trades that demand consistent illumination. Supplied by Vertex and prepared for standard workshop conditions, the unit helps technicians achieve repeatable, high-quality results. Practical details such as the integrated magnifier and dependable light source reduce interruptions and support sustained concentration during delicate procedures. Contact Metav Werkzeuge for expert advice on integrating the Vertex VHL-30TEB into workshop processes and arrange fast delivery from our Emmerich warehouse (info@metav-werkzeuge.com / +49 2822 7131930) Technical data Article number: VHL-30TEB GTIN: 4061905083532 Manufacturer: Vertex Facts Weight: 3.5 kg Base length: 292 mm Magnification: 2.25× Dioptre: 5 Cable length: 1.8 m Voltage: 110 V / 220 V IP rating: IP 20 Special features Halogen light option Fluorescent illumination Includes 1.8 m power cable Intended for inspection and close-up work Brand: Vertex FAQ What magnification does the lamp provide? The lamp offers a magnification of 2.25× with a 5 dioptre lens, which is suitable for detailed inspection and fine assembly tasks. Is a power cable included with the VHL-30TEB? Yes, the VHL-30TEB is supplied with a 1.8 m cable to simplify installation at the workstation. Which light types are available on this inspection lamp? The unit combines fluorescent illumination for broad coverage with a halogen option for a warmer, continuous light spectrum. Can the lamp be used with both 110 V and 220 V supplies? The VHL-30TEB is specified for operation at 110 V or 220 V, enabling use in different regional power systems. What does the IP20 rating mean for workshop use? An IP20 rating indicates protection against solid objects larger than 12 mm but not against water ingress, making the lamp suitable for typical indoor workshop environments. Who manufactures the VHL-30TEB? The VHL-30TEB is manufactured by Vertex and supplied through Metav Werkzeuge for European workshop customers. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining a 200 mm height, a 16 mm T-slot interface and a toothless contact face, the VWS-123 delivers dependable, repeatable end stops for machining and fixturing applications; order the workpiece stop directly via Metav Werkzeuge or consult our specialists for integration advice. Workpiece stop VWS-123 — 200 mm height, 16 mm T-slot (Vertex) The Workpiece stop provides consistent end stops for machining and fixturing on T-slotted tables, designed for straightforward integration into workshop and machine setups. 200 mm height for versatile positioning Compatible with 16 mm T-slots Toothless clamping face for smooth contact Lightweight at 0.9 kg for easy handling Repeatable positioning that reduces setup time Engineered for reliable alignment, the VWS-123 workpiece stop secures components against a defined datum so that setups are repeatable across multiple runs. The 200 mm height offers an extended stop surface for taller or uneven workpieces, while the toothless contact face prevents marking on delicate parts. This combination supports faster fixturing and fewer adjustments, improving throughput on small-batch and serial operations. Simple compatibility with standard T‑slot tables The compact design is tailored to fit a 16 mm T‑slot, enabling immediate compatibility with many common machine tables and modular fixturing systems. The T‑slot interface allows secure mounting without complex adaptors, which simplifies retrofitting into existing workflows and reduces downtime during changeovers. Described dimensions and mounting type provide clear criteria for planners and workshop engineers when preparing fixtures. Lightweight handling and workshop practicality At 0.9 kg, the stop is easy to position and reposition by hand, making it suitable for bench setups and quick jigs as well as machine tool use. The toothless contact face allows safe contact with finished surfaces, reducing the risk of cosmetic damage while maintaining a stable end stop. Built for everyday workshop tasks, the device balances manoeuvrability with the dimensional control expected in production environments. Contact Metav Werkzeuge today for tailored advice on integrating the Vertex VWS-123 into existing fixturing — Metav’s team in Emmerich can advise on compatibility, delivery and application-specific solutions via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VWS-123 GTIN: 4061905084348 ECLASS: 21029210 Manufacturer: Vertex Core data Weight: 0.9 kg Height: 200 mm T‑slot: 16 mm SKU: VWS-123 Special features Type: Toothless (without teeth) Category: Vertex Image: vws-123-main.jpg FAQ What T‑slot size is required for mounting? The VWS-123 is designed for a 16 mm T‑slot, ensuring direct compatibility with tables and fixtures that use this standard slot width. Is the stop suitable for delicate or finished workpieces? Yes. The toothless contact face prevents surface marking, making the component suitable for parts where cosmetic integrity matters. How much does the device weigh and is it easy to handle? The stop weighs 0.9 kg, which allows manual positioning for quick setups and straightforward transfer between bench and machine use. Can the component support repeatable serial production setups? Its dimensional design, notably the 200 mm height and T‑slot mounting, provides the consistency needed for repeatable fixturing and short changeover times. