Take advantage of the combination of high-strength HSS cutting material, DIN EN 22568 conformity and a tolerance field of 6g for consistent thread quality with minimal rework; order the tool directly via Metav Werkzeuge or request advice from our consultants for application-specific recommendations TECWERK round die, form B — M18 x 2.5 mm, HSS, tolerance 6g The round die, form B M18 x 2.5 mm by TECWERK is a compact external thread cutter for producing metric ISO threads in medium-strength steels and general workshop applications HSS cutting material for high durability Metric ISO thread M18 x 2.5 mm Tolerance field 6g for precise fit For steels up to ~800 N/mm² tensile strength Precision threads for reliable assemblies The compact TECWERK round die M18 x 2.5 mm delivers consistently accurate external threads thanks to its DIN EN 22568 design and a 6g tolerance that supports reliable assembly fits. The closed, pre-slotted construction ensures stable chip formation and controlled cutting behaviour; this reduces the likelihood of thread deformation and lowers the rate of rejected parts. The high-speed steel (HSS) cutting material offers a balance between edge retention and toughness, making the tool suitable for repeated use in busy production and maintenance environments. Optimised for workshop productivity A short setup time and the die’s robust geometry translate into measurable time savings on batch work. The form B configuration provides a straightforward cutting profile that is resilient under intermittent loading, enabling faster throughput for repair and assembly tasks. For workshops focused on efficiency, the combination of a metric ISO profile and the pre-slotted, closed design reduces the need for frequent re-clamping and rework. Fewer interruptions mean less machine downtime and a smoother production flow, which supports improved overall productivity. Compliance, material compatibility and safe handling Designed to the standard DIN EN 22568, this external thread cutter is suitable for machining steels with tensile strengths up to approximately 800 N/mm². The HSS cutting material tolerates standard workshop conditions while maintaining cutting performance. Clear material compatibility and standard conformity simplify process planning and quality documentation. For safe handling, observe standard machining practices and use appropriate lubrication to extend the die’s service life and ensure uniform thread quality across each workpiece. For an expert supply and application consultation for TECWERK cutting tools, contact Metav Werkzeuge to benefit from their quality filter in Emmerich and ensure the right choice for production needs Technical data Article number: 2000867748NW Name: Round die, form B, M18 x 2.5 mm, HSS, tolerance 6g Brand: TECWERK Packaging unit: 1 Facts Height: 18 mm Thread size: M18 x 2.5 mm Tolerance: 6g Recommended material strength: up to ~800 N/mm² tensile strength Special features Cutting material: HSS Standard: DIN EN 22568 Closed, pre-slotted form Form: B FAQ Which materials can be machined with this die? The TECWERK round die M18 x 2.5 mm (SKU 2000867748NW) is specified for steels up to approximately 800 N/mm² tensile strength; the HSS cutting material provides resilience for general steel applications What does the 6g tolerance mean for assembly fit? A tolerance of 6g indicates a standard external thread class that produces a reliable running fit with corresponding internal threads, helping to ensure consistent assembly and interchangeability Is this die compatible with metric ISO threads only? Yes, the tool is configured for metric ISO external threads to DIN 13 and conforms to DIN EN 22568, making it suitable where standardised metric threads are required How does the closed, pre-slotted design affect performance? The closed, pre-slotted design improves chip control and cutting stability, which supports cleaner threads and reduces the risk of jamming or distortion during cutting Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Formulated for robust, repeatable threading in demanding environments, this die combines HSS‑E cutting material with a 6g tolerance and a closed, pre‑slit Form B design to produce accurate metric threads in hard‑to‑machine alloys; Order the TECWERK M18×2.5 die directly via Metav Werkzeuge or ask our consultants if needed. TECWERK round die Form B M18×2.5 HSS‑E 6g TECWERK round die Form B M18×2.5 HSS‑E 6g is a metric ISO threading die designed for cutting external threads in high‑strength, corrosion‑resistant and special alloy steels. HSS‑E cutting material for high hot hardness Metric ISO M18×2.5 thread, tolerance 6g Closed, pre‑slit Form B for better chip control Suitable for stainless and high‑strength alloys up to 1200 N/mm² Reliable cutting performance and extended tool life The use of HSS‑E (cobalt‑alloyed high‑speed steel) gives this die superior wear resistance and elevated hot hardness compared with standard steels, which translates into longer service life under heavy use. For operations that demand repeatable thread quality, the combination of the cobalt‑enriched cutting material and the die’s geometry reduces the frequency of tool changes and rework. This performance advantage is particularly valuable in small series production and maintenance workshops where downtime and consumable turnover are critical cost factors. Engineered for hard‑to‑machine and stainless materials Designed specifically for use with stainless, heat‑ and acid‑resistant steels, special alloys and steels up to 1200 N/mm², the die maintains cutting stability where conventional tooling can fail. The geometry and material selection control temperature at the cutting edge and improve chip formation, which prevents galling and preserves thread profile integrity. For processors working with demanding materials, this behaviour means cleaner thread flanks and consistent tolerance adherence, supporting downstream assembly and sealing functions without additional finishing passes. Standards, tolerance and practical design for precise threads Conforming to DIN EN 22568 and intended for metric ISO thread DIN 13, the tool delivers threads to 6g tolerance for reliable external fits. The Form B configuration in a closed, pre‑slit design balances rigidity and chip clearance: the closed outer ring ensures concentricity and guidance during cutting, while the pre‑slit sections permit controlled expansion and chip evacuation. With a working height of 18 mm, the die is compact yet robust, suitable for bench use and holder systems where stability and repeatability are required. This combination of standards and form provides clear orientation for quality assurance and simplifies selection in technical procurement. For secure, precision threading in high‑strength and corrosion‑resistant materials, contact Metav Werkzeuge to check availability of the TECWERK M18×2.5 round die (SKU 2000867849NW) and obtain expert advice by e‑mail at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 2000867849NW Name: Round die Form B M18×2.5 HSS‑E 6g TECWERK Manufacturer: TECWERK Packaging unit: 1 Internal ID: 2000867849NW Facts Thread size: M18×2.5 Height: 18 mm Tolerance class: 6g Tensile strength capacity: up to 1200 N/mm² Standard: DIN EN 22568 Thread standard: metric ISO thread DIN 13 Special features Cutting material: HSS‑E (cobalt‑alloyed high‑speed steel) Form: B (closed, pre‑slit) Type: VA Application: hard‑to‑machine materials, stainless, heat‑ and acid‑resistant steels, special alloys FAQ What materials is this die suitable for? The TECWERK round die M18×2.5 HSS‑E 6g is suitable for stainless steels, heat‑ and acid‑resistant steels, special alloys and carbon steels up to around 1200 N/mm² tensile strength. Which thread standard and tolerance does it meet? Threads produced by this die conform to metric ISO thread DIN 13 and the die is manufactured to DIN EN 22568 with a tolerance class of 6g. What advantage does HSS‑E offer for threading? HSS‑E in the TECWERK die increases hot hardness and wear resistance during continuous cutting, improving lifespan and maintaining thread geometry in demanding applications. How does the closed, pre‑slit Form B affect performance? The closed outer form gives guidance and concentricity, while the pre‑slit design allows controlled expansion and better chip evacuation, which reduces the risk of jamming and improves surface quality. Is this item available for single purchase or only in sets? The product is supplied in a packaging unit of 1 under SKU 2000867849NW for single‑item procurement. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a durable HSS‑Co cutting grade and a precise 6g tolerance to produce repeatable M20×2.5 metric threads in demanding materials; order the TECWERK threading die via Metav Werkzeuge or consult the Metav team for application matching. Threading die Form B, M20×2.5 HSS‑Co 6g — TECWERK (Metrical ISO thread) Threading die Form B, M20×2.5 HSS‑Co 6g designed for cutting ISO‑metric threads in hard‑to‑machine steels and special alloys, with a closed, pre‑slotted configuration for reliable chip control HSS‑Co grade for high wear resistance Metric ISO M20×2.5 DIN 13 threading Tolerance field 6g for precise fit Suitable for steels up to 1200 N/mm² Consistent, industrial‑grade thread quality for production use The HSS‑Co cutting material (cobalt‑alloy high‑speed steel) provides elevated hot‑hardness and abrasion resistance compared with standard HSS, so the tool sustains its cutting geometry under thermal load. Specified as DIN EN 22568 and intended for metric ISO threads, the die produces a repeatable M20×2.5 profile in accordance with DIN 13, which supports interchangeability on assemblies. The closed design ensures a full‑profile thread, while the pre‑slotted geometry aids chip breaking to maintain surface finish and reduce rework. Reduced downtime and extended service life for demanding materials Designed for processing stainless, heat‑ and acid‑resistant steels and a range of special alloys, the die is rated to handle workpiece strengths up to 1200 N/mm², enabling use on tougher substrates without premature wear. The 6g tolerance delivers a reliably snug fit where thread engagement and assembly integrity matter; this reduces the need for corrective machining and streamlines production flow. For workshops focused on throughput, the combination of durable material and precise tolerancing lowers total rework time. Practical application and handling recommendations for workshop integration With a nominal height of 18 mm and Form B configuration, the component fits standard die holders and handles conventional cutting fluids for improved chip evacuation and surface finish. The designation Type VA indicates the manufacturer variant and compatibility within the same product family. For best results on high‑strength or stainless steels, use appropriate lubricant and stable fixturing; the robust construction supports repeated use in a production setting while preserving thread geometry and dimensional accuracy. For procurement or technical matching of the TECWERK M20×2.5 HSS‑Co die, contact Metav Werkzeuge — Metav’s experts can advise on compatibility and supply from Emmerich; eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867850NW Product label: Threading die Form B M20×2,5mm HSS‑E 6g TECWERK Manufacturer: TECWERK Packaging unit: 1 UID: 2000867850NW Facts Thread size: M20×2.5 Height: 18 mm Tolerance: 6g Strength capability: up to 1200 N/mm² Special features Cutting material: HSS‑Co (HSS‑E) Standard: DIN EN 22568 Thread standard: Metric ISO, DIN 13 Form: B, closed, pre‑slotted Type: VA Application: for difficult‑to‑machine materials, stainless and heat‑resistant steels, special alloys FAQ What materials can this die machine effectively? The TECWERK threading die is suited for stainless, heat‑ and acid‑resistant steels and various special alloys, and is specified for applications up to 1200 N/mm² tensile strength. What does the 6g tolerance mean for assembly? Tolerance 6g indicates the external thread fit class in the metric ISO system, providing a consistent fit that supports reliable assembly without excessive clearance. Is the die compatible with standard die holders? Yes; the Form B geometry and 18 mm height align with common die holder dimensions used in machining and maintenance shops. Why choose HSS‑Co over standard HSS for threading? The HSS‑Co grade offers improved hot‑hardness and wear resistance, extending tool life and maintaining cutting edges during intermittent heat exposure typical of stainless and high‑strength steels. What is the function of the pre‑slotted, closed form? The closed, pre‑slotted form ensures full‑profile threads while the slots help break chips and reduce clogging, improving surface finish and reducing the risk of tool seizure. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from robust HSS construction, a precise M20×2.5 metric thread with tolerance 6g, and a closed, pre-slotted Form B that delivers consistent external threads and extended tool life; order the die directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Die, Form B M20×2.5 mm HSS, tolerance 6g — External thread cutter with DIN EN 22568 compliance The TECWERK die, Form B M20×2.5 mm HSS, is a compact, high-speed-steel external thread cutter designed for metric ISO threads and industrial workshop use HSS cutting material for durability Metric M20×2.5 ISO thread, tolerance 6g Closed, pre-slotted Form B for stability Suitable for steels up to 800 N/mm² Precision thread-cutting for consistent fits The TECWERK die is engineered to produce repeatable, accurate external threads on components requiring a defined fit. The combination of HSS cutting material and the tolerance 6g specification ensures threads meet common fit classes for bolts and shafts, reducing the need for rework. Compliance with DIN EN 22568 and the metric ISO thread form (DIN 13) means produced threads will mate reliably with standard internal threads, offering a clear technical basis for process planning and inspection. Built for workshop efficiency and minimal downtime The closed, pre-slotted Form B provides enhanced stability during hand or machine-assisted threading, which helps to maintain concentricity and reduces chatter. With a compact height of 18 mm, the die integrates easily into standard die holders and tool posts, simplifying changeover and storage. The robust HSS composition contributes directly to longer service intervals and fewer tool changes, translating into measurable time savings on production and maintenance tasks. Clear material guidance and practical compatibility Designed primarily for machining steels up to approx. 800 N/mm², this tool suits general engineering, maintenance, and fabrication tasks where consistent, industrial-grade external threads are required. The use of HSS offers a balance of toughness and wear resistance suitable for workshop environments. As the die conforms to metric ISO standards, it supports cross-compatibility across assemblies and replacement parts, which simplifies procurement and quality control for engineering teams and purchasing departments. Contact Metav Werkzeuge to confirm suitability for specific materials or assemblies; Metav Werkzeuge can advise on correct die holders and matching internal thread standards—phone +49 2822 7131930 or eMail info@metav-werkzeuge.com Technical data Article number: 2000867750NW Designation: Die, Form B, M20×2.5 mm, HSS, 6g Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M20×2.5 mm Pitch: 2.5 mm Height: 18 mm Tolerance field: 6g Standard: DIN EN 22568 Suitable tensile strength: up to approx. 800 N/mm² Special features Cutting material: HSS Form: closed, pre-slotted Form B Thread standard: metric ISO thread (DIN 13) Application: external thread cutting FAQ What materials is the die suitable for? The TECWERK die (M20×2.5 mm, HSS, SKU 2000867750NW) is specified for steels up to approximately 800 N/mm² tensile strength and is well suited to general engineering steels used in workshops. Does the die comply with recognised standards? Yes, the die meets DIN EN 22568 and produces metric ISO threads in accordance with DIN 13, ensuring compatibility with standard nuts and internal threads. What does the tolerance field 6g mean for assemblies? The tolerance 6g indicates a standard external thread tolerance class that balances manufacturability and fit quality, providing predictable mating with common internal thread tolerance classes. How does the closed, pre-slotted Form B help in use? The closed, pre-slotted Form B increases stability during cutting, reduces vibration, and helps achieve uniform thread geometry, which lowers the likelihood of rework. Is the die suitable for machine and hand use? Yes, the die's design and 18 mm height make it compatible with standard die holders and machine-driven chucks as well as conventional hand tooling for repair and maintenance tasks. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Benefit from robust HSS construction, precise M20×2.5 mm metric threading and a left-hand cutting design that supports reliable reverse-thread production; order directly via Metav Werkzeuge or consult the advisors for technical guidance. Round die M20×2.5 mm (Form B) – HSS left-hand cutting | TECWERK The Round die M20×2.5 mm (Form B, left-hand) is a closed, pre-slotted HSS die designed for cutting metric ISO threads to DIN 13 in medium-strength steels. HSS construction for long service life Metric ISO thread to DIN 13 compliance Tolerance class 6g for precise fits Left-hand cutting for reverse-thread jobs Accurate metric threading for repeatable results The tool enables consistent production of M20×2.5 mm metric ISO threads to DIN 13 with a 6g tolerance class, ensuring interchangeability and tight fits in assemblies. By specifying a defined tolerance band, the die reduces the need for secondary finishing and supports predictable assembly behaviour. This makes it suitable for workshop rework and small-batch production where dimensional conformity is essential and process reliability reduces rework time. Durable high-speed steel body for workshop demands Manufactured from HSS, the die combines wear resistance with toughness to withstand repeated engagement in metallic materials. The material selection supports threads in steels up to approximately 800 N/mm² tensile strength without rapid edge degradation. As a consequence, tool life is extended under standard cutting conditions, lowering consumable turnover and supporting sustained productivity in maintenance and production environments. Design features that simplify cutting and alignment Constructed in Form B with a closed, pre-slotted profile and a height of 18 mm, the die maintains concentricity during cutting while the pre-slots offer chip accommodation and smoother chip flow compared with fully closed, unslotted types. The left-hand cutting orientation allows the production of reverse threads or repairs on components with counter-rotating requirements. These design choices minimise cross-threading and improve start-up behaviour when paired with an appropriate holder. Suitable applications and handling recommendations Ideal for workshop repair, component manufacture and toolroom use, the die is intended for machining metric threads in medium-strength steels where a 6g tolerance is required. The component performs well in single-pass threading and re-threading tasks; when consistent surface finish and accurate pitch are priorities, the HSS geometry balances cutting performance with edge retention. For optimal results, the die is best used with a correctly sized die holder and appropriate cutting lubricant to manage chip evacuation and reduce induced stresses. For reliable left-hand metric threading with TECWERK HSS quality, contact Metav Werkzeuge in Emmerich for ordering or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: 2000867451NW SKU: 2000867451NW Manufacturer: TECWERK Facts Thread size: M20×2.5 mm Tolerance: 6g Height: 18 mm Material tensile strength suitability: up to approx. 800 N/mm² Special features Material: HSS Form: B Left-hand cutting Closed, pre-slotted form Metric ISO thread to DIN 13 Packaging unit: 1 FAQ What thread standard does this die produce? The die produces metric ISO threads in accordance with DIN 13, specified here as M20×2.5 mm with a 6g tolerance. Is the tool suitable for hardened steel components? The TECWERK HSS die is intended for steels up to approximately 800 N/mm² tensile strength; it is not specified for high-hardened alloys beyond that range. What does the pre-slotted closed form provide? The closed, pre-slotted design maintains concentricity while offering chip space to improve cutting behaviour and reduce the risk of jamming during threading. Can this die cut left-hand threads only? This is a left-hand cutting die designed specifically for reverse-thread applications and repair of left-hand threaded parts. What tolerance can be expected from the finished thread? The finished thread conforms to tolerance class 6g, delivering a precise fit suitable for standard mechanical assemblies. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combine HSS durability with DIN‑grade specification and a closed, pre‑slit Form B design for dependable metric M24×3 threads; order directly via Metav Werkzeuge or consult the technical team for precise application advice. Threading Die Form B M24×3 HSS (6g) — TECWERK A Threading Die Form B M24×3 HSS (6g) designed for cutting metric ISO threads in maintenance and production environments Solid HSS construction to DIN EN 22568 Metric ISO thread M24×3, tolerance 6g Closed, pre‑slit Form B for clean threading Suitable for steels up to ≈800 N/mm² Precision and standards for industrial threading The tool is manufactured from HSS and conforms to DIN EN 22568, providing a reliable basis for repeatable metric threading. The combination of the M24×3 nominal size and 6g tolerance field meets the expectations of DIN 13 thread standards, which ensures threads seat and engage predictably in assemblies. This standard compliance reduces scrap rates and supports quality control processes in series production and in workshop repairs. The robust construction of the die promotes consistent cutting geometry over an extended service life. Geometry that improves surface finish and process stability The closed, pre‑slit Form B design concentrates the cutting action and produces a controlled chip flow, which contributes directly to a cleaner thread profile and reduced burr formation. With a height 22 mm, the die provides sufficient engagement length for accurate thread form while remaining compact for routine handling. The closed form is particularly suited to achieving uniform flank contact, improving torque distribution during assembly and decreasing the likelihood of thread distortion under load. Practical suitability and material compatibility Manufactured for metric ISO threads as per DIN 13, the die is specified for use on steels up to ≈800 N/mm², making it suitable for common structural and engineering steels encountered in mechanical workshops. The 6g tolerance affords a reliable fit for standard fasteners, balancing assembly ease and mechanical security. For operations requiring consistent thread quality, the die’s HSS composition ensures resistance to wear during intermittent and light series use, supporting dependable part interchangeability and fewer rework cycles. For dependable metric threading with TECWERK HSS quality, contact Metav Werkzeuge for application guidance or place an order through Metav Werkzeuge to ensure fast, reliable delivery from Emmerich. Technical Data Article number: 2000867754NW Item name: Threading die Form B M24×3 HSS (6g) Manufacturer: TECWERK Packaging unit: 1 Material: HSS Facts Thread size: M24×3 Tolerance field: 6g Height: 22 mm Suitable tensile strength: ≈800 N/mm² Special features Standard: DIN EN 22568 Thread standard: Metric ISO thread DIN 13 Form: Closed, pre‑slit Form B Cutting material: HSS FAQ What thread specification does the die produce? The die produces a metric ISO thread to DIN 13 with a nominal size of M24×3 and a tolerance field of 6g. Which materials are appropriate for this die? The die is intended for use on steels with tensile strength up to approximately 800 N/mm², consistent with the TECWERK HSS specification. What does Form B, closed and pre‑slit, mean for production? Closed, pre‑slit Form B provides concentrated cutting action and controlled chip flow, resulting in a cleaner thread profile and reduced burrs for production and maintenance tasks. How does the 6g tolerance affect assembly? A 6g tolerance yields a standard fit that balances ease of assembly with mechanical retention, suitable for most general engineering fastener applications. Is the tool compliant with recognised standards? Yes, the die is manufactured to DIN EN 22568 and produces threads according to DIN 13, supporting traceable and repeatable quality. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a compact, high‑precision solution that combines HSS durability with a closed, pre‑slotted Form B for consistent external threads; order the part directly via Metav Werkzeuge or contact the technical advisors for application support. Round die Form B M3×0.5 mm HSS, left‑hand cutting (6g) – TECWERK A Round die Form B M3×0.5 mm designed for cutting left‑hand metric ISO threads to DIN 13, suitable for external threading in workshop and maintenance contexts. HSS high‑speed steel construction Left‑hand cutting for reverse threads Metric ISO thread to DIN 13, tolerance 6g Closed, pre‑slotted Form B design Durable cutting performance for repeatable threads The HSS construction provides a robust cutting edge that maintains form under repeated use, delivering consistent thread geometry and reducing rework. As a compact external threading tool, the round die supports rapid setup in common die holders and is particularly suited to small‑diameter applications such as machine maintenance and prototype assembly. The design emphasis is on longevity and repeatable results, so production flow remains uninterrupted and inspection findings stay within tolerance. Controlled tolerance and left‑hand thread capability The 6g tolerance class, specified to DIN 13, ensures threads meet standard external thread clearances required in metric assemblies. The Form B shape, which is closed yet pre‑slotted, guarantees stability during cutting while allowing slight material relief via the slot for consistent chip evacuation. The left‑hand cutting orientation produces reverse threads where required by design, eliminating the need for additional fixturing changes and supporting specialised assemblies. Application range and material suitability Rated for use with steels up to 800 N/mm² tensile strength, the tool is built to handle most common workshop steels without accelerated wear. With a thickness of 5 mm, the die offers a balance between stiffness and accessibility for small external thread runs. This combination supports reliable results in maintenance, fabrication and small‑batch production, providing the practical advantage of a standardised threading solution that integrates with existing tooling systems. Practical handling and workshop integration The compact geometry of the die, together with its pre‑slotted Form B configuration, simplifies alignment and start‑up for external threads, helping to reduce set‑up time. When used in a compatible die stock it enables steady, concentric engagement and controlled cutting forces. For operators and procurement teams seeking a dependable external threading option, the component represents a technically sound choice that aligns with established metric thread standards. For precision left‑hand external threads, request the TECWERK round die through Metav Werkzeuge — contact the technical team at info@metav-werkzeuge.com or call +49 2822 7131930 for further specification advice and availability Technical Data Article number: 2000867441NW Brand: TECWERK Packaging unit: 1 Facts Thread size: M3×0.5 mm Height (thickness): 5 mm Tolerance class: 6g Material suitability: steels up to approx. 800 N/mm² Special features Material: HSS Standard: DIN EN 22568 Form: B Closed, pre‑slotted design Left‑hand cutting Metric ISO thread to DIN 13 FAQ What materials can be machined with this die? The die is suitable for machining steels with tensile strengths up to approx. 800 N/mm²; the TECWERK HSS construction provides the necessary wear resistance for such applications. Is the die suitable for left‑hand threading only? Yes, the tool is a left‑hand cutting round die, intended to produce reverse (left‑hand) external threads in metric ISO form. What does Form B and pre‑slotted mean for performance? Form B indicates a closed die geometry that, being pre‑slotted, allows controlled chip relief and stable engagement for repeatable external threads. Which standard does the thread conform to? Threads produced conform to metric ISO requirements as specified by DIN 13, with a tolerance class of 6g for external threads. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combine high-speed steel cutting performance with a closed, pre-slotted Form B design to produce reproducible M30×3.5 mm metric ISO threads in steels up to 800 N/mm²; order the die directly via Metav Werkzeuge or consult the technical team for application advice. Threading die Form B M30×3.5 mm HSS 6g (TECWERK) — metric ISO die for workshop threading A Threading die Form B M30×3.5 mm HSS 6g (TECWERK) designed for accurate metric ISO thread cutting in medium-strength steels, suitable for production and repair tasks Metric ISO thread M30×3.5 mm High-speed steel (HSS) cutting material Closed, pre-slotted design for chip control Tolerance field 6g for ISO-fit threads Precision threads that match ISO standards and reduce rework The combination of HSS cutting material and an ISO-compliant geometry ensures repeatable results when producing M30×3.5 mm threads. Conformity with DIN EN 22568 and the metric thread form defined in DIN 13 provides an objective basis for quality control and interchangeability. The specified 6g tolerance field delivers a standard clearance fit that reduces assembly issues and minimises post-process correction. For workshops and small-scale production, this equates to fewer rejects and more predictable assembly behaviour, supporting a steady workflow and lower overall processing time. Stable cutting action for consistent surface finish and chip control The closed, pre-slotted format of Form B combines dimensional stability with an integrated chip-splitting capability. The 25 mm section height contributes to rigid engagement and maintains concentricity during the cut, helping to avoid chatter and imperfect threads. This constructive design reduces the likelihood of partial thread forming and improves the surface finish, which is advantageous where thread engagement and sealing behaviour are critical. The pre-slotted form also eases chip evacuation compared with fully closed dies, offering a balance between strength and swarf management. Material compatibility and recommended applications Specified for machining steels up to approximately 800 N/mm², the die is appropriate for common structural and engineering steels used in mechanical assemblies and maintenance operations. The HSS cutting material provides both toughness and wear resistance under moderate feeds and typical cutting speeds used for metric threading. Typical use cases include repair work, component assembly, in-house maintenance, and small-batch production where standard metric ISO threads are required. The technical specification supports informed tool selection for applications where repeatable thread geometry and ISO conformity are priorities. Simple handling and predictable service life High-speed steel offers a known balance between performance and maintainability: light resharpening restores cutting edges and routine lubrication extends tool life. The compact design facilitates quick mounting in standard die stocks or holders and the robust Form B profile supports repeated use in workshop environments. Regular use of appropriate cutting lubricant, controlled feed rates and correct alignment with the mating part will extend service intervals and preserve thread quality. Safety and handling remain straightforward thanks to the die’s stable geometry and conventional mounting dimensions. For precise metric threading in workshops and repair shops, request the TECWERK Form B M30×3.5 mm HSS 6g die via Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for specification guidance and fast dispatch from Emmerich. Technical data Article number: 2000867739NW Label: Schneideisen Form B M30x3,5mm HSS 6g TECWERK Packaging unit: 1 Facts Thread size: M30×3.5 mm Tolerance field: 6g Height: 25 mm Material: HSS Special features DIN EN 22568 Metric ISO thread (DIN 13) Form: B Closed, pre-slotted design Suitable for steels up to approx. 800 N/mm² FAQ What thread standard does the die follow? The threading die follows metric ISO geometry as referenced in DIN 13 and additional specification in DIN EN 22568, ensuring compatibility with ISO-threaded components. Which materials can be machined with this die? The TECWERK Form B die is specified for use on steels up to approximately 800 N/mm² tensile strength and is manufactured from HSS for durability in those applications. Is the die suitable for production or repair work? The die’s closed, pre-slotted design and ISO-compliant tolerance 6g make it suitable for both repair and small-batch production where consistent thread quality is required. What maintenance is recommended to preserve cutting life? Use appropriate cutting lubricant, maintain correct alignment in the die stock and inspect the HSS cutting edges; light resharpening is possible to restore performance where applicable. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust cutting solution that combines high-speed steel (HSS) construction with conformity to DIN EN 22568 and metric ISO thread standards for consistent, repeatable results in steel applications; order directly via Metav Werkzeuge or contact the consultants for specification support. Round die M36×4 mm Form B – HSS, tolerance 6g (TECWERK) The Round die M36×4 mm Form B is an external thread cutting die for metric ISO threads, designed for robust thread production in steels up to approx. 800 N/mm² tensile strength. High-speed steel (HSS) for robust cutting Conforms to DIN EN 22568 and DIN 13 Metric ISO thread M36×4 mm, tolerance 6g Closed pre-slit Form B, 25 mm height Precise metric threads with industrial conformity The die is manufactured from HSS, which provides a reliable combination of toughness and wear resistance for thread generation. Conformity with DIN EN 22568 and the metric thread reference DIN 13 ensures that the cut threads meet recognised industrial tolerances and are interchangeable with standard components. This standard compliance reduces scrap rates and simplifies quality assurance in serial production and repair environments, while the specified tolerance 6g delivers a predictable fit for mating parts. Engineered for demanding steel applications Engineers will value that the tool is specified for machining steel up to approx. 800 N/mm² tensile strength; this means the die is suitable for common structural and engineering steels encountered in maintenance and production. The closed pre-slit Form B design provides dimensional stability during cutting, so the thread profile is held precisely and distortion is minimised. The result is consistent thread quality across batches, which supports efficient assembly and long-term component reliability. Practical operation and service reliability in the workshop With a 25 mm height, the die offers sufficient engagement for stable hand or machine use while remaining compact for general workshop tooling. The pre-slit feature aids chip control without compromising the rigidity needed for accurate thread form. Because the cutting material is HSS, the component achieves a favourable balance between service life and maintenance effort; regular inspection and correct mounting in the appropriate holder will keep performance consistent, making the tool a dependable element of a toolroom or maintenance kit. Where this die delivers value The die is particularly useful for toolrooms, maintenance departments and small-scale production where metric ISO threads must be reproduced reliably. Its compliance with industry standards supports compatibility with bolts and nuts produced to the same norms, streamlining assembly operations. The compact construction and recognised thread tolerance make the die a practical choice for repair work, on-site thread restoration in components and precision small-batch manufacture. For order placement or technical advice on the TECWERK Round die in M36×4 mm, contact Metav Werkzeuge – Metav’s specialists will confirm specification, compatibility and supply directly from Emmerich; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical Data Article number: 2000867743NW Description: Round die M36×4 mm, Form B, HSS, tolerance 6g, TECWERK Brand: TECWERK Packaging unit: 1 Facts Thread size: M36×4 mm Pitch: 4 mm Tolerance: 6g Height: 25 mm Material suitability: steel up to approx. 800 N/mm² Special features Cutting material: HSS Standard: DIN EN 22568 Metric ISO thread: DIN 13 Design: closed, pre-slit Form B FAQ What thread profile does the die produce? The die produces a metric ISO M36×4 mm external thread with tolerance 6g, matching the specifications stated for the TECWERK round die (SKU 2000867743NW). Which materials can be machined with this die? The TECWERK die is designed for use on steel up to approx. 800 N/mm² tensile strength; the HSS construction supports durability when cutting such steels. What is the advantage of Form B and the closed pre-slit design? Form B with a closed pre-slit maintains greater stability of the die body during cutting; the pre-slit facilitates chip clearance while preserving the rigidity needed for accurate thread form. Is the die compliant with recognised standards? Yes, the tool conforms to DIN EN 22568 and follows the metric ISO threading reference DIN 13, ensuring compatibility with standard fasteners and interchangeability in industrial applications. For which workshop tasks is this die particularly suitable? The die is well suited for toolroom use, maintenance and repair work, and small-series production where reliable metric external threads and standard conformity are required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of precise metric thread cutting with the combination of HSS‑E cutting material and a 6g tolerance for reliable M3 x 0.5 production; order directly via Metav Werkzeuge or consult our specialists for application advice. Threading die Form B M3 x 0.5 mm HSS‑E 6g – TECWERK Threading die Form B M3 x 0.5 mm HSS‑E 6g – TECWERK is a robust metric die designed for cutting M3 x 0.5 threads in demanding materials, offering consistent tolerance and DIN‑compliant thread geometry. HSS‑E for high red hardness and wear resistance Metric ISO thread M3 x 0.5 mm, tolerance 6g Suitable for heat‑ and acid‑resistant steels Closed, pre‑slit Form B for stable cutting Precision threading with reliable tolerances The TECWERK threading die is engineered to deliver consistent M3 x 0.5 mm metric threads with a 6g tolerance, complying with DIN EN 22568 standards. This level of accuracy reduces the need for downstream fitting and rework, supporting efficient production flow in small‑batch and repair settings. The use of HSS‑E (high‑speed steel with cobalt) ensures improved performance at elevated temperatures and better wear resistance compared with standard HSS, which translates to longer service life when machining tough alloys. The clearly defined tolerance class aids process planning and quality documentation, providing a verifiable basis for procurement and inspection. Built for difficult‑to‑machine and high‑strength materials Designed specifically for demanding applications, the die is suitable for heat‑, rust‑ and acid‑resistant steels and special alloys up to approx. 