10mm Quick-Change Insert SE 8mm Square For DIN 371 M10, L3 5mm L4 35mm - TECWERK
A compact, Size 2 quick‑change insert that secures DIN 371 M10 taps and transfers torque reliably via an 8 mm square shaft; ideal for modular tap holders in busy workshops. Order the unit directly via Metav Werkzeuge or consult the Metav team for application advice and stock availability. Quick-change insert SE 10 mm x 8 mm Size 2 for DIN 371 M10 (TECWERK) A Quick-change insert SE 10 mm x 8 mm Size 2 designed to retain DIN 371 M10 thread taps in quick‑clamping systems for efficient tap changes in production and maintenance environments Quick retention for DIN 371 M10 taps Torque transmission via 8 mm square shank Size 2 insert with 10 mm bore No safety coupling for simple assemblies Consistent thread quality through secure torque transfer The insert ensures reliable torque transmission by engaging the tapping tool via an 8 mm shaft square, which reduces slippage and contributes to repeatable thread quality in series operations. By retaining DIN 371 M10 taps in the quick‑clamping mechanism, the unit minimises axial play and supports consistent thread profiles across multiple cycles. This stability lowers rework rates and boosts overall process efficiency, making it suitable for workshops and light industrial production where predictable results are essential. Faster tool changes and modular integration for shop floors Designed for quick‑change systems, the insert speeds up tool swaps and shortens non‑productive time. The quick‑clamping retention principle holds the tap securely without additional fixtures, enabling rapid replacement and straightforward setup. The modular nature of the system means different inserts are available for various shank sizes, allowing existing holders to be adapted rather than replaced. This flexibility supports lean workflows and reduces inventory complexity in maintenance and production environments. Compact design that supports everyday workshop workflows With a compact footprint and defined interface dimensions, the Size 2 insert fits neatly into standard tap holders and contributes to ergonomic handling during repetitive tasks. The absence of a safety coupling simplifies the mechanical layout for applications where a positive mechanical fail‑safe is not required, while the clear torque path via the shaft square keeps the design robust under typical tapping loads. The TECWERK unit balances straightforward mechanics with practical benefits for machinists and service engineers who prioritise uptime. For tailored guidance on integrating the TECWERK Quick‑change insert into existing tap holders, contact Metav Werkzeuge in Emmerich for stock information and technical advice at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832644NW Product type: Quick-change insert SE Model: Quick-change insert SE 10 mm x 8 mm Size 2 for DIN 371 M10 Manufacturer: TECWERK Size: Size 2 Facts Diameter: 10 mm Square shank: 8 mm Packaging unit: 1 L1: 32 mm L3: 5 mm L4: 35 mm L5: 11 mm D: 48 mm D1: 31 mm Special features No safety coupling Retains thread taps via quick‑clamping device Torque transmission via shaft square Different inserts required for different shank sizes FAQ How does the insert secure DIN 371 M10 taps? The Quick‑change insert SE holds DIN 371 M10 thread taps in a quick‑clamping device, using the shaft square to ensure a secure mechanical engagement and minimise slippage. Is the insert compatible with other shank sizes? The unit is Size 2 and designed for an 8 mm square shaft; other shank sizes require the corresponding insert type to ensure proper fit and torque transfer. Does the insert include a safety coupling? This insert is supplied without a safety coupling; the design relies on positive retention and torque transfer through the shaft square for standard tapping operations. Can the insert be used in high‑volume production? Yes, the compact design and secure torque transmission make the insert suitable for repetitive workshop and light production use where rapid tool changes are required. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
10mm Quick-Change Insert SE 8mm Square Shank for DIN 371 M10, L3 4mm L4 21.5mm - TECWERK
Take advantage of fast, reliable tapping with a compact quick-change insert that transmits torque via an 8 mm shank square and fits DIN 371 M10 taps; the durable design and straightforward holding method keep changeovers efficient and production running smoothly. Order directly through Metav Werkzeuge or contact our consultants for application advice. Quick-change insert SE 10mm x 8mm Gr.1 for DIN 371 M10 – TECWERK The Quick-change insert SE 10mm x 8mm Gr.1 is a compact adapter for holding DIN 371 M10 taps in quick-change systems, designed to ensure consistent torque transfer and rapid tool swaps in workshop and production environments. Square shank drive 8 mm Designed for DIN 371 M10 taps Torque transmission via shank square Compact Gr.1 quick-change insert Reliable torque transfer for consistent tapping The Quick-change insert converts the drive of a quick-change holder into a secure interface for thread taps; torque transmission is effected via the shank square, which prevents slippage under standard operating loads and helps maintain thread quality. Because the insert is specified for DIN 371 M10, the mechanical fit is predictable and reproducible, reducing rejects and reworks. The absence of a separate safety coupling keeps the mechanical path direct, which can improve responsiveness during manual and machine-driven tapping operations without introducing additional backlash. Faster changeovers and predictable workflow The insert is held by the quick-clamping device of the holder, enabling rapid tool changes that reduce machine downtime and increase throughput. The design supports a streamlined setup routine: inserts for different shank sizes are available so that holders can be adapted quickly to the required tap geometry. This pragmatic approach to toolholding enhances operational efficiency and simplifies inventory management, as compatible inserts allow a single quick-change holder to cover several tap sizes when swapped as needed. Clear dimensions and compatibility for confident planning Critical dimensions are specified to aid integration: the adapter provides a 10 mm nominal diameter interface with an 8 mm square shank drive; key component lengths are L1: 18.5 mm, L3: 4 mm, L4: 21.5 mm and L5: 7 mm, while the external diameters are D: 30 mm and D1: 19 mm. These measured values support accurate fixture design and ensure the insert sits correctly in the quick-change system, so mechanical clearances and reach can be planned with confidence. The compact size of the Gr.1 insert also helps where access is limited, without compromising stability. Contact Metav Werkzeuge for tailored advice on TECWERK quick-change inserts and reliable supply from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832693NW Type: Gr.1 Product: Quick-change insert SE Brand: TECWERK Square shank: 8 mm Diameter: 10 mm Suitable for: DIN 371 M10 Packaging unit: 1 Core measurements D: 30 mm D1: 19 mm L1: 18.5 mm L3: 4 mm L4: 21.5 mm L5: 7 mm Special features without safety coupling inserts held by quick-clamping device torque transmission via shank square different shank sizes require different inserts FAQ Is this insert compatible with DIN 371 M10 taps? Yes. The Quick-change insert SE 10mm x 8mm Gr.1 is specified for use with DIN 371 M10 taps and provides the required mechanical fit for reliable tapping operations. Does the insert include a safety coupling? No. The insert is supplied without a safety coupling; torque is transmitted directly via the shank square for a compact and direct drive path. What shank size does the insert use? The adapter features an 8 mm square shank drive, which is the defined torque-transmission interface for this Gr.1 insert. Are different shank sizes available for the quick-change system? Different inserts are required for other shank sizes; the product range includes variants so that holders can be adapted to the tap and machine requirements. What is the article number for ordering and reference? The article number is 4000832693NW for the TECWERK Quick-change insert SE 10mm x 8mm Gr.1. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm Quick-Change Insert SES 8mm Square For DIN 371 M10 With Adjustable Safety Clutch, L3 30.5mm - TECWERK
Take advantage of the combination of adjustable safety coupling and robust torque transmission for fewer broken taps and smoother tapping cycles; order directly via Metav Werkzeuge or consult our specialists for application-specific advice. Quick-change insert SES 10mmx8mm Gr.2 (Quick-change insert SES) – TECWERK, adjustable safety coupling, suitable for DIN 371 M10 The Quick-change insert SES 10mmx8mm Gr.2 is a compact adapter designed to accept standard tapping shanks and to protect taps through an integrated torque-limiting coupling, intended for use with DIN 371 M10 taper taps in workshop and production settings Adjustable safety coupling for torque limitation Prevents tap breakage during operation Torque transmitted via shaft square Compatible with DIN 371 M10 taps Safer tapping thanks to a torque-limiting coupling The core advantage of this quick-change adapter is its adjustable safety coupling, which limits torque to reduce the risk of fracturing taps during interrupted cuts or misfeeds. By interrupting the drive when a preset torque threshold is reached, the coupling actively prevents tap breakage, protecting both the tool and the workpiece. This functionality supports measurable productivity gains: fewer tool changes and less rework, which directly improves process reliability in small-batch and serial tapping operations. Consistent power transfer via the shaft square for reliable results Power is transmitted through the shaft square, ensuring a direct, backlash-minimised connection that maintains rotational alignment under load. The insert is specified with a square drive of 8 mm and a tap interface of 10 mm, matching the DIN 371 M10 standard for taper hand taps. This direct drive reduces slippage and promotes uniform thread quality, making the adapter a practical choice where repeatable thread geometry is required across multiple components. Compact engineering to reduce downtime and protect tooling Designed as a quick-change solution, the adapter streamlines replacement cycles and decreases machine downtime. The unit’s compact dimensions (for example, D: 50 mm; L1: 32 mm) allow simple handling in workshop environments and facilitate storage with existing tooling racks. The result is a smoother workflow: fewer interruptions, reduced risk of damage to expensive taps and improved throughput for maintenance and production teams seeking robust yet affordable tapping protection. Clear installation practice and application scope Installation consists of seating the insert in the tool holder and setting the torque threshold appropriate to the tap and material. The adapter is intended for use with DIN 371 M10 taper taps and requires matching inserts for different shank sizes where applicable. The built-in coupling is adjustable to the workpiece and thread conditions, which is particularly useful when switching between mild steel and more challenging materials. For detailed setup parameters, follow the machine and tap manufacturer guidelines to ensure safe operation. Contact Metav Werkzeuge for tailored advice on integrating this TECWERK quick-change insert into existing tapping stations or to request application-specific recommendations – eMail: info@metav-werkzeuge.com, Tel: +49 2822 7131930 Technical Data SKU: 4000832694NW Manufacturer: TECWERK Product: Quick-change insert SES Type: Gr. 2 Suitable for: DIN 371 M10 Packaging unit: 1 Numbers / Core technical data Diameter: 10 mm Square drive: 8 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D: 50 mm L1: 32 mm D1: 31 mm Special features / Versions Adjustable safety coupling for torque limitation Prevents tap breakage Torque transmission via shaft square Requires different inserts for varying shank sizes FAQ What materials can be tapped with this insert? The quick-change insert is specified for use with taps to DIN 371 M10; material suitability depends on the chosen tap grade and cutting data rather than the adapter itself. How does the torque limitation work? The integrated adjustable safety coupling disengages when the preset torque is reached, protecting the tap from overload and reducing the risk of breakage when using the Quick-change insert SES 10mmx8mm Gr.2. Is the insert compatible with other shank sizes? Different inserts are required for varying shank dimensions; this SES variant fits the 8 mm square drive and is intended for DIN 371 M10 tooling. Can this adapter improve cycle time in production? By reducing tap breakage and simplifying tool changes, the adapter contributes to fewer interruptions and improved overall process uptime. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm Schnellwechseleinsatz SES Vierkant 8mm für DIN 371 M10 mit Sicherheitskupplung, L1 18,5mm L3 24,5mm L4 21,5mm L5 25,5mm D 32mm.