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of stable construction, precise MT‑4 spindle compatibility and easy mounting to standard tables for reliable indexing operations; order the Universal dividing head directly via Metav Werkzeuge or consult our specialists for application advice. Vertex BS-2 Universal Dividing Head – MT‑4 spindle, 25 mm T‑slot base A Vertex BS-2 Universal Dividing Head for accurate indexing and angular machining on machine tables and milling machines Robust 65 kg solid construction MT‑4 Morse taper spindle Base compatible with 25 mm T‑slot Stable setup for repeatable indexing and machining The heavy 65 kg mass gives the unit a stable platform that minimises vibration during indexing and light machining operations, helping to maintain repeatable results. With compact overall dimensions of 340 x 359 x 235 mm, the head occupies little table space while providing a rigid mounting point. The combination of mass and compact footprint is designed to reduce chatter and support consistent angular positioning when used on suitable machine tables and fixtures. Precision spindle interface and secure mounting Equipped with a Morse taper (MT‑4) spindle, the device offers a widely used, serviceable interface for collets and arbors, enabling straightforward tool and workpiece attachment. The base is designed for a 25 mm T‑slot mounting, allowing direct clamping to compatible tables without additional adapters. These features simplify integration into existing setups while supporting accurate rotational indexing and repeatable alignment for chamfering, slotting or light dividing tasks. Practical workshop handling and set-up benefits The unit’s dimensions and mounting specification facilitate straightforward positioning on a workshop table; the compact footprint reduces the need for extensive retooling of the work area. The robust construction supports stable operation across routine machining cycles and helps to protect positional accuracy over time. Clear, measurable data on weight and size enable planning for handling and fixturing in machine shops, supporting effective workflow integration. Suited for professional shop environments Designed by Vertex as a universal indexing solution, the BS‑2 offers reliable mechanical features that support efficient set-up and reduced rework. The MT‑4 spindle interface and 25 mm T‑slot compatibility contribute to fast installation and repeatable operation, delivering a pragmatic combination of adaptability and mechanical stability that aligns with professional production demands. Contact Metav Werkzeuge in Emmerich for detailed mounting advice or application consultation via info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and delivery options Technical data Article number: BS-2 GTIN: 4061905084485 Manufacturer: Vertex Facts Weight: 65 kg Dimensions: 340 x 359 x 235 mm T‑slot width: 25 mm Special features Spindle taper: MT‑4 (Morse taper) Product type: Universal dividing head ECLASS: 21020590 FAQ What is the primary function of this dividing head? The BS-2 Universal dividing head by Vertex is intended for accurate indexing and angular machining on machine tables and milling machines. How is the unit mounted to a machine table? Mounting is achieved via the base designed for a 25 mm T‑slot, allowing the Vertex BS-2 to be clamped securely to compatible T‑slot tables. What spindle taper does the product use? The Vertex BS-2 uses a Morse taper spindle, specified as MT‑4, for collets and arbors. What are the dimensions and weight for planning installation? The BS-2 has dimensions of 340 x 359 x 235 mm and a weight of 65 kg, allowing for straightforward handling and fixture planning. Is the dividing head suitable for heavy-duty machining? The robust mass and compact design of the Vertex BS-2 provide good stability for indexing and light to moderate machining tasks; suitability for specific heavy-duty operations should be evaluated against machine capability and fixturing. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of robust build, precise indexing and a complete accessory set for reliable, repeatable dividing tasks on the shop floor. Order the unit directly via Metav Werkzeuge or consult Metav's experts for application advice and fast dispatch. CS-6 Rotary Indexing Table — 203 mm diameter · 4° indexing per spindle turn · Vertex The CS-6 is a compact rotary indexing table designed for precision dividing and machining operations in small to medium workshops. 203 mm precision table diameter 4° indexing per spindle revolution 44 mm spindle bore for standard centres Includes 3-jaw chuck and 250 mm faceplate Consistent indexing for precision production The CS-6 rotary indexing table offers repeatable indexing thanks to a clear spindle division of 4° per full spindle revolution and a fine vernier reading of 20", which together allow controlled, stepwise rotation for milling, drilling and layout operations. This combination reduces setup time and rework, delivering measurable improvements in throughput and part consistency. For firms seeking reproducible results in batch work, the precise division increments translate directly into fewer machine interventions and more predictable production cycles. Compact design that supports stable machining A 203 mm table surface