1200 N/mm² tensile strength. This capability makes it a practical choice where standard tools fail early or require frequent replacement. By selecting a tool with the right cutting material and geometry, workshops achieve fewer tool changes and greater uptime. The material compatibility broadens the die’s usability across maintenance, fabrication and precision engineering tasks, offering a rational cost‑benefit through lower consumable turnover and more predictable component acceptance rates. Stable cutting behaviour and chip control The closed, pre‑slit Form B construction provides a compact, stiff cutting profile that promotes stable engagement with the workpiece and controlled chip formation. For metric ISO threads produced to DIN 13 specifications, this form factor helps maintain thread geometry under load and reduces the tendency for die walk or wobble in handheld or low‑rigidity setups. The die’s 5 mm height supports secure seating in standard die holders and fixtures, simplifying integration into existing tooling arrangements and reducing setup time for repeat jobs. Practical handling and workshop benefits Manufactured from HSS‑Co (HSS‑E), the tool combines the toughness of high‑speed steel with enhanced red hardness from cobalt alloying, aiding performance at higher cutting speeds or where heat generation is elevated. The compact design and metric form make it straightforward to store and replace within a tool cabinet, while compatibility with common die holders ensures minimal additional investment. For users focused on product reliability and operational efficiency, the die contributes to reproducible thread quality and reduced scrap rates, aligning with the Metav principle of democratising precision for every workshop. For technical advice on material suitability or to source this TECWERK M3 x 0.5 mm threading die directly, contact Metav Werkzeuge at info@metav-werkzeuge.com or call +49 2822 7131930 — assistance from our specialists is available to match the tool to the application. Technical data Article number: 2000867840NW Manufacturer: TECWERK Product: Threading die Form B M3 x 0.5 mm HSS‑E 6g Packaging unit: 1 Specifications Thread: M3 x 0.5 mm Tolerance: 6g Height: 5 mm Material strength capability: up to 1200 N/mm² Standard: DIN EN 22568 Special features Cutting material: HSS‑E (HSS‑Co) Form: B, closed, pre‑slit Metric ISO thread according to DIN 13 For heat‑, rust‑ and acid‑resistant steels and special alloys Type: VA FAQ What materials can this die machine? The TECWERK threading die is suitable for heat‑, rust‑ and acid‑resistant steels and special alloys, and is specified for materials up to about 1200 N/mm² tensile strength. Is this die compliant with recognised standards? Yes, the die’s thread geometry and production align with DIN EN 22568 and metric ISO thread practices (DIN 13) for M3 x 0.5 mm threads. What does HSS‑E mean for tool life? HSS‑E (high‑speed steel with cobalt) provides improved red hardness and wear resistance compared with standard HSS, which helps the die maintain cutting performance over longer runs. Can the die be used in standard holders? The Form B die with a 5 mm height is compatible with common die holders designed for metric dies, simplifying replacement and setup in existing tooling. Does the product include coating information? The supplied data specifies HSS‑E as the cutting material; no additional coating was indicated in the provided information. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from the combination of HSS construction, DIN EN 22568 conformity and a closed, pre-slotted Form B for dependable metric M3x0.5 thread cutting; order the threading die directly via Metav Werkzeuge or consult our specialists for application advice. Threading die Form B M3x0.5 HSS 6g – TECWERK Threading die Form B M3x0.5 HSS 6g – TECWERK is a compact tool for cutting metric ISO threads in medium-strength steels, designed for repeatable results in workshop and production settings HSS material, DIN EN 22568 compliant Closed, pre-slotted Form B for improved chip control Metric ISO thread M3x0.5 with tolerance field 6g Consistent thread accuracy for production use The primary advantage of this tool lies in its adherence to DIN EN 22568, which underpins reproducible thread geometry and fit. The M3x0.5 specification combined with tolerance field 6g ensures that external threads meet established assembly tolerances, reducing mismatches and subsequent rework. For technical teams seeking reliable interchangeability, the standardised specification removes uncertainty and supports efficient quality control procedures. Robust material and form for extended service life Made from HSS, the die provides high hardness and thermal stability during cutting operations, which translates into longer tool life under typical workshop conditions. The closed, pre-slotted Form B improves chip evacuation and maintains cutting edge stability, particularly when machining steels up to approx. 800 N/mm² tensile strength. This construction minimises the frequency of tool changes and contributes to lower total operating costs through reduced downtime. Practical handling and process integration With a nominal height of 5 mm and designed for metric ISO threads to DIN 13, the die integrates readily into common die stocks and thread-cutting fixtures. The compact format and standardised dimensions support quick set-up and predictable results when paired with appropriate lubrication and moderate cutting feeds. For teams optimising workflow, the combination of material choice and form factor simplifies maintenance planning and inventory management. For dependable workshop threading with TECWERK quality, order this HSS Form B M3x0.5 threading die via Metav Werkzeuge or contact our specialists at info@metav-werkzeuge.com / +49 2822 7131930 for tailored technical guidance Technical data Article number: 2000867733NW Product label: Schneideisen Form B M3x0,5mm HSS 6g TECWERK Packaging unit: 1 Facts Thread: M3 x 0.5 Tolerance field: 6g Height: 5 mm Suitable for steels up to approx. 800 N/mm² tensile strength Special features Material: HSS Form: B (closed, pre-slotted) Standard: DIN EN 22568 Thread form: Metric ISO thread to DIN 13 FAQ What materials can this die machine? The TECWERK threading die is suitable for cutting external metric threads in steels up to approx. 800 N/mm² tensile strength and is manufactured from HSS for durability. Is the thread tolerance suitable for standard assemblies? Yes, the M3x0.5 die is produced for tolerance field 6g, providing compatibility with common mating components that conform to ISO metric thread tolerances. What does Form B mean and why is it useful? Form B denotes a closed, pre-slotted die profile; this improves chip control and cutting stability compared with open designs, particularly when working with medium-strength steels. Which standard governs this tool’s geometry? Thread form and manufacturing conform to DIN EN 22568, ensuring standardised thread geometry and interchangeability in industrial applications. Can the die be used with standard die stocks? Yes, with a height of 5 mm and standard metric dimensions, the die fits conventional die stocks and thread-cutting fixtures commonly used in workshops. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a robust, high-speed steel construction and a closed, pre-slotted Form B design for reliable external thread cutting in workshop environments; order the round die directly via Metav Werkzeuge or consult our specialists for application advice. Round die Form B M4×0.7 HSS, tolerance 6g — TECWERK A round die Form B M4×0.7 HSS 6g TECWERK designed for cutting external metric ISO threads in steels up to approximately 800 N/mm², combining a compact 5 mm height with DIN EN 22568 conformity. HSS cutting material for durability Metric ISO thread M4×0.7, tolerance 6g Closed, pre-slotted Form B for stability Suitable for steels up to 800 N/mm² tensile Consistent thread quality for production use The die’s HSS construction and conformity to DIN EN 22568 ensure consistent thread quality even under repeated use. The combination of hardened high-speed steel and the closed, pre-slotted Form B geometry reduces vibration and radial run-out during cutting, which directly improves dimensional repeatability and surface finish of the external threads. For production-oriented workshops, this translates into fewer reworks and a steadier process yield when machining metric ISO threads. Predictable performance on engineering steels Designed for materials with tensile strengths up to 800 N/mm², the tool handles a broad range of common engineering steels without premature wear. The tolerance 6g specification gives a clear fit class for external threads and supports reproducible mating with standard internal threads. Because the die is pre-slotted, swarf evacuation is improved compared with fully closed dies, offering a balance between strength and chip control that benefits both manual and machine-assisted threading operations. Compact form factor with straightforward handling With a height of 5 mm and a compact circular profile, the die integrates easily into existing die stocks and holders. The modest size aids accessibility in confined workspaces and simplifies tool changeover in set-ups that require frequent thread sizes. Its metric ISO thread format follows DIN 13 standards, so interchangeability with conventional tooling and fasteners is straightforward, reducing procurement complexity for maintenance and production teams. Clear technical standards and workshop reliability The tool’s adherence to recognised standards and use of HSS cutting material provide a reliable baseline for planning tooling life and maintenance intervals. The Form B design contributes to enhanced stability during thread cutting, which is especially valuable in repetitive tasks where maintaining thread geometry is crucial. For workshops looking to centralise tool sourcing, this die complements a standardised tooling inventory and supports consistent assembly outcomes. Contact Metav Werkzeuge for specific application guidance, stock availability or to discuss compatible holders and accessories — Metav Werkzeuge is ready to advise from Emmerich with transparent supply and reliable delivery Technical Data Article number: 2000867734NW Manufacturer: TECWERK Packaging unit: 1 Facts Thread size: M4×0.7 Tolerance: 6g Height: 5 mm Material strength capability: up to 800 N/mm² Standard: DIN EN 22568 Special features Cutting material: HSS Form: B Design: closed, pre-slotted Thread standard: metric ISO thread (DIN 13) FAQ What materials can this die machine this die reliably cut? This TECWERK round die is specified for steels up to approximately 800 N/mm² tensile strength and is suitable for typical engineering steel applications within that range. Is the thread tolerance suitable for standard bolt fits? Yes, the die produces an external thread with tolerance 6g, compatible with standard internal threads and commonly used fit classes for general assembly. Can the die be used in a machine holder or is it for hand use only? The compact Form B die is compatible with standard die holders and can be used both manually and in appropriate machine-assisted holders, subject to the holder’s specifications. How does the pre-slotted design affect performance? The pre-slotted configuration improves chip evacuation while maintaining structural integrity, offering a compromise between fully open and closed designs for cleaner cuts and reduced jamming. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Combining HSS‑E cutting material with DIN‑standard accuracy and tolerance 6g, this M4 x 0.7 threading die delivers durable, precise external threads in high‑strength alloys. Order the threading die directly via Metav Werkzeuge or consult their experts for application guidance. TECWERK Threading Die M4 x 0.7 mm, Form B (HSS‑E, 6g) A TECWERK Threading Die M4 x 0.7 mm designed for cutting precise metric external threads in stainless and high‑strength alloys HSS‑E high‑cobalt cutting material Metric ISO threads to DIN 13, tolerance 6g Suitable for stainless and acid‑resistant steels Closed, slotted Form B; 5 mm height Reliable threading for demanding materials The die is manufactured from HSS‑E (high‑cobalt high‑speed steel), a cutting material chosen for its improved heat resistance and wear behaviour when machining difficult materials. That composition supports consistent cutting performance in high‑strength alloys and steels with tensile strengths up to 1200 N/mm², reducing tool wear and minimising rework. The robust material selection translates into longer intervals between tool changes and steadier process output in small‑batch and repair environments. Consistency with industrial tolerances and standards Engineered to the metric ISO specification and DIN 13, the tool produces external threads within tolerance 6g, ensuring reliable fit and interchangeability in assembly operations. The defined tolerance class helps avoid thread play or excessive tightness, which in turn reduces scrap rates and the need for trial‑and‑error adjustments. For mechanical assemblies where repeatability matters, conformity to these standards delivers measurable process stability and predictable mating behaviour. Practical form and chip control for workshop use The closed, slotted Form B offers a compact geometry with integrated slots for chip evacuation, while the modest 5 mm height provides a stable cutting edge in a small envelope. This combination suits work with fixed die holders or hand‑held stocks and aids in maintaining concentricity during the cut. Correct use of cutting fluid and steady feed rates improves surface finish and extends tool life, making the tool a pragmatic choice for maintenance tasks and on‑bench thread repairs. Durable design for efficient production By combining a corrosion‑ and heat‑resistant substrate with a compact, workshop‑oriented shape, the die supports efficient throughput and predictable maintenance cycles. The solid construction reduces downtime associated with frequent replacements and contributes to lower total operating costs over time. For operations requiring dependable external threads without complex setup, this die presents a practical balance of precision, longevity and ease of handling. Contact Metav Werkzeuge for tailored application advice and to secure availability of the TECWERK M4 x 0.7 mm threading die for workshop use Technical Data Article number: 2000867841NW Designation: Threading die, Form B, M4 x 0.7 mm, HSS‑E, tolerance 6g, TECWERK Manufacturer: TECWERK Packaging unit: 1 Core data Thread size: M4 x 0.7 mm Height: 5 mm Tolerance class: 6g Maximum material tensile strength: 1200 N/mm² Special features HSS‑Co (HSS‑E) cutting material DIN EN 22568 Form B, closed and slotted Typ VA, metric ISO thread DIN 13 Suitable for stainless, heat‑ and acid‑resistant steels and special alloys FAQ Which materials can be machined with this threading die? The TECWERK Threading Die M4 x 0.7 mm (HSS‑E) is suitable for stainless, heat‑ and acid‑resistant steels, special alloys and steels up to approximately 1200 N/mm² tensile strength. What does the tolerance 6g indicate for external threads? Tolerance 6g denotes the standard external thread tolerance for metric threads under DIN/ISO, providing a reliable fit for general industrial applications and ensuring interchangeability with corresponding internal threads. Does the die conform to recognised standards? Yes, the tool is manufactured to metric ISO specifications and references DIN 13, which governs dimensional and tolerance requirements for metric screw threads. Can this die be used with a standard die stock or holder? The closed, slotted Form B is designed for use with conventional die holders or stocks; correct clamping and the use of cutting fluid are recommended to ensure thread quality and to extend tool life. How should the die be maintained after use? Remove chips, apply a light protective oil and store the die dry. Occasional inspection for wear and keeping cutting edges free from built‑up material will preserve performance. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combining HSS durability, precise M4×0.7 metric threading and a left‑hand cutting orientation, this Form B closed pre‑slit die delivers reliable thread production in steels up to approx. 800 N/mm²; order the threading die directly via Metav Werkzeuge or consult our specialists if application advice is required. TECWERK Threading Die Form B M4×0.7 HSS (left‑hand, 6g) A left‑hand TECWERK threading die Form B M4×0.7 for cutting metric ISO threads in steel components and maintenance tasks HSS material for durable cutting life Metric ISO M4 × 0.7 thread form 6g Left‑hand cutting for reverse-thread applications Closed, pre‑slit Form B for clean thread finish Consistent metric threads with industrial tolerance control The tool is designed to cut M4×0.7 metric ISO threads to DIN 13 with a 6g tolerance field, providing a predictable external thread fit for assembly and repair operations. Manufactured from HSS, the die sustains its edge geometry during repeated use, which reduces the need for early replacement and supports steady cycle times. For engineers and workshop managers, the measurable specification of 6g and compliance with DIN standards translates into fewer rejects and simpler quality control. Closed Form B geometry for clean results and stable handling The Form B closed design, supplied in a closed, pre‑slit construction, concentrates the cutting action and helps produce a consistent flank form with lower burr formation. With a nominal height of 5 mm, the die provides adequate contact surface for stable engagement in a holder while limiting material buildup. This geometry simplifies rework: parts leave the threading operation ready for assembly or finishing, which reduces downstream corrective work and improves overall process reliability. Left‑hand cutting and material capability for specialised tasks Specifically manufactured as a left‑hand cutting tool, this die suits reverse-thread applications, maintenance work on assemblies with counter-rotating fastenings, and repair scenarios where reversing thread direction is required. The cutting material and construction enable machining in steels up to approx. 800 N/mm² tensile strength, balancing toughness with wear resistance. For production technicians and toolroom staff, the combination of HSS and standardised thread form increases uptime and ensures repeatable results across batches. For precise left‑hand thread production, contact Metav Werkzeuge to request this TECWERK Form B threading die (SKU 2000867442NW) and discuss suitability for specific applications—Metav Werkzeuge offers application advice and reliable supply from Emmerich Technical data Article number: 2000867442NW Manufacturer: TECWERK Packaging unit: 1 Facts Thread: M4×0.7 (metric ISO) Height: 5 mm Tolerance: 6g Suitable for steels up to approx. 800 N/mm² tensile strength Special features Material: HSS Standard: DIN EN 22568 Form: B, closed pre‑slit Cutting direction: left‑hand Thread standard: DIN 13 FAQ What thread form and tolerance does the die produce? The die produces metric ISO threads in M4×0.7 to DIN 13 with a 6g tolerance field, suitable for standard external thread fits. Is this tool suitable for hardened steels? The TECWERK threading die is intended for use in steels up to approx. 800 N/mm² tensile strength; for higher hardness levels specialised tools should be considered. Why choose a closed, pre‑slit Form B die? A closed, pre‑slit Form B die gives a cleaner thread finish and more stable cutting action, reducing burrs and simplifying subsequent assembly operations. Can this die produce left‑hand threads reliably? Yes, the die is manufactured as a left‑hand cutting tool specifically for reverse-thread applications and maintenance tasks requiring counter‑direction threads. Which material is the die made from and what does that mean for durability? Constructed from HSS, the die combines toughness and wear resistance for prolonged cutting life and consistent thread quality. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a compact, high‑performance HSS‑E cutting tool that combines wear resistance and precision thread control; the closed, pre‑slit Form B design ensures consistent thread profiles in hard‑to‑machine and stainless steels — order directly via Metav Werkzeuge or request advice from the consultants in Emmerich. Threading die Form B M5×0.8 HSS‑E 6g, TECWERK — Closed pre‑slit die for hard materials A Threading die Form B M5×0.8 HSS‑E 6g designed for cutting metric ISO threads in demanding materials where dimensional accuracy and tool life are essential HSS‑E with cobalt for enhanced wear resistance Metric ISO thread M5×0.8, tolerance 6g Closed, pre‑slit Form B for precise thread profile Suitable for stainless and heat‑resistant steels Reliable cutting performance for high‑strength materials The die is manufactured from HSS‑E (cobalt‑alloyed high‑speed steel) in accordance with DIN EN 22568, providing superior hot hardness and abrasion resistance compared with conventional high‑speed steels. This material choice is particularly beneficial when machining stainless, heat‑ and acid‑resistant steels and special alloys, where elevated temperatures and abrasive wear are frequent. The tool is specified for use in steels with tensile strength up to 1200 N/mm², which supports operations on tougher grades without premature loss of cutting geometry. Such properties translate into fewer tool changes and more stable production cycles. Accurate thread form with controlled tolerance and profile The closed, pre‑slit Form B construction secures the full thread profile during cutting while the pre‑slit feature provides limited springing for chip evacuation and slight diameter variation. This combination helps to achieve the specified tolerance field 6g for an M5×0.8 metric ISO thread, reducing the likelihood of rework or assembly fit issues. Conformity to DIN 13 metric thread standards is maintained, so threads produced with this die integrate reliably into standardised assemblies. The modest 7 mm height ensures compatibility with compact die holders and supports fine axial control during manual or light‑machine applications. Durability, handling and application advantages Due to the cobalt‑enriched cutting material and robust design, the die offers a balance of longevity and consistent cutting geometry that benefits batch production and maintenance tasks alike. The closed construction protects the cutting edges and helps maintain thread quality over multiple uses; the pre‑slit arrangement reduces clogging risk when working with sticky or gummy materials. Where process reliability matters, these attributes contribute to predictable uptime and lower scrap rates. For specification clarifications or process recommendations, Metav’s consultants are available to support selection and integration into existing tooling layouts. For procurement of TECWERK threading dies or tailored technical advice, contact Metav Werkzeuge in Emmerich for fast, expert support and dependable delivery Technical data Article number: 2000867842NW Designation: Threading die Form B M5×0.8 HSS‑E 6g, TECWERK Brand: TECWERK Packaging unit: 1 Data Thread size: M5×0.8 Tolerance field: 6g Height: 7 mm Material: HSS‑E (cobalt) Standard: DIN EN 22568; DIN 13 Application tensile strength: up to 1200 N/mm² Design / Special features Form: B Type: VA Closed, pre‑slit design For difficult‑to‑machine, stainless and heat‑resistant steels Suitable for special alloys and steels up to 1200 N/mm² FAQ What materials can be machined with this die? The Threading die Form B M5×0.8 HSS‑E 6g (TECWERK, SKU 2000867842NW) is intended for stainless, heat‑ and acid‑resistant steels as well as many special alloys and steels with tensile strengths up to 1200 N/mm². Does the die meet metric standards for interchangeability? Yes, the die is produced to metric ISO thread specifications and references DIN 13, delivering a 6g tolerance suitable for standardised assembly fits. What advantage does HSS‑E offer compared with standard HSS? HSS‑E contains cobalt, which enhances hot hardness and wear resistance; this increases tool life and performance when cutting tougher or heat‑generating materials. How does the closed, pre‑slit Form B affect thread quality? The closed design ensures a complete thread profile while the pre‑slit feature allows limited flexing and improved chip clearance, supporting consistent tolerance control and fewer machining interruptions. Is this die compatible with standard die holders? The 7 mm height and Form B geometry are compatible with common compact die holders intended for metric threading operations; holder compatibility should be confirmed against specific toolholder dimensions. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of robust HSS cutting performance, DIN EN 22568 compliance and a 6g tolerance for reliable external threads; order the TECWERK round die directly via Metav Werkzeuge or ask our consultants if needed. Round die Form B M5×0.8 mm HSS (6g) — TECWERK a Round die Form B M5×0.8 mm HSS (6g) for cutting external metric ISO threads in steels up to approximately 800 N/mm² HSS construction for durable cutting Metric ISO thread to DIN 13 conformity Tolerance field 6g for consistent fits Closed, pre-slit Form B; 7 mm height Accurate metric threads that reduce rework and scrap The TECWERK round die Form B M5×0.8 mm HSS (6g) is designed for consistent production of external metric threads to DIN EN 22568 and DIN 13 specifications. The combination of high-speed steel and a defined 6g tolerance field delivers repeatable thread geometry, which reduces the need for rework and minimises scrap rates on batch work. Because the tool is intended for steels up to ~800 N/mm², it is suited to common workshop and light industrial applications; the standard conforms to recognised industrial norms for interchangeability and quality assurance. Durable design for workshop and machine use Constructed from HSS, the die offers good wear resistance and edge retention under moderate cutting stresses. The closed, pre-slit Form B makes thread engagement stable while enabling straightforward starting on shafts; the 7 mm height supports a sufficient thread length for secure assembly. This design is suitable for use in die stocks or automatic die holders and is robust enough for repetitive tasks, so downtimes for replacement are reduced. The material choice and form balance tool life with predictable cutting behaviour, improving overall process reliability. Practical integration into supply and tooling systems The metric M5×0.8 mm specification and industrial conformity simplify inventory management and allow direct replacement of worn items without special adaptation. As part of a standardised tooling set, the die supports efficient workflow planning and predictable output quality. Metav’s sourcing approach provides a transparent supply chain from Emmerich, combining a wide product range with expert selection; this supports steady production supply and reduces procurement complexity for workshops and small manufacturers seeking reliable precision tools. For technical advice or to arrange supply of the TECWERK round die, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss specifications and suitability for specific applications. Technical data SKU: 2000867735NW Label: Schneideisen Form B M5x0,8mm HSS 6g TECWERK Manufacturer short: TECWERK Pack unit: 1 UID: 2000867735NW Facts Thread: M5×0.8 mm Tolerance field: 6g Standard: DIN EN 22568; DIN 13 (metric ISO thread) Height: 7 mm Material suitability: steels up to ≈ 800 N/mm² Special features Material: HSS Form: B (closed, pre-slit) Intended use: external thread cutting Design: compact, workshop and machine-compatible FAQ What materials can be machined with this die? The TECWERK round die is specified for use in steels up to approximately 800 N/mm² tensile strength; the HSS cutting material provides the necessary wear resistance for these applications. What does the 6g tolerance mean for assembly? A 6g tolerance field indicates a general-purpose external thread fit under ISO metric standards, offering reliable mating with corresponding internal threads and consistent clearance for assembly. Is this die compatible with standard die stocks? Yes, the closed, pre-slit Form B geometry and standard M5×0.8 mm sizing make the die compatible with common die holders and stocks used in workshops. How does DIN EN 22568 affect performance? Compliance with DIN EN 22568 ensures that the die meets established dimensional and functional requirements for metric thread production, which supports interchangeability and predictable part quality. Can the die be used for production batches? The HSS construction and stable Form B design are suitable for repetitive tasks in small-batch production, providing consistent thread quality and reduced downtime due to tool wear. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of the robust combination of HSS tooling and precise 6g tolerance for consistently accurate left‑hand threads; the closed, pre‑slit Form B design reduces rework and extends service intervals. Order the cutting die directly via Metav Werkzeuge or consult our specialists for integration advice. TECWERK cutting die M5 x 0.8, Form B (HSS, left‑hand) A cutting die M5 x 0.8 Form B for producing left‑hand metric ISO threads in workshop and maintenance environments, suitable for steels up to approx. 800 N/mm² HSS high‑speed steel for wear resistance Metric ISO thread M5 x 0.8, tolerance 6g Left‑hand cutting, closed pre‑slit Form B Suitable for steels up to circa 800 N/mm² Consistent thread quality for serial production The TECWERK cutting die M5 x 0.8 is engineered to deliver reproducible results in repetitive operations. Made from HSS and manufactured to DIN EN 22568, the tool produces metric ISO threads with a 6g tolerance, ensuring parts meet standardised fit requirements. For production planners this translates into fewer rejects and predictable interchangeability. The technical specification of the thread (M5 x 0.8) and the standard compliance support quality control and simplify documentation across procurement and inspection processes. Robust geometry that reduces downtime The closed, pre‑slit Form B geometry and a nominal height of 7 mm combine to improve chip control and increase tool life under typical workshop stresses. The pre‑slit design provides controlled chip breaking and easier ejection, which helps avoid thread damage when cutting in tougher materials. Because the die is specified for steels up to approx. 800 N/mm², maintenance teams can rely on the component for repair work and small‑batch production without frequent replacement, improving overall equipment effectiveness and reducing maintenance frequency. Practical integration and application benefits The left‑hand cutting orientation is ideal where left‑hand threads are required for mechanical assemblies or for repair tasks on components already manufactured with reversed threads. The compact form and recognised threading standard mean the die fits common die holders and thread‑cutting fixtures, enabling quick set‑up and minimal changeover time. For purchasing managers and workshop supervisors, the combination of HSS construction and standard conformity offers a cost‑effective balance of durability and interchangeability, supporting efficient stock management and reliable on‑the‑job performance. For technical ordering advice or specification checks on TECWERK threading tools, contact Metav Werkzeuge for dependable supply from Emmerich and expert assistance on application suitability. Technical data Article number: 2000867443NW Designation: Cutting die M5 x 0.8, Form B, left‑hand — TECWERK Facts Thread: M5 x 0.8 (metric ISO, DIN 13) Tolerance: 6g Height: 7 mm Material: HSS (high‑speed steel) Max material strength: approx. 800 N/mm² Special features Form: B, closed, pre‑slit Cutting direction: left‑hand Standard: DIN EN 22568 Application: metric ISO thread cutting Pack size: 1 FAQ How does Form B differ from other die forms? Form B is a closed die design with a pre‑slit section that combines precise thread flanks with controlled chip breaking; this makes the TECWERK die particularly suitable for standardised metric ISO thread production where chip control and surface finish are important. Can this die be used on hardened or alloyed steels? The die is specified for steels up to approx. 800 N/mm²; use on substantially harder or specially alloyed steels may accelerate wear and is not recommended without testing. Is the thread compatible with standard die holders? Yes, the die conforms to metric ISO threading conventions and can be mounted in commonly used die holders and fixtures for thread cutting and repair. Does left‑hand cutting affect machining direction? Left‑hand cutting produces threads with reverse orientation; users should ensure the application requires a left‑hand thread and select compatible holders and lathes or manual turning direction accordingly. What maintenance extends the life of the die? Regular cleaning of chips, appropriate cutting lubrication and avoiding excessive feed rates will prolong service life and maintain consistent thread quality when using the TECWERK die. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a robust, DIN‑compliant cutting solution that combines HSS durability with a precise tolerance 6g for reliable assembly. The die’s closed, pre‑slit Form B construction and 7 mm height ensure clean chip control and repeatable results in steels up to 800 N/mm² — order directly via Metav Werkzeuge or request tailored advice from our consultants. Die Form B M6×1 mm HSS 6g by TECWERK — metric ISO cutting die, Form B, HSS The Die Form B M6×1 mm HSS 6g is a metric ISO thread‑cutting die designed for machining M6×1 mm threads in steels up to approximately 800 N/mm² and manufactured to DIN standards for consistent industrial use. HSS construction, compliant with DIN EN 22568 Metric ISO thread M6×1 mm, DIN 13 Tolerance field 6g for consistent fit Closed, pre-slit Form B with 7 mm height Robust cutting performance for medium‑strength steels Manufactured from HSS and produced to DIN EN 22568, this tool delivers a balance of toughness and edge retention that suits serial workshop use and small production runs. The geometry is optimised for the M6×1 mm metric ISO thread, enabling efficient material removal in common structural and engineering steels. The construction supports consistent cutting behaviour, which reduces rework and contributes to a steady production flow — a decisive advantage where throughput and repeatability matter. Consistent assembly and fit through precise tolerances A clearly defined tolerance 6g provides predictable thread clearance for mating parts and reduces the need for trial adjustments during assembly. The die’s closed, pre‑slit Form B design helps maintain thread form under load and assists chip evacuation in manual or guided cutting operations. Together, these features support reliable interfacing with standard fasteners and simplify quality control routines that require repeatable dimensional outcomes. Durable design that keeps maintenance straightforward The use of HSS as the cutting material offers durable cutting edges and good resistance to chipping under typical workshop conditions. The die’s 7 mm height gives sufficient tooth engagement for stable thread formation while remaining compact for storage and handling. Regular inspection and standard sharpening practices extend service life; because the tool is produced to recognised standards, replacement and interoperability with existing tool holders remain straightforward. Practical application and workshop integration This die is suited to toolrooms, maintenance shops and small‑batch production where metric ISO threads are required in medium‑strength steels. The compact format allows use with conventional die stocks or machine adaptors when guided cutting is preferred. For specifications beyond the listed values or for guidance on pairing the die with holders and lubricants, technical advice is available from Metav’s specialists to ensure the tool matches the intended workflow and material mix. For precise metric threading with TECWERK dies, contact Metav Werkzeuge for ordering or technical guidance — eMail: info@metav-werkzeuge.com • Phone: +49 2822 7131930 Technical data Article number: 2000867736NW Name: Die Form B M6×1 mm HSS 6g TECWERK Manufacturer: TECWERK Packing unit: 1 Core data Thread: M6×1 mm (metric ISO) Tolerance: 6g Height: 7 mm Cutting material: HSS Reference standard: DIN EN 22568 Workpiece strength: steels up to approx. 800 N/mm² Special features Form: B (closed, pre‑slit) Metric ISO thread production, DIN 13 Designed for consistent thread fit and chip control FAQ What materials is this die suitable for? The die is specified for use in steels up to approx. 800 N/mm² and is manufactured to DIN EN 22568 for reliable performance in these materials. What does the tolerance 6g mean for assembly? Tolerance 6g indicates the thread class and expected clearance; the setting ensures consistent fits with standard mating bolts and reduces adjustment during assembly. Can the die be used with a hand die stock or machine holder? The die’s compact Form B geometry and 7 mm height make it compatible with common die stocks and guided holders typically used in workshops for manual or supported cutting. Is the cutting material suitable for frequent use and sharpening? Made from HSS, the die offers good edge life under normal workshop conditions and can be maintained with standard regrinding practices to extend service life. What standards and norms does the product comply with? Production is aligned with DIN EN 22568 and the thread form follows the metric ISO / DIN 13 specification to ensure interchangeability and quality. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the HSS‑Co cutting material and the precise M6×1, 6g metric ISO thread accuracy to ensure dependable, repeatable thread production; benefit from the closed, pre‑slit Form B for consistent chip control — order the TECWERK M6×1 HSS‑E die directly via Metav Werkzeuge or ask our consultants if needed TECWERK M6×1 HSS‑E Threading Die (Form B, 6g) A TECWERK M6×1 HSS‑E threading die (Form B) engineered for cutting metric ISO threads in hard‑to‑machine steels and corrosion‑resistant alloys HSS‑Co grade for high wear resistance Metric ISO thread M6×1, tolerance 6g Closed, pre‑slit Form B for consistent threads Suitable for stainless and special alloys Precision that reduces rework and inspection effort The use of HSS‑Co (HSS‑E) cutting steel, specified to DIN EN 22568, gives this circular die excellent wear resistance and thermal stability. That means threads are formed with consistent geometry and surface quality even when machining demanding materials, lowering the need for secondary finishing or scrap. The combination of a metric ISO thread profile with tolerance 6g provides a verifiable fit to mating parts; this translates into predictable assembly behaviour and reduced inspection cycles in production environments. Robust design for reliable thread cutting in tough materials The closed, pre‑slit Form B design balances cutting action and chip control: the pre‑slit geometry facilitates controlled chip formation while the closed contour supports accurate flank generation. With a height of 7 mm and the die made for special alloys and steels up to 1200 N/mm², the tool is suited to workshop and small‑batch industrial use where repeatability matters. The construction minimises deformation of the thread profile, which supports stable torque transfer and service life of the fastened joint. Efficient handling and practical shop benefits Owing to the cobalt‑alloyed HSS composition, the die tolerates elevated cutting temperatures and permits higher cutting speeds than plain HSS in comparable conditions, improving throughput on manual and semi‑automatic threading tasks. The Type VA characteristics ensure compatibility with standard die holders, while the compact design aids quick changeover. Reduced tool wear and consistent output contribute to lower total machining costs and a more efficient workflow, making this threading solution a pragmatic choice for professional workshops. Contact Metav Werkzeuge for tailored advice and to secure this TECWERK M6×1 HSS‑E threading die for dependable thread production; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data SKU: 2000867843NW Article name: Schneideisen Form B M6×1mm HSS‑E 6g TECWERK Manufacturer: TECWERK Facts Thread: M6×1 (metric ISO) Tolerance: 6g Standard: DIN EN 22568 Height: 7 mm Pack unit: 1 Tensile strength capability: up to 1200 N/mm² Materials & special features Cutting material: HSS‑Co (HSS‑E) Form: closed, pre‑slit Form B Type: VA Applications: hard‑to‑machine materials, stainless steels, heat‑ and acid‑resistant steels, special alloys Metric ISO thread DIN 13 compliant FAQ What thread form and tolerance does this die produce? The TECWERK M6×1 HSS‑E die produces a metric ISO thread M6×1 with a tolerance of 6g, suitable for standardised fits. Which materials can be machined with this die? This die is designed for stainless, heat‑ and acid‑resistant steels, special alloys and other hard‑to‑machine materials up to 1200 N/mm² tensile strength. What is the cutting material and why does it matter? The die is made from HSS‑Co (HSS‑E), a cobalt‑alloyed high‑speed steel that offers improved wear resistance and thermal stability compared with plain HSS. Is the die suitable for production use on powered machines? The construction and HSS‑Co composition allow higher cutting speeds than plain HSS, but suitability for powered threading depends on the specific machine and setup; adherence to machine manufacturer guidance is recommended. What does Form B, closed and pre‑slit, mean for chip control? A closed, pre‑slit Form B provides a stable thread profile while the pre‑slit zones improve chip evacuation and reduce jamming, supporting consistent thread quality. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of a high-speed steel construction combined with a closed Form B, pre-slit design for reliable chip control and consistent thread quality in metric applications; order the threading die directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Threading Die Form B M6×1, HSS, left-hand, tolerance 6g The TECWERK Threading Die Form B M6×1 is a left‑hand, high‑speed steel die for cutting metric ISO threads, designed for robust workshop and industrial use where reverse threads or repair work are required. HSS high-speed steel construction Left-hand cutting for reverse threads For metric ISO thread M6×1, tolerance 6g Suitable for steels up to approx. 800 N/mm² Reliable metric threads with industrial standards The die is manufactured to DIN EN 22568, ensuring consistent geometry for metric ISO threads. Made from HSS, the tool maintains cutting edge integrity under repeated use, which leads to dependable pitch accuracy and reduced rework. The specified tolerance 6g provides a tight fit for standard mating threads, helping to guarantee interchangeability in assemblies and repair tasks where conformity to standardised dimensions matters. Durable cutting performance and controlled chip evacuation Thanks to the closed, pre-slit Form B design and the left‑hand cutting orientation, the tool offers improved stability during thread cutting and better chip guidance compared with non-slit variants. The construction supports machining in steels up to approximately 800 N/mm², so wear resistance and heat management are optimised for typical maintenance and production environments. The die height of 7 mm contributes to secure clamping and uniform torque transmission during cutting. Versatile use across workshops and production lines This left‑hand die is suitable for reverse-thread applications, thread repair and maintenance operations in mechanical workshops and toolrooms. Its metric specification, compliant with DIN 13, allows integration into existing workflows with standard die stocks and holders. Ideal for maintenance technicians and manufacturing teams who require precise, repeatable thread creation without complex setup or specialised machines. Practical advantages that reduce downtime The tool’s HSS material and classic Form B geometry balance edge life and regrindability, making it a cost‑efficient option for frequent use. Because the die is pre-slit, chip breakage is facilitated, which reduces risk of jamming and minimises interruptions. The result is faster thread turnaround and fewer rejects, supporting continuous production flow and reliable maintenance schedules. For fast procurement or technical advice on the left‑hand M6×1 HSS threading die, contact Metav Werkzeuge in Emmerich — specialists are available via info@metav-werkzeuge.com or +49 2822 7131930 to assist with compatibility and ordering. Technical data Article number: 2000867444NW Product: TECWERK Threading Die Form B M6×1 left‑hand Packaging unit: 1 Facts Thread size: M6×1 Tolerance: 6g Material: HSS Standard: DIN EN 22568 Die height: 7 mm Suitable material strength: up to approx. 800 N/mm² Special features Form: B Cutting direction: left‑hand Design: closed, pre‑slit For metric ISO thread DIN 13 FAQ What thread form and tolerance does this die produce? The TECWERK threading die produces a metric ISO thread M6×1 with tolerance field 6g, compliant with DIN standards for interchangeable threads. Is the die suitable for cutting threads in hardened steel? The tool is made of HSS and specified for steels up to approx. 800 N/mm²; for higher hardness levels, a different grade or special tooling should be considered. Can this die be used for repair of existing reverse threads? Yes, the left‑hand cutting orientation and Form B design are suitable for re-cutting or repairing reverse threads in assemblies. Does the design help with chip control during threading? The closed, pre‑slit Form B promotes controlled chip breakage and evacuation, reducing the likelihood of jamming and improving process reliability. Is the die compatible with standard die stocks and holders? The die conforms to metric ISO and DIN specifications and is intended for use with standard holders designed for M6 dies. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Take advantage of the combination of HSS‑E cutting performance, a 6g tolerance for precise external threads and a closed Form B design for consistent chip control; order directly via Metav Werkzeuge or consult the team for application advice TECWERK round die Form B M8×1.25 mm HSS‑E, 6g tolerance The TECWERK round die Form B M8×1.25 mm HSS‑E 6g is a robust metric ISO thread cutting tool for external threads, developed for demanding and alloyed steels HSS‑Co grade (HSS‑E) for high heat resistance Metric ISO thread M8×1.25 mm, DIN 13 Tolerance field 6g for precise external threads Closed, pre‑slotted Form B; works to 1200 N/mm² Consistent thread accuracy for production use The closed, pre‑slotted Form B geometry ensures stable seating in a die stock and predictable chip formation, which contributes to uniform external threads across batches. The specified 6g tolerance corresponds to a tight tolerance field for external threads according to metric ISO practice; this reduces the need for post‑processing and minimises rejects in serial work. Where repeatability is essential, the combination of form and tolerance supports efficient quality control and reliable assembly behaviour. Material performance and thermal stability Made from HSS‑E (high‑speed steel with cobalt), the cutting material retains hardness at elevated temperatures and increases resistance to abrasive wear compared with standard HSS. This composition is indicated for machining stainless, heat‑ and acid‑resistant steels and special alloys, and is specified for steels up to 1200 N/mm² tensile strength. The cobalt alloying improves hot hardness and toughness, so tool life is extended under challenging cutting conditions and the rate of tool changeovers can be reduced. Ease of use and secure clamping in the die stock The die’s compact geometry and 9 mm height allow straightforward insertion into standard die holders while the closed, pre‑slotted design supports controlled chip evacuation and reduced risk of tool walk. The tool is compatible with metric ISO thread practice (per DIN EN 22568 and DIN 13), which simplifies tool selection and integration into existing tool kits. For manual or semi‑automatic rethreading tasks, the robust form reduces the likelihood of chatter and produces a clean thread flank finish suitable for assembly. Application scope and maintenance guidance This die is intended for hard‑to‑machine materials, including stainless steels, heat‑resistant and acid‑resistant grades as well as special alloys; such applications benefit from the HSS‑Co composition and the controlled cutting geometry. Routine inspection of flank wear and immediate cleaning of chips after use prolong service life; when wear becomes evident, replacement maintains dimensional accuracy without complex regrinding procedures. The tool’s standard compliance and defined tolerance class support traceable quality in production environments, making it a practical choice for workshops and industrial suppliers seeking dependable thread cutting results. For tailored selection advice or to reserve the TECWERK M8×1.25 mm round die with 6g tolerance, contact Metav Werkzeuge in Emmerich by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: 2000867844NW Manufacturer: TECWERK Item label: Round die Form B M8×1.25 mm HSS‑E 6g Facts Height: 9 mm Thread: M8×1.25 mm Tolerance field: 6g Strength capability: up to 1200 N/mm² Packaging unit: 1 Special features Material: HSS‑E (HSS‑Co) Standard: DIN EN 22568 Form: B — closed, pre‑slotted Metric ISO thread per DIN 13 Type: VA Application: hard‑to‑machine materials; stainless, heat‑ and acid‑resistant steels; special alloys FAQ What materials are suitable for this round die? The TECWERK round die Form B M8×1.25 mm HSS‑E 6g is suitable for stainless steels, heat‑resistant and acid‑resistant steels, special alloys and other hard‑to‑machine materials up to approximately 1200 N/mm² What does the 6g tolerance mean for external threads? A 6g tolerance indicates a standard external thread tolerance band for metric ISO threads; the TECWERK die produces threads within this field, ensuring consistent fit and interchangeability with corresponding internal threads Why is HSS‑E specified for this die? HSS‑E (HSS‑Co) offers improved hot hardness and wear resistance compared to standard HSS; in the TECWERK die this material choice enhances durability and cutting stability when machining tough alloys How does the closed, pre‑slotted Form B affect performance? The closed, pre‑slotted Form B design gives better axial stability and more controlled chip formation, which reduces the risk of tool bounce and promotes consistent thread geometry during use Which standards apply to the thread form and manufacture? The die is manufactured in line with DIN EN 22568 and produces metric ISO threads per DIN 13; SKU: 2000867844NW Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Combine durable HSS construction with precise metric ISO threading for reliable workshop performance; order the die directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK M8×1.25 Form B HSS Threading Die – 6g, DIN 13 A TECWERK M8×1.25 Form B HSS threading die engineered for cutting metric ISO threads in steels up to approximately 800 N/mm², ideal for precise repair and series production tasks HSS cutting material for durability Metric ISO threads to DIN 13, tolerance 6g Closed, pre-slit Form B design Suitable for steels up to 800 N/mm² Consistent metric threads for production reliability The die is manufactured to DIN EN 22568, providing conformity with established workshop standards. The M8×1.25 specification and tolerance 6g ensure that threads meet the dimensional requirements of ISO metric fasteners, reducing mismatches and rework. Using high-quality standards as a basis enables predictable interchangeability in assemblies and supports quality control processes in both small-batch and larger production environments. This technical consistency translates directly into fewer rejects and a steady production flow. Durable HSS body for extended service life Built from high-speed steel (HSS), the tool offers a robust cutting edge and resistance to wear under regular use. The Form B geometry, closed and pre-slit, balances cutting stability with controlled chip evacuation, which helps preserve cutting edges and maintain thread geometry over longer runs. For workshops processing medium-strength steels — up to about 800 N/mm² tensile strength — the material selection and construction deliver a favourable life-cycle performance, lowering downtime and tool change frequency. Practical design for straightforward integration With a compact 9 mm height and conventional metric profile, the component integrates into standard die holders and workshop procedures without requiring special adapters. The closed design supports reliable engagement with blanks and stock, while the pre-slit feature simplifies initial alignment and reduces the tendency to grab or miscut. These design choices mean that thread cutting can be carried out efficiently with hand-held die stocks or compatible fixtures, maintaining thread quality across multiple operations. Procurement and operational advantages for buyers Specifying a tooling solution that complies with recognised standards and employs HSS construction reduces uncertainty in supply chains and maintenance planning. The die’s conformity to DIN 13 metric thread forms supports spare-part interchangeability and simplifies procurement documentation. For decision-makers, the combination of defined tolerances, standard compliance and durable materials represents a clear cost-benefit: fewer interruptions, consistent part quality and straightforward replacement when required. For procurement guidance and to source this TECWERK HSS threading die through Metav Werkzeuge, please contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 and refer to SKU 2000867738NW Technical data Article number: 2000867738NW Manufacturer: TECWERK Packaging unit: 1 Data Thread size: M8×1.25 Standard: DIN EN 22568 Tolerance: 6g Height: 9 mm Suitable for steels up to approx. 800 N/mm² Special features Material: HSS (high-speed steel) Thread form: metric ISO to DIN 13 Design: closed, pre-slit Form B Cutting grade: Form B FAQ What materials can this die handle? The TECWERK M8×1.25 Form B HSS threading die is specified for use on steels up to approximately 800 N/mm² tensile strength and is optimised for common workshop steel grades. Is the thread compatible with ISO metric fasteners? Yes, the die cuts metric ISO threads to DIN 13 dimensions with a 6g tolerance suitable for standard ISO metric fasteners. What does Form B mean for performance? Form B denotes a closed, pre-slit design that provides stable engagement and improved control during threading, helping to maintain thread geometry and reduce tool wear. Can the die be used with hand-held die stocks? The compact construction and conventional thread profile allow the die to be used in standard die holders and fixtures commonly found in workshops. Which standard certifies the die’s manufacturing? Manufacture conforms to DIN EN 22568, ensuring adherence to recognised quality and dimensional standards for threading tools. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a durable HSS construction and a Form B closed, pre‑slotted design to produce consistent metric threads; the left‑hand cutting geometry and M8×1.25, tolerance 6g specification ensure reliable reverse-thread assemblies — order the tool directly via Metav Werkzeuge or consult the Metav team for application advice. TECWERK Round Die Form B M8×1.25mm HSS 6g, left‑hand The TECWERK Round Die Form B M8×1.25mm HSS 6g, left‑hand is a precision hand die for cutting metric ISO threads in medium‑strength steels and general workshop applications HSS cutting material for long tool life Form B: closed, pre-slotted design Metric ISO thread M8×1.25, tolerance 6g Left‑hand cutting for reverse threads Consistent metric threads for secure assemblies The primary advantage of this hand die lies in its specification for M8×1.25 threads with tolerance 6g, which supports repeatable fits in mating components. The adherence to DIN 13 for metric ISO threads means thread form and pitch conform to established engineering standards, reducing the need for subsequent rework. By selecting a tool defined to these tolerances, assembly reliability is improved and downstream inspection effort is reduced, making the process more predictable for small series and repair tasks. Durable HSS construction that reduces downtime Manufactured from HSS, the round die offers elevated wear resistance compared with standard carbon steel tooling; this durability translates into fewer tool changes and longer service intervals. The material choice allows the die to maintain sharp cutting edges when used on common workshop steels up to approx. 800 N/mm² tensile strength, ensuring consistent thread quality over many cycles. For maintenance, light lubrication and periodic inspection of the cutting surfaces are sufficient to preserve performance and extend tool life. Closed, pre‑slotted Form B improves chip control and thread quality The Form B geometry, described as closed and pre‑slotted, balances rigidity with controlled chip evacuation. The closed form supports accurate thread profile generation, while the slots relieve cutting forces and guide chips away from the cutting zone. This combination reduces the risk of galling and improves surface finish on the flank and root of the thread. For workshop operators, the result is fewer instances of re-cutting and cleaner assembly threads after tapping or die‑cutting. Left‑hand cutting and practical handling for diverse applications Left‑hand cutting orientation enables the production of reverse threads where required by design or repair tasks, matching assemblies with left‑handed fasteners. With a tool height of 9 mm, the die is compact enough for handheld use in vises and can be integrated into manual thread‑cutting workflows without specialised fixtures. The tool’s construction and metric ISO compliance make it suitable for maintenance, prototyping and small‑batch production in engineering or automotive workshops. For precision reverse threads, order the TECWERK round die via Metav Werkzeuge and request tailored application support from our consultants at Metav Werkzeuge for a seamless integration into workshop processes. Technical data Article number: 2000867445NW UID: 2000867445NW Manufacturer: TECWERK Facts Thread: M8×1.25 mm Tolerance: 6g Height: 9 mm Suitable for steels up to approx. 800 N/mm² Standard: DIN 13, DIN EN 22568 Special features Material: HSS Form: B (closed, pre‑slotted) Left‑hand cutting Metric ISO thread For use in manual threading operations FAQ What thread does this die produce and to which standard does it conform? The die produces an M8×1.25 metric ISO thread and conforms to DIN 13; the specification ensures compatibility with standard metric fasteners. Is the tool suitable for use on hardened steels? The TECWERK round die is specified for steels up to approx. 800 N/mm² tensile strength; it is not rated for high‑hardness, quenched components. How does the Form B design affect performance? Form B’s closed, pre‑slotted design provides rigidity for accurate thread form while the slots improve chip control, yielding cleaner threads and lower rework rates. Can the die cut left‑hand threads for reversing applications? Yes, the left‑hand cutting geometry is intended specifically for reverse‑threaded assemblies and repair tasks requiring left‑hand threads. What basic maintenance keeps the die performing? Regular light lubrication during use and inspection of the cutting edges will maintain cutting quality; replace the die if wear affects thread profile fidelity. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Robust HSS construction and DIN-compliant geometry ensure consistent metric fine threads; the closed, pre-slotted Form B with tolerance 6g provides reliable fits in general engineering. Order the die directly via Metav Werkzeuge or request advice from our consultants for application-specific guidance. TECWERK MF10 x 1.25 mm Threading Die, Form B — HSS, 6g The TECWERK MF10 x 1.25 mm threading die is a closed, pre-slotted tool for cutting metric fine external threads to DIN 13 MF and DIN EN 22568 standards, suitable for general engineering use. HSS cutting material, DIN EN 22568 Metric fine thread MF10 x 1.25 mm Tolerance field 6g for precise fits Suitable for steels up to ~800 N/mm² Precision cutting for repeatable external threads Built to industry standards, this threading die combines HSS cutting material with DIN-compliant geometry to deliver reproducible results on metric fine threads. The specification to DIN EN 22568 and DIN 13 MF means thread form and pitch conform to recognised tolerances, reducing rework and inspection time in production. The 6g tolerance field offers a reliable medium-fit class for general mechanical assemblies, which simplifies selection when standardised interfacing with bolts and components is required. Consistent performance on medium-strength steels Engineered for use on steels up to approximately 800 N/mm², the tool’s HSS composition balances hardness and toughness for stable cutting performance in workshop environments. The closed, pre-slotted Form B design produces full-profile threads while the pre-slotted relief assists chip control during cutting, lowering the risk of jamming when machining long runs or interrupted surfaces. This combination supports higher first-pass success rates and steady throughput on component batches. Seamless integration into workshop workflows Conforming to ISO metric fine-thread practice, the die fits common holders and thread-cutting fixtures used across maintenance and production shops. The modest height of 11 mm keeps the tool compact for use in confined setups and chaser holders. Specifying a DIN-based die streamlines procurement and quality assurance, while durable HSS construction extends service intervals compared with lower-grade materials, contributing to a predictable maintenance schedule for the tool crib. Practical guidance for reliable results For most applications, progressive engagement with adequate lubrication and controlled feeds will extend life and improve surface finish. The closed Form B requires attention to chip evacuation—use of suitable cutting fluid and periodic clearing of the pre-slot encourages uninterrupted cutting. The tool’s designation for metric fine threads means matched counterparts should be chosen with the same 6g class to secure the intended fit and function in assemblies. For application-specific recommendations or to purchase this TECWERK MF10 x 1.25 mm die from stock, contact Metav Werkzeuge for expert consultation and direct supply from Emmerich. Technical data Article number: 2000867764NW Designation: Threading die, Form B, metric fine MF10 x 1.25 mm, HSS, 6g Brand: TECWERK Facts Thread size: MF10 x 1.25 mm Tolerance: 6g Height: 11 mm Material: HSS Standard: DIN EN 22568, DIN 13 MF Suitable material strength: up to approx. 800 N/mm² Special features Closed, pre-slotted Form B For metric ISO fine threads Designed for external thread cutting Durable high-speed steel cutting material FAQ What materials can this die cut? The TECWERK MF10 x 1.25 mm die is specified for use on steels up to approximately 800 N/mm² and is suitable for general engineering steels. Is the thread form standardised? Yes, the tool conforms to DIN EN 22568 and DIN 13 MF, producing ISO metric fine-thread geometry for compatible mating parts. How does the pre-slotted Form B affect use? The pre-slot assists chip evacuation during cutting while the closed Form B yields a full-profile external thread; regular clearing of the slot and appropriate lubricant are recommended. Can the die be used in common holders? The die’s dimensions and form are compatible with standard die holders for external threading used in maintenance and production workshops. What tolerance does the die produce and what does that mean? The die produces a 6g tolerance field, a medium external thread fit commonly used in mechanical assemblies for reliable engagement with standard mating threads. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund