Ausstattungen für Fräsmaschinen

Take advantage of the combination of high stability, fine‑grain cast iron construction, and consistent measurement accuracy for reliable inspection and machining setups; order the part or consult Metav Werkzeuge for application advice. V-8V Prism Block — Vertex prism block in fine‑grain cast iron with 0.05 mm accuracy The V-8V Prism Block is a robust precision support for inspection benches and machining fixtures, designed to stabilise and align cylindrical workpieces during measurement and tooling operations. Fine‑grain cast iron construction Measurement accuracy 0.05 mm Stable 16.7 kg mass for vibration damping Compact dimensions 103×206×143 mm Consistent measurement support through mass and material The combination of fine‑grain cast iron and a substantial 16.7 kg mass provides a stable base that reduces measurement scatter and dampens vibrations during both static inspection and light machining tasks. Heavy mass minimises movement that would otherwise affect repeatability; the material choice contributes to thermal stability and wear resistance, which supports long‑term measurement consistency. These properties make the block especially suitable where small deviations can compromise part acceptance and downstream assembly. Precise geometry that reduces setup error A well‑defined V profile ensures reliable seating and repeatable alignment of round bars, shafts and cylindrical components. By centring parts in the trough, the prism geometry reduces lateral shift and angular misalignment, which simplifies comparative measurements with micrometres or a precision caliper. The specified accuracy of 0.05 mm describes the manufacturing tolerance of the seating surfaces and indicates the expected maximum deviation under normal conditions, enabling process planners to account for this when setting inspection limits. Practical integration and handling in the workshop With compact dimensions of 103×206×143 mm, the block fits inspection benches and modular fixturing systems without occupying excessive space. The mass contributes to a secure feel on the bench and resists displacement during clamping or when measuring longer workpieces. The unit is straightforward to position and pairs well with common measurement aids such as V‑blocks, clamping straps and gauge stands, supporting efficient workflows in quality control and small batch production. The construction also supports routine cleaning and bench usage typical for metrology equipment. Discuss application requirements with Metav Werkzeuge in Emmerich to confirm suitability for specific tasks and to request additional technical documentation or mounting suggestions Technical Data SKU: V-8V GTIN: 4061905089046 Manufacturer: Vertex Facts Dimensions: 103×206×143 mm Weight: 16.7 kg Accuracy: 0.05 mm Special features Material: fine‑grain cast iron Product type: prism block Category: Vertex FAQ What materials is the prism block suitable for supporting? The V-8V prism block by Vertex is designed to support cylindrical components made of metals commonly inspected in workshops; its fine‑grain cast iron base provides stable seating for steels and non‑ferrous bars during measurement. How does the specified accuracy affect inspection results? An accuracy of 0.05 mm for the seating surfaces defines the maximum expected deviation of the block geometry; this value helps to establish measurement uncertainty budgets when using the V-8V prism block in comparison measurements. Can the block be used with a precision caliper or micrometer? Yes, the prism profile and stable mass make the unit suitable for use with a precision caliper or micrometer; it centres round parts and reduces errors caused by part movement during measurement. Is the prism block easy to integrate into existing inspection benches? The compact footprint and substantial mass allow straightforward placement on inspection benches and integration with clamping aids, making the V-8V practical for both fixed benches and portable inspection set‑ups. Where can the V-8V be sourced and are spare parts available? The V-8V (SKU V-8V) is distributed by Metav Werkzeuge; for information on availability and accessory options consult Metav or request the manufacturer's documentation. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact support with a 107 mm centre height and a 134 x 94 mm base gives steady workpiece support while keeping the workshop layout efficient. The robust 4 kg construction ensures stability during turning operations. Order the tailstock directly via Metav Werkzeuge or consult our technical team for compatibility advice. Reitstock – Tailstock for BS lathes, 107 mm centre height (Vertex) A Reitstock designed as a tailstock for BS lathes, providing steady axial support for workpieces during turning and light metalworking tasks. Compact 134 x 94 mm base footprint 107 mm centre height for small lathes Robust 4 kg construction for stability Designed for BS lathe series Steady support that improves machining quality The principal role of a tailstock is to provide axial support and reduce deflection during turning; this results in improved surface finish and tighter tolerances. With a centre height of 107 mm, the support point aligns the workpiece concentric to the spindle axis on many compact and benchtop lathes. By stabilising long or slender components during machining, the support device reduces chatter and repeat operations, which translates into fewer rejects and a more efficient production flow. The function is straightforward but essential: steady support yields consistent results. Space-saving footprint eases integration into workshops A base footprint of 134 x 94 mm keeps the unit compact and simple to position on smaller lathe beds where space is at a premium. The modest footprint combined with a robust 4 kg mass helps balance two competing needs: minimal intrusion on the work envelope and sufficient mass for damping vibrations. For workshops that prioritise flexible layout and quick changeovers, the compact design makes the tailstock easy to mount, reposition and store without compromising on the stability required for quality turning operations. Durable assembly built for routine workshop use Designed for regular use in machining tasks, the tailstock is engineered to deliver dependable support across a range of routine turning operations. The relatively low weight contributes to handling ease during setup, while the solid build supports ongoing production demands. Integration into existing equipment is simplified by its dedicated fit for the BS lathe series, enabling predictable behaviour in serial or small-batch manufacturing. The result is a pragmatic addition to any workshop seeking consistent, repeatable workholding without unnecessary complexity. Choose the Vertex tailstock for reliable workpiece support and order through Metav Werkzeuge in Emmerich for fast dispatch and specialist advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: BS-0-TS GTIN: 4061905084232 Manufacturer: Vertex Machinery Works Co., Ltd. ECLASS: 36600102 Facts Centre height: 107 mm Base footprint: 134 x 94 mm Weight: 4 kg Special features Suitable for BS lathe series Product type: tailstock Fast dispatch indicated in shop description FAQ Is this tailstock compatible with BS lathes? The Reitstock is specified for the BS lathe series; compatibility depends on bed width and mounting arrangement—refer to the centre height and base footprint for verification. What is the centre height and why is it important? Centre height is 107 mm; it determines how the workpiece axis aligns with the spindle and directly affects concentricity and finish quality during turning. What mounting space is required on the lathe bed? The base footprint is 134 x 94 mm; ensure the lathe bed provides sufficient flat area and clearance for secure placement and any required clamps. How does the tailstock affect machining results? By providing axial support and damping, the tailstock reduces deflection and vibration, which improves surface finish and dimensional repeatability. Is the mass of the unit relevant for stability? At 4 kg, the construction contributes to stability and vibration damping while remaining manageable for positioning and setup. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine repeatable 4° indexing with a compact footprint and robust MT‑3 mounting: the Vertex HV‑10 round indexing table delivers stable handling for small-series machining. Order the table directly via Metav Werkzeuge or consult our specialists for application advice. Vertex HV-10 Round Indexing Table — Horizontal/Vertical, 254 mm diameter HV-10 is a compact round indexing table designed for precision rotary positioning in both horizontal and vertical setups, suited to toolrooms and small production cells. 254 mm working diameter MT‑3 spindle taper 6×14 mm T‑slots for secure fixturing 90 kg horizontal / 50 kg vertical load 4° indexing per spindle revolution Reliable metrology-grade indexing for repeatable setups The rotary workpiece carrier provides precision positioning with a clear mechanical relationship between spindle rotation and angular movement: one spindle revolution equals 4° indexing, allowing predictable stepwise rotation for set-up and inspection tasks. The fine scale division of 10" on the angular reading supports accurate intermediate alignment; operators benefit from repeatable angular indexing that reduces set-up time and scrap rates. This mechanical clarity makes the unit especially valuable where predictable, reproducible orientations are needed for drilling, milling and marking operations. Compact, ready-to-install dimensions that save bench space With a working diameter of 254 mm and compact overall dimensions of 321×276×106 mm, the unit fits neatly onto smaller machine tables and fixtures without compromising accessibility. A low profile height of 109 mm keeps the centre of gravity stable, while a mass of 35.5 kg contributes to steady running and reduced vibration during cuts. The physical stability and measured mass make the rotary table suitable where compactness and rigidity are both required, for instance in toolrooms, prototyping benches or in secondary operations on milling machines. Secure clamping and versatile mounting for multiple setups The top plate includes 6×14 mm T‑slots that allow modular workholding and custom fixture attachments without elaborate adapters, enabling quick clamping of jaws, angle plates or bespoke fixtures. The spindle accepts an MT‑3 taper, a common machine-interface standard that simplifies integration with many vertical and horizontal machines. Combined with the rated capacity of 90 kg horizontal and 50 kg vertical, the unit addresses a range of component sizes while maintaining dependable support in both orientations. Practical benefits for workshop productivity and maintenance Engineered for low-maintenance service life, the rotary table’s straightforward mechanical concept offers predictable behaviour and easy troubleshooting. The simple indexing ratio and visible scale reduce the need for complex digital readouts for many repetitive tasks, accelerating cycle times and simplifying operator training. For workshops seeking an economical route to consistent angular accuracy, the device balances robust mechanical function with ease of use, supporting efficient small-batch production and precise setup operations. For reliable integration and tailored advice on using the Vertex HV‑10 in specific applications, contact Metav Werkzeuge — our Emmerich-based team will advise on setup, fixturing and delivery logistics. Technical data SKU: HV-10 GTIN: 4061905088919 Product: Round indexing table HV-10 (Horizontal/Vertical) Core specifications Diameter: 254 mm Overall dimensions: 321×276×106 mm Height: 109 mm Weight: 35.5 kg Max. load horizontal: 90 kg Max. load vertical: 50 kg T‑slot: 6×14 mm Indexing: 4° per spindle revolution Scale reading: 10" Spindle taper: MT‑3 Features & versions Orientation: Horizontal / Vertical ECLASS: 36600610 Mounting compatibility: MT‑3 taper Compact bench footprint for small workpieces FAQ What maximum load can the table support in horizontal and vertical positions? The Vertex HV‑10 supports up to 90 kg when used horizontally and 50 kg in the vertical orientation, making the HV‑10 suitable for a broad range of small to medium fixtures and workpieces. Which spindle taper is required for mounting the unit? The rotary table uses an MT‑3 spindle taper; the HV‑10 connects directly to common MT‑3 compatible machine spindles and arbor systems. How fine is the indexing and how is it read? Indexing is achieved at a ratio of 4° per spindle revolution, with an angular scale reading marked as 10" for intermediate alignment on the unit. Is the HV‑10 suitable for precise drilling and light milling tasks? Yes, the HV‑10 round indexing table from Vertex is designed for precision rotary positioning and is well suited to drilling, light milling and marking operations in toolrooms and small production runs. What fixture options are available for securing components? The top plate includes 6×14 mm T‑slots to accept standard clamps, jaws and custom fixtures, enabling versatile and repeatable fixturing for various workpiece shapes. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of precision, stable mass and a compact length for reliable slitting operations; the 10 mm slot bar reduces vibration and maintains cutting geometry. Order the VSH-10C directly via Metav Werkzeuge or ask our consultants for compatibility details. VSH-10C 10 mm slot bar — accessory for precision slitting heads (Vertex) The VSH-10C is a 10 mm slot bar designed as an accessory for precision slitting heads, offering stable support and consistent positioning in small-format and industrial slitting applications. Precision 10 mm slot bar Length 210 mm for versatile setup Mass 0.81 kg for stable operation Compatible with precision slitting heads Stable geometry for consistent slitting results The 10 mm cross-section and calculated mass promote a steady centre of gravity that reduces chatter and helps maintain blade alignment during operation. Where repeatability matters, the bar’s dimensions support constant cutting geometry, which in turn improves edge quality and reduces rework. The moderate length of 210 mm is optimised for confined setups and allows straightforward integration into compact machining stations, providing a tangible improvement in process stability without extensive machine alterations. Seamless integration with precision slitting heads Designed as an accessory for precision slitting heads, the component enables fast mechanical coupling and straightforward alignment. The bar’s form factor supports common mounting schemes used in slitting assemblies and is suited to retrofit tasks where exact positioning is required. Clear mechanical compatibility reduces setup time and helps maintain productive uptime, supporting fast tooling changes and minimising process interruptions in both workshop and production-line environments. Operational reliability through mass and balance At 0.81 kg, the slot bar contributes useful inertia that damps undesired vibrations while keeping the assembly light enough for manual handling and quick adjustments. This balance between mass and manoeuvrability means fixtures remain stable during high-precision operations without compromising operator convenience during installation. The product’s design focuses on dependable, repeatable performance, ensuring the accessory assists in maintaining consistent tolerances across batches. Practical applications and workshop benefits Ideal for precision trimming, slotting and fine slitting tasks, this accessory suits toolrooms, small-series production and specialist subcontract machining where space and repeatability are priorities. The compact dimensions and stable behaviour of the component help reduce setup complexity and improve first-pass yields. Specifying a compatible slot bar as part of a slitting system provides measurable advantages in throughput and component quality for operations that demand reliable edge finishes. Contact Metav Werkzeuge for specification matching, delivery options and expert advice on integrating the VSH-10C into existing slitting assemblies — Metav’s specialists in Emmerich are available to assist with technical queries and compatibility checks Technical data Article number: VSH-10C GTIN: 4061905095252 Manufacturer: Vertex Weight: 0.81 kg Length: 210 mm Type: 10 mm slot bar ECLASS: 21040713 Facts SKU: VSH-10C Category: Vertex UID: VSH-10C Special features Accessory for precision slitting head Compact form factor for confined setups Mass optimised for vibration damping Suitable for retrofitting existing assemblies FAQ What is the primary function of the slot bar? The VSH-10C serves as an accessory for precision slitting heads, providing a 10 mm guide bar that improves alignment stability and reduces vibration during slitting operations. Which machines is the bar compatible with? The bar is intended for use with precision slitting head assemblies; compatibility depends on the head’s mounting scheme and can be confirmed against the VSH-10C dimensions and mounting interface. How does the bar affect slitting quality? By adding controlled mass and a stable mounting surface, the bar helps maintain cutting geometry, which supports cleaner edges and more consistent tolerances during repetitive cutting tasks. Is the component suitable for retrofit projects? Yes, the compact 210 mm length and standardised form factor make the item well suited to retrofitting into existing slitting setups where space is limited. What information is provided for procurement and identification? Identification data include the article number VSH-10C and GTIN 4061905095252, which can be used for ordering and stock management. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact component that delivers a secure clamping interface and straightforward compatibility with standard 10 mm profiles; combine reliable fastening, precise fit and rapid procurement via Metav Werkzeuge for uninterrupted workshop workflows. Order the part directly through Metav Werkzeuge or consult the technical team for application guidance. 3412M — Vertex T-slot nut, compatible with 10 mm profiles and M8 threading 3412M is a compact T-slot nut designed for secure fixture in 10 mm T-slots, suitable as a single supply item for machine tables and fixture systems Compatible with 10 mm T-slot profiles M8 thread for secure fastening Compact dimensions 9.7x22x6 mm Supplied as a single item Precise engagement with 10 mm profiles for dependable fixturing The T-slot design offers a consistent mechanical interface that aligns with standard 10 mm slot profiles, ensuring repeatable positioning and reduced setup time. The low-profile, compact geometry (9.7x22x6 mm) minimises interference within assemblies while providing a stable bearing surface for clamping elements. In practice, this results in fewer alignment checks during part changeovers and a more efficient workflow when integrating the nut into modular fixturing systems. Secure M8 fastening that supports reliable clamping forces Threaded engagement is provided by an M8 thread, which is widely used in workshop and industrial fixtures for its balance of strength and accessibility. The internal thread allows conventional bolts or studs to be used without additional adapters, simplifying inventory and assembly processes. As a result, clamping assemblies can be tightened to the required torque using standard tools, delivering consistent holding forces and lowering the risk of slippage under operational loads. Engineered compatibility and supply reliability through a trusted channel Manufactured by Vertex, this component is intended for integration into fixture plates, machine tables and clamping rails where a standard T-slot nut is required. Supplied individually, the item is well suited for targeted replacements or small runs where bulk packs are unnecessary. Procuring the part via Metav Werkzeuge provides access to quality-controlled stock and the specialist know-how of a precision partner, supporting seamless procurement and installation in industrial and trade environments. For application advice or compatibility checks for the Vertex 3412M T-slot nut, contact Metav Werkzeuge to request a fitment recommendation or technical clarification through their sales and consultancy channels Technical Data Article number: 3412M GTIN: 4061905084157 EClass: 21029107 Core dimensions Overall size: 9.7 x 22 x 6 mm Slot compatibility: 10 mm Thread: M8 Features & suitability Type: T-slot nut, single item supply Brand: Vertex Images: technical drawing and product detail available FAQ What slot size is this nut designed for? The item is intended for 10 mm T-slot profiles and provides a standardised interface for fixture systems. Which thread size does the nut accept? The nut features an M8 internal thread suitable for common bolts and studs used in clamping assemblies. Can this part be used as a replacement in existing fixtures? Yes, the Vertex 3412M T-slot nut is designed for straightforward replacement in compatible 10 mm profile systems. Is the product supplied individually or in sets? This entry is supplied as a single item, indicated by the single-item designation for targeted replacements. Where can technical drawings be obtained? Technical drawings and product images are available via the product listing and can be consulted before installation to confirm fitment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of versatile set composition, compact total weight and robust mechanical design to simplify lifting and positioning tasks in the workshop. Order the set directly via Metav Werkzeuge or request tailored advice from our consultants. VSJ-A screw jack set — multi-size mechanical lifting jacks by Vertex A VSJ-A screw jack set designed for precise mechanical lifting and positioning in workshop, maintenance and assembly applications. Multi-size set for varied lifting tasks Robust mechanical design for long service life Compact total weight of 4 kg for easy handling Precision lifting through simple mechanics The set delivers controlled linear movement using a proven screw jack principle: rotary motion converts to axial movement, enabling precise adjustment under load. As a multi-size kit, it includes both larger and smaller jacks suited to different demands, allowing efficient staging of parts during assembly or alignment operations. The mechanical design prioritises repeatable movement and fine adjustability, making the ensemble suitable where exact positioning rather than rapid hoisting is required. Durable design that reduces downtime Mechanical simplicity means fewer wear points and straightforward upkeep. The components are engineered for dependable operation and can be inspected or lubricated without specialist tools, supporting low maintenance regimes and predictable workshop workflows. The set’s compact construction and combined weight of 4 kg make handling and storage uncomplicated, while the solid build supports consistent performance across repeated cycles, contributing to smoother production processes and less unexpected downtime. Practical applications and efficiency gains This screw jack assortment suits maintenance teams, small fabrication shops and equipment installers who require incremental lifting or accurate levelling rather than powered hoisting. Using a dedicated multi-size kit reduces tool swaps and preparation time, delivering a tangible efficiency benefit during repetitive tasks. Combined with Metav’s role as a quality-filtered supplier for the European market, the package supports reliable supply and uncomplicated procurement for trade and industry customers. What the set contains and how it integrates The set composition provides flexibility: 2x VSJ-70A, 2x VSJ-150A and VSJ-1A/2A/3A/4A/5A/6A offer a range of stroke lengths and capacities within one compact kit, simplifying selection for varied applications. The SKU is VSJ-A and the kit is presented as a coherent multi-jack solution that can be combined or used individually depending on the task. For compatibility or integration into existing fixtures, consult the product notes or request specific dimensions from our advisors to match workplace requirements. Contact Metav Werkzeuge for expert guidance on selecting the appropriate jack combination and arranging reliable delivery from Emmerich to your workshop Technical Data Article number: VSJ-A GTIN: 4061905094033 Brand: Vertex Facts Weight: 4 kg Pieces per set: 10 Special features Contents: 2x VSJ-70A, 2x VSJ-150A and VSJ-1A/2A/3A/4A/5A/6A Set design: multiple jack sizes included FAQ What tasks is this jack set intended for? The VSJ-A screw jack set is intended for precise mechanical lifting and positioning tasks in workshops, service and assembly work where controlled linear movement is required. Which items are included in the VSJ-A kit? The kit contains 2x VSJ-70A, 2x VSJ-150A and VSJ-1A/2A/3A/4A/5A/6A, provided as a multi-size set to cover a range of lifting and adjustment needs. Is the set suitable for high-frequency industrial use? The VSJ-A screw jack set features a robust mechanical design that supports regular use; for continuous heavy-duty cycles, consult Vertex specifications to confirm suitability for specific operating profiles. How should the screw jacks be maintained? Routine inspection and lubrication of moving parts will preserve performance in the VSJ-A set; the simple mechanical layout enables maintenance without specialist equipment. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high-strength cast steel construction, 0.01 mm accuracy, and a stable 27.7 kg base for repeatable workholding and inspection results. Order the Vertex VR-1010 angle plate directly via Metav Werkzeuge or ask our consultants for specification support. Vertex VR-1010 Angle Plate — High-strength cast steel, 0.01 mm accuracy The VR-1010 is an angle plate designed for precise workholding and inspection tasks in metalworking and metrology, providing rigid datum surfaces for clamping, layout and measurement operations. High-strength cast steel construction Accuracy down to 0.01 mm Stable 27.7 kg base for vibration control Compact 10 x 10 x 10" footprint Engineered for dependable precision on the shop floor The angle plate delivers repeatable accuracy through finely machined datum faces and a certified 0.01 mm tolerance, making it suitable for inspection benches and precision layout work. The unit’s machined surfaces act as reliable reference planes so measurement processes remain consistent between setups. For applications where positional certainty matters, the rigid design reduces the need for repeated realignment, improving throughput and reducing rework. Robust construction that dampens vibration and maintains alignment Made from high-strength cast steel, the plate’s mass and structure provide natural damping for milling, drilling and inspection tasks. The 27.7 kg mass contributes to a stable base that resists chatter during light machining or clamping operations, helping to protect surface finishes and maintain dimensional integrity. The compact footprint minimises bench space while still offering the rigidity expected from industrial workholding equipment. Practical versatility for clamping, layout and inspection As a solid datum element, the component supports a range of workshop workflows including setup for inspection instruments, jigs and fixtures, and layout marking. The machined faces allow straightforward clamping and fixturing, while the compact, cuboid shape suits both small benchtops and larger metrology tables. Clear material choice and machining tolerances mean the plate integrates easily into quality control routines without additional modification. Contact Metav Werkzeuge for delivery from Emmerich and technical guidance on integrating the Vertex VR-1010 angle plate into production Technical Data Article number: VR-1010 GTIN: 4061905092015 Manufacturer: Vertex Facts Weight: 27.7 kg Accuracy: 0.01 mm Dimensions: 10 x 10 x 10" Special features Material: high-strength cast steel Eclass: 21170130 Category: Vertex FAQ What accuracy can be expected from this angle plate? The Vertex VR-1010 angle plate is specified to an accuracy of 0.01 mm, providing precision suitable for inspection and layout tasks. Is the plate suitable for machining setups as well as measurement? Yes, the high-strength cast steel construction of the VR-1010 offers the rigidity and damping required for light machining setups in addition to metrology applications. How heavy is the angle plate and why does that matter? The unit weighs 27.7 kg; the mass improves stability and vibration damping, which helps to maintain alignment during clamping and light machining. What are the external dimensions of the product? The plate measures 10 x 10 x 10", a compact size that fits standard benches while providing full datum faces for fixturing. Who manufactures this angle plate? The plate is manufactured by Vertex and supplied as the VR-1010 angle plate for industrial workholding and inspection. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust, dimensionally stable clamping for repeatable setups thanks to a high-strength cast steel construction and a deliberate mass of 12 kg; the compact 10×6×8" footprint keeps fixtures accessible while reducing vibration. Order the VR-100 angle plate directly via Metav Werkzeuge or consult our specialists for application advice. VR-100 angle plate by Vertex — high-strength cast steel, 12 kg The VR-100 angle plate is a precision clamping accessory designed for machining and inspection setups, providing a stable 90° reference for fixturing and measurement tasks. High-strength cast steel construction Compact 10×6×8" footprint Mass 12 kg for improved stability Machining and inspection clamping accessory Stable foundation for precise fixturing An angle plate serves as a fixed 90° reference that simplifies setup and reduces alignment effort. The VR-100 combines a high-strength cast steel body with a mass of 12 kg, producing a stable base that dampens vibration and improves repeatability. This stability supports consistent tool paths and probe readings, which in turn reduces scrap and rework; the result is measurable productivity gains in both small-batch and production environments. Durable material engineered for workshop use Constructed from high-strength cast steel, the unit resists deformation under clamping loads and maintains squareness over time. The material choice ensures long-term dimensional stability and low maintenance requirements, making the component a cost-effective investment for busy workshops. The robust design also withstands handling and routine use on machine tables, helping to secure precise results shift after shift. Practical dimensions for versatile applications With a compact 10×6×8" footprint and a controlled mass, the plate is easy to position on benches and machine tables while still providing the inertia needed to reduce chatter during machining. The geometry is suitable for both part set-up and inspection tasks, allowing the plate to function as a fixture datum or measurement reference. Where space is at a premium, the combination of small footprint and solid construction offers a balance between accessibility and stability. Contact Metav Werkzeuge to request detailed specifications, discuss fixture compatibility, or reserve a Vertex VR-100 angle plate from local stock in Emmerich for fast delivery and expert advice Technical Data SKU: VR-100 GTIN: 4061905094088 ECLASS: 21020601 Facts Weight: 12 kg Dimensions: 10×6×8" Materials and features Material: high-strength cast steel Product type: angle plate (clamping accessory) Manufacturer: Vertex FAQ What is the primary use of this angle plate? The VR-100 angle plate is intended as a stable 90° reference for machining set-ups and inspection tasks, supporting repeatable clamping and measurement. Which materials is the plate manufactured from? The VR-100 is made from high-strength cast steel, chosen for dimensional stability and resistance to deformation under clamp loads. How does the weight affect performance? A mass of 12 kg increases inertia, helping to dampen vibration and improve positional stability during machining or probing operations. Can the plate be used on both machine tables and inspection benches? Yes, the compact 10×6×8" footprint makes the plate suitable for positioning on machine tables and benches for both fixturing and measurement tasks. Who manufactures the product and where is it produced? The product is manufactured by Vertex and supplied under the VR-100 designation for industrial clamping applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact clamping solution that fits an 11 mm T-slot and accepts both M8 and M10 studs for flexible fixture design; the combination of small footprint and reliable holding reduces setup time and keeps production flowing. Order or request advice via Metav Werkzeuge for tailored fixture planning and procurement. Step Clamp 6133 — Compact step clamp for 11 mm T-slots (Vertex) A Step Clamp designed for secure workpiece clamping in confined fixtures, compatible with standard M8 and M10 studs and suited to intermittent series production and jobbing shops Compact 28 x 150 x 19 mm design Fits 11 mm T-slot Compatible with M8 and M10 studs Lightweight 0.48 kg for easy handling Secure clamping in confined fixture spaces The small footprint of this clamp is ideal where table space is limited: with 28 x 150 x 19 mm overall dimensions it allows multiple clamps to be placed close together without interfering with tooling. Compatibility with an 11 mm T-slot ensures direct fitment to common machine tables; the compact profile reduces overhang and minimises lever effects, which supports consistent precision during milling, drilling and light milling cycles. The compact form factor is particularly useful for short-run production and tooling racks where repeatable positioning is required. Flexible connection to standard studs for fast reconfiguration Designed to accept M8 or M10 studs, the clamp provides straightforward integration into existing fixture hardware. The dual stud compatibility means fewer specialised fasteners are needed and facilitates quick reconfiguration of clamping layouts. In practice, this reduces downtime between jobs and simplifies inventory of clamping components. For customers working across different machine tables, the ability to switch between the two common stud sizes increases the utility of each clamp in mixed-production environments. Reduced setup time through simple step-profile adjustment The step-profile design enables secure clamping at varying workpiece heights without the need for additional packing or elaborate arrangements. The stepped face allows the clamp to engage workpieces at different levels while maintaining a compact overall height, so set-up sequences become faster and less error-prone. For operators, this translates into fewer handling steps and more predictable cycle times, supporting efficient throughput in both manual and semi-automated processes. Practical handling and consistent workshop performance Weighing 0.48 kg, the clamp combines ease of handling with robust contact area for reliable force transmission. The low mass makes positioning and rapid fixturing straightforward, while the geometry distributes clamping forces to avoid localised deformation of softer workpieces. Supplied under the Vertex designation and identified as SKU 6133, this item suits maintenance, small-batch production and general workshop tasks where dependable, repeatable clamping is required. Contact Metav Werkzeuge in Emmerich for procurement advice on the Vertex Step Clamp 6133 and to discuss optimal clamping configurations for specific workpieces Technical Data Article number: 6133 GTIN: 4061905090479 eClass: 21170107 SKU: 6133 Data Dimensions: 28 x 150 x 19 mm Weight: 0.48 kg T-slot width: 11 mm Special features Bolt compatibility: M8 or M10 Product type: Step clamp Brand: Vertex FAQ What T-slot size does this clamp fit? The clamp is designed for an 11 mm T-slot, allowing direct mounting to machine tables with that slot width. Which stud sizes are supported for fastening? The clamp accepts both M8 and M10 studs, offering flexible attachment options for common fixture hardware. Is this clamp suitable for dense clamping layouts? Yes, the compact dimensions (28 x 150 x 19 mm) make the clamp suitable for dense layouts where multiple clamps must be positioned closely. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise T‑slot compatibility and compact dimensions to streamline fixture setups and shorten machine downtime. The combination of reliable clamping in an 11 mm T‑slot and simple bolt compatibility (M8 or M10) ensures efficient production processes. Order the clamp via Metav Werkzeuge or consult our specialists for tailored advice. Step Clamp — Compact step clamp for 11 mm T‑slot, M8/M10 bolts (Vertex) A Step Clamp for secure fixturing in modular machining tables, designed to fit 11 mm T‑slot systems and accept M8 or M10 fastening bolts. Compact 25 x 100 x 16 mm footprint Fits 11 mm T‑slot systems Compatible with M8 or M10 bolts Lightweight 0.26 kg for easy handling Secure clamping for modular machining tables The Step Clamp is designed to provide consistent, repeatable holding force in modular clamping setups. By matching an 11 mm T‑slot, the clamp aligns with standard machine tables and tooling plates, enabling straightforward installation with either M8 or M10 bolts. This compatibility reduces the need for adapters and supports faster changeovers, contributing to measurable time savings at the workbench while maintaining a stable hold during milling or drilling operations. Space-saving design that simplifies fixture setup With a 25 x 100 x 16 mm footprint and a weight of only 0.26 kg, this clamp minimises occupied table space and is easy to reposition during multi‑operation setups. The compact form factor permits close packing of multiple clamps for small or irregularly shaped parts, improving workpiece accessibility and optimising tool paths. The small mass also makes manual handling and adjustment quicker, reducing setup fatigue during repetitive fixture changes. Versatile step profile for adaptable fixturing The stepped profile allows clamping at different workpiece heights without additional shims, which supports flexible clamping strategies across similar jobs. Because the component accepts both M8 and M10 fasteners, it integrates with a wide range of clamping hardware and modular fixture systems. This adaptability helps to shorten the planning phase for new jobs and increases the versatility of existing tooling inventories, making the clamp a practical choice for workshops prioritising efficiency and modularity. Choose the Vertex Step Clamp through Metav Werkzeuge for dependable T‑slot fixturing; contact Metav Werkzeuge's consultants for specification support and ordering guidance Technical Data Article number: 6123 GTIN: 4061905090691 ECLASS: 21170107 Facts Dimensions: 25 x 100 x 16 mm T‑slot width: 11 mm Weight: 0.26 kg Bolt sizes: M8 or M10 Special features Step clamp design for varied clamping heights Compatible with modular clamping systems Compact footprint for dense fixture layouts FAQ What T‑slot size does this clamp require? The clamp is made for an 11 mm T‑slot, ensuring direct compatibility with standard 11 mm table slots. Which bolt sizes are compatible with the clamp? The Step Clamp from Vertex accepts M8 or M10 bolts, allowing use with common clamping screws and studs. Can the clamp be used for different workpiece heights? Yes, the step profile enables clamping at varying heights without additional shims, improving setup flexibility. What are the physical dimensions and weight of the clamp? Dimensions are 25 x 100 x 16 mm and the weight is 0.26 kg, helping to save table space and ease handling. Is the Step Clamp suitable for dense fixture arrangements? Its compact footprint and step design make it well suited for dense or multi‑clamp configurations in modular setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of compact design, compatibility with standard clamping pins and fast fixture set-up for reliable machining results. Benefit from Vertex quality and secure your components through Metav Werkzeuge or consult our specialists for application advice. Step Clamp Vertex – Compact clamp for t-slot 11 mm, M8/M10 compatible Step Clamp designed for modular fixturing in milling and drilling applications, compatible with 11 mm t-slots and standard M8 or M10 clamping pins. Compact step clamp for t-slot 11 mm Compatible with M8 or M10 clamping pins Lightweight construction, approx 0.11 kg Precision-made by Vertex for repeatability Faster set-ups thanks to compact, standard-compatible design The Step Clamp delivers a practical balance between size and functionality. With a t-slot 11 mm compatibility and support for M8 or M10 pins, the component integrates directly into common clamping rails and fixture plates, reducing the need for bespoke adaptors. The compact footprint (25 x 64 x 12 mm) and low mass (0.11 kg) allow quicker repositioning and minimise inertia during manual handling. This translates into shorter set-up times and fewer interruptions on the shop floor, supporting a smoother production flow. Reliable clamping and repeatable results for serial work Manufactured by Vertex, the clamp is engineered to provide secure step-style positioning that helps maintain consistent workpiece height across batches. The step profile enables defined vertical adjustment without incremental shimming, which improves repeatability and reduces the potential for setup error. For workshop environments where small tolerances and steady throughput are required, the clamp’s straightforward mechanical function contributes directly to process reliability and reduced rework. Practical inventory and integration benefits for busy workshops The compact dimensions and compatibility with standard clamping bolts simplify stock management and fixture planning. Keeping a set of these clamps reduces the variety of specialised clamps required, enabling flexible fixture builds with fewer individual parts. Supplied as a single, ready-to-install element (SKU 6113), the component fits into modular fixturing systems and is particularly suited to small to medium-sized milling and drilling operations that favour rapid changeovers and lean inventory. Contact Metav Werkzeuge to secure Vertex clamping components for precise fixturing and request tailored application advice from our consultants in Emmerich Technical data Article number: 6113 GTIN: 4061905084027 Brand: Vertex Dimensions: 25 x 64 x 12 mm Weight: 0.11 kg T-slot compatibility: 11 mm Compatible with M8 or M10 clamping pins Compact step profile for vertical adjustment Suitable for modular fixture systems FAQ What t-slot size does the clamp fit? The clamp is designed for an 11 mm t-slot and integrates with standard 11 mm rails. Which clamping bolts are compatible with this clamp? Compatible clamping bolts are M8 or M10; the clamp accepts both sizes for flexible fixture design. What are the dimensions and its impact on fixture layout? Dimensions are 25 x 64 x 12 mm, allowing compact placement and close packing on fixture plates where space is limited. Is the clamp supplied ready to install? The component (SKU 6113) is supplied as a ready-to-install clamp for immediate integration into modular systems. How does the clamp support repeatability in serial production? The step profile provides defined vertical positioning that reduces the need for shims, which helps maintain consistent workpiece heights across multiple set-ups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Compact locking and fast integration are delivered by the combination of 11/16" T-slot compatibility, compact dimensions and dual-thread attachment; the result is reliable clamping with minimal setup time. Order the T-slot directly via Metav Werkzeuge or ask our consultants if needed. T-slot (single) – 11/16" T-nut, compact 1-1/8×1-1/4×3/4" (Vertex) The T-slot is a compact fixturing component intended for milling and drilling tables where an 11/16" T-nut is required, enabling secure workholding in confined setups. Compact 1-1/8×1-1/4×3/4" format Fits 11/16" T-slot Dual thread sizes: 1/2-12" & 1/12-13" Sold individually for flexible stocking Precise fixturing where space is limited For applications that demand accurate positioning without excess bulk, this component offers compact dimensions that reduce interference on the machine table while maintaining clamping strength. Compatibility with an 11/16" T-slot means the part integrates directly with many standard fixture systems used in shop and production environments. The modest footprint lessens the need for extensive repositioning of adjacent tooling, which shortens set-up times and improves repeatability — key advantages for batch work and frequent changeovers. Fast integration with common thread patterns The dual threads supported by the item enable rapid connection to a wide range of studs and clamping accessories. The specified 1/2-12" and 1/12-13" thread formats correspond to standard imperial fastenings commonly encountered in fixturing hardware, simplifying procurement and spare-part planning. For users unfamiliar with imperial thread nomenclature: the numbers denote the major diameter and thread count, so matching the correct stud ensures secure engagement and consistent clamping force. This compatibility reduces the need for adapters and streamlines assembly. Designed for dependable workshop use A low unit mass of 0.087 kg makes handling and placement straightforward during rapid set-ups, while the single-item supply model supports targeted stocking strategies for maintenance and production teams. Built under the Vertex range, the component is suitable for integration into existing clamping systems where compact, repeatable fixturing is required. Combined with Metav Werkzeuge’s supply chain from Emmerich, the part contributes to uninterrupted workshop operation by reducing lead times and simplifying ordering. Contact Metav Werkzeuge for tailored advice on the Vertex T-slot (SKU 3434I) and secure reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 3434I GTIN: 4061905093937 Brand: Vertex Weight: 0.087 kg Dimensions (L×W×H): 1-1/8×1-1/4×3/4" Core measurements T-slot size: 11/16" Threads: 1/2-12" and 1/12-13" Eclass: 21029107 Special features Sold individually Type: T-slot item Category: Vertex FAQ Which T-slot size does this component fit? The component is designed for an 11/16" T-slot, making it compatible with many standard milling and drilling table profiles. What thread options are available for attachment? This item features two thread specifications listed as 1/2-12" and 1/12-13", allowing use with common imperial studs and clamping hardware. Is the part suitable for frequent set-ups and repositioning? Yes; the compact form factor and low weight of the component support rapid repositioning and frequent changeovers without adding significant mass to the fixture. Can this be stocked individually for small workshops? The part is supplied sold individually, which supports selective stocking and targeted replacement strategies. Which SKU identifies this item for ordering? Order using SKU 3434I, listed under the Vertex range for straightforward procurement. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining a precise fit for 11/16" T-slots, a secure 5/8-11 thread, and a lightweight 0.087 kg body, the fastener delivers dependable clamping with low handling effort. Take advantage of this compact, accurate solution for repeatable setups; order directly via Metav Werkzeuge or consult their specialists for application advice. T-slot nut 3415I — 11/16" T-slot, 5/8-11 thread (Vertex) A compact T-slot nut designed for secure clamping on machine tables and fixtures, suitable for standard 11/16" T-slots. Robust 5/8-11 thread connection Fits 11/16" T-slots Lightweight 87 g mass Reliable clamping that stabilises setups The T-slot nut 3415I provides a secure mechanical interface between clamping hardware and machine tables. The 5/8-11 thread is a widely used imperial thread form that ensures strong, repeatable engagement with standard clamping bolts. In practice, this means fewer retightening cycles and improved process stability during machining or assembly operations. The component is engineered for precision positioning in the T-slot, reducing lateral play and improving fixturing accuracy for short-run and repetitive tasks. Compact dimensions for flexible handling and fast changeovers With overall dimensions of 1-1/8 x 1-1/4 x 3/4" and a low mass of 0.087 kg (87 g), the form factor minimises interference with adjacent fixtures and reduces inertia during handling. The modest size supports tight workpiece layouts while still providing a robust contact area for clamping forces. The nut’s geometry is optimised for insertion into an 11/16" T-slot, allowing quick placement and repositioning on standard tables; this facilitates efficient setup procedures and shorter machine downtime between jobs. Durable design for consistent performance across cycles Designed as a single unit for general fixturing applications, the fastener offers a straightforward, maintenance-free solution for routine workshop use. The compact fastener supports stable clamping without introducing excess bulk to the work envelope, contributing to repeatable setups and consistent production quality. Where interchangeability and reliable mechanical engagement are required, the component delivers a balance of convenience and functional robustness suitable for a broad range of industrial workshop contexts. Choose the Vertex 3415I for dependable table fixturing and contact Metav Werkzeuge in Emmerich for tailored advice and fast supply: info@metav-werkzeuge.com | +49 2822 7131930 Technical data SKU: 3415I GTIN: 4061905093944 Designation: T-slot nut, single unit Core specifications Dimensions: 1-1/8 x 1-1/4 x 3/4" Thread: 5/8-11" T-slot size: 11/16" Weight: 0.087 kg Features Sold individually ECLASS: 21029107 Category: Vertex FAQ Which T-slot size does this nut fit? The fastener fits an 11/16" T-slot; the geometry is intended for standard 11/16" machine table slots. What thread does the nut use? The component features a 5/8-11" thread, a common imperial thread form for clamping hardware. Is the item sold as a single piece? Yes — the product is supplied as a single unit under SKU 3415I. What are the main dimensions and weight? Overall dimensions are 1-1/8 x 1-1/4 x 3/4" and the weight is 0.087 kg (87 g). Who manufactures the component? The fastener is produced by Vertex; the SKU 3415I is part of Vertex’s range of T-slot clamping hardware. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

The combination of a robust 3/8-16 threaded connection and a compact 11/16 x 1" outer dimension delivers secure, repeatable joins while keeping handling effort minimal; benefit from reduced changeover times and consistent tool alignment. Order the coupling directly via Metav Werkzeuge or consult our advisers for integration advice. Vertex 2613I coupling — precision 3/8-16 threaded connector, 11/16 x 1" A Vertex 2613I coupling engineered to provide a secure mechanical connection where a compact threaded interface is required in workshop and machining setups. Quick-lock 3/8-16" threaded connection Compact 11/16 x 1" outer dimension Lightweight construction, approx. 0.035 kg Secure and efficient tool connections that reduce downtime The 3/8-16 threaded interface ensures a standardised mechanical join compatible with a wide range of fixtures and toolholders. Threaded connections transfer torque and axial loads reliably; the defined 11/16 x 1" outer dimension provides a consistent seating surface for alignment. For procurement and inventory, the coupling appears under the SKU and GTIN identifiers to simplify ordering and traceability. Using a standardised connector reduces setup time and the risk of misalignment that can lead to rejects or rework, delivering measurable improvements to process efficiency. Compact design that eases handling and improves balance The compact form factor and lightweight nature of the coupling lower the rotating mass introduced into an assembly, which can reduce vibration and thermal drift during operation. At approximately 0.035 kg, the component is easy to manoeuvre during assembly and changeovers, contributing to safer and faster handling on the workbench. Reduced mass also benefits dynamic systems where inertia and balance affect cycle time and tool life; the compact profile supports tight installation spaces without compromising mechanical engagement. Ready for integration into many workshop setups Identified by SKU 2613I, the coupling suits applications requiring a standard 3/8-16 threaded connection and a compact outer dimension. The product is useful where a repeatable mechanical interface is needed between hand tools, jigs or machine-mounted adapters. The straightforward geometry simplifies inspection and replacement procedures; compatibility with established threads and dimensions makes it straightforward to specify in bills of materials and CAD assemblies. Clear identification supports purchasing and stock management. Confidence through consistent supply and technical transparency Sourcing via an experienced distributor gives access to technical drawings and detail imagery to support installation and QA processes. Supplied product documentation aids engineers in verifying fit and function before integration, and consistent labelling helps with batch control and traceability. Working with a partner that functions as a quality filter for the European market reduces the logistical complexity of obtaining precision workshop components and supports steady production planning. Contact Metav Werkzeuge today to specify the Vertex 2613I coupling for procurement or to request additional technical documentation via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2613I GTIN: 4061905087059 ECLASS: 21131711 Facts Dimensions: 11/16 x 1" Thread: 3/8-16" Weight: 0.035 kg Special features Designation: Coupling Brand: Vertex Images: technical drawing, detail image, main image FAQ What thread standard does this coupling use? The coupling uses a 3/8-16 threaded connection, specified on the Vertex 2613I for compatibility with standard 3/8-16 fittings. How large is the coupling and will it fit restricted spaces? The outer dimension is 11/16 x 1", giving a compact envelope suitable for installations with limited clearance. Is the weight significant for rotating assemblies? At approximately 0.035 kg the coupling introduces low rotating mass, which helps to limit additional inertia in sensitive assemblies. How can the product be identified for ordering? Use SKU 2613I or GTIN 4061905087059 when placing orders or updating bills of materials. Are there technical drawings available for installation checks? Technical drawing and detail images are provided to support verification of fit and integration procedures for the Vertex 2613I coupling. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a robust, dust-protected inspection lamp that combines IP67 protection at the lamp head with an IP65 arm, flexible positioning via a single-joint arm, and broad voltage compatibility for straightforward integration into varied workshop installations — order the VHL-300SR directly via Metav Werkzeuge or ask our consultants if needed. VHL-300SR Halogen inspection lamp by Vertex — dust-protected, IP67 lamp head and IP65 arm The VHL-300SR is a halogen inspection lamp designed for precision workshops, inspection benches and maintenance stations where reliable, focused illumination and rugged protection are required. Dust-protected lamp head for harsh environments IP67-rated lamp head and IP65-rated arm Flexible single-joint arm for precise positioning 1.8 m supply cable included Reliable illumination where measurement precision matters A robust light source is essential for visual inspection and fine assembly. The VHL-300SR uses a halogen bulb format compatible with 50/55/70 W lamps, delivering a consistent, high-contrast beam well suited to close-range inspection tasks. The unit’s dust-protected construction and the IP67 rating at the lamp head ensure that the optical components remain free from particulate contamination, reducing the need for frequent cleaning and maintaining consistent visual conditions for quality control. This stability supports efficient, repeatable inspection processes and minimises downtime due to maintenance. Durable design that adapts to workshop infrastructure Built for everyday industrial use, the lamp head is rated IP67 while the articulated support is rated IP65, providing a clear separation between the light source’s ingress protection and the arm’s mechanical resilience. The single-joint arm allows quick, precise alignment of the beam without complex adjustment procedures, helping technicians position the light with one hand while working. Multiple supply options (110/220/380/24V) permit direct integration into different electrical systems without the need for additional transformers, simplifying installation across varied production lines and inspection benches. Practical setup and service benefits for production environments Installation and routine handling are simplified by the inclusion of a 1.8 m cable, which provides immediate connectivity to nearby power supplies. The lamp’s compact form and modest mass (approximately 2.9 kg) make it straightforward to mount and reposition on inspection rigs or benches. Compatibility with standard halogen wattages (50/55/70 W) reduces stocking complexity for spare bulbs and keeps servicing predictable. The result is a lighting solution that supports long operating periods and predictable maintenance cycles, enabling a smooth workflow in small and medium-sized workshops. Why this lamp supports quality-focused teams Manufactured by Vertex, the unit combines traditional halogen colour rendering with robust ingress protection so that visual inspection benefits from natural contrast and true colour representation. For teams focused on precision work, the configuration reduces the likelihood of visual errors and contributes to consistent product quality. The lamp’s straightforward technical concept—standard bulb sizes, clear IP classification and an articulated support—translates into reliable, measurable advantages for inspection, assembly and repair tasks. Discuss the Vertex VHL-300SR with Metav Werkzeuge to confirm the best voltage option and mounting arrangement for specific applications — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: VHL-300SR GTIN: 4061905091100 Manufacturer: Vertex Numerical data Weight: 2.9 kg Voltage options: 110/220/380/24V Compatible bulb wattages: 50/55/70 W Materials & special features Lamp type: halogen Protection: Lamp head IP67, Arm IP65 Arm: 1 joint Accessories included: 1.8 m cable FAQ How is the VHL-300SR protected against dust and water? The Vertex VHL-300SR has an IP67 rating at the lamp head and an IP65 rating on the arm, meaning the head is dust-tight and protected against temporary immersion while the arm is protected against dust and low-pressure water jets. Which bulbs can be used with this inspection lamp? Standard halogen bulbs of 50/55/70 W are suitable for use with this inspection lamp; these common wattages simplify spare-part management and replacement. Can the lamp be connected to different supply voltages? Yes — the VHL-300SR supports 110/220/380/24V supplies, allowing straightforward integration into various electrical systems without additional converters. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise indexing, a compact footprint and robust load capacity for reliable small-part machining — order directly via Metav Werkzeuge or contact our specialists for tailored advice. Vertex HV-4 rotary dividing table — MT-2 taper, 110 mm diameter The Vertex HV-4 rotary dividing table is a compact horizontal/vertical indexing unit engineered for precise part orientation and flexible fixture mounting in small workshops and toolrooms. 