Take advantage of the HSS cutting material and DIN EN 24231 conformity for consistent, high-quality thread profiles; the closed, pre-slotted Form B reduces chip build-up and ensures reliable cutting in steels up to ≈800 N/mm². Order the die directly via Metav Werkzeuge or ask our consultants if needed. Die Form B G 1in x11 HSS A — TECWERK A Die Form B G 1in x11 HSS A for producing parallel Whitworth pipe threads (G) to DIN standards, designed for workshop and industrial use. High-speed steel cutting material HSS Conforms to DIN EN 24231 standard For steels up to approx 800 N/mm² Closed, pre-slotted Form B, 18 mm height Consistent pipe-thread quality through standards-based design The DIN EN 24231 conformity combined with the thread specification to DIN ISO 228 delivers predictable mating results for parallel pipe threads. Specification tolerance A indicates a tighter dimensional tolerance, which translates into more consistent fits and fewer rejects during assembly. For procurement and production planning this means reduced rework and a more predictable assembly process. The combination of standard compliance and measured tolerances supports traceable quality in repetitive manufacturing operations. Durable cutting performance and material suitability Manufactured from HSS, the tool offers a balance of toughness and wear resistance appropriate for serial workshop use. The geometry is optimised to cut Whitworth parallel pipe threads G and is suitable for steels with tensile strengths of up to ≈800 N/mm², ensuring effective performance on commonly used construction and engineering steels. The closed, pre-slotted Form B design assists chip evacuation and stabilises the cutting edges, which extends service life and reduces the frequency of regrinding or replacement. Efficiency and handling benefits on the shop floor The compact 18 mm section height and robust Form B construction provide a stable engagement with the workpiece, lowering the risk of tool run-out and improving thread concentricity. Time savings arise from fewer corrective operations and consistent first-pass cuts; this rational advantage supports higher throughput in small-batch and maintenance tasks alike. The tool’s specification is straightforward to integrate into existing tooling lists and maintenance schedules, enabling clear stock-keeping and reorder planning. Selecting and maintaining the right die for the task The size designation (G 1in x11) denotes a parallel Whitworth pipe thread with 11 threads per inch; compatibility with mating connectors follows the DIN ISO 228 convention for parallel pipe threads. For optimal results, match the die to the material’s tensile rating and use appropriate cutting lubricant for steel to preserve the HSS cutting edges. Regular inspection for wear and light regrinding when necessary will preserve thread quality and extend usable life, providing long-term cost-efficiency for the workshop. Discuss application requirements or secure the TECWERK die through Metav Werkzeuge’s consultancy—contact Metav Werkzeuge in Emmerich for technical advice or to arrange a supply. Technical data Article number: 2000867785NW Item: Schneideisen Form B G 1 Zollx11 HSS A TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867785NW Facts Height: 18 mm Material strength capacity: approx 800 N/mm² Thread size: G 1 in × 11 tpi Tolerance field: A Special features Cutting material: HSS Standard: DIN EN 24231 Whitworth parallel pipe thread G to DIN ISO 228 Closed, pre-slotted Form B FAQ What materials is this die suitable for? The Die Form B G 1in x11 HSS A is specified for use on steels up to approximately 800 N/mm² tensile strength and performs reliably within that range. Which standards does this tool comply with? This TECWERK die conforms to DIN EN 24231 and cuts threads according to DIN ISO 228 for parallel Whitworth pipe threads (G), with tolerance field A. What does 'closed, pre-slotted Form B' mean in practice? Closed, pre-slotted Form B describes a die geometry that maintains full flank support while providing slots to allow chip passage, reducing jamming and improving surface finish on produced threads. How is the thread size G 1in x11 interpreted? The designation indicates a parallel Whitworth pipe thread G with a nominal 1 inch size and 11 threads per inch; mating parts should comply with DIN ISO 228 for compatibility. Can the die be reconditioned after wear? The HSS cutting edges can be carefully re-sharpened in line with workshop practices; observing correct geometry and preparation will preserve thread quality and extend tool life. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a precision-engineered solution that combines high-speed steel construction, conformity to recognised standards and a compact 11 mm height for stable thread cutting. The result is reliable Whitworth pipe-thread production in medium‑strength steels with straightforward handling — order directly via Metav Werkzeuge or request technical guidance from our consultants. TECWERK Threading Die Form B G 1/8" x 28 — HSS, Tolerance A The TECWERK Threading Die Form B G 1/8" x 28 HSS A is a closed, pre‑slotted high‑speed steel die designed for cutting parallel Whitworth pipe threads in workshop and industrial settings. HSS cutting material for durability Conforms to DIN EN 24231 standard Whitworth pipe thread G per DIN ISO 228 Tolerance field A for precise fit Consistent thread quality for pipe connections The closed, pre‑slotted design delivers stable cutting edges and controlled chip formation, which helps to maintain geometric accuracy across repeated operations. Conformance with DIN EN 24231 and the specification for Whitworth pipe thread G ensures compatibility with standard parallel pipe fittings, while the Tolerance A grade gives predictable thread fit. For production environments that prioritise repeatability, this die supports consistent assembly and reduces rework. Built for medium‑strength steels and everyday workshop use Manufactured from HSS (high‑speed steel), the tool is suitable for threading components made from steels up to around 800 N/mm² tensile strength. This makes it a practical choice for general maintenance, plumbing installations and small‑batch fabrication where tough, wear‑resistant cutting edges are required. The compact 11 mm height enables use in confined holders and die stocks, preserving rigidity without excessive bulk. Clear standards and straightforward selection Specification details such as thread designation G 1/8" x 28, standard conformity and material rating simplify purchasing decisions. Where uncertainty exists about compatibility with existing fittings or materials, selecting a die that adheres to recognised standards reduces integration risk. The tool’s Form B profile provides a predictable thread form for typical pipe‑threaded joints, assisting quality control across multiple workpieces. Practical handling and lifecycle considerations The pre‑slotted configuration facilitates chip evacuation and can reduce binding during cutting, which in turn lowers the likelihood of premature tool wear. The use of HSS balances initial tool cost with a longer effective service life compared with lower‑grade steels, supporting economical operation over many cycles. For workshops seeking to centralise procurement and maintain consistent tool quality, the product aligns with a pragmatic supply strategy that favours durability and standardisation. Contact Metav Werkzeuge for expert advice on selecting the appropriate TECWERK HSS threading die and to place orders — info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867780NW SKU: 2000867780NW Label: Schneideisen Form B G 1/8 Zollx28 HSS A TECWERK Facts Thread size: G 1/8" x 28 Height: 11 mm Material suitability: steels up to 800 N/mm² Tolerance: A Special features Cutting material: HSS Standard: DIN EN 24231 Form: B Whitworth pipe thread G per DIN ISO 228 Closed, pre‑slotted form Packaging unit: 1 FAQ What thread standard does this die produce? The die produces a parallel Whitworth pipe thread G 1/8" x 28, manufactured to the DIN EN 24231 specification for consistent fit. Is the die suitable for use on medium‑strength steels? Yes, the TECWERK die is made from HSS and rated for machining steels up to approximately 800 N/mm² tensile strength. What does the closed, pre‑slotted form mean in practice? A closed, pre‑slotted form provides rigid cutting edges with slots that assist chip evacuation, improving cutting stability and surface finish when using the die. Which tolerance class does this die follow and why is it important? The die is produced to Tolerance A, offering a standardised fit that helps ensure compatibility with matching pipe fittings and predictable assembly behaviour. How is the tool best held for manual threading operations? Use a suitable die stock or holder sized for Form B dies; the compact 11 mm height makes it compatible with common die holders while maintaining rigidity. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Taking advantage of the DIN 225 specification and solid steel construction ensures repeatable thread cutting with secure die retention and long service life, while the supplied screws and the screw-in handle simplify die changes and reduce setup time; order the TECWERK item directly via Metav Werkzeuge or consult our specialists for application-specific advice. TECWERK Die Holder DIN 225 — Steel, Ø105 mm, H 22 mm A TECWERK die holder DIN 225 engineered for secure clamping of round cutting dies in closed and slotted designs, suitable for workshop and maintenance work Conforms to DIN 225 standard Solid steel construction for durability Includes screws and screw-in handle Compatible with Ø105 mm round dies Consistent results through standard conformity The holder is produced to DIN 225, which guarantees dimensional compatibility with industry-standard round dies and supports predictable assembly and maintenance routines. By matching a standardised interface, the tool simplifies tooling selection and inventory management, reducing the risk of mismatched components. The combination of a defined nominal diameter (Ø105 mm) and a robust construction yields consistent clamping pressure, which in turn lowers the probability of thread defects and rework in series or repair tasks. Heavy-duty design that reduces downtime Constructed from steel with a height of H 22 mm, the holder provides the mechanical stiffness required for routine industrial use. Fastening is achieved via supplied screws and a screw-in handle, enabling positive engagement for both closed and slotted dies; this secure fit diminishes vibration and tool movement during cutting, extending die life and lowering maintenance frequency. The nominal overall length (1000 mm) offers reach and leverage where required, while the compact cross-section supports accessibility in confined workspaces. Faster die changes and straightforward maintenance Fitted components and a practical mounting concept mean the holder permits rapid die exchange, helping to keep machine or bench time productive. The design supports both solid and slotted die types without additional adapters, which streamlines operations in mixed-production environments. For workshops prioritising throughput and repeatability, this die stock offers a pragmatic balance of reliability and handling efficiency; specification choices are especially relevant where repeatable external threads are required on assemblies. For tailored specification advice and reliable supply of the TECWERK die holder DIN 225, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application fit and delivery options Technical data Article number: 2000867888NW Brand: TECWERK Packaging unit: 1 Facts Diameter: Ø105 mm Height: 22 mm Overall length: 1000 mm Special features Material: Steel Standard: DIN 225 Includes screws and screw-in handle For closed and slotted round dies FAQ What standard does the die holder comply with? The holder conforms to DIN 225, ensuring dimensional compatibility with standard round cutting dies designed to that specification. Which die diameter is supported by this holder? The device accepts round dies with a nominal diameter of Ø105 mm, as specified in the product details and suitable for standard external thread dies. Are fastening components included for mounting the dies? Yes, the package includes screws and a screw-in handle for secure mounting of both closed and slotted dies, facilitating quick changeovers. What material is the holder made from and how does that affect performance? Manufactured from steel, the holder provides stiffness and durability that reduce vibration during cutting and contribute to longer service life of both the holder and the dies. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a compact, standards‑compliant solution that combines HSS cutting material, a M10 x 1 metric fine thread and a closed, pre‑slit Form B for reliable, repeatable thread production; order the tool directly via Metav Werkzeuge or request tailored advice from their consultants. TECWERK M10 x 1 Metric Fine Threading Die (Form B) – HSS, 6g The M10 x 1 metric fine threading die (Form B) is a high‑precision die for cutting metric ISO fine threads in workshop and light production environments, designed for steels with tensile strengths up to approximately 800 N/mm². HSS for durable cutting performance Metric fine thread M10 x 1, tolerance 6g Suitable for steels up to approx. 800 N/mm² Closed, pre-slit Form B for clean threads Consistent, to‑spec threads for reliable assembly The M10 x 1 specification with 6g tolerance and conformity to DIN EN 22568 ensures threads are produced to an industry‑recognised standard, reducing variation in fit and assembly. This threading tool delivers repeatable results so that components mate confidently without additional rework. The combination of fine pitch and precise tolerance supports accurate clamping and predictable torque behaviour in assemblies where thread quality directly affects product performance. Long service life through high‑speed steel construction Manufactured from HSS, the die provides a balance of toughness and hardness that sustains cutting edges under typical workshop loads. HSS cutting material offers resistance to abrasive wear and thermal softening compared with standard tool steels, which translates into longer intervals between replacements and fewer interruptions on the production line. The material choice is particularly beneficial when working with medium‑strength steels up to 800 N/mm², where edge integrity and consistent geometry are essential. Closed, pre‑slit Form B design for clean, controllable cuts The closed, pre‑slit Form B geometry guides the workpiece engagement and promotes controlled chip formation, helping to minimise burrs and produce a superior surface finish on the thread flanks. The pre‑slit feature eases chip evacuation relative to fully closed dies while maintaining the centring advantages of a closed form, resulting in reduced hand finishing and faster throughput for repair and small‑series tasks. Compact dimensions that simplify handling and storage With a height of 11 mm, this threading die occupies minimal space in tool kits and die stocks, facilitating orderly storage and quick retrieval. The compact format is practical for workshop environments that favour efficiency and tidy tooling management. Supplied as a single unit, the die is straightforward to integrate into existing workflow processes where space‑saving and rapid changeover are priorities. For TECWERK quality and precise M10 x 1 threading, contact Metav Werkzeuge for technical guidance or a tailored quotation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867763NW Label: Schneideisen Form B metrisch fein MF10x1mm HSS 6g TECWERK Brand: TECWERK Facts Thread: M10 x 1 mm Tolerance: 6g Height: 11 mm Material strength limit: approx. 800 N/mm² Cutting material: HSS Special features Form: B, closed, pre‑slit Standard: DIN EN 22568 Thread type: Metric ISO fine thread (DIN 13 MF) Packaging unit: 1 FAQ What thread does this die cut? The die cuts a M10 x 1 metric fine thread to 6g tolerance in accordance with DIN EN 22568, delivering the dimensional precision expected for metric ISO fine threads. Which materials is the die specified for? The TECWERK die is made from HSS and specified for use on steels with tensile strengths up to approximately 800 N/mm², offering a suitable balance of hardness and toughness for such applications. What advantages does the closed, pre‑slit Form B provide? A closed, pre‑slit Form B offers improved centring and controlled chip behaviour, which helps produce cleaner thread forms and reduces the need for secondary finishing. What are the die dimensions and packaging details? The die has a height of 11 mm and is supplied as a single unit; refer to SKU 2000867763NW for ordering and stock enquiries. Is the die appropriate for workshop and small‑series production? Yes; the die’s adherence to DIN standards, fine tolerance class and HSS construction make it suitable for precise workshop repairs and small‑batch production where consistent thread quality is required. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining robust HSS construction, DIN-compliant accuracy and a closed, pre-slit Form B geometry, this threading die produces repeatable MF12x1.5 mm metric fine threads in steels up to 800 N/mm². Order the tool directly via Metav Werkzeuge or contact our consultants for application-specific advice and delivery from Emmerich. Threading die, Form B — MF12x1.5 mm, HSS, 6g — TECWERK Threading die, Form B — MF12x1.5 mm HSS 6g by TECWERK is a compact cutting tool designed for producing metric fine threads in workshop and light industrial applications HSS construction for high wear resistance Metric fine thread MF12x1.5 ISO Tolerance field 6g for precise fits Suitable for steels up to 800 N/mm² Accurate metric fine threads that meet standards The die is engineered to deliver consistent metric fine threads in accordance with recognised standards such as DIN EN 22568, ensuring compatibility with standard fittings and assembly processes. Thanks to the specified tolerance field 6g, the tool provides tight dimensional control for reliable mating of bolts and nuts, which reduces rework and inspection effort. This clarity of tolerance supports production planning and inventory standardisation in small-series and repair operations. Durable cutting performance for demanding steels Manufactured from high-speed steel (HSS), the tool offers a balance of toughness and wear resistance suitable for repeated use on ferrous materials. The geometry and material selection enable secure thread formation in steels up to 800 N/mm², while the closed, pre-slit design helps control chip flow and improves surface finish compared with open dies. The 10 mm height contributes to stable clamping in holders, translating to consistent cycle times and reduced tool change frequency. Simple integration into workshop workflows The robust construction and ISO-compatible thread form make the die straightforward to incorporate into existing tooling sets and hand-holding fixtures. Its designation for metric ISO fine threads (DIN 13 MF) means it complements standard thread gauges and quality checks. Sourcing through Metav adds the benefit of a European quality filter: consolidated supply, technical documentation and access to knowledgeable advice help workshops scale precision without excessive supplier complexity. For precision fine-thread production with proven HSS reliability, contact Metav Werkzeuge in Emmerich for purchasing and application advice: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 2000867767NW Product: Threading die, Form B, metric fine MF12x1.5 mm, HSS, 6g Manufacturer: TECWERK Packaging unit: 1 UID: 2000867767NW Core measurements Thread: MF12x1.5 mm Pitch: 1.5 mm Height: 10 mm Tolerance: 6g Material strength capability: up to 800 N/mm² Standard: DIN EN 22568 Special features Cutting material: HSS Form: B Closed, pre-slit design Metric ISO fine thread (DIN 13 MF) Suitability: steel machining FAQ What thread does this die cut? The tool cuts a metric fine thread MF12x1.5 mm; the TECWERK threading die is specified to produce the MF12x1.5 form. Is the die suitable for hardened steels? The die is specified for steels up to approximately 800 N/mm²; harder or specially hardened materials require alternative tool grades. What standard and tolerance does the tool follow? The die is produced to DIN EN 22568 and delivers threads to the 6g tolerance field for standardised fits. How does the closed, pre-slit design benefit production? The closed, pre-slit geometry improves chip control and surface finish during cutting, reducing the risk of thread deformation and easing subsequent inspection. Can this die be used in standard die holders? Yes, the form and dimensions align with common holders for hand or machine threading; verify clamping height and holder compatibility before use. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a precision-engineered HSS die that meets DIN EN 24231 and produces Whitworth pipe threads with Tolerance A; the robust, closed Form B design with 10 mm height ensures consistent engagement and long service life. Order directly via Metav Werkzeuge or contact their consultants for specification support. Die, Form B G 1/4" x 19, HSS, Tolerance A — TECWERK A Die, Form B G 1/4" x 19 HSS A (TECWERK) for reliable production of Whitworth pipe threads in general engineering and workshop applications. HSS material for high wear resistance Whitworth pipe thread G 1/4" x19 Closed, pre-slit Form B design Tolerance field A for steels up to 800 N/mm² Consistent, standard-compliant thread generation The tool conforms to DIN EN 24231 and cuts Whitworth pipe threads to DIN ISO 228 specifications, ensuring compatibility with standard fittings and components. Being manufactured in HSS provides a balance between toughness and hardness that supports repeatable thread geometry and reduces the risk of off‑tolerance parts. The specified Tolerance A indicates a close fit for sealing applications — a clear benefit where consistent thread fit is critical in assembly and maintenance work. Robust construction with efficient chip control A closed, pre-slit Form B geometry gives controlled chip formation and stable cutting engagement, which lowers the incidence of thread distortion and improves surface finish. The 10 mm height provides ample tooth engagement for reliable starting and consistent thread profile under intermittent or continuous operations. The HSS cutting material delivers wear resistance suited for workshop environments and reduces unexpected downtime owing to premature tool wear. Engineered for workshop workflows and traceable compliance Designed for use on conventional die stocks or dedicated holders, this die integrates easily into existing machining and repair processes while maintaining thread quality across batches. The specification for steels up to 800 N/mm² tensile strength defines a clear application range, aiding procurement and process planning. Supplied as a single unit and available through established distribution channels, the component supports streamlined inventory management and quality assurance procedures. For specific application advice on TECWERK HSS dies or to arrange prompt delivery from Metav Werkzeuge in Emmerich, contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867781NW Product name: Die Form B G 1/4" x 19 HSS A Brand: TECWERK Packaging unit: 1 Facts Height: 10 mm Thread: G 1/4" x 19 (Whitworth pipe thread) Tensile strength suitability: up to approx. 800 N/mm² Special features Material: HSS Standard: DIN EN 24231; DIN ISO 228 Tolerance: Tolerance field A Design: Closed, pre-slit Form B FAQ What thread type does this die produce? The die produces a Whitworth pipe thread G 1/4" x 19 in accordance with DIN ISO 228, as specified for the Die Form B G 1/4" x 19 HSS A (TECWERK). Which materials is the die suited for? The tool is specified for use with steels up to approximately 800 N/mm² tensile strength; this guidance applies to the TECWERK HSS die. What standards and tolerance class apply? The component meets DIN EN 24231 and is manufactured to Tolerance A, ensuring a precise fit for standard pipe fittings. What is the advantage of a closed, pre-slit Form B design? A closed, pre-slit Form B improves chip control and stabilises the cutting action, which helps to preserve thread profile and surface quality during cutting. What is the engagement height of the die? The die has a height of 10 mm, providing sufficient tooth engagement for consistent thread formation. How is the product supplied? The item is supplied as a single unit (packaging unit: 1) under SKU 2000867781NW for straightforward stocking and replacement. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS construction and DIN-compliant geometry for consistent, long‑term thread quality; the closed, pre‑slotted Form B ensures reliable chip control and ease of alignment. Order the die directly via Metav Werkzeuge or ask the consultants for application advice. TECWERK MF12x1 mm HSS Threading Die — Form B, 6g tolerance The TECWERK MF12x1 mm HSS threading die is a compact round die designed for cutting metric fine threads in medium‑strength steels, ideal for workshop and production environments. HSS cutting material Metric fine thread MF12x1 mm Tolerance class 6g Closed, pre-slotted Form B Consistent, DIN‑based accuracy for reliable assemblies Manufactured to DIN EN 22568 and matching DIN 13 MF specifications, this round die delivers reproducible thread geometry that supports interchangeability across components. The 6g tolerance class defines a tight but practicable allowance for male threads, reducing play in assemblies and enabling predictable fits when paired with standard nuts and bolts. For procurement and process planning, the clear standard compliance simplifies inspection and acceptance criteria. Robust cutting performance for medium‑strength steels The tool is made from high‑speed steel (HSS), providing a balance of toughness and wear resistance for machining materials up to approximately 800 N/mm² tensile strength. The closed, pre‑slotted Form B aids chip evacuation while maintaining flank support during cutting, which reduces the risk of tool chatter and improves surface finish. A controlled cutting geometry therefore extends tool life and minimises rework in repetitive production tasks. Practical handling that supports workshop efficiency With a compact height of 10 mm and single‑unit supply, the die fits common die stocks and holders for manual or bench use, making it suitable for maintenance work and small‑series production alike. The solid HSS construction means straightforward resharpening or dressing by qualified tool service if required, while the standard metric pitch eliminates conversion errors. For tailored application recommendations or compatibility queries, technical guidance is available to support process integration. Contact Metav Werkzeuge for application support and fast supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert advice and order processing Technical data Article number: 2000867765NW Label: Schneideisen Form B metrisch fein MF12x1mm HSS 6g TECWERK Manufacturer brand: TECWERK Facts Thread: MF12x1 mm Tolerance: 6g Material: HSS Standard: DIN EN 22568; DIN 13 MF For steels up to approx. 800 N/mm² Height: 10 mm Special features Form: B Closed, pre-slotted design Cutting material: HSS Packaging unit: 1 FAQ What materials can this die machine reliably? The TECWERK MF12x1 mm die is intended for machining steels up to approximately 800 N/mm²; its HSS construction gives the required toughness and wear resistance for those applications. What does the 6g tolerance indicate for assembled parts? Tolerance class 6g specifies the dimensional clearance for external threads; using this die produces standardised fits that are compatible with matching internal threads made to DIN 13 MF. Is the die suitable for use in a hand die stock? Yes, the compact 10 mm height and standard round‑die format make the tool compatible with common hand die stocks and bench holders for repair and small‑series work. Can the die be resharpened or refurbished? Being made from HSS, the die can be refurbished by qualified tool service providers; resharpening restores cutting edges and extends service life when wear becomes evident. Which standards does the threading geometry conform to? The threading geometry conforms to DIN EN 22568 and DIN 13 MF, ensuring interchangeability and predictable thread form across components. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of durable HSS construction and DIN‑certified manufacture to produce precise metric fine threads with minimal rework; order directly via Metav Werkzeuge or consult our specialists for technical advice. TECWERK Threading Die MF14x1.5, Form B — HSS, 6g A TECWERK MF14x1.5 threading die for accurate metric fine threads, designed for workshop and industrial applications where repeatable, standard-compliant results are required. HSS construction for long tool life DIN EN 22568 standard compliance Closed, pre-slotted form B for stable cutting Metric fine thread MF14x1.5, tolerance 6g Consistent fine-thread accuracy for reliable assemblies The MF14x1.5 thread geometry combined with the 6g tolerance offers repeatable fit and function for mating components, reducing adjustment and rework during assembly. This die cuts metric fine threads to the ISO/DIN specifications, so mating fasteners and tapped holes achieve predictable engagement and preload. For production runs where thread interchangeability matters, the result is fewer rejects and a smoother assembly process. Robust HSS material for prolonged service life Constructed from HSS and manufactured to DIN EN 22568, the tool delivers a balance of toughness and wear resistance suited to workshop conditions. The high-speed steel cutting material resists thermal softening and sustains edge integrity when used on appropriate materials, making it suitable for working with steels up to approx. 800 N/mm² tensile strength. The result is extended tool life and steadier cutting performance across repetitive operations. Stable cutting geometry and practical handling in everyday workflows The closed, pre-slotted form improves chip control and stabilises cutting forces, which helps maintain thread quality even where manual alignment varies. With a compact 10 mm height and the established form B geometry, the die is compatible with standard die holders and hand-tool workflows common in maintenance and small-batch production. The configuration simplifies setup and supports efficient throughput without sacrificing precision. For dependable metric fine-thread production choose the TECWERK HSS threading die and contact Metav Werkzeuge for purchasing and expert guidance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000867768NW Name: Threading die, form B, metric fine, MF14x1.5 mm, HSS, tolerance 6g Manufacturer: TECWERK Packaging unit: 1 Facts Height: 10 mm Tolerance: 6g Standard: DIN EN 22568 Application: steels up to approx. 800 N/mm² tensile strength Special features Form: B Closed, pre-slotted form Cutting material: HSS Metric ISO fine thread DIN 13 MF FAQ What thread form and tolerance does this die produce? The TECWERK threading die produces a metric fine thread MF14x1.5 with a 6g tolerance suitable for standardised assemblies. Which materials is the die suitable for? This HSS die is intended for machining steels up to approx. 800 N/mm² tensile strength, as specified for the TECWERK MF14x1.5 tool. Is the die compliant with recognised standards? Yes, the die is manufactured in accordance with DIN EN 22568 and conforms to metric ISO fine thread dimensions (DIN 13 MF). How does the closed, pre-slotted form benefit workshop use? The closed, pre-slotted form improves chip evacuation and stabilises cutting forces, which helps maintain consistent thread quality during repeated manual or machine-assisted operations. What is the physical height of the die and how does that affect handling? The die has a height of 10 mm, giving a compact profile that fits standard die holders and is convenient for confined workspaces. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from the combination of durable HSS‑E cutting material and precise M14×2 metric accuracy for consistent, workshop-grade external threads; the compact 14 mm height and closed Form B construction support controlled chip formation and repeatable results. Order the die directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Threading Die M14×2, HSS‑E, 6g, Form B The TECWERK Threading Die M14×2 is a closed, pre‑slotted Form B die for cutting metric ISO external threads in difficult‑to‑machine alloys, stainless and heat‑resistant steels. HSS‑Co material for high wear resistance Metric ISO thread M14×2, tolerance 6g Closed, pre‑slotted Form B for reliable cutting Suitable for stainless and high‑strength steels Accurate external threads even in challenging materials Designed for precision external threading, this round die delivers consistent metric ISO thread geometry, enabling reliable assembly fits in demanding applications. The cobalt‑alloyed high‑speed steel construction gives the tool the hardness and hot‑strength required when working with stainless, heat‑ and acid‑resistant steels and special alloys. For production environments where repeatability matters, the combination of hardened cutting material and standardised geometry reduces rework and ensures parts meet assembly tolerances. Durable cutting performance and industrial standards The cutting material conforms to recognised specifications, offering improved wear resistance and temperature stability compared with standard high‑speed steels. Compliance with DIN EN 22568 and thread form according to DIN 13 provides a verifiable basis for quality assurance in serial production. Using a cobalt‑alloyed grade contributes to longer tool life under elevated cutting loads, which in turn lowers tool change frequency and supports efficient workshop throughput. Controlled thread fit and chip management for easier machining The Form B design in a closed, pre‑slotted layout ensures stable cutting edges and predictable chip formation. The specified 6g tolerance corresponds to the standard external thread tolerance grade, delivering a reliable fit with corresponding internal threads and reducing the need for manual adjustment. Controlled chip evacuation and the die’s geometry help avoid damage to the workpiece finish, particularly when machining alloys with high tensile strength up to 1200 N/mm². Practical advantages for the professional workshop With a compact height of 14 mm and robust construction, the tool suits repeated use in repair shops and production settings where space and handling convenience matter. The die’s build supports consistent thread quality over multiple operations, and its adherence to industry standards simplifies integration into existing quality protocols. Where machining performance and predictable results are priorities, this tooling choice contributes directly to process reliability. For reliable threading in high‑strength alloys, request the TECWERK M14×2 die via Metav Werkzeuge for expert advice and swift supply — contact info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: 2000867847NW Product name: Schneideisen Form B M14x2mm HSS‑E 6g TECWERK Manufacturer: TECWERK Packing unit: 1 Facts Thread: M14×2 mm (metric ISO) Tolerance: 6g Height: 14 mm Strength capability: up to 1200 N/mm² Standards: DIN EN 22568; DIN 13 Special features Material: HSS‑E (cobalt‑alloyed high‑speed steel) Form: Closed, pre‑slotted Form B Application: for difficult‑to‑machine materials and special alloys Suitable for: stainless, heat‑ and acid‑resistant steels; high‑strength steel up to 1200 N/mm² FAQ Can this die cut threads in stainless steel and heat‑resistant alloys? Yes. The TECWERK Threading Die M14×2 in HSS‑E is specified for stainless, heat‑ and acid‑resistant steels and special alloys, and is rated for steels up to 1200 N/mm² tensile strength. What does the 6g tolerance indicate for the external thread? The 6g tolerance denotes the standard external thread tolerance class for metric ISO threads under DIN 13, providing a typical clearance fit when paired with the matching internal tolerance class. Why choose a closed, pre‑slotted Form B die? A closed, pre‑slotted Form B offers steady cutting engagement and improved chip control, which leads to cleaner thread flanks and greater dimensional consistency across batches. Is the die compliant with recognised standards? The die’s geometry and material reference DIN EN 22568 and DIN 13, giving a verifiable framework for quality checks and compatibility with standardised thread specifications. What material is the die made from and why does it matter? Constructed from HSS‑E (cobalt‑alloyed high‑speed steel), the die provides enhanced wear resistance and thermal stability compared with ordinary high‑speed steel, extending service life in demanding cutting conditions. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the die's HSS construction and Tolerance A accuracy for consistent, repeatable pipe-thread production; the closed, pre-slotted Form B design supports secure chip control and clean re‑threading operations. Order directly via Metav Werkzeuge or consult the technical team for specification matching. TECWERK HSS die, Form B — G 1/2 in × 14 tpi, Tolerance A TECWERK HSS die Form B G 1/2 in × 14 tpi is a high‑speed steel cutting die for producing and restoring parallel pipe threads (G) in medium‑strength steels and general workshop applications. *Form B closed, pre-slotted construction *DIN EN 24231 compliant HSS construction *G 1/2 in × 14 tpi, parallel pipe thread (G) *Tolerance field A for consistent thread accuracy Reliable thread accuracy for repeatable assemblies The TECWERK HSS die Form B G 1/2 in × 14 tpi is designed to deliver consistent thread geometry thanks to compliance with DIN EN 24231 and the specified Tolerance A. For production runs or maintenance tasks where interchangeability matters, this tolerance class ensures mating parts meet their intended fit without trial‑and‑error adjustments. The nominal thread profile follows the Whitworth pipe thread specification (G), making the die suitable where parallel pipe threads are required for fittings and connectors. Durable cutting performance and easy handling Manufactured from high‑speed steel (HSS), the tool offers a balance of toughness and wear resistance for workshop cutting and repair jobs. The tool height of 14 mm and the closed, pre‑slotted Form B design provide stable cutting edges with improved chip control, reducing the risk of clogging and helping to maintain surface finish. The HSS material permits occasional resharpening in a toolroom setting, extending service life compared with softer tool steels. Practical compatibility across common workshop materials This die is specified for steels up to approximately 800 N/mm², covering a broad range of construction and engineering steels encountered in maintenance and fabrication. The G-thread format follows DIN ISO 228 and is widely used in plumbing and mechanical systems where a parallel pipe thread is required. The closed, pre‑slotted design simplifies re‑threading of worn parts and is particularly effective when restoring threads on fittings prior to assembly. Designed for efficient workshop workflows Using a purpose‑made die such as this reduces rework and improves throughput: the combination of standard conformity, robust HSS cutting material and a Form B construction results in reliable cuts and predictable fits. For technicians and purchasing managers looking to streamline tooling inventories, the die represents a practical component that supports maintenance schedules and production continuity without complex setup or special tooling. For ordering or technical consultation regarding the TECWERK HSS Form B die (SKU 2000867783NW), please contact Metav Werkzeuge for application advice and delivery options at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867783NW Label: Schneideisen Form B G 1/2 Zollx14 HSS A TECWERK Packaging unit: 1 Dimensions & tolerance Height: 14 mm Thread: G 1/2 in × 14 tpi Tolerance field: A Suitable for steels up to approx. 800 N/mm² Features & standards Cutting material: HSS Standard: DIN EN 24231 Form: B — closed, pre‑slotted Thread type: Whitworth pipe thread G (DIN ISO 228) Manufacturer: TECWERK FAQ What materials is this die suitable for? The TECWERK HSS die Form B is specified for use on steels up to approximately 800 N/mm², making it suitable for common construction and engineering steels encountered in workshops. Which thread standard and tolerance does the die follow? The tool conforms to DIN EN 24231 and produces Whitworth pipe threads G to DIN ISO 228 with Tolerance A for consistent mating fits. Is the die suitable for producing parallel pipe threads used in plumbing? Yes — the G 1/2 in × 14 tpi format yields a parallel pipe thread widely used in fittings and connectors; sealing is typically achieved with appropriate washers or seals as required by the application. How does the closed, pre‑slotted Form B design affect performance? The closed, pre‑slotted Form B construction improves chip control and stabilises cutting edges, which helps to deliver cleaner threads and simplifies re‑threading of worn components. Can the HSS cutting edges be refurbished? The HSS material allows for professional resharpening in a toolroom environment; the feasibility depends on wear patterns and available sharpening equipment. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Reliable metric thread production is achieved through the combination of HSS cutting material and Form B geometry, delivering repeatable M14×2mm threads with a 6g tolerance; this ensures consistent fits and low rework rates. Order the die directly via Metav Werkzeuge or consult their technical advisors for specification support and rapid delivery. Round die, Form B M14×2mm HSS (TECWERK) – Metric ISO thread, 6g tolerance Round die, Form B M14×2mm HSS is a precision tool for cutting ISO metric threads in medium-strength steels; designed for workshop and light industrial applications where reproducibility and standard compliance are required. HSS cutting material, durable and wear-resistant Metric ISO thread M14x2, DIN 13 compliant Tolerance field 6g for consistent thread fit Suitable for steels up to approx. 800 N/mm² Consistent threads that reduce rework and assembly time This round die, presented in Form B, is engineered to produce stable, standard-compliant threads. The use of HSS as the cutting material combined with the DIN EN 22568 specification results in a balance between toughness and edge retention, meaning the tool maintains form over repeated cycles. With a defined tolerance field 6g, the thread profile meets common engineering tolerances for clearance and interference fits, which reduces the need for subsequent correction or replacement operations. In production environments, this predictability directly supports higher first-pass yield and fewer assembly delays. Robust design for longer service life and reliable chip control The die’s closed, pre-slotted Form B construction and height 14mm contribute to mechanical stability during cutting and improved chip evacuation. The pre-slotted geometry allows controlled chip breaking and reduced risk of clogging, which extends the effective life of the cutting edges and lowers maintenance frequency. Combining these design elements with HSS ensures that the tool resists edge deformation when applied to materials within its specified strength range, translating into fewer tool changes and steadier operational costs over time. Straightforward workshop integration and standards compliance Compatibility with the metric ISO thread DIN 13 system simplifies inventory management and replacement planning in mixed-tool workshops. The M14×2mm size is a common standard that fits established tolerances and mating parts, enabling seamless integration into existing processes. Sourcing through a central supplier such as Metav Werkzeuge offers a consistent quality filter for the European market and simplifies procurement logistics, helping maintenance and procurement teams consolidate suppliers without sacrificing precision. Suitable applications and recommended workpiece materials The tool is specified for thread cutting in steels up to approx. 800 N/mm² tensile strength; this makes it suitable for common structural and component steels encountered in mechanical engineering and maintenance work. For materials outside this range, or for specialised alloys, tool selection should be reviewed to match hardness, ductility and thermal properties. The die’s standard-compliant profile and HSS cutting material provide a reliable baseline for shop-floor tasks where standard metric threads are required and process stability is a priority. Contact Metav Werkzeuge for tailored advice on integrating TECWERK HSS dies into production and for fast dispatch from Emmerich — eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 2000867744NW Product designation: Round die Form B M14x2mm HSS (TECWERK) Manufacturer: TECWERK Facts Thread size: M14×2mm Tolerance: 6g Height: 14 mm Suitable material strength: up to approx. 800 N/mm² Packaging unit: 1 Special features Cutting material: HSS Standard: DIN EN 22568 Form: B, closed and pre-slotted Metric ISO thread according to DIN 13 FAQ What materials is this die suitable for? The TECWERK round die, Form B M14×2mm HSS is specified for use in steels up to approx. 800 N/mm² tensile strength; performance in other materials will depend on hardness and alloy composition. Which standards does the die comply with? The die is manufactured to DIN EN 22568 standards and produces metric ISO threads in accordance with DIN 13, ensuring compatibility with standardised mating components. How does Form B affect thread cutting compared with other forms? Form B (closed, pre-slotted) provides improved chip control and greater edge support compared with open forms; this typically results in cleaner threads and longer tool life for the same application. Is this die suitable for production use or only for maintenance? With HSS construction and standard tolerance 6g, the die is suitable for both maintenance and small-batch production where reproducible metric threads are required; larger-scale production should consider dedicated threading machinery where appropriate. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from a robust, high-speed steel construction combined with conformity to DIN standards and a left-hand cutting geometry for dependable reverse-thread production; order the tool directly via Metav Werkzeuge or consult our specialists for application guidance. TECWERK Thread Cutting Die Type B · M14×2 mm · HSS · 6g · left-hand A thread cutting die Type B M14×2 mm HSS 6g left-hand that delivers precise metric ISO external threads for medium-strength steels and specialised reverse-thread applications. HSS for extended cutting life Left-hand cutting for reverse threads Metric ISO thread DIN 13, tolerance 6g Consistent thread quality through hardened HSS and standards compliance The combination of HSS cutting material and conformity with DIN EN 22568 ensures a durable cutting edge and stable performance when producing external threads. For workshop and industrial use, this construction means fewer tool changes and predictable wear characteristics, which helps maintain throughput. The die is suitable for working with steels up to approximately 800 N/mm², so the component strength is matched by the tool capability, and the M14×2 mm specification refers to a standard metric external thread size and pitch that is widely compatible in engineering assemblies. Purpose-built left-hand geometry and smart slotting for reliable cuts Left-hand cutting geometry is essential for applications where reverse or counter-threaded connections are required; the die’s orientation prevents thread damage during counter-rotation in final assemblies. The closed, pre-slotted Form B design provides controlled chip formation and evacuation while maintaining the die’s circular form for accurate engagement. These features reduce the risk of cross-threading and allow for steady, repeatable cuts on bar stock or shafts when paired with an appropriate die holder and lubrication. Interchangeability, tolerance assurance and practical handling advice The tolerance field 6g indicates a standard external thread fit that balances manufacturability with mechanical interchangeability under metric ISO norms (DIN 13). A 14 mm die height and the Form B configuration make the component compatible with standard die holders for conventional machining workflows. For best results in production settings, use suitable cutting fluid, ensure axial alignment in the die holder, and consider light finishing passes when high-precision mating threads are required. The product’s design supports routine workshop maintenance and predictable replacement scheduling. For dependable left-hand metric threading choose the TECWERK M14×2 mm Type B die—order or request application advice from Metav Werkzeuge by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for specification support and fast delivery Technical data Article number: 2000867448NW Manufacturer: TECWERK Facts Thread size: M14×2 mm Height: 14 mm Tolerance: 6g Material strength up to: approx. 