Take advantage of an integrated tool set that combines time-saving matching components and robust threading capability for consistent production results; the configuration reduces setup time and supports dependable metalworking routines. Order the kit directly via Metav Werkzeuge or request technical advice from the Metav consultants for precise application guidance. TECWERK Threading Complete Set — 3-in-1 Multibox with twist drills and machine taps Threading Complete Set 3-in-1 Multibox TECWERK offers a compact workshop solution for preparatory drilling, countersinking and machine tapping in metalworking environments Professional 3-in-1 multibox set Includes twist drills and machine taps Conical and deburring countersink included Optimised for metal machining operations Faster thread production through matched tool selection The 3-in-1 Multibox brings together purpose-matched twist drills, countersinks and machine taps so that drilling and threading steps align precisely. Combining tools that are designed to work in sequence reduces guesswork during setup and cuts interchange times between operations, which improves throughput. For workplaces handling repetitive threaded holes, the coordinated toolset supports a more consistent cycle and a clear workflow advantage in everyday production. Clear functionality: what each component delivers A matched kit contains the essential tool types required for standard thread creation: twist drills prepare the pilot hole, conical and deburring countersinks remove burrs and chamfer edges for clean starts, and machine taps form the thread to specification. The configuration is suitable for general metal machining where reliable thread engagement and surface finish matter. Terminology: twist drills remove material to the required core diameter, countersinks ensure correct lead-in, and machine taps cut the internal thread profile with machine-driven stability. Practical handling and site organisation benefits The multibox design keeps components organised and easy to identify on the bench, supporting fast selection and safe storage between jobs. Good organisation reduces the risk of tool damage and lost time searching for the correct drill or tap. Routine maintenance—cleaning swarf, applying appropriate cutting fluid and checking tap condition—extends service life and preserves precision performance. The set is a pragmatic addition to engineering shops looking to streamline small-batch or repair work without overcomplicating tooling choices. Contact Metav Werkzeuge for availability and tailored advice on the TECWERK 3-in-1 Multibox (SKU 2000806019NW) — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: 2000806019NW Product name: Threading complete set 3-in-1 Multibox TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Pieces: 12 Set type: 3-in-1 Article number: 2000806019NW Special features Twist drills included Conical and deburring countersink included Machine taps included Optimised for metal machining 3-in-1 Multibox configuration FAQ What is included in the set? The TECWERK Threading Complete Set contains matching twist drills, conical and deburring countersinks and machine taps arranged in a 3-in-1 multibox to cover the drilling-to-threading workflow. Is this kit suitable for general metalworking? Yes, the set is optimised for metal machining and designed to support common workshop applications where drilled holes are followed by tapping operations. Can the machine taps be used in a drill press or CNC machine? The machine taps in this kit are intended for machine-driven tapping; appropriate fixturing and correct spindle settings are recommended to achieve consistent results. How does the countersink improve threading quality? The conical and deburring countersink prepares a clean lead-in and removes burrs, which helps the tap start squarely and reduces the risk of cross-threading. Which SKU should be quoted when enquiring? Please quote SKU 2000806019NW when enquiring about the TECWERK Threading Complete Set to ensure fast identification. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of durable HSS‑Co5 cutting material, full metric coverage from M3–M12, and a matching set of twist drills for precise pre‑drilling — a practical choice for reliable, repeatable machine threading. Order the set directly via Metav Werkzeuge or consult our specialists for tailored advice. RUKO machine tap set DIN 371/376 B M3–M12 — HSS‑Co5, 14‑piece The RUKO machine tap set DIN 371/376 B M3–M12 is a production‑grade tapping kit designed for standard metric machine threading in industrial and workshop environments HSS‑Co5 high‑speed steel with 5% cobalt Covers M3 to M12 metric thread sizes Includes matching twist drills for accurate pre‑drilling DIN 371/376 standard for machine threading Robust cutting performance for machine use The set is manufactured from HSS‑Co5, a high‑speed steel alloy with cobalt reinforcement that improves heat resistance and tool life under machine cutting conditions. This material choice means longer tool life and more consistent thread quality when compared with standard HSS in repetitive production tasks. The DIN 371/376 designation ensures the taps conform to recognised machine‑thread profiles, which simplifies integration into existing machining workflows and reduces rework due to non‑standard thread geometry. A complete assortment for efficient workflow Contained in the kit are machine taps for sizes M3, M4, M5, M6, M8, M10 and M12 together with matching twist drills (Ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm). Having taps and pre‑drills paired in one kit supports a streamlined process: correct pilot holes from the twist drills reduce tap wear and improve thread accuracy. The 14‑piece arrangement supplies the typical progression needed on a shop floor, lowering tooling-change downtime and helping maintain throughput for small to medium batch runs. Practical workshop benefits and secure storage The kit is supplied in a compact plastic case, keeping tools organised and protected between uses. Clear labelling and fixed positions in the cassette speed up tool selection and inventory checks, which supports orderly workshop practice. The combination of standardised thread forms and pre‑matched drills makes the set especially suitable for maintenance departments and contract manufacturers seeking a dependable, ready‑to‑use solution for metric machine threading. For procurement or technical questions about the RUKO machine tap set, contact Metav Werkzeuge in Emmerich for personalised advice and swift delivery: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 4000602048NW Item: Machine tap set DIN 371/376 B M3–M12, 14‑piece Manufacturer: Ruko GmbH Packaging unit: 1 Core specifications Thread sizes: M3, M4, M5, M6, M8, M10, M12 Twist drill diameters: 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm Total pieces: 14 Standard: DIN 371 / DIN 376 Special features Cutting material: HSS‑Co5 (high‑speed steel with 5% cobalt) Includes machine taps to DIN 371 and DIN 376 Includes matching twist drills for pre‑drilling Supplied in a plastic case for organised storage FAQ What sizes are included in the set? The kit contains machine taps for M3, M4, M5, M6, M8, M10 and M12 plus matching twist drills (Ø 2.5–10.2 mm) for the RUKO machine tap set (SKU 4000602048NW) Is the steel grade suitable for continuous machine use? Yes—the HSS‑Co5 composition in the RUKO set is chosen for improved heat resistance and wear properties appropriate for machine tapping operations Do the taps conform to recognised thread standards? The taps are manufactured to DIN 371 and DIN 376, ensuring standard metric machine thread forms and compatibility with standard components How does including twist drills benefit the tapping process? Pre‑matched twist drills ensure correct pilot hole diameters, reducing tap stress, improving thread accuracy and extending tool life in workshop production Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen

Take advantage of a robust steel sheet construction with a powder-coated finish and a format tailored for three-piece hand tap sets (DIN 352, M3–M12) to keep workshop tools organised and protected; order via Metav Werkzeuge or consult our advisors for delivery from Emmerich. TECWERK metal case for M3–M12 — empty, powder-coated steel box The TECWERK metal case for M3–M12 is an empty, powder-coated steel storage box designed for safe and compact organisation of three-piece hand tap sets in line with DIN 352. Robust powder-coated steel construction Fits 3-piece hand tap sets DIN 352 Secure storage for M3–M12 taps Streamlined organisation for small tap sets A clearly arranged storage solution improves workflow efficiency by reducing search times and minimising handling errors. The powder-coated outer surface protects against everyday workshop wear while the internal layout is intended for three-piece hand tap sets, providing a logical place for each tool. This organisation reduces downtime in busy shops and supports lean tool management, making the storage box a practical component of an orderly bench or tool trolley. Durable protection tailored to workshop use Constructed from robust steel sheet, the case offers mechanical protection and a stable housing for precision cutting tools. The powder-coated finish adds a measure of corrosion resistance, extending the service life of both the case and the tools it contains. For environments with frequent handling or exposure to workshop contaminants, the sturdy construction safeguards taps from deformation and contaminant ingress, helping maintain the cutting edges and thread geometry. Standard compliance and compatibility Designed to accommodate taps sized M3–M12, the box aligns with DIN 352 dimensions for three-piece hand tap sets, ensuring compatibility with widely used tooling systems. This standard conformity simplifies integration into existing workshops, as the storage accommodates recognised sizes and set types. The compact footprint of the box supports efficient storage within cabinets or drawers while still keeping individual taps immediately accessible. Practical logistics and workshop benefits Empty on delivery and purpose-built for hand tap sets, the case supports straightforward stocking and labelling practices. The solid construction allows repeated stacking and handling without deformation, which benefits inventory management and transport within the facility. As part of a broader workshop supply strategy, this storage solution contributes to faster tool retrieval, safer transport between workstations, and better protection for delicate thread-cutting tools. For a durable, standards-compliant storage solution from TECWERK, contact Metav Werkzeuge for availability and delivery from our Emmerich warehouse — eMail: info@metav-werkzeuge.com | Phone: +49 2822 7131930 Technical data Article number: 2000867523NW Item: Metallkass.M3-M12 empty Manufacturer: TECWERK Packaging unit: 1 UID: 2000867523NW Facts Thread sizes: M3–M12 Standard: DIN 352 Packaging unit: 1 Special features Empty, for three-piece hand tap sets (DIN 352) Material: robust steel sheet Surface: powder-coated FAQ Is this case suitable for three-piece hand tap sets? The TECWERK metal case is designed specifically for three-piece hand tap sets and conforms to DIN 352 for sizes M3–M12. Can the case be stacked for storage? Yes, the robust steel construction allows safe stacking during storage and transport within the workshop. Does the case provide corrosion protection for stored taps? The powder-coated finish improves corrosion resistance and helps protect both the case and the tools it contains. What sizes of taps fit into the case? The box accommodates taps in the range M3–M12, matching common three-piece hand tap set dimensions. Is the case delivered filled or empty? The item is supplied empty and ready to be populated with three-piece hand tap sets as required. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a precisely matched combination of HSS cutting performance, DIN 352 conformity and a durable metal case for efficient, reliable thread production; order directly via Metav Werkzeuge or request tailored advice from our consultants. TECWERK Thread Tap Set DIN 352 M3–M12 — HSS, Metric ISO Threading The TECWERK Thread Tap Set DIN 352 M3–M12 is a compact workshop kit for producing metric ISO threads in small to medium hole sizes, supplied with matching core twist drills and an adjustable tap wrench for safe, repeatable threading. HSS taps for durable performance Metric ISO threads M3–M12 Includes matching core twist drills Supplied in a robust metal case Consistent thread quality through standardised tooling The set is engineered to DIN 352, ensuring repeatable thread geometry across batches and compatibility with established workshop practices. Made from HSS, the taps deliver a balance of wear resistance and toughness that supports clean chip formation and reduced tap breakage in common ferrous and non-ferrous materials. By relying on industry-standard dimensions and ground flutes, the kit reduces rework and minimises tap wear, which translates into measurable time savings during production or maintenance tasks. Accurate hole preparation with matching twist drills Each tap is paired with a precisely sized core twist drill to achieve the correct drill-to-tap relationship for metric ISO threads. The included drill diameters (Ø 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm) simplify set-up and avoid the guesswork of selecting drill sizes, improving first-pass accuracy. Proper hole preparation prevents excessive tool loading and helps maintain thread flank integrity; in practice this means fewer stripped threads and more dependable assembly results when working with typical workshop materials. Robust packaging and practical workshop handling Supplied in a metal case, the kit protects cutters from damage and keeps components organised for rapid access on the bench or in a service vehicle. The adjustable tap wrench (size 1 1/2) offers secure clamping and controlled torque for hand threading, reducing the risk of cross-threading. The compact format supports efficient tool management, so technicians can move quickly between drilling and tapping operations without searching for matched tools. Designed for straightforward use across skill levels The kit supports systematic drilling and threading workflows: select the matching drill, prepare the hole, then use the correct tap with the adjustable wrench. This clear sequence, supported by DIN 352 conformity and the included matching drills, helps less experienced users achieve professional results while allowing seasoned machinists to maintain pace under production conditions. The toolkit’s composition emphasises efficiency and reliability, making it suitable for maintenance, prototyping and small-batch production. Contact Metav Werkzeuge for personalised advice or to secure this TECWERK tap set—email info@metav-werkzeuge.com or call +49 2822 7131930 for immediate assistance and fast delivery from our Emmerich warehouse Technical data Article number: 2000867525NW SKU: 2000867525NW Description: Thread tap set, DIN 352, metric ISO threads Core specifications Thread sizes: M3, M4, M5, M6, M8, M10, M12 Core drill diameters: Ø 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm Tap wrench size: 1 1/2 Content: 15 pieces Features Material: HSS (high-speed steel) Standard: DIN 352 Threads: Metric ISO Packaging: Metal case Includes: taps, matching core twist drills, adjustable tap wrench FAQ Which thread sizes are included in the set? The thread sizes supplied are M3, M4, M5, M6, M8, M10 and M12 as part of the TECWERK Thread Tap Set DIN 352 M3–M12 (SKU 2000867525NW). Are the drill bits matched to the taps? Yes, the kit contains matching core twist drills (Ø 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm) that correspond to the taps to ensure correct hole preparation for metric ISO threads. What materials are suitable for these taps? The taps are made of HSS and are suitable for typical workshop materials; correct drill selection and cutting conditions should be followed for optimal life and thread quality. Is a tap wrench included and what size is it? An adjustable tap wrench (size 1 1/2) is included in the set to provide secure clamping and controlled manual threading. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from durable HSS construction and full metric coverage from M3–M12 that reduces tool changes and downtime; order the threading set directly via Metav Werkzeuge or consult their specialists for specification support. TECWERK Threading Set M3–M12 — HSS in Metal Case The TECWERK Threading Set M3–M12 is a compact workshop kit for cutting, repairing and maintaining ISO metric threads in common workshop environments. HSS cutting material for longevity Thread sizes M3–M12 covered Includes taps, dies and holders Supplied in robust metal case Adjustable tap and die wrenches included Precision and longevity for frequent threading tasks The set is built around HSS cutting tools, chosen for a balance of wear resistance and regrindability, which supports sustained use in routine maintenance and small-batch production. The inclusion of hand taps manufactured to DIN 352 standards and corresponding dies ensures consistent thread geometry and repeatability. Such an arrangement reduces reject rates and rework, contributing to measurable efficiency gains on the shop floor. Comprehensive metric range to reduce tool changeovers Covering M3–M12 thread sizes, the kit removes the need to purchase individual tools for common fastening dimensions, streamlining inventory and procurement. The assortment includes both taps and dies in matching sizes, which means tapered entry, plug, and bottoming operations can be carried out with appropriate tools. By consolidating these sizes in one set, machine set-up times and operator handling are minimised, leading to faster throughput. Practical accessories that support correct use and faster workflows The set is supplied with a die holder (25 x 9) and an adjustable die stock (size 1 1/2) alongside a tap wrench, screwdriver and a thread gauge, enabling correct clamping and simple verification of the produced threads. These accessories are selected to simplify alignment and torque control, which helps to avoid cross-threading and premature tool wear. The compact storage in a metal case keeps components organised and protected during transport and storage. Suited to workshop repair and everyday production tasks This toolkit is appropriate for maintenance engineers and small workshops that require a dependable, standardised solution for metric threading. The combination of standard-compliant taps, matched dies and practical holders supports a range of manual threading operations without necessitating specialised machinery, while preserving thread quality and dimensional accuracy. Contact Metav Werkzeuge today for specification advice or to order the TECWERK threading set; phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 2000867530NW Product label: Gewindeschneidzeugsatz M3-M12 32tlg.HSS Metallkass.TECWERK Manufacturer: TECWERK Packaging unit: 1 Data Thread range: M3–M12 Pieces: 32 Die holder: 25 x 9 Adjustable die stock: size 1 1/2 Special features Cutting material: HSS Includes: hand taps DIN 352 for M3, M4, M5, M6, M8, M10, M12 Includes: dies for M3, M4, M5, M6, M8, M10, M12 Includes: die holder 25 x 9, adjustable die stock Gr. 1 1/2, tap wrench, screwdriver, thread gauge Supplied in metal case Brand: TECWERK FAQ Which thread sizes are contained in the set? The kit covers metric thread sizes M3–M12, with taps and dies supplied for each nominal size. What materials are the cutting tools made from? The cutting tools are made from HSS, chosen for durability and ease of maintenance. What accessories are included to support threading operations? The set contains a die holder (25 x 9), an adjustable die stock (size 1 1/2), a tap wrench, a screwdriver and a thread gauge for verification. Are the taps supplied to an industry standard? Yes, the hand taps are specified as DIN 352 for the listed sizes, ensuring consistent thread form. Is the set supplied in a protective case? The components are supplied in a robust metal case for secure storage and transport. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Compact HSS performance meets workshop practicality: a comprehensive selection of taps and dies, a range of twist drills and countersinks, and a tidy plastic case for transport and storage. Benefit from efficient thread production, versatile drilling options and organised tool availability — order directly via Metav Werkzeuge or consult our specialists for tailored advice. TECWERK Metalworking Set M3–M12 — 33-piece HSS Kit in Plastic Case A TECWERK Metalworking Set M3–M12 designed for workshop tapping, die-cutting, drilling and countersinking in maintenance and light fabrication. HSS taps and dies for durable performance Twist drills and step bits for variable holes Includes adjustable tap wrench and die holder Supplied in a robust plastic carry case Ready-to-use kit that streamlines workshop processes The TECWERK Metalworking Set M3–M12 consolidates core tools for thread cutting and holemaking into a single 33-piece kit, reducing time spent searching for individual parts. With a selection of taps, dies and matched twist drills, the set supports efficient progression from pilot drilling to final threading. The result is shorter setup times and fewer tool changes, which translates directly into improved throughput for maintenance tasks and small-series production runs. Durable high-speed steel for consistent cutting quality All cutting items are manufactured from HSS, chosen for its balance of hardness and toughness across common workshop applications. The twist drills are supplied to DIN 338 standards, offering predictable geometry for straight holes, while the countersinks and step drills enable smooth deburring and accurate hole enlargement. These characteristics lower the likelihood of tool breakage and workpiece rework, supporting reliable repeatability and less downtime during repair and assembly operations. Practical handling, secure storage and enhanced usability The set includes an adjustable tap wrench, a die holder (25 x 9) and a thread gauge, making it straightforward to switch between internal and external threading tasks. Tools are organised in a sturdy plastic carry case that keeps components protected and accessible on the bench or in a service vehicle. This practical combination improves ergonomics during use and ensures essential items remain at hand, helping technicians maintain a steady workflow under varied site conditions. Clear documentation and guidance for safe operation Included manuals cover thread cutting, drilling and countersinking techniques, offering step-by-step instructions and procedural tips for safer, more effective results. For teams with mixed experience levels, these reference materials support standardised procedures and reduce trial-and-error. Coupled with the kit’s engineered tool geometries, the documentation contributes to consistent part quality and a lower learning curve for apprentices and occasional users. Contact Metav Werkzeuge for expert advice on integrating the TECWERK metalworking set into workshop inventory or for assistance selecting complementary tooling and supplies. Technical data Article number: 2000806023NW Product name: Metalworking Set M3–M12, 33-piece HSS, plastic case Brand: TECWERK Facts Thread sizes: M3, M4, M5, M6, M8, M10, M12 Drill diameters (core twist drills): 2.5 mm, 3.3 mm, 4.2 mm, 5.0 mm, 6.8 mm, 8.5 mm, 10.2 mm Countersink diameters (90°): 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm Step drill ranges: 4–12 mm, 4–20 mm, 6–30 mm Content: 33 pieces Special features Material: HSS (high-speed steel) Includes: taps, dies, adjustable tap wrench, die holder 25 x 9 Accessories: thread gauge Storage: plastic carry case Documentation: manuals for thread cutting, drilling and countersinking FAQ What sizes of threads are covered by the set? The TECWERK metalworking set covers standard metric thread sizes M3 to M12, supplied with corresponding taps and dies for internal and external thread production. Which drill standards are the supplied twist drills conforming to? The included twist drills are core drills to DIN 338 specification, manufactured in HSS for consistent hole quality in general workshop use. Does the kit include tools for deburring and countersinking? Yes, the set contains several 90° countersinks and step drills that facilitate deburring, hole enlargement and chamfering operations. Is a die holder and tap wrench provided for threading operations? An adjustable tap wrench and a die holder (25 x 9) are part of the set, enabling secure, controlled threading of bolts and holes. Are instructional materials provided with the kit? The package includes manuals covering thread cutting as well as drilling and countersinking procedures to support safe and efficient use of the tools. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a multi‑function set that combines HSS‑G cutting performance with a self‑centring geometry and a quick‑change 6.3 mm (1/4") hex shank for efficient workshop use; order directly via Metav Werkzeuge or contact the consultants for tailored advice. Combination thread drill set DIN 3126 M3–M10 – HSS‑G, 1/4" hex shank (TECWERK) A Combination thread drill set DIN 3126 M3–M10 (HSS‑G) designed for drilling, thread cutting and deburring across a wide range of small‑part workshop applications HSS‑G for universal metal machining Self‑centring design for fast thread starts 6.3 mm (1/4") hex shank for quick changes Plastic case with bit adapter included Faster results through combined drilling, threading and deburring The kit brings together three machining steps in one tool family, reducing set‑ups and tool changes. The included taps are manufactured from HSS‑G, a high‑speed steel grade that offers a balanced mix of toughness and wear resistance; this material choice supports reliable thread forming and prolongs service intervals. With the self‑centring geometry, holes are started and guided accurately, which minimises alignment errors and lowers rework rates. For production or repair benches where throughput matters, the set is a practical way to increase process speed without adding complexity. Quick clamping and compatibility for modern workshop workflows The 6.3 mm (1/4") hex shank conforms to the commonly used quick‑change interfaces, so the taps and combined drills can be run directly from bit holders, cordless drivers and quick‑change chucks. This compatibility reduces downtime between operations and allows handheld or machine‑assisted use where appropriate. The adherence to DIN 3126 standards ensures predictable fitment and interchangeability across tools and holders, which benefits procurement and tool management strategies in small and medium‑sized enterprises. Robust packaging and ready‑to‑use contents for organised workspaces Storage and immediate availability are addressed with a durable plastic case that keeps each size organised: one each for M3, M4, M5, M6, M8 and M10 plus a bit adapter. The compact cassette protects cutting edges during transport and simplifies inventory checks. Clear labelling reduces search time at the bench, while the organised layout supports lean workflows in busy service bays and production cells. Reliable choice for mixed‑material small part machining The combination set is engineered for everyday tasks on a variety of standard workshop metals where small threads are required. The HSS‑G composition provides sufficient resilience for frequent use on common steels and non‑ferrous alloys, delivering a consistent thread profile when the sequence of drilling, tapping and deburring is followed. For operations that demand simple, dependable tooling rather than specialised inserts, this kit offers a pragmatic balance of performance and economy. Contact Metav Werkzeuge for local stock details, technical matching or to arrange a purchase directly from Emmerich—phone +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 2000867339NW Product label: Combination thread drill set DIN 3126 M3–M10 HSS‑G TECWERK Brand: TECWERK Facts Sizes: M3, M4, M5, M6, M8, M10 Shank: 6.3 mm (1/4") hex Pieces: 7 Packaging unit: 1 Special features Cutting material: HSS‑G Functions: drilling, thread cutting, deburring Geometry: self‑centring Standard: DIN 3126 Packaging: plastic case Includes: bit adapter FAQ What sizes are included in the set? The set contains taps/drills for M3, M4, M5, M6, M8 and M10 sizes, plus a bit adapter (SKU 2000867339NW). Is the kit suitable for use with quick‑change drivers? Yes, the tools have a 6.3 mm (1/4") hex shank designed for quick‑change bit holders and drivers. What material are the cutting tools made from? The taps and drills are manufactured from HSS‑G high‑speed steel, offering a balance of hardness and toughness for general workshop use. Can the tools be used to deburr as well as to cut threads? The combination geometry allows drilling, thread cutting and light deburring in sequence, reducing the need for separate deburring tools. Does the set comply with recognised standards? The kit follows DIN 3126 dimensions for the hex shank interface and is intended for standard workshop applications. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of high-performance HSS‑Co5 cutting material and DIN‑compliant tapping geometry for consistent thread quality in workshop and production. The kit combines standardised thread coverage with matching twist drills for efficient preparation — order directly via Metav Werkzeuge or consult our specialists for specification support. RUKO Machine Tap Set DIN 371/376 C M3–M12 — HSS‑Co5 performance The RUKO Machine Tap Set DIN 371/376 C M3–M12 is a precision tapping kit intended for machining internal threads to DIN standards in general engineering and mechanical workshops HSS‑Co5 cutting material DIN 371/376 standard taps Thread range M3–M12 included Matching twist drills supplied Supplied in plastic case Consistent thread quality for serial and workshop applications The tapping tools are manufactured to DIN 371/376, ensuring repeatable thread profiles suitable for metric internal threads from M3–M12. The use of HSS‑Co5 (cobalt‑alloy high‑speed steel) provides enhanced heat and wear resistance compared with standard HSS, which translates into longer tool life and fewer rejects during repeated runs. This reliability supports stable production cycles and reduces machine downtime by delivering predictable cutting behaviour and consistent thread tolerances. Practical kit contents that streamline preparation and operation The set includes machine taps for the standard sizes plus the matching twist drills Ø 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm, simplifying hole preparation and reducing the need to source separate drills. Delivered in a compact plastic case, the kit keeps tools organised and transportable between bench and machine, aiding efficient workflow. Clear labelling of the taps and drills reduces setup time, enabling faster job changeovers in busy workshops. Robust cutting material and application flexibility The cobalt‑alloy composition of the cutting material provides greater resistance to thermal softening when tapping at elevated spindle speeds, which benefits machining in mild and medium‑strength engineering materials. The standardised geometry ensures compatibility with machine tapping cycles and collet fixtures, while the set composition supports common maintenance and production tasks where reliable internal threads are required. The overall design focuses on precision and durability, helping to maintain component integrity and assembly fit. For dependable workshop threading choose the RUKO quality offered through Metav Werkzeuge — contact our Emmerich team for tailored advice and secure supply from stock at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 4000602049NW Product: Machine tap set DIN 371/376 C M3–M12, HSS‑Co5, 14-piece Manufacturer: Ruko GmbH Facts Thread range: M3–M12 Norm: DIN 371/376 Cutting material: HSS‑Co5 Twist drill diameters: Ø 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm Special features Contents: taps DIN 371 M3 / M4 / M5 / M6 / M8 / M10 and DIN 376 M12 Includes matching twist drills Supplied in plastic case FAQ Which thread sizes are covered by the set? The set covers metric thread sizes from M3 to M12, providing the common range required for many workshop and maintenance applications. What materials suit these taps best? The HSS‑Co5 cutting material in this tapping kit is designed for general engineering materials and offers improved heat resistance for extended service life. Are matching drills supplied with the kit? Yes, the kit contains matching twist drills with diameters specified for correct hole preparation prior to tapping. Do the taps conform to industry standards? The tools are manufactured to DIN 371/376, ensuring standardised thread geometry and interchangeability in industrial environments. What is the article number for ordering or reference? The article number is 4000602049NW for ordering and catalogue reference. Ruko GmbH: Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert‑Bosch‑Strasse 7, 71088 Holzgerlingen

Take advantage of a complete tap-and-drill pairing for reliable metric thread production: HSS‑Co machine taps combined with HSS twist drills ensure consistent cutting performance and simplified tool selection. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Machine tap set DIN 371/376 C M3–M12 — 14‑piece, HSS / HSS‑Co The TECWERK machine tap set DIN 371/376 C M3–M12 is a workshop-oriented assortment of machine taps and matching twist drills designed for efficient production of metric internal threads. HSS‑Co machine taps per DIN 371/376 Matching HSS twist drills DIN 338 Coverage for M3–M12 metric threads 14 pieces for workshop versatility High-performance tap and drill pairing for consistent thread results The set combines HSS‑Co machine taps (DIN 371 for M3–M10; DIN 376 for M12) with HSS twist drills manufactured to DIN 338, providing a coordinated toolchain for thread production. This pairing reduces variances between pilot drill and tap, which leads to a more reliable thread profile and fewer rejected parts. The materials selected for the cutting edges prioritise wear resistance and retention of sharpness under continuous use, contributing to efficient machining cycles and predictable tool life. Workshop integration that supports productive processes Prepared for machine tapping applications, the assortment suits general engineering and maintenance environments where metric threads are frequently required. The presence of matching drills eliminates the need for separate procurement of pilot drills and shortens set‑up times at the machine. With standardised geometries and compliance with recognised DIN standards, the components integrate smoothly into existing process chains and tooling lists, enabling reproducible results across batches. Reduced tool changes and better shop-floor workflow Covering the common sizes M3–M12 in a single kit means fewer interruptions to change tools and less time searching for the correct drill–tap combination. The 14‑piece arrangement supports rapid job throughput and lowers the administrative overhead of managing multiple individual items. For production planning, this translates into measurable efficiency gains and simpler stock control without compromising on the precision required for internal threads. What the materials and standards mean in practice The taps are made from cobalt‑alloyed high‑speed steel (HSS‑Co), which increases heat resistance and cutting edge stability compared with plain HSS in challenging conditions. The pilot drills are HSS to DIN 338, a proven specification for twist drills used in workshop and industrial settings. The DIN 371 and DIN 376 standards specify the form and tolerances for machine taps and ensure compatibility with established metric thread dimensions; selecting tools that conform to these standards reduces uncertainty and simplifies quality assurance. For tailored advice on the TECWERK machine tap set and its suitability for specific machining tasks, contact Metav Werkzeuge — consultants can confirm material compatibility and dispatch from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867538NW Label: Maschinengewindebohrerset DIN 371/376 C M3-M12 14tlg.HSS Ku.