0-32% Hand Refractometer Adjustable Eyepiece 0.2% Scale ARIANA
Take advantage of a precise measuring range and a fine scale division to secure optimal emulsion quality, prolong tool life and reduce corrosion risk; order the ARIANA hand refractometer directly via Metav Werkzeuge or ask our consultants if needed. ARIANA Hand Refractometer — portable 0–32 % range with 0.2% scale division The ARIANA Hand Refractometer is a compact handheld instrument for rapid, workshop-level control of coolants, cutting fluids and lubricants to maintain correct emulsion concentration. Rapid, precise coolant and lubricant checks 0–32 % measuring range, 0.2% scale division Adjustable eyepiece for clear focusing Supports emulsion control to extend tool life Fast, measurable control for consistent process quality The portable instrument enables quick verification of emulsion concentration, ensuring that mixed coolants, cutting and lubricating fluids remain within the intended specification. With a 0–32 % measuring range and a 0.2% scale division, the device provides readings fine enough to detect small deviations that otherwise shorten tool life or compromise machining performance. This measurable precision translates into predictable maintenance schedules and fewer production interruptions, which supports operational efficiency and reduces unexpected downtime. Reduced wear and corrosion through correct concentration A correctly adjusted emulsion prevents both excessive dilution and overly concentrated mixtures. The consequence of consistent monitoring is longer tool life and clear rust prevention benefits: under-dosed emulsions can leave metal surfaces exposed, while overdosing wastes material and budget. By using a reliable portable refractometer to maintain the recommended mixture, workshops can realise tangible cost savings through lowered tool replacement rates and reduced machine maintenance, making the instrument a cost-effective quality control step. Simple to operate and interpret in workshop environments Designed for practical use, the unit features an adjustable eyepiece to accommodate different users and lighting conditions, allowing straightforward focusing and clear readings without specialised training. The instrument’s scale presents results directly in percentage points, so staff can compare readings with target values at a glance. For regulatory and safety alignment, emulsion adjustments can be made in line with applicable guidelines such as TRGS-611, enabling compliant handling of coolant concentrates without complex calculations. For precise emulsion management, select the ARIANA hand refractometer through Metav Werkzeuge for reliable delivery from Emmerich; contact our specialists at info@metav-werkzeuge.com or +49 2822 7131930 for tailored guidance and purchasing support. Technical Data Article number: 4522222001NW Label: Handrefraktometer Messber.0-32% m.verstellbarem Okular Skalenteilung 0,2% ARIANA Manufacturer: ARIANA Product type: Hand refractometer Packaging unit: 1 Facts Measuring range: 0–32 % Scale division: 0.2 % Special features Adjustable eyepiece For quick control of coolants, cutting fluids and lubricants Ensures optimal emulsion concentration Contributes to longer tool life and rust prevention Emulsion variation possible in line with TRGS-611 FAQ What measuring range does the device cover? The ARIANA hand refractometer covers a 0–32 % range, suitable for most workshop coolant and lubricant concentrates. How fine is the measurement resolution? Readings are shown with a 0.2% scale division, allowing detection of small changes in emulsion concentration for proactive adjustment. Can this instrument help to extend tool life? Yes, consistent monitoring with this hand refractometer supports correct emulsion levels, which contributes to longer tool life and reduced wear. Is the device straightforward to use on the shop floor? The portable design with an adjustable eyepiece makes the instrument easy to focus and read under typical workshop conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 St. TRGS 611 Nitrate Test Strips 0-500 mg/L, Packaged Dose - ARIANA
Take advantage of reliable, standards-oriented monitoring with a compact, ready-to-use set that combines regulatory compliance and clear measurement range. The TRGS 611 nitrate test strips 0–500 mg/l, 100 per can (ARIANA) deliver measurable results for safety and monitoring measures and are available for order via Metav Werkzeuge or by consulting the Metav team for technical guidance. TRGS 611 nitrate test strips 0–500 mg/l, 100 per can (ARIANA) A set of TRGS 611 nitrate test strips designed for routine safety and monitoring tasks, offering a clear measuring range and convenient packaging for workshop or site use. For protection and monitoring per TRGS 611 Measuring range 0–500 mg/l nitrate 100 strips per can Compact can for secure storage Compliance support for occupational monitoring The measurement set supports compliance with TRGS 611, making it suitable for mandated protection and monitoring