26mm Template Standard, Ø26mm - Peak

Taking advantage of 7× magnification and an achromatic lens delivers clearer visual measurement and reduced inspection time; combined with a compact Ø26 mm field of view and a 0–20 mm measuring range with 0.1 mm scaling, this loupe supports reliable workshop and quality‑control checks — order directly via Metav Werkzeuge or contact our consultants for technical clarification. Peak MS905.140 Measuring Loupe — 7× achromatic lens, Ø26 mm field of view The Peak MS905.140 Measuring Loupe is a compact inspection loupe designed for precise visual measurement and routine quality checks in workshops and inspection stations. 7× magnification for clear component inspection Achromatic lens reduces colour fringing Measuring range 0–20 mm with 0.1 mm scale Faster, measurable inspection for production control With 7× magnification and a 0–20 mm measuring range, this loupe is engineered to make routine checks faster and more consistent. The integrated 0.1 mm scale enables immediate reading of small features without auxiliary gauges, which reduces throughput delays caused by repeated measurements. In production runs where cycle time and reproducibility matter, the instrument supports decision‑making with visual data that are repeatable and verifiable, helping to reduce rework rates and maintain process stability. Optical clarity that improves measurement certainty The achromatic lens corrects for chromatic aberration, so edges and fine details appear sharply without coloured fringing. A clear image means less doubt when aligning the scale with a feature, directly lowering measurement uncertainty. The generous Ø26 mm field of view allows comfortable observation of components and templates at once, aiding rapid comparison and inspection. For customers transitioning from simple magnifiers, the corrected optics provide an immediate upgrade in visual quality and confidence. Compact, durable design for shop‑floor routines At Ø36 x 62 mm, the loupe is compact enough for handheld use and for keeping at inspection benches. It includes a standard measurement template, enabling quick reference checks without additional tooling. The small footprint and simple handling make the instrument suitable for multiple settings: bench inspection, incoming goods control, and fine‑work visual verification. Because the device is purely optical, it requires no power and is ready to use at any workstation, streamlining routine checks across shifts. Save time with straightforward handling and clear results Quick alignment, instant readings and a corrected optical system combine to reduce hesitation and improve throughput during inspection tasks. The loupe’s features are aimed at pragmatic benefits: faster decision cycles, fewer unnecessary measurements and clearer documentation of non‑conformances. If traceable photographic records are required, the clear, fringing‑free view simplifies visual communication between operators and quality engineers and supports consistent audit evidence. For availability, ordering or technical assistance from Metav Werkzeuge — including stock information and delivery to European workshops — please contact info@metav-werkzeuge.com or call +49 2822 7131930; the Peak MS905.140 can be dispatched promptly from Emmerich. Technical Data Article number: MS905.140 Name: Peak Measuring loupe with standard template, 7× Brand: Peak Specifications Magnification: 7× Measuring range: 0–20 mm Scale: 0.1 mm Field of view: Ø26 mm Dimensions: Ø36 x 62 mm Features Achromatic lens (reduced chromatic aberration) Includes standard measurement template Category: Optics Image asset available (thumbnail) FAQ What magnification does the loupe provide? The Peak MS905.140 provides 7× magnification for detailed component inspection. What measuring range and scale are available? Measuring range is 0–20 mm with a 0.1 mm scale for straightforward readings. Does the lens correct for chromatic aberration? Yes — the achromatic lens in the MS905.140 reduces colour fringing and sharpens edge definition for clearer measurements. Is the loupe suitable for workshop and incoming‑goods inspection? Yes — the compact design and included standard template make it suitable for bench inspection, incoming goods checks and routine quality control. Is an image or product thumbnail available for reference? An image asset and thumbnail are available for visual reference and catalogue use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Take advantage of a compact inspection kit that combines 7x magnification and a set of tracing templates to speed up visual checks and marking tasks; order the set directly via Metav Werkzeuge or request guidance from our consultants for workshop integration. MS905.155 – Peak 7x loupe set with five templates A MS905.155 set designed for close visual inspection and template-based marking in workshops and laboratories 7x magnification for detailed inspection Includes five tracing templates for marking Compact, portable inspection kit Suitable for workshop and laboratory use Detect fine detail faster with a high-magnification loupe The combination of a 7x magnification loupe and a compact optical design enables quicker identification of scratches, burrs and print defects. Visual inspection tasks are simplified because faults are made more visible without complex equipment; the loupe’s optical power supports accurate assessment of small features while reducing the need for repeated handling. This yields more efficient quality checks and a lower probability of overlooked defects, improving throughput for routine inspections. Consistent marking and repeatable templates for workshop workflows The included templates (numbers 2, 3, 7, 8 and 10) provide standardised shapes for tracing and comparison, which helps to maintain uniformity across parts and assemblies. Templates are useful for rapid go/no-go checks and for marking reference points before processing. When combined with the loupe, the templates support precise alignment and visual confirmation of edges and contours, so marking and inspection steps become both faster and more reliable. Portable inspection kit that integrates into production and bench work Housed as a small inspection set, the components are easy to store and carry between workstations or to use on the shop floor. The compact format supports ad hoc checks during assembly or downstream inspection without the need for bench-mounted microscopes. This flexibility is particularly valuable for small workshops and service departments where space and time are at a premium, and where quick, repeatable visual verification is required. Reliable aid for quality control and routine maintenance The inspection set is suited for a broad range of visual tasks, from incoming goods checks to final inspections. Its straightforward functionality reduces training time and can be used by operators who are not specialist metrologists. The kit supports a pragmatic quality routine: rapid assessment with the loupe, followed by template-based confirmation, which together form a simple and traceable inspection sequence. For reliable visual inspection in busy workshops choose the Peak MS905.155 inspection set and contact Metav Werkzeuge for availability and practical purchasing advice via info@metav-werkzeuge.com or phone +49 2822 7131930 Technical data Article number: MS905.155 Brand: Peak Item type: Set Facts Magnification: 7x Items per set: 6 Accessories included: x5 templates (No. 2, 3, 7, 8 and 10) Special features Intended use: Optical inspection and marking tasks Compact, portable format Ideal for workshop and laboratory environments FAQ What magnification does the inspection set provide? The set provides a 7x magnification loupe for visual inspection and detailed checks. Which templates are included with the kit? The kit includes five tracing templates: numbers 2, 3, 7, 8 and 10, supplied together with the loupe in the set. How many items are delivered in one set? One set contains six items in total, comprising the loupe and the five templates (SKU MS905.155). Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com