Take advantage of the combination of fast, reliable extraction and compatibility with common tap sizes to keep rework time to a minimum; the counter-rotation design and three-flute geometry protect the parent thread and simplify removal. Order the thread extractor crown directly via Metav Werkzeuge or ask our consultants if needed. TECWERK Thread Extractor Crown Type 3, Size 5 — for M10 / 3/8 in taps The Thread Extractor Crown Type 3 Size 5 for M10 / 3/8 in is a purpose-built extractor for removing broken taps by counter-rotation, ideal for maintenance and repair work in metalworking workshops Removes broken taps by reverse rotation For taps with three flutes, Type 3 Fits M10 and 3/8 inch taps Minimise downtime with controlled extraction The extractor crown uses a counter-rotation principle: by turning the tool against the original thread direction, the broken tap fragment is progressively disengaged and withdrawn. This method reduces the need for drilling out or re-tapping, which in turn lowers scrap rates and shortens repair cycles. The three-flute geometry is matched to common tap profiles and helps to bite the fragment reliably without excessive torque. For workshop managers and maintenance technicians, this translates into predictable, repeatable removal that supports continuous production. Preserves the parent thread and simplifies repair work Designed specifically for broken tap retrieval, the tool prioritises thread preservation over aggressive extraction. The Type 3 configuration is optimised for taps with three flutes, distributing extraction forces to avoid enlarging or damaging the tapped hole. Compared with improvised removal methods, the extractor crown reduces the risk of additional machining and the associated labour. The compact design suits confined spaces often found on assembled components, making it a practical addition to an industrial service kit. Clear compatibility and straightforward application Compatibility with M10 and 3/8 in taps is declared so selection is fast and unambiguous. The tool is intended for use on standard metric and imperial taps of the stated flute count; it performs best when the broken fragment retains enough of the original thread to allow the tool to engage. The operating principle is simple: engage the extractor, apply steady counter-rotation, and the fragment is backed out without excessive force. This straightforward technique makes the tool suitable for experienced machinists as well as skilled maintenance staff who need reliable, efficient extraction. For workshop reliability choose TECWERK extractor crowns — contact Metav Werkzeuge in Emmerich for purchasing or technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000867805NW Description: Thread extractor crown Type 3 Size 5 for M10 / 3/8 in (TECWERK) Packaging unit: 1 Manufacturer: TECWERK Facts Compatible thread sizes: M10; 3/8 in Type designation: 3 Flutes: 3 Size group: 5 Special features Removes broken taps by counter-rotation (turning against the thread) Designed for taps with three flutes Suitable for confined-space extraction applications FAQ How does the extractor crown remove a broken tap? The TECWERK thread extractor crown engages the fractured tap by its flutes and is turned in counter-rotation (opposite the thread direction) so the fragment is gradually pulled out while preserving the parent thread. Which tap sizes can be worked on with this tool? This extractor crown is specified for M10 and 3/8 in taps and is classified as Type 3, Size 5, making it suitable for the indicated metric and imperial dimensions. Is the tool suitable for taps with a different number of flutes? The tool is optimised for taps with three flutes; use on taps with a different flute count may reduce engagement reliability and is not recommended for consistent results. Will this method damage the original thread? When used correctly, the extractor crown reduces the risk of enlarging or stripping the parent thread compared with drilling or aggressive mechanical removal, as the extraction force is concentrated on the broken fragment. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a targeted solution for broken tap recovery: precise extraction by counter-rotation, compatibility with both metric (M12) and imperial (1/2 in) threads, and a design matched to 3‑flute tap geometries. Order the tool directly via Metav Werkzeuge or consult our advisors for application guidance. TECWERK Thread Extractor Type 3, Size 6 — for M12 / 1/2 in taps The TECWERK Thread Extractor Type 3, Size 6 is a specialist removal tool for extracting fractured taps from threaded holes, engineered for 3‑flute tap profiles and both metric and imperial sizes For extracting broken taps by counter-rotation Compatible with M12 and 1/2 in taps Matched to 3‑flute tap geometries Single-piece workshop supply Reduce downtime with controlled, repeatable extraction Designed for the rapid recovery of damaged threaded connections, this extractor relies on counter-rotation to engage and remove a broken tap fragment without enlarging