800 N/mm² Special features Cutting material: HSS Left-hand cutting Metric ISO thread DIN 13 Closed, pre-slotted Form B Standard: DIN EN 22568 FAQ What materials can this die machine? The TECWERK thread cutting die Type B M14×2 mm HSS 6g left-hand is specified for use on steels up to approximately 800 N/mm² tensile strength and is suitable for standard workshop applications on medium-strength steel. Why choose a left-hand cutting die instead of a right-hand one? Left-hand cutting geometry is necessary where the final assembly requires reverse or counter-threaded connections; the left-hand design of the TECWERK die prevents unintended thread damage during counter-rotation. What does the tolerance 6g mean for the finished thread? Tolerance 6g denotes a standard external thread clearance under metric ISO norms (DIN 13), offering a reliable fit for general engineering components while simplifying interchangeability. How does the pre-slotted, closed Form B benefit production? The closed, pre-slotted Form B offers controlled chip formation and improved engagement consistency, which reduces the likelihood of jamming and supports repeatable thread quality in series production. Can the die be used in standard die holders and how should it be lubricated? The die’s 14 mm height and Form B shape are compatible with common die holders; for longer tool life and better surface finish, apply appropriate cutting fluid and maintain correct alignment during operation. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combining durable HSS construction with DIN EN 22568 conformity and precise MF18×1.5 fine-thread geometry delivers dependable, repeatable thread cutting and reduced rework in production. Order the (Metric round die MF18×1.5mm HSS 6g by TECWERK) directly via (Metav Werkzeuge) or ask our consultants if needed. TECWERK Metric round die MF18×1.5mm, HSS, 6g The TECWERK Metric round die MF18×1.5mm is a Form B cutting die designed to produce ISO fine threads in steel components for workshop and industrial applications. HSS material, DIN EN 22568 certified ISO fine thread MF18×1.5 (tolerance 6g) Form B closed, pre-slotted design For steels up to approx. 800 N/mm² Consistent fine-thread performance for reliable assembly Built to the ISO fine-thread specification, this round die guarantees a repeatable thread profile for assemblies where fit and tolerance matter. The combination of MF18×1.5 geometry and 6g tolerance, produced in accordance with DIN EN 22568, reduces variance between batches and lowers the risk of rejection during quality control. Such dimensional consistency shortens inspection cycles and supports leaner production flows, making the tool suitable for both maintenance tasks and small-series manufacturing. Robust HSS construction for extended lifetime in workshops Manufactured from high-speed steel, the cutting edges maintain sharpness under frequent use and resist deformation at elevated cutting temperatures. The HSS material maintains cutting performance when working with medium-strength steels and supports operations on materials rated at steels up to 800 N/mm², offering a balance between toughness and wear resistance. This durability translates into fewer tool changes, less downtime and a predictable service interval that aids planning in busy workshop environments. Form B closed design for cleaner cuts and improved chip control The Form B closed, pre-slotted configuration focuses on controlled chip formation and reduced risk of jamming during thread cutting. A 14 mm height provides stable engagement and uniform thread depth while the pre-slotted finish eases chip evacuation compared with fully closed dies in heavy material removal situations. The result is cleaner external threads with minimal hand finishing required, which supports faster assembly and a more professional surface finish on mating components. For procurement or technical guidance on the TECWERK MF18×1.5 die, contact Metav Werkzeuge for personalised advice and supply options via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867770NW Product name: Metric round die MF18×1.5mm HSS 6g Manufacturer: TECWERK Packaging unit: 1 Facts Thread: MF18×1.5 Tolerance: 6g Form: B Height: 14 mm Suitable for steels up to approx. 800 N/mm² Special features Cutting material: HSS Standard: DIN EN 22568 Closed, pre-slotted design For ISO fine threads (metric) FAQ What thread size and pitch does this die produce? The die cuts an ISO fine thread of MF18×1.5, compatible with components specified for that metric fine-pitch format. Which materials can be machined with this tool? This TECWERK round die is designed for use primarily on steels and is rated for work on materials up to approximately 800 N/mm² tensile strength. How does the Form B design affect performance? The Form B closed, pre-slotted design improves chip control and yields cleaner external threads, reducing the need for subsequent hand rework. Is the die compliant with recognised standards? Yes, the die is manufactured to DIN EN 22568, ensuring consistent geometry and adherence to industry tolerances such as 6g. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Reliable clamping to the DIN 225 specification and a zinc die-cast body combine for consistent manual thread cutting; the screw-in handle and retaining screws enable quick changeovers and secure seating of dies. Order the TECWERK die holder directly via Metav Werkzeuge or consult our specialists for application guidance. TECWERK Die holder DIN 225 – 16 mm, zinc die-cast with screw-in handle The Die holder DIN 225 secures closed and slotted round dies for manual thread cutting in workshop and maintenance settings. Die holder to DIN 225 standard Accepts closed and slotted dies Screw-in handle with retaining screws Zinc die-cast construction, 160 mm length Secure clamping for accurate manual threading The holder is built to deliver precision and repeatability when cutting threads by hand. Conforming to DIN 225 means the clamping geometry matches standard round dies, allowing safe seating of both closed and slotted dies. The supplied retaining screws lock the die in place to prevent lateral movement during cutting, which reduces the risk of thread deformation and rework. With an integrated screw-in handle, set-up is straightforward and tool changes are faster, improving throughput for repetitive threading tasks. Durable construction reduces downtime Manufactured from zinc die-cast, the component balances rigidity with resistance to routine workshop wear. This material choice supports robust clamping over many cycles and simplifies maintenance compared with more complex assemblies. The straightforward design minimises service requirements and accelerates inspection routines, which is particularly beneficial in busy production benches and service vans where dependable tooling reduces stoppages and contributes to predictable process planning. Clear specifications for straightforward tool integration Key dimensions are stated for seamless integration into existing tooling kits: 160 mm overall length, 5 mm height, and compatibility with 16 mm dies as indicated. The conformity to DIN 225 simplifies procurement and ensures compatibility with standard round dies used across industry. For applications that require consistent manual thread production—maintenance, prototyping, or small-batch fabrication—the clear specification profile supports fast selection and reduces the need for trial parts, helping to keep workflow predictable and efficient. For specification support or to secure the TECWERK die holder for workshop use, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000867870NW Product: Die holder DIN 225 (TECWERK) Packaging unit: 1 Facts Overall length: 160 mm Height: 5 mm Die diameter: 16 mm Standard: DIN 225 Special features Material: zinc die-cast Includes screws and screw-in handle Accepts closed and slotted dies FAQ Which dies are compatible with this holder? The TECWERK die holder DIN 225 accepts standard closed and slotted round dies up to 16 mm diameter; reference SKU 2000867870NW is for this specific configuration. Is the holder suitable for regular workshop use? Yes, the zinc die-cast construction of the die holder is designed for everyday manual threading tasks in workshops and maintenance environments, offering reliable clamping and low upkeep. How is the handle mounted and secured? The handle is screw-in type and the set includes retaining screws to fix the die and handle securely, allowing safe manual operation. What are the principal dimensions to consider? Main dimensions are 160 mm overall length and 5 mm height, with compatibility for 16 mm dies, meeting DIN 225 specifications. Does this product meet an industrial standard? The die holder is manufactured to DIN 225, ensuring interchangeability with standard round dies and simplifying tooling selection. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of precise, repeatable external threading with a high-speed steel tool that meets DIN standards; the combination of HSS construction and a Form B closed, pre-slotted design ensures reliable chip control and consistent thread form for steels up to ≈800 N/mm². Order directly via Metav Werkzeuge or consult our specialists for application guidance. TECWERK Threading Die MF24x1.5 — Form B, HSS, tolerance 6g The TECWERK Threading Die MF24x1.5 is a compact round die for producing metric fine external threads to DIN 13 MF, designed for workshop and industrial use on medium-strength steels. High-speed steel cutting material HSS Metric fine thread MF24x1.5 specification Closed, pre-slotted Form B for chip control Tolerance field 6g for standardised fit Reliable thread quality for demanding assemblies The tool is manufactured to DIN EN 22568 and delivers a consistent metric fine thread profile, which benefits assembly reliability and interchangeability. Using a tool with a defined 6g tolerance reduces rework by ensuring mating parts fit predictably. The HSS cutting material retains hardness under heat, which supports repeatable production runs when working with steels of up to ≈800 N/mm² tensile strength. These features combine to lower scrap rates and improve process predictability in maintenance, repair and small-batch production environments. Efficient machining thanks to closed, pre-slotted design A closed, pre-slotted Form B die gives controlled chip evacuation and a stable cutting geometry. The pre-slotted construction reduces clogging and the need for frequent cleaning, which shortens cycle times and minimises operator intervention. The modest profile height of 16 mm makes the die simple to mount in standard die stocks or holders without compromising rigidity, enabling clean starts and smooth thread lead-in — especially useful for repeated external threading tasks. Clear specifications that simplify tool selection Compliance with DIN 13 MF and the reference DIN EN 22568 standard allows straightforward integration into existing quality systems and tool lists. The designation MF24x1.5 identifies the thread diameter and pitch directly, so planners and buyers can match fasteners and gauges without additional conversion. For operations aiming to consolidate suppliers, choosing a standardised die in HSS material reduces the variety of cutting grades required while maintaining versatility across typical steel grades. Low-maintenance performance and predictable life cycle Built from HSS, the die balances toughness and wear resistance for stable cutting behaviour on unalloyed and alloyed steels within its rated strength range. Routine maintenance is limited to inspection for wear and occasional reconditioning where appropriate, keeping downtime low. The closed form and standard tolerance also facilitate quality checks with gauges and thread measuring tools, supporting consistent inspection protocols and traceable results. For workshop-grade external metric fine threads, choose TECWERK components and contact Metav Werkzeuge for tailored advice or to place an order via eMail info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000867773NW Brand: TECWERK UID: 2000867773NW Data Thread: MF24x1.5 Tolerance: 6g Height: 16 mm Rated material strength: up to ≈800 N/mm² Standard: DIN EN 22568 Special features Cutting material: HSS Form: B (closed, pre-slotted) Metric ISO fine thread DIN 13 MF Designed for external threading FAQ What thread does this die produce? The die produces a metric fine external thread to the MF24x1.5 specification, matching DIN 13 MF requirements. Which materials is the die suited for? This TECWERK Threading Die MF24x1.5 is suitable for machining steels with tensile strength up to approximately 800 N/mm², as specified in the technical data. What does the tolerance 6g mean for assembly? A 6g tolerance denotes the standard external thread fit, providing predictable mating with internal threads manufactured to the corresponding tolerance class for secure assemblies. How does the Form B construction affect machining? The Form B closed and pre-slotted design improves chip control and stabilises cutting geometry, which helps maintain thread quality and reduces cleaning interruptions. Is the material of the die suitable for reconditioning? Made from HSS, the die offers a balance of toughness and hardness that supports standard reconditioning and sharpening practices to extend usable life. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust HSS construction combined with DIN-compliant accuracy and the stability of a closed, pre-slotted Form B design for reliable left-hand metric threading. Order the die directly via Metav Werkzeuge or consult our specialists for application-specific guidance. TECWERK M18x2.5 Left-Hand Threading Die (Form B) HSS 6g A TECWERK M18x2.5 Form B threading die designed to cut left-hand metric ISO threads for demanding steel applications. High-speed steel (HSS) cutting material Metric ISO M18 x 2.5, tolerance 6g Left-hand cutting for LH threads Closed pre-slotted Form B, 18 mm height Accurate metric threads for production and maintenance Manufactured to meet DIN EN 22568, this threading tool delivers consistent M18x2.5 threads with a 6g tolerance field, making it suitable where repeatable fit and interchangeability are required. The HSS cutting material provides a balance of hardness and toughness for machining operations in steel, reducing the need for frequent rework and improving throughput. By specifying a die that conforms to recognised standards, machinists and workshop planners benefit from predictable assembly performance and fewer rejects. Stable cutting geometry with controlled chip flow The closed, pre-slotted Form B configuration offers a full thread profile while the pre-slotted cuts assist chip evacuation during left-hand cutting. At 18 mm height the die maintains secure engagement in standard holders, supporting steady axial guidance and reduced chatter. This combination eases set-up and shortens cycle times in repetitive tasks, translating into measurable efficiency gains on production runs and repair jobs. Suited to common steel grades and workshop workflows Intended for use on steels up to approximately 800 N/mm², the tool covers a broad range of maintenance and fabrication needs without over-specification. The left-hand cutting geometry is ideal for reverse-thread applications or where conventional right-hand tools are unsuitable. The metric thread form to DIN 13 ensures compatibility with existing fasteners and components, simplifying inventory and reducing the number of special parts required in the workplace. Dependable standard compliance for consistent results The solid construction and conformity to industry norms make this die a dependable choice for both industrial and craft environments. The HSS material and standard-compliant geometry deliver predictable wear characteristics and straightforward replacement planning. For shops aiming to democratise precision—balancing cost, availability and quality—this threading die provides a pragmatic solution aligned with professional expectations. For hands-on advice or to secure a supply of TECWERK left-hand threading dies, contact Metav Werkzeuge for tailored procurement support at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867450NW Designation: M18 x 2.5 left-hand threading die, Form B Facts Thread size: M18 x 2.5 Height: 18 mm Tolerance field: 6g Material strength capability: up to ca. 800 N/mm² Special features Material: HSS Standard: DIN EN 22568 Form: B Cutting direction: left-hand cutting Design: closed, pre-slotted Thread standard: metric ISO to DIN 13 FAQ What thread does this die produce? The TECWERK M18x2.5 Form B threading die cuts a metric ISO M18 x 2.5 left-hand thread (SKU 2000867450NW), suitable for components specified to this pitch and diameter. Which materials is the die suitable for? This HSS die is intended for machining steels up to approximately 800 N/mm²; it is optimised for common workshop steels where a robust cutting edge is required. What does the closed, pre-slotted Form B mean in practice? A closed, pre-slotted Form B die maintains the complete thread profile for accurate fit while the slots provide defined chip paths, improving chip control during left-hand threading. What tolerance can be expected from this tool? Threads produced with this die conform to the 6g tolerance field, offering a reliable fit for standard metric fasteners and components. Is the die compatible with standard die holders? The die is designed for standard mounting in common holders and supports metric ISO threads to DIN 13, facilitating integration into existing tooling setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of secure clamping and zinc die-cast durability to maintain accurate threads with minimal rework; the compact 20 mm die acceptance and 200 mm overall length speed up set-up and handling. Order directly via Metav Werkzeuge or ask the consultants for application advice. Threading die holder DIN 225 D 20 mm H 5 mm (zinc die-cast) – TECWERK Threading die holder DIN 225 D 20 mm H 5 mm (zinc die-cast) – TECWERK is a compact holder designed for fastening closed and slotted dies in line with the DIN 225 standard, suitable for manual threading tasks and maintenance work. Holds closed and slotted dies DIN 225 Zinc die-cast body for corrosion resistance Accepts dies with 20 mm outside diameter Overall length 200 mm with screw handle Precise clamping that minimises rework The DIN 225 design ensures repeatable alignment when cutting external threads: the integrated screws and the screw-in handle clamp dies firmly to prevent movement during manual cutting. This secure clamping reduces the risk of off-centre starts and thread pitch errors, which in turn lowers scrap rates and saves time on rework. For workshops requiring consistent thread quality, the robust securing mechanism delivers measurable gains in process reliability. Material choice for everyday workshop demands Constructed from zinc die-cast, the holder combines dimensional stability with corrosion resistance appropriate for routine shopfloor use. The chosen alloy offers a good balance between weight and stiffness, enabling comfortable manual operation without sacrificing structural integrity. This material decision supports durability under regular handling and exposure to cutting fluids, extending service life and reducing the frequency of replacements. Compact dimensions for accessible handling and compatibility With an overall length of 200 mm, a height of 5 mm and acceptance of dies with a 20 mm outside diameter, the holder provides reach and control in confined spaces while remaining easy to manipulate. Compatibility with closed and slotted dies allows the same tool to be used across common thread-cutting tasks, simplifying inventory and shortening changeover times. The low profile contributes to better visibility of the cutting point and a more comfortable working posture. Practical benefits for efficient workshop workflows Designed for manual threading operations, the holder helps accelerate small-batch production and repair jobs by reducing set-up complexity and ensuring consistent clamping force. The combination of familiar standards, straightforward handling and resilient construction makes it a reliable choice for maintenance engineers and tradespeople aiming to improve throughput without complex investments. Integration into existing tool sets is straightforward due to the normative DIN 225 fit. For procurement and tailored advice on the TECWERK threading die holder, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for fast, expert support and dependable supply. Technical Data Article number: 2000867871NW Manufacturer: TECWERK Packaging unit: 1 Core measurements Overall length: 200 mm Height: 5 mm Die outside diameter: 20 mm Standard: DIN 225 Materials & features Material: zinc die-cast Includes screws and screw-in handle For closed and slotted dies Norm-compliant DIN 225 FAQ Which dies are compatible with this holder? The threading die holder DIN 225 accepts closed and slotted dies designed to the DIN 225 standard with an outside diameter of 20 mm, allowing use with common metric die sets. Is the zinc die-cast body corrosion resistant enough for workshop use? The zinc die-cast construction of the TECWERK die holder offers good resistance to rust in standard workshop environments; routine cleaning and light oiling after use will maintain performance. How is a die secured in the holder? Dies are fixed by the supplied screws and the screw-in handle, which provide firm clamping to prevent slippage during manual threading operations. Is the holder suitable for production or only for manual repairs? This holder is intended for manual threading tasks and maintenance work; its design supports efficient small-batch and repair applications rather than high-speed automated production. What are the exact dimensions for planning and storage? Key dimensions: overall length 200 mm, height 5 mm, die outside diameter 20 mm; the holder conforms to DIN 225 for predictable fitment. Manufacturer / Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund

Take advantage of the combination of a recognised DIN standard, robust zinc die‑cast construction and easy handling for consistent, time‑efficient threading operations; order the part directly via Metav Werkzeuge or contact our consultants for application advice. Die holder DIN 225 D20mm H7mm — Zinc die‑cast (TECWERK) Die holder DIN 225 D20mm H7mm is a sturdy zinc die‑cast holder designed for manual threading with closed and slotted round dies, supplied complete with mounting screws and a screw‑in handle for reliable grip and straightforward operation DIN 225 standard for universal compatibility Zinc die‑cast construction for stable clamping Supplied with screws and screw‑in handle Fits closed and slotted round dies D20mm Consistent thread quality through secure clamping The die holder is designed to deliver reproducible results by combining the dimensional conformity of DIN 225 with a secure clamping geometry. Using a holder made to standard promotes interchangeability across die sets and reduces setup variation, which in turn lowers rework and scrap rates. Where repeatability matters in maintenance or small‑batch production, the combination of D20mm compatibility and stable clamping ensures threads form cleanly and concentricity is maintained during manual operation. Compact design that speeds up workshop tasks A compact overall length of 200mm and a low profile 7mm height keep the tool easy to manoeuvre in confined spaces while providing the leverage required for manual threading. The zinc die‑cast construction balances rigidity with manageable weight, simplifying handling over extended use. Supplied mounting screws and a screw‑in handle enable quick installation and swap‑out of closed or slotted dies, cutting downtime between jobs and improving throughput for general workshop and service applications. Straightforward operation and clear technical conformity Closed dies and slotted dies both seat securely in the holder, with the slotted version permitting cutting‑through configurations where chip evacuation is necessary. The screw‑in handle offers a positive connection to the holder for manual torque transfer and can be removed for storage or replacement. Conformity to DIN 225 means tooling choices remain broad and sourcing parts is simplified, making this holder a pragmatic choice for maintenance departments, technicians and trade professionals who prioritise robust, standards‑based tooling. Contact Metav Werkzeuge for tailored advice or to order the TECWERK die holder directly from Metav Werkzeuge’s specialists via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867872NW Description: Die holder DIN 225, D20mm, H7mm, zinc die‑cast Brand: TECWERK Includes: mounting screws and screw‑in handle Facts Diameter: 20 mm Height: 7 mm Overall length: 200 mm Packaging unit: 1 Special features DIN 225 standard Zinc die‑cast material Compatible with closed and slotted round dies Supplied ready for assembly FAQ What dies fit this holder? The die holder DIN 225 D20mm H7mm accepts closed and slotted round dies in the 20 mm size range and is designed to meet DIN 225 interchangeability. Is the holder ready to use on delivery? Yes, the TECWERK die holder is supplied with mounting screws and a screw‑in handle so it arrives ready for immediate assembly and use. What does the zinc die‑cast construction mean for daily use? Zinc die‑cast offers a stable, corrosion‑resistant body with sufficient rigidity for manual threading tasks; the die holder maintains clamping accuracy while remaining easy to handle. Does the product comply with recognised standards? The holder conforms to DIN 225, ensuring dimensional compatibility with standard round dies and simplifying replacement or upgrade of tooling. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS cutting material, a Form B closed pre-slit design and a precise 6g tolerance, this die delivers consistent metric fine threads and low rework rates for steel components up to approximately 800 N/mm². Order the Metric Fine Round Die MF20x1.5 directly via Metav Werkzeuge or ask our consultants if needed. Metric Fine Round Die MF20x1.5, HSS Form B – TECWERK The Metric Fine Round Die MF20x1.5 is a Form B round die in high-speed steel, engineered for cutting ISO fine metric threads in medium-strength steels and workshop production settings. HSS cutting material for long life MF20x1.5 metric fine thread 6g Closed, pre-slit Form B design For steels up to 800 N/mm² strength Conforms to DIN EN 22568 Precision threading that reduces inspection and rework The MF20x1.5 die is designed to produce repeatable, accurate metric fine threads with the 6g tolerance commonly required for standard external threads. Manufactured to DIN EN 22568, the tool’s geometry and the closed, pre-slit Form B profile ensure that the cutting edges maintain consistent tooth engagement across the full 14 mm height. This results in threads that meet dimensional expectations without excessive finishing, enabling smoother assembly and fewer rejects during serial production. The high-speed steel composition combines cutting performance with the ability to be reground, supporting long-term tool economy. Reliable performance across typical workshop steels Specified for use in steels up to approximately 800 N/mm², the die balances toughness and hardness to handle common structural and engineering materials. The closed pre-slit construction helps contain chips and promotes uniform chip evacuation, which in turn preserves thread flank quality and reduces the likelihood of seizing during interrupted cuts. In practice, this means shorter cycle times and more predictable throughput when producing fine-pitch metric threads for assemblies where fit and finish are important. Built for durability, simple handling and consistent fit The cutting material HSS offers wear resistance suited to workshop and light industrial environments while remaining serviceable for regrinding when required. The compact 14 mm height provides sufficient engagement to produce a full-profile thread, yet remains convenient to seat in standard round-die holders for hand or machine-driven applications. Because the die is specified for metric ISO fine threads and manufactured to recognised standards, it supports interchangeability and simplifies quality control during incoming inspection and assembly processes. For reliable metric fine-thread production with TECWERK quality, contact Metav Werkzeuge for order details or technical advice—telephone +49 2822 7131930 or email info@metav-werkzeuge.com to confirm suitability and delivery from our Emmerich stock Technical Data Article number: 2000867771NW Designation: Metric fine round die MF20x1.5 HSS 6g TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867771NW Facts Thread size: MF20x1.5 Tolerance: 6g Height: 14 mm Material strength rating: up to approx. 800 N/mm² Standard: DIN EN 22568 Special features Form B Closed, pre-slit design Cutting material: HSS For metric ISO fine threads (DIN 13 MF) FAQ What thread does this die cut? The Metric Fine Round Die MF20x1.5 cuts MF20x1.5 metric fine threads with a 6g external tolerance (SKU 2000867771NW), suitable for standardised external thread fits. Which materials is the die intended for? This TECWERK HSS die is specified for use in steels up to approximately 800 N/mm²; it was developed for common engineering and structural steels within that strength range. What are the benefits of the closed, pre-slit Form B design? A closed, pre-slit Form B profile provides controlled chip formation and better alignment of the cutting edges, which helps to produce a clean flank geometry and reduce thread distortion. Is this die suitable for repeated production runs? Yes, the combination of HSS cutting material and standard-compliant geometry makes the die appropriate for workshop and small-series production where consistent thread quality is required. How should the die be mounted for safe operation? The round die engages over a 14 mm height and is intended to be used in a compatible round-die holder to ensure stable engagement and correct alignment during cutting. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the robust zinc die‑cast construction and DIN 225 compatibility for dependable thread‑cutting operations; the integrated screws and screw‑in handle ensure secure clamping of closed and slotted dies and extended reach with a 220 mm overall length. Order directly via Metav Werkzeuge or consult our specialists for technical advice. Die holder DIN 225 — zinc die‑cast, D 25 mm, H 9 mm (TECWERK) A Die holder DIN 225 designed to accept closed and slotted round dies for standard thread‑cutting tasks, combining stable clamping with straightforward handling. DIN 225 compatibility for standard round dies Zinc die‑cast body for stable clamping Includes screws and screw‑in handle 220 mm overall length for extended reach Precision clamping for efficient thread production The holder offers reliable clamping of round dies thanks to its screw fastenings and screw‑in handle, which together deliver repeatable positioning and minimal runout. Built to the DIN 225 standard, the device simplifies tool selection and integration into existing workflows; compatibility with both closed and slotted dies reduces setup time. For workshops that prioritise throughput, the design supports consistent thread profiles and reduces the need for rework, translating into measurable time savings on serial operations. Durable construction for regular workshop use Manufactured from zinc die‑cast, the holder balances stiffness with corrosion resistance for daily use in metalworking environments. The low‑maintenance material provides stable support for the die and resists deformation under torque, helping to maintain thread quality over extended service life. The compact 9 mm head profile minimises interference during turning and tapping sequences, while the 220 mm length increases reach for jobs on longer shafts or when additional clearance is required. Practical handling and clear technical fit Fitted with the necessary screws and a screw‑in handle, the product enables quick die changes and secure locking without additional tooling. The integrated features support ergonomic operation and controlled torque transmission during manual thread cutting. Where machine compatibility is required, the holder’s standard dimensions conform to common workshop norms, making it a pragmatic addition to tooling sets for maintenance shops, toolrooms and small production lines that rely on tried‑and‑tested accessories to keep processes running smoothly. For reliable TECWERK die holders and expert guidance from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability and placement for specific applications Technical data Article number: 2000867873NW Product name: Schneideisenhalter DIN 225 D.25mm H.9mm Zinkdruckg.TECWERK Manufacturer: TECWERK Core specifications Standard: DIN 225 Diameter (D): 25 mm Height (H): 9 mm Overall length: 220 mm Packaging unit: 1 Materials & features Material: zinc die‑cast Includes screws and screw‑in handle Accepts closed and slotted dies Designed for thread‑cutting applications FAQ Which die types fit this holder? The holder accepts both closed and slotted dies according to DIN 225, allowing the use of standard round dies in either format. Is the holder ready for immediate use on the bench? Yes, the item is supplied with the required screws and a screw‑in handle so the TECWERK die holder (SKU 2000867873NW) is ready for mounting and operation. What materials is the body made from and why does it matter? The body is made from zinc die‑cast, chosen for its dimensional stability and resistance to deformation under clamping loads, which helps maintain consistent thread quality. What is the overall length and how does that affect use? The overall length is 220 mm, providing extra reach for operations on longer workpieces or where additional clearance is necessary during manual threading. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the robust combination of HSS cutting material, metric ISO thread M22×2.5 and a precise 6g tolerance for consistent external threads; the construction and DIN compliance ensure reliable performance in steel applications. Order the threading die directly via Metav Werkzeuge or ask the consultants if needed. Threading die Form B M22×2.5 mm HSS 6g — TECWERK (round die, metric ISO thread) Threading die Form B M22×2.5 mm HSS 6g — TECWERK is designed for cutting a metric ISO external thread with standard tolerance, optimised for workshop and industrial use on medium-strength steels. HSS cutting material Metric ISO thread M22×2.5 Tolerance field 6g Suitable for steels up to approx. 800 N/mm² Consistent precision for demanding assemblies The die delivers repeatable results thanks to HSS material and conformity with DIN EN 22568, which together support high precision and wear resistance during thread production. The tool is suited to forming sharp, accurate external threads on components requiring standardised fits; the 6g tolerance ensures predictable assembly behaviour without the need for extensive rework. Where process reliability is essential, the compliance with DIN standards provides a measurable baseline for quality control and inspection. Robust performance for steel machining Designed for machining in steels up to approx. 800 N/mm², this tool maintains geometry and cutting edges under normal production loads. The closed, pre-slit form reduces the risk of unsecured chips while stabilising the cutting action, which contributes to more uniform thread flanks and extended tool life. By specifying a die with these attributes, shops benefit from fewer interruptions and a steadier throughput when producing batches of bolts or shafts with external threads. Design that improves handling and cycle times The Form B profile and 22 mm nominal height provide a compact yet stable working length that is compatible with common holders and thread-cutting fixtures. The pre-slit construction assists chip evacuation and reduces the tendency for jamming in interrupted cuts. This combination of features is intended to streamline the threading step within an assembly process: shorter cycle times, fewer corrective passes and improved first-pass yields all contribute to lower overall production cost per threaded part. Clear technical conformity and easy specification Because the die follows the metric ISO thread system (DIN 13) and the production standard DIN EN 22568, it is straightforward to match with drawing specifications and inspection plans. The material selection and tolerance class support documentation of process capability and help reduce ambiguity in procurement and incoming inspection. For teams that value traceability and repeatability, this threading solution provides a clear, standards-based component that integrates with established workflows. For precise metric threading from TECWERK and stock availability via Metav Werkzeuge, contact our specialists for order placement or technical matching — Metav Werkzeuge ships from Emmerich and can be reached by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 2000867752NW Description: Threading die Form B M22×2.5 mm HSS 6g Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M22×2.5 Tolerance: 6g Height: 22 mm Suitable for steels up to approx. 800 N/mm² Standard: DIN EN 22568 Special features Material: HSS Closed, pre-slit form Form: B Metric ISO thread (DIN 13) FAQ What materials can be machined with this die? The die is suitable for machining medium-strength steels; it is specified for use in steels up to approx. 