on a compact footprint (250 × 150 × 235 mm) gives access to a wide range of workpiece sizes while keeping space requirements low. At 43.6 kg the unit provides a stable base that dampens chatter during cutting, improving surface finish and tool life. The 44 mm spindle bore accepts common mounting centres and arbor fittings, simplifying integration with existing tooling and reducing the need for special adaptors. The modest overall size and predictable weight make the table suitable for benchtop and machine-table installation alike. Ready-to-use set for flexible applications Supplied accessories make the CS-6 immediately productive: a 3-jaw chuck, 250 mm faceplate and a set of cover plates for common indexing divisions are included. These items broaden application possibilities from simple drilling and slotting to more complex dividing patterns without additional procurement. The accessory package supports quick changeovers and reduces downtime between operations, so workshop tasks can proceed with minimal disruption. Workshop-proven quality and dependable supply Built under the Vertex name, the indexing table reflects a pragmatic balance of robust construction and serviceable design that suits everyday industrial use. Metav Werkzeuge acts as a European quality filter and logistics partner, offering rapid dispatch and a stocked supply chain from Emmerich that supports steady production. With a long track record and a broad product range, Metav provides the procurement reliability expected by industrial buyers, making the table a pragmatic choice for workshops seeking durable, easy-to-integrate dividing solutions. Contact Metav Werkzeuge for specific application advice on the Vertex CS-6 rotary indexing table and ensure rapid dispatch from Emmerich — email info@metav-werkzeuge.com or phone +49 2822 7131930 for tailored recommendations Technical Data SKU: CS-6 GTIN: 4061905084966 Eclass: 36600610 Manufacturer: Vertex Facts Diameter: 203 mm Dimensions: 250 × 150 × 235 mm Weight: 43.6 kg Spindle bore: 44 mm 1 spindle rotation: 4° Reading division: 20" Special features Set contents: 1x 3-jaw chuck, 1x 10"/250 mm faceplate, cover plates 2, 3, 4, 6, 8, 12 Model designation: CS-6 Super Includes protective cover plates FAQ What level of indexing precision does the table provide? The CS-6 rotary indexing table provides a basic division of 4° per spindle revolution with a vernier reading of 20" for fine adjustments, allowing accurate stepwise rotation for common dividing tasks. Which items are supplied with the machine? Delivery of the CS-6 includes a 3-jaw chuck, a 250 mm faceplate (10") and a set of cover plates for standard division patterns, enabling immediate use after mounting. What spindle or arbor sizes does the table accept? The table features a 44 mm spindle bore, compatible with standard centres and arbors used in small to medium workshop setups. Is the CS-6 suitable for benchtop installation in a small workshop? Yes. The compact dimensions and a weight of 43.6 kg give the CS-6 enough mass for stable operation while remaining small enough for benchtop or machine-table mounting in constrained workshop spaces. Can the unit be used for both milling and drilling dividing operations? Yes. With the supplied chuck and faceplate and the precise indexing increments, the CS-6 is suitable for a range of dividing tasks commonly found in milling and drilling applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high load capacity, compact installation dimensions and robust mounting to reduce impact loads and extend machine service life. Order the unit directly via Metav Werkzeuge or consult Metav's specialists for tailored mounting advice. Vertex VSA-150K Shock Absorber — 22,500 kg load capacity, M20x93L thread A heavy-duty shock absorber designed for industrial machinery and clamping applications, providing impact damping where high static loads and compact installation are required. High load capacity: 22,500 kg M20 x 93L threaded connection Compact size 200 x 160.5 x 191 mm Longer service life through controlled impact absorption The Vertex VSA-150K acts as a purpose-built damping element that reduces peak loads transmitted to frames and fixtures. With a high load capacity of 22,500 kg, impacts and dynamic shocks are dissipated, which lowers stress on bearings and welded joints and prolongs maintenance intervals. The result is a measurable reduction in unscheduled downtime and a more predictable component lifetime. For engineers, this translates into simplified load calculations and a clear basis for integrating damping into machine safety concepts. Straightforward mechanical integration and secure attachment Designed with a standard M20x93L threaded connection, the absorber offers a familiar mounting interface: M20 refers to a 20 mm metric thread diameter and 93 mm denotes the threaded engagement length. The compact footprint of 200 x 160.5 x 191 mm and a mass of 9.32 kg allow installation in confined spaces without compromising stability. Mechanical integration is facilitated by common tooling and fasteners, enabling robust clamping and repeatable alignment during assembly. The geometry supports both vertical and horizontal arrangements where axial damping is required. Practical benefits for workshop and production environments The device is