the existing thread. The opposite-turn method intentionally uses the original thread profile to coax the fractured piece free, reducing the need for thread repair or re-tapping. For maintenance planners and workshop managers, the main benefit is reduced downtime and fewer secondary operations after an extraction. Precision fit for 3‑flute tap geometries The tool is specified as Type 3, matching taps with three grooves. This geometry ensures a secure engagement with the broken tap and distributes extraction forces evenly, lowering the risk of further damage to the workpiece. Compatibility with M12 and 1/2 in thread standards makes the item versatile for mixed fleets of components and assemblies commonly encountered in general engineering and repair shops. The matching of tool geometry to tap design is central to achieving a precise, low-impact removal. Practical workshop design and clear usability advantages Supplied as a single unit, the extractor is intended for straightforward use in standard workshop settings. The working principle is simple: engage the device with the fragment and rotate against the thread direction to extract the breakage. This simple procedure enables technicians to act quickly while preserving the original thread where possible. For further specification queries or compatibility checks, Metav Werkzeuge offers technical clarification and product advice to support correct selection and application. Choose the TECWERK Thread Extractor Type 3, Size 6 for reliable tap recovery — order from Metav Werkzeuge or contact our Emmerich team at info@metav-werkzeuge.com or +49 2822 7131930 for expert guidance and supply Technical data Article number: 2000867806NW Label: Thread extractor Type 3, Size 6 for M12 / 1/2 in TECWERK Manufacturer: TECWERK Packaging unit: 1 Facts Type: 3 Size: Gr.6 — for M12 / 1/2 in SKU / UID: 2000867806NW Packaging: 1 unit Special features Tool for removing broken taps Removal by rotation opposite to the thread direction For taps with 3 flutes Single-piece supply FAQ How does the extractor remove a broken tap fragment? The extractor uses counter-rotation to engage the fragment; by turning opposite to the thread direction the tool leverages the original profile to withdraw the broken tap, reducing the need for additional threading work. Which tap geometries are compatible with this tool? This Type 3 extractor is specifically matched to 3‑flute tap geometries, ensuring secure engagement with taps designed with three flutes. Is the tool suitable for both metric and imperial threads? Yes — the item is specified for M12 and 1/2 in threads, making it suitable for applications where both metric and imperial fasteners are present. What is included in the delivery for SKU 2000867806NW? Delivery contains the single extractor unit (packaging unit: 1) described as the TECWERK Thread Extractor Type 3, Size 6 (SKU 2000867806NW). Can this extractor prevent the need for re-tapping after removal? When used correctly with compatible 3‑flute fragments, the extractor is designed to withdraw the broken piece while preserving the existing thread, thereby often avoiding the need for re-tapping. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Efficient recovery of threaded components is achieved with a tool that removes broken taps by rotating against the thread direction; the Type 3, Size 7 design for 3-flute taps and compatibility with M14 and 9/16 inch sizes minimise downtime and preserve the workpiece. Order the TECWERK tool directly via Metav Werkzeuge or consult the Metav team for application advice. Thread extractor Type 3, Size 7 for M14 / 9/16 inch taps – TECWERK The Thread Extractor Type 3 Size 7 is a specialist tap-removal tool for extracting broken taps from threaded holes by turning counter to the thread direction, suitable for maintenance and repair in metalworking workshops. Removes broken taps by reverse rotation For 3-flute taps (Type 3) Fits M14 and 9/16 inch taps Rapid recovery to reduce production downtime The primary benefit of this extractor is fast and reliable removal of broken taps, which helps restore components to production with minimal intervention. The design specified as Type 3 targets taps with three flutes, allowing the tool to engage and withdraw the broken section by turning in the opposite direction to the thread. This procedure avoids excessive material removal and significantly reduces the need for re‑machining, supporting efficient workflows in workshops and maintenance departments. Clear working principle for safe removal Operation relies on a simple mechanical principle: by rotating the extractor counter to the original tap direction, the tool grips and draws the fractured tap fragment out of the hole. The compatibility with M14 and 9/16 inch taps is established through the size designation Size 7, matched to common metric and imperial thread tools. The focused geometry for three‑flute taps ensures positive engagement; this means the extraction process is controlled, repeatable and less likely to damage the surrounding