120mm Machine Foot Size 2 Zinc-Plated, M16 x 1.5 x 120 Thread - TECWERK
Take advantage of a zinc-plated levelling mount with a M16 x 1.5 x 120 mm threaded stud and a Ø 120 mm support plate for secure, vibration-isolating support; suitable for lathes, milling machines and saws. Order the part directly via Metav Werkzeuge or consult the advisors for sizing and supply. ALBRECHT machine foot Size 2 – zinc-plated levelling mount, M16 thread (TECWERK) The ALBRECHT machine foot Size 2 is a zinc-plated levelling mount designed to provide stable support and vibration isolation for heavy workshop machinery such as lathes and milling equipment Zinc-plated for corrosion protection Threaded stud M16 x 1.5 x 120 mm Ø 120 mm base with 18 mm levelling travel Max static load 400–1000 kg per foot Secure levelling and dual vibration isolation The zinc-plated mount provides a dependable support platform, combining a M16 x 1.5 x 120 mm threaded stud with a Ø 120 mm base to distribute loads evenly across the shop floor. The specification lists a max static load of 400–1000 kg per foot and an overall installed height of 49 mm, delivering the mechanical stability required for precision operations. By isolating vibrations from the machine to the environment and shielding precision machines from external disturbances, this levelling mount helps preserve component tolerances and maintain consistent machining results. Correct sizing and straightforward installation for reliable operation Determining the right mount is a simple, rational process: establish the total machine mass, divide by the number of fixing points and compare the result with the foot’s rated load. The unit’s 18 mm levelling travel allows for fine adjustment on uneven floors, while the threaded stud simplifies secure attachment to machine bases. Proper selection and installation reduce wear on bearings and guides, lower the risk of misalignment and support uninterrupted production by preventing micro-movements and tilt during machining cycles. Durable finish and workshop-ready versatility A corrosion-resistant finish and a broad bearing surface make this levelling mount suitable for heavy-duty workshop environments where coolant, dust and humidity are present. The Ø 120 mm support plate resists indentation and spreads load over a larger area, reducing point loading on shop floors. Maintenance is minimal: scheduled inspections of the levelling plate and thread ensure ongoing performance, while the robust design contributes to long service life and dependable machine placement in both general engineering and precision workshops. For reliable levelling and effective vibration control, choose the TECWERK ALBRECHT machine foot Size 2 and contact Metav Werkzeuge for expert advice and dependable supply from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: 4000832073NW Label: Maschinenschuh Gr. 2 ALBRECHT Product type: Maschinenschuh Manufacturer: TECWERK Packaging unit: 1 Facts Ø D: 120 mm Height incl. levelling plate H: 49 mm Levelling travel N: 18 mm Threaded stud G: M16 x 1.5 x 120 mm Max static load per foot: 400–1000 kg Special features Zinc-plated finish Suitable for lathes, milling machines, saws and other machines Dual vibration isolation (machine-to-environment and external-to-machine) Simple sizing via weight divided by number of fixing points FAQ What static load can each mount support? The ALBRECHT machine foot Size 2 is rated for a max static load of 400–1000 kg per foot; the allowable load per mounting depends on the machine’s total weight and the number of fixing points. How much levelling adjustment is available? This levelling mount offers 18 mm of levelling travel and an installed height of 49 mm, allowing for fine height correction on uneven floors. Is the finish suitable for humid or coolant-prone environments? The zinc-plated finish on the ALBRECHT mount provides increased resistance to corrosion, making it appropriate for workshop conditions with occasional coolant exposure or higher humidity. Which machine types are appropriate for this levelling mount? The levelling mount is suitable for heavy workshop equipment such as lathes, milling machines and saws, where stable positioning and vibration isolation improve process stability. TECWERK: Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
160mm Machine Foot Size 3 Zinc Plated M20 x 1.5 x 170, 59mm Height - TECWERK
