10mm Clamping Screw M6 For 6mm Collet Chuck, Short Length - TECWERK
Take advantage of a compact M6 threaded fastener with a 10 mm overall length that secures cylindrical-shank tools reliably in 6 mm chucks; the combination of standard-compliant driving flat and compact dimensions supports efficient tool changes and stable machining. Order the clamping screw directly via Metav Werkzeuge or consult our specialists for application advice. Clamping screw M6 L 10 mm for 6 mm chuck – TECWERK The Clamping screw M6 L 10 mm for 6 mm chuck is a compact clamping bolt for face clamping chucks, designed to hold cylindrical-shank tools with a lateral driving flat in accordance with DIN 1835-B *Designed for face clamping chucks *Clamps cylindrical shank tools DIN 1835-B *Thread M6, length 10 mm for 6 mm chuck Secure, compact design for tight tool retention The compact fastener offers a 10 mm overall length combined with an M6 thread, delivering a secure hold for small-diameter chucks. Its short profile minimises overhang and reduces vibration risk during operations, which is essential when machining with delicate or precision tools. The built-in compatibility with 6 mm chucks and the lateral driving flat ensure positive torque transmission to cylindrical-shank cutters, translating into consistent concentricity and repeatable clamping forces even under cyclic load. Clear technical compatibility and standard conformity Engineered for face clamping chucks, the component is suitable for clamping tools with cylindrical shanks that include a lateral driving flat according to DIN 1835-B. This means the fastener is appropriate for commonly used cutting tools and holders in clamping-technology setups where standardised drive flats ensure correct orientation and secure engagement. The nominal thread M6 and the specified dimensions enable straightforward integration into existing clamping systems without additional modification, supporting fast tool swaps and predictable performance. Practical benefits for workshop efficiency and reliability By choosing this compact clamping bolt, workshops gain a durable and predictable fastening solution that supports efficient changeovers and stable machining results. The simple geometry reduces maintenance effort and inspection time, while the adherence to recognised standards reduces the risk of mismatch with tool shanks. For procurement and supply reliability, Metav Werkzeuge’s sourcing provides a consistent quality check and rapid dispatch from Emmerich, reinforcing operational continuity for industrial and craft applications. For secure and standard-compliant tool clamping select the TECWERK clamping screw for 6 mm chucks — contact Metav Werkzeuge in Emmerich for ordering and technical guidance: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000834134NW Label: Clamping screw M6 L 10 mm for 6 mm chuck TECWERK Product type: Clamping screw Manufacturer: TECWERK Facts Length: 10 mm Thread nominal Ø: M6 Suitable for chuck Ø: 6 mm Pack unit: 1 Special features For face clamping chucks For cylindrical shank tools with lateral driving flat Complies with DIN 1835-B Compact profile for reduced overhang FAQ Is this clamping screw suitable for face clamping chucks only? This clamping screw M6 L 10 mm for 6 mm chuck is primarily designed for face clamping chucks and provides optimal performance in that application, particularly with tools featuring a lateral driving flat. Which tool shank standard does the fastener support? The fastener clamps cylindrical-shank tools with a lateral driving flat in accordance with DIN 1835-B, ensuring correct torque transmission and orientation. What are the critical dimensions to verify before ordering? Check the M6 thread, the 10 mm overall length and compatibility with a 6 mm chuck bore to confirm the part fits the intended clamping system. Can this clamping screw be used with adapters or non-standard chucks? Use with adapters is possible when thread and bore align; however, optimal performance is achieved when used with chucks and tools that meet the stated dimensions and DIN 1835-B specification. Does the SKU 2000834134NW include multiple items per pack? The SKU 2000834134NW is supplied with a pack unit of 1, suitable for targeted replacements or single-item procurement. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
10mm Clamping Screw M8 for 8mm Collet Chuck, DIN 1835-B - TECWERK
Compact, M8-threaded fastening combined with compatibility for 8 mm collet chucks ensures reliable tool retention and rapid replacement in busy workshops; this compact design supports uninterrupted production and straightforward inventory management. Order the TECWERK component via Metav Werkzeuge or consult our specialists for application advice. TECWERK Clamping screw M8 L10 mm — clamping screw for 8 mm collet chucks The Clamping screw M8 L10 mm secures tools with a cylindrical shank and lateral drive surface, intended for use in face clamping chucks and compact spindle applications. M8 threaded fastening Compact length 10 mm For 8 mm collet chucks DIN 1835-B compatible for cylindrical shanks Secure retention for compact installations The TECWERK clamping screw combines an M8 thread with a 10 mm overall length to deliver secure clamping in tight assemblies. Its short profile reduces axial projection while maintaining axial load transfer, which helps to avoid interference in confined spindle or toolholder layouts. For production environments where space and repeatability matter, the compact dimensions provide a dependable balance between accessibility and mechanical stability. Standards and compatibility explained Designed for tools with a cylindrical shank and a lateral drive surface in accordance with DIN 1835-B, this fastening element is optimised for 8 mm collet chucks and face clamping systems. Conforming to that standard ensures consistent engagement with toolholders that rely on the specified lateral slot or drive face, simplifying tool interchange and aligning with common machining tool dimensions used across industry. Production benefits and process reliability Using a dedicated clamping screw with standardised thread and length reduces setup time and inventory complexity while improving process reliability. The simple M8 interface supports quick replacement during maintenance cycles, reducing machine downtime and ensuring steady throughput. By standardising on compact fastening components, workshops can streamline procurement and minimise the risk of incorrect parts entering the toolchain. Practical application and handling notes Installation requires the correct engagement with the chuck and the matching lateral drive on the tool shank; when assembled, the component transmits axial clamping force while the lateral surface prevents rotation. The 8 mm chuck compatibility and DIN 1835-B conformity make this item suitable for general-purpose facing and finishing operations where secure radial alignment and repeatable seating are essential. For procurement and technical guidance on integrating TECWERK clamping screws into workshop setups, contact Metav Werkzeuge for specification support and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000834135NW Label: Spannschraube M8 L.10mm f.Spannfutter-D.8mm TECWERK SKU: 2000834135NW Facts Thread: M8 Length: 10 mm Suitable for collet chuck Ø: 8 mm Packing unit: 1 Special features For face clamping chucks For tools with cylindrical shank and lateral drive surface (DIN 1835-B) Product type: Clamping screw Manufacturer: TECWERK FAQ What thread and length does this fastening use? The TECWERK clamping screw is supplied with an M8 thread and an overall length of 10 mm. Which chucks is the component suitable for? It is suitable for collet chucks with an 8 mm bore and for face clamping chuck arrangements. What tool shank form is required for correct engagement? Compatibility requires a cylindrical shank with a lateral drive surface in line with DIN 1835-B. Is the compact length suitable for tight spindle installations? Yes, the short 10 mm profile reduces axial projection and is intended for compact or space-constrained setups where secure clamping is still required. What is the item number for ordering? The item is listed under SKU 2000834135NW. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
12mm Clamping Screw M10 for 10mm Chuck - TECWERK
Take advantage of the M10 threaded interface and a compact 12 mm overall length for secure, space-saving clamping; ideal for 10 mm chucks and tools conforming to DIN 1835-B. Order the clamping screw directly via Metav Werkzeuge or ask our consultants for application advice. Spannschraube M10 L.12mm f.Spannfutter-D.10mm TECWERK — clamping screw with M10 thread for 10 mm chucks The Spannschraube M10 L.12mm f.Spannfutter-D.10mm TECWERK is a precision clamping screw intended for face clamping chucks and for securing tools with a cylindrical shank and lateral drive face according to DIN 1835-B, optimised for compact toolholding assemblies M10 threaded clamping screw Compact 12 mm overall length Compatible with 10 mm chuck diameters Suitable for tools to DIN 1835-B Precise thread engagement for repeatable setups The M10 thread offers secure mechanical engagement with standard clamping bodies, reducing axial play and helping to maintain repeatable positions across production runs. With adherence to DIN 1835-B for tools with a lateral drive face, the design ensures a reliable interface between the tool shank and the chuck, which translates into consistent concentricity and predictable machining outcomes. This controlled connection reduces setup variability and supports stable running conditions for short, frequent tool changes. Space-saving length that suits compact toolholders A total length of 12 mm keeps the clamping element compact without compromising its clamping function, making it particularly suitable where installation depth is limited. For chucks with a 10 mm bore diameter, this compact profile permits close tool spacing and improves accessibility in tight spindle or turret arrangements. The reduced projection minimises collision risk during tool indexing and contributes to a neater tool assembly that supports faster changeover cycles. Broad compatibility to simplify workshop logistics Designed for use with face clamping chucks, the component accommodates tools featuring a cylindrical shank and lateral drive face, facilitating straightforward integration into existing fixtures. Compatibility with common chuck systems lowers the need for special adaptors and helps standardise spares across a fleet of machines. The clear conformity to established standards makes this clamping element a pragmatic choice for workshops seeking to reduce part variety while maintaining operational flexibility. Practical benefits for production efficiency Choosing a compact, standardised clamping screw improves uptime through quicker installation and dependable clamping force, which in turn reduces rework and inspection effort. The simple geometry and standard M10 interface support fast replacement and interchangeability, helping to keep machine downtime to a minimum. For further clarification on suitability for a particular chuck or application, technical advice is available to ensure correct selection and integration. For tailored advice on integrating this TECWERK clamping screw into existing toolholding systems, contact Metav Werkzeuge for expert guidance and sourcing assistance Technical Data Article number: 2000834136NW Label: Spannschraube M10 L.12mm f.Spannfutter-D.10mm TECWERK Brand: TECWERK Facts Thread: M10 Overall length: 12 mm Recommended chuck Ø: 10 mm Packaging unit: 1 Special features For face clamping chucks For clamping tools with cylindrical shank with lateral drive face Conforms to DIN 1835-B Suitable for compact toolholding assemblies FAQ What thread does the clamping screw use? The clamping screw uses an M10 thread, matching standard clamping bodies for stable engagement. Is this component suitable for a 10 mm chuck? Yes, the clamping screw is designed for 10 mm chuck diameters and compact assemblies. Which tool shank standard is supported? The component supports tools with a cylindrical shank and lateral drive face in accordance with DIN 1835-B. Can this part be used across different face clamping chucks? It is intended for use with face clamping chucks and is compatible with systems that accept an M10 clamping element for 10 mm bores. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Clamping Screw M12 for 12/14mm Collet Chuck, Cylinder Shaft Clamping - TECWERK
Take advantage of the M12 thread, compact L 16 mm length and compatibility with 12/14 mm chucks for consistent, secure clamping in production settings; order direct via Metav Werkzeuge or consult the technical team for application guidance. Clamping screw M12 L16 mm for chuck Ø12/14 mm (TECWERK) — precision clamping fastener for face-type chucks The Clamping screw M12 L16 mm for chuck Ø12/14 mm (TECWERK) is a purpose-built clamping fastener for face-type chucks, intended to secure tools with a cylindrical shank and a lateral drive flat in accordance with DIN 1835-B. M12 thread for secure clamping Compatible with chuck Ø 12/14 mm Length L 16 mm for compact installations Suited to DIN 1835-B tool shanks Secure retention that improves machining reliability The Clamping screw M12 L16 mm for chuck Ø12/14 mm (TECWERK) combines a standard M12 thread with a compact geometry to deliver secure retention of rotating tools. A positive clamping fit reduces micro-movement between tool and chuck, which helps to maintain concentricity and therefore improves machining accuracy. For production environments where repeatability matters, this specification supports stable cutting conditions and reduced scrap rates. Compact form factor for tight setups and retrofits With a nominal length of L 16 mm, the fastener is designed for installations where projection and clearance are limited. The short overall length minimises overhang, which contributes to better dynamic behaviour during machining and easier balancing of assemblies. This compact design is beneficial for retrofitting existing spindle or chuck configurations where space is at a premium, enabling reliable clamping without extensive rework. Conforms to established tool shank standards for torque transfer Compatibility with tools that feature a cylindrical shank and a lateral drive flat to DIN 1835-B ensures secure torque transmission under load. The lateral flat engages with the chuck mechanism, preventing slippage and supporting repeatable tool indexing. Specifying components that match recognised standards simplifies procurement and guarantees interchangeability across common collet and chuck systems. Ready for straightforward integration and reliable supply Supplied as single units, the clamping screw suits focused replacement needs and small-batch maintenance tasks. The compact specification and standard thread make the component straightforward to add to existing spare-part inventories and facilitates predictable stock management. For workshops and production facilities seeking consistent availability, sourcing via an established distributor helps to ensure continuity of supply and documented product traceability. Contact Metav Werkzeuge for tailored advice on integrating the TECWERK clamping screw M12 L16 mm (SKU 2000834137NW); eMail info@metav-werkzeuge.com or call +49 2822 7131930 for rapid technical guidance and order support Technical data Article number: 2000834137NW Product: Clamping screw Label: Clamping screw M12 L16 mm for chuck Ø12/14 mm TECWERK Brand: TECWERK Facts Thread nominal Ø: M12 Length: 16 mm Suitable for chuck Ø D: 12/14 mm Package unit: 1 Special features For face-type chucks For clamping tools with cylindrical shank with lateral drive flat Conforms to DIN 1835-B FAQ Is this clamping screw compatible with standard 12/14 mm chucks? Yes. The component is specified for use with chucks of Ø 12/14 mm and is intended for face-type chuck assemblies as noted in the technical data (SKU 2000834137NW). Can the clamping screw be used with tools to DIN 1835-B? Yes. It is designed to clamp tools that have a cylindrical shank with a lateral drive flat according to DIN 1835-B, ensuring correct engagement and torque transfer. What are the thread size and overall length of the fastener? The fastener features an M12 thread and an overall length of 16 mm, providing a compact solution for standard clamping applications. How is the item supplied for maintenance and replacement? The product is supplied as single units (package unit 1), which suits selective replacement of worn or lost clamping screws. Is the clamping screw intended for heavy-duty machining tasks? The fastener is designed for reliable clamping in standard machining operations where compatibility with DIN 1835-B shanks is required; for high‑demand or specialised applications, component selection should align with the specific machine and process parameters. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Clamping Screw M14 For 16/18mm Collet Chuck - TECWERK
Take advantage of a compact, industry-proven fastener that combines precise thread engagement and direct compatibility with Ø 16/18 mm face clamping chucks for steady tool retention. Order supply or request consultancy directly via Metav Werkzeuge for a seamless addition to the workshop inventory. Clamping screw M14, length 16 mm — for chuck Ø 16/18 mm (TECWERK) The Clamping screw M14 L16 mm for chuck Ø 16/18 mm is a purpose-built clamping fastener for face clamping chucks, designed to secure cylindrical-shank tools with a lateral drive flat in accordance with DIN 1835-B. M14 threaded connection for secure fixation Compact 16 mm overall length for tight setups Compatible with chuck diameters Ø 16/18 mm Suited to DIN 1835-B cylindrical shank tools Reliable thread and geometry for consistent clamping results The component uses an M14 thread together with a short 16 mm overall length to deliver reliable axial preload in confined assemblies. This geometry reduces axial play and helps maintain concentricity during rotating operations, which in turn lowers the risk of vibration and tool runout. Specifying the correct fastener minimises rework and supports continuous production by ensuring repeatable clamping performance. Designed for face clamping chucks and DIN-compliant tools Compatibility with face clamping chucks and tools featuring a lateral drive flat per DIN 1835‑B ensures positive torque transfer and axial restraint for cylindrical shank tooling. The lateral drive flat prevents rotation within the chuck seating, so the fastener secures the tool reliably under load. Explaining DIN 1835‑B in practical terms: it standardises the contact geometry for safe mechanical drive between chuck and tool, reducing slippage and improving machining accuracy. Simple specification supports quick selection and inventory control The compact specification — thread M14, length 16 mm, suitable for Ø 16/18 mm chucks — simplifies procurement and inventory decisions in production and maintenance settings. The straightforward characteristic set reduces ordering errors and shortens lead times, while the single-item packaging unit facilitates stock keeping for small batches or one-off replacements. Choosing a standardised clamping fastener like this also reduces the variety of spare parts needed on the shop floor, improving overall operational efficiency. Confidence through compatibility and supply reliability Selecting a recognised fastener from an established brand supports workshop reliability and peace of mind during demanding operations. The product’s straightforward mechanical function and standard compliance make it a pragmatic choice for engineering shops and maintenance departments that value durable, predictable clamping. Combined with Metav’s role as a quality filter for European supply, procurement benefits from consistent availability and documented conformity to industry norms. Contact Metav Werkzeuge for supply and technical advice on the TECWERK clamping screw M14 L16 mm to ensure compatibility with specific chuck models and to arrange prompt delivery from stock. Technical data Article number: 2000834138NW Product: Clamping screw, fastener Brand: TECWERK Facts Thread: M14 Overall length: 16 mm Suitable for chuck Ø: 16/18 mm Special features For face clamping chucks For cylindrical-shank tools with lateral drive flat per DIN 1835‑B Packaging unit: 1 FAQ What chuck diameters is this fastener suitable for? The clamping screw is suitable for chucks with an internal diameter of Ø 16/18 mm and secures tools accordingly. Which thread and overall length are specified for this product? This TECWERK clamping screw features an M14 thread and an overall length of 16 mm (SKU 2000834138NW). Can this fastener be used with tools to DIN 1835‑B? Yes — the fastener is intended for use with cylindrical-shank tools that have a lateral drive flat as specified by DIN 1835‑B. How does the lateral drive flat affect clamping performance? The lateral drive flat provides positive drive engagement with the chuck seating, improving torque transfer and preventing rotational slippage under load. Is this component suitable for confined or compact assemblies? The short 16 mm length is optimised for compact setups where axial space is limited while still providing secure clamping. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
16mm Clamping Screw M16 for 20mm Collet Chuck, For Cylindrical Shank Tools DIN 1835-B - TECWERK
Take advantage of a compact, standardised clamping solution that combines precise thread engagement and space-saving design for efficient workshop setups; order directly via Metav Werkzeuge or ask the consultants for tailored advice. TECWERK Clamping Screw M16, L 16 mm for Ø 20 mm Chucks The Clamping screw M16 L 16 mm for Ø 20 mm chucks is a compact clamping component for flat-jaw chucks, engineered to secure tools with cylindrical shanks and lateral drive according to DIN 1835‑B. For flat-jaw chucks with Ø 20 mm Thread nominal diameter M16 Short overall length L 16 mm Compatible with DIN 1835‑B shank tools Precision hold for repeatable machining results A compact clamping screw with a defined M16 thread provides a reliable mechanical connection between chuck and tool, reducing runout and improving repeatability. The compatibility with a Ø 20 mm chuck ensures standardised seating, which is particularly valuable for series production and frequent tool changes. Because the component is designed for tools with a cylindrical shank and a lateral drive in accordance with DIN 1835‑B, the user benefits from predictable torque transmission and secure axial retention—both essential for maintaining consistent part quality across batches. Space-saving design that simplifies setups With an overall length of L 16 mm, this clamping bolt suits assemblies where installation space is limited. The short profile minimises tool overhang and helps keep the centre of gravity close to the spindle, which lowers vibration and supports higher precision at the cutting edge. For workshops and production cells that prioritise compact tooling and quick changeover, the reduced length translates directly into faster set-ups and fewer collisions, enhancing operational efficiency without compromising secure clamping. Clear conformity and practical workshop benefits Adherence to the lateral-drive specification of DIN 1835‑B means the component integrates with a wide range of modern toolholders and collets, simplifying procurement and inventory management. Supplied as single units, the part is useful for targeted replacements or gradual fleet standardisation. The straightforward geometry and standard thread allow technicians to assess compatibility at a glance, reducing downtime during maintenance and contributing to steady throughput in day-to-day machining operations. For secure, space-efficient clamping with TECWERK quality, contact Metav Werkzeuge for product advice or to arrange supply; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 2000834139NW Label: Spannschraube M16 L.16mm f.Spannfutter-D.20mm TECWERK Manufacturer: TECWERK Packaging unit: 1 Core data Thread: M16 Overall length: 16 mm Suitable for chuck Ø: 20 mm Special features For flat-jaw chucks For cylindrical shank tools with lateral drive (DIN 1835‑B) Short overall length for compact setups FAQ What chuck size is this clamping screw compatible with? The clamping screw is specified for use with chucks of Ø 20 mm, ensuring standard compatibility for many flat-jaw chuck systems. Which thread and length does the part use? This component features an M16 thread and an overall length of 16 mm, as indicated on the product label (SKU 2000834139NW). Can this be used with tools that follow DIN 1835‑B? Yes, the design is suitable for tools with cylindrical shanks and lateral drive in accordance with DIN 1835‑B, providing secure drive engagement. Is the clamping screw suitable for compact installations? The short profile (L 16 mm) is intended for installations with limited axial space, helping to reduce tool overhang and potential interference. How is the item supplied in terms of packaging? The part is supplied as a single unit (packaging unit 1), suitable for replacement or incremental fleet update. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
20mm Clamping Screw M18x2 For 25mm Collet Chuck, Length 20mm - TECWERK
Reliable compatibility with 25 mm collet chucks, combined with a standard M18 x 2 thread and compact 20 mm length, ensures consistent tool retention and easy interchange in clamping systems. Order the clamping screw directly via Metav Werkzeuge or consult our advisers for application support. Clamping screw M18 x 2 L 20 mm for 25 mm collet chuck — TECWERK A Clamping screw M18 x 2 L 20 mm designed for use with Ø 25 mm collet chucks, suitable for clamping tools with cylindrical shanks featuring a lateral drive surface to DIN 1835-B. M18 x 2 thread for standardised fit Compact 20 mm overall length Compatible with Ø 25 mm collet chucks Conforms to DIN 1835-B drive geometry Precise interfacing with standard collet systems The clamping screw provides a standardised M18 x 2 connection and a short, defined 20 mm overall length that supports reproducible seating in collet-based holders. By matching the nominal thread and the specified dimensions, the component minimises axial play and ensures repeatable positioning when used with Ø 25 mm collet chucks. This leads to reliable concentricity during spindle rotation and reduces the need for frequent re-centring, which is particularly valuable in batch production and high-precision workshop settings. Secure torque transfer and reliable tool retention Designed for tools with a cylindrical shank and a lateral drive surface to DIN 1835-B, the screw facilitates positive torque transmission between chuck and tool; the lateral drive surface prevents slippage under cutting loads. When installed correctly in a compatible chuck, the part supports consistent clamping force and reduces the risk of tool runout. This mechanical clarity simplifies setup procedures and contributes to predictable machining outcomes, improving process stability on the shop floor. Streamlined integration and lower downtime With a compact profile and standard thread form, the component fits established clamping workflows without custom adaptation. Parts exchange is straightforward, which shortens maintenance intervals and keeps spindle idle time to a minimum — a clear efficiency advantage for production environments. Combined with Metav’s logistics and supply reliability, procurement and replenishment become a predictable part of workshop planning, supporting continuous operation and straightforward stock management. Application scope and practical considerations The screw is intended for use with face-style clamping chucks and for securing tools that comply with the DIN 1835-B shank specification; it is therefore well suited to general-purpose turning and milling tool clamping where a lateral drive surface is present. As material information is not specified in the available data, verification against the chuck manufacturer’s recommendations is advised when specific material or heat-treatment properties are required. Where interchangeability with existing tooling is a concern, refer to chuck diameter and drive-surface compatibility first to confirm fit. Contact Metav Werkzeuge for tailored technical advice and reliable supply of TECWERK clamping screws for Ø 25 mm collet chucks Technical data SKU: 2000834140NW Label: Spannschraube M18x2 L.20mm f.Spannfutter-D.25mm TECWERK Product type: Clamping screw Manufacturer: TECWERK Thread: M18 x 2 Overall length: 20 mm Suitable for: Collet chuck Ø 25 mm Packaging unit: 1 UID: 2000834140NW Facts Thread nominal diameter: M18 x 2 Length (L): 20 mm Compatible chuck diameter: 25 mm Packaging unit: 1 Special features For face clamping chucks For clamping tools with cylindrical shank and lateral drive surface to DIN 1835-B Compact design for minimal axial play FAQ Is this screw compatible with collet chucks other than 25 mm? Compatibility is determined by the chuck’s specified clamping diameter; this clamping screw is intended for use with collet chucks of Ø 25 mm and may not seat correctly in other sizes. What does DIN 1835-B mean for tool shanks? DIN 1835-B specifies a cylindrical shank with a lateral drive surface; the clamping screw and matching chuck transmit torque via that drive surface to prevent slippage during machining. Can the screw be used with any face clamping chuck? The screw is designed for face clamping chucks that accept an M18 x 2 fixing and a 25 mm clamping interface; verification against the chuck manufacturer’s specifications is recommended. How many items are supplied per packaging unit? The packaging unit is 1, so each shipment contains a single clamping screw. Is special installation tooling required? No special tooling is listed for basic installation; standard tightening procedures for screws with an M18 x 2 thread are applicable, though adherence to the chuck supplier’s assembly instructions is advised. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
20mm Clamping Screw M20x2 For 32mm Chuck, L20mm - TECWERK
Benefit from secure, repeatable clamping thanks to the M20 x 2 thread and compact 20 mm overall length, optimised for 32 mm clamping chucks. Order this clamping element directly via Metav Werkzeuge or consult our specialists for application-specific guidance. Clamping screw M20 x 2 x 20, L 20 mm by TECWERK — for 32 mm clamping chucks The clamping screw M20 x 2 x 20 is a compact securing element designed for face chucks and for clamping tools with cylindrical shanks featuring a lateral driving surface to DIN 1835-B. M20 x 2 thread for secure clamping Length 20 mm for compact toolholders Designed for 32 mm clamping chuck Suitable for cylindrical shank tools DIN 1835-B Consistent clamping where space is limited The design delivers a compact 20 mm overall length that permits robust fastening within tight toolholder assemblies. The defined M20 x 2 thread provides reliable axial engagement, reducing play during torque transfer and supporting consistent repeatability in short-stroke clamping operations. For workshops that prioritise efficient set-up and minimal intrusion into the tool envelope, this compact clamping element helps maintain process stability and reduces rework. Broad compatibility with standard tool systems Built for use with 32 mm clamping chucks, this component is suitable where tools with cylindrical shanks and a lateral driving surface according to DIN 1835-B are employed. The geometry supports common clamping strategies in metalworking and maintenance shops, allowing integration into existing face-chuck systems without adapter modifications. Compatibility like this streamlines inventory and simplifies procurement for maintenance departments and small production cells. Durable function and straightforward integration Though compact, the clamping screw is engineered for dependable engagement under regular workshop loads. The standardised thread and dimensions enable simple replacement and interchangeability, which minimises downtime. Clear nominal values and standard interfaces mean inspection and checks can be performed with routine gauges, supporting quality assurance workflows and ensuring measurable, verifiable clamping performance across batches. Procurement confidence and technical support from Metav Metav combines a wide product range with practical purchasing support to make precision components accessible to every workshop. The availability of standardised fastening elements, paired with transparent logistics from Emmerich, reduces supplier complexity and helps maintain production continuity. For specific application questions or to confirm fitment in specialised setups, technical advice is readily available to complement the product documentation. For reliable integration of TECWERK clamping components, contact Metav Werkzeuge for tailored advice and quick supply from Emmerich: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: 2000834141NW Label: Clamping screw M20 x 2 x 20 L 20 mm TECWERK Product type: Clamping screw Brand: TECWERK Facts Thread: M20 x 2 x 20 Overall length: 20 mm Suitable for chuck Ø: 32 mm Packaging unit: 1 Special features For face chucks For clamping tools with cylindrical shank Lateral driving surface to DIN 1835-B Nominal thread diameter M20 x 2 x 20 FAQ What chuck size is this clamping screw made for? This clamping screw is specified for use with a 32 mm clamping chuck and suits systems designed for that chuck diameter. Can the clamping screw be used with tools to DIN 1835-B? Yes, the component is intended for clamping tools with a cylindrical shank and lateral driving surface according to DIN 1835-B. What is the product identification for ordering? Order using SKU 2000834141NW for the TECWERK clamping screw M20 x 2 x 20. Is the thread specification standardised for workshop replacement? The M20 x 2 thread follows standard nominal values, enabling straightforward replacement and interchange in compatible toolholders. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com