620g Precision Balance With 0.001g Readability, 140mm Stainless Steel Pan, Fork Weighing System, LCD Display - KERN

Take advantage of reliable RS-232 data transfer and a 1.5 m cable length to integrate measurement equipment smoothly into existing workflows. Order the cable directly via Metav Werkzeuge from the Emmerich warehouse or request tailored advice from our consultants. MLB-A05 Interface Cable — RS-232 connection, 1.5 m (KERN) The MLB-A05 Interface Cable is a dedicated RS-232 connection lead for weighing instruments and laboratory balances, engineered to provide steady data transmission between measurement devices and external systems. RS-232 serial interface 1.5 m cable length Compatible with KERN balances Robust connector design Ensure accurate data logging with stable RS-232 transfer The RS-232 interface offers a proven, industry-standard method for serial data exchange, making this cable well suited to industrial metrology and laboratory environments where measurement integrity matters. By providing reliable data transfer, the cable reduces the risk of communication errors during recording and logging tasks, which in turn supports traceability and process consistency. The design supports routine integration into existing measurement setups without requiring changes to software or instrument firmware. Easy integration and clear compatibility for weighing systems With a 1.5 m lead, connection flexibility between bench instruments and nearby data terminals is increased while keeping cable routing tidy in workshop or lab setups. The cable is specified for use with RS-232-equipped devices commonly found on balances and related instruments, ensuring broad compatibility across models. Installation is straightforward: the interface lead serves as a direct conduit for serial signals, simplifying set-up procedures and reducing the need for adapters or converters in typical measurement environments. Built for dependable workshop and laboratory use The cable’s construction balances a robust connector with low weight, enabling frequent handling and routine use at weighing stations without imposing undue strain on instrument ports. The modest mass supports neat cable management and minimises mechanical load on connectors during daily operation. Sourced under the KERN product line, the accessory is intended to complement precision equipment with components that preserve uptime and support consistent measurement workflows. For reliable serial connectivity choose the KERN MLB-A05 interface cable—contact Metav Werkzeuge in Emmerich for specialist guidance or to order directly from our stock. Technical data Article number: MLB-A05 Manufacturer: KERN SKU: MLB-A05 GTIN: 4045761245204 Core data Cable length: 1.5 m Weight: 0.08 kg ECLASS: 19050112 Tariff code: 84239010 Special features Interface: RS-232 Category: Accessories for scales Origin: China FAQ What interface does this cable use? The MLB-A05 interface cable uses the RS-232 serial interface for data transfer between balances and external devices. Is the cable compatible with KERN scales? Yes, the lead is specified for compatibility with KERN weighing instruments and other devices that provide an RS-232 port. How long is the cable and how heavy is it? The cable measures 1.5 m in length and has a weight of 0.08 kg, suitable for bench-top and near-equipment routing. Can this cable be used for data logging to a PC or printer? The MLB-A05 is designed for RS-232 connections and can be used to link RS-232-capable instruments to serial printers or data acquisition systems that accept serial input. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930

Take advantage of the lightweight aluminium construction and the integrated pour spout for clean, efficient transfer of small items; its minimal tare impact and compact handling support a smooth weighing routine. Order directly via Metav Werkzeuge or consult our advisors for application-specific guidance. Gemstone Pan AEJ-A05 — Aluminium weighing accessory with pour spout (KERN) The Gemstone Pan AEJ-A05 is a compact aluminium weighing accessory designed for precise small-part weighing on jeweller’s and laboratory scales, featuring a practical pour spout for controlled transfer. Lightweight aluminium design Integrated pour spout for safe transfer Accessory for weighing scales Compact, low-tare handling Improved handling for small and valuable items The aluminium construction of this accessory gives a favourable balance between sturdiness and low mass, reducing the influence on tare and allowing more consistent results when measuring small quantities. The integrated pour spout simplifies the transfer of beads, stones or other small components into vessels or containers, cutting handling time and minimising spillage. This makes the accessory particularly well suited where repeatable, time-efficient weighing is required. Designed for routine use in workshops and labs As a dedicated weighing accessory from KERN, the design supports frequent use in jewellers’ benches, quality-control benches and laboratory settings. The material choice—aluminium—ensures straightforward maintenance and keeps the accessory light during repeated handling operations. Used in combination with compatible scales, this pan assists reliable batch handling and rapid processing of small items, enhancing overall workflow efficiency. Compact form and user-friendly operation Weighing just 0.01 kg, the AEJ-A05 is easy to position on