110 mm diameter working face MT-2 spindle taper for common tooling Horizontal and vertical indexing capability Max load 35 kg horizontal, 18 kg vertical T-slots 3x11 mm for flexible fixturing Repeatable positioning for routine precision The HV-4 provides dependable repeatable positioning through its geared spindle, which delivers 4° per spindle revolution and a scale division of 20", enabling consistent indexing for series work. The geared indexing is particularly suited to tasks where fixed-angle steps are needed; the mechanism reduces the need for continuous measurement and speeds up setup times. Where finer increments are required, the clear scale and robust spindle let operators verify alignment quickly, maintaining production pace while ensuring conformity to drawing tolerances. This combination of measurable increments and solid mechanical guidance supports predictable throughput and lowers the risk of rework. Small footprint with substantial load capacity Despite a compact footprint, the unit offers a 110 mm diameter working face and a solid support structure that keeps tools and workpieces stable during light machining operations. With an overall weight of 7 kg and external dimensions of 138 x 118 x 58 mm, the component can be integrated onto benchtop fixtures or small rotary setups without dominating the workspace. Load ratings of 35 kg horizontal and 18 kg vertical mean the table accommodates a wide range of small assemblies and fixtures while preserving positional stability, which is crucial when milling, marking or indexing successive holes. The compact design reduces wasted bench space while maintaining the rigidity expected in daily workshop use. Built for compatibility and flexible mounting Mounting and tooling compatibility have been prioritised: the HV-4 features an MT-2 taper spindle and three T-slots 3x11 mm, allowing straightforward attachment of common tooling, chucks and bespoke fixtures. The dual-orientation design (horizontal/vertical) increases application flexibility, so the same unit can be reconfigured for different setups without elaborate retooling. The short overall height of 72 mm and standardised spindle interface simplify integration with existing machines or jig systems. For workshops that value quick changeovers and multi-task capability, this indexing table supports a variety of light machining and assembly tasks while keeping changeover times low. For precision indexing from a trusted brand, consider the Vertex HV-4 and contact Metav Werkzeuge for availability, delivery options and application advice: info@metav-werkzeuge.com — +49 2822 7131930 Technical data Article number: HV-4 GTIN: 4061905083266 Brand: Vertex EClass: 36600610 Facts Diameter: 110 mm Height: 72 mm External dimensions: 138 x 118 x 58 mm Weight: 7 kg Max load: 35 kg horizontal; 18 kg vertical Spindle indexing: 4° per spindle revolution Scale division: 20" T-slots: 3 x 11 mm Special features Spindle interface: MT-2 Orientation: Horizontal / Vertical Compact, workshop-oriented construction Suitable for bench mounting and small fixtures FAQ What spindle taper does the unit use? The Vertex HV-4 uses an MT-2 spindle taper for compatibility with standard tooling and arbors. What are the maximum permissible loads? Permissible loads are 35 kg when mounted horizontally and 18 kg in vertical orientation for the HV-4 rotary dividing table. How fine are the indexing steps? Indexing is driven at 4° per spindle revolution with a scale division shown as 20", providing clear, repeatable steps for many workshop tasks. Can the table be used both horizontally and vertically? Yes. The HV-4 is designed for both horizontal and vertical operation, increasing fixture and process versatility. Is the unit suitable for bench-mounted fixtures in a small workshop? The compact dimensions and 3 x 11 mm T-slots of the HV-4 make it well suited for bench-mounted fixtures and small toolroom applications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, swivelable indexing solution with a 110 mm diameter and 4° positioning increments for repeatable angular set-ups; order the unit directly via Metav Werkzeuge or ask our consultants for tailored integration advice. Vertex VU-100 – Swivelable indexing rotary table, 110 mm working diameter The Vertex VU-100 is a compact indexing rotary table designed for precise angular positioning in small-part machining and fixture work. Swivelable indexing mechanism 110 mm working diameter 4° per spindle rotation Robust 13.5 kg base weight Accurate indexing that shortens set-up times The VU-100 delivers 4° indexing, which means each full spindle rotation moves the table by a defined angular increment, enabling reliable repeatability for series work. This indexing rotary table simplifies multi‑angle operations by removing the need for manual marking or frequent re‑clamping, translating into measurable time savings on set-up and consistent part quality. The mechanism is designed to provide stable angular stops that support fast changeovers in toolrooms and small production cells. Stable, compact footprint for workshop environments With a 110 mm diameter working face and compact external dimensions of 228 x 177 x 117 mm, the unit occupies minimal bench or machine table space while maintaining stability thanks to a 13.5 kg mass. The weight contributes to vibration damping and steadier cutting behaviour, which is particularly beneficial when machining small or delicate components. The small footprint eases integration into existing jigs and reduces the need for large fixtures, supporting a neater, more efficient workplace layout. Swivel function for flexible machining angles The swivelable design allows angular adjustments beyond simple indexing, opening up tasks such as angled drilling, milling of bevels, and precise orientation for assembly operations. The combination of indexed rotation and swivel capability provides flexibility when alternating between radial and angular work, reducing the number of dedicated fixtures required. This versatility supports both prototyping and batch production by enabling a greater range of operations on a single fixture. Designed for reliable integration and durable use Produced by Vertex, the VU-100 is engineered for routine use in industrial and craft environments where predictable performance matters. The robust construction and defined indexing steps facilitate straightforward integration into manual and semi‑automated processes. Clear mechanical indexing reduces reliance on digital control for simple angular tasks, offering a low‑complexity solution that complements CNC and manual machining alike while helping maintain consistent throughput. For compact, repeatable indexing with the Vertex VU-100, contact Metav Werkzeuge to arrange supply and technical advice via info@metav-werkzeuge.com or by calling +49 2822 7131930 Technical data SKU: VU-100 GTIN: 4061905084782 eClass: 21020590 Manufacturer: Vertex Core dimensions & weights Diameter: 110 mm External dimensions: 228 x 177 x 117 mm Weight: 13.5 kg Index per spindle rotation: 4° Features & compatibility Parts carrier rotary table Swivelable design Compact workshop footprint Suitable for fixture integration FAQ What precision does the indexing provide? The VU-100 offers 4° indexing, enabling consistent angular positioning for repeatable machining and assembly tasks. Can the unit be integrated into existing fixtures? Yes, the VU-100 is designed for straightforward fixture integration thanks to its compact dimensions (228 x 177 x 117 mm) and robust base weight (13.5 kg) which provide stability during machining. Is the swivel function suitable for angled drilling and milling? The swivelable design of the VU-100 supports angled operations such as drilling and milling of bevels, reducing the need for multiple dedicated fixtures. Which manufacturer produces this rotary table? The indexing rotary table is produced by Vertex; the model is listed as VU-100 and is intended for workshop and small production use. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combining a cast-iron body with a 1200 kgf clamping force and repeatable accuracy to 0.01 mm, the tilting milling vice delivers steady, vibration-resistant workholding for precision machining. Order the unit directly via Metav Werkzeuge or consult our technical team for specification support. VWT-4B Vertex tilting milling vice — cast-iron, 1200 kgf clamping force The VWT-4B is a tilting milling vice engineered for secure workholding in machine shops and toolrooms, suitable for operations where accurate clamping and angular flexibility are required Robust cast-iron body for stable clamping High clamping force: 1200 kgf Jaw opening 0–220 mm for versatile workpieces Precision repeatability to 0.01 mm Consistent precision for demanding milling tasks The vice combines a cast-iron construction with finely machined guideways to deliver reliable precision on every job. With a repeatability rated at 0.01 mm and a substantial 1200 kgf clamping force, it secures workpieces against chatter and tool deflection, translating machining parameters into predictable results. This level of control benefits setups that require tight tolerances, reducing rework and increasing first-pass yield while maintaining a straightforward rigging process. Flexible angles and efficient part handling Featuring a tilting function and a jaw opening of 0–220 mm, the design allows angled milling and varied part sizes without extensive fixturing changes. The compact footprint (110 x 240 x 230 mm) and moderate mass help to integrate the vice into milling tables and smaller machining centres where space is at a premium. Quick angle adjustments save setup time and support smoother production flow, providing tangible gains in throughput for batch work and one-off prototypes alike. Built to last with predictable uptime Durability is engineered into the vice through material choice and sound mechanics: robust cast-iron mass dampens vibration, while the construction supports stable clamping over repeated cycles. Weighing 33.3 kg, the unit offers a stable base that contributes to cutting accuracy across the workpiece. Regular, simple maintenance preserves repeatability and minimises downtime, so workshop schedules stay on track and tooling investment delivers long-term value. Secure the Vertex VWT-4B via Metav Werkzeuge for dependable precision and angular flexibility; for technical questions or a detailed spec sheet contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: VWT-4B GTIN: 4061905083402 ETIM: EC002173 ECLASS: 21020601 Facts Clamping force: 1200 kgf Jaw opening: 0–220 mm Accuracy: 0.01 mm Weight: 33.3 kg Dimensions: 110 x 240 x 230 mm Special features Material: cast iron Version: tilting milling vice Manufacturer: Vertex FAQ What materials can be machined with this vice? The vice is a general-purpose workholding device; the Vertex VWT-4B tilting milling vice is suitable for securing metal and non-metal workpieces that fit the jaw opening and fixture requirements. How precise is the clamping repeatability? Repeatability is specified at 0.01 mm for the tilting milling vice, enabling consistent positioning across multiple setups and parts. What range of jaw opening is available for clamping? The jaws open from 0 to 220 mm, accommodating a broad range of component sizes without additional adapters. Is the vice stable under heavy cutting forces? With a clamping force of 1200 kgf and a cast-iron body, the VWT-4B provides stable workholding for many milling operations that require high clamping pressure. How large is the unit and how much does it weigh? The vice measures 110 x 240 x 230 mm and weighs 33.3 kg, offering a compact yet solid footprint for many machine tables. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of high repeatability (0.01 mm), a 15-piece ER-40 collet set and a compact footprint for stable, efficient fixturing on milling machines; order the unit directly via Metav Werkzeuge or consult our specialists if clarification is required. VUA-ER40 Angle Plate with 112 mm diameter and 15-piece ER-40 collet set — Vertex The VUA-ER40 is an angle plate designed to provide secure part fixturing and repeatable clamping for workshop and light production machining tasks. 112 mm diameter for stable clamping 15-piece ER-40 collet set included Precision manufacturing with 0.01 mm accuracy Max load 15 kg for heavy-duty fixturing Engineered for reliable workshop fixturing and repeatability The clamping assembly is engineered to deliver consistent positioning and rigid support for small- to medium-sized components. With a 112 mm diameter contact face and a robust construction, the fixture resists deflection under load, helping to maintain machining tolerances. The documented 0.01 mm accuracy reflects the manufacturing standard of the component and provides a verifiable basis for quality-critical operations. As a consequence, set-up times are reduced and the risk of rework is lowered, supporting steady production throughput. Integrated ER-40 collet set for flexible mounting of workpieces Included with the angle plate is a 15-piece ER-40 collet set, covering a wide range of shaft and tool diameters (4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25, 26 mm). The collection of collets enables direct gripping of turned parts, mandrels and tooling without additional adapters, which simplifies fixturing and reduces ancillary inventory. ER-40 is an established clamping standard; its high clamping force and concentricity make it suitable for operations where runout and concentricity matter. Precision and stability that support productive machining Mass and geometry contribute to stability: the assembly weight of 14 kg and compact dimensions (180 x 110 x 181 mm) create a low centre of gravity and minimise vibration transfer during cutting. The clearly defined max. load of 15 kg guides selection for heavier workpieces while preserving positional accuracy. These measurable characteristics help planners and machine operators compare fixtures objectively and choose the right tool for specific machining tasks. Streamlined procurement and workshop integration Supplied as a complete set, the angle plate plus collet assortment reduces the need for multiple separate purchases and simplifies shelf stocking. The configuration is particularly suitable for job shops and maintenance departments that require quick reconfiguration between jobs and reliable repeatability across batches. Availability through Metav Werkzeuge adds the assurance of European distribution and quality control from the Emmerich facility, helping to shorten lead times and ensuring parts are delivered under a consistent quality filter. Request the VUA-ER40 from Metav Werkzeuge for delivery from Emmerich, or contact our consultants via info@metav-werkzeuge.com or +49 2822 7131930 for application advice and configuration support Technical Data Article number: VUA-ER40 GTIN: 4061905083761 Manufacturer: Vertex Facts Dimensions: 180 x 110 x 181 mm Diameter: 112 mm Weight: 14 kg Accuracy: 0.01 mm Max. load: 15 kg Special features Set: 15x ER-40 collets (4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25, 26) Designed for fixturing and precise part clamping Compact footprint for flexible machine mounting FAQ What collet sizes are included with the set? The set contains 15 ER-40 collets in the following sizes: 4, 5, 6, 8, 10, 12, 13, 15, 16, 18, 20, 21, 22, 25 and 26 mm, supplied as a complete ER-40 collet set. Can the assembly handle larger workpieces? The angle plate is rated for a maximum load of 15 kg; for heavier components a dedicated heavy-duty fixture should be selected to maintain the specified accuracy. What level of positioning accuracy can be expected in practice? The component is manufactured to an accuracy of 0.01 mm, providing high repeatability for precise machining tasks when used with appropriate set-up procedures and machine capabilities. Is the VUA-ER40 suitable for production or only for workshop use? The VUA-ER40 is suitable for both workshop and light production environments where compact, repeatable fixturing and the included ER-40 collet range meet the application requirements. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of a compact, precisely fitted solution that matches 12 mm T-slots and secures with an M10 thread for consistent fixturing. The single-piece design reduces setup variability and supports a smooth production flow; order this T-slot insert directly via Metav Werkzeuge or consult our specialists for application advice. T-slot insert 3423M by Vertex — 12 mm T-slot, M10 thread T-slot insert 3423M is a compact fixing element for machine tables and fixtures, designed to fit 12 mm T-slots and to be secured with an M10 threaded fastening Fits 12 mm T-slots M10 threaded fastening Single-piece construction Compact dimensions 11.7 x 22 x 7 mm Faster, more reliable set-ups through precise fit A precisely dimensioned 12 mm T-slot interface combined with an M10 thread ensures the insert locates and clamps without guesswork, shortening set-up times and reducing rework. The compact footprint (11.7 x 22 x 7 mm) provides a snug engagement in standard T-slots so that alignment is preserved between cycles. For engineering teams pursuing repeatability, the result is consistent part positioning and fewer interruptions in the production chain. Secure clamping that improves process stability The single-piece construction removes joints and mating tolerances that can introduce play, delivering a secure anchorage for fixtures and stop elements. Using an M10 threaded fixing gives dependable clamping force while allowing straightforward replacement or repositioning when fixture layouts change. These attributes translate into measurable operational benefits: reduced downtime during changeovers and improved component tolerances through stable fixturing. Compact design for versatile fixture layouts Small overall dimensions and a low profile make this insert suitable for dense fixture arrangements and retrofits on existing machine tables. The compact form allows tighter packing of clamping points without sacrificing stability, enabling designers to create more flexible and space-efficient fixturing solutions. Sourcing from an established brand contributes to consistent part-to-part quality and predictable behaviour in daily shop-floor use. Contact Metav Werkzeuge for tailored advice on Vertex T-slot inserts and to secure supply from our Emmerich quality hub Technical data SKU: 3423M GTIN: 4061905086793 ECLASS: 21029107 Core specifications Dimensions: 11.7 x 22 x 7 mm T-slot compatibility: 12 mm Thread: M10 Design & special features Single-piece design Intended for T-slot fixturing Brand: Vertex FAQ Which T-slot size does the insert suit? The insert is specified for 12 mm T-slots; the 3423M by Vertex matches standard 12 mm slot systems. What mounting thread is used for fastening? Mounting is via an M10 thread, providing a secure and widely compatible fastening option for fixtures. Is the material of the insert stated? Material is not specified in the provided product data for the 3423M T-slot insert; consult Vertex documentation for material and mechanical properties. Can the insert be used for dense fixture arrangements? Yes, the compact dimensions (11.7 x 22 x 7 mm) and low profile make the insert suitable for tight fixture layouts and retrofits. How does the single-piece construction benefit fixturing? Single-piece construction reduces tolerance stack-up and potential play, yielding more stable clamping and better repeatability in production setups. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of the combination of robust clamping force, large working surface and selectable indexing for reliable, repeatable positioning in heavy-duty production. Order the unit directly via Metav Werkzeuge or contact our consultants for application-specific advice. VIT-1200-5 Precision indexing table by Vertex — 1200×1200 mm, selectable 1°/5° indexing The VIT-1200-5 is a precision indexing table designed for heavy-duty positioning and fixture work in machining and production environments; the unit combines a large top plate with high clamping force for stable, repeatable operations Large 1200×1200 mm top plate High clamping force: 8100 Kgs 22 mm T-slots for secure fixturing Indexing selectable: 1° or 5° Rotates clockwise and anticlockwise Stable, heavy-duty support for demanding setups The indexing table delivers a 1200×1200 mm working surface that accommodates substantial jigs and multiple fixtures while its considerable mass of 2000 kg provides inherent stability against cutting forces. With a clamping force of 8100 Kgs and 22 mm T-slots, the unit ensures secure workholding for a wide range of setups. These characteristics reduce vibration and positional drift, which in turn preserves tool life and improves final part quality. The 340 mm mounting height integrates with standard machine beds and workstations without exotic adapters. Precise, selectable indexing for repeatable cycles Designed for controlled rotary positioning, the table offers selectable indexing at 1° or 5°, enabling coarse or fine step positioning depending on the application. The mechanism supports rotation both clockwise and anticlockwise, which simplifies programme logic and fixturing strategies on multi-axis cells. With an accuracy class 3, the device provides a reliable baseline for repeated operations where angular precision and repeatability are required, shortening setup times and improving throughput in batch manufacturing. Practical integration and long-term reliability The rotary top is engineered for continuous use in production environments and is compatible with common fixturing systems via the 22 mm T-slots. The ability to index in both directions and the robust clamping capability make the table suitable for sequential machining, inspection and assembly stages where positional security matters. The construction and specification focus on operational uptime and consistent performance; supplied through Metav’s European quality filter, the unit benefits from a dependable logistics and spare-parts approach that supports sustained production life. Contact Metav Werkzeuge to discuss how the Vertex VIT-1200-5’s large top plate and 8100 Kgs clamping force can be configured for specific machining or inspection processes and to arrange technical consultation Technical data SKU: VIT-1200-5 GTIN: 4061905092893 Model designation: Precision indexing table eClass: 36600310 Dimensions & measured values Top plate dimensions: 1200×1200 mm Height: 340 mm Mass: 2000 kg T-slot width: 22 mm Clamping force: 8100 Kgs Indexing resolution: 1° or 5° Accuracy: class 3 Special features & functions Table rotates clockwise and anticlockwise Indexing selectable between 1° and 5° Heavy-duty design for stable workholding Suitable for integration with standard fixturing systems FAQ How precise is the indexing of the VIT-1200-5? The indexing provides selectable steps of 1° or 5°; the unit is built to accuracy class 3, offering dependable repeatability for positioning tasks. Can the table rotate in both directions during a machining cycle? Yes, the worktable rotates both clockwise and anticlockwise, allowing flexible programme strategies and simpler toolpath planning for the Vertex VIT-1200-5. What holding options are available for securing workpieces? The top plate features 22 mm T-slots and a clamping capability listed as 8100 Kgs, enabling robust fixturing with standard clamps and modular fixtures on the VIT-1200-5. Is the VIT-1200-5 suitable for heavy fixtures and large components? With a 1200×1200 mm plate and a mass of 2000 kg, the table supports substantial fixtures and large components while maintaining stability during operation. Who supplies and supports the VIT-1200-5 in Europe? The VIT-1200-5 is supplied via Metav Werkzeuge, which provides European logistics, consultancy and parts support for Vertex rotary equipment Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Combine compact dimensions, a complete 60-piece set and a total weight of 8.6 kg for reliable small-part management; ideal where organised, readily accessible components speed up assembly and maintenance. Order the storage set directly via Metav Werkzeuge or consult our specialists for application advice. VHB-1218 Vertex storage box set — compact 120 x 180 x 80 mm organiser A VHB-1218 storage box designed for neat organisation of small parts in workshops, assembly benches and logistics areas. Compact 120 x 180 x 80 mm format Set contains 60 organising boxes Total weight 8.6 kg for stable handling Designed for workshop small-part storage Faster access to components improves workflow The compact format and clear layout of this organiser set offer a practical solution for reducing search times and minimising production interruptions. With dimensions of 120 x 180 x 80 mm, each unit fits neatly on shelving, in drawers or on worktops, making the system useful where space is at a premium. The set nature provides consistent compartment sizes across the workplace, supporting rapid visual checks and simplified inventory tracking—advantages that translate into measurable time savings on repetitive assembly tasks. Consistent quantities and handling for routine tasks Supplied as a complete set of 60 items, the organiser pack streamlines procurement and restocking. The combined weight of 8.6 kg indicates a substantial kit suitable for workshop use and transport between workstations when required. This configuration supports standardisation across production cells and service teams: identical boxes reduce fitting and sorting errors and make it easier to implement storage guidelines on the shop floor, contributing directly to process reliability. Practical applications across trades and sectors The organiser set is appropriate for a wide range of applications, from mechanical workshops and electrical assembly to laboratory benches and hobby workspaces. Thanks to its small-part focus, the system is particularly well suited for applications where fast retrieval of fixings, components and consumables is essential. The clear, compact footprint ensures that the storage solution integrates with existing workplaces without extensive modifications. Logistics and availability geared to professional users Offering a ready-to-deploy kit, the package supports immediate deployment in production and maintenance environments. The product is distributed via Metav’s European logistics, which acts as a quality filter and supplies workshops reliably from a centralised stock. This combination of ready availability and a standardised set composition helps purchasing teams reduce supplier count while ensuring consistent quality across orders. Choose the Vertex VHB-1218 for dependable small-part organisation and contact Metav Werkzeuge for procurement or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: VHB-1218 GTIN: 4061905083112 Dimensions: 120 x 180 x 80 mm (L x W x H) Weight: 8.6 kg Pieces per set: 60 ECLASS: 21100422 Facts Dimensions (L x W x H): 120 x 180 x 80 mm Total weight: 8.6 kg Quantity in set: 60 Special features Application: small-part storage Intended use: workshop, assembly bench, logistics areas Availability: fast dispatch via Metav distribution FAQ What are the exact dimensions of the organiser units? The individual units measure 120 x 180 x 80 mm, suitable for placement on shelves and benches. How many pieces are included in the set? The set contains 60 identical storage boxes, delivered as a complete organiser kit. Is the set intended for professional workshop use? Yes, the pack is designed for small-part storage in workshop and assembly environments and supports standardised organisation. What is the total weight of the set for handling and transport planning? The combined weight of the set is 8.6 kg, which allows straightforward handling and movement between workstations. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Take advantage of precise clamping, a compact footprint and reliable repeatability for streamlined workholding. The collet secures parts at a 1-7/8" diameter while remaining light enough for quick handling; Order the VCL-2C collet directly via Metav Werkzeuge or ask our consultants if needed. VCL-2C Collet – Vertex clamping collet with 1-7/8" opening The VCL-2C collet is a precision clamping accessory designed for workshop and light industrial workholding where secure, repeatable gripping of cylindrical parts is required. Precision machined for secure clamping 1-7/8" clamping diameter Compact 120 x 84 mm footprint Lightweight 0.22 kg for easy handling Consistent, precision clamping for reduced rework The VCL-2C delivers secure clamping that reduces part movement during machining, which in turn lowers the need for rework and inspection cycles. With a defined 1-7/8" opening and a design focused on dimensional accuracy, this collet supports repeatable setups and reliable part concentricity. The result is fewer rejects and a steadier production flow, making it suitable for applications where tight runout and reproducible fixturing are priorities. Space‑saving design that speeds changeovers A compact footprint of 120 x 84 mm and a mass of just 0.22 kg mean the collet occupies little bench or spindle space and is straightforward to handle during tool changes. The modest size aids rapid changeovers and keeps the workstation uncluttered, which benefits throughput in busy shops. Lightweight handling also minimises operator fatigue during frequent swaps, delivering a small but measurable efficiency gain over heavier alternatives. Clear identification for procurement and traceability Marked by a GTIN and eClass identifier, the component supports streamlined ordering and inventory control. The presence of standard identification data simplifies purchasing and reduces the risk of receiving incorrect items, which is particularly valuable for maintenance planners and procurement teams managing multiple SKUs. Traceable parts accelerate replacement and ensure the correct clamping solution is always available for scheduled work. Robust workshop performance and practical benefits Manufactured under Vertex standards, the collet offers dependable mechanical behaviour in everyday use and straightforward storage between jobs. The combination of precise clamping and compact dimensions delivers both process stability and operational flexibility. For clients aiming to improve first‑pass yields or to simplify fixture setups, this component presents a pragmatic option that integrates readily into typical shop workflows. For application advice, availability checks or to source Vertex clamping solutions, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 — Metav provides technical guidance and reliable supply for workshop requirements Technical data Article number: VCL-2C GTIN: 4061905083921 Brand: Vertex Core specifications Opening: 1-7/8" Dimensions: 120 x 84 mm Clamping depth: 47.63 mm Weight: 0.22 kg eClass: 21041712 Features / Versions Category: Vertex Main image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/c0/2f/97/63/63972fc0c806fb82109e3692/vcl-2c-main.jpg Detail image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/b4/2f/97/63/63972fb4c806fb82109e33f3/vcl-2c-detail.jpg FAQ What clamping diameter does this collet support? The collet supports a 1-7/8" clamping diameter, providing a stable grip for compatible cylindrical parts. Is the VCL-2C suitable for frequent changeovers? Yes, the VCL-2C’s compact dimensions (120 x 84 mm) and light weight (0.22 kg) make it well suited to operations requiring rapid swaps and minimal handling effort. How is the part identified for procurement? Identification for the component is available via its GTIN (4061905083921) and eClass (21041712), which supports accurate ordering and inventory control. Which manufacturer produces this collet? This collet is produced by Vertex and distributed with technical details aligned to Vertex quality standards. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan

Robust, hardened L-jaws deliver durable clamping and a precise seating for VQC vises; their compact dimensions and substantial mass ensure stable grip and repeatable results in workshop and light industrial settings. Benefit from consistent workholding and straightforward replacement options — order via Metav Werkzeuge or consult the team for application advice. VQC-125FJL hardened L-jaws for VQC vices — precision fit, compact size The VQC-125FJL hardened L-jaws are designed as directly compatible clamping jaws for VQC vices, providing a maintenance-friendly solution for repetitive holding tasks in workshops and production cells. Hardened L-jaws for durable clamping Precision fit for VQC vices Compact dimensions: 124.5 x 78 x 40 mm Solid weight for stable grip 2.09 kg Consistent grip through hardened construction The hardened design of these L-jaws preserves the jaw geometry under repeated load cycles, delivering wear resistance and long-term dimensional stability. That resistance reduces the need for frequent dressing or replacement, which minimises process interruptions and supports continuous production. By keeping the clamping faces true, the accessory contributes to consistent part positioning and less rework in serial operations, improving overall throughput and process reliability. Precise seating and reduced setup time A precision fit with VQC vices ensures reliable alignment and repeatability during successive setups. The specified dimensions 124.5 x 78 x 40 mm allow quick verification against existing fixturing and support efficient planning for tool offsets and centrelines. For small-batch manufacturing and fixture-dependent tasks, a secure and predictable clamping interface shortens setup time and improves first-piece accuracy, which is especially valuable where tolerances and surface finish are critical. Stable mass and practical integration for workshop use At 2.09 kg, these jaws add mass to the vice assembly that suppresses vibration and helps maintain steady contact pressures during machining or inspection routines. Compatibility with VQC vices simplifies inventory management and replacement logistics in the workshop. The design emphasises straightforward integration and serviceability, supporting uninterrupted workholding without introducing complex maintenance procedures or special tools. Choose the Vertex VQC-125FJL hardened L-jaws from Metav Werkzeuge for dependable, repeatable clamping in production and workshop environments — contact Metav Werkzeuge for application guidance or to check stock availability in Emmerich. Technical Data Article number: VQC-125FJL GTIN: 4061905093487 Eclass: 21029107 Core technical data Dimensions: 124.5 x 78 x 40 mm Weight: 2.09 kg Materials & compatibility Fits VQC vices Hardened jaws Intended for workshop workholding FAQ Are these jaws compatible with all VQC vices? The VQC-125FJL is specified for VQC vices; compatibility with other vice models depends on mounting geometry and should be verified against the vice specifications. What are the exact external dimensions and weight? Dimensions are 124.5 x 78 x 40 mm and the mass is 2.09 kg, as stated in the product technical data. What material are the jaws made from and is a coating applied? The product data indicates hardened jaws but does not specify the base material or any coating in detail. How do these jaws affect clamping accuracy? Hardened, properly matched jaws maintain jaw geometry and reduce deformation, which supports repeatable clamping and better positional accuracy for successive workpieces. Is installation or special adaptation required to replace existing jaws? These jaws are designed for VQC vice compatibility; any adaptation depends on the current vice configuration and mounting provisions, which should be compared with the VQC-125FJL specifications. Manufacturer: Vertex Machinery Works Co., Ltd.; No. 296, Sec. 1, Feng Shih Road, Fengyuan District, Taichung City 420, Taiwan