136mm HSK 63 Coolant Transfer Tube Key, Total Length 136mm - TECWERK
Robust engagement for HSK 63 connections and a 136 mm working length deliver reliable handling and improved service times; order supply or request advice directly through Metav Werkzeuge for fast fulfilment. Key HSK 63 for coolant transfer pipes, 136 mm — TECWERK Key HSK 63 for coolant transfer pipes is a precision service key designed to engage and secure coolant transfer pipes in HSK 63 tool holders, offering a compact 136 mm overall length suited to maintenance and workshop servicing. Compatible with HSK 63 tool holders Designed for coolant transfer pipes Overall length 136 mm for accessible reach Reduced downtime through precise engagement A correctly matched engagement tool minimises the risk of misalignment and wear when handling coolant lines in tool holders. The HSK 63 interface ensures a consistent contact geometry, which reduces slippage and the chance of damaging the transfer connection. By using a dedicated service key, maintenance operations become more predictable and repeatable, so machining cycles return to normal faster and costly interruptions are less frequent. This benefit is especially relevant in production environments that demand tight tolerances and steady coolant delivery. Better access and ergonomics for routine servicing With an overall length of 136 mm, the service key provides enough reach to work comfortably within the recesses of HSK tool holders while remaining compact for quick tool changes. The length balances accessibility and control, allowing technicians to manipulate coolant transfer pipes with minimal repositioning. Improved handling reduces task time and physical strain during repetitive servicing procedures, supporting efficient workshop workflows and safer operation around spindle areas. Seamless integration into maintenance workflows The tool is specified for the engagement of coolant transfer pipes and fits the HSK 63 standard, enabling straightforward incorporation into existing tool sets. Packaged as a single unit, it complements other HSK service items and helps standardise the maintenance kit for machines using this interface. Standardisation lowers training effort and streamlines spare-part management, contributing to a leaner inventory and fewer procurement steps across the workshop. For procurement teams requiring precise HSK 63 engagement and reliable handling of coolant transfer pipes, contact Metav Werkzeuge for supply and application advice — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832716NW Product type: Key Manufacturer: TECWERK SKU: 4000832716NW Facts Overall length: 136 mm Key size: HSK 63 Packaging unit: 1 Special features For coolant transfer pipes Suitable for HSK 63 tool holders Service key for maintenance applications FAQ Is the key compatible with standard HSK 63 tool holders? The key is specified for HSK 63 connections and is compatible with standard HSK 63 tool holders; reference SKU 4000832716NW for ordering. What is the working length and why does it matter? The overall length is 136 mm, which provides access into the tool-holder recess while keeping handling compact for routine servicing. Can this tool be used for coolant line replacement and adjustment? Yes, the service key is designed to engage coolant transfer pipes for secure handling during replacement or adjustment operations. How is the item supplied for inventory management? The tool is supplied as a single unit (packaging unit 1), making it easy to add to maintenance kits and spares lists. Who manufactures the key and where can further product details be found? The product is offered under the brand TECWERK; use article number 4000832716NW for precise identification and procurement. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
250mm ER Collet Wrench For ER 25 Collets, Hardened Zinc Plated With Hanging Hole - TECWERK
The combination of an ER 25 key size, hardened and zinc-plated special steel, and an integrated hanging hole ensures dependable clamping of ER/ESX collet nuts to DIN 6499 while simplifying storage and handling; order directly via Metav Werkzeuge or consult the technical team for specification checks. Collet Spanner ER 250 (ER 25) — TECWERK, hardened & zinc-plated The Collet Spanner ER 250 (ER 25) is a workshop tool designed for secure tightening of ER/ESX collet nuts in machining and toolroom applications, compliant with DIN 6499. Secure clamping of ER/ESX collet nuts Hardened, zinc-plated special steel construction Designed for ER 25 collet systems Built-in hanging hole for convenient storage Precision clamping that supports consistent machining results The span key is engineered for reliable torque application when securing ER/ESX collet nuts; its compatibility with DIN 6499 ensures correct fit and repeatable clamping performance across standard collet systems. Manufactured from special steel that is hardened for wear resistance and zinc-plated for corrosion protection, the tool reduces the risk of slippage and deformation during routine use. This results in fewer re-adjustments, less downtime and a more predictable machining process — a direct efficiency advantage in production and maintenance environments. Durable design for a long service life and low maintenance Constructed with longevity in mind, the spanner’s hardened core resists rounding and mechanical wear, while the zinc-plated finish provides an added layer of corrosion resistance in mixed workshop conditions. The robust material choice minimises the need for frequent replacement and helps contain operating costs over time. By selecting a tool that resists wear, the workshop benefits from consistent clamping accuracy and reduced spare-part turnover — practical advantages that support steady productivity. Ergonomic handling and organised storage for faster workflows The tool’s form factor supports quick engagement with ER 25 collet nuts, allowing for efficient operation during routine changeover and maintenance tasks. A practical hanging hole is incorporated for easy storage at the bench or on pegboards, keeping the tool accessible and reducing search time. Clear labelling of the key size and the simple, sturdy construction mean less guesswork during busy shifts, helping to streamline workflow and improve operator satisfaction. For specification queries, supply options or to request technical advice on the TECWERK collet spanner, contact Metav Werkzeuge in Emmerich by e-mail at info@metav-werkzeuge.com or by telephone on +49 2822 7131930 — assistance and fast delivery options are available from the Emmerich site. Technical data Article number: 4000832444NW Product name: Collet spanner ER 250 (ER 25) AMF Product type: Collet spanner Core data Key size: ER 25 Packaging unit: 1 Materials & special features Special steel, hardened and zinc-plated For secure clamping of ER/ESX collet nuts to DIN 6499 Integrated hanging hole FAQ Which collet systems are compatible with this spanner? The TECWERK collet spanner is intended for ER/ESX collet nuts and conforms to DIN 6499, ensuring compatibility with standard ER 25 systems. Is the tool protected against corrosion in workshop conditions? Yes, the spanner features a zinc-plated surface that provides corrosion resistance for general workshop environments. Can the spanner be used for heavy-handed tightening? The spanner’s hardened construction resists deformation under normal tightening loads; however, torque should follow the clamping recommendations for ER 25 collets to avoid overloading. How does the hanging hole benefit everyday use? The integrated hanging hole permits convenient storage on pegboards or racks, keeping the spanner readily accessible and reducing downtime spent searching for tools. Is this product supplied as a single unit or in sets? The item is supplied as a single unit; the packaging unit is listed as 1 (one). Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 11 Collet Wrench For ER/ESX Collet Nuts, Hardened Special Steel - TECWERK
Take advantage of secure clamping for ER/ESX collet nuts, the compact mini design and the hardened special steel construction for consistent toolholding and reduced setup times; order or consult with Metav Werkzeuge for procurement and technical advice. Collet Wrench ER Mini No.250K — Compact tool for ER 11 collet nuts (TECWERK) The Collet Wrench ER Mini No.250K is a compact, workshop-ready key designed for the secure tightening of ER/ESX collet nuts in machine tool and toolroom environments. Secure clamping for ER/ESX collet nuts Compatible with ER 11 size Hardened special steel construction Compact mini design for tight spaces Consistent toolholding for reliable production The compact key delivers secure clamping for ER/ESX collet nuts in accordance with DIN 6499, which supports repeatable and dependable toolholding. By ensuring the collet nut is correctly tightened, the wrench helps to reduce runout and vibration during machining, which directly contributes to longer cutter life and more consistent part quality. For production environments where process stability matters, correct clamping reduces rework and machine downtime, improving overall throughput and operational reliability. Robust design that resists wear and corrosion Manufactured from special steel and finished in a blued finish (tempered brown tone), this compact key offers mechanical strength with surface protection against everyday workshop corrosion. The tempering adds toughness to the steel while the blued finish provides a layer of oxidation resistance, making the tool suitable for regular use at the bench or on the machine. The durable construction supports frequent tightening cycles without rapid wear, so maintenance intervals are extended and replacement costs are reduced. Compact form to speed up setups in confined spaces The mini format is intended for accessibility where a full-size spanner would be impractical. The reduced profile improves reach into densely packed toolholders and spindle noses, enabling quicker changeovers and safer handling in tight assemblies. As a simple, purpose-built tool, it integrates seamlessly into existing setup routines and supports faster, more ergonomic clamping operations—helping workshop teams to maintain pace with production demands while keeping operations safe and repeatable. Contact Metav Werkzeuge for tailored advice on fitting and delivery of the TECWERK Collet Wrench ER Mini No.250K from our Emmerich quality hub Technical Data Article number: 4000605373NW Designation: Collet Wrench ER Mini No.250K Product type: Collet wrench Core data Size: ER 11 SKU / UID: 4000605373NW Special features For secure tightening of collet nuts of the ER/ESX system according to DIN 6499 Made from special steel Blued finish (tempered brown tone) Mini/compact design for restricted spaces FAQ Is this wrench suitable for ER 11 collets? Yes. The Collet Wrench ER Mini No.250K is specified for ER 11 collet nuts and is compatible with the ER/ESX system. What material and finish does the tool have? The TECWERK key is manufactured from special steel and supplied with a blued finish (tempered brown tone) for enhanced surface protection. Does the tool comply with a recognised standard? The design is intended for use with collet nuts produced to DIN 6499, ensuring compatibility with standard ER/ESX toolholding systems. Is the mini key suitable for tight machine environments? Yes. The compact format of the key is designed for tight spaces, making it useful at the bench and in crowded spindle areas where full-size wrenches are impractical. How does the wrench support production reliability? By enabling secure, repeatable clamping of collet nuts, the tool helps to reduce runout and vibration, contributing to consistent part quality and longer tool life. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 16 Collet Spanner For ER/ESX Nuts, Hardened Zinc-Plated With Hanging Hole - TECWERK
Take advantage of a tool that combines secure clamping for ER/ESX nuts, hardened special steel construction and space-saving handling thanks to the integrated hanging hole; order directly via Metav Werkzeuge or consult our specialists for application advice. Collet spanner ER No.250 Gr. ER 16 AMF – Collet spanner for ER/ESX clamping nuts, hardened and zinc-plated (TECWERK) The Collet spanner ER No.250 Gr. ER 16 AMF is a workshop tool designed to tighten and loosen ER/ESX clamping nuts in toolholding systems, compatible with DIN 6499 specifications Secure clamping for ER/ESX nuts Conforms to DIN 6499 standards Special steel, hardened and zinc-plated Integrated hanging hole for storage Consistent clamping that reduces setup time A compact wrench engineered for repeatable results, the spanner delivers consistent clamping of ER/ESX nuts which reduces setup variability and minimises rework. The tool’s construction from special steel, combined with heat treatment, provides a stable contact surface that resists deformation under torque; this ensures that the ER 16 interface retains its dimensional accuracy over repeated cycles. For workshops aiming to keep production steady, this mechanical reliability translates into fewer stoppages and predictable tool performance. Robust finishing for long service life Finished with a zinc-plated surface after hardening, the device offers corrosion resistance suitable for typical shop environments without the need for extra maintenance. The hardened surface protects critical engagement faces against wear, so the spanner maintains fit and function with clamping nuts over time. The inclusion of an integrated hanging hole facilitates tidy storage at the bench or in a tool board, helping to keep the working area organised and tools within easy reach during frequent tool changes. Designed for compatibility and straightforward handling Made specifically for ER/ESX clamping nuts to the DIN 6499 specification, the tool prioritises fit and ergonomics. The simple geometry of the key ensures intuitive insertion and removal from the nut while providing the leverage necessary for secure tightening. This straightforward usability reduces handling errors and shortens the time needed for clamping operations, supporting efficient workflows in metalworking and precision toolholding applications. For buyers seeking tried-and-tested practicality, the focus is on reliable mechanical function rather than complex features. Contact Metav Werkzeuge for stock availability and application guidance on TECWERK collet spanners; our Emmerich-based team will advise on compatibility and delivery options by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Technical data Article number: 4000832443NW SKU / UID: 4000832443NW Item designation: Collet spanner ER No.250 Gr. ER 16 AMF Facts Key size: ER 16 Packaging unit: 1 Special features For secure clamping of ER/ESX clamping nuts according to DIN 6499 Made from special steel Hardened and zinc-plated finish With hanging hole for easy storage FAQ What clamping systems is this spanner compatible with? The spanner is designed for ER/ESX clamping nuts and complies with the DIN 6499 specification; the Collet spanner ER No.250 Gr. ER 16 AMF fits the ER 16 size. Is the tool corrosion-resistant for workshop use? Yes, the hardened construction with a zinc-plated finish provides corrosion protection suitable for standard workshop environments. Can the spanner withstand repeated torque applications without deforming? The use of special steel and heat treatment gives the spanner high wear resistance, ensuring dimensional stability under repeated clamping cycles. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 32 Collet Wrench For ER/ESX Collet Nuts, Hardened Zinc Plated With Hanging Hole - TECWERK
Take advantage of the combination of secure clamping, durable hardened steel and practical storage to keep set-up times low and tool changeovers reliable; order the collet wrench directly via Metav Werkzeuge or ask our consultants if needed. Collet wrench ER No.250 (ER 32) — hardened, zinc-plated (TECWERK) A collet wrench ER No.250 (ER 32) for secure tightening of ER/ESX collet nuts to DIN 6499, designed for routine workshop and machine-tool use Secure clamping for ER/ESX collet nuts DIN 6499 Hardened special steel for long service life Zinc-plated surface for corrosion protection Integrated hanging hole for convenient storage Reliable clamping that stabilises machining results The design delivers secure clamping for ER/ESX collet nuts to the DIN 6499 standard, which reduces the risk of slippage during rotation and helps maintain concentricity. By ensuring a consistent interface between spindle and tooling, the wrench contributes to repeatable runout performance and longer tool life. For maintenance teams and production technicians, the tangible benefit is fewer re-runs and less time spent diagnosing toolholding issues, making set-ups more efficient and measurable. Built for endurance to cut maintenance and replacement cycles Made from hardened special steel and finished with a zinc-plated coating, the tool offers resistance to wear and surface corrosion that would otherwise shorten service intervals. The material choice supports sustained mechanical loads encountered in routine tightening; the result is a longer interval between replacements and a lower total cost of ownership for clamping accessories. In practical terms, this means less inventory churn and greater confidence in everyday workshop operations. Thoughtful details that speed up daily workflows Small features influence daily efficiency: the compact form factor suits tight tool cabinets and busy benches, while the integrated hanging hole allows immediate storage beside the machine for rapid access. The simple, robust design is compatible with standard ER 32 fittings and supports quick tool changes during production runs. For workshop supervisors and setup engineers, the benefit is clear — reduced downtime and a tidier, more repeatable working environment that supports steady throughput. Contact Metav Werkzeuge for tailored advice and reliable supply of the ER 32 collet wrench; call +49 2822 7131930 or e‑mail info@metav-werkzeuge.com Technical data Article number: 4000832445NW Product name: Collet wrench ER No.250 (ER 32) Brand: TECWERK Facts Key size: ER 32 Packaging unit: 1 Special features For secure tightening of ER / ESX collet nuts to DIN 6499 Made from special steel Hardened and zinc-plated surface With hanging hole for storage FAQ Is this wrench compatible with all ER 32 collet systems? The collet wrench ER No.250 is specified for ER 32 collet nuts and designed to work with ER/ESX systems manufactured to DIN 6499 What material and finish does the tool have? The tool is made from hardened special steel and is zinc-plated to provide wear resistance and basic corrosion protection Will the wrench help reduce tool-holding issues such as slippage? By delivering consistent, standard-compliant tightening, the wrench improves secure clamping and helps reduce slippage and runout-related problems Can the wrench be kept near the machine for quick access? Yes — the integrated hanging hole allows practical storage at the bench or beside the spindle for faster tool changes What is the article number for ordering or inventory? The article number is 4000832445NW and the item is listed as a collet wrench ER No.250 (ER 32) by TECWERK Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
ER 40 Collet Wrench For ER/ESX Nuts Hardened Zinc Plated With Hanging Hole - TECWERK
Take advantage of the combination of precise clamping, robust construction and practical workshop handling for reliable production processes; order directly via Metav Werkzeuge or consult our specialists for tailored advice. Collet spanner ER No.250, size ER 40 – hardened, zinc-plated (TECWERK) The Collet spanner ER No.250 (ER 40) is a workshop tool for secure tightening of ER / ESX collet nuts to DIN 6499, designed for routine machining and maintenance tasks. Secure clamping for ER / ESX collet nuts Hardened special steel for long service life Zinc-plated finish and hanging hole for storage Precision clamping that protects toolholders and workpieces The wrench is engineered for secure clamping of ER 40 collet nuts in conformity with DIN 6499, which ensures consistent axial force transmission and repeatable holding performance. Where a collet nut joins the toolholder to the tool shank, correct tightening prevents slippage and run-out; the spanner's geometry is matched to this function. As a workshop implement, it supports process stability by reducing rework and machine downtime through reliable torque transfer during assembly and maintenance. Robust materials for daily workshop demands Manufactured from special steel that is hardened and zinc-plated, the key offers high wear resistance and basic corrosion protection suited to busy shop floors. Hardening increases resistance to deformation under load, while the zinc-plated surface reduces the risk of surface corrosion in humid environments. The resulting combination prolongs service life and keeps calibration intervals and unexpected tool replacement to a minimum, contributing to predictable operating costs and uninterrupted production rhythms. Practical design to speed up everyday handling The compact form and integrated hanging hole enable tidy storage close to machining stations, reducing search times and improving workflow ergonomics. Supplied as a single unit, the tool is ready for immediate use and simple to integrate into a set of hand tools or a tool trolley. Clear, maintenance-friendly surfaces mean occasional cleaning is sufficient to maintain functionality, which supports fast tool changes and a more efficient workshop routine. For procurement or technical advice on the TECWERK Collet spanner ER No.250, contact Metav Werkzeuge in Emmerich for personalised guidance and prompt supply via info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: 4000832446NW Product: Collet spanner ER No.250 Brand: TECWERK Packing unit: 1 Facts Size: ER 40 Special features Secure clamping of ER / ESX collet nuts to DIN 6499 Made from hardened special steel Zinc-plated finish Hanging hole for workshop storage FAQ Is the spanner suitable for ER 40 collet nuts? Yes. The TECWERK Collet spanner ER No.250 is specifically sized for ER 40 and made for tightening ER / ESX collet nuts to DIN 6499 (Article number 4000832446NW). What is the tool made from and how durable is it? The spanner is manufactured from special steel, hardened for wear resistance and zinc-plated to provide basic corrosion protection, giving a durable service life in workshop conditions. How should the spanner be stored between uses? Use the integrated hanging hole to store the spanner on a pegboard or tool rail in a dry place; regular cleaning after use keeps the zinc-plated surface in good condition. Can this tool withstand frequent industrial use? The combination of hardened material and robust finish makes the spanner suitable for regular workshop and light industrial environments where reliable clamping of collet nuts is required. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com