engineered for continuous operation in industrial settings and complements clamping systems, presses and heavy jigs where impact mitigation is essential. The robust construction and compact form factor make the unit suitable for retrofit projects as well as new machine designs. Installation reduces vibration transmission to substructures and can improve process accuracy by stabilising tool and workpiece interaction. Delivery readiness and clear identification via SKU and GTIN support procurement and inventory tracking in production logistics. Contact Metav Werkzeuge in Emmerich for application advice and to arrange supply of the Vertex VSA-150K shock absorber via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VSA-150K GTIN: 4061905083952 Dimensions: 200 x 160.5 x 191 mm Weight: 9.32 kg Thread: M20x93L Facts Maximum load: 22,500 kg ECLASS: 27291201 SKU: VSA-150K Special features Manufacturer: Vertex Product type: Shock absorber Suitable for integration in industrial machinery FAQ What maximum load can the shock absorber handle? The Vertex VSA-150K is specified for a maximum load of 22,500 kg, making it suitable for heavy-duty damping tasks. What does the thread designation M20x93L mean? M20x93L indicates a metric thread with a 20 mm diameter and a 93 mm threaded engagement length for secure mechanical mounting of the VSA-150K. Is the device suitable for retrofit into existing machines? Yes, the compact dimensions and standard M20 thread allow the absorber to be retrofitted into many existing heavy machinery and clamping systems. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The compact indexing head combines 1° indexing, a 25 mm mounting bore and a rugged 7.5 kg build to deliver repeatable angular positioning with minimal setup time. Benefit from precise, space-saving fixturing that speeds batch and prototype work — order via Metav Werkzeuge or consult the team for specification advice. VSI-3 Indexing Head by Vertex — 25 mm mounting bore, 1° indexing The VSI-3 is a compact parts indexing head designed for precise angular positioning in workshops and small production cells, suitable for fixturing, measurement and light machining tasks. 1° indexing increments 25 mm mounting bore Compact 120 x 117 x 116 mm footprint Robust 7.5 kg construction Accurate angular positioning for repeatable setups The VSI-3 offers 1° indexing, a mechanical step size that enables reliable division of a full rotation into repeatable angular positions. This degree step is displayed as a clear graduations value, which simplifies the selection of common indexing angles without digital aids. The result is improved repeatability during batch operations and reduced time spent on alignment checks. For operations that demand consistent angular locations — such as drilling patterns, inspection stages or light reaming — the precise step increments translate directly into fewer rejects and more predictable throughput. Compact footprint that eases integration into fixtures With external dimensions of 120 x 117 x 116 mm and a standard 25 mm mounting bore, the unit is purposely compact to fit tight fixture layouts and small machine tables. The small envelope supports efficient use of bench or machine table space while enabling straightforward mechanical coupling to existing spindles or adapters. This compactness reduces the need for complex fixturing and helps maintain clear access to the workpiece, making it suitable for both prototyping benches and limited-footprint production cells where space economy matters. Solid mass and construction for stable operation At 7.5 kg, the indexing head provides a substantial, vibration-damping mass that contributes to stable positioning under machining light loads. The noticeable mass and robust design reduce micro-movements during short machining cycles and measurement routines, increasing the quality of each indexed operation. The construction supports frequent cycle usage common in workshop environments, and the mechanical simplicity means maintenance is limited to routine checks and lubrication rather than frequent part replacement. Straightforward handling for faster cycle times The mechanical indexing principle of this head keeps operation intuitive and fast: once mounted via the 25 mm bore, indexing steps are set and locked with minimal tooling. This lowers setup complexity and shortens the time from first part to steady production. The device is particularly suitable where controlled angular positioning is required without the overhead of fully motorised rotary tables — a pragmatic balance of precision and operational speed that fits many small- to medium-scale machining and inspection workflows. Choose Vertex quality for dependable indexing: contact Metav Werkzeuge in Emmerich for technical guidance and procurement of the VSI-3 indexing head to streamline angular positioning in workshop and small production applications Technical data Article number: VSI-3 GTIN: 4061905084973 Designation: Parts indexing head (Teileapparat) Mounting bore: 25 mm Index increments: 1° Dimensions: 120 x 117 x 116 mm Weight: 7.5 kg Facts Weight: 7.5 kg Dimensions (L × W × H): 120 x 117 x 116 mm Mounting bore diameter: 25 mm Index step: 1° Special features Designation: Indexing head (Index) Manufacturer: Vertex eClass: 21020590 SKU: VSI-3 FAQ What indexing