Robust galvanised levelling support with a Ø 160 mm base and an M20 x 1.5 x 170 mm threaded bolt for secure machine placement; suitable for static loads from 800–2,500 kg and designed to isolate vibrations both from the machine and from outside sources. Order the Maschinenschuh Size 3 ALBRECHT directly via Metav Werkzeuge or consult our specialists for application guidance. Maschinenschuh Size 3 ALBRECHT — galvanised levelling foot, Ø 160 mm, M20 thread (TECWERK) The Maschinenschuh Size 3 ALBRECHT is a galvanised levelling foot engineered to give lathes, milling machines, saws and similar equipment a secure, vibration-isolating base suitable for heavy industrial use Galvanised finish for corrosion resistance Ø 160 mm base for stable support M20 x 1.5 x 170 mm threaded bolt Rated for 800–2,500 kg static load Stable support for heavy machinery and safer workflows A levelling foot with a Ø 160 mm base and a robust threaded stud provides a wide contact area that improves load distribution and reduces surface pressure. The M20 x 1.5 x 170 mm bolt enables precise height adjustment while the built-in levelling plate maintains stability under heavy loads. For workshops that demand repeatable positioning and a reliable foundation, this design reduces the risk of uneven settling and contributes to safer, more consistent machining outcomes. Effective vibration isolation for improved accuracy By isolating vibrations both from the machine to its surroundings and from external sources into the machine, this mount aids in preserving the accuracy of precision equipment. The combination of the wide base and a levelling compensation of 25 mm dampens transmission of oscillations so that spindles and tools remain steadier during operation. The result is fewer rejects, reduced tool wear and a quieter working environment — advantages that translate into measurable gains in production quality and operator comfort. Choosing the right levelling foot for an application Selection is based on the machine’s total weight and the number of fixing points: divide the machine weight by the number of mounting holes to determine the required capacity per foot. The Size 3 model covers a max static load per foot of 800–2,500 kg, which suits many medium‑ to heavy‑duty machines. Where uncertain, refer to the machine’s specification plate and compare the calculated load per fixing point against the rated capacity of the mount to ensure a safe margin of use. Durable finish and straightforward installation The galvanised finish provides long-term corrosion resistance for workshop environments, while the threaded stud and levelling plate simplify installation on machine bases or frames. Fixing requires standard fastening practices and basic tools; final levelling is achieved via the stud adjustment. The construction supports reliable operation over time with minimal maintenance, which helps to keep machine downtime and service interventions to a minimum. For product availability, application advice or to place an order for the TECWERK levelling foot, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for expert guidance and quick supply. Technical Data Article number: 4000832074NW Product: Maschinenschuh Size 3 ALBRECHT Manufacturer: TECWERK Facts Height including levelling plate H: 59 mm Base diameter Ø D: 160 mm Threaded bolt G: M20 x 1.5 x 170 mm Levelling compensation N: 25 mm Max static load per foot: 800–2,500 kg Special features Galvanised finish Suitable for lathes, milling machines, saws and similar machinery Reduces vibration transmission in both directions Packaging unit: 1 FAQ What static load can a single levelling foot carry? A single Maschinenschuh Size 3 ALBRECHT is rated for a max static load of 800–2,500 kg, depending on installation and safety factors; calculate the load per fixing point to confirm suitability. Is the levelling foot suitable for precision machines? Yes. The galvanised levelling foot is designed to isolate vibrations and provide a stable base, helping to preserve the accuracy of precision equipment when used correctly. How much vertical adjustment is available? The levelling arrangement provides 25 mm of levelling compensation, with a total height including the levelling plate of 59 mm, enabling fine height adjustments during set-up. Which machines are compatible with this mount? The mount is appropriate for lathes, milling machines, saws and other industrial machines where a secure, vibration-isolating support is required. What does the threaded specification M20 x 1.5 x 170 mm mean for installation? The designation indicates an M20 metric thread with a 1.5 mm pitch and a 170 mm stud length; this determines the fixing method and the depth required for secure mounting of the foot. Manufacturer/Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
80mm Machine Mounting Foot M12 x 1.25 x 120, Zinc-Plated, 41mm Height - TECWERK
Benefit from a secure machine stand and effective vibration isolation with the zinc-plated machine foot Size 1 ALBRECHT; its M12 x 1.25 x 120 mm threaded stud and 41 mm overall height ensure straightforward levelling and reliable load support — order via Metav Werkzeuge or consult our specialists for precise selection. Machine foot Size 1 ALBRECHT (TECWERK) – Zinc-plated, Ø 80 mm A robust machine foot, Machine foot Size 1 ALBRECHT, designed to stabilise lathes, milling machines and saws while providing two-way vibration isolation and precise levelling. Zinc-plated finish for corrosion resistance Suitable for lathes, milling machines and saws Max static load 50–500 kg per foot Height incl. levelling plate 41 mm Secure support with measurable performance The machine foot delivers a stable base by combining a large contact diameter with a threaded stud for secure fastening. The Ø 80 mm base distributes forces and reduces point loads, while the M12 x 1.25 x 120 mm stud provides a standardised connection for most machine frames. For reliable selection, establish the machine weight and divide by the number of mounting points to determine the max static load required per foot; the range offered here is 50–500 kg, which covers many bench and shop-floor applications. This calculation ensures a rational, data-led decision and avoids underspecification. Precise levelling and quick adjustment on site Levelling is achieved through the integrated adjustment range: height incl. levelling plate 41 mm and a levelling adjustment of 18 mm. The adjustment thread is designed for secure setting and repeatable alignment, so precision equipment remains level even under dynamic conditions. Installation is completed by fastening the stud and adjusting the foot until the machine sits correctly; once set, the levelling plate locks the position. The straightforward mechanical design minimises maintenance and supports continuous production with predictable machine alignment. Durable finish and broad machine compatibility The zinc-plated surface protects the mount against corrosion in industrial environments and prolongs service life where exposure to humidity or light contaminants occurs. Designed for use with lathes, milling machines and saws, the mount isolates vibrations both from the machine to the surroundings and from external sources to the machine, improving measurement stability and machining accuracy. Where sensitivity to vibration is critical, this levelling foot offers a practical compromise between load capacity and damping, ensuring machines retain their positional accuracy over time. Contact Metav Werkzeuge in Emmerich for expert advice and availability — email info@metav-werkzeuge.com or call +49 2822 7131930 to confirm suitability and order the TECWERK machine foot with SKU 4000832072NW Technical data Article number: 4000832072NW Product: Machine foot Size 1 ALBRECHT Brand: TECWERK Packaging unit: 1 Key dimensions & loads Height incl. levelling plate H: 41 mm Levelling adjustment N: 18 mm Base diameter Ø D: 80 mm Threaded stud G: M12 x 1.25 x 120 mm Max static load per foot: 50–500 kg Materials & compatibility Zinc-plated finish Suitable for lathes, milling machines, saws and similar machinery Provides two-way vibration isolation Gives machines a secure stand and repeatable levelling FAQ What load can a single machine foot support? The Machine foot Size 1 ALBRECHT (TECWERK, SKU 4000832072NW) is rated for a max static load of 50–500 kg per foot, depending on application and mounting. How is the levelling adjustment performed? Levelling is achieved by rotating the threaded stud and setting the levelling plate within the 18 mm adjustment range; final position is secured mechanically to maintain alignment. Is the finish suitable for workshop environments? Yes, the zinc-plated surface resists corrosion and is suitable for typical workshop conditions, extending the service life of the mounting. Which machines are compatible with this mount? Designed for use with lathes, milling machines and saws, the mount gives a stable base and vibration isolation for precision and general-purpose machines. How to calculate the required load capacity per foot? Determine the total machine weight and divide by the number of mounting points to find the required static load per foot; then select a mount within the 50–500 kg range provided. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com