12.7mm Loc-Line Coolant Hose Set 30pc, Assorted Nozzles and Fittings - LOC-LINE
Take advantage of a modular coolant delivery solution with a wide choice of nozzles and integrated valves for reliable process control; order the set directly via Metav Werkzeuge or consult our specialists for configuration help. Loc-Line Coolant Articulated Hose Set 12.7 mm (1/2 inch) — 30-piece The Loc-Line 12.7 mm (1/2 inch) coolant articulated hose set provides modular coolant routing for machine tools and CNC workstations, supplying a flexible, easy-to-configure system for targeted cooling and chip removal. Modular 12.7 mm (1/2") coolant line system Comprehensive set for common machining tasks Includes shut-off and check valves NPT adaptors and nine 95 mm hose segments Precise coolant delivery to improve machining outcomes The modular design of the 12.7 mm articulated line enables concentrated coolant delivery to the cutting zone, reducing heat and improving tool life. A variety of nozzle sizes and shapes in the set allow focused streams or broader coverage where required, so coolant flow can be matched to both tool geometry and machining operation. The inclusion of a shut-off valve and a check valve supports flow control and process safety, reducing waste and minimising contamination risk. For operations that demand repeatable conditions, the system’s consistent alignment and secure joints support stable, measurable results. Rapid assembly and straightforward maintenance for workshop efficiency Components snap together without specialised tooling and the set includes an assembly pliers for convenient fitting, which shortens setup time and reduces machine downtime. Individual segments and nozzles are replaceable, allowing selective renewal of worn parts rather than full-system replacement. This modularity translates into lower life-cycle effort and keeps maintenance predictable and cost-effective. The available thread adaptors (NPT R 9.53 mm and R 12.7 mm) ensure compatibility with common coolant outlets on lathes, milling machines and small CNC centres, enabling straightforward integration into existing coolant circuits. Versatility across machining tasks and enhanced process control The assortment of round, flat and multi‑hole nozzles in the set supports a wide range of tasks from fine drilling to aggressive milling; flat spray options assist in surface cooling while multi‑hole nozzles distribute coolant for delicate finishes. The supplied components constitute a basic but comprehensive toolkit for many standard applications, reducing the need for multiple specialised systems. Because the system is modular, modifications for new tasks are quick: reconfigure the line, select a different nozzle and restore optimal coolant contact without extensive rework. Built for dependable daily use in production environments Constructed with workshop practicality in mind, the set combines proven connection standards and serviceable parts to support continuous operation. The design reduces the likelihood of misalignment and leaks, supporting cleaner workspaces and fewer interruptions. For shops seeking measurable productivity gains, the articulated hose solution contributes to longer tool life, better surface quality and more consistent cycle times — tangible advantages for both jobbing and serial production contexts. For tailored advice on integrating the Loc-Line coolant articulated hose set into a specific machine or workflow, contact Metav Werkzeuge for configuration support and ordering assistance Technical data Article number: 4000879871NW Manufacturer: LOC-LINE Product type: Coolant articulated hose set Content: 30 pieces Packaging unit: 1 Facts Hose diameter: 12.7 mm (1/2 inch) Hose segments: 9 × 95 mm Thread adaptors: NPT R 9.53 mm (3/8") and NPT R 12.7 mm (1/2") Nozzle diameters and types: 6 mm Ø, 9 mm Ø, 12 mm Ø, 32 mm wide, 63 mm wide, 18×2 mm flat, 18×3.2 mm flat, 5‑hole 3.2 mm Ø, 7‑hole 2 mm Ø, 20×2 mm joint shower nozzle Special features Set and basic equipment for common applications Includes shut-off valve with articulated connection Includes check valve Includes assembly pliers for quick installation Variety of round, flat and multi‑hole nozzles for targeted cooling FAQ What is included in the set and is it ready for use? The set contains 30 pieces as listed — segments, multiple nozzle types, two NPT adaptors, a shut-off valve, a check valve and an assembly pliers — and is supplied as a basic equipment kit for common applications. Can the articulated hoses be connected to standard machine outlets? Yes. The set includes NPT R 9.53 mm (3/8") and NPT R 12.7 mm (1/2") adaptors for compatibility with typical coolant outlets on machine tools. Is the flow adjustable with the components supplied? Flow control is possible via the included shut-off valve and by selecting nozzle sizes from the assortment to achieve the desired jet profile and flow rate. How are worn or clogged nozzles replaced? Nozzles and segments are modular and replaceable; individual parts can be swapped out without replacing the whole assembly, simplifying maintenance and keeping downtime to a minimum. Does the set suit both milling and turning operations? Yes. The variety of nozzle shapes and the flexible positioning provided by the articulated segments make the set suitable for both milling and turning where targeted coolant delivery is required. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