resolution does the VSI-3 provide? The VSI-3 indexing head offers 1° indexing increments, enabling reliable division of the full circle into repeatable angular positions for machining and inspection tasks. Which mounting interface is required for installation? The unit uses a 25 mm mounting bore for attachment; the design allows straightforward coupling to compatible spindles or fixture adapters commonly found in workshop setups. Is the VSI-3 suitable for light machining operations? Yes, the VSI-3 indexing head (Vertex, SKU VSI-3) is designed for light machining and fixturing where precise angular positioning and mechanical stability are required. How does the mass of the device affect performance? The 7.5 kg mass improves stability and vibration damping during short machining cycles, which supports consistent positioning and better surface quality in repetitive operations. Can the indexing head be used for inspection and measurement tasks? The compact indexing unit is suitable for inspection and measurement workflows that require repeatable angular steps, offering a robust mechanical basis for comparative checks and staged measurements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact, precision-focused components that support consistent set-up and reliable step clamping are combined with easily verifiable specifications. With a compact footprint of 25 x 30 x 19 mm and repeatable positioning, this element streamlines fixture changes and reduces set-up time. Order directly via Metav Werkzeuge or consult the in-house specialists for tailored procurement guidance. Step Block — Compact, precision clamping element (Vertex) A Step Block for accurate step-height alignment in workholding and fixture applications, designed to simplify repeatable positioning in machining setups Compact dimensions 25 x 30 x 19 mm Precise step alignment for workholding Compatible with standard fixture setups Consistent clamping accuracy for repeatable setups A compact step element delivers measurable benefits for production workflows by improving repeatability during fixture changes. The small footprint and defined geometry ensure that step alignment is consistent from one set-up to the next, reducing the need for fine adjustments. For shops focused on cycle-time reduction and process stability, a well-specified block supports faster changeovers and less scrap, translating into tangible efficiency gains on the shop floor. Space-saving design that speeds fixture changes A reduced component size contributes directly to a more efficient machine table layout, freeing capacity for additional clamps or workpieces. The described 25 x 30 x 19 mm footprint is beneficial where space is constrained or where multiple step heights must be staged close together. By enabling compact stacking and predictable placement, the element helps cut overall set-up time and keeps toolpaths clear, supporting higher throughput without compromising positional control. Traceability, documentation and practical deployment Clear identification and accessible imagery simplify procurement and inspection tasks. The product is supplied with reference images and a technical drawing, facilitating verification against CAD layouts and control plans. Where documentation is required for quality records, the available data points such as GTIN and SKU aid traceability. For integration into existing fixturing systems, planners will appreciate having concise, verifiable specifications to compare with design tolerances. Contact Metav Werkzeuge in Emmerich for specialist advice on the Vertex Step Block (SKU 5114) and to arrange supply tailored to specific fixture requirements via info@metav-werkzeuge.com Technical data Article number: 5114 SKU: 5114 GTIN: 4061905083501 EClass: 21170107 Name: Step Block Brand: Vertex Numbers / Core technical data Dimensions: 25 x 30 x 19 mm Designs / Special features Images and technical drawing available (see product gallery) Compact footprint for dense fixture layouts FAQ What are the exact dimensions of the step block? The Step Block (Vertex, SKU 5114) measures 25 x 30 x 19 mm as stated in the product specification. Is material information provided for this Step Block? Material data is not specified in the available product fields for the Step Block (Vertex, SKU 5114); refer to the product gallery and technical drawing for visual assessment or check the product page for further details. Can this element be used in standard clamping fixtures? Yes, the Step Block (Vertex, SKU 5114) is described for step-height alignment and is compatible with typical fixture setups where compact positioning elements are required. Are there images or technical drawings to assist integration? Yes, the product includes a main image and a technical drawing in the gallery for the Step Block (Vertex, SKU 5114) to support CAD verification and assembly planning. How is the product identified for ordering and traceability? Identification is provided via SKU 5114 and GTIN 4061905083501 for the Vertex Step Block, enabling straightforward procurement and traceability. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the robust construction and compact 280 x 210 x 30 mm footprint to secure stable, repeatable clamping in workshop setups; compatibility with Vertex VHT vices keeps tooling lines simple and reduces changeover time. Order the base directly via Metav Werkzeuge or consult the specialists for application advice. HS-4 base for Vertex VHT vices — 280 x 210 x 30 mm compact mounting plate The HS-4 is a precision base plate for Vertex VHT vices, engineered to provide a stable mounting platform and consistent clamping alignment in industrial and workshop environments. Solid base plate 280×210×30 mm Compatible with Vertex VHT vices Robust construction, mass approx. 4 kg GTIN 4061905084249 for easy identification Stable foundation that improves clamping repeatability A solid mounting plate delivers measurable benefits for machining consistency. The 280 x 210 x 30 mm footprint provides a low centre of gravity and a predictable contact area that increases mounting stability, reducing vibration and positional deviation during operations. With a mass of 4 kg, the plate adds inertial damping without excessive bulk, which supports more accurate clamping cycles and fewer reworks. This results in improved throughput and a clearer process window for quality control. Compact design that optimises workshop workflows Space is at a premium in many production environments; a compact base plate can streamline workstation layout. The compact dimensions allow straightforward placement on machine tables or dedicated benches while maintaining access to the vice and tooling. The compact format also simplifies handling during set-up and storage, meaning changeovers can be completed faster and floor space is used more efficiently. The design supports lean workflows and reduces non-productive time in busy shops. Direct compatibility to reduce set-up complexity Compatibility with Vertex VHT vices simplifies integration into existing clamping systems and tool stacks. The base is intended for seamless mounting to Vertex vices, avoiding the need for custom adapters or additional fixturing. This direct fit reduces set-up steps and lowers the risk of errors during assembly, supporting a more reliable process chain from fixture to workpiece. Fewer components in the clamping stack also means simpler inventory management and quicker replacement when necessary. Engineered durability for consistent long-term performance A robust base plate minimises wear-related drift and maintains alignment across repeated cycles, contributing to stable part quality over time. The construction supports routine workshop handling and the demands of daily machining activities while preserving the intended geometry for precise clamping. Choosing a durable mounting solution aids predictability in production and reduces the frequency of adjustments, which is valuable for small-batch work and serial manufacturing alike. Contact Metav Werkzeuge in Emmerich for a compatibility check, technical advice or a tailored quotation — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: HS-4 GTIN: 4061905084249 ECLASS: 21029106 Dimensions: 280 x 210 x 30 mm Weight: 4 kg Manufacturer: Vertex Core data Dimensions: 280 x 210 x 30 mm Weight: 4 kg GTIN: 4061905084249 Compatibility and special features Compatible with Vertex VHT vices Compact mounting plate for machine tables and benches Rapid dispatch indicated in product listing FAQ What are the exact dimensions of the base? The base measures 280 x 210 x 30 mm, providing a compact mounting footprint suitable for machine tables and benches. Which vices are supported by this mounting plate? The plate is designed for use with Vertex VHT vices, enabling direct mounting without additional adapters for most standard VHT vice models. How heavy is the HS-4 base and how does that affect machining? The plate has a mass of approximately 4 kg, which adds useful inertial damping to reduce vibration without making handling unwieldy during set-up. Is the HS-4 suitable for production and workshop use? Yes — the base is engineered for workshop conditions and frequent handling, offering durable support for repeated clamping operations. How can compatibility or suitability be confirmed for a specific machine? Compatibility can be verified with detailed mounting dimensions; Metav Werkzeuge can assist with checks and application advice for the HS-4 base. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Stable, compact mounting plate with defined dimensions and a substantial mass for predictable fixture behaviour. Combine the Vertex Base HSO-5's clear sizing and compatibility with Vertex VHO vices to streamline setup and improve process reliability; order via Metav Werkzeuge or consult our technical team for specification support. Vertex Base HSO-5 — Base for Vertex VHO vices, compact stability The Vertex Base HSO-5 is a compact mounting plate designed to provide a predictable and space-efficient platform for Vertex VHO vices in workshop and machine table applications. Compatible with Vertex VHO vices Dimensions 285 x 263 x 35 mm Weight 12.5 kg for stable support Compact footprint for bench mounting Predictable stability that supports accurate clamping A deliberately dimensioned mounting plate delivers a stable platform for fixture and vice assemblies. With overall dimensions of 285 x 263 x 35 mm and a mass of 12.5 kg, the base reduces the tendency to shift under load and aids in maintaining consistent clamping geometry. This predictability simplifies setup routines and shortens