180mm Milling Arbour Key DIN 6368 For Arbour Ø16mm, Hardened Steel - TECWERK
The combination of DIN 6368 conformity, a hardened special steel construction and a 180 mm overall length ensures secure tightening of cutter clamping screws and reliable leverage in workshop use; order the tool directly via Metav Werkzeuge or consult the advisers for application-specific guidance. Milling Arbor Key DIN 6368 – 16 mm Arbor, 180 mm (TECWERK) The Milling Arbor Key DIN 6368 is a hardened workshop tool designed for tightening and loosening cutter clamping screws on 16 mm arbors in milling setups. DIN 6368 compliant tool Suitable for 16 mm arbor 180 mm overall length for leverage Hardened special steel, blued finish Consistent clamping force for repeatable machining quality The tool is engineered to deliver a predictable torque transfer when working with cutter clamping screws, supporting consistent tool retention and repeatable results. Conformity with DIN 6368 provides a verifiable standard for dimensions and fit, while the specification for use with a 16 mm arbor reduces uncertainty during tool selection. This focus on measurable compatibility minimises set-up time and supports a smoother production flow, particularly in frequent-change operations where reliability of clamping is essential. Robust construction to withstand routine workshop stress Manufactured from hardened special steel and supplied with a blued finish, the key resists wear and presents a corrosion-resistant surface treatment suitable for a busy workshop environment. The material choice and heat treatment ensure edge and profile stability at the contact points, which preserves fit and function over prolonged use. The blued surface aids in visual inspection of wear and reduces the need for early replacement, contributing to lower lifetime costs and dependable service intervals. Practical length and ergonomics to improve handling efficiency With a total length of 180 mm, the wrench provides additional leverage for secure engagement with cutter clamping screws while remaining compact enough for work at the machine. The geometry supports controlled torque application without excessive force, reducing the likelihood of over-tightening. Designed primarily for tightening and loosening, the tool complements standard milling setups and helps maintain cycle times by enabling quick, dependable adjustments at the spindle or arbor. Discuss the suitability of this TECWERK milling arbor key with Metav Werkzeuge to confirm fitment for existing setups and arrange delivery from Emmerich. Technical data Article number: 4000832438NW Norm: DIN 6368 Product type: Milling arbor key Suitable for: Dorn-Ø 16 mm Facts Overall length: 180 mm Packaging unit: 1 Special features For tightening and loosening cutter clamping screws Designed for use with equipment to DIN 6367 Special steel, hardened and blued finish FAQ What arbor diameter does the key fit? The key is designed for a 16 mm arbor and is specified accordingly in the product data for precise compatibility. Is the tool compliant with a recognised standard? Yes, the tool is produced to DIN 6368, ensuring dimensional conformity and interchangeability in standard milling applications. What material and finish are used for durability? The milling arbor key is made from hardened special steel with a blued finish, providing wear resistance and basic corrosion protection suitable for workshop use. Can this key be used to both loosen and tighten clamping screws? The tool is intended for both tightening and loosening of cutter clamping screws and is dimensioned to work reliably at the specified 16 mm arbor interface. Which SKU identifies this product for ordering? Refer to SKU 4000832438NW when ordering the TECWERK milling arbor key or when requesting technical clarification. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
200mm Milling Arbor Key DIN 6368 For Arbor Ø22mm, Hardened Special Steel - TECWERK
Combining DIN 6368 conformity with a hardened special steel construction and a 200 mm overall length, this tool delivers reliable access and secure torque for arbor Ø 22 mm applications; ideal for tightening and loosening milling arbor draw-in screws. Order the milling arbor key directly via Metav Werkzeuge or ask our consultants if needed. Milling arbor key DIN 6368 — TECWERK, arbor Ø 22 mm, 200 mm length A milling arbor key DIN 6368 designed for tightening and loosening milling arbor draw-in screws, suited to use with an arbor Ø 22 mm in workshop and production environments. DIN 6368 standard conformity For arbor Ø 22 mm Hardened special steel, tempered finish 200 mm total length for added leverage Precision that matches industry standards The tool is manufactured to DIN 6368, which ensures a precise fit to the clamping interfaces encountered in milling setups. Conformity with this standard reduces the risk of incorrect engagement and slippage, translating into shorter setup times and fewer tool changes. By focussing on measurable compatibility, the design supports repeatable results when working with draw-in screw systems specified to the same norm. Robust construction for consistent torque transfer Constructed from special steel, the key is hardened and tempered to a brown finish, offering a balance of toughness and wear resistance. The treated surface helps the tool withstand repeated use in a busy workshop without rapid loss of function. With a 200 mm overall length the tool provides practical leverage for controlled tightening and loosening of clamping screws while remaining compact enough for confined spindle housings. Designed to simplify workshop routines The geometry of the arbor wrench is optimised for access to milling arbor draw-in screws and related fastening hardware. This focused design reduces handling time and supports efficient machine changeovers, which is important for batch production and maintenance cycles. If compatibility with specific draw-in systems is a concern, technical details in the product data help to confirm fit before purchase. Applications and suitability Intended for use with an arbor of Ø 22 mm, the key is a specialist workshop instrument for milling toolholders and arbors where secure seating of cutters is required. The tool is appropriate for general workshop and industrial environments where standardised clamping elements are in use and where a durable, standard-compliant wrench improves repeatability and safety. For precision work with TECWERK components, request further technical details or secure supply through Metav Werkzeuge — contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for fast delivery from Emmerich. Technical data Article number: 4000832439NW SKU: 4000832439NW Product type: Milling arbor key Manufacturer: TECWERK Norm: DIN 6368 Total length: 200 mm Suitable for arbor Ø 22 mm Packaging unit: 1 For tightening and loosening milling arbor draw-in screws Conforms to DIN 6367 where relevant for screw interface Special steel, hardened and tempered to a brown finish FAQ What arbor size is this key suitable for? This milling arbor key is designed for an arbor Ø 22 mm and engages draw-in screw systems specified for that arbor diameter. Which standard does the tool conform to? The tool conforms to DIN 6368, ensuring dimensional compatibility with components and clamping screws produced to the same standard. What is the overall length of the tool? The overall length is 200 mm, providing practical leverage for tightening and loosening clamping screws in workshop and production settings. What material and finish does the key have? The key is made from special steel, hardened and tempered to a brown finish to improve wear resistance and longevity under regular use. Can the key be used with other arbor systems? Compatibility depends on the clamping interface; the key is optimised for systems aligning with DIN 6368 and an arbor Ø 22 mm—verify dimensional match before use. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
225mm Milling Arbor Wrench DIN 6368 For 27mm Arbor, Hardened Special Steel - TECWERK
Take advantage of a robust, standards‑compliant tool that combines DIN 6368 conformity with a hardened, blued finish and a practical 225 mm length for dependable tightening and loosening of milling arbor drawbar screws; order or request advice via Metav Werkzeuge for seamless workshop integration. Milling arbor wrench DIN 6368 — for arbor Ø 27 mm (TECWERK) The milling arbor wrench DIN 6368 designed for tightening and loosening milling arbor drawbar screws, suitable for arbors with a 27 mm diameter and workshop use Conforms to DIN 6368 Suitable for arbor Ø 27 mm Hardened special steel, blued finish 225 mm overall length Secure clamping through standardised design A tool engineered to meet DIN 6368 ensures consistent, reproducible results when securing milling cutters. The standardised geometry reduces the risk of incorrect engagement with drawbar screws and supports reliable torque application. By using a wrench that matches recognised norms, machine changeovers become more predictable and process control improves, which in turn reduces rework and downtime. The clear alignment to standards delivers a measurable increase in operational consistency for production environments. Durable construction for everyday workshop use Crafted from special steel, the tool is hardened and finished in a blued tone to provide corrosion resistance and wear protection during repeated use. This robust treatment extends service life in harsh conditions and supports long intervals between replacements, making the wrench a cost‑effective choice for maintenance teams. The solid construction contributes to dependable mechanical behaviour when tensioning and loosening fastenings, reducing the likelihood of deformation under load. Straightforward compatibility with common arbor sizes Designed specifically for arbors of 27 mm diameter, the wrench matches the seating and engagement requirements of typical milling drawbar screws produced to DIN 6367 dimensions. The defined fit minimises stripping and slippage, which helps preserve both the tool and the arbor interface. Clear specification reduces the time spent verifying suitability: technicians can identify compatibility from the marked diameter and the referenced standard, simplifying tool allocation in mixed‑equipment workshops. Ergonomic handling and practical dimensions With an overall length of 225 mm, the tool balances reach and control for both bench and machine‑mounted operations. The length offers sufficient leverage for efficient torque application without compromising manoeuvrability in confined setups. The compact but solid profile supports fast, repeatable interventions during cutter changes, contributing to smoother workflow in milling operations. The familiar form factor integrates easily into existing tool trolleys and maintenance kits, supporting rapid access when needed. For reliable tightening and loosening of milling arbor drawbar screws, request the TECWERK milling arbor wrench via Metav Werkzeuge — contact our advisors at info@metav-werkzeuge.com or call +49 2822 7131930 for precise application guidance and supply from Emmerich. Technical