balance pans and to manoeuvre for precise placement and removal. Its compact profile reduces clutter on the weighing platform while the pour spout ensures controlled discharge of contents into preparation vessels or sample holders. The result is less rework and faster cycle times when preparing samples or sorting gemstones for inspection. Order the KERN AEJ-A05 through Metav Werkzeuge for a dependable, lightweight weighing accessory and consult our Emmerich team for application advice Technical data Article number: AEJ SKU: AEJ-A05 Manufacturer: KERN Country of origin: PL Core specifications Weight: 0.01 kg Eclass: 20180290 Tariff code: 90160090 GTIN: 4045761181885 Materials and features Aluminium Practical pour spout Accessory for weighing scales Product group: pans FAQ What material is the pan made of? The KERN AEJ-A05 is manufactured from aluminium, chosen for its light weight and suitability as a weighing accessory. Is the pan suitable for weighing gemstones and similar small parts? Yes. The AEJ-A05 is designed as an accessory for scales and is especially suitable for small, valuable items such as gemstones where careful transfer is important. What identifiers and codes belong to this product? The item is listed as SKU AEJ-A05 with GTIN 4045761181885 and eClass 20180290. Where is this weighing pan produced? Production origin is listed as Poland (PL), and the accessory is supplied under the KERN brand. KERN — Origin: Poland — GTIN: 4045761181885

Take advantage of reliable wireless data transfer and a 12–48 V input combined with ready-to-use accessories for fast integration into weighing systems; the lightweight design (approx. 0.3 kg) keeps installation simple and reduces downtime. Order the interface directly via Metav Werkzeuge or contact our consultants for compatibility advice. WLAN adapter KERN YKI-03 — Wireless interface for industrial scales, 12–48 V input The WLAN adapter KERN YKI-03 is a compact wireless interface designed to connect weighing instruments to local networks, optimised for workshop and laboratory environments. 12–48 V input for flexible power sources Includes power adapter, 1 m network cable Plug‑and‑play driver CD for quick setup Lightweight: 0.3 kg for easy installation Seamless network integration for accurate weighing data The WLAN interface provides wireless connectivity to integrate scales with existing IT infrastructure, eliminating extended cable runs and enabling centralised data collection. With native support for networked data transfer, the module reduces manual recording and the risk of transcription errors, which improves traceability and speeds up reporting cycles. Compatibility with common weighing platforms ensures reliable transmission of measured values to back‑office systems or data loggers, supporting continuous production monitoring. Power flexibility and ready-to-use accessories for fast commissioning Equipped for a wide input range (12–48 V), the unit works with typical industrial power supplies and battery setups, allowing installation on different equipment without extra converters. The scope of delivery contains a power adapter, a 1 m network cable and a driver CD, enabling plug‑and‑play commissioning and shorter setup times. For teams with limited IT support, the included driver package and cabling minimise configuration steps, so the interface can be operational quickly and with predictable effort. Compact design that keeps workshops productive The interface’s compact footprint and approx. 0.3 kg weight make it straightforward to mount on or near weighing devices without adding significant load or requiring special supports. The small size contributes to tidy installations and easier handling during maintenance or relocations. Combined with dependable wireless operation, this lightweight module supports smoother workflows and less downtime, which contributes to consistent throughput and dependable measurement routines in busy production or lab environments. For tailored advice on integrating the KERN WLAN adapter into existing weighing equipment, contact Metav Werkzeuge in Emmerich — technical consultants are available via info@metav-werkzeuge.com or by phone at +49 2822 7131930 to confirm compatibility and arrange prompt dispatch. Technical data Manufacturer: KERN SKU: YKI-03 ECLASS: 19170204 HS code: 84239010 Facts Input voltage: 12 V–48 V Weight: 0.3 kg Network cable length: 1 m Special features Included accessories: power adapter, 1 m network cable, driver CD Category: scales accessory Origin: CN FAQ Is the WLAN adapter compatible with all KERN scales? Compatibility depends on the scale model and communication interfaces; the WLAN adapter KERN YKI-03 is intended for KERN weighing systems with compatible data ports and standard network protocols. What is included with the adapter for installation? Delivery of the WLAN adapter KERN YKI-03 includes a power adapter, a 1 m network cable and a driver CD to support plug‑and‑play setup. What power supply is required for the unit? The unit accepts a 12–48 V input range; verify the supply voltage of the target weighing device before installation to ensure safe operation with the KERN YKI-03. How portable is the wireless interface for workshop use? At approximately 0.3 kg, the KERN YKI-03 is lightweight and easy to reposition, supporting flexible deployment across different workstations and laboratories. KERN — Origin: China. Address and direct manufacturer contact details not provided.