-Kass.TECWERK Manufacturer: TECWERK Package unit: 1 Content: 14 pieces Facts Thread sizes: M3, M4, M5, M6, M8, M10, M12 Drill diameters (mm): 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 Pieces: 14 Standards: DIN 371 / DIN 376 / DIN 338 Features Machine taps, HSS‑Co Twist drills, HSS (DIN 338) Metric thread production set Matched drill and tap combinations Intended for machine tapping applications FAQ Which thread sizes are included in the set? The set covers metric thread sizes M3–M12, supplying taps for M3, M4, M5, M6, M8, M10 and M12 alongside matching pilot drills; reference SKU 2000867538NW. What materials are the taps and drills made from? Taps are manufactured from HSS‑Co (cobalt‑alloyed high‑speed steel) and the pilot drills are HSS, offering enhanced wear resistance for typical workshop use. Which standards do the tools comply with? The taps conform to DIN 371 (M3–M10) and DIN 376 (M12), while the twist drills are made to DIN 338, ensuring standardised dimensions and compatibility. Is this assortment suitable for machine tapping operations? Yes, the TECWERK machine tap set is designed specifically for machine tapping applications and includes matched twist drills to simplify setup. How many pieces are in the kit and what is included? The kit comprises 14 pieces: seven machine taps and seven corresponding twist drills covering the specified metric sizes. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Reliable HSS‑Co construction, adherence to DIN 371/376 and threaded coverage from M3–M12 deliver consistent, workshop-grade results; the integrated twist drills speed setup and reduce tool changes. Order directly via Metav Werkzeuge or consult the sales team for specification advice. Machine Tap Set DIN 371/376 B VA M3–M12 — 14-piece HSS‑Co by TECWERK The Machine Tap Set DIN 371/376 B is a precision-oriented tap and drill combination designed for efficient production of metric internal threads in stainless and similar workshop materials. Machine tap set meeting DIN 371/376 standards HSS-Co taps and drills for increased wear resistance Includes twist drills DIN 338 for precise pre-drilling Suitable for stainless steel workpieces (VA) Faster, repeatable thread manufacture for production environments The set is built around DIN 371/376 specification taps made from HSS‑Co, which provides improved hardness and thermal stability compared with standard high-speed steels. This combination enables reliable chip formation and extended tool life under repetitive loads, contributing to a lower total cost of ownership through fewer tool changes. By using taps that conform to established norms, compatibility with existing fixtures and thread gauges is ensured, simplifying quality assurance workflows and reducing rework. Fewer setup steps through matched drills and taps Including twist drills manufactured to DIN 338 allows immediate matching of drill and tap diameters, reducing the time spent selecting pre‑drill sizes and lowering the risk of incorrect pilot holes. The coordinated set layout streamlines process planning in small-batch and repetitive production, shortening machine downtime and boosting throughput. Where cycle-time efficiency matters, this integrated approach produces consistent hole geometry that supports accurate thread engagement and predictable assembly behaviour. Material compatibility and practical workshop benefits Marked with the designation VA, the tooling is suitable for use in stainless steel applications where work hardening and heat sensitivity are considerations. The HSS‑Co cutting material offers enhanced wear resistance and toughness, making the set a practical choice for toolrooms, maintenance shops and production lines working with a range of ferrous and stainless components. Clear standards and tool materials give buyers a factual basis for selecting suitable cutting speeds and lubrication strategies, improving first‑pass yields. Comprehensive contents that support immediate use and reduced inventory The 14-piece configuration supplies a complete threading solution from smaller to common medium sizes, covering M3–M12 with the taps and matched drill diameters for pilot holes. Providing both taps and twist drills in one set reduces the number of separate orders and eases storage management, letting procurement consolidate suppliers and simplify reordering. Robust materials and standardised geometry help maintain consistent results across batches, supporting traceability and process documentation in compliance-focused workshops. For procurement or technical clarification on the TECWERK Machine Tap Set and to purchase directly from Metav Werkzeuge, please contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000867537NW Description: Machine tap set DIN 371/376 B VA M3–M12, 14-piece, HSS‑Co, TECWERK Packing unit: 1 Facts Thread sizes: M3, M4, M5, M6, M8, M10, M12 Drill diameters: 2.5 mm, 3.3 mm, 4.2 mm, 5.0 mm, 6.8 mm, 8.5 mm, 10.2 mm Pieces: 14 Special features Tap material: HSS‑Co Drill material: HSS‑Co Tap standards: DIN 371 (M3–M10) and DIN 376 (M12) Drill standard: DIN 338 Type: VA Manufacturer: TECWERK FAQ What thread sizes are contained in the set? The set contains taps for M3, M4, M5, M6, M8, M10 and M12 as supplied in the TECWERK Machine Tap Set (SKU 2000867537NW). Are matching drill diameters included for pre‑drilling? Yes, the set includes twist drills to match the taps; diameters provided are 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 and 10.2 mm. What does HSS‑Co mean for tool performance? HSS‑Co indicates a cobalt‑alloyed high‑speed steel that improves heat resistance and wear life compared with standard HSS, a characteristic used throughout the TECWERK set. Is this set suitable for stainless steel components? The designation VA denotes suitability for stainless applications; combined with HSS‑Co cutting material, the set is prepared to handle common stainless workpieces when appropriate cutting parameters are applied. Which standards govern the taps and drills in the set? Taps conform to DIN 371/376 while the twist drills follow DIN 338, ensuring standardised thread and hole geometries for industrial use. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a standards-compliant metric range and robust cutting materials to maintain consistent thread quality and reduce setup time; the combination of DIN 371/376 taps and DIN 338 twist drills delivers predictable results in routine machine tapping operations. Order the set directly via Metav Werkzeuge or consult the team for application advice. TECWERK Machine tap and drill set DIN 371/376 B – M3–M12, 14-piece, HSS The TECWERK machine tap set provides a compact assortment of metric machine taps and matching twist drills for routine workshop threading and pre-drilling tasks, designed to meet recognised DIN standards. Standards-compliant DIN 371/376 Includes HSS-Co machine taps Twist drills to DIN 338 included Metric range M3–M12 Reliable threads to DIN standards for production use The set is engineered around the DIN 371/376 specifications to ensure interchangeability and reproducible thread geometry when used on machine tapping operations. Compliance with these standards reduces variability between batches and simplifies quality control, which is particularly relevant in repetitive production environments. Consistent thread form translates into fewer rejects and predictable assembly behaviour, supporting smoother workflows on the shop floor. Complete metric range with matching drill diameters Covering metric taps from M3–M12, the assortment pairs each thread size with appropriate pilot holes. The supplied twist drills have diameters of 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 and 10.2 mm, listed to match the corresponding metric taps. Having the correct drill sizes in one kit reduces measurement checks and tool changes, accelerating setup and helping to avoid undersize or oversize holes that would affect thread engagement and component strength. Cutting materials chosen for durability and heat resistance Taps are supplied with HSS-Co cutting material for improved red hardness and wear resistance in machine tapping, while the twist drills conform to DIN 338 and are manufactured from HSS to provide reliable drilling performance. The cobalt-enhanced taps retain cutting edge stability at elevated temperatures that can occur during continuous operation, extending tool life and maintaining cutting geometry. For workshops seeking long-term repeatability, the material choice helps lower tooling cost per part. Compact kit design to reduce downtime and simplify logistics As a 14-piece assortment of machine taps and matching twist drills, the kit concentrates frequently used sizes into a single solution, reducing procurement complexity and inventory variety. The inclusion of both machine taps and corresponding twist drills ensures fewer interruptions for tool selection and less time spent matching drills to taps. Combined with Metav’s distribution and local availability, the set supports a pragmatic approach to workshop stocking and rapid replenishment. Contact Metav Werkzeuge for tailored technical guidance and secure a TECWERK set to standardise threading tasks in the workshop; Metav Werkzeuge can advise on integration and availability. Technical Data Article number: 2000867536NW Description: Machine tap set DIN 371/376 B M3–M12, 14-piece Manufacturer: TECWERK Facts Tap sizes: M3, M4, M5, M6, M8, M10, M12 Drill diameters: 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm Standards: DIN 371/376, DIN 338 Tap cutting material: HSS-Co Drill cutting material: HSS Special features Set composition: machine taps + matching twist drills Content: 14 pieces Packaging unit: 1 FAQ Which thread sizes are included in the kit? The kit contains machine taps for M3, M4, M5, M6, M8, M10 and M12 as part of the TECWERK machine tap and drill set (SKU 2000867536NW). Are the taps cobalt-enhanced? Yes, the taps in this set are made with HSS-Co cutting material for improved heat resistance, while the matching twist drills are standard HSS. What standards do the tools conform to? Threads are produced to DIN 371/376 and the twist drills conform to DIN 338, assuring compatibility with metric machine-threading practices. How do the drill diameters relate to the tap sizes? Each drill diameter in the set is selected to match the corresponding metric tap size so that pre-drilled holes achieve the correct core diameter for full thread engagement. Is the set suitable for continuous workshop use? The combination of DIN conformity and cobalt-enhanced taps supports repeated machine tapping operations; the set is intended to reduce changeover time and improve repeatability in routine production tasks. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a durable, workshop-ready tapping kit that combines HSS‑Co cutting performance with a vapour‑coated finish and ISO2 tolerance accuracy to keep production running smoothly. Order via Metav Werkzeuge or consult our specialists for compatibility and delivery from Emmerich. Machine tap set DIN 371/376 B Universal M3–M12 HSS‑Co by TECWERK — vapour‑coated, universal type Machine tap set DIN 371/376 B Universal M3–M12 HSS‑Co is a universal machine tapping kit for metric ISO threads, designed for industrial workshop and maintenance applications HSS‑Co for enhanced wear resistance Universal kit M3–M12 covers common sizes Vapour‑coated for lower friction Tolerance ISO2 (6H) for precision fit Consistent cutting performance for repetitive production The kit is built around HSS‑Co, a cobalt‑alloyed high‑speed steel that offers improved hot‑hardness and wear resistance compared with standard HSS. The combination of this HSS‑Co substrate with a vapour‑coated surface reduces friction and heat build‑up during machine tapping, which extends tool life and stabilises cycle times. The ground flank relief reduces the risk of chatter and promotes cleaner chip evacuation when used in appropriate tapping machines, translating to fewer rejects and less secondary rework. Broad material compatibility and precision to standard Designed to produce ISO metric threads in compliance with DIN 371/376 and DIN 13 sheet 1, the set meets the Tolerance ISO2 (6H) specification for reliable fit in assembly work. The contents cover the most common thread sizes from M3–M12 in a 7‑piece set, making it suitable for machining steel, stainless steel, spheroidal cast iron and non‑ferrous metals. The universal geometry offers a good balance between cutting edge robustness and chip control, which helps maintain dimensional accuracy across mixed‑material batches. Practical advantages that improve workshop flow A universal set of machine taps reduces tool changes and simplifies inventory: one compact kit supplies the majority of small to medium thread demands on a production line or service bench. The characteristic green ring marking aids rapid visual identification of the series, speeding up tool selection during fast‑paced operations. With machine‑grade design and consistent tolerances, the kit supports reproducible thread quality and reduces stoppages caused by incorrect or worn taps. Handling, setup and maintenance explained The taps are intended for machine tapping; correct spindle alignment, feed rate and lubrication are essential for achieving the stated tool life. The vapour‑coated surface lowers adhesion and eases chip flow, but adherence to recommended cutting parameters and coolant or cutting fluid use remains important for stainless and alloyed steels. Storing the kit in its case and checking each tap for wear before use preserves thread quality and protects mating components in assemblies; worn taps should be replaced to avoid damage to threaded parts. Contact Metav Werkzeuge for a tailored recommendation and reliable supply from Emmerich, including delivery times and compatibility advice Technical data Article number: 2000867745NW Name: Machine tap set DIN 371/376 B Universal M3–M12 HSS‑Co vapour‑coated, case, TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Sizes: M3, M4, M5, M6, M8, M10, M12 Quantity: 7 pieces Standard: DIN 371/376 Tolerance: ISO2 (6H) Special features Material: HSS‑Co Coating: vapour‑coated Identification: green ring Geometry: flank relief ground Thread form: ISO metric thread, DIN 13 sheet 1 Type: Universal FAQ What sizes are included in the set? The kit contains one tap each in M3, M4, M5, M6, M8, M10 and M12, supplied as a 7‑piece set (SKU 2000867745NW). Which materials can be machined with these taps? The taps are suitable for machining steel, stainless steel, spheroidal cast iron and non‑ferrous metals, owing to the HSS‑Co cutting material and universal geometry. Is this set suitable for machine tapping? Yes, the set is a machine‑grade tap set designed for use in tapping machines; correct feed and lubrication are recommended for best tool life. What benefit does the vapour coating provide? The vapour‑coated finish reduces friction and improves chip flow, resulting in lower wear and more consistent thread quality during repetitive production. How does the tolerance ISO2 (6H) affect assembly fit? Tolerance ISO2 (6H) ensures a standardised internal thread fit that is compatible with ISO external thread classes, providing predictable assembly behaviour and interchangeability. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a complete M3–M12 tap range combined with HSS‑Co cutting material and matching twist drills for reliable, high‑throughput thread production; order the set directly via Metav Werkzeuge or consult our specialists for application support. TECWERK machine tap set DIN 371/376 – M3–M12, 14‑piece, HSS‑Co (stainless type) The TECWERK machine tap set DIN 371/376 (M3–M12, 14‑piece) is a compact workshop solution that combines machine taps and DIN 338 twist drills to create ready‑to‑use drilling and tapping sequences for stainless applications. Machine taps M3–M12, complete set Cobalt HSS for extended tool life Includes matching DIN 338 twist drills Supplied in sturdy cassette Increased throughput thanks to matched drills and taps The kit is designed to boost machining efficiency by pairing machine taps with the correct twist drills so thread preparation and tapping proceed without guesswork. The combination of HSS‑Co cutting material and standardised dimensions according to DIN 371/376 reduces the risk of tap breakage and minimises rework, which translates into shorter cycle times on production machines. This pragmatic pairing supports predictable process planning and helps maintain steady output in repetitive operations. Complete size range for flexible thread production A full spectrum from M3–M12 ensures that common metric threads are covered without requiring multiple purchases or substitutions. The set includes corresponding DIN 338 drill diameters to match each tap, enabling correct drill‑to‑tap sequences that preserve thread form and tolerance. For technicians and planners, this completeness reduces inventory complexity and avoids downtime caused by missing sizes, making the set a practical choice for mixed‑batch and repair work where versatility matters. Cobalt‑alloy HSS and stainless type for demanding materials The taps and drills are manufactured in HSS‑Co, a cobalt‑alloy high‑speed steel that improves hot hardness and wear resistance compared with standard HSS. As a result, the tooling maintains cutting performance when machining tougher or stainless materials, extending tool life and lowering changeover frequency. Where corrosion resistance of the final component is important, the stainless (VA) type of the set aligns material compatibility with workshop requirements and simplifies selection for stainless‑steel assemblies. Ready for workshop use with clear organisation Delivered as a 14‑piece kit in a practical cassette, the set supports fast tool changes and orderly storage on the shop floor. Labelling of sizes and a defined drill–tap pairing make setup less error‑prone for machine operators and apprentices alike. Backed by Metav’s supply chain presence in Emmerich, the package is intended for teams seeking durable tooling with straightforward logistics and reliable availability for ongoing production demands. Contact Metav Werkzeuge for tailored technical advice on the TECWERK machine tap set and to arrange delivery or specification support via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000867539NW Brand: TECWERK Content: 14‑piece set Facts Size range: M3–M12 Drill diameters (mm): 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 Standards: DIN 371 / DIN 376 / DIN 338 Special features Cutting material: HSS‑Co (cobalt high‑speed steel) Type: VA (stainless version) Includes machine taps and matching twist drills Supplied in a storage cassette FAQ Which sizes are included in the set? The set contains machine taps covering M3–M12 together with matching DIN 338 twist drills; the SKU is 2000867539NW. What cutting material is used for the taps and drills? All cutting tools in the kit are made from HSS‑Co, offering improved wear resistance for extended tool life in demanding applications. Are the drills supplied suitable for stainless applications? Yes, the kit is supplied as a VA (stainless) type and the combination of HSS‑Co and correct drill‑tap pairing supports machining of stainless materials. Which standards do the tools comply with? The taps and drills conform to DIN 371/376 for taps and DIN 338 for twist drills, ensuring dimensional consistency and interchangeability. Is the set suitable for machine tapping operations? The tools are specified for machine use and include machine taps and matching drills to streamline production sequences. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS construction, conformity to DIN standards and the complete component set for efficient, one-pass thread production; order the set directly via Metav Werkzeuge or consult Metav's advisors for application-specific guidance. Thread tap set "Form B" – HSS metric ISO tapping kit by RUKO (M3–M12, incl. twist drills) Thread tap set "Form B" – RUKO is a compact tapping kit designed for machining metric ISO through threads in unalloyed and low-alloy steels; suitable for both hand and machine use. HSS taps for unalloyed and low-alloy steels Includes core twist drills DIN 338 Type N One-pass cutting for hand and machine use Adjustable DIN 1814 tap wrench included Consistent, standard-compliant thread results for production The kit is engineered to meet DIN 352 requirements and to produce metric ISO threads reliably in through-hole applications. The use of high-speed steel (HSS) taps ensures consistent performance under typical workshop conditions, while the specification for machining steels up to 800 N/mm² gives a clear performance envelope. Because the taps are suitable for one-pass cutting in both manual and machine operations, cycle times can be reduced and process steps simplified, making the set a pragmatic choice for maintenance bays and small-series production alike. Ready-to-use set speeds up setup and reduces downtime This threading kit contains one-cut taps for sizes M3, M4, M5, M6, M8, M10 and M12, matched with corresponding core twist drills (DIN 338 Type N Ø 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm) and an adjustable tap wrench (DIN 1814, Gr. 1 1/2). Having appropriately sized drills paired with each tap removes guesswork at the bench and reduces the risk of incorrect pre-drilling. The balanced composition of the kit supports faster changeovers and fewer interruptions to the machining process, which contributes to steady throughput and predictable output quality. Practical handling and tool-life considerations The HSS construction offers a robust compromise between toughness and wear resistance for general-purpose tapping in unalloyed and low-alloy steels. The tap geometry stated as Form B with the specified cutting relief provides reliable chip formation for through threads, while the included twist drills (HSS-G) prepare the correct core diameter for optimal tap engagement. Proper lubrication and machine speeds aligned with material hardness will extend tool life; the clear numeric limits given (up to 800 N/mm²) allow straightforward process planning without extensive testing. Suitable for workshop and light industrial environments Packed as a single unit and intended for both manual and machine tapping, the kit is a practical addition to workshop inventories. The combination of standardised parts and the adjustable tap wrench supports flexible application scenarios, from repair work to small-batch production. Metav's positioning as a precision partner means availability and reliable fulfilment from Emmerich — a decisive advantage when integrating the kit into a broader tooling strategy where predictable supply and expert advice matter. Secure technical advice and local availability from Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific materials and applications Technical data Article number: 8000421314NW Packaging unit: 1 UID: 8000421314NW Facts Tap sizes: M3, M4, M5, M6, M8, M10, M12 Drill diameters (mm): 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 Material strength suitability: up to 800 N/mm² Standards: DIN 352, DIN 338, DIN 1814 Special features High-speed steel (HSS) taps Metric ISO threads for through holes One-pass cutting usable by hand and machine Core twist drills DIN 338 Type N HSS-G included Adjustable tap wrench DIN 1814 Gr. 1 1/2 included Intended for unalloyed and low-alloy steels FAQ What materials can be machined with this tapping kit? The tapping kit is designed for unalloyed and low-alloy steels and rated for use up to 800 N/mm²; the HSS taps and matching twist drills support those material classes. Are the correct twist drill diameters included for each tap size? Yes, the set contains core twist drills (DIN 338 Type N) sized to match the taps: Ø 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm for the respective tap sizes M3–M12. Can the taps be used in a machine as well as by hand? The taps are specified for one-pass cutting in both manual and machine operation, enabling flexible use in workshops and light production environments. What standard and form do the taps comply with? The taps conform to DIN 352 and produce metric ISO threads; the set follows the Form B geometry for the stated applications. Does the set include a tap wrench, and which standard does it follow? An adjustable tap wrench (DIN 1814, Gr. 1 1/2) is included, facilitating manual tapping and secure clamping of the taps. Ruko GmbH: Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen

Benefit from a universal HSS‑Co tap set covering M3–M12 and conforming to DIN 371/376 for dependable metric thread production; order the set directly via Metav Werkzeuge or consult the team for tailored application advice. Machine Tap Set DIN 371/376 C Univ. M3–M12 HSS‑Co — TECWERK machine taps The Machine Tap Set DIN 371/376 C Univ. M3–M12 HSS‑Co is a compact, universal set engineered for precise cutting of metric ISO threads in both through and blind holes across a wide range of workshop materials. HSS‑Co for high wear resistance Universal set for blind and through threads Tolerance class ISO2 (6H) for tight fit Green ring identification for quick selection Consistent ISO‑accurate thread formation for production use This set delivers repeatable thread quality thanks to compliance with DIN 371/376 and the DIN 13 Sheet 1 metric thread profile. The included taps cover M3–M12, allowing straightforward standardisation across typical assembly operations. With a specified tolerance class ISO2 (6H) the set supports reliable mating with ISO‑specified bolts and screws; this reduces rework and ensures interchangeability in serial production. The combination of standard conformity and a universal configuration makes the kit suitable for systematic workshop processes and quality control routines. Robust cutting performance across mixed materials Manufactured from HSS‑Co (cobalt high‑speed steel), the taps tolerate elevated temperatures and provide extended life when machining demanding alloys. The tools are vapourised and feature a green ring identifier, while the flanks are relief ground to aid chip formation and reduce jamming. These characteristics improve performance in stainless steel, steel and a range of non‑ferrous materials, including spheroidal graphite cast iron. For engineers and production planners, this means fewer tool changes and steadier cycle times when processing mixed batches. Compact set composition to streamline workflow The seven‑piece arrangement contains machine taps to cover the most common metric sizes, with each tool marked for quick selection and a combination of through‑hole and bottoming types where required. The set reduces inventory complexity by consolidating frequently used sizes into one kit, speeding up job setup and lowering the risk of selecting incorrect tools. Identification by the green ring and the uniform tolerance class make it simpler for workshop personnel to maintain consistent thread quality under time pressure. Practical handling and maintenance guidance for longevity Appropriate spindle speeds, correct use of cutting fluids and consistent chip evacuation are decisive for long service life with HSS‑Co taps. Periodic inspection for wear and regrinding where feasible will preserve thread accuracy; damaged taps should be replaced to avoid compromised threads. The universal design supports straightforward replacement during preventive maintenance cycles and integrates well with existing tapping heads and automatic feed systems. Combined with Metav’s supply reliability, the set supports a predictable procurement flow and reduces the administrative burden of sourcing individual sizes. Contact Metav Werkzeuge for specification support and to arrange supply of the TECWERK machine tap set directly from Emmerich, ensuring prompt fulfilment and expert advice on application optimisation. Technical Data Article number: 2000867747NW Label: Maschinengewindebohrerset DIN 371/376 C Univ.M3-M12 HSS-Co vap.Ku.-Kass.TECWERK Packaging unit: 1 UID: 2000867747NW Facts Thread sizes: M3–M12 Content: 7 pieces Tolerance class: ISO2 (6H) Standard: DIN 371/376; DIN 13 Sheet 1 Special features Material: HSS‑Co Type: Universal Coating/process: Vapourised Identification: Green ring Flank relief ground Suitable for: Steel; stainless steel; spheroidal graphite cast iron; non‑ferrous metals FAQ What sizes are included in the set? The set includes machine taps covering M3–M12 as specified on the TECWERK Machine Tap Set DIN 371/376 C Univ. M3–M12 HSS‑Co (SKU 2000867747NW). Which materials can be machined with these taps? These taps, made from HSS‑Co, are suitable for steel, stainless steel, spheroidal graphite cast iron and a variety of non‑ferrous metals, enabling flexible use in mixed‑material production. Do the taps conform to recognised standards? Yes, the taps conform to DIN 371/376 and follow the metric thread form of DIN 13 Sheet 1, offering ISO‑compatible threads with tolerance class ISO2 (6H). Is the set suitable for blind holes? The universal set contains both through and bottoming types compliant with the DIN designations, making it suitable for blind‑hole and through‑hole tapping operations in machine applications. How should the tools be maintained to ensure long life? Use appropriate cutting speeds, adequate lubrication and ensure chip clearance; inspect taps regularly for wear and replace damaged items to maintain the thread quality promised by the TECWERK set. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust HSS toolset that covers metric threads M3–M12, with a comprehensive assortment of taps, dies and holders for both through and blind holes — ideal for workshop versatility and reduced tool changeover. Order directly via Metav Werkzeuge or consult our specialists for technical guidance. Ruko Thread Cutting Set M3–M12 (44-piece) – HSS workshop threading kit Ruko Thread Cutting Set M3–M12 is a complete HSS threading kit for producing metric threads in unalloyed and low-alloy steels, malleable cast iron and non-ferrous metals in workshop and maintenance environments HSS cutting material for durability Covers metric threads M3 to M12 Includes taps, dies and holders For unalloyed and low-alloy steels Consistent thread quality through durable HSS cutting edges The set is built around HSS cutting tools that retain hardness and edge stability in typical workshop conditions, resulting in repeatable, burr-free threads. The combination of high-speed steel and standardised geometries ensures clean chip formation and predictable cutting forces, which supports cycle-time reduction on manual and semi-automatic operations. For machining unalloyed steel and low-alloy steel up to 800 N/mm², the robust cutting material minimises wear and extends service intervals, translating directly into lower tooling costs over time. Comprehensive kit design for flexible workshop applications Supplied components include metric taps to DIN 352, round dies to DIN EN 22568, a set of die holders, adjustable die stocks and a thread gauge, together with core twist drills to DIN 338 Type N. This coordinated assortment permits both repair and production tasks without additional purchases. The presence of purpose-sized holders and an adjustable die stock means that threading can be set up quickly and held securely, reducing set-up errors and improving throughput for mixed batch work. Practical handling reduces downtime and simplifies processes Die holders in several widths and the adjustable stock sizes allow immediate adaptation to different rod diameters and clearance conditions, while the included core twist drill sizes match the tap diameters for precise pilot holes. The ergonomic die holders and the adjustable stock enable efficient manual threading in both through threads and blind holes, shortening process steps and lowering the risk of cross-threading. This pragmatic design supports workshop staff in maintaining a steady workflow with fewer interruptions. Standards, compatibility and workshop benefits explained Adherence to DIN 352 for taps and DIN EN 22568 for dies guarantees interchangeability with existing tooling and clarity when replacing individual items. The kit’s inclusion of a thread gauge and a screwdriver helps validate thread quality immediately at the bench, reducing rework. For operations that require machining malleable cast iron or non-ferrous metals, the diverse tool geometries included provide correct chip evacuation and surface finish, allowing both maintenance crews and small-scale production teams to rely on consistent results. For reliable threading performance with Ruko HSS tools, contact Metav Werkzeuge for ordering or to obtain further technical advice at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 8000421445NW Manufacturer: Ruko GmbH Content: 44-piece Material: HSS Facts Thread range: M3–M12 Applicable strength: up to 800 N/mm² Twist drill diameters: 2.5 / 3.3 / 4.2 / 5 / 6.8 / 8.5 / 10.2 mm Die holder widths: 20×5, 20×7, 25×9, 30×11, 38×14 mm Special features For through threads and blind holes Taps to DIN 352 Dies to DIN EN 22568 Adjustable die stock sizes 1+2 Includes thread gauge and screwdriver Suitable for unalloyed steels, low-alloy steels, malleable cast iron and non-ferrous metals FAQ Which materials can be machined with this thread cutting set? The Ruko thread cutting set is suitable for unalloyed steel, low-alloy steel (up to 800 N/mm²), malleable cast iron and common non-ferrous metals. Are the taps and dies standardised for replacement or extension? Yes, taps conform to DIN 352 and dies to DIN EN 22568, allowing straightforward replacement with standard components. Does the set include drill sizes for correct pilot holes? Core twist drills to DIN 338 Type N in the supplied diameters are included to match the corresponding taps. Is the kit ready for both production and repair work? The 44-piece configuration of taps, dies, holders and measuring tools makes the set suitable for workshop repair and small-batch production tasks. What accessories are included to ensure correct threading? The kit contains adjustable die stocks, multiple die holders, a screwdriver and a thread gauge to verify thread dimensions on the bench. Manufacturer/Responsible: Ruko GmbH Präzisionswerkzeuge, Robert-Bosch-Strasse 7, 71088 Holzgerlingen