12.7mm Loc-Line Coolant Hose Set With 8 Pieces, Multiple Nozzles - LOC-LINE
Take advantage of the combination of modular 12.7 mm Loc‑Line construction, a versatile nozzle assortment and simple installation for dependable coolant flow in machining tasks; order the kit directly via Metav Werkzeuge or consult our specialists for configuration advice. Loc‑Line Coolant Articulated Hose Set 12.7 mm (1/2") — 8‑piece A Loc‑Line Coolant Articulated Hose Set designed for precise, modular coolant routing on machine tools and general workshop equipment. Loc‑Line modular system, 12.7 mm diameter Includes 6 nozzle types for flexible jets Two 140 mm articulated hoses included NPT 3/8" and 1/2" thread adapters Deliver coolant exactly where it is needed for improved machining consistency The kit is engineered to provide targeted coolant delivery so that cutting edges receive lubrication and cooling at the point of contact. Using the 12.7 mm Loc‑Line modular channels, the arrangement of nozzles and hoses permits pinpoint orientation of the coolant jet, which contributes to more consistent chip evacuation and reduced thermal loading on tools. The presence of several nozzle options allows selection of a narrow concentrated stream or a broader spray, translating technical features into measurable process benefits: better surface finish and steadier cycle times. Flexible modular assembly that adapts to different machine setups Segments and joints permit rapid repositioning of the coolant line without special tools; the modular approach supports reconfiguration when workpieces or fixtures change. The articulated hoses included in the set offer length and reach that suit common machine interfaces, while the NPT thread adapters ensure compatibility with standard coolant outlets. This flexibility reduces setup time and minimises interruptions during changeovers, supporting smooth workshop operations and quicker return to production after fixture adjustments. Broad nozzle selection for controlled flow patterns and spray behaviour A carefully chosen assortment of round nozzles and a wide‑spray nozzle deliver a range of flow patterns for chip flushing, tool cooling or surface treatment. Smaller orifices concentrate flow for deep cuts, whereas the flat nozzle produces a uniform curtain for general cooling across a wider area. The inclusion of thread adapters means the nozzles integrate directly into existing coolant lines, simplifying installation and avoiding the need for bespoke fittings. This variety lets the workshop match spray characteristics to machining strategy, improving process control. Practical scope of delivery and straightforward workshop integration The set contains articulated hoses, assorted round and flat nozzles and NPT thread adapters that provide a ready‑to‑fit solution for many conventional machining tasks. Delivered as a compact kit, the system reduces the number of individual purchases and enables immediate deployment on lathes, milling machines or drilling rigs. The robust connection concept and clear assortment eliminate lengthy sourcing and assembly times, offering a pragmatic path to improved coolant management and less reactive maintenance in busy production environments. Contact Metav Werkzeuge for tailored configuration advice on the Loc‑Line modular coolant system and prompt dispatch from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000879870NW Item label: Kühlmittelschlauchset Gr. 1/2 ” 8 tlg. Loc‑Line Type: Loc‑Line 12,7 mm (1/2 Zoll) Product category: Coolant articulated hose set Content: 8 teilig Packaging unit: 1 Manufacturer: LOC‑LINE UID: 4000879870NW Facts System diameter: 12.7 mm (1/2") Hose length: 140 mm (articulated hoses) Round nozzle diameters: 6 mm, 9 mm, 12 mm Flat nozzle width: 32 mm Thread adapters: NPT 9.53 mm (3/8") and NPT 12.7 mm (1/2") Special features Modular Loc‑Line jointed hose system Assortment of round and wide‑spray nozzles NPT thread compatibility for common coolant outlets Basic set prepared for standard applications in workshops Brand: LOC‑LINE FAQ What interfaces are included for mounting to machine coolant lines? The Loc‑Line coolant articulated hose set includes NPT thread adapters for 3/8" and 1/2" connections, allowing direct attachment to standard coolant outlets without additional fittings. Can the nozzle selection handle both concentrated jets and broad sprays? Yes, the assortment in the set comprises several round nozzles of different diameters and a wide‑spray nozzle so that the spray pattern can be adapted to concentrated cooling or broader coverage. Is the kit suitable for retrofitting on small lathes and milling machines? The modular nature and compact articulated hoses make the kit well suited for retrofitting on a wide range of machine tools and workshop equipment where targeted coolant control is required. How does the system improve machining performance? By enabling directed coolant delivery and a choice of nozzle patterns, the assembly helps reduce cutting temperatures and improve chip evacuation, supporting more consistent tool performance and surface quality. Does the set come ready for immediate use or is additional assembly required? The package is delivered as a basic set that requires simple assembly of the modular segments and installation of the chosen nozzles and adapters; no specialised components are needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Loc-Line Coolant Hose Set 29-Piece Flexible Nozzles, NPT Fittings - LOC-LINE
Take advantage of a modular 6.35 mm (1/4") coolant routing system that bundles essential nozzles, valves and fittings for immediate use; the included shut-off and check valves allow precise flow control and reduce setup tweaks. Order the set directly via Metav Werkzeuge or consult our specialists for application advice. LOC-LINE Coolant Hose Set 6.35 mm (1/4") — 29-piece modular coolant delivery kit LOC-LINE 6.35 mm (1/4") modular coolant joint hose set for directed coolant or air flow in machine tools and workshop fixtures Modular 6.35 mm (1/4") hose segments Variety of nozzles for precise flow control Integral shut-off and check valves Complete mounting tools included Deliver coolant where it matters — efficient, measurable flow control for machining This modular system provides a reliable method of delivering coolant and compressed air directly to the cutting zone. The set is built around 6.35 mm (1/4") hose segments that permit targeted routing, while the assortment of nozzles with defined diameters (1.5 mm, 3 mm, 6 mm and wider fan options) enables consistent fluid delivery. For machining operations this translates into improved chip evacuation and more predictable tool wear, so machining cycles run with better repeatability and less manual adjustment. Reduce machine downtime with fast assembly and flexible configuration The kit is designed for rapid installation: segmented hoses connect quickly to NPT-threaded fittings and can be reconfigured without specialised tools. Included items such as a clamp ring with screw, Y-branch and two sizes of NPT adapters (3.18 mm / 1/8" and 6.35 mm / 1/4") make it straightforward to adapt one setup to several applications. The supplied assembly pliers speed up assembly and disassembly, helping workshops shorten changeover times and maintain production flow. Precision components that support consistent process results Integral control elements — a shut-off valve with a swivel joint and a check valve — permit on-the-spot flow regulation and backflow prevention. The mixture of round, flat and multi-orifice nozzles ensures that coolant can be applied as a narrow jet, a broad fan or multiple fine streams, matching cutting strategies from high-speed finishing to heavy-duty roughing. Clear labelling of fittings and standardised NPT threads simplify integration with existing coolant lines and machine interfaces. Built for workshop life: adaptability and low maintenance All components are intended for routine workshop use and offer straightforward replacement should the configuration change. The modular nature reduces the need for bespoke pipework, and individual segments are lightweight to position yet sturdy enough to hold alignment under typical machining conditions. The kit is a practical solution for maintenance teams and production engineers seeking a versatile, serviceable coolant routing option. For reliable, modular coolant routing choose the LOC-LINE coolant joint hose set — contact Metav Werkzeuge for procurement and tailored advice from our Emmerich team at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 Technical data Article number: 4000879841NW Manufacturer: LOC-LINE Product type: Coolant joint hose set Content: 29 pieces Facts Diameter: 6.35 mm (1/4") Thread adapters: NPT R 3.18 mm (1/8") and NPT R 6.35 mm (1/4") Nozzle diameters: 1.5 mm, 3 mm, 6 mm, 25 mm wide, flat 12×1 mm, flat 12×1.5 mm Multi-orifice nozzles: 5-hole 1.5 mm, 7-hole 1 mm Qty of hose segments: 8 × 90 mm Special features Modular segmented hoses Round, flat and fan nozzles Clamp ring with screw Y-branch and swivel fittings Shut-off valve with swivel joint Check valve included Assembly pliers included FAQ What contents are included in the 29-piece kit? The kit contains 8 segmented hoses (90 mm), a range of nozzles (round, flat and multi-orifice), a clamp ring with screw, a Y-branch, two NPT thread adapters (1/8" and 1/4"), a shut-off valve, a check valve and assembly pliers; the full parts list matches SKU 4000879841NW. Can the system be adapted to existing coolant lines with standard threads? Yes. The set includes NPT adapters (3.18 mm / 1/8" and 6.35 mm / 1/4") to interface with common machine fittings, allowing straightforward integration of the LOC-LINE coolant delivery system. How is flow controlled on the assembly? Flow regulation is achieved with the included shut-off valve featuring a swivel joint for positioning; the check valve prevents backflow, maintaining stable delivery during intermittent cycles. Is the set suitable for both coolant and compressed air? The components are suitable for directing fluids and air; nozzle geometry controls spray pattern and droplet size, so the system can be used for coolant application or directed air jets in machine tool processes. Are replacement parts available for the modular segments and nozzles? Individual segments and nozzle types are standard within the LOC-LINE modular range and can be replaced as needed to adapt the setup or refresh worn components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