machine downtime, making it easier to achieve repeatable alignment without extensive fixturing adjustments. The clear, measured specification supports planning and CAD integration for production layouts. Seamless compatibility for faster workstation integration Designed specifically for use with Vertex VHO vices, the unit allows for straightforward integration into existing benches and tables. The compact footprint supports efficient workshop layout and leaves space for peripheral tooling. Because the plate is purpose-built for these vices, alignment and orientation become repeatable tasks rather than trial-and-error operations, which improves throughput and reduces the need for frequent reworking. Technical drawing and image references are provided to assist in mounting decisions and to verify fit before installation. Procurement confidence and workshop-level quality assurance Sourcing through Metav Werkzeuge brings the advantage of a centralised supply chain and a quality filter based in Emmerich, ensuring that precision components meet European workshop requirements. Metav’s approach to democratising precision means reliable availability and a broad accessory range to complement the base plate. For buyers seeking predictable performance and straightforward logistics, this product combines clear technical data with a supplier experienced in supporting industry and trade. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the Vertex Base HSO-5 into existing setups or request detailed drawings and order information via info@metav-werkzeuge.com Technical data Article: HSO-5 GTIN: 4061905083655 ECLASS: 21029106 Designation: Base For: Vertex Schraubstöcke VHO Facts Dimensions: 285 x 263 x 35 mm Weight: 12.5 kg Special features Compatibility with Vertex VHO vices Main image and technical drawing available in the gallery FAQ What is the purpose of this base plate? The base plate provides a compact and stable mounting surface for vice assemblies; the Vertex Base HSO-5 is intended to secure Vertex VHO vices and support repeatable fixturing. Will the Vertex Base HSO-5 fit existing Vertex VHO vices? Yes, the component is specified for use with Vertex VHO vices; refer to the supplied technical drawing to confirm hole positions and mounting orientation. How does the weight affect machining stability? The 12.5 kg mass of the plate contributes to a more stable support under clamping loads, reducing movement and helping to maintain consistent alignment during operations with the Vertex HSO-5. Are there images or drawings to verify fit before purchase? Technical drawings and a main product image are included in the gallery to assist with verification of fit and to support planning for installation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of 650 in/lb torque, a variable speed range up to 160 rpm (200 rpm max) and a compact footprint ensures consistent material advancement and reduced manual effort on the workshop table; order the unit directly via Metav Werkzeuge or consult the advisors for application support. VPF-500X Table Feed — 650 in/lb Torque, 110 V supply (Vertex) The VPF-500X is a compact table feed designed to deliver uniform workpiece advancement for machining tasks on milling and drilling equipment. High torque 650 in/lb output Variable speed 4–160 rpm, max 200 rpm Compact 290×200×320 mm footprint Robust 6.3 kg construction for stability Reliable, consistent feed for improved machining quality The rigid design and 650 in/lb torque provide a steady drive force that keeps feed motion uniform under load, which directly contributes to consistent surface finish and reduced rework. The wide variable speed range from 4–160 rpm (with short-term capacity to 200 rpm) allows the feed to be matched to cutting conditions rather than forcing a one-size-fits-all setting. This capability reduces cycle variations, supports repeatable results and lowers the frequency of manual adjustments, promoting higher throughput on batch jobs. Easy installation and compact integration minimise downtime With a compact footprint of 290×200×320 mm and a mass of 6.3 kg, the unit integrates into confined table setups without extensive modification. The standard 110 V supply simplifies electrical connection in many workshop environments and eliminates the need for special power arrangements in most cases. The result is faster commissioning and a quick return to production following fitment, helping workshops maintain operational continuity with minimal installation complexity. Durable construction lowers maintenance needs and increases uptime The feed’s substantial assembly and stable mass dampen vibrations during operation, supporting smoother feed motion and prolonged component life. Rated for routine speeds within its variable range and occasional peaks to 200 rpm, the device is optimised for continuous workshop use while keeping servicing requirements straightforward. The design reduces the risk of feed slippage or inconsistent advance, which translates into fewer interruptions and a longer interval between maintenance cycles. For reliable torque and compact integration choose the Vertex VPF-500X via Metav Werkzeuge; contact Metav Werkzeuge in Emmerich for an application consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: VPF-500X GTIN: 4061905083945 