measures in industrial and laboratory environments. The clear measuring range of 0–500 mg/l provides a defined scope for routine checks and documentation. By aligning detection capability with the regulation, the strips enable straightforward integration into existing safety procedures and logbooks while helping to demonstrate adherence to statutory monitoring requirements. Practical handling and interpretation on the shop floor Each can contains 100 strips, supplied for multiple inspections and repetitive sampling. The design focuses on ease of use for technicians and safety officers: a compact can reduces contamination risk during storage and keeps consumables organised on-site. Colour comparison steps are compatible with standard workplace recording methods, allowing measurement results to be transferred into quality records without additional instrumentation, which streamlines daily monitoring tasks. Operational benefits and efficiency gains Using these test strips reduces the need for complex analytical setups for routine nitrate checks, saving time and lowering process overhead. The defined measurement span ensures that results are actionable within common regulatory thresholds, allowing managers to prioritise mitigation when concentrations approach critical values. This pragmatic approach supports faster decision-making and contributes to a safer working environment through regular, repeatable measurements. Where these strips fit into a safety system The strips are intended for routine surveillance rather than high-precision laboratory analysis; they form a first-line screening tool within a broader control strategy. Stored and handled correctly, the set provides a consistent supply for on-site surveillance programmes and incident checks. When a quantitative laboratory result is required, positive strip findings can be followed up with accredited analysis to confirm concentrations beyond the screening range. For compliant nitrate monitoring under TRGS 611 and supply from Emmerich, contact Metav Werkzeuge for technical advice and prompt delivery: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 4522222007NW Product type: TRGS 611 nitrate test strips Brand: ARIANA Packaging unit: can Facts Measuring range: 0–500 mg/l Content: 100 strips Packaging: can SKU: 4522222007NW Net price (for reference): 41.95 Special features For protection and monitoring measures according to TRGS 611 Suitable for routine safety checks and surveillance Compact storage can for site use FAQ How should the strips be used for TRGS 611 monitoring? The TRGS 611 nitrate test strips from ARIANA are intended as a screening tool for protection and monitoring measures; dip a strip, compare the colour to the reference and record the result against the 0–500 mg/l scale. How many measurements does one can provide? One can contains 100 strips, which allows for numerous routine checks and short-term monitoring campaigns before replenishment is needed. Are these strips suitable for laboratory certification purposes? These strips are designed for on-site screening and routine surveillance; for certified quantitative analysis, follow-up with an accredited laboratory is recommended after a positive or borderline strip result. Can the strips indicate concentrations above 500 mg/l? The indicated measuring range is 0–500 mg/l; concentrations above this range will not be quantified by the strips and should be confirmed by laboratory analysis. What documentation is available to show compliance? Results obtained with the ARIANA TRGS 611 nitrate test strips can be entered into internal monitoring records to demonstrate routine surveillance; for formal compliance documentation, combine strip results with laboratory confirmations where required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 Sticks pH Test Strips 7.0–14.0 for TRGS 611 Compliance, Dose - ARIANA
Take advantage of the combination of regulatory compliance, practical on-site monitoring and compact packaging for consistent safety checks; order directly via Metav Werkzeuge or consult our specialists for implementation advice. ARIANA pH indicator sticks TRGS 611 — pH range 7.0–14.0, 100 per can A ARIANA pH indicator sticks TRGS 611 set for quick on-site verification of alkaline conditions, designed for protective and monitoring measures in accordance with TRGS 611 Compliance-tested for TRGS 611 pH detection range 7.0–14.0 100 test strips per sealed can Fast, easy-to-read colour change Ensure compliance with TRGS 611 through simple on-site testing These pH indicator strips are supplied for use in protective and monitoring measures as specified in TRGS 611, enabling straightforward verification of alkaline media. The test sticks offer a clear, graded colour response that maps to the pH range 7.0–14.0, which supports legal documentation and routine safety checks. For users unfamiliar with TRGS 611: it sets practical requirements for handling corrosive liquids and monitoring neutralisation processes, so a rapid chemical indicator provides an