6.35mm Loc-Line Coolant Hose Set 8-Piece, Interchangeable Nozzles NPT Adaptors - LOC-LINE
Take advantage of the flexible segmented hoses and the assorted nozzle options to achieve targeted coolant delivery and better chip evacuation; order the Loc‑Line components directly via Metav Werkzeuge or ask their consultants for application advice. Loc‑Line Coolant Hose Set — 6.35 mm (1/4 in) modular coolant delivery with assorted nozzles Loc‑Line Coolant Hose Set for precise coolant routing in machining and workshop applications, designed as a modular coolant articulated hose solution Flexible segmented hoses for precise coolant direction Assorted nozzles Ø 1.5 / 3 / 6 mm and 25 mm wide fan NPT thread adapters 1/8" and 1/4" for machine ports Modular system for fast repositioning and retrofitting Precise coolant delivery that extends tool life The modular articulated hoses provide targeted cooling directly at the cutting zone, reducing heat build-up and improving lubrication where it matters most. The segmented design allows for repeatable positioning and quick repositioning without the need for tools, saving set-up time between operations. By directing the coolant stream, heat is removed more efficiently and chip flow is improved, which can contribute to longer tool life and fewer re‑works. The construction supports both spot cooling and small‑area flood, giving process engineers control over cooling strategy. Variable nozzle selection for process optimisation This system includes a range of assorted nozzles to adapt flow characteristics to the task: fine jets for precision cooling and a wide‑angle nozzle for broader coverage. The available diameters (1.5 mm, 3 mm, 6 mm) and the 25 mm wide fan let operators control coolant volume and spray pattern, aiding chip evacuation and surface finish. Smaller orifices concentrate flow for delicate cuts; the wide nozzle distributes coolant to a larger area for general cooling and lubrication. Understanding nozzle behaviour helps to reduce coolant consumption while maintaining machining performance. Fast installation and compatibility with standard ports The set is supplied with NPT adapters for both 1/8" and 1/4" connections, enabling straightforward attachment to common machine coolant outlets. Two articulated hoses of 140 mm length are included for flexible reach near the tool holder, and the modular nature means components can be reconfigured or extended as needed. The simple push‑fit joints require no special tools, so maintenance and reconfiguration are rapid. For shops prioritising uptime, the modular approach minimises downtime during tool changes or process adjustments. A practical choice for workshops and production cells Workshops and production cells benefit from a robust, repeatable coolant routing system that is easy to service and adapt. The Loc‑Line modular arrangement permits replacement of individual segments or nozzles without discarding the whole assembly, supporting a cost‑efficient maintenance cycle. The clear function of each component simplifies training for operators and ensures that the system integrates smoothly into existing coolant circuits. For flexible machining setups and small series production, the combination of adaptability and precision makes this articulated hose solution a practical addition to the tooling inventory. For targeted coolant control and expert advice on the Loc‑Line coolant hose set, contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930 to discuss suitability for specific applications Technical Data Article number: 4000879840NW Item name: Coolant articulated hose set, 1/4 in, Loc‑Line Type: Loc‑Line 6.35 mm (1/4 in) Product type: Coolant articulated hose set Manufacturer: LOC‑LINE Contents: 8 parts Facts Hose diameter: 6.35 mm (1/4 in) Hose length: 140 mm (2 pieces) Nozzle diameters: 1.5 mm, 3 mm, 6 mm Wide nozzle width: 25 mm Thread adapters: NPT 3.18 mm (1/8") and NPT 6.35 mm (1/4") Special features Set and basic equipment for common applications Modular articulated hose system Includes two joint hoses, three round nozzles, one wide‑jet nozzle Includes NPT nipples for 1/8" and 1/4" connections FAQ What nozzle sizes are included in the set? The set contains round nozzles in 1.5 mm, 3 mm and 6 mm diameters plus a 25 mm wide fan nozzle for broader coolant coverage. Can the hoses be connected to standard machine ports? Yes, the set includes NPT adapters for both 1/8" and 1/4" ports to fit common coolant outlets on machining equipment. Are the articulated hoses easy to reposition during setup? The segmented, modular construction allows quick repositioning without tools, so adjustments at the machine are fast and repeatable. Is this system suitable for both precision and general cooling tasks? The combination of fine jet nozzles and a wide‑angle nozzle makes the system suitable for targeted precision cooling as well as broader lubrication and chip‑control tasks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com