Schnellwechseleinsatz SES 10mmx8mm Gr.1 f.DIN 371 M10 — Schnellwechseleinsatz Der Schnellwechseleinsatz SES 10mmx8mm Gr.1 f.DIN 371 M10 ist ein Austauschwerkzeug für Gewindeschneider nach DIN 371 und sorgt durch seine einstellbare Sicherheitskupplung für kontrollierte Drehmomentbegrenzung im Fertigungsprozess Einstellbare Sicherheitskupplung reduziert Bruchrisiko Drehmomentübertragung über Schaft-Vierkant 8 mm Kompatibel mit Gewindebohrern nach DIN 371 M10 Kompakte Bauform, präzise Längenmaße für sicheren Halt Effiziente Bruchvermeidung durch integrierte Kupplung Die Sicherheitskupplung ist ein zentrales Merkmal dieses Einsatzes. Durch die einstellbare Drehmomentbegrenzung erfolgen Überlastungen kontrolliert, wodurch das Risiko eines Gewindebohrerbruchs deutlich sinkt. Das Ergebnis ist weniger Maschinenstillstand und geringerer Werkzeugverschleiß, was die Prozesssicherheit in der Werkstatt erhöht Präzise Kraftübertragung über Schaft‑Vierkant Die Drehmomentübertragung erfolgt über den Schaft‑Vierkant, was eine verlustarme Kraftübertragung gewährleistet und ein sicheres Einrasten des Werkzeugs ermöglicht. Für unterschiedliche Aufnahmen sind verschiedene Einsätze erforderlich, wodurch die Flexibilität in Produktionsumgebungen mit wechselnden Schaftmaßen steigt Kompatibilität und Abmessungen für den Werkstattalltag Der Einsatz ist speziell für Gewindeschneider nach DIN 371 M10 ausgelegt und kommt mit klar definierten Maßen wie L3: 24,5 mm und D: 32 mm, die stabilen Sitz und Wiederholgenauigkeit ermöglichen. Die kompakte Bauweise erleichtert das Handling und reduziert das Risiko von Kollisionen an engen Bearbeitungsstellen Für kompetente Beratung und schnelle Lieferung empfehlen wir, sich an Metav Werkzeuge zu wenden. Bei Fragen zu Einsatzkompatibilität oder technischen Details steht das Team gern per E‑Mail an info@metav-werkzeuge.com oder telefonisch unter +49 2822 7131930 zur Verfügung. Technische Daten Technische Daten Artikelnummer: 4000832671NW Marke: TECWERK Produktart: Schnellwechseleinsatz SES Typ: Größe 1 Fakten Durchmesser: 10 mm Vierkant: 8 mm L3: 24,5 mm L4: 21,5 mm L5: 25,5 mm D: 32 mm L1: 18,5 mm D1: 19 mm Besonderheiten mit einstellbarer Sicherheitskupplung für Drehmomentbegrenzung zur Vermeidung von Gewindebohrerbruch Drehmomentübertragung erfolgt über den Schaft‑Vierkant geeignet für DIN 371 M10 für unterschiedliche Schaftmaße sind verschiedene Einsätze erforderlich Verpackungseinheit: 1 FAQ Wie verhindert der Einsatz das Brechen von Gewindebohrern? Der Schnellwechseleinsatz SES von TECWERK nutzt eine einstellbare Sicherheitskupplung, die das Drehmoment bei Überlast reduziert und so Gewindebohrerbruch vorbeugt. Die kontrollierte Abschaltung schützt Werkzeug und Werkstück. Ist der Einsatz direkt mit Gewindebohrern nach DIN 371 M10 kompatibel? Ja, der Einsatz ist für Gewindebohrer nach DIN 371 M10 ausgelegt und überträgt das Drehmoment über den Schaft‑Vierkant, was eine sichere Verbindung garantiert. Welche Schaftgröße wird benötigt, und sind Alternativen verfügbar? Dieser Einsatz überträgt das Drehmoment über einen 8 mm Vierkant. Für andere Schaftmaße sind entsprechend ausgelegte Einsätze erforderlich; TECWERK bietet Varianten für unterschiedliche Aufnahmen. Welche Maße sind für die Planung relevant? Wichtige Maße sind L3 24,5 mm, D 32 mm und L1 18,5 mm; diese Daten dienen zur Prüfung der Einbaubedingungen und zur Auswahl passender Aufnahmen. Hersteller: NORDWEST Handel AG; Robert‑Schuman‑Straße 17; 44263 Dortmund
11mm Quick-Change Insert SE 11mm×9mm Gr.2 for DIN 374/376 M14, 5mm L3 - TECWERK
Benefit from rapid tool changes and reliable torque transfer: the insert combines a quick-change clamping interface with a 9 mm square shank and an 11 mm nominal diameter, making it suitable for taps to DIN 374/376 M14 and helping to reduce downtime. Order this quick-change insert directly via Metav Werkzeuge or ask our consultants if needed. Quick-change insert SE 11 mm x 9 mm Gr.2 — Quick-change insert for DIN 374/376 M14 taps, TECWERK A Quick-change insert SE 11 mm x 9 mm Gr.2 designed for secure retention of thread taps in quick-clamping systems, providing consistent engagement and simple integration into existing toolholders. Quick-change design for fast tool swaps Torque via 9 mm square shank Compatible with DIN 374/376 M14 taps No safety coupling for straightforward clamping Faster changeovers with dependable torque transfer The quick-clamp concept of this insert focuses on reducing non-productive time: the quick-change mechanism keeps the tap held firmly by the clamping device so that insert swaps can be completed noticeably faster than conventional collet setups. Torque is transmitted via the 9 mm square shank, which prevents slippage and ensures repeatable rotational force during tapping operations. This combination supports a smoother production flow and reduces the risk of thread errors caused by tool movement under load. Consistent thread quality through correct fit and retention Designed for use with taps to DIN 374/376 M14, the insert maintains axial and radial alignment during cutting, which helps to improve thread consistency across batches. The holding principle—taps secured in the quick-clamping pocket—reduces lateral play and contributes to improved concentricity. Because different shank dimensions require different inserts, the system philosophy promotes targeted selection of the correct insert to match the tap shank and the machine interface, avoiding mismatches that can lead to premature tool wear. Compact dimensions for straightforward workshop integration The insert’s compact geometry eases installation into standard quick-change toolholders and supports simple stock management. Key dimensions and lengths allow planners to verify fitment rapidly: the external diameters and lengths are adapted to common toolholder envelopes, while the absence of a safety coupling keeps the mechanical design straightforward and low-maintenance. This makes the insert suitable for retrofit situations as well as new tool assemblies, providing a practical balance of accessibility and mechanical reliability. For reliable tapping operations choose the TECWERK quick-change insert and contact Metav Werkzeuge for supply and application advice from Emmerich; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832645NW Manufacturer: TECWERK Product: Quick-change insert SE Type/Size: Größe 2 SKU/UID: 4000832645NW Packaging unit: 1 Suitable for: DIN 374/376 M14 Key measurements Diameter: 11 mm Square shank: 9 mm D: 48 mm D1: 31 mm L1: 32 mm L3: 5 mm L4: 35 mm L5: 11 mm Design / special features No safety coupling Inserts hold taps via quick-clamping device Torque transmission via shaft square Different inserts required for different shank sizes Intended for holding thread taps FAQ Which taps are compatible with this quick-change insert? The quick-change insert is specified for taps to DIN 374/376 M14 and is intended to hold thread taps that match that standard. How is torque transferred from the holder to the tap? Torque transmission is via the 9 mm square shank; this square drive on the insert ensures secure force transfer without slip during tapping. Does the insert include a safety coupling? No, the insert is supplied without a safety coupling; the design focuses on direct clamping and straightforward mechanical engagement. What should be considered when selecting a different insert size? Different tap shank dimensions require matching inserts; choose an insert that corresponds to the tap shank to maintain correct alignment and torque transfer. Is the insert suitable for retrofitting into existing quick-change systems? Yes, the compact dimensions and standardised interface make the insert suitable for integration into compatible quick-clamping toolholders and retrofit applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
11mm Quick-Change Insert SES 9mm Square, Adjustable Safety Torque Coupling, L3 24.5mm - TECWERK
Benefit from an adjustable safety clutch that limits torque to avoid tap breakage and a secure 9 mm square shank torque transmission compatible with DIN 374/376 M14; order the quick-change insert directly via Metav Werkzeuge or consult our specialists for integration advice. Quick-change insert SES 11 mm × 9 mm Gr.1 – adjustable safety clutch for DIN 374/376 M14 (TECWERK) The Quick-change insert SES 11 mm × 9 mm Gr.1 is a compact torque-limiting interface designed for M14 thread taps, enabling safer tapping operations and rapid tool exchange in production and workshop environments. Adjustable safety clutch for torque control Prevents thread tap breakage 9 mm square shank torque transmission Compatible with DIN 374/376 M14 taps Reduce tap breakage and keep production running The most immediate gain from an insert with an adjustable safety clutch is a measurable reduction in tap failures. By limiting the transmitted torque, the module protects the tap at the moment of thread jamming or sudden load peaks; this reduces unscheduled downtime and the need for costly rework. The torque is transferred via a square shank, ensuring a positive mechanical drive that minimises slippage and wear on the drive interface. For machine shops that run high volumes of tapping operations, the safety clutch converts into fewer production interruptions and more predictable cycle times. Seamless integration with standard tap toolchains Designed for compatibility with taps conforming to DIN 374/376 M14, this quick-change coupling slots into existing toolholders without major rework of the set-up. The insert’s modular approach means different shank sizes use matching inserts, preserving a standardised tool inventory while allowing the workshop to adapt to varying shank dimensions. Installation and replacement are straightforward, so the insert supports lean workflows and helps maintain throughput. The combination of precise torque limitation and a standardised interface enables controlled machining results and a consistent thread quality. Compact construction that speeds changeovers and protects tools A compact form factor reduces interference and simplifies handling during tool changes, which shortens non-productive time at the spindle. The design focuses on rapid exchange and robust torque transfer: the square drive transmits force reliably while the clutch disengages under overload, prolonging both tap life and the life of sockets and drive tools. The result is higher uptime, reduced tooling costs over time and a calmer planning horizon for maintenance cycles — benefits that add up in busy workshops and production lines. For a tailored recommendation on the TECWERK SES quick-change insert and assistance with selecting the correct shank size, contact Metav Werkzeuge — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: 4000832673NW Product: Quick-change insert SES Label: Quick-change insert SES 11 mm × 9 mm Gr.1 for DIN 374/376 M14 Manufacturer: TECWERK Facts Diameter: 11 mm Square shank: 9 mm L3: 24.5 mm L4: 21.5 mm L5: 25.5 mm D: 32 mm L1: 18.5 mm D1: 19 mm Packaging unit: 1 Special features Adjustable safety clutch for torque limitation Prevents thread tap breakage Torque transmission via shank square For use with DIN 374/376 M14 thread taps Different inserts required for other shank sizes FAQ Is the insert compatible with M14 taps to DIN 374/376? Yes. The Quick-change insert SES 11 mm × 9 mm Gr.1 is specified for taps conforming to DIN 374/376 M14 and transmits torque through a 9 mm square shank. How does the adjustable safety clutch reduce tap failures? The clutch disengages or slips at a preset torque, interrupting peak loads before a tap fractures; this mechanism on the SES insert protects the tap and connected drive components. Can the torque limit be adapted to different materials or tap sizes? Torque settings can be adjusted to suit common tapping scenarios, allowing optimisation for softer or harder workpiece materials and for varying thread sizes used with the SES insert. Are different inserts needed for other shank dimensions? Yes. The SES system uses inserts matched to the shank dimension; different square-shank sizes require the corresponding insert to ensure correct torque transmission. What dimensions should be checked before ordering? Verify the drive square (9 mm), the nominal diameter (11 mm), and the relevant length dimensions (L1, L3, L4, L5) to ensure compatibility with the toolholder and tap depth. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
11mm Quick-Change Insert SES 9mm Square, Adjustable Torque-Limit Coupling for DIN 374/376 M14 - TECWERK