thread form compared with improvised methods. Practical fit for workshop toolkits and repair tasks This extractor is intended as a practical addition to workshop toolkits for maintenance engineers, toolroom staff and machine operators who encounter broken taps during production or repair. The compact, purpose‑built nature of the device makes it a time‑saving alternative to outsourcing tap removal, helping to maintain throughput and reduce external service costs. Integration into regular tooling inventories complements existing extraction procedures and supports predictable, economical plant maintenance. Request technical advice or a supply quotation from Metav Werkzeuge for the TECWERK Thread Extractor Type 3 Size 7; email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt support and reliable delivery from Emmerich Technical details Article number: 2000867807NW Designation: Thread extractor Type 3 Size 7 for M14 / 9/16 inch taps Brand: TECWERK Facts Size designation: 7 Number of flutes: 3 Compatible taps: M14, 9/16 inch Packaging unit: 1 Special features Tool for removing broken taps Removal by rotation against thread direction Type 3 for 3-flute taps FAQ What is the extractor used for? The TECWERK Thread Extractor Type 3 Size 7 is used for removing broken taps lodged in threaded holes by rotating against the thread direction to extract the fractured tap segment. Which tap profiles are compatible? Compatibility is for taps with three flutes; the extractor is specified for M14 and 9/16 inch tap sizes and the Size 7 designation indicates the matching geometry. How does the extractor engage the broken tap? Engagement is achieved by the tool’s geometry for three‑flute taps: turning the extractor counter to the original tapping direction allows the device to grip and withdraw the fragment without major disturbance to the thread. Is the tool reusable and workshop‑friendly? Yes, the design of the TECWERK extractor supports repeated use in a workshop environment; the compact tool is intended for routine maintenance and repair tasks where broken taps occur. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a purpose-built extraction solution that combines rapid broken-tap removal, compatibility with both M16 and 5/8 inch sizes, and a Type 3 geometry tailored for taps with three flutes — reliable workshop performance available from Metav Werkzeuge. Tap Extractor Crown Type 3, Size 8 for M16 / 5/8 inch – TECWERK The Tap Extractor Crown Type 3, Size 8 is a dedicated tool for removing fractured taps, engineered for workshop use with three-flute taps in metric M16 and imperial 5/8 inch dimensions. Effective broken-tap removal Designed for three flutes Compatible with M16 and 5/8 inch Faster extraction through controlled counter-rotation The primary advantage of this extractor is its ability to remove a broken tap by turning it against the thread direction. By applying a controlled counter-rotation, the crown engages the fragment and releases it with minimal risk of further thread damage. This method shortens repair time and reduces production downtime, providing a measurable benefit for maintenance schedules and repair workflows. The mechanism is straightforward and particularly effective on standard right-hand threaded taps when rotated counter-clockwise. Purpose-built for three-flute taps and mixed-size workshops This variant is specified for taps with three flutes and is sized for M16 and 5/8 inch applications, removing the need for improvised solutions. The geometry of the crown — designated Type 3 — matches the flute profile so engagement is positive and centred. For workshops handling both metric and imperial hardware, this reduces tool inventory while maintaining process reliability. The compatibility is declared in the product data, ensuring clear expectations during procurement. Secure engagement that preserves threading The Type 3 crown is shaped to bite into the broken section efficiently while avoiding excessive force that could enlarge or damage the parent thread. The design focuses on precise engagement and controlled extraction, which helps safeguard component integrity and reduces the requirement for subsequent rework. For technicians less familiar with tap rescue techniques, the crown’s geometry provides a dependable mechanical advantage without complex setup or specialist equipment. Workshop support and confidence from a trusted supplier Sourcing this TECWERK extraction crown through Metav Werkzeuge brings practical benefits beyond the tool itself: a curated selection, transparent supply channels from Emmerich, and a track record of consistent availability. Metav’s position as a “quality filter” for the European market means the tool arrives tested and ready for professional use. If further technical clarification or guidance is required regarding fitment or procedure, Metav’s contact options are available for enquiries by email or phone, supporting informed purchasing decisions. Contact Metav Werkzeuge for acquisition and advice on this TECWERK Tap Extractor Crown Type 