Take advantage of reliable dust protection and light shielding to preserve measurement accuracy, with broad compatibility for KERN analytical and precision balances featuring a glass wind shield. Supplied as a practical pack of five, this cover supports smooth workflow and low-maintenance operation. Order directly via Metav Werkzeuge or consult our technical advisors for application guidance. Dust cover ABS-A08 – protective cover for analytical and precision balances by KERN The dust cover ABS-A08 is a protective cover designed for KERN analytical and precision balances with a glass wind shield, preventing contamination and ambient light interference during sensitive weighing tasks. Protects against dust and light Compatible with KERN analytical balances Designed for balances with glass wind shield Supplied as pack of 5 Preserve measurement integrity with simple protection A lightweight protective cover reduces the risk of sample contamination and measurement drift, supporting consistent measurement integrity in laboratories and production areas. Dust particles and stray light can alter readings on highly sensitive instruments; by placing a cover over the balance’s glass draft shield, settling particles are kept away from the weighing pan and reflective light is minimised. This results in fewer repeat measurements and less time spent on corrective cleaning, which translates into improved process efficiency and more reliable data for quality control. Fast fit for analytical and precision balances The cover is engineered to fit balances that incorporate a glass wind shield, enabling quick placement and removal during routine operations. Compatibility with a wide range of KERN models simplifies stocking decisions for procurement teams: one standard accessory supports multiple instruments. The supply in a pack of five is practical for facilities running several weighing stations or for replacing worn covers without delay. The design prioritises unobtrusive protection so that normal workflow—placing samples, adjusting weights and reading results—remains straightforward. Practical benefits for workshop and lab routines Using a protective cover supports the longevity of sensitive weighing equipment by reducing particulate ingress and light-induced reading anomalies. For teams focused on throughput and traceable results, the cover contributes to operational stability and reduces the frequency of maintenance interventions. The accessory is a cost-effective way to protect investment in precision equipment while helping to maintain the reproducibility required in analytical work and small-batch production. For tailored advice or to order the KERN dust cover ABS-A08 in practical multi-packs, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise guidance and reliable supply. Technical Data Article number: ABS SKU: ABS-A08 Manufacturer: KERN GTIN: 4045761163348 Country of origin: China Tariff number: 39269097 ECLASS: 24322502 Numbers Weight: 0.01 kg Pack quantity: 5 Special features Protects against dust and light Fits KERN analytical and precision balances with glass wind shield Supplied as pack of 5 FAQ Is this cover suitable for all KERN analytical balances? The dust cover ABS-A08 is compatible with KERN analytical and precision balances that feature a glass wind shield. How often should the cover be replaced? Replacement frequency depends on usage and contamination levels; the ABS-A08 is supplied as a pack of five to allow regular replacement when required. Can the cover be used with non-KERN balances? The design targets balances with a glass draft shield; fit with other brands depends on the specific dimensions and draft-shield configuration, so compatibility should be checked against the balance’s glass wind shield. Does the cover protect against light as well as dust? Yes, the cover shields samples from ambient light while also preventing dust settlement, both of which help to maintain stable readings. Is material information available for the cover? Material details are not specified in the provided product data Manufacturer: KERN — Address and contact details not provided in the product data

For reliable, low-effort protection of sensitive scale controls, choose the lightweight KERN PNJ-A01S05 protective cover: supplied as a five-piece set and made to shield the keyboard and housing of the PNS.600-3 — order directly via Metav Werkzeuge or consult our specialists for fit and logistics. PNJ-A01S05 Protective Cover for PNS.600-3 — KERN, pack of 5 A PNJ-A01S05 protective cover designed for the KERN PNS.600-3, providing targeted protection for keyboard and housing in workshop and laboratory settings Protective cover for keyboard and housing Compatible with PNS.600-3 scales Supplied as a set of 5 Lightweight: approx. 0.02 kg each Reduce downtime with targeted component protection The protective cover is engineered to sit over the keyboard and housing, preventing ingress of dust and light contaminants that can cause wear or require frequent cleaning. Supplied as a pack of 5, the set supports routine replacement cycles and spare provisioning, which promotes continuity of operation. For workshop managers seeking measurable benefits, the accessory offers a straightforward way to lower maintenance intervals and preserve the functional integrity of weighing equipment without complex retrofitting. Practical supply and simple stock management for workshops Delivered in a multi-piece set, this accessory simplifies procurement for production floors and service teams. The five-piece configuration allows rotation between devices and ensures replacements are available when needed; this supports efficient inventory control and reduces ad hoc downtime. Availability through Metav Werkzeuge benefits from centralised logistics and a broad product range, enabling rapid restocking and consistent supply for scale accessory needs. Easy handling and clear compatibility for everyday use Compatibility with the PNS.600-3 scale series is specified, enabling immediate deployment on matching units. At approximately 0.02 kg per item, the cover is lightweight and easy to fit, so fitment requires minimal handling time and no special tools. The result is reliable protection with negligible impact on workflow, providing workshop staff with practical peace of mind and a simple method to protect sensitive control interfaces during routine operations. Secure a ready supply of KERN PNJ-A01S05 protective covers via Metav Werkzeuge for consistent workshop protection — enquiries and order details available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: PNJ-A01S05 Manufacturer: KERN GTIN: 4045761185470 Country of origin: CN Core facts Weight: 0.02 kg Commodity code: 39269097 ECLASS: 24322502 Pack quantity: 5 pieces Special features Protection for keyboard and housing Compatible with PNS.600-3 scales Product category: Scales accessory — protective covers Category path: Waagen › Zubehör FAQ Is this cover compatible with the PNS.600-3 scale series? Yes. The PNJ-A01S05 protective cover is specified for use with the PNS.600-3 range and fits the keyboard and housing configuration of that model. How many covers are supplied in one set? The product is supplied as a set of five covers, allowing for immediate replacements and simple stock rotation. What protection does the cover provide? The cover protects the keyboard and housing from dust and light contamination, reducing the need for frequent cleaning and helping to maintain normal operation. What is the weight of each cover? Each PNJ-A01S05 protective cover weighs approximately 0.02 kg, making it easy to handle and fit during routine maintenance. Manufacturer: KERN — Country of origin: CN

Take advantage of a reliable wired network connection and the ready-to-install package that speeds up data collection and reduces integration time; order or request advice via Metav Werkzeuge for supply and technical guidance. Ethernet Adapter YKI-01 – Network interface for KERN weighing instruments with power supply and driver CD The Ethernet Adapter YKI-01 provides a compact interface to connect weighing instruments to a wired network, enabling stable data transfer for laboratory, production and logistics environments. Reliable wired network connection for weighing data Includes power adapter and driver software CD Compact and lightweight at 0.17 kg Designed for KERN scales and industrial use Seamless networked weighing for uninterrupted workflows The Ethernet Adapter YKI-01 converts scale output into a stable, wired network connection, enabling automated data logging and centralised monitoring. By using a direct Ethernet link rather than intermittent manual transfers, production processes benefit from consistent data flow and fewer transcription errors. This reduces administrative overhead and supports quality control routines by ensuring measurement results are captured reliably in the factory network. The compact format and low weight make the unit unobtrusive in bench-top installations while maintaining industrial robustness. Ready-to-install kit that minimises downtime Delivered with a power adapter, a CD containing drivers, software and a user manual, and adhesive feet, the interface is supplied as a near-complete integration kit. The included software package supports configuration and ensures the interface can be recognised by existing systems without sourcing additional components. The clear scope of delivery simplifies commissioning and helps maintain uptime on the production line, turning a potentially complex network connection into a straightforward installation task that conserves engineering hours. Robust choice backed by supply reliability Designed for use with weighing equipment, the adapter is manufactured to meet the demands of workshop and industrial environments while remaining compact for bench-mounted devices. Origin information and classification details are documented in the technical section below to support procurement and customs procedures. Metav Werkzeuge’s role as a European quality filter provides added assurance: decades of distribution experience and a broad product range mean reliable supply and concise technical advice are available close to the workbench. For procurement or technical queries relating to the KERN Ethernet Adapter YKI-01, contact Metav Werkzeuge in Emmerich am Rhein for product availability and expert guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: YKI Manufacturer: KERN SKU: YKI-01 GTIN: 4045761146624 EClass: 19050111 Facts Weight: 0.17 kg Tariff code: 84239010 Origin: Taiwan Special features Includes power adapter CD with drivers, software and manual Adhesive feet included Intended for scales and weighing equipment FAQ Is the adapter compatible with KERN weighing instruments? The KERN Ethernet Adapter YKI-01 is intended for use with KERN weighing instruments and is supplied to support network integration of those devices. What is included in the delivery package? Delivery of the Ethernet Adapter YKI-01 includes a power adapter, a CD with drivers, software and a user manual, plus adhesive feet. How does the adapter simplify data collection? By providing a wired network interface, the adapter enables centralised data capture and logging, removing the need for manual result transfer and reducing transcription errors. Where is the adapter manufactured? The adapter originates from Taiwan; further sourcing and supply details can be provided by Metav Werkzeuge. KERN; Origin: Taiwan; Seller: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930