immediate, traceable control point in the safety workflow. Rapid checks that save time and support operational decisions The compact format provides 100 test strips in a single sealed can, ideal for repeated sampling on-site. Results appear as a quick colour change, allowing maintenance teams and safety officers to assess whether an effluent or neutralisation step has reached the expected alkaline threshold without laboratory turnaround. The immediate visual feedback reduces downtime, supports faster corrective action and integrates into routine inspections, making the process both efficient and pragmatic for industrial environments. Durable packaging and straightforward storage for workshop use A robust tin and sealed closure protect the test sticks from moisture and contamination, extending practical usability on the workbench or in the field. The packaging keeps the indicators ready for use and simplifies inventory management for facilities carrying out regular monitoring. Clear labelling and compact storage help maintain traceability for compliance audits while reducing the risk of compromised samples, which is essential for reliable safety routines in workshops and processing sites. Practical application guidance for a wide range of teams Maintenance personnel, environmental officers and quality technicians benefit from a solution that provides an immediate screening method for alkaline conditions during process control, waste treatment and vehicle maintenance wash-offs. The test strips supply a clear visual result suitable for logging in inspection records and for deciding whether further analysis is required. For more complex cases or where numerical pH precision is critical, the strips serve as a fast screening tool before laboratory confirmation. For dependable TRGS 611 monitoring choose ARIANA pH indicator sticks and contact Metav Werkzeuge for purchasing guidance and rapid dispatch from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4522222009NW Product: pH indicator strips TRGS 611 Manufacturer: ARIANA Packaging: can Content: 100 strips Core data Measurement range: 7.0–14.0 pH Packaging unit: 1 Special features For protection and monitoring measures according to TRGS 611 Execution: pH value indicator Fast colour-change readout FAQ Are these test strips suitable for TRGS 611 monitoring? Yes. The ARIANA pH indicator sticks are supplied for protective and monitoring measures in line with TRGS 611 and are intended as a field screening method. How is the result read from the strips? A colour change appears on the indicator sticks that corresponds to the pH scale; the ARIANA strips cover the alkaline range and provide a quick visual assessment between pH 7.0 and 14.0. How many strips are included and how are they stored? The product contains 100 test strips in a sealed can to protect against moisture and contamination, easing storage and inventory control in the workshop. Can the strips replace laboratory pH measurement? The strips are intended as a rapid screening tool to support operational decisions; for precise numerical pH values or legal reporting, laboratory instruments should be used to confirm results. What is the article number for ordering and reference? The article number is 4522222009NW for the ARIANA pH indicator sticks TRGS 611. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 Test Sticks TRGS 611 Nitrite Nitrate pH Water Hardness Set, For Monitoring - ARIANA
Take advantage of fast, compliance-focused monitoring with test strips for nitrite, nitrate, pH and water hardness supplied as a practical set of 100 per parameter; the combination of straightforward handling and proven suitability for protection and monitoring measures under TRGS 611 supports reliable routine checks — order via Metav Werkzeuge or consult the specialists for tailored advice. Test strips TRGS 611 ARIANA — nitrite, nitrate, pH, water hardness (set) The Test strips TRGS 611 ARIANA are intended for practical on-site monitoring of aqueous samples and for protection and surveillance measures in accordance with TRGS 611. For TRGS 611 compliance monitoring Includes tests for nitrite and nitrate Measures pH and water hardness Dependable compliance checks reduce testing complexity These test strips deliver a pragmatic solution for routine chemical surveillance where conformity to TRGS 611 is required. The kit comprises a set with 100 test sticks per parameter, which makes it suitable for scheduled checks and frequent spot testing. By translating chemical presence into immediate, visible indications for nitrite, nitrate, pH and water hardness, the kit streamlines documentation efforts and helps maintain traceable monitoring practices. The clear parameter focus supports decision-making in health-and-safety procedures and maintenance planning. Rapid indication for efficient routine monitoring Colour-change strips provide a quick assessment that aids operational efficiency: results appear instantly and enable rapid segregation of samples that need laboratory confirmation. For workplaces that require repetitive checks, the evaluation method cuts down inspection time while preserving the integrity of procedural records. The labelling and grouping in the kit simplify stock management, so routine controls remain consistent and auditable without complex instrumentation. Practical format for storage and operational use Supplied as a compact set, the test sticks are arranged for immediate use during site rounds or in small laboratory environments. The format supports regular inventory replenishment and predictable consumption patterns thanks to the standardised 100 units per test parameter. Clear identification of the tested characteristics—nitrite, nitrate, pH, water hardness—ensures compatibility with existing control plans and simplifies the introduction of these checks into established workflows. For bespoke supply quantities, expert guidance on implementing TRGS 611-compliant monitoring or immediate order processing, contact Metav Werkzeuge for specialist advice and prompt fulfilment via info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: 4522222010NW Product: Test strips TRGS 611 Brand: ARIANA Pack: Set Facts Content: 100 per test Packaging unit: 1 Special features For protection and monitoring measures according to TRGS 611 Tests: nitrite, nitrate, pH, water hardness FAQ Are these test strips suitable for monitoring in accordance with TRGS 611? Yes. The Test strips TRGS 611 ARIANA are designed specifically for protection and monitoring measures under TRGS 611 and are supplied as a set for routine checks. Which parameters are covered by the kit? The set includes test sticks for nitrite, nitrate, pH and water hardness, providing straightforward qualitative indications for each parameter. How many test strips are included in one set? Each set contains 100 test strips for each measured parameter, arranged for regular monitoring and predictable stock rotation. Are the strips suitable for frequent spot checks in industrial workshops? The format and parameter range make the strips well suited to frequent spot checks and routine surveillance rounds, supporting rapid decisions and follow-up laboratory analysis when required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 Test Strips TRGS 611 Nitrite 0-25 mg/L Dose - ARIANA
Reliable nitrite monitoring matched to legal requirements and everyday workshop routines: the combination of TRGS 611 compliance, a clear 0–25 mg/l detection range and practical packaging ensures consistent safety checks. Order the test sticks directly via Metav Werkzeuge or consult the team for application advice. Test sticks TRGS 611 Nitrite 0–25 mg/l (ARIANA) The Test sticks TRGS 611 are colourimetric nitrite test sticks intended for routine monitoring and protective measures in line with TRGS 611 requirements Compliant with TRGS 611 for safety monitoring Detection range 0–25 mg/l nitrite Resealable can containing 100 test sticks Fast, standard-compliant checks for nitrite control The test sticks deliver a rapid, observable indication of nitrite concentration within the 0–25 mg/l range, allowing straightforward compliance checks during routine inspections. Designed for use in occupational safety and monitoring contexts, the strips support documented control processes specified under TRGS 611. The clear measuring range and standardised colour steps enable quick decision-making, reducing downtime and helping to maintain regulatory conformity. Simple handling and unambiguous results for everyday use Handling is optimised for repetitive sampling: each stick gives a discrete reading and is intended for single-use to avoid cross-contamination. Colour changes correspond to defined concentration steps, so interpretation remains consistent across users with basic training. For laboratories and workshop teams that require repeatable, comparable checks, these nitrite sticks offer a reliable method to detect deviations early and trigger further analysis or corrective measures when necessary. Practical packaging and reliable supply for operational continuity Supplied in a resealable can with 100 test sticks, the format supports controlled storage and convenient access on site. The packaging minimises exposure to ambient moisture, preserving reagent performance between uses. As part of a broader safety strategy, the sticks are a cost-effective consumable for regular surveillance rounds and emergency checks, ensuring that protective measures remain documented and traceable. For reliable nitrite monitoring choose the ARIANA TRGS 611 test sticks and procure directly from Metav Werkzeuge — contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored guidance and fast delivery Technical data Article number: 4522222006NW Product: Test sticks TRGS 611 Brand: ARIANA Pack type: Can Content: 100 test sticks Measuring range: 0–25 mg/l Execution: Nitrite level test sticks Pack unit: 1 Facts Measuring range: 0–25 mg/l Content per can: 100 test sticks Pack unit: 1 Special features Intended for protective and monitoring measures per TRGS 611 Colourimetric single-use sticks Resealable can for storage FAQ What measuring range do the test sticks cover? The test sticks measure nitrite concentrations in the 0–25 mg/l range, suitable for routine checks and initial assessments. Are these suitable for monitoring according to TRGS 611? Yes, the test sticks are intended for protective and surveillance measures in accordance with TRGS 611, supporting compliance workflows. How many sticks are supplied in one pack? One resealable can contains 100 test sticks, supplied as a single pack unit. How are results read and recorded? Results are read by comparing the stick’s colour change to the reference interpretation scale provided with the test material; entries can then be recorded in the site log for traceability and potential follow-up testing. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 Tests Water Hardness Test Strips 0-28 °dH For TRGS 611 Protective Measures - ARIANA
Take advantage of precise, standards-aligned testing and practical packaging to keep monitoring efficient and compliant; the combination of clear 0–28 °dH measurement, TRGS 611 conformity and sealed storage supports routine checks without unnecessary waste. Order through Metav Werkzeuge or contact the team for tailored advice. Test strips TRGS 611 — Water hardness test strips, 0–28 °dH, 100 per can (ARIANA) A set of Test strips TRGS 611 for quick visual assessment of water hardness in line with TRGS 611, suitable for monitoring and protective measures in technical facilities and maintenance routines Compliant with TRGS 611 safety requirements Measures water hardness 0–28 °dH 100 test strips per can for routine checks Sealed can for safe storage and long life Compliance that reduces risk and documents safety The Test strips TRGS 611 are developed to support protective and monitoring measures in accordance with TRGS 611. By providing a direct colour comparison across a 0–28 °dH scale, the strips enable rapid, reproducible checks that help verify water hardness levels for process control and occupational safety. The clear numeric range and standardised colour chart make results comparable across shifts and sites, supporting documentation and internal audits while reducing uncertainty during routine inspections. Fast, practical results for everyday decision-making Designed for immediate interpretation, the strips offer a quick visual check that translates chemical conditions into actionable information. A brief dip and colour match yields a hardness value expressed in degrees German hardness (°dH), a unit commonly used in industry to assess scaling risk and dosing requirements. This simplicity shortens reaction times for maintenance teams and makes it easier to decide on descaling, softening or chemical treatment steps without delay, improving operational efficiency. Packaging and handling geared to workshop workflows Supplied in a sealed can with 100 test strips per can, the packaging is optimised for frequent use in workshops, laboratories and plant maintenance. The can protects the strips from moisture and contamination, prolonging shelf life and ensuring consistent performance over time. The compact format fits store cupboards and mobile service kits, enabling on-site checks during routine rounds and minimising interruptions to production. Suitable applications and clear advantages for teams These strips are particularly useful for facilities maintenance, water treatment monitoring and safety officers who require a cost-effective, repeatable method for hardness screening. The product supports preventive maintenance plans by identifying hardness variations early, helping to avoid scale-related damage and increased energy consumption. With straightforward handling and reliable results, the test strips integrate into existing quality routines and support documented compliance efforts. For procurement and technical advice regarding ARIANA test strips or to discuss TRGS 611-compliant monitoring solutions, contact Metav Werkzeuge — email info@metav-werkzeuge.com or call +49 2822 7131930 for prompt assistance Technical Data Article number: 4522222008NW Product: Test strips TRGS 611 Brand: ARIANA Packaging: Can Facts Content: 100 test strips Measuring range: 0–28 °dH Packaging unit: 1 Special features For protective and monitoring measures per TRGS 611 Sealed can for storage protection Quick visual colour comparison for hardness FAQ How are the strips used to measure hardness? A single strip is briefly dipped into the water sample and compared to the enclosed colour chart; the ARIANA Test strips TRGS 611 indicate hardness on the 0–28 °dH scale for immediate interpretation. Can these strips be used to meet TRGS 611 monitoring requirements? Yes, the ARIANA test strips are specified for monitoring and protective measures in line with TRGS 611 and are suitable for routine checks required by that guidance. What does 0–28 °dH mean for daily maintenance? The 0–28 °dH range shows water hardness from very soft to quite hard; values toward the upper end signal an increased risk of scaling and may prompt descaling or softening actions. How should the can be stored and what is the expected shelf life? Keep the sealed can closed and stored dry at room temperature; the packaging protects strips from humidity, which helps preserve accuracy for routine use. Is this product suitable for field testing or only laboratory use? The compact can and simple dip-and-compare procedure make the strips suitable for both field testing and in-house laboratory checks for operational monitoring. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
150mm Cold Air Nozzle Up To -30°C / Up To 60°C, 3/8" Thread, 3–8 Bar - ARIANA
Take advantage of precise, lubricant-free spot cooling and flexible installation combined with easy adjustment for consistent process results; order the unit directly via Metav Werkzeuge or consult our specialists for configuration advice. ARIANA b.ca.-30°C Cold Air Nozzle – adjustable cold output, 3/8" thread The ARIANA b.ca.-30°C Cold Air Nozzle provides targeted cooling for metal and plastic components on machine tools where liquid coolants are undesirable. Targeted cooling down to −30°C Operates on compressed air, 3–8 bar Adjustable volume flow and cold-air ratio Precision cooling where liquids are not an option The nozzle delivers focused point cooling for machining and finishing operations, enabling rapid temperature reduction without introducing fluids. Driven by compressed air at 3–8 bar, the device produces a cold stream reaching approximately −30°C, making it suitable for temperature-sensitive tasks on both metal and plastic components. The absence of mist or coolant prevents contamination of parts and fixtures, supporting quality-critical production and cleaner downstream processes. Reliable temperature separation through the vortex tube principle Using the vortex tube principle, the unit separates compressed air into two counter-rotating streams that exit as distinct hot and cold flows. The cold-air outlet appears on the blue side, while the red side emits the warm exhaust; the hot stream may reach up to 60°C. A simple set screw controls both the volume flow and the cold-air proportion, allowing precise adaptation of cooling intensity for repeatable results and reduced cycle variation. Flexible mounting and practical accessories for quick deployment Connection is provided via a 3/8" thread, and the nozzle is supplied with practical accessories for rapid integration: the ARIANA Cool-Line system (½"), a magnetic plate, a ball valve, a threaded nipple for quick coupling, and a silencer. These components enable easy repositioning and vibration-resistant mounting, while the silencer reduces acoustic impact during continuous operation, improving the working environment on the shop floor. Operational advantages that support productivity and process integrity The equipment minimises the need for cleaning and rework by avoiding liquid contamination and offers localised thermal control to limit thermal distortion and maintain tight tolerances. With both cold and hot streams available, the nozzle can assist in temperature equalisation as well as rapid cooling, supporting versatile workflows in workshops and toolrooms. The combination of adjustable output and robust accessory options supports efficient integration into existing pneumatic systems and helps maintain consistent part quality. For targeted cold-air solutions from ARIANA, request supply or technical advice from Metav Werkzeuge — supplied from Emmerich with specialist support; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4522222000NW Manufacturer: ARIANA Product type: Cold air nozzle Connection thread: 3/8" Packaging unit: 1 Facts Operating pressure: 3–8 bar Cold air temperature: up to −30°C Hot air temperature: up to 60°C Special features Point cooling of metal and plastic parts at machine tools Suitable where no lubricants/coolants are desired Generates both cold and hot air via vortex tube principle Cold-air outlet: blue component Hot-air outlet: red component Adjustable volume flow and cold-air proportion via set screw Accessories: ARIANA Cool-Line system (½"), magnetic plate, ball valve, threaded coupling nipple, silencer FAQ What pressure is required for correct operation? Operation requires compressed air at 3–8 bar; the ARIANA cold air nozzle performs reliably within this pressure range. Which materials can be cooled with this nozzle? The nozzle is designed for point cooling of metal and plastic parts on machine tools where liquid coolants are unsuitable. How is the cold output adjusted? Adjustment is via a set screw that controls volume flow and the cold-air ratio to fine-tune cooling intensity for the task. Does the nozzle produce both cold and hot air? Yes — the device separates air into cold and hot streams; the cold exits at the blue outlet and the hot at the red outlet, with the hot stream reaching up to 60°C. What accessories are included for installation? Included are the ARIANA Cool-Line system (½"), a magnetic plate, ball valve, threaded nipple for quick coupling, and a silencer; SKU 4522222000NW identifies this configuration. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Emulsion Maintenance Kit 100 Test Strips TRGS 611 Compliance, Complete Contents - ARIANA