Take advantage of precise torque control and a compact, service-friendly design to protect taps and reduce downtime; order directly via Metav Werkzeuge or consult the team for application advice. Quick-change insert SES 11 mm x 9 mm, Size 2 – adjustable safety coupling (TECWERK) Quick-change insert SES 11 mm x 9 mm Size 2 provides a torque-limiting adapter for thread tapping applications, designed for use with DIN 374/376 M14 taps and workshop toolholders Adjustable safety coupling for torque limitation Prevents tap breakage during threading Compatible with DIN 374/376 M14 taps 9 mm square drive for positive torque transfer Reduce tool breakage and maintain production flow The adjustable safety coupling built into this quick-change insert limits torque transmission when resistance rises unexpectedly, significantly reducing the risk of tap breakage. As a result, thread production becomes more reliable and less prone to costly stoppages; the mechanism disengages before a tap sustains irreversible damage, protecting consumables and avoiding rework. This measurable reduction in scrap and downtime translates into better throughput and lower total operating cost per threaded component. Precise torque control for consistent threads Torque is transferred through the 9 mm square drive, ensuring a positive, backlash-free connection between driver and tap shank; the torque-limiting element is adjustable to suit the thread size and material conditions. Because the torque is controlled mechanically rather than electronically, the system reacts instantly to overloads and maintains thread quality across batches. The result is repeatable, consistent threads with fewer rejects and a predictable process window for production planners and workshop engineers. Compact design that integrates with existing tooling With a compact footprint (D 50 mm, D1 31 mm, L1 32 mm) and a nominal diameter of 11 mm, the insert fits into common toolholders while keeping the working envelope small. The torque is transmitted over the shaft square, so different shank dimensions require corresponding inserts; this modular approach lets maintenance teams replace only the worn insert instead of the entire driver assembly. The compact size and standard interface simplify storage and logistics in busy workshops. Engineered for workshop practicality and safety The unit is supplied as a single-piece package and is intended for quick replacement when wear occurs. The mechanical limiting principle provides a clear operational advantage: fast recovery after an overload without complex reset procedures. Documentation and simple adjustment make the insert suitable for both production environments and skilled maintenance teams that demand robust, service-friendly components from a recognised supplier. For tailored advice on integrating the TECWERK SES quick-change insert into existing tapping stations, contact Metav Werkzeuge for specification support and ordering assistance. Product data Article number: 4000832679NW Product type: Quick-change insert SES Size: Size 2 Brand: TECWERK Suitable for: DIN 374/376 M14 Dimensions & core data Diameter: 11 mm Square drive: 9 mm L1: 32 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D: 50 mm D1: 31 mm Packaging unit: 1 Special features Adjustable safety coupling for torque limitation Torque transfer via shaft square Prevents tap breakage Requires matching inserts for other shaft sizes FAQ Which tap types are compatible with this quick-change insert? The quick-change insert SES 11 mm x 9 mm Size 2 is compatible with taps to DIN 374/376 M14 and designed to interface with standard tap shanks using the 9 mm square drive. How does the adjustable safety coupling work? The adjustable safety coupling in the TECWERK SES insert mechanically limits torque transmission; when the set torque is exceeded, the coupling slips to prevent damage to the tap and driver. Is a special driver required to use this insert? No special driver is required beyond a matching toolholder that accepts the SES interface and the 9 mm square drive; different shank sizes call for the corresponding insert variant. Can the torque setting be changed during operation? Torque adjustment is performed using the coupling mechanism; settings should be adjusted when the tool is stationary and according to workshop safety procedures. What dimensions should be checked before ordering? Verify the square drive (9 mm), the overall diameter (11 mm) and the key envelope dimensions (D 50 mm, L1 32 mm) to ensure compatibility with existing holders and clearance conditions. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
12mm Quick-Change Insert SE 9mm Square Shank for DIN 374/376 M16, L3 5mm L4 35mm - TECWERK
Take advantage of a compact, quick-change solution that combines fast tool swaps with positive torque transmission via a 9 mm square shank for reliable threading to DIN 374/376 M16. The robust Size 2 insert delivers consistent clamping geometry and clear dimensional data for planning tool setups. Order the quick-change insert directly via Metav Werkzeuge or ask our consultants if needed. Quick-change insert SE 12 mm × 9 mm, Size 2 for DIN 374/376 M16 (TECWERK) The Quick-change insert SE 12 mm × 9 mm, Size 2 is a dedicated holder for tapping applications to DIN 374/376 M16, designed for rapid tool exchange in production and workshop environments Rapid tool changes with quick-change design Torque transmission via 9 mm square shank Compatible with DIN 374/376 M16 threading tools Clear dimensional data for process planning Efficient threading operations through fast changeovers The quick-change insert is engineered to reduce non-productive time by enabling fast replacement of threaded tools. With a defined 12 mm diameter interface and a 9 mm square shank, the insert provides stable seating for taps held by the quick-clamping mechanism. This results in shorter set-up times and higher machine utilisation, making it suitable for repetitive threading tasks in small-batch production as well as larger runs. Secure torque transmission for consistent thread quality Because the torque transmission is effected via the shaft square, the load is transferred positively and predictably to the tap. The design operates without a safety coupling, so torque is transmitted directly through the square shank; this ensures repeatable torque behaviour and consistent thread form when used with compatible tapping tools to DIN 374/376 M16. Users benefit from precise power transfer that supports reproducible quality in each cycle. Clear dimensions and measurable specification for process planning Detailed dimensional values support integration into tool lists and CAD fixtures. Key lengths and diameters are provided to facilitate fixture design, collision checks and inventory management. The compact footprint and the standardised interface simplify spare-part planning and make this insert straightforward to specify alongside existing toolholders and machine setups in workshops and production cells. Designed for workshop compatibility and flexible shank options The insert requires matching shank sizes for different toolholder variants, enabling a modular approach to tap holding. The construction allows taps to be retained by the quick-clamping device, while the square shank provides the positive drive. This modularity supports mixed tooling strategies and reduces the number of complete holders required, improving capital efficiency for maintenance and toolroom planning. For precise threading with TECWERK quick-change inserts, contact Metav Werkzeuge for tailored advice and reliable supply — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss compatibility with existing tooling and order fulfilment Technical data Article number: 4000832646NW Type: Size 2 Diameter: 12 mm Square shank: 9 mm Suitable for: DIN 374/376 M16 Packaging unit: 1 Numbers / Core technical data L3: 5 mm L4: 35 mm L5: 11 mm D: 48 mm L1: 32 mm D1: 31 mm Special features / Versions without safety coupling inserts held by quick clamping device torque transmission via shaft square different inserts required for different shank sizes FAQ What tap standards is the insert compatible with? The quick-change insert is designed for tapping tools conforming to DIN 374/376 M16 and provides the standard interface for secure clamping and drive. How is torque transmitted to the tap? Torque is transmitted via the 9 mm square shank; the design transfers drive positively without a safety coupling for repeatable torque behaviour. Can the insert be used with different shank sizes? Different inserts are required for different shank sizes; the product supports a modular approach where matched inserts are selected for the corresponding shank. Which dimensions are critical for fixture integration? Key dimensions such as L1, L3, L4, D and D1 are provided to assist with fixture planning and collision checks when integrating the insert into a toolholding system. Is a safety coupling included with this insert? No, this insert is supplied without a safety coupling; torque is delivered directly through the square shank, which should be considered in process risk assessments. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
12mm Quick-Change Insert SES 9mm Square, Adjustable Torque Safety Clutch, L3 30.5mm - TECWERK
Take advantage of a combination of precise torque control and rapid tool changes to reduce tap breakage and downtime; the adjustable safety clutch and 9 mm square torque transfer ensure consistent performance—order via Metav Werkzeuge or consult their specialists for fitment advice. Quick-change insert SES 12mmx9mm Size 2 for DIN 374/376 M16 — TECWERK, adjustable safety clutch The Quick-change insert SES 12mmx9mm Size 2 is a compact tap adaptor designed for tapping operations to DIN 374/376 M16, providing torque limitation and fast interchangeability for production and workshop environments. Adjustable safety clutch for torque limiting Prevents tap breakage under load Torque transfer via 9 mm square shank Compatible with DIN 374/376 M16 taps Consistent torque control reduces breakage and waste The central advantage of the insert is its adjustable safety clutch, which provides reliable torque limitation during tapping operations. By disconnecting or slipping at a preset torque threshold, the mechanism protects cutting tools from sudden overloads and the costly consequences of broken taps. This mechanical safeguard translates directly into fewer interrupted production cycles and lower consumable costs. The clutch design transmits rotation through the 9 mm square shank, ensuring predictable power transfer while the torque cap prevents excessive stresses that typically lead to tool failure. Exact fit and clear dimensions for simple integration Compatibility is assured through adherence to DIN standards: the adaptor is intended for taps to DIN 374/376 M16 and matches shafts via the 9 mm square interface. Key measurements support straightforward integration into existing tool sets: L3: 30.5 mm, L4: 35 mm, L5: 34 mm, D: 50 mm, L1: 32 mm, D1: 31 mm. These dimensions permit planners and technicians to verify clearance and reach without lengthy trials. The quick-change format simplifies swapping between holders and spindles, reducing non-productive time and supporting a faster tool-change rhythm on the shop floor. Practical benefits for workshop efficiency and process reliability Designed for repeatable performance, the insert brings measurable gains in workshop efficiency: faster tool changes, reduced scrap from damaged threads, and lower maintenance frequency. The torque is transmitted over the shaft square for a secure drive link, while the clutch function mitigates the risk of tap fracture when encountering misfeeds or hardened inclusions. For varied shank standards, matching inserts are available to maintain the same safety and interchange benefits across different machines. Metav Werkzeuge supplies technical guidance and reliable delivery from Emmerich, helping to ensure the part fits the intended tapping application and production workflow. For tailored advice on compatibility or to secure supply of this TECWERK quick-change insert from Metav Werkzeuge, contact Metav Werkzeuge directly for product matching and guaranteed availability from their Emmerich quality hub Technical data Article number: 4000832680NW Product: Quick-change insert SES Brand: TECWERK Type: Size 2 Diameter: 12 mm Square shank: 9 mm Suitable for: DIN 374/376 M16 Packaging unit: 1 Measurements L3: 30.5 mm L4: 35 mm L5: 34 mm D: 50 mm L1: 32 mm D1: 31 mm Special features Adjustable safety clutch for torque limitation Torque transmission via shaft square Prevents tap breakage Quick-change format for rapid tool swaps Requires matching inserts for different shaft sizes FAQ What is the main function of this quick‑change insert? The quick‑change insert SES 12mmx9mm Size 2 from TECWERK limits torque via its adjustable safety clutch to protect taps and enable rapid tool changes in tapping applications. Which tap standards does this insert support? The insert is designed for tapping to DIN 374/376 M16 and interfaces via a 9 mm square shank for standard drive connections. How does the safety clutch benefit production? By capping torque, the clutch prevents sudden overloads and tap fracture, reducing downtime and consumable costs associated with broken taps. Are the dimensions sufficient for machine integration? The provided dimensions (L3, L4, L5, D, L1, D1) allow verification of clearance and fit; these values support fast integration into existing tooling setups. Is a different insert required for other shaft sizes? Yes, the torque is transferred via the shaft square and different shaft measurements require the corresponding insert size for correct fit and operation. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
14mm Quick-Change Insert SE 14mm x 11mm Gr.2 for DIN 374/376 M18, 5mm L3, 35mm L4 - TECWERK
Reliable tap retention combined with precise torque transfer and compact sizing ensures stable thread production and quicker changeovers; the quick‑change insert is therefore a pragmatic choice for workshops seeking consistent results. Benefit from its compatibility with DIN 374/376 M18, the 14 mm seat and 11 mm square shank for secure torque transmission. Order the insert directly via Metav Werkzeuge or ask the consultants if needed. Quick‑change insert SE 14 mm × 11 mm, size 2 — TECWERK (for DIN 374/376 M18) The Quick‑change insert SE 14 mm × 11 mm, size 2 is a precision adapter designed to hold thread taps in quick‑clamping systems for efficient tapping operations in workshop and industrial settings Compact size for tight tool setups Secure torque transfer via 11 mm square shank Compatible with DIN 374/376 M18 taps Straightforward changeover for higher uptime Reliable tap retention and consistent torque transmission Engineered to hold thread taps securely in a quick‑clamping device, this insert delivers direct torque transfer through the 11 mm square on the shank, reducing the risk of slippage under load. The absence of a safety coupling (listed as no safety coupling) means torque is transmitted without an intermediate release mechanism, which supports repeatable torque behaviour in controlled production environments. For workshops that prioritise predictability during tapping, the robust mechanical connection between tap and drive reduces variability and supports consistent thread quality across batches. Space‑saving design that improves process stability The size 2 format and 14 mm seat diameter make the adapter suitable where compact tool arrangements are necessary. A precise fit minimises radial runout and helps maintain concentricity between the toolholder and the tap, which directly benefits thread accuracy and surface finish. Key dimensional references such as L1: 32 mm, L4: 35 mm and D: 48 mm reflect a design intended for tight integration into common quick‑change systems while retaining sufficient engagement length to ensure secure seating during machining. Easy integration into existing quick‑clamping workflows The insert is intended for use with taps specified to DIN 374/376 M18 and relies on the quick‑clamping mechanism to retain the tap body. Different shank measures require corresponding inserts, so workshop planners can assemble a matched set for varied tap sizes without modifying the primary quick‑clamp tooling. This compatibility simplifies inventory of adapters and reduces setup time during tool changes, supporting higher machine availability and faster throughput in serial or batch production. Contact Metav Werkzeuge for application advice or to request this TECWERK quick‑change insert for immediate dispatch; Metav’s specialists can confirm fitment and recommend compatible inserts for other shank sizes Technical data Article number: 4000832647NW Product: Quick‑change insert SE 14 mm × 11 mm, size 2 Manufacturer: TECWERK Product type: Quick‑change insert SE SKU / UID: 4000832647NW Facts Seat diameter: 14 mm Shank square: 11 mm Suitable for: DIN 374/376 M18 Size: 2 L1: 32 mm L3: 5 mm L4: 35 mm L5: 11 mm D: 48 mm D1: 31 mm Packaging unit: 1 Special features No safety coupling Thread taps held by quick‑clamping device Torque transmission via shank square Different inserts required for different shank sizes FAQ How does the insert secure the thread tap during tapping? The insert secures the tap in the quick‑clamping device and transfers torque via the 11 mm square shank, ensuring a positive mechanical drive for stable tapping with the TECWERK quick‑change insert (SKU 4000832647NW). Is this insert compatible with other tap standards? This adapter is specified for taps to DIN 374/376 M18; adapters for other standards or shank sizes should be selected to match the clamp and tap dimensions. What does "no safety coupling" mean for everyday use? A designation of no safety coupling indicates that the insert does not include a torque‑release mechanism; torque is transmitted directly, which suits controlled production where predictable torque behaviour is required. Will the insert reduce setup times in a production cell? Yes, the quick‑change format and compact size 2 geometry facilitate faster tool exchanges and reduce machine downtime when matched with a compatible quick‑clamping system. Which dimensions are most relevant when checking fitment? Primary dimensions to verify are the 14 mm seat diameter, the 11 mm square shank and the overall engagement lengths such as L1 and L4 to ensure correct seating and clamp compatibility. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
14mm Quick-Change Insert SES 11mm Square For DIN 374/376 M18, Adjustable Safety Clutch - TECWERK
Take advantage of the combination of secure torque control, compact size and straightforward interchangeability to reduce tap breakage and downtime in production. Benefit from a quick-change solution that transmits torque via a robust 11 mm shaft square and is designed for taps to DIN 374/376 M18 — order through Metav Werkzeuge or request guidance from our consultants. Quick-change insert SES 14mm x 11mm, Size 2 – with adjustable safety coupling (TECWERK) The Quick-change insert SES 14mm x 11mm, Size 2 is a replaceable insert for tap holders and hand taps made to fit DIN 374/376 M18, featuring an adjustable safety coupling that limits torque to avoid tap breakage. Adjustable safety coupling for torque limitation Minimises tap breakage during threading Torque transmission via 11 mm shaft square Compatible with DIN 374/376 M18 taps Safe threading through controlled torque The insert is centred on an adjustable safety coupling that performs torque limitation to protect taps during interrupted cuts or misalignment. By limiting peak torque, the device prevents sudden overloading and therefore significantly reduces the risk of tap breakage, which in turn lowers scrap rates and maintenance interventions. This engineered protection is particularly valuable in repetitive production environments where tool failure causes costly stoppages. Reliable fit and efficient torque transfer Designed for precision engagement, the unit transmits drive forces over an 11 mm shaft square, ensuring direct and wear-resistant torque transfer to the tap. Compatibility with DIN 374/376 M18 means straightforward integration into existing tap holders and hand-tapping fixtures. The compact footprint and carefully specified interface dimensions contribute to consistent centring and repeatable thread quality across runs, improving process stability and reducing rework. Fast changeover and application flexibility The quick-change concept allows fast replacement of worn or differently sized inserts so that different shank measurements can be accommodated by swapping the unit. The insert’s construction supports efficient workshop workflows and lowers setup time for maintenance or batch changes. For specialised applications where shank variants are in use, matching the correct SES insert size maintains torque control and protects high-value taps — assistance for selection is available from Metav Werkzeuge’s specialist team. Contact Metav Werkzeuge for expert advice on selecting the right TECWERK quick-change SES insert; call +49 2822 7131930 or email info@metav-werkzeuge.com for tailored assistance Technical data Article number: 4000832681NW Product: Quick-change insert SES Type: Size 2 Suitable for: DIN 374/376 M18 Packaging unit: 1 Manufacturer: TECWERK Numbers / Core technical data Diameter: 14 mm Square drive: 11 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D: 50 mm L1: 32 mm D1: 31 mm Special features Adjustable safety coupling for torque limitation Prevents tap breakage during threading Torque transmission via shaft square Requires matching inserts for different shank sizes SES quick-change system FAQ What is the main purpose of the adjustable safety coupling? The adjustable safety coupling in the Quick-change insert SES 14mm x 11mm, Size 2 limits peak torque to protect taps and reduce the likelihood of tap breakage during threading operations. Which tap standards does this insert support? The insert is designed for use with taps conforming to DIN 374/376 M18 and mates with compatible tap holders and hand-tapping fixtures. How is torque transferred from the driver to the tap? Torque is transmitted via the 11 mm shaft square, providing a direct and robust drive interface that minimises slippage and wear. Are different shank sizes supported by the SES system? Yes, the SES quick-change concept requires different inserts for varying shank measurements; swapping the insert adapts the system to the required shank size while maintaining torque control. What dimensions should be checked for compatibility with existing holders? Check the core dimensions such as diameter 14 mm, square drive 11 mm and the overall interface lengths (L1, L3, L4, L5) to ensure correct seating and centring in the tap holder. TECWERK: Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Quick-Change Insert SE 16mmx12mm Gr.2 for DIN 374/376 M20, 12mm Square Shaft - TECWERK
Benefit from reliable torque transfer via a 12 mm square shank and the time-saving quick-change clamping design; order the Quick-change insert directly via Metav Werkzeuge or ask our specialists for application advice. Quick-change insert SE 16 mm × 12 mm (Size 2) — for DIN 374/376 M20 tapping, 12 mm square shank (TECWERK) A Quick-change insert SE 16 mm × 12 mm (Size 2) designed to secure taps in quick-clamping holders for standard DIN 374/376 M20 threading operations, offering a compact and robust connection between tap and toolholder Quick-change design for fast tool swaps Torque transmission via 12 mm square shank Compatible with DIN 374/376 M20 tapping Reduce setup times with a true quick-change system The insert's quick-change configuration is engineered to shorten tool changeover times in series production and maintenance tasks. By holding taps in a dedicated quick-clamping device, the design eliminates repeated manual tightening and adjustment, resulting in consistent positioning and rapid exchange. This saves machine downtime and boosts throughput without compromising thread quality — a pragmatic solution for workshops and toolrooms where cycle time and repeatability matter. Secure torque transfer through a square shank interface Torque transmission is handled via the 12 mm square shank, which provides a positive mechanical drive between holder and tap. This form-fit connection reduces the risk of slippage under load and ensures reliable rotational force for cutting threads to DIN 374/376 M20 standards. For users unfamiliar with the standard: DIN 374/376 define dimensions and tolerances for taps and corresponding fittings, meaning the insert supports established industrial threading practices and consistent results across batches. Modular integration for diverse shank requirements The insert is part of a modular concept in which different shank sizes are accommodated by matching inserts, allowing existing quick-change holders to be adapted rather than replaced. The absence of a safety coupling in this variant simplifies the mechanical interface and keeps the arrangement compact; where a protective shear feature is required, a different insert version should be selected. This modularity makes the solution suitable for production lines that require flexible tooling options while keeping inventory manageable. Practical suitability for workshop and industrial use Designed as a Size 2 insert, the component combines compact external dimensions with sturdy internal geometry, making it appropriate for confined setups and straightforward toolholder systems. The product supports efficient tapping workflows, particularly where rapid tool exchange and reliable torque transfer contribute directly to product quality and process economy. Where exact fit and minimal axial runout are essential for thread accuracy, the insert’s precise contact geometry helps maintain tolerances and reduce scrap rates. For secure, fast-change tapping in DIN-standard systems, choose the TECWERK Quick-change insert SE 16 mm × 12 mm (Size 2) — contact Metav Werkzeuge for tailored advice or to arrange supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number (SKU): 4000832648NW Product: Quick-change insert SE Size/Type: Size 2 Brand: TECWERK Suitable for: DIN 374/376 M20 Core data Diameter (D): 48 mm Face diameter (D1): 31 mm Insert diameter: 16 mm Square shank: 12 mm L1: 32 mm L3: 5 mm L4: 35 mm L5: 11 mm Special features No safety coupling Taps held by quick-clamping device Torque transmission via shaft square Different inserts required for different shank sizes FAQ What thread standard does this insert support? The quick-change insert is designed for use with taps conforming to DIN 374/376 M20 and provides the correct interface for standardised tapping operations. Which shank size transmits torque with this insert? Torque transmission is achieved via the 12 mm square shank; the insert ensures a positive drive between tap and holder. Is a safety coupling included with this variant? This Size 2 insert is supplied without a safety coupling; the configuration focuses on compactness and direct torque transfer. Can this insert be used in modular quick-change systems? Yes, the insert is intended for modular quick-change holders where matching inserts accommodate different shank dimensions. What are the key external dimensions to check for fitment? Relevant dimensions include the outer diameter of 48 mm, face diameter 31 mm and overall length values L1 32 mm, L4 35 mm for correct integration. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
16mm Quick-Change Insert SES 12mm Square for DIN 374/376 M20, Adjustable Torque-Limiting Safety Clutch - TECWERK
Take advantage of the combination of reliable torque control and a compact, service-friendly design to reduce tap breakage and maintain production flow. Order the SES quick-change insert directly via Metav Werkzeuge or consult the team for compatibility and sizing advice. TECWERK SES Quick-change Insert 16 mm x 12 mm, Size 3 — for DIN 374/376 M20 The SES Quick-change Insert 16 mm x 12 mm (Size 3) is a tap-holder insert with an adjustable safety coupling for torque limitation, engineered for use with DIN 374/376 M20 taps. Adjustable safety coupling for torque limitation Prevents tap breakage during threading Torque transmission via 12 mm square shank Compatible with DIN 374/376 M20 taps Reduce unplanned downtime with torque-limited tapping The insert’s core benefit is its adjustable safety coupling, which limits torque to protect taps from overload and breakage. By decoupling at a pre-set torque, the device prevents sudden tool failure that would otherwise halt production and require rework. This feature translates into measurable savings in machine uptime and reduces the need for frequent tap replacements, supporting a more predictable workflow in small-scale workshops and industrial departments alike. The design focuses on operational reliability rather than complex user adjustments, so the torque-limiting function is effective without adding setup overhead. Reliable torque transfer with a clear mechanical interface Torque is transmitted via the 12 mm square shank, providing a direct, positive drive path that minimises backlash and ensures consistent torque delivery to the tool. The insert is specified for a 16 mm diameter interface and configured for DIN 374/376 M20, making it suitable for standard metric tapping applications. The mechanical dimensions — L3: 41 mm, L4: 55.5 mm, L5: 45 mm, D: 72 mm, L1: 45.2 mm, D1: 48 mm — allow planners to assess axial and radial space requirements quickly. For users less familiar with these codes: the square shank is the connection that mates with the tapping machine or holder, and the clear dimensional data helps ensure a correct fit without trial-and-error. Straightforward integration and service-friendly swap-outs The insert is intended as part of a modular quick-change system: different inserts are used for differing shank sizes, enabling rapid changeovers between operations and minimising setup time. The unit’s construction allows simple replacement of the insert when a different shaft size is required, and the torque setting can be adjusted to match the hardness and thread depth of the workpiece material. This modular approach supports flexible shop-floor planning and reduces tool inventory complexity while maintaining consistent process safety across varied tapping tasks. Contact Metav Werkzeuge today to confirm the correct SES insert for the tapping application and benefit from personalised technical advice and reliable supply from Emmerich. Technical details Article number: 4000832687NW Product: SES Quick-change Insert Size: 3 Brand: TECWERK Facts Diameter: 16 mm Square shank: 12 mm L3: 41 mm L4: 55.5 mm L5: 45 mm D: 72 mm L1: 45.2 mm D1: 48 mm Compatible standard: DIN 374/376 M20 Packaging unit: 1 Special features Adjustable safety coupling for torque limitation Prevents tap breakage Torque transmission via shaft square Suitable for standard metric tapping (DIN 374/376 M20) Requires different inserts for different shank sizes FAQ What is the purpose of the adjustable safety coupling on the SES insert? The adjustable safety coupling in the SES Quick-change Insert provides torque limitation to avoid tap breakage by slipping or decoupling when a preset torque is exceeded. Is the insert compatible with standard M20 taps? Yes, the TECWERK SES Quick-change Insert 16 mm x 12 mm (Size 3) is specified for use with DIN 374/376 M20 taps. Which shank size does this insert accept and how is torque transmitted? Torque is transmitted via a 12 mm square shank; the insert is designed for a 12 mm square connection to deliver positive drive to the tap. Can the SES insert be adjusted for different materials or thread depths? The torque setting on the SES insert can be adjusted to match different material hardnesses and thread depths, helping to protect taps during varying machining conditions. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
16mm Quick-Change Insert SES 12mm Square Shank for DIN 374/376 M20, Adjustable Safety Clutch - TECWERK
Take advantage of the adjustable safety coupling and the robust 12 mm square torque transmission to reduce tap breakage and maintain uninterrupted production. Order directly via Metav Werkzeuge or consult our specialists for application advice and fitting options. Quick-change insert SES 16 mm x 12 mm, Size 2 – for DIN 374/376 M20 (TECWERK) A quick-change insert SES designed for M20 thread tapping that reduces tool breakage with an adjustable safety coupling and simple square-shank torque transfer Adjustable safety coupling for torque limit Prevents tap breakage during operation Torque transmitted via 12 mm square shank Compatible with DIN 374/376 M20 taps Reduce tap breakage and keep production running The adjustable safety coupling built into this quick-change insert acts as a mechanical torque limiter, allowing a controlled slip before a tap is overloaded. This feature significantly reduces the risk of tap breakage, which otherwise causes unplanned downtime and difficult rework. The torque is transferred directly through the 12 mm square shank, ensuring a positive connection between holder and tap and reliable power transmission under intermittent loads. For machining operations that require consistent thread quality, the combination of torque control and firm drive engagement supports predictable cycle times and fewer tool-change interruptions. Speed up changeovers and simplify tool handling The SES design supports rapid interchange of the tapping adapter, accelerating set-up and reducing non-productive time in small-batch and mixed-production environments. The insert’s geometry is prepared for use with standard M20 taps specified by DIN 374/376, making selection straightforward for maintenance and operations teams. Clear overall dimensions such as L3: 30.5 mm, L4: 35 mm, L5: 34 mm, D: 50 mm, L1: 32 mm and D1: 31 mm help to confirm fit in existing holders and machine spindles. Where different shank sizes are used, matching inserts are available to maintain correct alignment and secure clamping without compensating fixtures. A practical component for workshop reliability Designed for routine industrial use, the insert focuses on practical benefits: repeatable torque behaviour, simplified inventory through standard compatibility, and reduced scrap rates due to broken taps. The adapter’s specification supports workshops and production lines that prioritise uptime and repeatable thread integrity. For procurement, the part is supplied as a single unit and integrates with established tool control practices; documentation of the adapter’s mechanical limit behaviour aids risk assessments and process planning in quality-conscious operations. For reliable torque protection and faster changeovers, choose the TECWERK quick-change insert and contact Metav Werkzeuge for application-specific advice and supply options Technical data Article number / SKU: 4000832682NW Product: Quick-change insert SES, Size 2 Compatible with: DIN 374/376 M20 Square drive: 12 mm Diameter: 16 mm Packaging unit: 1 Core data Diameter D: 16 mm Square drive: 12 mm L1: 32 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D1: 31 mm Special features Adjustable safety coupling for torque limitation Prevents tap breakage Torque transmission via the shaft square Requires matching insert for differing shank sizes FAQ What is the primary function of this quick-change insert? The quick-change insert SES 16 mm x 12 mm (TECWERK, SKU 4000832682NW) provides controlled torque limitation via an adjustable safety coupling to prevent tap breakage during M20 tapping operations. Which taps is the insert compatible with? Compatibility is with taps conforming to DIN 374/376 for M20; the insert is designed to work directly with those standard thread taps when used with the correct holder. How does the torque limitation work in practice? The insert’s adjustable safety coupling slips at a preset torque, protecting the tap from overload while the 12 mm square drive maintains reliable torque transmission until the limit is reached. Are there dimensional details to check before ordering? Yes; relevant dimensions include L1: 32 mm, L3: 30.5 mm, L4: 35 mm, L5: 34 mm, D: 50 mm and D1: 31 mm — these determine fit with existing holders and spindles. Is the insert supplied individually or in sets? The product is supplied as a single unit (packaging unit 1), allowing tailored stocking and replacement practices. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
18mm Quick-Change Insert SES 14.5mm Square Drive, Adjustable Safety Clutch, For DIN 374/376 M22 - TECWERK
Take advantage of the combination of an adjustable torque-limiting safety clutch, robust square-shaft torque transmission and compact dimensions to protect taps and reduce production interruptions. Order the insert directly via Metav Werkzeuge or contact our advisers for application guidance. Quick-change insert SES 18 mm x 14.5 mm Size 2 for DIN 374/376 M22 (TECWERK) The Quick-change insert SES 18 mm x 14.5 mm Size 2 is a compact adaptor designed to protect thread taps during manual or machine tapping, offering torque limitation and secure torque transfer for consistent threading in workshop and industrial environments Adjustable torque-limiting safety clutch Reduces risk of tap breakage Torque transmitted via 14.5 mm square shank Compatible with DIN 374/376 M22 taps Protects taps and reduces downtime The Quick-change insert SES 18 mm x 14.5 mm Size 2 features an adjustable safety clutch that limits torque to a preset value, significantly reducing the risk of tap breakage when a sudden load occurs. By preventing tool failure at the point of threading, the unit contributes directly to fewer stoppages and lower repair or replacement costs. For production environments where consistent thread quality and uptime matter, this torque-control function delivers a clear operational advantage. Reliable torque transfer for accurate threading Torque is transferred via the 14.5 mm square shank, which ensures a direct and backlash-minimised connection between spindle and tap. The result is repeatable torque transmission and improved thread quality, especially important when working with tougher materials or long engagement depths. Explaining the mechanism: the square shaft engages positively with the tool holder so that torque is passed mechanically rather than relying on friction, reducing slippage and the need for corrective rework. Compact design for flexible integration With compact external dimensions, the insert is easy to integrate into existing tap holders and hand tools. Key dimensions such as D: 50 mm, L1: 32 mm and L3: 30.5 mm keep the overall profile small while preserving functional length for secure engagement. This compactness allows installation in confined fixtures and reduces leverage that can stress the tap, supporting steadier tapping cycles in constrained assemblies. Compatibility and practical application Designed for tapping to DIN 374/376 M22, the insert suits common metric tap sizes used across maintenance, repair and production shops. The unit’s construction permits use with different shaft sizes when matched with the corresponding inserts, offering modularity for multi-shank toolrooms. Supplied as a single unit per packaging, the insert provides a straightforward retrofit for operations seeking improved tap protection without extensive changes to tooling setups. Contact Metav Werkzeuge for tailored advice and secure the TECWERK quick-change insert with adjustable safety clutch from our Emmerich service team at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832683NW Designation: Quick-change insert SES 18 mm x 14.5 mm Size 2 for DIN 374/376 M22 Product type: Quick-change insert SES Manufacturer: TECWERK Packaging unit: 1 Core dimensions Diameter D: 18 mm Square shank: 14.5 mm L1: 32 mm L3: 30.5 mm L4: 35 mm L5: 34 mm D1: 31 mm Overall diameter: 50 mm Special features Adjustable safety clutch for torque limiting Prevents thread tap breakage Torque transmitted via shaft square For different shank sizes, various inserts required Suitable for DIN 374/376 M22 taps FAQ What is the primary function of this quick-change insert? The quick-change insert SES 18 mm x 14.5 mm Size 2 protects taps by limiting torque via an adjustable safety clutch, reducing the likelihood of breakage during threading. Which tap standards are supported by this insert? This insert is suitable for taps to DIN 374/376 M22 and is intended for use where that metric standard is required. How is torque transmitted through the unit? Torque is transmitted mechanically via the 14.5 mm square shank, ensuring positive engagement and minimised slippage during tapping. Can the torque limit be adjusted for different materials? Yes. The adjustable safety clutch allows the torque threshold to be set to match the demands of different materials and tap sizes, providing flexibility in application. Is this insert supplied individually or in sets? The item is supplied as a single unit per packaging (packaging unit 1) and can be ordered individually. Manufacturer/Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
18mm Quick-Change Insert SES 14.5mm Square Shank for DIN 374/376 M22, Adjustable Torque-Limiter - TECWERK
Combining an adjustable safety clutch with direct shaft-square torque transmission in a compact Size 3 design, this quick-change insert reduces tap breakage and maintains consistent threading performance. Order the SES insert via Metav Werkzeuge or consult our specialists for matching the adapter to your production setup. Quick-change insert SES 18 mm x 14.5 mm – Size 3, adjustable safety clutch (TECWERK) The Quick-change insert SES 18 mm x 14.5 mm Size 3 is a tap adapter with an adjustable safety clutch for torque limitation, designed for use with DIN 374/376 M22 threading applications. Adjustable safety clutch for torque limiting Prevents tap breakage during interrupted cuts Shaft-square drive for reliable torque transmission Compatible with DIN 374/376 M22 tap sizes Faster, safer threading through adjustable torque control The integrated adjustable safety clutch enables precise limitation of applied torque, which reduces the risk of tool failure during threading. By disengaging at a preset torque level, the clutch protects the tap from snap-off in interrupted or snagging threads, improving uptime and reducing consumable costs. This mechanical protection is particularly valuable in repetitive production environments where unexpected torque spikes otherwise require frequent tap replacement and interrupt workflow. Compact Size 3 form factor that fits standard tap holders Designed as a Size 3 quick-change insert, the component fits into common tap-change systems and mates with holders prepared for DIN 374/376 M22. The compact geometry preserves bench space and simplifies tool inventory: different shank sizes can be accommodated by swapping appropriate inserts, maintaining a small stock of adapters while covering multiple tap shank dimensions. The adapter’s construction focuses on a secure interface and repeatable positioning to ensure consistent thread quality across batches. Direct torque transfer via shaft square for dependable performance Torque is transmitted through the shaft square, ensuring a positive mechanical drive between machine and tap. This avoids slippage under load and enables efficient power transfer even in high-demand machining cycles. The device’s dimensions (including L3, L4 and D values) have been optimised to balance rigidity and accessibility, allowing the tap to reach into confined thread depths without compromising control or safety. The result is reliable, repeatable threading that supports process stability. Practical benefits for workshop and industrial users By preventing tap breakage and simplifying insert changes, this adapter contributes to measurable efficiency gains on the production floor. Reduced downtime from fewer tool failures and faster insert swaps improves throughput while lowering tool consumption. Backed by established industrial standards compatibility, the insert offers a pragmatic solution for workshops and maintenance departments that require robust tap protection and straightforward integration into existing quick-change systems. For tailored selection advice and prompt supply from Metav Werkzeuge, contact our specialists who will ensure the SES insert suits the intended tap shank and application. Technical data Article number: 4000832688NW Type: Size 3 Designation: Quick-change insert SES 18 mm x 14.5 mm for DIN 374/376 M22 Packaging unit: 1 Facts Diameter: 18 mm Square drive: 14.5 mm L3: 41 mm L4: 55.5 mm L5: 45 mm D: 72 mm L1: 45.2 mm D1: 48 mm Special features Adjustable safety clutch for torque limitation Prevents tap breakage in interrupted cuts Torque transmission via shaft square For different shank sizes, different inserts required Suitable for DIN 374/376 M22 tapping applications FAQ Is this insert compatible with standard M22 taps to DIN 374/376? Yes. The SES quick-change insert is specified for DIN 374/376 M22 and is designed to accept taps made to that standard. How does the adjustable clutch protect taps during threading? The adjustable safety clutch in the SES insert disengages at a preset torque, limiting peak loads and thereby reducing the likelihood of tap breakage during sudden jams or interrupted cuts. Which shank sizes are supported by this Size 3 insert? The insert transmits torque via a 14.5 mm shaft square; for other shank dimensions, alternative inserts are required to match the specific holder and tap shank. Can the insert be used in automated tapping stations? Yes. With its direct shaft-square torque transmission and compact dimensions, the insert is suitable for integration into automated and manual tapping stations that accept Size 3 quick-change adapters. What are the key dimensions to check for fitment? Refer to the SES insert dimensions: diameter 18 mm, square 14.5 mm, and the listed L1, L3, L4, L5 and D measurements to verify compatibility with the tool holder and required thread depth. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
18mm Quick-Change Insert SES 14.5mm Square Shank for DIN 374/376 M24, Adjustable Torque-Limiting Clutch - TECWERK
Take advantage of the combination of adjustable torque protection, fast tool changes and standard compliance to reduce tap breakage and downtime; order the insert directly via Metav Werkzeuge or consult our specialists for selection and shank compatibility. TECWERK SES Quick-change insert, size 3 — adjustable safety clutch, 18 mm diameter The TECWERK SES quick-change insert is a size 3 tool-holder insert designed for tapping to DIN 374/376 M24, offering torque-limiting protection and rapid exchange for production environments. Adjustable safety clutch for torque limitation Prevents tap breakage during tapping Shaft square 14.5 mm for torque transfer Engineered protection that reduces tool failure and downtime The SES quick-change insert combines an adjustable safety clutch with a robust torque-transfer concept to protect cutting tools during tapping operations. By limiting peak torque, the device significantly reduces the risk of tap breakage, which in turn lowers rework and machine downtime. The clutch setting can be calibrated to the process requirements, enabling consistent production runs while preserving expensive tools and thread quality. Faster changeovers and clear torque transmission Quick-change capability shortens setup times and supports lean workflows by enabling rapid replacement of inserts without complex reconfiguration. Torque is transmitted through the shaft square (14.5 mm), ensuring direct mechanical drive and minimising play between spindle and tool. This design delivers dependable power transfer for reproducible thread forming and tapping cycles, improving overall process efficiency and cycle-time predictability. Designed for compatibility and straightforward workshop planning The insert is specified for compliance with DIN 374/376 M24 and identified as size 3, simplifying tool selection for standard tapping tasks. Key dimensions — including diameter 18 mm, L3 41 mm, L4 55.5 mm and L1 45.2 mm — are provided for fixture and machine-tool planning, so integration into existing setups is straightforward. Where different shank sizes are used, matching inserts are required, allowing tailored adaptation to varied tap shanks without compromising torque control. Operational reliability and maintenance benefits Built to support repetitive tapping operations, the unit promotes longer tool life and predictable maintenance cycles. The adjustable torque limiter not only prevents immediate failure but also reduces cumulative stress on machines and taps, resulting in fewer unexpected interruptions. Simple adjustment and clear mechanical design mean maintenance is quick and inspection intervals can be planned with confidence. For precise torque protection and reliable quick-change operation, contact Metav Werkzeuge for advice and ordering of the TECWERK SES quick-change insert (SKU 4000832689NW) to ensure the correct insert for the required shank size and tapping standard. Technical data Article number: 4000832689NW Manufacturer: TECWERK Product type: Quick-change insert SES Core data Diameter: 18 mm Shaft square: 14.5 mm Size: 3 Suitable for: DIN 374/376 M24 Packaging unit: 1 Special features Adjustable safety clutch for torque limitation Prevents tap breakage Torque transmission via shaft square L3: 41 mm L4: 55.5 mm L5: 45 mm D: 72 mm L1: 45.2 mm D1: 48 mm FAQ How does the adjustable safety clutch protect tapping tools? The adjustable safety clutch in the TECWERK SES quick-change insert limits peak torque by disengaging or slipping at the set threshold, preventing sudden overloads that cause tap fracture and extending tool life. Is this insert compatible with standard M24 taps? Yes, the insert is specified for use with taps conforming to DIN 374/376 M24 and is designed to provide secure torque transmission for that standard. Which shank sizes are supported by this system? Torque transmission is via the shaft square; this particular insert uses a 14.5 mm square. Different shank sizes require corresponding inserts to ensure proper fit and torque transfer. Can the clutch setting be adjusted on the shop floor? The safety clutch is designed for workshop adjustment so the torque threshold can be adapted to the material and tap geometry, enabling flexible process control. What dimensional data should be considered when planning integration? Key dimensions include diameter 18 mm, L3 41 mm, L4 55.5 mm, L5 45 mm, L1 45.2 mm and D1 48 mm; these values support fixture design and machine compatibility checks. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
2.8mm x 2.1mm Quick-Change Insert SE for DIN 371/374/376, L3 4mm L4 21.5mm - TECWERK
The combination of a compact 2.8 mm cutting interface, a robust 2.1 mm shaft square and direct torque transmission ensures fast tool changes and reliable tapping performance in small-thread applications; order the insert directly via Metav Werkzeuge or ask their consultants for compatibility advice. Quick-change insert SE 2.8 mm x 2.1 mm (Size 1) — TECWERK quick-clamp insert for DIN taps The Quick-change insert SE 2.8 mm x 2.1 mm is a size 1 insert designed to hold thread taps in quick-clamping adaptors, suitable for standard small-thread sizes specified in DIN 371 and DIN 374/376. Quick-change design for fast tool swaps Torque transmitted via shaft square 2.1 mm Compatible with DIN 371 M2–2.5 and DIN 374/376 M4 Compact size 2.8 mm diameter, L4 21.5 mm Precision and compatibility for small-thread tapping This quick-clamping insert delivers a compact solution for precise tapping tasks in restricted spaces. Built for compatibility with common small-thread standards, the insert matches taps to the DIN 371 M2–2.5 and DIN 374/376 M4 families, which makes it suitable for detailed assembly and repair work. The compact 2.8 mm diameter and the defined dimensions (notably L4 21.5 mm) ensure consistent axial positioning in the clamping adaptor, reducing misalignment and minimising the risk of tap breakage. The result is measurable time savings in changeovers and fewer rejects in repetitive production sequences. Engineered for direct torque transmission and reliable holding Constructed for direct power transfer, the insert transfers torque through the 2.1 mm shaft square, avoiding intermediate coupling losses. The design intentionally excludes a safety clutch (without safety clutch), which maintains a rigid connection between tool and holder for applications where slip would negatively affect thread quality. The taps themselves are secured in the insert by the quick‑clamping mechanism, so the operational principle is simple: secure the tap, engage the quick clamp and transmit torque through the square shank. This clear mechanical chain supports repeatable torque delivery and predictable performance in precision tapping operations. Workshop workflow advantages and supply reassurance Using standardised quick-change inserts simplifies inventory and tool management: different shank sizes simply require the corresponding insert type, allowing workshops to cover a range of tap shank formats without bespoke adaptors. The compact geometry of the unit reduces handling time during threading operations and lends itself to automated sequences where rapid exchange is essential. Metav’s role as a precision partner strengthens this workflow: central supply from Emmerich and a broad product range minimise procurement complexity while offering access to technical guidance when integrating the insert into existing quick-clamp systems. Discuss technical fitment and secure supply through Metav Werkzeuge for TECWERK quick-change inserts dispatched directly from Emmerich. Technical data Article number: 4000832633NW Product type: Quick-change insert SE Brand: TECWERK Type: Size 1 Suitable for: DIN 371 M2–2.5; DIN 374/376 M4 Packaging unit: 1 Core dimensions Diameter: 2.8 mm Shaft square: 2.1 mm L1: 18.5 mm L3: 4 mm L4: 21.5 mm L5: 7 mm D: 30 mm D1: 19 mm Special features Without safety clutch Inserts hold taps via quick-clamping device Torque transmission via shaft square Different shank sizes require corresponding inserts FAQ How does this insert secure thread taps in the quick-clamping system? The Quick-change insert SE 2.8 mm x 2.1 mm secures taps by the quick-clamping device; the tap shank is clamped inside the insert and torque is transmitted via the 2.1 mm shaft square. Which tap sizes are compatible with this insert? Compatibility is specified for DIN 371 M2–2.5 and DIN 374/376 M4, meaning the insert is intended for the small-thread tap sizes covered by those DIN designations. Is there a safety clutch included with the insert? The design is specified without safety clutch, providing a rigid connection for applications where consistent torque transfer and minimal slip are required. What are the key dimensions to check when selecting a matching insert? Important dimensions include the 2.8 mm diameter, the 2.1 mm shaft square and the axial measures such as L4 21.5 mm; refer to SKU 4000832633NW for exact sizing. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm Quick-Change Insert SES 16mm Square for DIN 374/376 M27, Adjustable Safety Clutch - TECWERK
Benefit from a combination of adjustable safety clutch and secure four-square shank torque transmission that reduces tap breakage and keeps production running. Order the quick-change insert directly from Metav Werkzeuge or consult the advisers for specification support. Quick-change insert SES 20 mm x 16 mm, Size 3 — adjustable safety clutch, for DIN 374/376 M27 (TECWERK) The Quick-change insert SES 20 mm x 16 mm (Size 3) is a tapping accessory engineered to limit torque and protect taps during manual and machine tapping applications compliant with DIN 374/376 M27. Adjustable safety clutch for torque limitation Prevents tap breakage during tapping operations Torque transmission via 16 mm four-square shank Compatible with DIN 374/376 M27 taps Controlled torque to prevent tool failure The core advantage is the adjustable safety clutch which limits the torque applied to the tap, preventing sudden overloads and the consequent tap breakage. This function converts an unpredictable failure mode into a manageable operational parameter, lowering scrap rates and downtime. The torque is transferred via a four-square shank, ensuring direct, backlash-free transmission to the tap shank for consistent thread quality. For technicians unfamiliar with torque-limiting systems: the clutch disengages when the preset torque threshold is reached, protecting both the tap and the workpiece while allowing rapid continuation of the process. Standardised fit for common tapping tasks Designed around industry standards, the insert suits taps manufactured to DIN 374/376 M27 and is prepared for workshop environments where repeatable fits are essential. The 20 mm diameter working face and the 16 mm square shank provide a compact interface that matches common drive systems. Because torque is taken through the square shank, different drive sizes require the corresponding insert variants; this modular approach maintains secure engagement and simplifies stock management when multiple shank standards are in use. Compact dimensions that integrate easily into tool setups The component’s geometry is optimised for insertion and removal in quick-change systems without compromising strength. Key dimensions (detailed below) show a compact profile suitable for tight assemblies while offering sufficient mass to stabilise the tap during engagement. The design keeps the centre of mass close to the drive axis, which reduces eccentric loads and supports consistent thread formation. Workshop operators benefit from reduced setup complexity and straightforward replacement when different shank sizes are required. Operational reliability and workflow benefits Integrating an insert with a torque-limiting mechanism translates directly into operational gains: fewer broken taps, fewer interrupted cycles and a safer working environment. The straightforward mechanical concept requires no electrical supply and is low-maintenance, making it a pragmatic choice for busy production floors. When paired with Metav’s distribution and advisory services, the solution supports predictable supply, technical guidance and a single-source procurement model that simplifies tooling logistics. For specification advice or to secure supply of the TECWERK SES quick-change insert with its adjustable safety clutch, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for prompt technical assistance and reliable delivery. Technical data Article number: 4000832690NW Label: Quick-change insert SES 20 mm x 16 mm Size 3 for DIN 374/376 M27 Product type: Quick-change insert SES Manufacturer: TECWERK Packaging unit: 1 Facts Diameter: 20 mm Square shank: 16 mm L1: 45.2 mm L3: 41 mm L4: 55.5 mm L5: 45 mm D: 72 mm D1: 48 mm Special features Adjustable safety clutch for torque limitation Prevents tap breakage during tapping Torque transmission via four-square shank Suitable for DIN 374/376 M27 taps Different inserts required for other shank sizes FAQ What safety function does this insert provide? The insert incorporates an adjustable safety clutch which limits torque to protect taps from overload and to reduce the risk of tap breakage during tapping operations. Is the insert compatible with standard M27 taps? Yes, the insert is intended for use with taps to DIN 374/376 M27 and is designed to interface via a 16 mm square shank. How is the torque transmitted to the tap? Torque is transmitted directly through the four-square shank, providing a positive drive with minimal play for reliable thread cutting. Are different shank sizes available? Different shank sizes require matching inserts; the current item uses a 16 mm square drive and other sizes must be ordered as separate insert variants. Where can the exact dimensions and specification be found? Exact dimensions, including L1, L3, L4, L5, D and D1, are provided above in the technical data and support accurate integration into existing tooling setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
22mm Quick-Change Insert SES Size 3 for DIN 374/376 M30, 18mm Square, Adjustable Torque Safety Clutch - TECWERK
Take advantage of the combination of an adjustable safety coupling, robust torque transmission via an 18 mm shaft square, and a compact design that reduces tap breakage and downtime; order the insert directly via Metav Werkzeuge or consult our specialists for matching inserts and shank sizes. Quick-change insert SES 22 mm × 18 mm, Size 3 — TECWERK for DIN 374/376 M30 with adjustable safety coupling The Quick-change insert SES 22 mm × 18 mm, Size 3 is a compact adapter designed for safe torque-limited threading operations with taps conforming to DIN 374/376 M30. Adjustable safety coupling for torque limitation Prevents thread tap breakage during operation Torque transmitted via 18 mm shaft square Consistent torque control to protect tooling and processes The adjustable safety coupling provides a precise torque limit mechanism so that the tap slips before catastrophic failure occurs. This torque-limiting function reduces tool replacement frequency and minimises unscheduled machine downtime, which translates into measurable savings in cycle time and maintenance. In practice, a correctly set coupling prevents sudden overloads on the tap, preserving thread quality and extending component service life while maintaining production rhythm. Reliable transmission via the square shank for clean torque transfer Torque is transmitted through the shaft square, ensuring a positive drive and minimising torsional play during threading. The combination of a 22 mm body diameter with an 18 mm square provides a stable connection suitable for standard tapping fixtures. This means consistent cutting conditions and reproducible results in both single-station and multi-spindle setups. The secure mechanical interface supports higher process reliability and reduces the risk of misalignment-related tool wear. Designed for compatibility with DIN 374/376 M30 and modular workflows Compatibility with DIN 374/376 M30 makes the unit suitable for many industrial tapping applications. Different shank sizes require corresponding inserts, allowing workshops to assemble a modular set tailored to the machine and tap shank used. The modular approach streamlines tool change routines and reduces inventory complexity: one coupling type serves several tap families when paired with the appropriate insert, improving operational flexibility. Compact dimensions for straightforward integration into existing tool chains The compact overall dimensions and clear specification of critical lengths facilitate installation and space planning in toolholders and tapping heads. Key dimensions such as L3: 41 mm, L4: 55.5 mm and D: 72 mm define the envelope required for mounting and ensure compatibility with common tapping units. Clear dimensional data aids engineers when designing fixtures or selecting spindles, reducing trial fits and accelerating setup times on the shop floor. Discuss the TECWERK Quick-change insert SES 22 mm × 18 mm Size 3 with Metav Werkzeuge for tailored advice and fast delivery from our Emmerich stock, ensuring the correct insert selection for each shank size and tapping requirement Technical data Article number: 4000832691NW Product type: Quick-change insert SES Size: Size 3 Brand: TECWERK Suitable for: DIN 374/376 M30 Packaging unit: 1 SKU/UID: 4000832691NW Core measurements Diameter (D): 72 mm Diameter (D1): 48 mm L1: 45.2 mm L3: 41 mm L4: 55.5 mm L5: 45 mm Shank square: 18 mm Body diameter: 22 mm Special features Adjustable safety coupling for torque limitation Prevents thread tap breakage Torque transmission via shaft square Requires specific inserts for different shank sizes Compact, workshop-friendly geometry FAQ What is the primary purpose of this quick-change insert? The TECWERK quick-change insert is designed to limit torque during tapping operations and thereby protect taps from breakage while ensuring consistent thread quality. Which tap standards is the insert compatible with? The insert is suitable for taps conforming to DIN 374/376 M30 and is intended for use where that thread interface is specified. How does the adjustable safety coupling improve production reliability? By setting a defined torque threshold, the coupling slips before the tap is overloaded, reducing unexpected tool failure and improving overall machine uptime. Are different shank sizes supported with the same coupling? Yes, the coupling transmits torque via the shaft square, and different inserts are required for different shank measurements to ensure a secure fit. What are the key dimensions to verify before installation? Refer to the core measurements such as D, D1, L1, L3, L4, L5 and the shank square (18 mm) to confirm compatibility with the intended toolholder and tapping head. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
25mm Quick-Change Insert SES 20mm Square Gr.3 for DIN 374/376 M33 with Adjustable Torque-Limiting Safety Coupling - TECWERK
Take advantage of the adjustable safety coupling and robust torque transfer to reduce tap breakage and unplanned downtime; the compact design and clear compatibility with DIN 374/376 M33 make this insert a practical choice for production and toolroom environments — order through Metav Werkzeuge or contact the Metav experts for application advice. Quick-change insert SES 25 mm x 20 mm Size 3 by TECWERK — adjustable safety coupling for torque limiting Quick-change insert SES 25 mm x 20 mm Size 3 is a compact tap-holding insert designed for use with taps to DIN 374/376 M33 in production and workshop settings, combining secure clamping with an integrated safety coupling. Adjustable safety coupling for torque limiting Prevents tap breakage in interrupted cuts Torque transmitted via 20 mm square shank Compact 25 mm diameter for tight tool setups Minimise tap failure and keep production moving The adjustable safety coupling built into this quick-change insert is engineered to protect taps from overload by limiting transmitted torque. When a predetermined torque is exceeded, the coupling disengages so that a forced fracture of the tap is avoided; this mechanism is particularly useful when machining interrupted threads or when chip‑control is unpredictable. The result is fewer tool replacements and more consistent cycle times. The insert’s torque-limiting function is easy to set and, because the torque is transferred through the 20 mm square shank, the drive path remains direct and reliable under normal operating conditions. Fast changeover and secure clamping for busy toolrooms Designed for quick tool changes, the insert fits into standard holders where a 20 mm square drive is specified and presents a 25 mm diameter body that is compact enough for confined setups. The mechanical interface transmits power via the shank square, ensuring minimal backlash and predictable stiffness; for different holder drives, matching inserts are required, which allows flexible integration into varied tool racks and spindle adaptors. Clear, standard dimensions (L3, L4, L5, D, L1, D1) support planning and reduce errors during tooling changes, contributing to faster set-ups and reduced idle time. Built for production use and straightforward servicing This insert was conceived for professional environments where reliability and maintainability are paramount. The mechanical safety function reduces the risk of costly thread‑tap failures and repeat machining, which improves overall process yield. Routine inspection is limited to visual checks of the coupling and shank engagement; replacement is straightforward when wear occurs, so maintenance intervals can be planned rather than urgent. The compact design also supports nested or multi‑axis fixtures where space is at a premium. Application suitability and practical benefits Compatibility with DIN 374/376 M33 means the insert is suitable for thread‑cutting operations specified to that standard, while the torque‑limiting feature makes it a sensible choice for mixed batches and varied material conditions. The combination of precise torque control and standardised shank interface helps stabilise production outputs and reduces scrap rates. For workshops seeking to rationalise tooling without sacrificing safety, the insert offers a pragmatic balance between performance and operational resilience. Contact Metav Werkzeuge for tailored application advice and to arrange supply of the TECWERK Quick-change insert SES 25 mm x 20 mm Size 3; Metav Werkzeuge provides expert guidance from Emmerich and reliable dispatch to the workbench — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832692NW Product: Quick-change insert SES Size: Size 3 Manufacturer: TECWERK Facts Diameter: 25 mm Square shank: 20 mm L3: 41 mm L4: 55.5 mm L5: 45 mm D: 72 mm L1: 45.2 mm D1: 48 mm Packaging unit: 1 Special features Adjustable safety coupling for torque limiting Prevents tap breakage Torque transmission via shaft square Compatible with DIN 374/376 M33 Different shank sizes require specific inserts FAQ What types of taps are compatible with this insert? The Quick-change insert SES 25 mm x 20 mm Size 3 from TECWERK is compatible with taps made to DIN 374/376 M33; the torque is transmitted via the 20 mm square shank and the insert is intended for that thread specification. How does the adjustable safety coupling work? The adjustable safety coupling in the insert disengages when a preset torque threshold is exceeded, limiting transmitted torque to protect the tap from breaking and reducing the need for unplanned tool changes. Can the torque setting be changed on the shop floor? Yes, the torque limit is adjustable; the setting procedure for the TECWERK SES insert is mechanical and designed to be performed during routine set-up by trained personnel. Is the insert suitable for interrupted threading operations? Yes, the torque-limiting feature is specifically beneficial in interrupted threading or when cutting conditions are variable, as it helps to avoid sudden overloads that can cause tap fracture. Are matching inserts needed for different holders? Different drive or shank dimensions require corresponding inserts; the SES series uses the square shank for torque transmission, so inserts must match the holder’s shank size. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3.5mm Quick-Change Insert SES 2.7mm Square Shank for DIN 371 M3, Adjustable Torque Safety Coupling - TECWERK
Take advantage of the adjustable safety coupling and the shank-square torque transfer to reduce tap breakage and unplanned downtime, while keeping tapping reliable for DIN 371 M3 threads. Order the SES quick-change insert directly via Metav Werkzeuge or consult our specialists for compatibility and workshop optimisation. SES Quick-change Insert 3.5 mm × 2.7 mm, Size 1 – for DIN 371 M3 (TECWERK) SES Quick-change Insert 3.5 mm × 2.7 mm, Size 1 is a compact tap holder designed for safe, efficient thread tapping in line with DIN 371 M3 specifications Adjustable safety coupling for torque limiting Minimises tap breakage during tapping Torque transmitted via shank square drive Compatible with DIN 371 M3 taps Prevent broken taps and reduce machine downtime The integrated adjustable safety coupling limits torque to prevent sudden overloads that cause tap fracture. By decoupling torque peaks, the insert protects both the tool and the workpiece, leading to fewer interruptions and lower rework rates. This mechanical safeguard is particularly valuable for delicate or small-diameter threads where a single broken tap can halt production and inflate costs; the result is a more predictable tapping process and improved throughput. Consistent torque transmission for accurate threads Torque is transmitted through a shank square drive, ensuring a positive, backlash-free connection between holder and tap. This construction maintains axial alignment during rotation and supports consistent thread geometry, which matters for repeatable assembly and quality control. For applications compliant with DIN 371 M3, the precise drive interface reduces the risk of misalignment and wear, helping to produce reliable, functional threads batch after batch. Simple workshop integration and operator confidence The compact design and quick-change concept allow rapid swapping of inserts when different shank sizes are required, supporting flexible production runs. The safety coupling is adjustable to match material and tap condition, offering both novice and experienced operators a tangible safeguard. Combined with Metav Werkzeuge’s emphasis on accessible precision and trusted supply, this insert contributes to a confidence-building workflow that keeps small and medium workshops productive. Contact Metav Werkzeuge today to confirm the SES Quick-change Insert’s suitability for existing tapping setups and to request specific compatibility advice from our specialists Technical data Article number: 4000832659NW SKU: 4000832659NW Product type: Schnellwechseleinsatz SES Size: Gr. 1 Suitable for: DIN 371 M3 Packaging unit: 1 Facts Diameter D: 32 mm D1: 19 mm L1: 18.5 mm L3: 24.5 mm L4: 21.5 mm L5: 25.5 mm Nominal diameter: 3.5 mm Shank square: 2.7 mm Special features with adjustable safety coupling for torque limitation to avoid tap breakage torque transmission via the shank square different inserts required for different shank sizes FAQ What is the main purpose of this quick-change insert? The SES Quick-change Insert is designed to protect taps from overload by limiting torque via an adjustable safety coupling while maintaining reliable torque transmission through a shank square drive. Which taps are compatible with this insert? The insert is specified for DIN 371 M3 taps and is built to interface with taps that match that standard using the 2.7 mm square drive and the listed dimensions. How does the safety coupling reduce tap breakage? The adjustable coupling disengages or slips at a preset torque threshold, preventing torque peaks from transferring directly to the tap and thereby reducing the likelihood of fracture during tapping. Is this insert suitable for high-volume workshop use? Yes. The quick-change concept and robust torque transmission make it suitable for repetitive tapping tasks where reduced tool failure and rapid insert changes improve productivity. Can the torque threshold be adjusted on-site? Yes. The torque-limiting setting is user-adjustable to align with material type and tap condition, allowing tailored protection for different applications. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3.5mm x 2.7mm Quick-Change Insert SE Size 1 for DIN 371 M3 / DIN 374/376 M5, 4mm L3 - TECWERK
Take advantage of the combination of rapid changeover, precise torque transmission and compact dimensions for reliable tapping operations; order through Metav Werkzeuge or consult our specialists for selection support. Quick-change insert SE 3.5 mm x 2.7 mm, Size 1 – for DIN 371 M3 / DIN 374/376 M5 (TECWERK) The Quick-change insert SE 3.5 mm x 2.7 mm, Size 1 is a compact insert for holding thread taps in quick-clamping tooling, designed for efficient workshop and production use. Quick-change design for rapid tool swaps Compatible with DIN 371 M3 and DIN 374/376 M5 Torque transfer via 2.7 mm square shank Compact size: Ø 3.5 mm, L4 21.5 mm Faster tapping cycles with secure quick-clamp integration The quick-change concept of this insert delivers measurable workflow advantages by shortening tool-change intervals in tapping operations. Held in the quick-clamping device, the insert keeps thread taps reliably seated for repeatable cycles, which leads to reduced downtime and steadier throughput on production lines. The short installation length and compact outline support close tool spacing in multi-station setups, while the absence of a safety coupling simplifies the mechanical connection and avoids added components that can complicate inventory management. Direct torque transmission and consistent tool engagement Torque is transmitted directly through the 2.7 mm square shank, ensuring a positive mechanical drive between holder and tap. This arrangement provides consistent engagement and minimises slippage under normal tapping loads; the insert is therefore suitable for use with taps conforming to DIN 371 (M3) and DIN 374/376 (M5) standards. The design note that different shank measures require corresponding inserts is important for mixed tooling fleets: select the matching insert size for reliable torque transfer. Key installation dimensions are compact, with L4: 21.5 mm and L1: 18.5 mm, which aids layout planning and tool reach calculations. Workshop compatibility and practical stocking As a compact, size 1 insert with an external diameter of Ø 3.5 mm, this component integrates neatly into existing tap-holding systems and is suitable for both trade and light industrial environments where frequent tool changes are common. The insert holds taps in the quick-clamping mechanism and transmits drive via the shaft square; it is supplied without safety coupling, so planning for torque-limiting measures elsewhere in the process may be appropriate for sensitive applications. Single units arrive in the standard packing configuration (packaging unit: 1), simplifying replenishment for consumable toolstores. For guidance on matching the insert to specific tap geometries or clamping systems, Metav Werkzeuge can advise on compatibility and inventory planning. For a tailored recommendation on integrating the TECWERK quick-change insert into existing tapping stations, contact Metav Werkzeuge for expert advice and procurement assistance at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 4000832634NW Product type: Schnellwechseleinsatz SE Size: Gr.1 Specifications Diameter Ø: 3.5 mm Square shank: 2.7 mm L3: 4 mm L4: 21.5 mm L5: 7 mm D: 30 mm L1: 18.5 mm D1: 19 mm Packaging unit: 1 Features Suitable for DIN 371 M3 Suitable for DIN 374/376 M5 Without safety coupling Inserts hold taps in quick-clamping device Torque transmission via shaft square Different inserts required for different shank sizes FAQ Which taps are compatible with this insert? The quick-change insert SE 3.5 mm x 2.7 mm, Size 1 is compatible with taps to DIN 371 (M3) and DIN 374/376 (M5); the SKU is 4000832634NW and the item is supplied by TECWERK as a Schnellwechseleinsatz SE. Does the insert include a safety coupling? No, the insert is supplied without safety coupling; torque is transmitted directly via the square shank. How is drive torque transmitted to the tap? Drive is transferred over the 2.7 mm square shank, ensuring positive mechanical engagement between holder and tap for consistent torque transfer. Are different inserts required for other shank sizes? Yes, the system requires matching inserts for different square-shank dimensions; this specific insert uses a 2.7 mm square drive. What are the key dimensions to check before ordering? Important dimensions include Ø 3.5 mm, square shank 2.7 mm, L4: 21.5 mm, L1: 18.5 mm, D: 30 mm, and D1: 19 mm; verify these against the toolholder and tap specifications. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
3.5mm x 2.7mm Quick-Change Insert SES Size 1 for DIN 374/376 M5, Adjustable Torque Coupling - TECWERK
Take advantage of the combination of precise torque control, robust square-shank transmission and reduced tap breakage for safer, more efficient tapping operations; order the insert directly via Metav Werkzeuge or consult the team for application advice. Quick-change insert SES 3.5×2.7 mm, Size 1 – adjustable safety clutch, for DIN 374/376 M5 (TECWERK) A Quick-change insert SES 3.5×2.7 mm Size 1 designed to limit torque during tapping and to protect M5 taps in production and workshop environments. Adjustable safety clutch for torque limit Prevents tap breakage during tapping Torque transmitted via shaft square Compatible with DIN 374/376 M5 taps Increased process reliability through controlled torque The insert combines an adjustable safety clutch with a compact design to deliver predictable torque transfer when tapping. By limiting torque, the unit reduces the risk of tap breakage and unplanned downtime, which improves throughput in repetitive or automated operations. The clutch setting provides a measurable safeguard: when the preset torque is exceeded, slippage occurs instead of tool failure, making the component especially valuable for brittle materials or sensitive assemblies. This results in a more stable production flow and fewer interruptions. Straightforward integration and precise torque transfer Designed for direct torque transmission via the square shank, the insert fits standard quick-change holders and mates with conventional tap drives to ensure secure coupling and accurate power delivery. The square interface provides positive engagement and minimises backlash during rotation, which helps maintain thread quality. The compatibility with DIN 374/376 M5 taps means the insert is ready for common metric tapping tasks; different shank sizes require dedicated inserts, allowing flexible adaptation across tool sets without compromising safety functions. Practical advantages for workshops and production lines The compact geometry and clearly defined dimensions make the insert easy to select and replace in both manual and machine-assisted tapping setups. The unit supports efficient tooling logistics by reducing tap breakage and the associated replacement time, contributing to lower scrap rates and improved overall equipment effectiveness. As part of a precision tooling strategy, the insert supports consistent results, which helps to maintain quality standards across batches and operators. Contact Metav Werkzeuge for application guidance and to request a quotation for the TECWERK quick-change insert; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832660NW Label: Schnellwechseleinsatz SES 3,5mmx2,7mm Gr.1 f.DIN 374/376 M5 Manufacturer: TECWERK Product type: Quick-change insert SES Packaging unit: 1 Measurements Diameter (D): 32 mm Insert diameter: 3.5 mm Square shank: 2.7 mm L1: 18.5 mm L3: 24.5 mm L4: 21.5 mm L5: 25.5 mm D1: 19 mm Features Adjustable safety coupling for torque limitation Prevents tap breakage Torque transmission via shaft square For use with DIN 374/376 M5 taps Different inserts required for differing shank sizes FAQ What is the function of the adjustable safety clutch? The adjustable safety clutch in the SES quick-change insert limits transmitted torque so that slippage occurs before tap fracture, protecting tools and workpieces. Which taps are compatible with this insert? This insert is compatible with taps conforming to DIN 374/376 in size M5; the design ensures correct engagement and torque transfer for those tap types. How does the insert reduce the risk of tap breakage? By setting a torque limit on the clutch, the insert prevents overload of the tap; when torque exceeds the preset threshold the coupling slips instead of transferring damaging force. Are other shank sizes supported with the same insert? Different shank sizes require specific inserts; the SES range includes variants to match various shaft dimensions for secure fitting. What are the key dimensions to check before ordering? Confirm the main dimensions: insert diameter 3.5 mm, square shank 2.7 mm, overall D 32 mm and lengths L1 18.5 mm, L3 24.5 mm, L4 21.5 mm, L5 25.5 mm; refer to article number 4000832660NW for exact match. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com