data Article number: 4000832447NW Type: Milling arbor wrench Standard: DIN 6368 Core specifications Overall length: 225 mm Suitable for arbor diameter: 27 mm Application: tightening and loosening milling arbor drawbar screws Materials / Special features Special steel, hardened and blued finish Conforms to DIN 6367 dimensions where applicable Pack unit: 1 FAQ What is the intended use of the wrench? The wrench is intended for tightening and loosening milling arbor drawbar screws and is specified for this application in the product documentation. Which arbor diameter does the tool fit? The tool fits arbors with a 27 mm diameter; compatibility is stamped and listed to ensure correct selection. Is the wrench suitable for continuous industrial use? The hardened special steel construction and blued finish make the wrench suitable for regular workshop use and repeated tool changes. Does the tool comply with recognised standards? Yes, the wrench is manufactured to DIN 6368 and intended to be used in conjunction with drawbar screws produced to DIN 6367. What is the overall length and why does it matter? The overall length is 225 mm, which provides a balance of leverage and accessibility for typical milling setups. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
250mm Arbor Wrench For Collet Ø32mm, DIN 6368 Hardened Steel - TECWERK
Take advantage of the DIN 6368 conformity, the fit for a 32 mm arbor and the 250 mm length to ensure secure tightening and safe access to cutter clamping screws; order the item directly via Metav Werkzeuge or ask the consultants for further specification support. TECWERK milling arbor key DIN 6368 – for 32 mm arbor, 250 mm length The milling arbor key DIN 6368 is designed for tightening and loosening milling cutter clamping screws on 32 mm arbors, ensuring compliant and repeatable clamping in production and workshop environments. DIN 6368 standardised design For arbors with 32 mm diameter 250 mm overall length for good reach Special hardened steel with blued finish Precision fit reduces setup time and rejects The tool delivers a DIN 6368 conforming interface that matches industry-standard arbors and clamping screws, which reduces calibration and setup variance. Because the key is matched to a 32 mm arbor diameter, spindle interfaces seat consistently, lowering the risk of incorrect torque application and minimising costly rework. The standardised design supports leaner changeover routines and contributes directly to steady production flow. Robust construction for long service life Manufactured from special hardened steel and finished to a blued tone, the implement resists wear and surface corrosion under workshop conditions. The heat-treated core increases resistance to edge deformation during repeated use, so tool life is extended and replacement intervals are reduced. This durability translates into lower downtime and a more predictable maintenance cadence for machining operations. Designed for safe access and confident handling The 250 mm overall length provides additional reach for cutters recessed in adapters or tight set-ups, while preserving manual control during torque application. The geometry focuses force transfer to the clamping interface, making the action of tightening and loosening the clamping screws efficient without overstressing adjacent components. In practice, this improves operator comfort and reduces the chance of slippage that could damage tooling. Standards compliance and clear application scope Tool function is specified for use with cutter clamping screws in accordance with DIN 6367, ensuring compatibility with common arbor assemblies. Marked conformity gives procurement and quality teams an objective reference when specifying tools for machining stations, enabling straightforward integration into existing tool inventories and maintenance procedures. The compact specification supports both production lines and specialist workshops requiring reliable, standards-based equipment. For reliable DIN 6368 conformity and efficient arbor servicing, contact Metav Werkzeuge GmbH in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for procurement and technical guidance on the TECWERK milling arbor key (SKU 4000832441NW). Technical data Article number: 4000832441NW Product type: Milling arbor key Manufacturer: TECWERK Standard: DIN 6368 Packaging unit: 1 Core measurements Overall length: 250 mm Suitable for arbor diameter: 32 mm Special features For tightening and loosening cutter clamping screws (DIN 6367) Special steel, hardened and blued finish Conforms to DIN 6368 FAQ What arbor diameter is this key intended for? The TECWERK milling arbor key is intended for arbors with a 32 mm diameter and is specified accordingly in the product documentation. Does the tool meet an industry standard? Yes, the key is manufactured to DIN 6368 and is suitable for use with clamping screws specified under DIN 6367. What is the total length and why does it matter? The overall length is 250 mm, which gives improved reach into recessed assemblies while maintaining control during tightening and loosening. What material and finish are used for durability? The key is made from special hardened steel and is tempered to a blued finish to enhance wear resistance and surface protection. Can this key be used for other arbor sizes? The tool is dimensioned for a 32 mm arbor; use on non‑specified diameters is not recommended as it may compromise clamping security and compliance. Manufacturer / Responsible: NORDWEST Handel AG, Robert‑Schuman‑Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com