Take advantage of a TRGS 611‑compliant, complete emulsion maintenance kit that combines precise monitoring with a structured maintenance plan for reliable fluid management; order via Metav Werkzeuge or consult our specialists for tailored advice. Emulsionspflegekoffer n.TRGS 611 ARIANA — Emulsion maintenance kit, TRGS 611 compliant, complete contents The Emulsionspflegekoffer n.TRGS 611 ARIANA is a compact, workshop-ready kit for routine monitoring and care of metalworking emulsions, designed to support safe handling and extend coolant life in industrial and craft environments. TRGS 611 compliant monitoring kit Includes 100 test strips per parameter Complete kit with maintenance plan Ready for immediate workshop use Meet regulatory requirements and reduce operational risk Compliance with TRGS 611 is central to safe coolant handling and environmental protection. The kit supports adherence to legal and internal safety standards by providing validated test strips and clear guidance. Regular checks reduce the risk of microbial growth, odours and deteriorating performance, thereby protecting operators and machines. Using a standardised procedure also simplifies audit trails and workplace documentation, which benefits health and safety officers and quality managers. Fast, precise assessment of emulsion condition This set contains nitrite, nitrate, water hardness and pH test strips (100 pieces each), plus three empty/spray bottles, a measuring cup and a thermometer for on‑the‑spot checks. The combination of pH and ionic tests enables early detection of contamination or dilution, while temperature measurement helps interpret readings correctly. Clear visual indicators on the strips allow for quick decisions: treat, top up, or replace the emulsion. The result is fewer production interruptions and more predictable tool life. Practical maintenance planning that saves time and costs Delivered with an instruction manual and a structured maintenance plan, the kit turns irregular testing into a simple routine. Scheduled checks based on the maintenance plan help extend emulsion lifetime and reduce disposal frequency. The complete contents mean no additional purchases are required to begin a monitoring regime immediately, supporting efficient integration into existing maintenance cycles and lowering total operational cost through improved fluid performance. For TRGS 611‑level emulsion care and full workshop support, order the ARIANA emulsion maintenance kit through Metav Werkzeuge — Metav Werkzeuge GmbH in Emmerich can advise on integration into existing processes and supply the kit promptly. Technical data Article number: 4522222011NW Manufacturer: ARIANA Product type: Emulsion maintenance kit Version: in accordance with TRGS 611 Packaging unit: 1 Facts Test strips: nitrite, nitrate, water hardness, pH — 100 pieces each Bottles: 3 empty / spray bottles Accessories: measuring cup, thermometer Documentation: instruction manual and maintenance plan Content status: complete Special features Ready for immediate workshop use Enables routine chemical and temperature checks Supports regulatory compliance and documentation Designed for industrial and craft applications FAQ What parameters can be tested with this kit? The kit allows testing of nitrite, nitrate, water hardness and pH using the included test strips, plus temperature using the supplied thermometer to ensure correct interpretation of results. How many test strips are included for each parameter? Each parameter is supplied with 100 test strips, giving an immediate capacity for frequent routine checks and ongoing monitoring before reordering is necessary. Is the kit suitable for industrial metalworking workshops? Yes, the Emulsion maintenance kit is designed for industrial and craft environments and supports TRGS 611‑level monitoring to maintain coolant performance and workplace safety. Does the kit include instructions for use and a maintenance schedule? The set includes a clear instruction manual and a maintenance plan, enabling straightforward implementation of regular checks and documented routines. Can the test results guide corrective action for emulsions? Test readings for pH, nitrite, nitrate and hardness, together with temperature data, provide actionable information to decide on treatment, top‑up or replacement, reducing unscheduled downtime. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Spänehaken L.500mm Ku.-Griff Griff-L.90mm Schutzschild-D.130mm
mit Schutzschild · konisch auslaufend auf 2 mm am Hakenende · 8 mm Ø am Schutzschild · mit Kunststoffgriff 90 mm · Gesamtlänge 590 mm Weitere technische Eigenschaften: · Haken-Ø: 8mm · Schutzschild-Ø: 130mm · Grifflänge: 90mm · Griffausführung: Kunststoffgriff
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com