800 N/mm², which covers a wide range of common workshop applications for the TECWERK threading die. How does the 6g tolerance affect assembly? A 6g tolerance provides a standard external thread accuracy that balances manufacturing ease and reliable fit in assemblies; the TECWERK die produces threads that meet this tolerance class for predictable mating behaviour. Is the die compatible with standard holders and fixtures? Yes, the Form B geometry and 22 mm height were chosen to be compatible with common round-die holders and production fixtures used for metric external threads. Which standard ensures the die's production quality? Production conformity is guided by DIN EN 22568 and metric ISO thread definitions (DIN 13), giving clear references for inspection and acceptance criteria for threads cut with this die. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the combination of HSS cutting performance, DIN-compliant metric fine thread accuracy and a closed, pre-slit Form B design for consistent thread production; order directly via Metav Werkzeuge or consult the technical team for application advice. Die Form B MF22×1.5 mm (HSS, 6g) – Closed, Pre-slit – TECWERK The die Form B MF22×1.5 mm (HSS, 6g) is a closed, pre-slit hand die for producing DIN‑compliant metric fine threads, suitable for workshop and light production use in medium-strength steels High-speed steel (HSS) cutting material DIN EN 22568 compliant metric fine thread Closed, pre-slit Form B construction For steels up to approx. 800 N/mm² Accurate, standard-compliant thread production for consistent assemblies This hand die delivers repeatable results thanks to the combination of HSS cutting edges and conformity with DIN EN 22568. The specification MF22×1.5 mm with tolerance 6g ensures threads match the metric fine thread profile defined in ISO standards, reducing the need for trial fittings and rework. Where interchangeability and assembly reliability matter, this tool supports consistent pitch and flank geometry; traceable standards compliance aids documentation and quality control in routine workshop processes. Robust shape and chip control for medium-strength materials The closed, pre-slit configuration in Form B provides improved stability during cutting and helps to contain chips, which supports cleaner threading and less operator intervention. At a height of 16 mm, the die body offers sufficient bearing surface for manual or holder-mounted operation, while being compact enough for maintenance tasks. The tool is rated for use in steels up to approx. 800 N/mm², making it suitable for common structural and mechanical components where fine-pitch threads are required. Practical benefits in the workshop: uptime, handling and longevity Designed for straightforward handling, the die reduces set-up time compared with adjustable or segmented systems and minimises thread corrections. The HSS cutting material balances edge retention and resharpening potential for extended service life in everyday threading tasks. For unusual materials or high-volume production a technical check is recommended; the Metav technical team can advise on process parameters and holder compatibility to ensure optimal performance and minimal downtime. Contact Metav Werkzeuge for tailored advice on this TECWERK die and to arrange supply—call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: 2000867772NW Item name: Die Form B MF22×1.5 mm HSS 6g TECWERK Manufacturer: TECWERK Packaging unit: 1 Core data Thread size: MF22×1.5 mm Tolerance: 6g Height: 16 mm Material strength (application): up to approx. 800 N/mm² Standard: DIN EN 22568 Special features Cutting material: HSS Form: B Closed, pre-slit design Metric fine thread (DIN 13 MF) FAQ What thread form and tolerance does this die produce? The die produces a metric fine thread MF22×1.5 mm with tolerance 6g, conforming to DIN EN 22568 for consistent mating with standard components. Which materials can be machined with this die? The die is specified for use in steels up to approx. 800 N/mm²; it is intended for conventional steel grades where a fine-pitch, DIN‑compliant thread is required. Is the die suitable for production as well as maintenance work? Yes, the closed Form B design and HSS cutting material make it appropriate for both workshop maintenance and light production runs, offering stability and repeatable thread quality. How does the closed, pre-slit design affect performance? The closed, pre-slit construction improves chip control and cutting stability, which helps to reduce the risk of thread distortion and decreases manual rework. What is the recommended mounting or handling method? This is a hand die intended for use with a compatible die holder or manual stock; for sustained high-volume use, consult the Metav technical team about suitable holders and cutting parameters. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of durable HSS cutting performance and precise ISO-thread tolerance for reliable thread production; benefit from reduced rework and consistent fitting. Order the tool directly via Metav Werkzeuge or consult the team for specification matching. Thread cutting die Form B M27×3 mm HSS 6g by TECWERK A thread cutting die designed for metric ISO threads, built for robust external threading on medium-strength steels and routine workshop use High-speed steel (HSS) cutting material Metric ISO thread M27×3 mm DIN 13 Tolerance field 6g for consistent fits For steels up to 800 N/mm² tensile Closed, pre-slit Form B design Precise threading made repeatable The combination of HSS cutting material and the DIN EN 22568 specification delivers a tool for dependable external thread production. The hardened high-speed steel ensures a long service life under regular workshop loads, while the tolerance field 6g provides repeatable, standard-compliant fits that reduce the need for post-process adjustment. For procurement and production planning, this means fewer rejects and lower rework rates, improving throughput in small-batch and maintenance environments. Robust Form B design reduces setup time The closed, pre-slit Form B format keeps engagement stable during cutting and helps control chip formation on external threads. With a height of 25 mm, the die offers secure clamping in standard holders and steady contact across the thread flank, which supports uniform material removal. Designed for steels up to approximately 800 N/mm² tensile strength, the geometry balances cutting performance and tool life, helping to maintain surface finish quality and dimensional conformity without frequent regrinding. Workshop integration and supplier reliability Supplied as a single unit and identified by SKU 2000867737NW, this TECWERK threading solution slots easily into existing tooling assortments and maintenance kits. The metric M27×3 mm sizing follows DIN 13 for immediate compatibility with standard nuts and bolts. Sourcing via Metav Werkzeuge brings added procurement confidence: a broad product range, central stock in Emmerich, and decades of precision experience that support quick fulfilment and consistent quality for industry and trade. For reliable external threads with standard-compliant tolerance, contact Metav Werkzeuge to secure the TECWERK Form B M27×3 mm HSS die and receive tailored advice from the Metav team Technical data Article number: 2000867737NW Brand: TECWERK Packaging unit: 1 Facts Thread size: M27×3 mm Standard: DIN EN 22568 / DIN 13 Cutting material: HSS Height: 25 mm Tolerance: 6g Special features Closed, pre-slit Form B Suitable for steels up to approx. 800 N/mm² tensile strength Metric ISO thread for standardised fittings FAQ What materials can be machined with this die? The TECWERK Form B die is specified for use on steels up to approximately 800 N/mm² tensile strength; the HSS cutting material supports routine workshop steel threading. Which thread standard does the die follow? The die conforms to meteric ISO threads as per DIN 13 and the material standard reference DIN EN 22568. How does the pre-slit Form B affect performance? The closed, pre-slit Form B design controls chip evacuation and provides consistent engagement, which helps produce uniform external threads and reduces the chance of thread damage. Is the tolerance suitable for mating parts? With a tolerance field of 6g, the die produces threads that meet standardised clearances for reliable fits with typical nuts and bolts. What holder dimensions are required for the die? The die has an overall height of 25 mm and is compatible with standard round die holders designed for Form B tooling. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Reliable and simple to fit, the zinc die-cast threading die holder to DIN 225 secures both closed and slotted dies and gives extended reach with its 270 mm overall length; its compact 11 mm profile is ideal for confined components. Take advantage of the combination of robust material, DIN conformity and quick die changeover — order the holder directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Threading Die Holder DIN 225, Ø30 mm, Zinc Die‑Cast The TECWERK threading die holder DIN 225 is a compact tool for secure manual threading and fast die changes on maintenance benches and small engineering workstations. *Threading die holder to DIN 225 standard *Accepts solid and slotted dies with screws *Zinc die‑cast body for lightweight durability *Overall length 270 mm for extended reach Precise alignment and fast changeovers for threading tasks Designed to the recognised DIN 225 standard, the holder delivers consistent alignment for conventional threading operations. It accommodates both closed and slotted dies, fastening them with the supplied screws and an easily engaged screw‑in handle to reduce setup time. The combination of a low-profile 11 mm working height and an overall length of 270 mm provides better access to recessed or awkwardly placed components, improving reach without compromising control. This arrangement supports predictable results in repair and maintenance work where repeatability counts. Lightweight construction that still feels robust in use The main body is manufactured from zinc die‑cast, which balances lightweight handling with sufficient dimensional stability to withstand routine manual torque. The material’s corrosion-tolerant nature keeps maintenance straightforward and helps preserve alignment during repetitive operations. The design emphasises secure clamping of the die while keeping the tool easy to handle for extended periods, making it practical for workshops where frequent die changes and modest workloads are typical. Integrates into workshop routines to reduce downtime A straightforward fastening concept — screws plus a removable handle — enables rapid die swaps and predictable cycle times, supporting efficient workflows on maintenance benches and small production tasks. The holder is particularly useful for general thread repair and small-batch runs where tool simplicity and repeatability improve throughput. Supplied complete with fastening screws and a screw‑in handle, the accessory reduces the need for additional fixtures and helps keep the tool trolley organised. For reliable threading performance with TECWERK’s die holder, contact Metav Werkzeuge for procurement guidance and fast dispatch from Emmerich: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867874NW Designation: Threading die holder DIN 225 Ø30 mm H 11 mm Brand: TECWERK Packaging unit: 1 Facts Diameter: 30 mm Height: 11 mm Overall length: 270 mm Special features Material: zinc die‑cast Standard: DIN 225 compatibility Accepts closed and slotted dies Supplied with screws and screw‑in handle FAQ Which dies fit this holder? The TECWERK threading die holder conforms to DIN 225 and is designed to accept both closed and slotted threading dies with a nominal Ø30 mm seating. How is the die fastened in the holder? The die is secured using the supplied screws and the removable screw‑in handle, which provides mechanical advantage for reliable clamping and quick changes. What are the main dimensions to consider? Key dimensions are an overall length of 270 mm, a working height of 11 mm and a die seating diameter of 30 mm, as specified for the holder. What material is the holder made from and what are the benefits? The holder is produced from zinc die‑cast, offering a lightweight but stable body with good surface corrosion tolerance and low maintenance requirements. Is this holder suitable for workshop repair and maintenance? Yes, the design and quick-change fastening make the TECWERK die holder (SKU 2000867874NW) well suited to garage, maintenance and small engineering shop environments where efficient, repeatable threading is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund