32mm Drive Ring For 16mm Arbor, For Keyed Slot Milling Cutters, DIN 6366 - TECWERK
Take advantage of the standardised fit and compact design to ensure reliable torque transmission and simple integration into existing arbor systems; order the part directly via Metav Werkzeuge or contact their consultants for clarification on compatibility and supply. TECWERK drive collar 32 mm (for 16 mm arbors) – DIN 6366 The TECWERK drive collar 32 mm is a compact drive component, compliant with DIN 6366, engineered to transfer torque to mounted cutters with a transverse groove and to fit 16 mm arbor shanks. DIN 6366 compliance for standardised fit Designed for mounted cutters with transverse groove Compatible with 16 mm arbor shanks Outer diameter 32 mm for secure engagement Reliable torque transfer for mounted cutters The drive collar delivers consistent mechanical engagement between the arbor and mounted cutters, ensuring dependable transmission of rotational force. By engaging the cutter’s transverse groove, the component reduces the risk of slippage under load, which supports uninterrupted machining cycles. Compliance with DIN 6366 guarantees interchangeability with other standardised components, simplifying maintenance planning and spare-part management for small workshops and production facilities alike. Standardised geometry for straightforward integration With its compact geometry, the component is designed to sit precisely on a 16 mm arbor shank and engage mounted cutters with transverse grooves. The standardised design allows fast replacement and predictable alignment, which reduces setup time during cutter changes. For operators less familiar with technical specifications, the collar can be understood as a simple mechanical interface: it locks into a groove on the cutter and the arbor, converting the spindle’s rotation into usable cutting torque without additional adapters. Practical workshop benefits and trusted supply In routine workshop use, the collar’s straightforward function supports reliable machining of profiles and edges when used with compatible mounted cutters. The compact outer diameter provides secure engagement while keeping the assembly small and easy to handle, which is particularly useful where space on the arbor is limited. Supplied as a single unit, the part helps maintain a minimal inventory strategy when paired with other standardised components from a single supplier, reducing administrative overhead and complexity. Choose the TECWERK drive collar for standardised, reliable torque transfer and contact Metav Werkzeuge for technical guidance or procurement from their Emmerich centre Technical data Article number: 2000834086NW Product: Drive collar (Mitnehmerring) Brand: TECWERK Packaging unit: 1 Description: to transfer mounted cutters with transverse groove, compliant with DIN 6366, for use on mounted cutter arbors Dimensions / Core data Outer diameter: 32 mm Arbor fit diameter: 16 mm a dimension: 10 mm b dimension: 8 mm h dimension: 5 mm Applications / Special features Standard: DIN 6366 Intended for mounted cutters with transverse groove Fits mounted cutter arbors (Aufsteckfräserdorne) Compact, standardised design for easy replacement FAQ What is the primary application of this drive collar? The drive collar is intended for torque transfer to mounted cutters with a transverse groove; the TECWERK drive collar 32 mm secures engagement between cutter and 16 mm arbor shank. Which arbor diameter does the collar fit? The collar is designed to fit a 16 mm arbor shank, providing a standardised connection for compatible mounted cutters. Is this component compatible with industry standards? Yes, the part conforms to DIN 6366, ensuring compatibility with other standardised fittings and reducing the need for custom adapters. How is the item identified for ordering or stock management? The item is listed under article number 2000834086NW (SKU 2000834086NW) and described as a TECWERK drive collar for mounted cutters. Can the collar be used in compact setups with limited arbor space? The compact outer diameter of 32 mm and low-profile dimensions make the collar suitable for installations where space on the arbor is restricted. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
40mm Drive Ring For 22mm Arbour, For Slot-Coupled Milling Cutters, DIN 6366 - TECWERK
Robust DIN 6366 compliance and precise fit for mounted cutters with a transverse groove ensure reliable torque transmission; with clear dimensional data (d 22 mm, D 40 mm, a 12 mm, b 10 mm, h 5.6 mm), the drive ring supports consistent machining accuracy and simple stock management — order directly via Metav Werkzeuge or contact our advisors for matching arbors and spare parts. TECWERK Drive Ring for Ø22 mm Arbor (DIN 6366) – Positive-drive coupling The TECWERK Drive Ring is a DIN 6366-compliant coupling ring designed to transfer torque from mounted cutters with a transverse groove to matching arbors, offering standardised compatibility for toolrooms and production workshops. DIN 6366 compliance Fits Ø22 mm bore, D 40 mm outer diameter For cutters with transverse groove Precise positive-drive engagement Secure torque transmission for consistent machining results A standardised drive ring that meets DIN 6366 provides a defined mechanical interface between cutter and arbor, reducing slippage and wear. The ring engages the cutter's transverse groove to create a positive drive, which converts spindle torque directly into cutter rotation. This technical design mitigates micro-movements under load, enhancing concentricity and therefore the overall machining accuracy of mounted milling operations. Clear compatibility data to simplify tool management Marked dimensions such as d 22 mm (bore) and D 40 mm (outer diameter), together with the specified a 12 mm, b 10 mm and h 5.6 mm, allow quick verification when matching the component to existing arbors and cutters. Using standardised coupling parts reduces inventory complexity and downtime: maintenance teams and purchasing agents can identify replacements unambiguously and keep production running with minimal interruption. Practical benefits on the shop floor and in the supply chain The coupling ring’s straightforward function supports fast replacement and reliable repeatability during cutter changes, which is especially valuable in high-mix or short-run production. By ensuring secure mechanical engagement, the component contributes to predictable tool performance and fewer rejects. Suitable for workshop environments and tool distributors, the part supports operational continuity without requiring additional calibration or special fixtures. For standardised, reliable clamping of mounted cutters, source the TECWERK drive ring through Metav Werkzeuge — contact Metav Werkzeuge for advice, availability and compatible arbors at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: 2000834087NW Label: Drive ring for arbor Ø22 mm (TECWERK) Product type: Drive ring Brand: TECWERK Packing unit: 1 Dimensions Bore (d): 22 mm Outer diameter (D): 40 mm a: 12 mm b: 10 mm h: 5.6 mm Applications / Special features Complies with DIN 6366 For mounted cutters with transverse groove Suitable for use with mounted cutter arbors Positive-drive coupling for reliable torque transfer FAQ What standard does this drive ring conform to? The drive ring conforms to DIN 6366, ensuring a standard interface for mounted cutters with a transverse groove. Which bore and outer diameter are specified for this ring? The component is specified with a bore of 22 mm and an outer diameter of 40 mm (SKU 2000834087NW). Can this ring be used with any mounted cutter? This ring is suitable for mounted cutters that feature a transverse groove and match the listed dimensions; compatibility depends on cutter groove geometry and arbor design. How does the coupling ring improve machining accuracy? By providing a positive drive engagement, the ring reduces slippage and maintains concentricity, which supports consistent cutting conditions and improved surface quality. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
46mm Drive Collar For Clamping Arbor 27mm Cutter Slot, 12mm Axial/12mm Radial/6.3mm Height - TECWERK
Take advantage of a standardised, DIN 6366-compliant ring that transmits torque cleanly to cutters with a transverse key; its compact dimensions (fits a 27 mm arbor with 46 mm outer diameter and 6.3 mm engagement) support fast, repeatable setups on mounted cutter arbors. Order the part directly via Metav Werkzeuge or request compatibility advice from our consultants. Drive ring for 27 mm arbor (Mitnehmerring) — DIN 6366, 46 mm outer diameter (TECWERK) Drive ring for 27 mm arbor designed to transmit torque to mounted cutters with a transverse key, suitable for use with mounted cutter arbors and compliant with DIN 6366 DIN 6366-compliant drive ring For cutters with transverse keyway Fits 27 mm arbor, 46 mm outer diameter Robust 6.3 mm engagement height Secure torque transmission for mounted cutters A standardised DIN 6366 design ensures the ring provides reliable, repeatable torque transfer to cutter bodies that have a transverse key. By engaging the keyway directly, the drive ring reduces rotational play and improves machining consistency, which translates into fewer rejects and less time spent on rework. This functional clarity makes the component an efficient choice for production environments where secure drive engagement matters. Compact dimensions that simplify integration With an outer diameter of 46 mm and a bore for a 27 mm arbor, the component fits neatly into common mounted cutter arbor assemblies. The specified 6.3 mm engagement height and matching shoulder measurements (a and b at 12 mm) permit secure seating without excessive bulk, enabling machines to retain their original clearance and balance. These compact dimensions help to shorten setup time and allow straightforward replacement in existing tool holding systems. Clear specifications to support procurement and inventory The part's concise technical specification removes ambiguity during procurement: standard compliance, intended use for cutters with a transverse key, and explicit dimensional values allow purchasing managers and toolroom planners to order the correct item with confidence. The fixed design lowers the risk of incorrect variants entering the tool cabinet and helps to maintain steady production flow through predictable interchangeability and straightforward stock keeping. For supply queries or compatibility checks on the TECWERK drive ring, contact Metav Werkzeuge in Emmerich for prompt advice and reliable delivery to the workshop bench. Technical data Article number: 2000834088NW Label: Drive ring for 27 mm arbor (Mitnehmerring) Manufacturer: TECWERK Dimensions d: 27 mm D: 46 mm a: 12 mm b: 12 mm h: 6.3 mm Packaging unit: 1 Special features DIN 6366-compliant For cutters with transverse keyway Suitable for mounted cutter arbors FAQ Which arbor diameter does this drive ring fit? The drive ring fits a 27 mm arbor and is specified for use with mounted cutter arbors; reference SKU 2000834088NW for ordering. What standard does the ring conform to? The component is compliant with DIN 6366, which defines form and function for this style of drive engagement. What are the key dimensions of the part? Key dimensions: bore d = 27 mm, outer D = 46 mm, a = 12 mm, b = 12 mm, engagement height h = 6.3 mm. How does the ring secure the cutter on the arbor? The ring engages the cutter’s transverse keyway so torque is transmitted directly through the key engagement and the specified 6.3 mm engagement height ensures consistent mechanical contact. Manufacturer / Responsible: NORDWEST Handel AG; Robert-Schuman-Straße 17; 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com