Manufacturer: Vertex Facts Torque: 650 in/lb Speed: 4–160 rpm, max 200 rpm Dimensions: 290×200×320 mm Weight: 6.3 kg Supply voltage: 110 V eClass: 36609221 Special features Compact table feed design Power feed for milling and drilling applications Robust construction for stable advancement SKU: VPF-500X FAQ What machines is this table feed suitable for? The VPF-500X table feed is intended for installation on milling and drilling tables where controlled, continuous workpiece advancement is required and where the compact footprint suits the available space. How does the variable speed support different machining tasks? Variable speed from 4–160 rpm (with a short-term capability to 200 rpm) allows the feed rate to be matched to cutting parameters and material properties, so operators can optimise feed for finish or stock removal as needed. Is the electrical supply compatible with standard workshop power? The unit is supplied for 110 V, which aligns with common workshop supplies; voltage requirements should be confirmed against local installations before commissioning. What maintenance can be expected for the VPF-500X? Regular checks for secure mounting and occasional lubrication where specified will support long-term reliability; the robust build of the VPF-500X reduces the frequency of repairs and helps maintain consistent feed performance. Can this feed handle heavy-duty production use? Designed with 650 in/lb torque and a stable mass, the feed is suited to repetitive workshop tasks; selection for heavy-duty production should consider specific cycle demands and integration with the machine tool. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Reliable automatic lubrication with an adjustable dosing cycle and a 2 L reservoir reduces unplanned downtime and simplifies routine maintenance; order the unit via Metav Werkzeuge or consult the team for tailored advice. Vertex SMA-3 Lubrication pump — Electric automatic, 2 L capacity The Vertex SMA-3 is an electric, automatic lubrication pump designed for scheduled dispensing in workshop and light industrial environments. Electric automatic lubrication pump, 2 L capacity Adjustable dosing interval: 5/10/15/30/60 min Operates at 3 kg/cm² pressure Dual supply voltage 110 V / 220 V Consistent lubrication for longer machine life Automated dosing keeps contact surfaces lubricated at regular intervals, reducing friction and wear and extending service intervals. The unit includes a 2 L reservoir that lowers refill frequency and an adjustable dosing regime with settings every 5, 10, 15, 30 or 60 minutes, enabling tailored lubrication cycles for varying workloads. The 3 kg/cm² pressure rating supports reliable lubricant delivery across common point-of-use greasing systems, providing a measurable, efficient way to protect bearings and sliding guides. Flexible installation and simple electrical integration The pump accepts both 110 V / 220 V, so it adapts to different site supplies without additional transformers. Its 1.8 kg weight and compact footprint (158 × 108 × 201 mm) make it straightforward to position close to the lubrication points or to mount in confined spaces. The electric automatic operation removes manual dosing tasks from daily workflows and integrates easily into existing maintenance routines, offering consistent performance with minimal user intervention. Easy upkeep and dependable supply chain Maintenance is kept simple: the transparent scheduling and the adjustable frequency settings reduce monitoring effort and ensure continuity. Replenishing lubricant is straightforward thanks to the accessible reservoir design, and the unit’s modest size supports quick replacements where needed. Metav’s presence in Emmerich acts as a regional quality filter and supply partner, combining wide product availability with consistent logistics to keep workshops reliably supplied. Choose the Vertex SMA-3 for dependable automatic lubrication — contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 for precise ordering and fast dispatch Technical data Article number: SMA-3 GTIN: 4061905084751 Manufacturer: Vertex ECLASS: 23069090 Core specifications Capacity: 2 L Pressure rating: 3 kg/cm² Supply voltage: 110 V / 220 V Weight: 1.8 kg Dimensions (W × D × H): 158 × 108 × 201 mm Special features Electric and automatic operation Frequency adjustable every 5/10/15/30/60 min Compact, lightweight design Designed for scheduled workshop lubrication FAQ How often can the pump be programmed to dispense lubricant? The Vertex SMA-3 lubrication pump provides adjustable intervals of 5, 10, 15, 30 or 60 minutes to suit different application demands. What reservoir volume does this unit provide? The unit has a 2 L reservoir, which reduces refill frequency for routine maintenance cycles. Which supply voltages are supported? The pump supports both 110 V and 220 V operation, allowing flexible installation across different electrical systems. What delivery pressure can be expected from the pump? The pump is specified for operation at 3 kg/cm², ensuring consistent lubricant flow for common greasing points. Is the SMA-3 suitable for compact installations? Yes; the SMA-3’s compact dimensions and 1.8 kg weight make it well suited to confined workspaces and close-to-application mounting. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan