Ø41.5x122 Template Microscope 75x With Removable Rubber Eyecup, 0.01 Scale - Peak

Take advantage of the 75× magnification and the Type 34 configuration for consistent optical checks; order via Metav Werkzeuge or consult their specialists for supply and application advice. Peak standard reticle Type 34 — 75× optical reference A Peak standard reticle designed as a precise optical reference for inspection microscopes and comparator systems in metrology and quality control. 75× magnification for clear reference Type 34 geometry for standardised checks Designed for optical calibration tasks Compatible with inspection microscopes Fast and reliable reference for optical checks A compact reference such as this standard reticle delivers a dependable visual benchmark for routine inspections and alignment tasks. The combination of 75× magnification and defined markings provides an immediate, high‑contrast image that simplifies measurement procedures and reduces setup time. By using a fixed optical reference, measurement uncertainty from subjective interpretation is lowered and reproducibility between operators is improved. The reticle’s layout supports quick verification of scale, focus and relative positions in optical systems, enhancing throughput without compromising precision. Measurable repeatability and workflow integration The Type 34 configuration gives a recognisable pattern that is easy to compare across multiple sessions. That recognisability supports consistent calibration checks and fosters statistically meaningful repeatability in inspection routines. Integration into existing workflows is straightforward: mount the reticle in the instrument’s eyepiece or imaging plane and use the pattern as a baseline for dimensional assessments. Regular use of this optical reference helps maintain traceable process control and contributes to faster decision‑making on production lines where visual tolerances are critical. Practical advice for use and maintenance To preserve functionality, handle the reticle by its edges and store it in a dust‑free sleeve when not in use. Routine visual inspections under known illumination and the correct focus setting ensure the inspection microscopes deliver consistent imaging at 75×. For additional technical specifications, compatible mounts or recommended cleaning procedures, Metav Werkzeuge can provide expert guidance and documentation; their support helps implement the reticle into laboratory or workshop environments with minimal disruption. For precise calibration advice and supply of the Peak standard reticle Type 34, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 to discuss technical details and delivery options. Technical Data Article number: MS905.237 Manufacturer: Peak Product name: Peak standard reticle Type: Type 34 Category: Optics Main image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/74/4a/d0/67/67d04a7452eeab2aa78be171/MS905243-main.jpg Facts Magnification: 75× Special features Designed for optical measurement Type 34 configuration for standard checks Suitable for inspection microscopes FAQ What is the primary purpose of this reticle? The Peak standard reticle Type 34 (MS905.237) serves as a visual reference for optical measurement and alignment tasks at 75× magnification, aiding routine checks and verification. Which equipment is compatible with this reference? The reticle is intended for use with inspection microscopes and optical comparators that accept eyepiece or imaging‑plane reticles; its 75× specification matches systems calibrated to that magnification. How does the Type 34 pattern support repeatability? The defined geometry of Type 34 provides clear, repeatable markers that simplify comparative readings and reduce variation between successive inspections. What handling and storage is recommended? Handle by the edges, keep the reticle in a protective sleeve when not in use, and avoid abrasive or solvent cleaning to preserve the optical markings. Is a calibration certificate included with the product? The provided data does not indicate an included calibration certificate; options for traceable calibration can be arranged separately if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from the combination of 75x magnification, the compact Type 35 format and Peak brand consistency for reliable optical inspection results; order the item directly via Metav Werkzeuge or consult their advisors for additional guidance. Peak Schablone — Type 35 optical template with 75x magnification A durable optical template from Peak designed to support precise visual inspection and measurement tasks in laboratory and workshop optics. 75× magnification for detailed inspection Type 35 optical template Peak brand, catalogue item MS905.239 Precise visual inspection, measurable outcomes The 75x magnification provides a clear enlargement for detecting fine details that would otherwise be missed at lower powers. As an optical template, this accessory assists in visual comparison, defect identification and layout verification under an inspection microscope or magnifier. The specification focuses procurement decisions on measurable performance rather than vague promises, enabling improved quality control and reduced rework rates in production and repair workflows. Seamless fit into inspection workflows The Type 35 format is intended for straightforward integration into established optical setups and inspection benches. Lab technicians and quality engineers can rely on the repeatable visual reference it offers for component checks and alignment tasks. By choosing a catalogue item such as MS905.239, inventory management and traceability are simplified, helping to maintain consistent inspection standards across shifts and sites. Practical procurement and identification When specifying equipment for purchasing lists or maintenance spares, the clear designation Peak Schablone Type 35 and the SKU MS905.239 remove ambiguity. The entry under the Optik category makes it easy to find alongside other optical aids and accessories. Including these exact identifiers in orders or work orders reduces lead-time risk and ensures the correct tool is supplied for optical comparison and measurement duties. Handling, storage and verification advice To preserve optical clarity and prolong service life, store the template in a clean, dust-free environment and handle it with lint-free gloves or wipes to avoid fingerprints on critical surfaces. Periodic visual verification against a calibrated reference proves the template remains fit for purpose; document checks to support quality records and compliance. Simple care routines reduce the likelihood of false rejections and maintain reliability during daily inspection tasks. For procurement advice or to place an order for the Peak Schablone Type 35 (SKU MS905.239), contact Metav Werkzeuge for product guidance and reliable supply from Emmerich: info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: MS905.239 Product: Peak Schablone Typ 35 Brand: Peak Category: Optik Facts Magnification: 75x Special features Image: https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/74/4a/d0/67/67d04a746977996463b6e3b4/MS905245-main.jpg FAQ What magnification does the template provide? The template offers 75x magnification, which is suitable for detailed visual inspection tasks and close comparison work with microscopes and magnifiers. Which product designation ensures correct ordering? Order using the designation Peak Schablone Type 35 or SKU MS905.239 to ensure the exact optical template is supplied. For which tasks is this optical template suitable? The template is intended for visual inspection, defect detection and alignment checks where a defined magnification reference supports decision-making and documentation. How should the template be stored to maintain performance? Store the template in a clean, dry place and avoid touching optical surfaces; routine visual verification against a reference is recommended to confirm ongoing suitability. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com