3 (SKU 2000867808NW) — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications. Technical Data Article number: 2000867808NW Name: Gewindekrone Typ 3 Gr.8 f. M16 bzw. 5/8 Zoll TECWERK Brand: TECWERK Packaging unit: 1 UID: 2000867808NW Facts Type: 3 Size designation: Gr.8 for M16 / 5/8 inch Packaging unit: 1 Special features Tool for removing broken taps Removes fragment by rotation against thread direction For taps with three flutes Type 3 geometry FAQ How does this extractor remove a broken tap fragment? The extractor works by engaging the fragment and turning it against the thread direction; this counter-rotation loosens and extracts the broken section, as specified for the TECWERK Tap Extractor Crown Type 3. Which tap sizes are compatible with this crown? The crown is specified for M16 and 5/8 inch tap fragments and is identified as Size 8 in the product data. Is this tool suitable for taps with three flutes only? Yes, the Type 3 design is intended for taps with three flutes and achieves optimal engagement on that flute profile. How is the product supplied? The item is supplied in a packaging unit of 1 and is listed under article number 2000867808NW. Will the extractor damage the remaining thread? The extractor is designed for secure engagement with minimal additional thread damage when used with the correct extraction technique and appropriate rotation against the thread direction. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of rapid recovery, precise compatibility and simple handling to reduce downtime and save on rework; order the tool directly via Metav Werkzeuge or consult the technical team for application advice. Tap Extractor Type 3, Size 9 for M20 / 3/4 in (TECWERK) A compact tap extractor Type 3 Size 9 intended for the controlled removal of broken thread taps in metric M20 and 3/4-inch thread applications. Removes broken taps by counter-rotation Designed for taps with three flutes (Type 3) Compatible with M20 and 3/4 in thread taps Minimise downtime with controlled broken-tap recovery The tap extractor operates by rotating against the original thread direction so that a lodged fragment is withdrawn without further damage to the component. This counter-rotation method is effective for most breakage scenarios involving three-flute taps and is particularly valuable where re-threading or part replacement would be costly. The approach reduces production interruptions and lowers the risk of additional material loss, making it a pragmatic investment for maintenance and repair workflows. Accurate fit for three-flute taps and mixed metric/imperial work Engineered as Type 3 for taps with three flutes, the tool offers a precise engagement profile for reliable extraction. Its specification for M20 and 3/4 in thread taps ensures compatibility across common metric and imperial sizes encountered in mixed-production environments. Clear designation of the tool’s intended application helps maintenance planners make informed choices and supports efficient spare-part planning in workshops and service departments. Simple procedure and integration into workshop routines Operation is straightforward: align the extractor with the broken tap, engage the flutes, and apply rotation opposite to the threading direction to draw the fragment free. The method is compatible with standard workshop practices and can be integrated into existing toolkits without extensive training. For complex or uncertain cases, consultation with a technical adviser will clarify suitability and ensure correct use to protect the workpiece and tooling. Contact Metav Werkzeuge for product availability and tailored advice on using the TECWERK Tap Extractor; eMail: info@metav-werkzeuge.com | Tel: +49 2822 7131930 Technical data Article number: 2000867809NW Description: Tap extractor Type 3 Size 9 for M20 / 3/4 in (TECWERK) Packaging unit: 1 Facts Size: 9 Type: 3 Suitable for: M20 and 3/4 in thread taps Special features Tool for removing broken thread taps Removal by rotation against the thread direction For taps with three flutes Brand: TECWERK FAQ How does the extractor remove a broken tap? The extractor uses rotation against the original thread direction to withdraw the broken fragment; the TECWERK Tap Extractor Type 3 achieves this by engaging the tap’s flutes and turning counter to thread direction. Which tap geometries are supported? Designed specifically for three-flute taps, the tool is suitable for taps matching Type 3 geometry and indicated sizes in both metric and imperial systems. Is the extractor suitable for both M20 and imperial threads? Yes, the tool is specified for M20 and 3/4 in thread taps, allowing use in mixed-production environments where both standards occur. What is included in the delivery? The package contains the tap extractor as described; the product is supplied as a single unit (packaging unit 1). Can the tool be used without specialist equipment? The extraction method is compatible with standard workshop procedures; the TECWERK extractor can be operated within typical maintenance toolkits, with technical guidance available if required. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of a compact, reliable solution for broken-thread extraction: the Type 3 design removes fragments of broken taps by turning against the thread direction and is made for small sizes such as M3 and 4/32 inch. The extractor combines targeted functionality with straightforward handling to reduce downtime; order directly via Metav Werkzeuge or consult the team for application advice. Gewindekrone Type 3, size 0 — Tap extractor for M3 and 4/32 inch taps (TECWERK) The Gewindekrone Type 3, size 0 is a dedicated tap extractor that removes broken M3 and 4/32 inch taps by counter-rotation; suited to repair and maintenance in small-part workshops. Removes broken taps by counter-rotation Designed for taps with 3 flutes Compact size for small-diameter taps Single-piece delivery for immediate use Faster recovery from broken taps to keep production flowing The Type 3 tap extractor delivers a focused remedy for a frequent shop-floor problem: a broken tap lodged in a threaded hole. With its 3-flute configuration and a geometry engineered for counter-rotation removal, the tool engages the fractured tap so the fragment is extracted along the original thread path. This method reduces the need for reboring or extensive rework and shortens machine downtime. The design emphasises mechanical efficiency and repeatability, delivering a measurable improvement in maintenance throughput. Clear function and simple handling for reliable workshop results Operation relies on the extractor being introduced into the broken tool and turned opposite to the original tapping direction; this motion leverages the thread form to pull the fragment out without enlarging the hole. The M3 and 4/32 inch compatibility covers common small-thread sizes used in electronics housings, instrumentation and precision assemblies. The tool’s geometry for 3-flute taps is explained by its matching to the broken tap profile: the extractor bites where a standard removal method would slip, offering a controlled and conservative extraction process that preserves the parent component. Practical suitability for maintenance, repair and tool rooms This extractor is aimed at maintenance technicians, tool-room engineers and precision-fitters who need a compact, specialist solution. Supplied as a single unit, the tool fits into standard workshop procedures and is straightforward to store and mobilise in repair kits. The robust construction and purpose-designed flute engagement make it a dependable option for recurring maintenance tasks where fast, precise broken tap removal is required. For operations that value minimal material loss and repeatable outcomes, the extractor offers a pragmatic balance of form and function. For specialist advice on application and to secure the TECWERK Type 3 tap extractor, please contact Metav Werkzeuge for tailored assistance and ordering at info@metav-werkzeuge.com or by telephone on +49 2822 7131930. Technical Data Article number: 2000867800NW UID: 2000867800NW Model: Tap extractor Type 3, size 0, for M3 and 4/32 inch taps (TECWERK) Facts Type: 3 Size designation: 0 Intended thread sizes: M3 and 4/32 inch Packaging unit: 1 Special features Tool for removing broken taps Removal by counter-rotation Suitable for taps with 3 flutes Brand: TECWERK FAQ What thread sizes is this extractor suitable for? The extractor is specified for M3 and 4/32 inch taps; the Gewindekrone Type 3 size 0 (TECWERK, SKU 2000867800NW) matches common small-diameter threads. How does the extractor remove a broken tap without enlarging the hole? Removal is achieved by turning the extractor opposite to the tap’s original rotation; the Type 3 geometry engages the fragment and extracts it along the existing thread path, minimising material loss. Is the tool compatible with taps that have fewer or more flutes? This variant is designed specifically for 3-flute taps; for other flute counts a matching extractor geometry is recommended to ensure secure engagement. Can the extractor be used in precision assemblies and electronic housings? Yes, the compact size and targeted action make the tool suitable for delicate work such as instrumentation and small-part assemblies where controlled extraction is essential. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of rapid extraction with minimal rework thanks to the combination of precise fit for small taps and a clear counter-rotation removal method; order directly via Metav Werkzeuge or consult the team for application advice. Tap extractor crown Type 3, Size 1 for M4 / 5/32 in — TECWERK The Tap extractor crown Type 3, Size 1 is a specialised extractor for removing broken taps from threaded holes in metalworking and workshop maintenance. Removes broken taps by reverse rotation Suitable for taps with three flutes Compatible with M4 and 5/32 in taps Fast, reliable removal to reduce downtime The extractor uses a targeted counter-thread action: by turning against the original thread direction, the tool grips and withdraws the fractured tap piece, avoiding additional drilling or workpiece damage. This method provides a clear efficiency advantage in repair operations, shortening unplanned machine stops and reducing manual rework. The design focuses on controlled extraction, giving consistently predictable results when removing broken taps from small threaded bores. Exact compatibility with three-flute taps and small threads Built as Type 3, the crown is specifically matched to taps that have three flutes; this ensures secure engagement with the fragment and prevents slippage during extraction. The sizing for M4 and 5/32 in means the tool is tailored for common small-thread repair tasks encountered in precision workshops and maintenance benches. Correct match between extractor and tap geometry is essential for a safe, damage-free process — the crown’s geometry facilitates precise alignment and force transfer. Practical choice for routine workshop maintenance As a compact workshop solution, the extractor crown supports straightforward, mechanical operation without elaborate setup. For maintenance teams and service technicians, it represents a pragmatic way to restore threaded components quickly while preserving the original hole. The tool’s role emphasises process continuity: fewer outsourced repairs, less component scrap and faster return to production. Metav’s advisory support can assist in confirming suitability for specific tap variants or materials before purchase. For expert advice and to order the TECWERK tap extractor crown Type 3, Size 1, contact Metav Werkzeuge by e‑mail at info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and sourcing from Emmerich Technical data Article number: 2000867801NW Product name: Tap extractor crown Type 3, Size 1 for M4 / 5/32 in Manufacturer: TECWERK Packaging unit: 1 Core technical data Type: 3 Thread compatibility: M4 / 5/32 in SKU / UID: 2000867801NW Special features Removes broken taps by counter-thread rotation Intended for taps with three flutes Tool category: extractor crown FAQ How does the extractor remove a broken tap? The extractor crown works by rotating counter to the thread direction so the tool bites the fragment and draws it out; this method is the core function of the TECWERK tap extractor crown Type 3, Size 1. Which tap geometries are supported? This Type 3 crown is designed for taps with three flutes and fits small threads such as M4 and 5/32 in, ensuring a secure engagement with the broken section. Can the extractor be used on hardened materials? The tool’s application is determined by the original tap material and break condition; the TECWERK crown is designed for standard workshop tap failures—consult the technical advisor if working with specialised or hardened taps. Is special equipment required to operate the crown? No specialised machinery is mandatory; the extractor is operated by rotation against the thread direction. For unusual cases, professional workshop practice and correct alignment are advised. What is the article number for ordering and reference? Order reference: 2000867801NW; this identifier corresponds to the TECWERK tap extractor crown Type 3, Size 1. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

The TECWERK thread extractor combines precise removal of broken taps with compatibility for both M5 and 3/16 in sizes and a three‑flute design for reliable extraction; order the tool directly via Metav Werkzeuge or consult our technical advisors for application guidance. Thread Extractor Type 3, Size 2 for M5 / 3/16 in — TECWERK Thread Extractor Type 3, Size 2 is a specialist tool for removing broken taps from threaded holes, designed for use with three‑flute taps in metric and imperial sizes Removes broken taps by counter‑rotation Designed for three‑flute taps Compatible with M5 and 3/16 in taps Minimising downtime with a precise extraction method The TECWERK extractor is engineered to remove broken taps efficiently by engaging the fragment and turning against the thread direction; this counter‑rotation causes the fragment to back out without enlarging the hole. For maintenance teams and production workshops, this means reduced downtime and fewer scrapped components. The tool’s compatibility with M5 and 3/16 in threaded taps makes it suitable for common repair tasks in general engineering and light manufacturing. Why the three‑flute design matters for secure removal A three‑flute tap leaves characteristic grooves when it fractures; the Type 3 extractor matches that geometry to increase contact area and grip on the broken piece. This improved engagement lowers the risk of the extractor slipping or causing further damage to the internal thread. The method works mechanically rather than by forceful impact, offering a controlled removal that preserves the parent thread and supports later re‑tapping or repair if required. Practical handling, application scope and safety considerations Supplied in a single unit, the extractor is intended for workshop use during maintenance and repair operations where broken taps occur. Accessible handling and clear function mean minimal additional tooling is needed beyond a suitable driver or holder that permits controlled counter‑rotation. For operators less familiar with extraction procedures, following standard workshop safety and alignment practice will ensure consistent results while protecting the threaded component and the operator’s tooling investment. For reliable removal of broken taps choose the TECWERK Thread Extractor Type 3 (SKU 2000867802NW) via Metav Werkzeuge or contact our technical team at info@metav-werkzeuge.com or +49 2822 7131930 for tailored advice Technical data Article number: 2000867802NW Product: Thread Extractor Type 3, Size 2 Brand: TECWERK Core specifications Type: 3 Compatible sizes: M5, 3/16 in Tap flute compatibility: three‑flute taps Packaging unit: 1 Features & applications Tool for removing broken taps Extraction by turning against thread direction (counter‑rotation) Suited to workshop maintenance and repair tasks FAQ Which tap sizes are supported by this extractor? The TECWERK Thread Extractor Type 3, Size 2 is compatible with M5 and 3/16 in taps and is intended for use with three‑flute tap breakages (SKU 2000867802NW). How does the extractor remove a broken tap? Removal is achieved by engaging the broken fragment and turning the extractor counter to the thread direction; this counter‑rotation pulls the fragment out without expanding the hole. Is the extractor suitable for all tap types? This Type 3 extractor is specifically designed for three‑flute taps; it is not optimised for taps with a different flute count. How many units are supplied per package? The product is supplied as a single unit (packaging unit 1) ready for workshop use. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund

Benefit from fast, reliable removal of broken taps with a tool designed for 3-flute cutters and compatible with both M6 and 1/4 inch sizes; the simple counter-rotation method reduces rework and shortens downtime on the shop floor. Order directly via Metav Werkzeuge or consult the technical team for application advice. Broken Tap Extractor Type 3, Size 3 for M6 / 1/4 inch – TECWERK Broken Tap Extractor Type 3, Size 3 is a compact removal tool for extracting fractured taps with three flutes, suitable for metric M6 and imperial 1/4 inch threads. Removes broken taps efficiently Counter-rotation removes fragments Designed for 3-flute taps (Type 3) Minimise downtime with targeted extraction The tap extractor is engineered to recover fractured taps without enlarging or reworking the hole, delivering a direct benefit to production flow. By engaging the fragment and applying rotation counter to the thread direction, the tool pulls the broken section free rather than forcing it deeper. For maintenance teams and toolrooms this means fewer component scrapings, less fixture rework and a quicker return to operation. The practical outcome is an efficient repair routine that supports continuous machining schedules. Clear compatibility and straightforward operation Compatibility with M6 and 1/4 inch threads and the designation Type 3 indicate suitability for taps with three flutes; this ensures correct engagement and reliable removal. A three-flute cutter presents three cutting grooves around the tap shank, which the extractor is shaped to accommodate. The removal is achieved by turning the extractor in the opposite direction to the original tap feed — a simple mechanical principle that avoids complex setups. For users less familiar with tap geometry, this method is robust and easy to apply, reducing the need for specialist intervention. Practical benefits for workshop reliability The design objective is a low-complexity accessory that integrates into standard workshop procedures. As a single-piece tool supplied in a pack unit of 1, it fits the operative habit of keeping essential remedial tools on hand. The focused function—removing broken taps by counter-rotation—reduces dependency on more invasive extraction methods and preserves thread integrity where possible. For procurement and maintenance planners, this translates into predictable tool performance and a practical addition to a service kit that supports rapid fault clearance. For a dependable extraction solution from TECWERK and tailored purchase advice, contact Metav Werkzeuge for a technical consultation or to place an order via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000867803NW Description: Broken tap extractor, Type 3, Size 3, for M6 / 1/4 inch Pack unit: 1 Manufacturer: TECWERK Facts Type: 3 Flutes: 3 Compatible thread sizes: M6, 1/4 inch Pack quantity: 1 Special features Tools for removing broken taps Removal by turning counter to thread direction Designed specifically for taps with three flutes FAQ What thread sizes does this extractor support? The extractor is suitable for M6 metric taps and 1/4 inch imperial taps, matching the Type 3, Size 3 specification. How does the tool remove a broken tap? Removal is achieved by turning the extractor against the thread direction so the broken section is withdrawn rather than driven further into the hole. Is this extractor suitable for taps with different flute counts? This model is optimised for 3-flute taps; alternative flute counts require a matching extractor type for reliable extraction. How many units are supplied per package? The product is supplied as a single unit (pack unit 1) and is intended as a workshop spare or service tool. Can this extractor preserve the existing thread? When used correctly, the extractor is designed to withdraw the broken tap with minimal disturbance to the original thread, reducing the need for rework. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund

Take advantage of rapid, controlled extraction for broken taps thanks to the tool's counter-rotation method and dedicated fit for three-flute taps; reliable compatibility with both M8 and 5/16 in threads reduces rework and production delays. Order the TECWERK tap extractor directly via Metav Werkzeuge or consult the Metav advisors for application guidance. TECWERK Tap Extractor Type 3 — Size Gr.4 for M8 / 5/16 in A TECWERK Tap Extractor Type 3 Gr.4 designed for the removal of broken taps with three flutes in metric and imperial threads, ideal for workshop and maintenance applications. Tool for removing broken taps by counter-rotation For three-flute taps (Type 3) Size group 4 for M8 / 5/16 in threads Precise fit reduces risk of further thread damage Faster recovery with controlled counter-rotation The extractor uses a deliberate counter-rotation method: by turning against the thread direction the fragment is progressively loosened and withdrawn. This controlled reversal reduces the need for destructive measures such as drilling out the broken piece, preserving the original bore and minimising additional machining. For production environments and maintenance shops this means fewer scrapped parts and faster recovery after a tap breakage, supporting uninterrupted workflows and predictable output. Precision fit for three-flute taps and mixed thread systems Designed specifically for three-flute taps, the tool’s geometry matches the flute profile to secure a positive grip on the remaining tap shank. The Gr.4 size covers both M8 metric and 5/16 in imperial threads, providing cross-system compatibility without excessive inventory. Clear identification of the type and size simplifies selection and ensures the correct engagement, which is essential when working across mixed batches or legacy components. Simple operation that reduces downtime Operation is straightforward: engage the extractor with the broken tap and apply controlled reverse rotation until the fragment releases. The uncomplicated handling reduces the time spent on extraction and limits workstation downtime. For technicians and maintenance teams the result is a pragmatic solution that emphasises efficiency and repeatability, making the extraction task less disruptive to production schedules and maintenance windows. Handling and maintenance for consistent results Regular inspection of the extractor for wear preserves its alignment with tap flutes and extends service life. Correct storage and routine checks before use ensure consistent engagement and minimise the risk of slippage during extraction. When combined with standard workshop practices, the tool contributes to repeatable outcomes and reliable maintenance cycles, supporting overall process quality and reducing unplanned repair operations. For dependable tap recovery in workshop and industrial settings, order the TECWERK Tap Extractor Type 3 Gr.4 via Metav Werkzeuge or contact the Metav advisors for detailed application support at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: 2000867804NW Product: Tap extractor Type 3, size Gr.4 for M8 / 5/16 in Brand: TECWERK Facts Size designation: Gr.4 (M8 / 5/16 in) Type: 3 Packaging unit: 1 UID: 2000867804NW Special features Tool for removing broken taps Removal by turning against thread direction (counter-rotation) For taps with three flutes FAQ How does the extractor remove a broken tap fragment? The extractor works by applying controlled counter-rotation to the lodged tap fragment; the TECWERK Tap Extractor Type 3 engages the flute profile and reverses the fragment out of the bore. Which tap geometries are compatible with this tool? This extractor is matched to three-flute taps (Type 3) and is specified for Gr.4 size applications such as M8 and 5/16 in threads. Can the tool be used for both metric and imperial threads? Yes, the Gr.4 size covers both M8 (metric) and 5/16 in (imperial), offering cross-system compatibility for common workshop tasks. What is meant by "Type 3"? Type 3 indicates suitability for taps with three flutes; the designation ensures the extractor’s profile matches the tap geometry for secure engagement and effective removal. What is included in the delivery? Delivery comprises a single unit (packaging unit 1) of the TECWERK Tap Extractor Type 3 Gr.4, article number 2000867804NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund