150mm SK40 Tool Holder For Assembly System, Compatible With DIN 69871/JIS B/DIN 2080 - TECWERK
Take advantage of a standards-based interface and trouble-free integration for consistent production results; the combination of a true SK40 taper, conformity to DIN 69871 / JIS B / DIN 2080, and a compact single-piece design supports reliable toolholding and efficient setup. Order the adapter directly via Metav Werkzeuge or consult the team for application advice. SK40 Mounting Adapter (Holder for Montagesystem) — SK40 taper, TECWERK compatibility SK40 Mounting Adapter for mounting-system use; provides a standardised toolholder interface for machine and workshop installations. SK40 taper according to DIN 69871 / JIS B / DIN 2080 Compatible with Montagesystem Art.-Nr. 2000832115 Precision interface for reliable toolholding Single-piece design for straightforward mounting Engineered for dependable, low run-out toolholding The adapter uses the SK40 taper standard to create a repeatable, concentric connection between spindle and tooling. Conformity with DIN 69871, JIS B and DIN 2080 means the interface matches common international tooling systems, reducing adaptation time and enabling predictable machining results. The standardised taper reduces radial run-out and vibration risk, which leads to improved surface finish and longer tool life — a clear efficiency gain for production and maintenance processes. Fast integration with existing TECWERK mounting systems Designed specifically for the TECWERK mounting environment, the interface is marked as compatible with the Montagesystem Art.-Nr. 2000 832 115, facilitating direct replacement or upgrade without redesign. The precision interface and compact construction support quick installation on existing fixtures and jigs, minimising machine downtime. For workshops seeking straightforward retrofits, the adapter’s adherence to established standards simplifies procurement and inventory management by enabling cross-compatibility with other SK40 tooling. Stability and workshop supply confidence for continuous operation A robust, single-piece construction delivers mechanical stability under typical workshop loads while keeping the mounting routine uncomplicated. Combined with Metav’s role as a precision partner — offering broad product range and dependable logistics from Emmerich — buyers gain both product quality and supply-chain reliability. The adapter’s standards compliance and design focus help secure process stability, so production planners can prioritise throughput and repeatability with confidence. Contact Metav Werkzeuge for tailored integration advice and secure the TECWERK SK40 adapter for swift incorporation into the mounting system. Technical data Article number: 2000832116NW Label: Aufnahme SK40 (DIN 69871, JIS B, DIN 2080) z.Montagesystem TECWERK Manufacturer: TECWERK Facts SKU / UID: 2000832116NW Packaging unit: 1 Special features Taper: SK40 (DIN 69871, JIS B, DIN 2080) Compatible with Montagesystem Art.-Nr. 2000 832 115 Product type: Holder for mounting system Enrichment note: for Montagesystem Art.-Nr. 2000 832 115 FAQ What taper standards does the adapter follow? The adapter follows the SK40 taper standard and is specified to DIN 69871, JIS B and DIN 2080 for interchangeability. Is this adapter compatible with the TECWERK mounting system? Yes — the product is described as compatible with the Montagesystem referenced as Art.-Nr. 2000 832 115 and intended for use in that mounting environment. What is the item number for ordering or reference? The SKU for the TECWERK mounting adapter is 2000832116NW and can be used for ordering and inventory tracking. Is the material specified for the adapter? The supplied product data does not include a material specification for this adapter. How many units are supplied per package? The packaging unit indicated in the product data is 1. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
150mm Swivel Assembly System Quick-Change Aluminium Housing, Indexable 4x90° - TECWERK
Combining the swivel indexing and interchangeable steel tool holders with an aluminium housing delivers a compact, robust mounting solution that enables safe, seconds-fast tool changes and minimal footprint; order the TECWERK mounting system directly via Metav Werkzeuge or consult our specialists for application advice. TECWERK Swivel Base Mounting System – Base Unit with Indexing The TECWERK swivel base mounting system is a compact clamping solution for secure and rapid exchange of tool holders in workshop and assembly environments. Swivel base with 4 x 90° indexing Aluminium housing, low space requirement Interchangeable steel tool holders Seconds-fast, secure tool change Speed up changeovers and keep production moving The swivel base is designed for fast tool changeovers, providing indexable positions that cut changeover time and reduce machine downtime. The unit’s indexable 4 x 90° arrangement offers repeatable, clearly defined tool positions, which simplifies process planning and minimises setup errors. With a form-fit fixing system, the mounting frame ensures that tools are held securely during operation, supporting consistent cycle times and reliable part quality. The overall result is a measurable improvement in operational throughput and predictable production flow. Robust, compact construction for confined workspaces A lightweight aluminium housing combines corrosion resistance with stiffness, allowing the unit to be installed where space is limited without compromising rigidity. The compact footprint makes the mounting frame suitable for dense tooling stations and multi-spindle arrangements. The construction reduces the need for additional clearance and enables closer placement of fixtures, supporting more efficient use of floor and workbench space while maintaining the structural properties required for accurate positioning. Preserve tool integrity and ensure repeatable accuracy The mounting system features interchangeable steel tool holders and a form-fit fixation that prevents slippage and avoids damage to the spindle taper. By eliminating direct cone abrasion, the design extends the service life of both tools and machine interfaces, lowering maintenance frequency and cost. The positive-lock clamping principle supplies consistent concentricity and repeatability, which is essential for applications where tool runout and positioning precision affect part tolerances. Ergonomic handling for faster, safer workflows Ergonomics are built into the device to reduce operator effort during tool changes, requiring lower handling force and enabling safe, efficient swaps in seconds. The pivoting base allows simple access to each indexed position, while the quick-release concept lowers the physical strain associated with repetitive changes. These features support higher uptime and a better working environment, helping teams to maintain pace without sacrificing safety or introducing handling-related errors. Choose the TECWERK swivel base unit for compact, reliable tool changes and contact Metav Werkzeuge for tailored advice and supply from Emmerich. Technical data Article number: 2000832115NW Manufacturer: TECWERK Product type: Mounting system – base unit (swivel) Facts Indexing positions: 4 x 90° Packaging unit: 1 Special features Aluminium housing Interchangeable steel tool holders Swivelable and indexable Form-fit fixation of tools No spindle taper damage Low space requirement Reduced handling force through ergonomic design Tool change in seconds FAQ How is the indexing arranged and how many positions are available? The unit offers an indexable arrangement with four positions at 90° increments, enabling clear, repeatable tool locations for the TECWERK swivel base mounting system (SKU 2000832115NW). Can the system prevent damage to the machine taper? Yes, the mounting solution uses a form-fit fixation that avoids cone abrasion, so the design protects the spindle taper and prolongs interface life. What materials are used for the housing and tool holders? The base features an aluminium housing for a compact, rigid assembly, while the tool holders are supplied as interchangeable steel components for durability and precision. Is the mounting system suitable for small workshops with limited space? The compact design and low footprint make the unit suitable for confined work areas where space efficiency is required without loss of functionality. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
155mm x 97mm x 180mm Assembly Block SK50 Aluminium For Safe Tool Mounting, Securing Screw - TECWERK
Take advantage of a compact, aluminium mounting solution that enables safe assembly and disassembly of steep‑taper tool holders in both horizontal and vertical positions; the built‑in safety screw and bench‑mountable design support fast changeovers and reliable workshop handling. Order the unit directly via Metav Werkzeuge or consult our experts for application advice. Mounting Block SK50 TECWERK — Aluminium mount for SK50 tool holders, bench‑mountable The Mounting Block SK50 TECWERK is a workshop fixture designed for secure and effortless assembly and disassembly of tool holders with a steep taper, suitable for use in both horizontal and vertical orientations. Aluminium construction for low weight and durability Secure fitting for SK50 steep-taper tool holders Suitable for horizontal and vertical mounting Bench-mountable with safety screw to prevent fall-out Secure handling for steep‑taper tool holders with reduced downtime The fixture delivers a practical solution for handling steep‑taper (SK) tool holders: by providing a stable support for insertion and removal, the device reduces the risk of accidental drops and misalignment during tool change procedures. The design focuses on dependable clamping of the taper interface; this ensures consistent seating and quick, repeatable operations, which directly shortens machine downtime and streamlines workshop workflows. The combination of a dedicated taper interface and a retention mechanism translates into safer, quicker tool changes and improved process reliability. Durable aluminium construction that stays reliable in daily use Manufactured from aluminium, the block balances lightweight handling with the rigidity required for workshop environments. The material choice reduces lifting effort when positioning the fixture on the bench, while offering good resistance to corrosion and wear typical of metalworking settings. The robust body resists deformation under normal use, preserving accurate alignment over repeated cycles. This longevity lowers the need for frequent replacement, supporting a cost‑effective workshop routine without compromising on operational stability. Flexible mounting orientation and a safety‑first retention concept Designed for both horizontal and vertical use, the mount allows versatile positioning to match the workflow of assembly benches or tooling stations. The integrated safety screw secures the tool holder during horizontal operations, preventing inadvertent fall‑out and improving operator safety. Its bench‑mountable configuration ensures a stable working base, enabling controlled insertion and removal even under constrained conditions. These features combine to reduce the chance of damage to tool holders and to the workbench, while making changeovers more predictable and controlled. Exact dimensions for consistent positioning and compatibility The block’s measured footprint of 97 x 155 x 180 mm supports a compact but stable platform for tool handling; the specified height of 155 mm provides a practical working elevation for most bench setups. The fixture is purpose‑matched to accept SK50 taper interfaces and is tailored to the spatial demands of steep‑taper tool holders. Clear dimensional data allows planners to incorporate the mount into existing tooling stations or fixturing systems without guesswork, ensuring predictable positioning and straightforward integration into workshop routines. For reliable, bench‑ready handling of SK50 tool holders, contact Metav Werkzeuge for technical guidance and to secure supply through their European distribution. Technical Data Article number: 2000832878NW Product: Mounting block Taper interface: SK50 Packing unit: 1 Facts Dimensions: 97 x 155 x 180 mm Height: 155 mm Width: 97 mm Length: 180 mm Special features Material: Aluminium For secure assembly and disassembly of steep‑taper tool holders Suitable for horizontal and vertical mounting Stable and trouble‑free bench mounting Safety screw to secure tool holder against fall‑out during horizontal use FAQ Which taper sizes does the mount accept? The mount is specified for the SK50 taper interface and is designed to accommodate SK50 steep‑taper tool holders. Is the fixture suitable for both horizontal and vertical tool change operations? Yes; the unit supports both horizontal and vertical mounting and includes a safety screw to prevent the tool holder from falling out during horizontal use. What material is the block made from and what are the benefits? The block is made from aluminium, offering a lightweight yet rigid support that resists corrosion and reduces handling effort in everyday workshop tasks. How does the safety screw improve operational safety? The safety screw secures the tool holder in the mount during horizontal operations, preventing accidental disengagement and reducing the risk of damage to tooling or injury. Can the mounting block be fixed to a workbench? The design allows stable bench mounting for reliable positioning during assembly and disassembly procedures. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
60 x 100 x 160 Montage Block SK40 Aluminium Mounting Block With Safety Screw - TECWERK
Benefit from the aluminium construction and secure SK40 taper support for fast, reliable toolholder changes; the compact design and integrated screw lock ensure stable bench mounting and safe horizontal operation — order directly via Metav Werkzeuge or consult our specialists for application advice. Montageblock SK40 Alu.TECWERK — aluminium mounting block with SK40 taper and secure screw lock The Montageblock SK40 Alu.TECWERK is a compact aluminium mounting block designed for safe assembly and disassembly of steep-taper toolholders in both horizontal and vertical positions Solid aluminium construction Secure SK40 taper support Horizontal and vertical use Screw lock prevents toolholder drop Reliable clamping for safe and accurate tool changes The mounting fixture combines a robust aluminium body with a precisely formed SK40 taper, delivering a secure seat for steep-taper toolholders and reducing the risk of play during handling. Thanks to the built-in screw lock, the toolholder is held firmly in place during horizontal assembly, which lowers the chance of accidental drops and supports safer workshop routines. This stability translates directly into fewer interruptions during tool changes and a reduced need for readjustments. Faster setups with straightforward handling A compact fixture that allows mounting in both horizontal and vertical positions speeds up workshop workflows by eliminating the need for multiple dedicated tools. The device’s design enables easy assembly and disassembly of toolholders, so changeovers are quicker and more efficient. For operations where time and repeatability matter, the ability to secure the toolholder reliably on the bench reduces setup time and contributes to a consistent production rhythm. Compact, durable design built for the workbench With a compact footprint and clearly defined dimensions, the unit fits neatly on standard workbenches and resists the daily wear of shop use. The aluminium construction offers a favourable strength-to-weight ratio: sturdy enough for repeated use while remaining easy to reposition when needed. The fixture has been conceived as a practical workshop companion that supports precise handling of steep-taper holders and keeps bench areas organised and safe. Contact Metav Werkzeuge for ordering details or technical advice on the TECWERK SK40 mounting block; our Emmerich team will help match the fixture to specific workshop requirements Technical information Article number: 2000832877NW Label: Montageblock SK40 Alu.TECWERK Product type: Mounting block Taper: SK40 Packaging unit: 1 Dimensions & key measures Width: 60 mm Height: 100 mm Length: 160 mm Materials & features Material: Aluminium For safe assembly/disassembly of steep-taper toolholders Usable in horizontal and vertical positions Stable, problem-free mounting on the workbench Securing screw to prevent toolholder from falling during horizontal use FAQ How does the block secure SK40 toolholders? The integrated screw lock holds the SK40 taper firmly in place, and the aluminium seat ensures a snug fit that prevents lateral movement when using the Montageblock SK40 Alu.TECWERK. Can the fixture be used vertically as well as horizontally? Yes, the design supports both horizontal and vertical mounting positions, enabling flexible handling of steep-taper toolholders during assembly and disassembly. What material is the mounting block made from and why does it matter? Constructed from aluminium, the block balances strength and weight, offering durable support while remaining easy to handle on the workshop bench. What are the exact dimensions of the mounting block? The mounting block measures 60 mm × 100 mm × 160 mm, as specified for the Montageblock SK40 Alu.TECWERK (SKU 2000832877NW). Is the product suitable for permanent bench installation? Yes, the unit is intended for stable bench mounting and designed for repeated use without compromising the secure seating of toolholders. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
HSK-A63 Tool Holder For Assembly System, Compatible With Montage System - TECWERK
Take advantage of a standardised HSK interface and proven compatibility with TECWERK mounting systems to streamline fixture setup and reduce interchange time. The HSK-A63 holder connects directly with the referenced mounting system (Art.-No. 2000832115) and is supplied as a single unit; order via Metav Werkzeuge or consult the Metav team for configuration advice. HSK-A63 holder for mounting system — TECWERK mounting-system adapter HSK-A63 holder for secure integration with TECWERK mounting systems, designed to accept standard HSK-A63 tool interfaces in fixture assemblies HSK-A63 interface compatibility Compatible with mounting system Art.-No. 2000832115 Single-piece packaging for immediate use Secure, standardised interface for precise tool retention The HSK-A63 holder implements a widely accepted spindle interface that supports consistent seating and repeatability when combined with a compatible fixture. By using a standardised connection, the holder reduces alignment variation during assembly changes and simplifies tool inventory management. This results in fewer changeover errors and predictable positioning, which benefits production lines where consistent tool location is essential for downstream accuracy. Seamless integration to cut setup time in mounting arrangements Designed for installation with the specified mounting system (Art.-No. 2000832115), the adapter enables direct interface mating without additional adapters or complex modifications. The compatibility with the TECWERK mounting arrangement supports faster changeovers and a simplified mechanical stack-up, leading to measurable time savings during maintenance and tool replacement. The practical outcome is improved machine uptime and less non-productive time at the workstation. Clear procurement and minimal logistics disruption Supplied as a single packaging unit, the holder fits straightforward procurement and stocking strategies. Metav’s role as distributor provides a reliable supply channel and an experienced quality filter for the European market; this helps ensure the component received matches the expected specification and is ready for immediate deployment. For production planners, that means fewer surprises on delivery and a direct route to the correct mounting interface. For reliable HSK-A63 mounting solutions from TECWERK, contact Metav Werkzeuge for product matching and ordering assistance via info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: 2000832118NW Article name: HSK-A63 holder for mounting system (TECWERK) Brand: TECWERK Product type: Holder for mounting system Compatible with: mounting system Art.-No. 2000832115 Packaging unit: 1 Core Data Packaging unit: 1 Compatible mounting system Art.-No.: 2000832115 Interface: HSK-A63 Special features Standardised HSK-A63 interface Integration for mounting system assemblies Brand: TECWERK FAQ What does the HSK-A63 holder fit? The HSK-A63 holder (TECWERK, SKU 2000832118NW) is intended for mating with HSK-A63 tool interfaces and integration into the referenced mounting system Art.-No. 2000832115. Is the holder compatible with standard HSK-A63 tooling? Compatibility is based on the HSK-A63 standard; the holder from TECWERK accommodates standard HSK-A63 toolholders when used in the correct mounting arrangement. How is the product supplied? The item is supplied as a single unit (packaging unit 1) under article number 2000832118NW. Can the holder be used with other mounting systems? The holder is designed for the TECWERK mounting system specified; use with other systems requires verification of mechanical fit and interface compatibility. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com