Take advantage of the HSS cutting material and the full metric range M3–M12 for consistent manual threading results; the set combines durable tools with a complete selection of taps, dies and holders for efficient workshop workflows. Order the set directly via Metav Werkzeuge or contact the consultants for application advice. Thread Cutting Set M3–M12 – TECWERK, HSS hand-threading kit Thread Cutting Set M3–M12 TECWERK — a compact manual threading toolkit designed for workshop and maintenance tasks across metric sizes M3 to M12. HSS cutting material for long life Coverage for metric threads M3–M12 Adjustable tap wrenches and holders included Twist drills and thread gauge for precise preparation Durable cutting performance for reliable results The kit is built around HSS cutting tools that keep geometry and sharpness under frequent manual use. Hand taps manufactured to DIN 352 and cutting dies to DIN EN 22568 ensure conformity with common European threading standards, which supports repeatable hole preparation and thread forming. The combination of standardised taps and dies reduces setup times and delivers consistent thread profiles, making the set suitable for routine repair and maintenance operations where reliable threads are required. Complete tooling for the full manual threading process This toolkit contains a coordinated set of hand taps, cutting dies, a range of die holders, adjustable tap wrenches (sizes 1 and 2), and a selection of twist drills to match pilot hole requirements. Also included are a tool holder, screwdriver, and thread gauge, plus a manual describing the sequence for safe thread cutting. Having matched holders and wrenches alongside gauge verification simplifies manual workflows by keeping all essential items together, reducing tool changeovers and potential errors in size selection. Standards, preparation and practical guidance Core drills conform to DIN 338 HSS‑G and are supplied in a range of diameters (Ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm) to allow correct pilot-hole preparation prior to tapping. Using a dedicated pilot drill matched to the thread pitch helps centre the tap and reduces risk of cross-threading; light cutting lubricant extends tool life and improves finish. The included thread gauge supports final inspection, while standardised dimensions and holders make the set interoperable with existing workshop jigs and fixtures. Choose the TECWERK thread cutting set for robust manual threading and contact Metav Werkzeuge for procurement and technical guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: 2000806022NW UID: 2000806022NW Manufacturer: TECWERK Packaging unit: 1 Cutting material: HSS Facts Thread range: M3–M12 Twist drill diameters: Ø 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm Content count: 52 pieces Special features Hand taps DIN 352 M3, M4, M5, M6, M8, M10, M12 Cutting dies DIN EN 22568 M3–M12 Guides DIN EN 22568 M3–M12 Die holders 20×5, 20×7, 25×9, 30×11, 38×14 Adjustable tap wrenches size 1 and 2 Core twist drills DIN 338 HSS‑G Tool holder, screwdriver, thread gauge, manual FAQ Which thread sizes are covered by the kit? The kit covers metric thread sizes from M3 to M12, with matching taps and dies for each nominal size. Are the twist drills included suitable as pilot drills for the taps? Yes, the supplied twist drills conform to DIN 338 HSS‑G and are specified to provide correct pilot holes for subsequent tapping. What standards do the taps and dies follow? Hand taps are specified to DIN 352 and cutting dies to DIN EN 22568, ensuring standard thread forms and compatibility with common inspection gauges. Is a thread gauge included for verification? A thread gauge is part of the set and supports final inspection of the produced threads. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a compact, workshop-ready threading kit that combines HSS cutting performance with a full M3–M12 metric range and organised storage for faster job completion; order the set directly via Metav Werkzeuge or ask the consultants for technical guidance. TECWERK Thread Cutting Set M3–M12, 44-piece, HSS The TECWERK Thread Cutting Set M3–M12, HSS is a comprehensive hand tapping and die set designed for metric thread production and repair tasks in general workshop and maintenance environments. HSS cutting material for long tool life Complete M3–M12 metric range 44-piece set in robust plastic case Includes taps, dies, holders and twist drills Faster workflow through a wide metric range The set delivers a ready-to-use M3–M12 range in a single kit, reducing downtime caused by searching for individual tools. With HSS cutting material and a 44-piece configuration, the kit supports repeated workshop use while keeping tool changes and setup time to a minimum. The compact organisation of components helps maintain order at the bench and ensures that thread production or repair operations proceed without unnecessary interruption. Reliable thread quality from matched taps and dies Supplied with matched taps and dies, manufactured to recognised standards (including DIN 352 for hand taps and DIN 22568 for dies), the set enables consistent thread geometry and repeatable results. The three-piece hand tap sets cover taper, intermediate and bottoming stages, which eases progressive cutting and reduces risk of tap breakage in blind or through holes. This configuration benefits both occasional maintenance and regular production tasks by improving thread accuracy and service life. Accessories that reduce setup time and improve handling A selection of die holders (20 x 5, 20 x 7, 25 x 9, 30 x 11, 38 x 14) and adjustable die stocks (sizes 1 and 2) are included to accommodate different die widths and enable secure clamping during manual cutting. The kit also contains a screwdriver, a thread gauge for quick verification and a set of core twist drills (Ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 mm) to produce correct pilot holes. These accessories reduce the need for additional purchases and simplify task sequencing at the bench. Built for workshop reliability and routine maintenance As a practical toolset for general workshop use, the kit balances robustness and portability. The HSS cutters offer wear resistance for repeated sharpening and regrinding where appropriate, while the integrated plastic case keeps components protected and transportable. For maintenance shops and service technicians, the set is a versatile baseline that covers a wide range of metric threading jobs without the complexity of large, specialised inventories. For reliable metric threading across M3–M12, choose the TECWERK 44-piece HSS set and contact Metav Werkzeuge in Emmerich for tailored advice and rapid dispatch via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867548NW Manufacturer: TECWERK Contents: 44 pieces Cutting material: HSS Data Thread range: M3–M12 Core twist drill diameters: Ø 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm Pieces in set: 44 Packaging unit: 1 Accessories & standards 3-piece hand taps per DIN 352 for M3–M12 Dies per DIN 22568 for M3–M12 Die holders: 20 x 5, 20 x 7, 25 x 9, 30 x 11, 38 x 14 Adjustable die stocks sizes 1 and 2 Screwdriver and thread gauge included Core twist drills included Storage case (plastic) FAQ What thread sizes are covered by this kit? The TECWERK Thread Cutting Set covers metric thread sizes from M3 to M12, providing a continuous working range for typical workshop applications. Which standards do the taps and dies comply with? The hand taps are supplied to DIN 352 and the dies to DIN 22568, ensuring compatibility with standard metric thread specifications and predictable fit. Are pilot drills included for correct hole preparation? Yes, the kit contains core twist drills in diameters Ø 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 and 10.2 mm to match the respective thread sizes in the set. Does the set include holders and adjustable tools for dies? The set includes multiple die holders and two adjustable die stocks (sizes 1 and 2) to secure dies of different widths during manual threading operations. Is the cutting material suitable for repeated use and sharpening? The tools are manufactured from HSS, which is designed for durability in hand tapping and die work and allows for resharpening where appropriate to extend service life. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS cutting performance, a complete M3–M12 range and organised storage in a metal case for efficient workshop threading; order directly via Metav Werkzeuge or request technical advice when needed. Thread Tap Set DIN 352 M3–M12 (16-piece) — HSS taps in metal case | EXACT The Thread Tap Set DIN 352 M3–M12 (16-piece) is a professional HSS tap set designed for reliable internal thread production in workshop and maintenance environments. HSS high-speed steel, industrial quality Conforms to DIN 352 standard Includes tap wrench and tool holder Supplied in robust metal case Precision threading made simple for everyday workshop use The set is built to deliver consistent thread quality across a wide size range. Manufactured to DIN 352, the taps offer standardised geometry that supports predictable tapping results in repeated production tasks. The use of HSS (high-speed steel) provides a balance between hardness and toughness, reducing the risk of premature wear while maintaining cutting performance; this makes the set suitable for routine threading in general engineering and maintenance. Clear standard compliance helps planners and buyers evaluate compatibility with existing tooling and inspection routines. Complete size coverage reduces set changes and setup time Covering sizes from M3–M12 with paired taps per size, the kit supplies the most commonly required thread dimensions in a compact package. The organised arrangement minimises time spent searching for the correct tool and reduces machine downtime associated with frequent tool swaps. With two taps per size, shops benefit from a simple backup strategy for high-use threads, supporting steadier throughput and fewer interruptions in production planning. Robust storage protects tools and eases transport Delivered in a metal case, the set is protected during storage and transit, preserving cutting edges and maintaining order on the workbench. The case design supports easy visual inventory checks and safe transport between job sites. Durable packaging extends tool life by limiting exposure to moisture and impact, thereby preserving the HSS cutting surfaces and ensuring consistent performance over longer service intervals. Practical accessories for immediate use and safe operation Including a tap wrench and a tool holder, the kit is ready for immediate integration into manual and benchtop operations. The accessories simplify initial setup and secure the taps during use, reducing the chance of slippage and improving operator confidence in routine threading tasks. The combination of taps and accessories contributes to a faster ramp-up on jobs and a lower requirement for additional purchases. For workshop-grade threading solutions rely on the EXACT HSS tap set and contact Metav Werkzeuge for order and technical consultation at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 4000867532NW Item: Thread Tap Set DIN 352 M3–M12 (16-piece), HSS Packaging unit: 1 Manufacturer name: EXACT GmbH & Co. KG Präzisionswerkzeuge Facts Size range: M3–M12 Pieces: 16 Standard: DIN 352 Special features Cutting material: HSS Contents: two taps each M3, M4, M5, M6, M8, M10 and M12; tap wrench; tool holder Case: metal case Quality: industrial quality FAQ What sizes are included in the set? The set covers the range M3–M12 with two taps provided for each size to support continuous shop use. Is the tap geometry standardised for interchangeability? Yes, the taps are manufactured to DIN 352, ensuring standardised geometry for predictable results and easier replacement. What material are the taps made from? The taps are produced from HSS (high-speed steel) for a balanced mix of wear resistance and toughness suitable for general workshop threading. Does the kit include accessories for immediate use? The kit contains a tap wrench and a tool holder, enabling immediate manual tapping tasks without additional purchases. How is the kit supplied for storage and transport? The set is supplied in a metal case that protects the taps and organises the contents for fast identification and safe transport. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com

Benefit from high-grade HSS cutting, DIN 352 conformity and a complete M3–M12 size spread for consistent metric threading; order the Tap set DIN 352 M3–M12 directly via Metav Werkzeuge or ask our consultants if needed. Tap set DIN 352 M3–M12, 21-piece HSS by TECWERK A Tap set DIN 352 M3–M12 designed for manual production of metric ISO threads in workshop and maintenance applications. DIN 352 hand taps High-speed steel (HSS) cutting material Metric ISO threads M3–M12 Complete 21-piece set Consistent, standard-compliant threading for production use The set is built to the DIN 352 specification, which ensures reproducible thread geometry and compatibility with international metric ISO threads. Manufactured from HSS, the taps provide a balance of hardness and toughness that supports reliable cutting performance for hand tapping tasks. The standardised design reduces the risk of mismatch when replacing worn tools, so thread form and fit remain consistent across batches—benefits that support predictable assembly and reduced rework in daily workshop routines. Comprehensive selection that streamlines tool inventory The 21-piece composition covers the common small to medium metric thread range M3–M12, making the set a practical stock item for maintenance shops and small-scale production. Having all required hand taps in one kit minimises procurement overhead and simplifies job planning, which can shorten downtime and increase throughput. Organisation and rapid access to the correct tap reduce search time between operations, contributing to a more efficient workflow and better utilisation of personnel time. Practical handling, durability and care guidance Hand taps in this set are intended for conventional manual tapping; the cutting material HSS withstands typical workshop use and can be maintained by regrinding where appropriate. For best results, taps are to be used with suitable cutting lubricant and incremental cutting passes when forming deeper or blind threads; this approach prolongs tool life and maintains thread accuracy. The toolset’s construction focuses on robustness and repeatability, supporting everyday use without complex maintenance routines. For reliable metric threading with TECWERK quality, secure this Tap set via Metav Werkzeuge or contact Metav Werkzeuge’s specialists for tailored technical advice. Technical data Article number: 2000867522NW SKU: 2000867522NW Brand: TECWERK Packaging unit: 1 Facts Pieces: 21 Sizes: M3, M4, M5, M6, M8, M10, M12 Special features Cutting material: HSS Standard: DIN 352 Thread form: metric ISO threads Type: hand taps set FAQ What sizes are included in the set? The set contains taps for M3, M4, M5, M6, M8, M10 and M12 as part of the complete 21-piece kit (SKU 2000867522NW) from TECWERK. Is the kit compliant with any standard? Yes, the taps are manufactured to DIN 352, ensuring standard-compliant geometry for metric ISO threads. What material are the taps made from? The cutting material is HSS, chosen for a balance of wear resistance and toughness suited to hand tapping. Can these taps be used for production and repair work? The set is intended for workshop production and maintenance tasks where manual taps are appropriate; repeatable thread quality is delivered by the DIN 352 design. Are there maintenance recommendations for prolonging tool life? Use appropriate cutting fluid, clear chips frequently and avoid excessive torque; regrinding is possible for worn HSS taps when dimensional tolerances permit. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a compact, workshop-ready set that combines HSS cutting material, adherence to DIN 352 and complete size coverage for metric ISO threads M3–M12; the included twist drills and an adjustable tap wrench streamline setup and reduce downtime. Order via Metav Werkzeuge or consult our specialists for delivery and technical guidance. TECWERK thread tap set DIN 352 M3–M12, 29-piece (HSS) A TECWERK thread tap set designed for metric ISO threads M3–M12, supplying taps, matching twist drills and an adjustable tap wrench for workshop and maintenance tasks HSS taps to DIN 352 Covers metric ISO threads M3–M12 Includes matching twist drills DIN 338 Adjustable tap wrench Gr. 1 1/2 included Faster threading with full size coverage The 29-piece kit provides a coherent workflow: hand taps to DIN 352 for M3–M12 threads together with the corresponding twist drills to DIN 338 eliminate guesswork when selecting pre-drill sizes. With clearly defined drill diameters (Ø 2.5 / 3.3 / 4.2 / 5.0 / 6.8 / 8.5 / 10.2 mm) and the complete set of hand taps, set-up time is reduced and thread preparation becomes predictable. This consistency supports efficient small-batch production and routine maintenance, as cutting sequences and clear drill-to-tap matching minimise rework and interruptions. Durable HSS construction for repeated workshop use Made from HSS, the tooling offers a balance of toughness and edge stability suited to general workshop applications. High-speed steel maintains cutting performance across repeated hand operations, which helps preserve dimensional accuracy in internal threads. The material choice contributes to longevity under normal workshop conditions and supports reliable thread form generation when used with appropriate cutting lubricant. The combination of standardised DIN specifications and HSS construction ensures interchangeability with existing tools and straightforward integration into tool inventories. Practical handling that reduces process steps The kit includes an adjustable tap wrench (Gr. 1 1/2) which enables secure torque application for hand tapping and better control on alignment, reducing the risk of cross-threading. All components are organised to allow quick selection of the required size, so fewer tool changes are necessary during multi-size projects. For operators less familiar with thread preparation, the set’s matched drill-to-tap pairing clarifies the drilling step and helps avoid incorrect pilot hole sizes that can compromise thread strength. Who benefits: workshops, service engineers and small manufacturers This thread tap set is aimed at maintenance departments, trade workshops and small manufacturers that require a compact, standards-based solution for metric internal threads. The kit’s adherence to metric ISO sizing and DIN standards makes it suitable for repairs, prototyping and small-series production tasks where dependable thread quality and rapid changeover are priorities. For businesses seeking to rationalise tool stocks, the set serves as a practical all-in-one option that covers the most common metric thread sizes. For purchasing advice, delivery options from Emmerich or assistance with suitability for a specific application, contact Metav Werkzeuge — the experienced partner for precision tools — at info@metav-werkzeuge.com or +49 2822 7131930 and request SKU 2000867550NW for prompt handling Technical Data Article number: 2000867550NW Label: Gewindebohrersatz DIN 352 M3-M12 29tlg.HSS TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867550NW Facts Thread sizes: M3, M4, M5, M6, M8, M10, M12 Drill diameters (mm): 2.5, 3.3, 4.2, 5.0, 6.8, 8.5, 10.2 Total pieces: 29 Special features Cutting material: HSS Taps standard: DIN 352 (hand taps) Twist drills standard: DIN 338 Contents: hand taps set M3–M12, matching twist drills, adjustable tap wrench Gr. 1 1/2 FAQ What sizes are included in the set? The TECWERK thread tap set includes hand taps for M3, M4, M5, M6, M8, M10 and M12 plus matching twist drills and an adjustable tap wrench (SKU 2000867550NW). Are the drills and taps to recognised standards? Yes, the taps conform to DIN 352 and the twist drills are to DIN 338, ensuring compatibility with standardised workshop practices. Is the cutting material suitable for repeated hand tapping? The kit’s HSS construction is specified for general workshop use and provides a durable option for repeated manual tapping operations. Does the set include a tap wrench? An adjustable tap wrench (Gr. 1 1/2) is included to support correct alignment and controlled torque during hand tapping with the set. Can this set be used for production as well as maintenance? The set is well suited to maintenance, prototyping and small-series production where standard metric ISO threads and repeatable quality are required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a complete, workshop-ready HSS thread cutting kit that covers the most common metric sizes and keeps maintenance efficient; order the TECWERK set directly via Metav Werkzeuge or consult the sales team for procurement advice. TECWERK Thread cutting set M3–M20 — HSS, 54-piece workshop kit The Thread cutting set M3–M20 is a robust HSS hand tap and die kit designed for general workshop thread cutting, repair and maintenance tasks across a wide range of common metric sizes. HSS taps and dies for robust cutting Range M3–M20 covers common threads Includes adjustable tap wrenches and holders Complete 54-piece workshop kit Faster thread production with industrial-grade HSS The kit is built around HSS cutting tools, offering a balance of durability and cutting performance that supports frequent use in maintenance and light production settings. The broad M3–M20 range reduces tool changes and inventory complexity, enabling quicker set-up and fewer interruptions to workflow. For users who value consistency, the hardened cutting edges maintain geometry longer than standard carbon-steel tools, which translates into predictable thread quality and less rework. Everything required for on-site repairs and workshop tasks Contents are arranged to enable immediate use: three-piece hand taps, matching dies, a selection of die holders, adjustable tap wrenches in two sizes, plus a screwdriver and a thread gauge for verification. The 54-piece composition provides both tapping and threading capability for common maintenance operations, making the kit suitable as a compact all-in-one solution for service engineers and workshop technicians who need a reliable set without sourcing individual items. Conformance to established tool standards for consistent results Taps are specified to DIN 352 and the dies to EN 22568, indicating adherence to recognised European tool geometries and tolerances. These standards help ensure that threads produced with the kit are compatible with widely used fasteners and mating parts, reducing the risk of fitment issues. Clear labelling and standardised dimensions support traceability and repeatability across different operators and shifts. Practical design for daily use and tidy storage The set is supplied in a compact storage cassette that keeps individual tools accessible and protected between uses. Selected die holders in multiple shank widths allow safe clamping of dies while adjustable tap wrenches accommodate a variety of tap sizes for flexible operation. This organisation supports faster job preparation and safer handling, contributing to an orderly workshop environment and extended tool life through correct storage. Contact Metav Werkzeuge for tailored advice on integrating the TECWERK HSS thread cutting set into workshop inventory and to ensure reliable supply from Emmerich to the workbench. Technical Data Article number: 2000867579NW Manufacturer: TECWERK Designation: Gewindeschneidzeugsatz M3-M20 54tlg.HSS Ku.-Kass.TECWERK UID: 2000867579NW Packaging unit: 1 Facts Range: M3–M20 Pieces: 54 Material: HSS Special features Hand taps 3-piece DIN 352 for M3–M20 Dies EN 22568 for M3–M20 Die holders: 20 x 5, 20 x 7, 25 x 9, 30 x 11, 38 x 14, 45 x 18 Adjustable tap wrenches sizes 1 and 3 Includes screwdriver and thread gauge Plastic storage cassette FAQ What is included in the kit? The kit contains 54 items: three-piece hand taps for each size from M3 to M20, matching dies, multiple die holders, two adjustable tap wrenches, a screwdriver and a thread gauge, supplied in a plastic storage cassette. Are the taps and dies made of high-speed steel? Yes, the taps and dies in the TECWERK thread cutting set are made of HSS, providing improved wear resistance and longer service life compared with untreated carbon-steel tooling. Which standards do the tools conform to? Taps are specified to DIN 352 and the dies to EN 22568, ensuring consistent geometries and compatibility with standard metric fasteners. Which die holder sizes are supplied with the set? The set includes die holders in the following shank widths: 20 x 5, 20 x 7, 25 x 9, 30 x 11, 38 x 14 and 45 x 18. Can this kit serve as a workshop starter set for maintenance tasks? Yes, the comprehensive scope from M3–M20 and the inclusion of wrenches, holders and a thread gauge make the set suitable as a compact starter solution for workshop maintenance and repair assignments. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund