0,7x... 4,5x SLX-4 Binocular stereozoom microscope
0,7x... 4,5x SLX-4 Binocular stereozoom microscope
0,7x...4,5x SLX-2 Cordless binocular stereozoom
0,7x...4,5x SLX-2 Cordless binocular stereozoom
0,7x...4,5x SLX-3 Cordless trinocular stereozoom microscope
0,7x...4,5x SLX-3 Cordless trinocular stereozoom microscope
0,7x...4,5x SLX-5 Trinocular stereozoom microscope
0,7x...4,5x SLX-5 Trinocular stereozoom microscope
0.75x-5x Mono Video Zoom With Adjustable LED Illumination, Ø25x240 Stand - Metav IndustryLine
Take advantage of the combination of a wide 0.75x–5x zoom, an adjustable LED for both reflected and transmitted illumination and a compact, stable stand to speed up routine inspections and documentation. Order the Mono Video Zoom directly via Metav Werkzeuge or ask the consultants for application advice. Mono Video Zoom ZDH0850+SD18-D — mono video zoom head with adjustable LED, 0.75x–5x, Metav IndustryLine The Mono Video Zoom is a mono video zoom head supplied with a stable stand and a regulable LED illumination system for both reflected and transmitted light, designed for quality control, electronics inspection and microassembly documentation. Adjustable LED for reflected and transmitted light 0.75x–5x zoom range for versatile inspection Stable 292×283 mm base for repeatable positioning Integrated 3 W illumination for consistent brightness Precise visual inspection across a broad magnification range The video zoom head provides a 0.75x–5x zoom that covers tasks from coarse alignment to detailed inspection without frequent objective changes. This range reduces setup time and minimises handling of delicate components, enabling faster throughput in inspection stations. The optical design supports clear video documentation, so defects and features are captured reliably for traceability and reporting. The compact zoom head keeps the optical axis stable, which benefits repeatability in quality-control routines and in-line sample checks. Illumination that adapts to different sample types The built-in, adjustable LED lighting supports both reflected and transmitted light modes, offering flexible contrast control for plastics, foils, PCBs and thin specimens. The 3 W illumination delivers steady light output while keeping thermal influence low, which is important for temperature-sensitive materials. Fine-tuning the light intensity and direction improves defect visibility and reduces the need for external illumination rigs, simplifying workstations and saving bench space. Stable support for reproducible measurements and handling A thoughtfully dimensioned support system ensures practical stability: the 292×283 mm base combined with a Ø25×240 mm column provides a robust foundation that keeps the optical head rigid during adjustments. This mechanical stability is crucial when performing routine inspections or capturing sequence images, as it reduces motion artefacts and the need for repeated focusing. The overall footprint balances rigidity with a small bench presence, making the unit suitable for compact production lines and laboratory benches. Designed for smooth workflow and reliable documentation Integration with video capture and inspection setups is straightforward thanks to the mono video head's form factor and mounting compatibility. The head is particularly suitable where visual logging and repeatable checks are required, such as incoming inspection, final assembly checks and microfabrication quality control. Backed by Metav’s focus on making precision accessible, the system supports dependable daily use in industrial and craft workshops, helping to standardise inspection routines and improve process transparency. For tailored advice or to arrange procurement through Metav Werkzeuge, please contact the Metav consultants who can recommend the ideal configuration for specific inspection tasks. Technical data Article number: M503.221.1 GTIN: 4054469145006 Model / Type: ZDH0850+SD18-D Brand: Metav IndustryLine Facts Magnification: 0.75x–5x Illumination power: 3 W Base footprint: 292×283 mm Column: Ø25×240 mm Special features Mono video zoom head Stand included Regulable LED for reflected and transmitted light Category: Optics Image asset available (product photo) FAQ What magnification range does the head cover? The Mono Video Zoom offers a 0.75x–5x zoom range, suitable for both coarse alignment and detailed inspection tasks. Is the illumination suitable for transparent samples? Yes. The integrated, regulable LED supports transmitted light, making the system suitable for thin or semi-transparent specimens as well as reflected-light inspection. What is the footprint required for the unit on a workbench? The stand requires a 292×283 mm footprint and uses a Ø25×240 mm column, providing a stable base for routine inspection and image capture. Which applications is this video zoom head designed for? Typical uses include electronics inspection, quality control, microassembly checks and documentation tasks where repeatable visual records are needed. Does the package include a stand and illumination? Yes, the delivery includes the stand and the integrated regulable LED illumination for reflected and transmitted lighting. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.75x-5x Mono Video Zoom With Infinity-Corrected Optics And High Resolution, 1:1 C-Mount Adapter - Metav IndustryLine
Benefit from an infinity-corrected optical system, high-resolution imaging and a wide 0.75x–5x zoom range for precise inspection and measurement tasks; these features improve image fidelity and reduce setup time. Order the Mono Video Zoom directly via Metav Werkzeuge or contact our consultants for tailored application advice. Mono Video Zoom — Video zoom lens with infinity-corrected optics and high-resolution imaging The Mono Video Zoom is a compact video zoom lens designed for visual inspection and measurement in electronics, semiconductor and LED production, delivering an infinity-corrected optical path and high-resolution images for reproducible results. Infinity-corrected optical system High-resolution imaging 0.75x–5x zoom range Designed for electronics inspection Precise visual inspection made reproducible The infinity-corrected design ensures that the optical path beyond the objective remains parallel, which simplifies integration with cameras and measuring systems and reduces image aberrations. With its infinity-corrected optical system and high-resolution performance, the lens produces stable, high-contrast images that enable more reliable defect detection and dimensional checks. For quality control, this translates into fewer false rejects and faster decision cycles, since images remain consistent across different camera set-ups and magnification steps. Practical advantages for process control and assembly inspection A wide 0.75x–5x zoom range provides flexible working distances and field-of-view adjustment without frequent lens changes, supporting tasks from coarse alignment to close-up inspection. This variability reduces handling time and increases throughput on inspection stations. The optical construction is optimised for clear edge definition, which helps metrology software and manual operators to obtain repeatable measurements, improving traceability in production environments such as semiconductor wafer inspection and LED module testing. Integration and application clarity for production environments Engineered for machine-vision and laboratory use, the lens is compatible with common imaging chains and adapts easily to different camera sensors. The robust optical correction and high-resolution output reduce the need for expensive lighting adjustments, making the solution practical for both small-scale labs and inline inspection systems. By combining precision optics with straightforward adaptability, the device supports consistent measurement workflows and reduces setup complexity for inspection engineers. Contact Metav Werkzeuge for application-specific advice or to request a quotation for the infinity-corrected Mono Video Zoom ZDH0850 from Metav IndustryLine Technical Data SKU: M503.221 Type: ZDH0850 Magnification: 0.75x–5x GTIN: 4054469144993 Tariff number: 90119090 Eclass: 32130102 Facts Magnification range: 0.75×–5× GTIN numeric: 4054469144993 Tariff code: 90119090 Special features Infinity-corrected optical system High-resolution imaging Suitable for observation, control and measurement in electronics, semiconductor technology, LCE and LED applications Category: Optik FAQ What applications is this lens suited for? The Mono Video Zoom from Metav IndustryLine is suited to inspection and measurement tasks in electronics assembly, semiconductor production, LCE and LED inspection where high-resolution imaging and repeatable results are required. Can the lens be used with different camera sensors? Yes. The lens’s infinity-corrected optical design allows straightforward integration with a variety of camera sensors and imaging chains, facilitating rapid adaptation between laboratory and inline inspection systems. How does the 0.75x–5x zoom range benefit production workflows? The wide zoom range in the Mono Video Zoom enables quick field-of-view and working-distance adjustments without changing optics, reducing handling time and increasing throughput on inspection stations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.7x-4.5x Mono Video Zoom With Stand And Adjustable LED Illumination - Metav IndustryLine
Take advantage of the combination of flexible magnification, integrated adjustable illumination and a stable benchtop stand for fast, reproducible visual inspection and documentation. Order the unit directly via Metav Werkzeuge or contact the consultants for specification advice. Mono Video Zoom ZDM0745+SD18-D — 0.7×–4.5× zoom, adjustable LED (Metav IndustryLine) The Mono Video Zoom is a compact video zoom head with an integrated stand and adjustable LED illumination for reflected and transmitted lighting, designed for bench‑top inspection and documentation tasks. 0.7×–4.5× zoom range for flexible magnification Integrated adjustable LED for top and bottom illumination Stable Ø25×240 column with 292×283 base footprint Compact video zoom for inspection and documentation Precise, adaptable magnification for detailed inspection The Mono Video Zoom offers a magnification range of 0.7×–4.5×, combining low‑power overview and mid‑range enlargement in a single optical head. This span permits rapid switching between general assessment and closer scrutiny without changing optics, which reduces handling time during quality checks. The optical arrangement preserves image stability across the zoom band, making side‑by‑side comparisons and defect identification more efficient. Such a flexible zoom range supports both coarse sorting and focused visual verification within one workflow. Uniform illumination and stable support for reproducible results An adjustable LED system supplies both reflected (top) and transmitted (bottom) illumination, enabling contrast control for different sample types and surface finishes. The lamp runs at 3 W, delivering bright, energy‑efficient light with minimal heat load at the work area. The optical head is mounted on a stable stand with a Ø25×240 mm column and a 292×283 mm base, which reduces vibration and promotes repeatable positioning. The resulting setup helps to maintain consistent imaging conditions for routine inspections and photographic documentation. Built for inspection, documentation and compact workspaces This compact video zoom head integrates cleanly into inspection benches and small production cells, saving bench space while retaining adequate working distance and operator comfort. The design targets straightforward visual checks and documentation tasks, allowing teams to streamline routine quality assurance without complex set‑ups. As part of the Metav IndustryLine, the unit is intended to accelerate inspection throughput and reduce uncertainty in visual assessments, supporting stable process results across production and maintenance operations. Contact Metav Werkzeuge for tailored advice on the ZDM0745+SD18‑D and to confirm compatibility with existing imaging systems; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data SKU: M503.220.1 GTIN: 4054469144986 Type: ZDM0745+SD18-D Name: Mono Video Zoom Category: Optik ECLASS: 32130102 TARIC: 90111090 Facts Magnification range: 0.7×–4.5× Power: 3 W Base footprint: 292×283 mm Column: Ø25×240 mm Special features Adjustable LED for reflected and transmitted illumination Compact video zoom head for inspection and documentation Stable benchtop stand included Footprint suitable for small workspaces FAQ What magnification range does the unit offer? The Mono Video Zoom covers a magnification range of 0.7×–4.5×, allowing both overview and closer inspection without changing objectives. Is the illumination suitable for both opaque and transparent samples? Yes, the adjustable LED provides reflected (top) and transmitted (bottom) illumination, making the unit suitable for a wide range of specimen types. How stable is the mounting for repetitive inspection tasks? The optical head is mounted on a Ø25×240 mm column with a 292×283 mm base, which delivers low vibration and secure positioning for repeatable inspections. Can the unit be used on a crowded bench or within a compact production cell? The compact video zoom head has a modest footprint and is designed to integrate into limited bench space while maintaining working distance for documentation work. What is the exact product type and SKU for ordering or referencing? The product is the ZDM0745+SD18‑D, SKU M503.220.1, sold under the Metav IndustryLine range. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
0.7x–4.5x Mono Video Zoom Entry Model, 1:1 C‑Mount Adapter - Metav IndustryLine
Take advantage of a compact optical design and a practical 0.7×–4.5× zoom range to achieve reliable inspection and fast setup in electronics and semiconductor environments; the lens offers cost‑effective performance as an entry‑level instrument. Order the Mono Video Zoom directly via Metav Werkzeuge or ask our consultants if needed. Mono Video Zoom — compact optical zoom for inspection, 0.7×–4.5× Mono Video Zoom is a compact zoom lens designed for observation, inspection and measurement tasks in electronics and semiconductor applications Entry-level mono zoom lens 0.7×–4.5× variable magnification Suited for electronics and semiconductor inspection Versatile magnification that speeds up inspection tasks The 0.7×–4.5× zoom span covers both overview and detail checks without swapping optics, enabling rapid framing of assemblies and components. With a balanced optical design the lens supports consistent image quality across the entire zoom range, which reduces setup iterations and shortens inspection cycles. This makes the instrument particularly useful for routine quality control where throughput and reproducibility matter. Fast setup and dependable handling in production An entry-level mechanical concept keeps operation straightforward and reliable: fewer adjustments mean quicker integration into camera rigs and inspection stands and lower risk of operator error. The restrained form factor and robust internal mechanisms contribute to image stability and repeatability during continuous use, improving measurement consistency in repetitive visual checks and test workflows. Tailored to electronics, semiconductors and LED workflows Engineered for observation, control and measurement in electrical engineering, semiconductor technology, LCE and LED inspection, the lens delivers practical optical coverage for typical industry tasks. The combination of compactness and optical performance provides a cost‑effective route to upgrade visual inspection capability, supporting documented checks and visual verification across production and laboratory environments. For technical suitability and to discuss integration options for your camera setup, contact Metav Werkzeuge — our consultants can advise on the best configuration for your inspection line and provide procurement support. Technical data Article number: M503.220 GTIN: 4054469144979 Model: ZDM0745 ECLASS: 32130102 Magnification: 0.7×–4.5× Tariff number: 90119090 Brand: Metav IndustryLine SKU: M503.220 Facts Zoom range expressed as continuous optical magnification Numeric identifier GTIN 4054469144979 Tariff code 90119090 Special features Entry-level model Suitable for observation, control and measurement in electrical engineering, semiconductor technology, LCE and LED applications Detail and technical drawings available among product assets FAQ What inspection tasks is the Mono Video Zoom best suited for? The Mono Video Zoom (Metav IndustryLine, SKU M503.220) is optimised for visual checks, component inspection and documentation tasks in electronics, semiconductor and LED workflows. Can this lens handle both overview and fine-detail imaging? Yes, the 0.7×–4.5× magnification range allows both coarse framing and closer inspection while maintaining consistent image rendition across the zoom span. Is the lens easy to integrate into existing camera systems? The compact, entry-level mechanical design simplifies mounting and alignment; integration into standard camera rigs for production inspection is straightforward when using appropriate adapters. Does the product include technical documentation? Technical drawings and detail images are provided among the product assets to support mechanical integration and optical specification checks for the Mono Video Zoom. Is this product suitable for laboratory and shop-floor use? Designed for practical inspection tasks, the lens supports routine QA and shop‑floor checks as well as bench‑top laboratory verification in electronics and semiconductor contexts. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
10 Stereo Zoom Mikroskop
- Stereokopf mit hochwertiger Optik • Okular Weitfeld 10x • Stativ mit Feineinstellung • Stromversorgung 230 V / 50 HzTechnische Daten- Vergrößerung: 10- Zoom: 1X - 4X- Arbeitsabstand: 80mm- Licht: 12 V, 10W
100 mm Stereo Microscope Trinocular 7–45x Zoom 0.7–4.5x 3W LED Top/Brightfield, 29.9–4.6 mm Field - Euromex
Take advantage of the 7–45x magnification, the trinocular 45° head and the dual 3 W LED illumination for precise inspection and straightforward documentation; the generous 100 mm working distance keeps fixtures accessible during measurement. Order the Euromex StereoBlue SB.1903-P directly via Metav Werkzeuge or ask the consultants for configuration advice. StereoBlue SB.1903-P stereomicroscope — 7–45x zoom, trinocular 45° head (Euromex) The StereoBlue SB.1903-P is a compact stereomicroscope designed for inspection, assembly and documentation tasks in laboratories and quality-control benches, combining flexible magnification with a dedicated photo port for imaging. 7–45x magnification range Trinocular 45° head for documentation Dual 3 W LED illumination 100 mm working distance Flexible magnification for focused inspection The 7–45x zoom range, driven by the Zoom 0.7–4.5x objective system, provides adaptable viewing from coarse overview to fine detail without changing lenses. With a sight field of 29.9–4.6 mm, the optical system enables quick switching between tasks such as component alignment and solder joint inspection while maintaining stereoscopic depth perception. This flexibility reduces handling time and streamlines visual quality checks in production and R&D environments. The incorporated WF 10x/21 mm eyepieces deliver a comfortable exit pupil and support clear, fatigue‑reduced observation during extended use. Ergonomic optics and reliable documentation The trinocular 45° head with both-sided dioptre adjustment ensures ergonomic viewing and reproducible focus across operators; the interpupillary range of 55–75 mm accommodates varied users while preserving optical alignment. The dedicated photo connection supports imaging for traceable records; note that a supplementary SLR photo adapter is required for certain camera mounts, so compatibility with the camera bayonet should be checked before purchase. These features make the instrument well suited for laboratories that need reliable visual documentation alongside inspection tasks. Consistent illumination and practical workspace Integrated 3 W LED reflected (incident) and 3 W LED transmitted illumination produce uniform, low‑heat lighting suitable for sensitive samples and fine detail work. The 100 mm working distance gives ample clearance for probes, tweezers or small fixtures, enabling hands‑on manipulation without losing focus or image quality. LEDs offer long life and stable colour temperature, which supports reproducible inspections and reduces downtime associated with bulb replacement. Ready-to-use configuration and workshop suitability Delivered with practical accessories — eyecups, dust cover, instruction manual, mains lead and spare fuse — the set arrives prepared for immediate integration at the workstation. The column stand configuration provides a stable platform and flexible height adjustment for varied specimen sizes. As part of the StereoBlue series, the microscope combines straightforward ergonomics with optical performance, making it appropriate for inspection, small‑part assembly and routine laboratory documentation. Contact Metav Werkzeuge for tailored advice on the Euromex StereoBlue SB.1903-P (SKU SB.1903-P) and to confirm camera‑adapter requirements — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: SB.1903-P SKU: SB.1903-P Brand: Euromex Model series: StereoBlue Product type: Stereomicroscope Facts Magnification: 7–45x Zoom lens: 0.7–4.5x Working distance: 100 mm Sight field: 29.9–4.6 mm Illumination: 3 W LED reflected; 3 W LED transmitted Eyepieces: WF 10x/21 mm Interpupillary distance: 55–75 mm Special features Head: Trinocular, 45° Dioptre adjustment: both sides Stand: Column stand Included accessories: eyecups; dust cover; manual; mains lead; spare fuse Photo documentation: additional SLR adapter required for certain camera bayonets (check compatibility) Series: Stereo-Zoom-Sets FAQ What magnification range is available with this stereomicroscope? The Euromex StereoBlue SB.1903-P offers a 7–45x magnification range via the Zoom 0.7–4.5x objective system (SKU SB.1903-P), suitable for both overview inspection and detailed examination. Is the photo port ready for direct camera mounting? The StereoBlue SB.1903-P includes a trinocular head with a photo port, but certain cameras require an additional SLR photo adapter; check the camera bayonet specification before fitting the adapter. How much working space is available under the objective? The optical configuration provides a 100 mm working distance, which permits the use of small fixtures, probes and tools during inspection while maintaining focus. What illumination does the microscope use for opaque and translucent samples and translucents? This model is equipped with 3 W LED reflected (incident) illumination and 3 W LED transmitted illumination, delivering consistent, low‑heat lighting for both opaque and translucent specimens. Which accessories are supplied with the StereoBlue SB.1903-P? Delivered accessories include eyecups, a dust cover, an instruction manual, a mains lead and a spare fuse; additional camera adapters are available separately if required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Stereo Microscope 7–45x Zoom, 3W LED Incident/Transmitted Illumination, Binocular 45° - Euromex
Combine versatile 7–45x magnification, dual 3 W LED illumination and a 100 mm working distance to support precise component inspection and repeatable quality checks; order the instrument directly via Metav Werkzeuge or consult our specialists for tailored advice. StereoBlue SB.1902-P — Euromex stereomicroscope with 7–45x zoom and dual 3 W LED lighting StereoBlue SB.1902-P is a column‑stand stereomicroscope for inspection and precision assembly tasks, offering a wide zoom range and integrated transmitted and incident illumination for clear, reproducible visual inspection. Stereo zoom 7–45x magnification Integrated 3 W LED incident and transmitted light Binocular 45° head with dioptre adjustment Delivery incl. eyecups, dust cover and mains lead Precise, flexible magnification for inspection and rework The instrument delivers a 7–45x magnification range via a zoom objective (0.7–4.5x) that enables both coarse overview and fine-detail inspection without tool changes. The variable zoom reduces handling time and supports consistent measurements across different workpieces; the field of view of 29.9–4.6 mm allows rapid orientation at low powers and focused examination at high powers. This flexibility is particularly useful in electronics servicing, component assembly and visual quality control where differing levels of detail are required within one process step. Consistent illumination and ergonomic viewing for long sessions A combined 3 W LED incident and 3 W LED transmitted illumination provides even, colour‑stable lighting for opaque and translucent samples, reducing the need for external light sources. The binocular 45° head with dioptre adjustment and an interpupillary range of 55–75 mm promotes comfortable, fatigue‑reduced viewing during prolonged inspection. The 100 mm working distance leaves sufficient space for tools and manipulation under the lens, enabling safe soldering or component alignment without compromising image quality. Robust column stand and ready-to-use delivery for workshop integration Built on a solid column stand and weighing 4.4 kg, the unit offers a compact footprint with stable optical performance that resists vibration in standard workshop environments. Delivery includes practical accessories—eyecups, dust cover, instruction manual, mains lead and spare fuse—so the instrument is operational on arrival and can be integrated quickly into inspection benches or assembly stations. The overall construction and included items support dependable day‑to‑day use and straightforward maintenance. For precision inspection and trustworthy visual inspection workflows, choose the Euromex StereoBlue SB.1902-P via Metav Werkzeuge—contact Metav Werkzeuge for specialist guidance and reliable supply from Emmerich at info@metav-werkzeuge.com or +49 2822 7131930. Technical data Article number: SB.1902-P Manufacturer: Euromex Model series: StereoBlue Product type: Stereomicroscope Facts Magnification range: 7–45x Zoom objective: 0.7–4.5x Working distance: 100 mm Field of view: 29.9–4.6 mm Weight: 4.4 kg Interpupillary distance: 55–75 mm Eyepieces: WF 10x/21 mm Microscope head: Binocular, 45° Special features Illumination: 3 W LED incident; 3 W LED transmitted Dioptre adjustment: both sides Stand: Column stand Included accessories: Eyecups; Dust cover; Instruction manual; Mains lead; Spare fuse FAQ What magnification and zoom does the StereoBlue SB.1902-P provide? The StereoBlue SB.1902-P offers a 7–45x magnification range via a 0.7–4.5x zoom objective, enabling both broad overview at low magnification and detailed inspection at higher powers. Does the instrument provide both incident and transmitted lighting? Yes, the stereomicroscope is equipped with 3 W LED incident and 3 W LED transmitted illumination to handle opaque and translucent samples without additional light sources. How much working distance is available for tool access under the lens? The device provides a 100 mm working distance, which is suitable for manual tasks such as component placement, soldering and manipulation during inspection. Is the head adjustable for different users and comfort? The binocular head is set at 45°, includes dioptre adjustment on both sides and an interpupillary range of 55–75 mm, allowing comfortable viewing for a wide range of operators. What is included with delivery of the SB.1902-P? Delivery for SKU SB.1902-P includes eyecups, a dust cover, instruction manual, mains lead and a spare fuse, making the unit ready for immediate use. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Stereo Microscope Trinocular 7–45x Zoom 0.7–4.5x 3W LED Top/Bottom Illumination - Euromex
Take advantage of the precise optical design and versatile illumination to standardise inspection and documentation workflows; combine the wide 7–45x zoom range with a trinocular head and long 100 mm working distance for reliable results — order directly via Metav Werkzeuge or consult our specialists for application guidance. StereoBlue SB.1903 Stereomicroscope — 7–45x zoom, trinocular 45° (Euromex) The StereoBlue SB.1903 is a trinocular stereomicroscope for inspection and documentation tasks, offering a broad magnification range and both transmitted and incident LED illumination for versatile use in laboratory and production environments. Trinocular 45° head for photo or observation Zoom optics 7–45x magnification range Dual 3 W LED transmitted and incident light 100 mm working distance for larger samples Reliable imaging and documentation for quality control The StereoBlue SB.1903 integrates a trinocular 45° head with a zoom system that covers 7–45x, corresponding to a Zoom 0.7–4.5x objective system. This configuration enables live observation while simultaneously feeding a camera port, which simplifies traceable documentation and process validation. Where photographic records are required, the product notes that additional adapters are necessary; the camera interface options are specified and a suitable SLR adapter must be checked before installation. The optical stability of the zoom mechanism supports reproducible inspection steps, reducing cycle variability in routine quality checks. Comfortable viewing and precise optics for extended sessions Ergonomic design details contribute to fatigue‑free operation: WF 10x/21 mm eyepieces with a dioptre adjustment on both sides and an interpupillary distance of 55–75 mm allow individual visual compensation for operators. The optical layout produces a clear stereo image with an effective 29.9–4.6 mm field of view across the magnification range, making it straightforward to locate features and maintain focus during fine inspection. These characteristics lower operator error rates and improve throughput when multiple users share the instrument. Consistent illumination that adapts to varied samples Integrated illumination comprises 3 W LED incident (reflected) light and 3 W LED transmitted (transmitted) light, delivering stable, low‑heat lighting suitable for both opaque and translucent specimens. The dual‑light arrangement supports contrast enhancement without external lamps, while the LED source offers long life and consistent colour rendering for visual evaluation and image capture. For delicate samples, the reduced thermal output minimises the risk of heat‑induced distortion during extended examinations. Stable stand, generous working distance and practical accessories Mounted on a rack‑and‑pinion stand, the system provides fine vertical control and a 100 mm working distance that accommodates larger or irregularly shaped components. The combination of working distance and zoom range is particularly useful in electronics inspection, materials analysis and precision assembly tasks where space for tooling or probes is needed. Standard delivery includes eyecups, dust cover, manual, mains lead and spare fuse, which speeds deployment on the bench. Note the accessory conditions for camera attachment: certain photo accessories require an additional SLR adapter and the correct camera bayonet. For tailored advice on integrating the Euromex StereoBlue SB.1903 into inspection or documentation workflows, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930 for a specification consultation. Technical Data Manufacturer: Euromex SKU: SB.1903 Manufacturer article number: SB.1903 Model series: StereoBlue Product type: Stereomicroscope Core specifications Magnification range: 7–45x Zoom ratio / objective system: Zoom 0.7–4.5x Working distance: 100 mm Field of view: 29.9–4.6 mm Eyepieces: WF 10x/21 mm Interpupillary distance: 55–75 mm Microscope head: Trinocular, 45° Features and accessories Trinocular 45° head Dioptre adjustment on both sides Rack‑and‑pinion stand Illumination: 3 W LED incident and 3 W LED transmitted Included accessories: eyecups; dust cover; manual; mains lead; spare fuse Camera notes: additional SLR adapter and camera bayonet may be required (AE.5025 / AE.5040) FAQ What magnification range does the instrument cover and how does it support imaging? The stereo microscope provides a 7–45x magnification range via a Zoom 0.7–4.5x objective system; the trinocular head allows simultaneous observation and camera connection for documentation. Is the illumination suitable for both opaque and translucent samples? Yes, the unit combines 3 W LED reflected (incident) light with 3 W LED transmitted light, enabling contrast‑optimised inspection of both opaque components and translucent specimens. Can standard SLR cameras be attached for photography? Photographic connection is possible but may require an additional SLR adapter and the correct camera bayonet; consult the accessory notes (AE.5025 / AE.5040) for compatibility details. What working distance and field of view can be expected for larger samples? A 100 mm working distance is provided to accommodate larger assemblies, with a field of view ranging from 29.9–4.6 mm depending on the selected magnification. Which users and applications is this stereomicroscope best suited to? The instrument is designed for laboratory inspection, industrial quality control and assembly tasks where documentation and operator comfort are priorities; its combination of magnification, lighting and stand stability supports repeatable workflows. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Stereo Microscope Trinocular 7–45x Zoom 0.7–4.5x, 30‑LED Ring/Transmitted Illumination - Euromex
Take advantage of a wide 7–45× zoom range, a long 100 mm working distance and combined ring plus transmitted LED illumination for precise inspection and fast documentation; order the StereoBlue SB.3903 directly via Metav Werkzeuge or ask our consultants for tailored advice. StereoBlue SB.3903 – Trinocular stereomicroscope with 7–45× zoom and LED ring illumination (Euromex) A StereoBlue SB.3903 stereomicroscope for detailed inspections and imaging, designed for laboratory, quality control and educational applications Trinocular 45° head for camera attachment Continuous zoom 7–45× for flexible magnification 100 mm working distance for large samples Ring and transmitted LED illumination Precision optics for flexible inspection The optical system delivers a 7–45× magnification range via a 0.7–4.5× zoom objective, providing a 29.9–4.6 mm field of view that supports both overview checks and fine-detail work. The combination of zoom and wide-field eyepieces permits rapid switching between scales of observation without changing lenses; this reduces inspection time and minimises handling. The binocular head includes WF 10×/21 mm eyepieces and bi‑directional dioptre adjustment, allowing operators with differing vision to focus quickly and maintain accuracy. The 100 mm working distance ensures comfortable manipulation of components under observation while preserving depth perception and image stability. Reliable illumination and documentation-ready Lighting is specified as an LED ring light with 30 LEDs plus LED transmitted illumination, giving consistent, low‑heat illumination for extended sessions and sensitive samples. The trinocular, 45° head makes the instrument immediately suitable for documentation workflows; with the appropriate SLR adapter the top port accommodates a camera for microphotography. Note that additional SLR adapters (e.g. AE.5025, AE.5040) or a compatible photo connection and sensor size (SB.9850) may be required depending on the camera system. This setup supports traceable image records and rapid report generation, improving process control and quality assurance in routine inspections. Ergonomic stand and practical accessory package A rack‑and‑pinion stand provides smooth vertical adjustment and stable positioning for repetitive inspection tasks, while the adjustable interpupillary distance (55–75 mm) and bilateral dioptre control aid operator comfort and reduce fatigue. The instrument is supplied with practical accessories: eyecups, dust cover, instruction manual, mains lead and spare fuse, enabling immediate setup and protected storage. The optical and mechanical design emphasises durability and predictable performance, which makes the microscope suitable for both workshop environments and teaching labs where consistent results are required. For tailored advice on integrating the Euromex StereoBlue SB.3903 into inspection routines, contact Metav Werkzeuge in Emmerich for product availability and technical consultation: info@metav-werkzeuge.com • +49 2822 7131930 Technical Data Article number: SB.3903 SKU: SB.3903 Brand: Euromex Model series: StereoBlue Product type: Stereomicroscope Facts Magnification: 7–45× Zoom objective: 0.7–4.5× Working distance: 100 mm Field of view: 29.9–4.6 mm Eyepieces: WF 10×/21 mm Interpupillary distance: 55–75 mm Special features Trinocular head, 45° LED ring illumination with 30 LEDs LED transmitted illumination Rack‑and‑pinion stand Dioptre adjustment both sides Included: eyecups; dust cover; manual; mains lead; spare fuse Camera adapters: AE.5025, AE.5040 (SLR adapter may be required); SB.9850 photo connection notes FAQ What magnification range is available and how versatile is it? The StereoBlue SB.3903 offers 7–45× magnification via a 0.7–4.5× zoom objective, enabling quick transitions from overview to detailed inspection without lens changes. Is the microscope suitable for photodocumentation? Yes, the trinocular, 45° head is designed for camera use; the StereoBlue SB.3903 accepts an SLR adapter (e.g. AE.5025 or AE.5040) depending on the camera bayonet and may require the specified photo connection or sensor size for SB.9850. How does the lighting support inspection of different materials? A combination of a 30‑LED ring light and LED transmitted illumination provides even, low‑heat lighting suitable for a wide range of specimens, improving contrast and reducing glare for metals, polymers and biological samples. What ergonomic features reduce operator fatigue during long sessions? Adjustable interpupillary distance (55–75 mm), bilateral dioptre control and a comfortable working distance (100 mm) make the instrument easier to use for different operators and minimise posture‑related strain. Which accessories are included for immediate use? The delivery for the StereoBlue SB.3903 includes eyecups, a dust cover, an instruction manual, the mains lead and a spare fuse to ensure prompt commissioning. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Stereo Microscope Zoom 7–45x 3W LED Incident/Transmitted Lighting Binocular 45° - Euromex
Take advantage of the 7–45× zoom, 3 W LED transmitted and incident illumination and a generous 100 mm working distance for reliable component inspection; order the unit directly via Metav Werkzeuge or consult the team for integration advice. StereoBlue SB.1902 — Stereomicroscope with 7–45× zoom and dual LED illumination A StereoBlue SB.1902 stereomicroscope is designed for tasks from precision inspection to assembly workand is mounted on a rack-and-pinion stand for controlled vertical movement 7–45× zoom for precise visual inspection 3 W LED for both transmitted and reflected lighting 100 mm working distance for tooling clearance Rack-and-pinion stand for smooth vertical travel Clear, repeatable inspection with broad magnification The optical configuration, centred on a 0.7–4.5× zoom 0.7–4.5× objective and WF 10×/21 mm eyepieces, supplies a usable magnification range of 7–45× and a usable field of view of 29.9–4.6 mm. This range enables operators to switch quickly between overview and detail without changing optical modules, reducing set-up time and increasing throughput. The binocular head, set at 45°, helps maintain a natural working posture, which supports consistent, fatigue-reduced inspection in production or quality-control environments. Reliable lighting that improves defect detection Integrated 3 W LED incident and 3 W LED transmitted illumination deliver homogeneous, low-heat light for both surface and transmitted-light applications. The dual lighting arrangement permits examination of reflective components and translucent samples without additional lamps, improving contrast and aiding detection of fine defects or material inhomogeneities. The LED sources are energy-efficient and long-lived, helping to keep maintenance intervals predictable and downtime to a minimum. Ergonomics and mechanical stability for repetitive tasks The 100 mm working distance provides clearance for tooling, probes and manipulation during assembly or measurement operations while maintaining sharp imaging. The rack-and-pinion stand ensures steady, controllable vertical travel and rapid height adjustment, supporting repeatable positioning across multiple specimens. Interpupillary adjustment of 55–75 mm and a both-side dioptre adjustment on both sides accommodate different users without compromising optical alignment, decreasing the need for frequent recalibration between operators. Ready-to-use configuration to speed commissioning Delivered with practical accessories — eye cups, dust cover, instruction manual, mains cable and spare fuse — the unit is prepared for immediate use in laboratory benches, inspection stations or educational settings. Weighing 3.6 kg, the assembly balances portability and stability, allowing relocation within a workshop or lab without specialist handling. The optical set-up is suited to a wide range of standard tasks in electronics, watchmaking, medical-device inspection and component assembly. For evaluation or procurement of the StereoBlue SB.1902 and advice on suitable stands or accessories, contact Metav Werkzeuge for direct consultation and delivery arrangements from Emmerich: info@metav-werkzeuge.com | +49 2822 7131930 Technical data Article number: SB.1902 SKU: SB.1902 Brand: Euromex Product type: Stereomicroscope Model series: StereoBlue Facts Magnification: 7–45× Zoom: 0.7–4.5× Working distance: 100 mm Field of view: 29.9–4.6 mm Eyepieces: WF 10×/21 mm Interpupillary distance: 55–75 mm Illumination: 3 W LED incident; 3 W LED transmitted Weight: 3.6 kg Special features Binocular head, 45° Dioptre adjustment on both sides Rack-and-pinion stand Included accessories: eye cups; dust cover; manual; mains cable; spare fuse FAQ What is the usable magnification range? The unit offers a magnification range of 7–45×, achieved via a 0.7–4.5× zoom 0.7–4.5× objective together with WF 10× eyepieces for flexible inspection. Does the system include both transmitted and reflected illumination? Yes, the stereomicroscope is equipped with 3 W LED transmitted and 3 W LED incident lighting for examination of both opaque and translucent specimens. What working distance is available for tooling or measurement probes? The optical head provides a 100 mm working distance, allowing space for manipulation, probes or small fixtures beneath the objective. Can the head be adjusted for different operators? Interpupillary adjustment from 55–75 mm and a both-side dioptre adjustment on both sides permit individual visual compensation and comfortable viewing posture. Which accessories come with the microscope? The delivery includes eye cups, a dust cover, an instruction manual, mains cable and a spare fuse, enabling immediate set-up. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm StereoZoom Trinocular Microscope 7–45x Zoom 29.9–4.6mm Field, 100mm Working Distance - Euromex
Take advantage of the wide zoom range and the 100 mm working distance for flexible inspection tasks; the robust universal stand and trinocular head make camera integration straightforward. Order the unit directly via Metav Werkzeuge or contact the consultants for guidance on camera adapters and application setup. StereoBlue SB.1903-U — Euromex stereomicroscope with 7–45× zoom and trinocular head The StereoBlue SB.1903-U is a compact stereomicroscope designed for precise inspection and documentation tasks in workshops, quality-control benches and teaching environments. Wide zoom range 7–45× magnification Trinocular head at 45° for camera integration 100 mm working distance for large specimens Supplied with eyecups, dust cover and manual Inspect with confidence using a versatile zoom optical system The 7–45× magnification range, enabled by the zoom 0.7–4.5× objective, provides a fast transition from overview to detail without changing objectives. With WF 10×/21 mm eyepieces and a field of view from 29.9–4.6 mm, operators gain both context and resolution for routine inspections. This optical flexibility reduces handling time and improves throughput when checking assemblies or components, while the optical specifications support reproducible visual assessment for inspection reports. Ergonomic observation and reliable camera readiness A trinocular head set at 45° improves posture during extended examinations and enables straightforward connection of imaging equipment. The 100 mm working distance allows inspection of bulkier items and tool setups without awkward positioning. Camera attachment is supported but requires additional adapters: the AE.5025 and AE.5040 options need an extra SLR photo adapter and the correct camera bayonet, while SB.9850 requires a photo port and a compatible sensor size. These conditions ensure secure, repeatable documentation when adding digital imaging to the inspection workflow. Built for workshop use and simple integration into existing setups The universal stand provides a stable base for frequent handling and relocation across workstations; at 15.5 kg, the unit combines sturdiness with relocatability. Supplied accessories include eyecups, a dust cover and a manual, allowing immediate use on arrival. The instrument is delivered without illumination, offering the freedom to specify internal or external lighting solutions tailored to the application. This modular approach helps workshops choose illumination that matches sample contrast requirements and budget considerations. Contact Metav Werkzeuge for tailored advice on integrating the Euromex StereoBlue SB.1903-U into the production environment — call +49 2822 7131930 or email info@metav-werkzeuge.com for adapter recommendations and delivery options Technical data Article number: SB.1903-U Manufacturer: Euromex SKU: SB.1903-U Model series: StereoBlue Product type: Stereomicroscope Label: StereoBlue SB.1903-U Facts Magnification range: 7–45× Zoom objective: 0.7–4.5× Eyepieces: WF 10×/21 mm Field of view: 29.9–4.6 mm Working distance: 100 mm Pupillary distance: 55–75 mm Weight: 15.5 kg Special features Trinocular head, 45° Diopter adjustment both sides Universal stand execution Supplied: eyecups; dust cover; manual Illumination: without lighting Camera adapter conditions: AE.5025 and AE.5040 require an additional SLR photo adapter and a camera bayonet; SB.9850 requires photo port and specified sensor size FAQ What magnification range does this stereomicroscope cover? The Euromex StereoBlue SB.1903-U offers a 7–45× magnification range via its zoom objective, allowing quick switching between broad overviews and detailed inspection. Is illumination included with the unit? No, the unit is supplied without illumination, which permits selection of external or dedicated illumination systems to match sample needs and lighting preferences. Can a camera be attached for image documentation? Yes; the trinocular head supports camera integration. Note that AE.5025 and AE.5040 require an additional SLR photo adapter and the correct camera bayonet, while SB.9850 requires a photo port and an appropriate sensor size for proper function. Which applications suit this stereomicroscope best? The inspection microscope is well suited to quality control, small-parts assembly checks, failure analysis and teaching labs where flexible magnification and camera documentation are required. What ergonomic adjustments are available on the head? The head provides diopter adjustment on both sides and a pupillary distance range of 55–75 mm, combined with the 45° head angle for comfortable, prolonged use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Trinocular Stereozoom Microscope 7–45x Zoom 29.9–4.6mm Field, 30 LED Ring + Transmitted Light - Euromex
Take advantage of the combination of versatile 7–45x magnification, a trinocular 45° head and dual LED illumination for reliable inspection and documentation. Order the instrument directly via Metav Werkzeuge or consult the specialists for configuration and camera integration. StereoBlue SB.3903-P – Euromex stereomicroscope with 7–45x zoom and trinocular 45° head The StereoBlue SB.3903-P is a column‑stand stereomicroscope designed for inspection, assembly and documentation tasks, offering a broad zoom range, combined reflected and transmitted LED illumination, and a 100 mm working distance. Zoom range 7–45x for precise inspection Trinocular 45° head for camera integration 30‑LED ring and transmitted LED illumination Column stand with 100 mm working distance Efficient inspection with versatile magnification The optical system, centred on a zoom 0.7–4.5x objective paired with WF 10x/21 mm eyepieces, delivers a practical magnification span of 7–45x and a field of view of 29.9–4.6 mm, enabling close inspection of small components as well as broader overviews without changing objectives. This reduces cycle times in quality control and speeds up visual tasks, since the magnification can be adjusted continuously. The trinocular configuration supports image capture while maintaining binocular observation for uninterrupted work. Bright, even illumination for reproducible results Illumination combines a 30‑LED reflected ring light with an integrated transmitted LED, providing both surface detail and transmitted-light contrast where needed. The paired lighting modes enhance defect detection on reflective and translucent materials and reduce the need for external lamps. Because the light sources are LED based, colour rendering remains stable and service intervals are minimised, supporting consistent documentation and reliable inspections over extended use. Ergonomic design that supports workflow and documentation The 45° trinocular head with dioptre adjustment on both eyepieces and an adjustable interpupillary distance of 55–75 mm promotes comfortable, fatigue‑reduced observation during prolonged tasks. The column stand and a 100 mm working distance accommodate a range of assemblies and fixtures, allowing room for probes, tweezers or small tools beneath the head. Integration of a camera is straightforward thanks to the trinocular port, permitting traceable image capture without interrupting manual inspection. Accessories, camera options and practical delivery contents The instrument is supplied ready for use with eyecups, dust cover, manual, power lead and spare fuse, providing immediate operation on arrival. For digital imaging, certain camera mounts require an additional SLR adapter—AE.5025 or AE.5040—and attention to the camera bayonet type. A dedicated photo connection option (SB.9850) is available but requires matching sensor size and port specifications. These compatibility notes help plan documentation setups and prevent unexpected adapter purchases. Contact Metav Werkzeuge today for tailored advice and ordering of the Euromex StereoBlue SB.3903-P; call +49 2822 7131930 or eMail info@metav-werkzeuge.com for configuration support and camera‑integration guidance Technical Data Article number: SB.3903-P Brand: Euromex Model series: StereoBlue Type: Stereomicroscope Microscope head: Trinocular, 45° Stand: Column stand Delivery contents: Eyecups; Dust cover; Manual; Power lead; Spare fuse Measurements / Core Data Magnification: 7–45x Magnification min: 7x Magnification max: 45x Objective zoom: 0.7–4.5x Working distance: 100 mm Field of view: 29.9–4.6 mm Eyepieces: WF 10x/21 mm Pupillary distance: 55–75 mm Dioptre adjustment: Both-sided Features / Compatibility Illumination: Reflected ring light with 30 LEDs; transmitted LED Trinocular head enables camera mounting Column stand for flexible workpiece access AE.5025 / AE.5040: Additional SLR adapter required; check camera bayonet SB.9850: Photo connection requires specified sensor size and photo port FAQ What magnification range is available and how does it help inspection? The stereomicroscope offers a 7–45x magnification range via a 0.7–4.5x zoom objective and WF 10x eyepieces, allowing both detailed examination and wider overviews without objective changes, which speeds up inspection workflows. Can a camera be attached to the instrument for documentation? Yes, the trinocular port supports camera attachment; AE.5025 and AE.5040 require an additional SLR adapter and correct bayonet, while SB.9850 requires a matching photo connection and sensor size for proper integration with the StereoBlue SB.3903-P. What illumination options are included for different sample types? The instrument combines a 30‑LED reflected ring light with transmitted LED illumination, providing surface contrast for reflective parts and transmission contrast for thin or translucent samples, reducing the need for external lighting. Is the stereomicroscope comfortable for extended use? Ergonomic features such as a 45° head, dioptre adjustment on both eyepieces and an adjustable pupillary distance (55–75 mm) support comfortable observation during longer sessions and reduce operator fatigue. What is included in the delivery scope? Delivery includes eyecups, dust cover, manual, power lead and spare fuse, enabling immediate operation and basic protection during storage. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110 mm NexiusZoom Gemmology Trinocular Stereo Microscope 6.7–45x Zoom, LED Toplight & Halogen Transmitted - Euromex
Take advantage of the combination of precise optics, flexible illumination and a purpose-built gemmology stand for consistent inspection results; order directly via Metav Werkzeuge or consult the team for configuration and accessory advice. NexiusZoom Gemmologie NZ.1903-GEML — stereomicroscope with 6.7–45x zoom and dual illumination A NexiusZoom Gemmologie NZ.1903-GEML stereomicroscope engineered for gemmological inspection, featuring a 45° trinocular head and a backward-tilting stand for comfortable, repeatable observation. 6.7–45x zoom range Dimmable 1 W LED and 30 W halogen 45° trinocular head, tilt 0–45° 110 mm working distance Precision optics that reveal detail and support consistent grading The optical system provides a 6.7–45x magnification range via a 0.67–4.5x zoom 0.67–4.5x objective, enabling both overview checks and fine detail work without changing lenses. The main optics are treated with anti-fungal and anti-reflective coatings to maintain image clarity and minimise maintenance in humid or variable environments. These specifications translate into a reduced need for rework and faster decision cycles in quality control and gem grading processes. For laboratories and workshops seeking measurable improvements in throughput, the optical configuration offers an effective balance of field of view and detail resolution. Controlled illumination for accurate colour and inclusion assessment Illumination is configured for both incident and transmitted light: a dimmable 1 W LED for reflected light and a 30 W halogen source for transmitted light, plus an included darkfield transmitted unit with iris diaphragm. This dual approach allows reliable evaluation of internal features and true colour rendition, crucial when assessing clarity, cut and treatment of gemstones. The adjustable LED intensity and the iris diaphragm help standardise viewing conditions, supporting comparable results between operators and across shifts—a practical advantage for quality systems and certification processes. Ergonomic handling that reduces fatigue and increases repeatability The instrument’s 45° trinocular head and backward-tilting gemmology stand (0–45°) support extended use with lower operator strain and easier documentation, while the coarse focus with adjustable friction provides tactile control for precise z-axis positioning. Comfort-focused features include dioptre adjustment ±5 on both eyepieces and an interpupillary distance of 54–75 mm, accommodating a wide range of users and enabling reproducible setups. The generous 110 mm working distance facilitates the use of clamps and handling tools during inspection without compromising optical performance. Flexible configuration and documentation-ready options The system is supplied with practical accessories—object clamp; darkfield transmitted unit with iris diaphragm; power lead; dust cover; spare fuse; and manual—and offers several upgrade paths for imaging and workflow integration. Photo options are available (photo port and sensor compatibility noted; additional SLR adapters AE.5040 / AE.5020 may be required), and alternative heads or retrofit kits (NZ.5302, NZ.5303, NZ.5312, NZ.5313) allow adaptation to changing laboratory demands. This modularity supports long-term investment protection and makes the instrument suitable for both hands-on gemmology work and digitised documentation workflows. For tailored advice on configuring the NexiusZoom Gemmologie NZ.1903-GEML to specific laboratory or production requirements, contact Metav Werkzeuge for ordering and technical consultation at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: NZ.1903-GEML SKU: NZ.1903-GEML Brand: Euromex Product type: Stereomicroscope Model series: NexiusZoom Gemmologie Description: Stereomicroscope NexiusZoom Gemmologie NZ.1903-GEML Manufacturer: Euromex Core specifications Magnification: 6.7–45x Zoom ratio: 1:6.7 Objective zoom: 0.67–4.5x Working distance: 110 mm Eyepieces: HWF 10x/22 mm Pupillary distance: 54–75 mm Diopter adjustment: ±5 both sides Focus: Coarse drive with adjustable friction Head: Trinocular, 45° Weight: 8.4 kg Dimensions: 510 x 260 x 310 mm (H x W x D) Special features Gemmology stand, backward tilt 0–45° Dimmable 1 W LED incident illumination 30 W halogen transmitted illumination Darkfield transmitted unit with iris diaphragm included Anti-fungal and anti-reflective optical coatings Included accessories: object clamp; power lead; dust cover; spare fuse; manual Photo options: photo port (NZ.9850) and SLR adapters (AE.5040, AE.5020) — check camera bayonet Exchange/configuration heads: NZ.5302, NZ.5303, NZ.5312, NZ.5313 Gallery thumbnail available FAQ What magnification range does the instrument cover? The NexiusZoom Gemmologie NZ.1903-GEML covers a magnification range of 6.7–45x, delivered through a 0.67–4.5x zoom 0.67–4.5x objective to serve both overview inspection and detailed examination. Is the microscope suitable for documenting gemstones with a camera? Yes. The NZ.1903-GEML supports photographic connections; a photo port and compatible sensor (see NZ.9850) are required and some camera mounts will need an additional SLR adapter (AE.5040 or AE.5020) depending on the camera bayonet. Which illumination modes are provided and why are they important? The unit offers a dimmable 1 W LED for incident lighting and a 30 W halogen for transmitted lighting. This combination ensures accurate colour rendition and highlights internal features using darkfield transmitted illumination with an iris diaphragm. How does the design support operator comfort during long inspections? Comfort features include a 45° trinocular head, backward tilt 0–45°, dioptre adjustment of ±5, an interpupillary range of 54–75 mm, and an adjustable-friction coarse focus, all of which reduce strain and enable repeatable positioning. What accessories are supplied as standard? Standard delivery for the NexiusZoom Gemmologie NZ.1903-GEML includes an object clamp; darkfield transmitted unit with iris diaphragm; power lead; dust cover; spare fuse; and instruction manual. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm NexiusZoom ESD Stereo Zoom Microscope 6.7–45x Binocular 45° ESD - Euromex
Take advantage of the combination of precise zoom optics, ESD-safe construction and a stable universal stand for reliable inspection and assembly tasks; order the unit directly via Metav Werkzeuge or contact our consultants for tailored advice. NexiusZoom ESD NZ.1902-U-ESD stereomicroscope — ESD-safe zoom optics, 6.7–45x The NexiusZoom ESD NZ.1902-U-ESD is a binocular stereomicroscope designed for static-sensitive inspection and assembly, offering a wide zoom range and a generous working distance on a universal stand. ESD-safe design for static-sensitive work Smooth zoom 6.7–45x range 110 mm working distance for tooling access Binocular 45° head with dioptre ±5 Versatile optical performance for inspection and assembly The optical system delivers a magnification range of 6.7–45x, driven by a zoom objective of 0.67–4.5x and paired with HWF 10x/22 mm eyepieces; this setup provides flexible inspection scales without frequent objective changes. The optics are treated with an antifungal treatment and an anti-reflection coating, which improves image contrast and long-term clarity in workshop environments where humidity or airborne spores may accelerate deterioration. The 1:6.7 zoom ratio permits smooth transitions between overview and detailed views, reducing handling time and improving throughput for repetitive quality checks. Safe, ergonomic operation for longer shifts ESD protection is integrated into the design to reduce the risk of electrostatic discharge when inspecting sensitive electronics; the ESD execution conforms to catalogue specifications for static-safe equipment. A binocular head angled at 45° and an adjustable pupillary distance of 54–75 mm support comfortable posture and quicker acclimatisation for different operators. The coarse focusing uses a coarse focus drive with adjustable friction that locks the focus feel to match user preference, while dioptre adjustment of ±5 on each eyepiece ensures sharp vision correction without auxiliary lenses. Together these features lower operator fatigue and increase repeatability during long inspection cycles. Stable support and practical delivery for workshop use Mounted on a universal stand, the instrument provides a rigid platform for assembly and measurement tasks where stability is essential. The working distance of 110 mm accommodates hand tools and small fixtures beneath the objective while maintaining sufficient clearance for component manipulation. The delivery includes practical accessories such as eye cups, a dust cover and an instruction manual to ensure immediate use on arrival. Notes on accessory compatibility are provided for configurable heads and add-ons, enabling modular upgrades while maintaining system integrity. Contact Metav Werkzeuge for a technical consultation or to request a quote for the NexiusZoom ESD; our specialists at Metav Werkzeuge can advise on configuration and delivery to your workshop — eMail: info@metav-werkzeuge.com; Tel: +49 2822 7131930 Technical Data Article number: NZ.1902-U-ESD SKU: NZ.1902-U-ESD Brand: Euromex Category: Stereo-Zoom-Sets Core specifications Magnification: 6.7–45x Working distance: 110 mm Zoom ratio: 1:6.7 Objective system: Zoom 0.67–4.5x Eyepieces: HWF 10x/22 mm Weight: 15.6 kg Pupillary distance: 54–75 mm Dioptre adjustment: ±5 each side Design & special features ESD execution (static discharge protection according to catalogue) Binocular head, 45° Coarse focus with adjustable friction Optics with antifungal treatment and anti-reflection coating No integrated illumination (without lighting) Universal stand configuration Supplied: eye cups; dust cover; instruction manual Accessory notes: NZ.5302, NZ.5303 (exchange/configuration heads); NZ.9095 (with new microscope); NZ.9520, NZ.9525 (not to be used with auxiliary lenses); AE.5168-NZ (with new microscope only) FAQ What magnification range does the stereomicroscope cover? The unit offers a magnification range of 6.7–45x, combining the zoom objective and 10x eyepieces for flexible inspection scales. Is the instrument suitable for use with electronic assemblies? Yes, the ESD execution provides protection against electrostatic discharge, making the stereomicroscope suitable for handling and inspecting static-sensitive electronic components. What is the working distance and why does it matter? A working distance of 110 mm affords enough clearance for tools and fixtures beneath the objective, improving accessibility during assembly and measurement tasks. Which eyepieces are supplied with the instrument? The microscope is supplied with HWF 10x/22 mm eyepieces as standard, delivering a comfortable field of view for detailed inspection. Can the head or optics be exchanged or upgraded? Certain exchange or configuration heads are compatible (see NZ.5302, NZ.5303), and some accessories require ordering the microscope anew; consult Metav Werkzeuge for specific upgrade paths. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm NexiusZoom ESD Stereo Zoom Microscope 6.7–45x, 3W LED Incident/Transmitted Lighting - Euromex
The combination of ESD-safe construction, a 6.7–45x zoom range and a comfortable 110 mm working distance delivers reliable and versatile inspection for electronics and assembly tasks; benefit from clear optics and robust handling to maintain throughput and quality on the shop floor. Order the NexiusZoom directly via Metav Werkzeuge or contact the consultants for tailored advice. NexiusZoom ESD NZ.1902-P-ESD Stereomicroscope — 6.7–45x zoom, ESD-safe optics The NexiusZoom ESD NZ.1902-P-ESD is a stereo microscope designed for ESD-safe inspection and precision assembly tasks, combining a wide magnification range with controlled illumination and ergonomic handling. ESD-safe construction for electrostatic protection Wide zoom range 6.7–45x for versatile inspection 110 mm working distance for easy component access Dual 3 W LED incident and transmitted illumination Consistent results for electronics inspection through ESD-safe optics The ESD-safe design reduces the risk of electrostatic damage during close-up inspection and assembly, making this stereo microscope particularly suitable for electronics production and repair. The optical system provides a 6.7–45x magnification span with a 1:6.7 zoom ratio, enabling both broad overviews and detailed examinations without changing objectives. A zoom objective of 0.67–4.5x and HWF 10x/22 mm eyepieces deliver a crisp, comfortable image; antipilz (anti-fungal) treatment and anti-reflective coatings stabilise image quality in long-term daily use. These features together mean fewer interruptions for lens changes and a stable visual baseline for quality assurance procedures. Ergonomic design that reduces operator fatigue and speeds inspection A 110 mm working distance gives technicians room to manipulate components and tooling beneath the lens while preserving field of view and focus. The binocular head at 45° optimises posture for repetitive tasks; interpupillary adjustment 54–75 mm and dioptre ±5 on both eyepieces allow individual visual calibration without additional accessories. Focus is achieved via a coarse focus drive with adjustable friction to match operator preference and task speed, which improves repeatability and reduces overshoot during fine adjustments. At a weight of 5.0 kg, the assembled unit is stable on its column stand yet can be integrated into bench workflows where a compact footprint and secure positioning are essential. Reliable illumination, practical accessories and configuration options Integrated 3 W LED top (incident) and bottom (transmitted) lighting provides balanced, energy-efficient illumination for opaque and translucent samples, minimising heat at the workplane and offering consistent colour rendering for visual inspection. Delivery includes eye cups, dust cover, instruction manual, mains lead and spare fuse, supporting immediate commissioning. Several accessory heads and configuration conditions are noted (NZ.5302, NZ.5303 for exchange heads; NZ.9095 and AE.5168-NZ available only with new orders; NZ.9520 and NZ.9525 not to be used with auxiliary lenses), so project-specific setups should be confirmed before purchase. Together, lighting, optical coatings and accessory management ensure documented inspection steps remain comparable over time and across workstations. Discuss inspection and ESD requirements with Metav Werkzeuge for a tailored configuration of the NexiusZoom ESD NZ.1902-P-ESD or request a compatibility check via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: NZ.1902-P-ESD SKU: NZ.1902-P-ESD Brand: Euromex Model series: NexiusZoom ESD Type: Stereomicroscope Core data Magnification: 6.7–45x Zoom ratio: 1:6.7 Zoom objective: 0.67–4.5x Working distance: 110 mm Eyepieces: HWF 10x/22 mm Weight (kg): 5.0 Special features ESD version 3 W LED incident and transmitted illumination Binocular head, 45° Coarse focus with adjustable friction Dioptre adjustment ±5 both sides Interpupillary distance 54–75 mm Column stand execution Included accessories: eye cups; dust cover; manual; mains lead; spare fuse Accessory conditions: NZ.5302, NZ.5303, NZ.9095, NZ.9520, NZ.9525, AE.5168-NZ FAQ What magnification range does this stereomicroscope offer? The NexiusZoom ESD NZ.1902-P-ESD covers a 6.7–45x magnification range with a 1:6.7 zoom ratio, enabling both overview imaging and detailed inspection without objective changes. Is the microscope suitable for electrostatic-sensitive assemblies? Yes. The unit is supplied in an ESD execution to reduce electrostatic discharge risk during inspection of sensitive electronic components. What illumination options are provided? Integrated 3 W LED lighting is provided for both incident (top) and transmitted (bottom) illumination, supporting opaque and translucent sample work under consistent lighting. Can the head or optics be reconfigured later? Certain exchange or configuration heads (NZ.5302, NZ.5303) are available; note that some accessories like NZ.9095 and AE.5168-NZ are only supplied with a newly ordered microscope, and NZ.9520/NZ.9525 must not be used with auxiliary lenses—please confirm configuration needs before ordering. What is included in the delivery? Delivery includes eye cups, a dust cover, instruction manual, mains lead and a spare fuse for immediate commissioning of the microscope. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm NexiusZoom ESD Trinocular Stereo Microscope 6.7–45x, 3W LED Coaxial Illumination - Euromex
Combining ESD-safe construction, a 6.7–45× zoom range and twin 3 W LED incident/transmitted illumination, this stereomicroscope delivers reliable inspection and straightforward documentation for electronics and precision workshops. Order the NexiusZoom ESD NZ.1903-S-ESD directly via Metav Werkzeuge or consult their specialists if technical advice is required. NexiusZoom ESD NZ.1903-S-ESD — Trinocular stereomicroscope with 6.7–45× zoom and ESD protection (Euromex) The NexiusZoom ESD NZ.1903-S-ESD is a trinocular stereomicroscope designed for ESD-safe inspection, comfortable observation and camera-ready documentation in electronics assembly, quality control and delicate assembly tasks. ESD-safe construction for electronics work 6.7–45× zoom range for flexible magnification 3 W LED incident and transmitted illumination Trinocular 45° head for camera attachment Rack-and-pinion stand for stable focusing Precise visual inspection with ESD-safe optics The compact optical system combines a zoom 0.67–4.5× zoom objective with a 1:6.7 zoom ratio to provide a continuous 6.7–45× magnification band, enabling quick switching between overview and fine-detail inspection without changing objectives. The optics are treated with anti-fungus and anti-reflection coatings, which improve image contrast and reduce maintenance cycles in workshop environments. For routine inspection of sensitive assemblies, the ESD version reduces electrostatic risk while preserving optical performance. Consistent illumination and ergonomic observation Integrated 3 W LED incident (top) and transmitted (bottom) illumination offers uniform, low-heat lighting for contrast-rich images and longer component exposure. The 110 mm working distance keeps tools and probes accessible while maintaining focal clarity, and the trinocular 45° head supports simultaneous binocular viewing and camera mounting for documentation. Comfort features such as a 54–75 mm pupillary distance range and ±5 dioptre adjustment ensure fatigue-free use during prolonged tasks. Stable mechanics for repeatable focusing Mounted on a rack-and-pinion stand, the instrument delivers precise vertical travel with minimal play; the coarse focus with adjustable friction lets operators tailor resistance for fine positioning or faster coarse moves. The microscope’s mass of 5.1 kg contributes to mechanical stability, reducing vibration and improving repeatability across inspection cycles—an important factor when measurements or defect detection require consistent imaging. Camera integration and ready-to-use accessories A dedicated trinocular port facilitates digital capture and documentation; note that certain camera interfaces require accessory selection (for example, photo attachment NZ.9850 and SLR adapters AE.5025/AE.5040 where applicable). The scope is supplied with essential items—eyecups, dust cover, manual, mains lead and spare fuse—so it arrives ready for standard inspection tasks. Optional exchange heads and configuration modules are available but must be selected in line with the existing instrument configuration. For precision electronics inspection and documented reporting, select the Euromex NexiusZoom ESD NZ.1903-S-ESD—contact Metav Werkzeuge GmbH in Emmerich for tailored advice or to arrange a specification check at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: NZ.1903-S-ESD SKU: NZ.1903-S-ESD Manufacturer: Euromex Model series: NexiusZoom ESD Facts Magnification range: 6.7–45× Zoom ratio: 1:6.7 Objective zoom: 0.67–4.5× Working distance: 110 mm Illumination: 3 W LED incident; 3 W LED transmitted Weight: 5.1 kg Oculars: HWF 10× / 22 mm Pupillary distance: 54–75 mm Dioptre adjustment: ±5 both sides Special features Trinocular microscope head, 45° ESD version for electrostatic protection Optics with anti-fungus and anti-reflection coatings Coarse focus with adjustable friction Rack-and-pinion stand Included accessories: eyecups; dust cover; manual; mains lead; spare fuse Accessory notes: NZ.9850 requires specified sensor size; AE.5025 and AE.5040 require additional SLR adapter and compatible camera bayonet; NZ.9520/NZ.9525 not to be used with certain attachment lenses FAQ What magnification range does this stereomicroscope offer? The NexiusZoom ESD NZ.1903-S-ESD provides a continuous 6.7–45× magnification range via its zoom objective, suitable for both overview checks and detailed inspection. Is the instrument safe for use on electronic assemblies? Yes, the ESD version includes measures to reduce electrostatic discharge risk, making the NexiusZoom ESD NZ.1903-S-ESD appropriate for electronics inspection and handling sensitive components. Can a camera be attached for documentation? A camera can be fitted to the trinocular port; the product supports photo attachments such as NZ.9850 and may require AE.5025 or AE.5040 SLR adapters depending on the camera bayonet and sensor size. What lighting options are integrated? The instrument features both incident and transmitted illumination, each provided by a 3 W LED, offering versatile lighting for surface inspection and translucency checks. Does the microscope include accessories on delivery? Yes, delivery includes eyecups, dust cover, manual, mains lead and a spare fuse, so it is ready for standard inspection tasks on arrival. How stable is the focusing mechanism? The rack-and-pinion stand combined with a coarse focus and adjustable friction provides stable vertical travel and repeatable positioning for precision inspection. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm NexiusZoom EVO Gemmology Trinocular Stereo Microscope 6.5–55x Zoom, 7W Flood / 30W Transmit Illumination - Euromex
Take advantage of the 6.5–55x magnification, the ergonomic trinocular 45° head and the combined incident/transmitted illumination for reliable gemmological inspection; order via Metav Werkzeuge or request advice from our consultants for configuration and delivery. NexiusZoom EVO Gemmologie NZ.1703-GEMF — Stereomicroscope with 6.5–55x zoom and trinocular 45° head (Euromex) The NexiusZoom EVO Gemmologie NZ.1703-GEMF is a purpose-built stereomicroscope for gemmology, offering wide magnification flexibility, a comfortable viewing angle and both reflected and transmitted illumination for crystal‑clear stone assessment. 6.5–55x zoom range for detailed inspection Trinocular 45° head for ergonomic viewing Combined incident and transmitted illumination High‑resolution inspection for precise gem grading The optical system delivers a 6.5–55x working magnification based on a zoom 0.65–5.5x objective and HWF 10x/23 mm eyepieces, giving a practical zoom ratio of 1:8.4 with click‑stops for repeatable settings. The optics are treated with an antifungal coating and an anti‑reflective coating, which reduce stray reflections and protect lenses in humid environments. This combination allows consistent surface and inclusion evaluation while reducing observer fatigue; the fixed optical parameters make documentation and comparison straightforward. Ergonomic design that supports long inspection sessions An ergonomically inclined trinocular 45° head and an adjustable interpupillary range of 54–75 mm reduce neck strain and permit comfortable binocular viewing for extended periods. The coarse focus has adjustable friction, enabling steady, vibration‑resistant focusing during fine inspection. A ±5 dioptre adjustment on both eyepieces accommodates individual eyesight differences without auxiliary lenses. The generous 110 mm working distance allows convenient handling of stones and tools beneath the optics, improving workflow and safety when setting or examining mounted gems. Lighting and imaging for reliable contrast and documentation Integrated illumination combines reflected light (incident) via a 7 W fluorescent lamp and transmitted light (through‑illumination) via a 30 W halogen source, giving both surface detail and internal contrast as required for gemmological analysis. A supplied darkfield transmitted unit with an iris diaphragm enhances edge definition and reveals inclusions. For image capture, the instrument offers a photo connection but requires a specified sensor size and an additional SLR adapter (AE.5040) for standard camera mounting; certain heads and sensors are available as options. Note that auxiliary front lenses must not be used in combination with the darkfield adapter (see accessory restriction NZ.9525) to avoid optical conflicts. Complete delivery and configurable options for professional labs The supply scope includes an object clamp, the darkfield transmitted unit with iris, mains lead, dust cover, spare fuse and operating instructions, which supports immediate use in a laboratory environment. Several exchange/configuration heads are available (NZ.5302, NZ.5303, NZ.5312, NZ.5313) to tailor the rig to specific imaging or inspection needs; photo interfaces (NZ.9850) will require the correct sensor specification. The instrument’s robust configuration makes it well‑suited to gemmology benches, university labs and professional inspection stations that require a combination of optical precision and practical handling. For professional gemmology tasks, consult Metav Werkzeuge about the Euromex NexiusZoom EVO to define the right head and camera configuration — Metav Werkzeuge offers local stock handling from Emmerich and specialist advice by e‑mail at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical Data Article number: NZ.1703-GEMF SKU: NZ.1703-GEMF Manufacturer: Euromex Facts Magnification: 6.5–55x Zoom: 0.65–5.5x Zoom ratio: 1:8.4 Working distance: 110 mm Eyepieces: HWF 10x/23 mm Interpupillary distance: 54–75 mm Dioptre adjustment: ±5 both sides Maximum magnification: 55 Minimum magnification: 6.5 Focusing: coarse with adjustable friction Lighting: reflected 7 W fluorescent; transmitted 30 W halogen Special features Trinocular 45° head Gemmology stand, backwards tilt 0–45° Optics with antifungal and anti‑reflective coating Click‑stops for repeatable zoom positions Included accessories: object clamp; darkfield transmitted unit with iris diaphragm; mains lead; dust cover; spare fuse; instructions Photo connection requires specified sensor size; additional SLR adapter AE.5040 may be required Not to be used together with auxiliary front lenses (NZ.9525) Exchange/configuration heads available: NZ.5302, NZ.5303, NZ.5312, NZ.5313 FAQ What magnification range does the stereomicroscope cover? The NexiusZoom EVO Gemmologie NZ.1703-GEMF provides a 6.5–55x magnification range via its zoom 0.65–5.5x objective and HWF 10x eyepieces, allowing both overview and detailed inclusion inspection. Is the instrument suitable for photographing gemstones? Yes — the trinocular head supports imaging, but the NZ.1703-GEMF requires a photo connection with a designated sensor size and often an additional SLR adapter (AE.5040); camera bayonet compatibility should be checked before purchase. Which illumination modes are available for inspection? The NZ.1703-GEMF includes reflected illumination with a 7 W fluorescent lamp and transmitted illumination via a 30 W halogen lamp, plus a supplied darkfield transmitted unit with iris diaphragm for enhanced contrast. Can the head angle and focus be adjusted for comfort? The trinocular head is set at 45°, the stand tilts 0–45° backwards, interpupillary distance is adjustable from 54–75 mm, and the coarse focus features adjustable friction for steady focusing during prolonged use. What is included in the delivery and which optional heads are available? Delivery contains an object clamp, the darkfield transmitted unit with iris, mains lead, dust cover, spare fuse and manual. Exchange/configuration heads (NZ.5302, NZ.5303, NZ.5312, NZ.5313) and photo options (NZ.9850) are available as extras. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm NexiusZoom EVO Stereo Microscope 6.5–55x Zoom 0.65–5.5x 3W LED Brightfield/Darkfield - Euromex
High optical performance, combined with a long working distance and stable column stand , delivers precise, repeatable inspections for assembly and quality control. Benefit from the trinocular head and dual LED illumination for reliable visual observation and documentation—order the NexiusZoom EVO NZ.1703-P via Metav Werkzeuge or consult our specialists for configuration advice. NexiusZoom EVO NZ.1703-P – Stereomicroscope with 6.5–55x zoom and 110 mm working distance (Euromex) A NexiusZoom EVO NZ.1703-P stereomicroscope is designed for precision inspection, assembly work and laboratory observation with integrated documentation capability Stereomicroscope with 6.5–55x zoom 110 mm long working distance for tool clearance Trinocular 45° head for documentation Dual 3 W LED incident and transmitted lighting High-magnification optics for reliable defect detection The optical system combines a zoom lens (0.65–5.5x) with HWF 10x/23 mm eyepieces, providing an effective magnification range of 6.5–55x for detailed visual inspection. The zoom is engineered with a 1:8.4 ratio and click-stops, enabling repeatable positioning when switching magnifications. Antifungal treatment and anti-reflection coatings on the optics reduce stray light and internal reflections, which improves contrast and makes fine surface defects and solder joints easier to identify. This optical setup supports consistent quality control in production or laboratory environments. Spacious working distance and ergonomic handling for routine tasks A 110 mm working distance delivers clearance for assembly tools, probes and fixtures, reducing the need to reposition components during inspection. The trinocular, 45° head with dioptre adjustment of ±5 on both sides and an interpupillary range of 54–75 mm ensures comfortable, ergonomic observation for users of different stature. Focus is achieved via a coarse drive with adjustable friction, enabling controlled movement and resistance to suit operator preference. These design choices reduce fatigue and increase throughput during lengthy inspection sessions. Integrated illumination and documentation-ready configuration Illumination comprises 3 W LED incident and 3 W LED transmitted lighting, offering flexible contrast options for both opaque and translucent samples. Consistent, energy-efficient LED light sources maintain colour stability and avoid heat-related specimen distortion. The trinocular port facilitates camera attachment for documentation; specific photo accessories and adapters are available for digital capture and integration into inspection workflows. Where image capture is required, select the appropriate photo connection and sensor size to match the desired documentation standards. Robust stand and practical accessories for workshop use The column stand construction provides a stable platform for precise positioning and repeatable measurements in a workshop or laboratory setting. With a compact footprint and a net weight of 5.2 kg, the system balances portability with durability. Standard delivery includes eyecups, a dust cover, user manual, mains cable and a spare fuse, ensuring the instrument is inspection-ready on arrival. Optional exchange heads and camera adapters extend the unit’s versatility for specialised tasks without compromising core performance. For tailored advice on configuration, accessories and integration of the NexiusZoom EVO NZ.1703-P into inspection workflows, contact Metav Werkzeuge for expert guidance and ordering: info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: NZ.1703-P SKU: NZ.1703-P Brand: Euromex Model series: NexiusZoom EVO Facts Magnification: 6.5–55x Zoom: 0.65–5.5x Zoom ratio: 1:8.4 (click-stops) Working distance: 110 mm Weight: 5.2 kg Eyepieces: HWF 10x/23 mm Special features Microscope head: Trinocular, 45° Illumination: 3 W LED incident and 3 W LED transmitted Optics: Antifungal treatment and anti-reflection coating Focusing: Coarse drive with adjustable friction Dioptre adjustment: ±5 both sides Interpupillary distance: 54–75 mm Stand: Column stand Included accessories: Eyecups; dust cover; manual; mains cable; spare fuse Accessory notes: Photo connection NZ.9850 requires specified sensor size; specific SLR adapters AE.5025/AE.5040 require matching camera bayonet; some configuration heads require order review FAQ What magnification range does the system cover? The instrument offers a magnification range of 6.5–55x, achieved by the zoom lens (0.65–5.5x) combined with the HWF 10x eyepieces in the NexiusZoom EVO NZ.1703-P. Is the working distance sufficient for using tools under the objective? Yes, the 110 mm working distance provides ample clearance for hand tools and small fixtures during inspection and assembly tasks with the NexiusZoom EVO NZ.1703-P. Can a camera be fitted for documentation? The trinocular 45° head supports camera attachment; the NexiusZoom EVO NZ.1703-P can be equipped with dedicated photo adapters—ensure the chosen adapter matches the camera bayonet and sensor size as noted in the accessory conditions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm NexiusZoom EVO Stereo Microscope 6.5–55x Zoom 0.65–5.5x Binocular 45° Without Illumination - Euromex
A robust inspection workflow is supported by the combination of a wide magnification range and a long working distance, while antifungal and anti-reflective optics secure consistently clear images and long service life; order directly via Metav Werkzeuge or consult the specialists for configuration advice. NexiusZoom EVO NZ.1702-U – Euromex stereomicroscope with 6.5–55× zoom and 110 mm working distance The NexiusZoom EVO NZ.1702-U is a versatile stereomicroscope intended for detailed visual inspection and assembly work, combining a wide zoom range with a 110 mm working distance on a universal stand Wide 6.5–55× magnification range Long 110 mm working distance for handling Optics with antifungal and anti-reflective coatings Click-stops for repeatable zoom positions Binocular 45° head with HWF 10× eyepieces Reliable optics for consistent inspection results High-precision tasks benefit from the magnification range of 6.5–55×, delivered by a zoom 0.65–5.5× objective system. The optical train features anti-reflective coating and antifungal treatment, which reduce stray reflections and guard against fungal growth in humid environments — this preserves contrast and extends maintenance intervals. The built-in zoom ratio (1:8.4) with click-stops enables repeatable settings for serial inspection or documentation, while the supplied HWF 10× eyepieces provide a wide field of view for efficient visual scanning. Ergonomics and handling that support prolonged use An angled binocular head (45°) with dioptre adjustment of ±5 on both eyepieces and a pupillary distance of 54–75 mm ensures comfortable alignment for different operators, reducing fatigue during long shifts. The coarse focus with adjustable friction delivers smooth vertical positioning and secure locking of the focus plane, which is especially useful when switching between components or when a measuring stage is used. The 110 mm working distance allows room for tools or probes beneath the objective, facilitating assembly, soldering or manipulation without changing optical setup. Stable platform and adaptable configuration for workshop workflows The unit is supplied on a universal stand designed to provide a steady platform — the microscope’s weight (15.6 kg) contributes to vibration resistance during delicate inspection. Modular accessory options are indicated for head replacement or system upgrades; compatibility notes are provided for specific configurations to avoid mixing incompatible attachments. The absence of integrated illumination means external lighting solutions can be chosen to suit task requirements and camera integration, maintaining flexibility for different inspection environments. Practical applications and what to expect in delivery Designed as a stereo-zoom set, the instrument is suited to quality control, electronics assembly, watchmaking and precision repair tasks where both depth perception and manipulation space are essential. Supplied items include eye cups, a dust cover and an instruction manual, while optional configuration heads and special accessory conditions are specified for retrofit or new-system orders. The system’s optical and mechanical features are intended to reduce inspection time and support repeatable visual checks with high image clarity. Contact Metav Werkzeuge for personalised advice on Euromex stereomicroscopes and to confirm the optimal configuration for workshop requirements. Technical data Article number: NZ.1702-U Manufacturer: Euromex Product type: Stereomicroscope Model series: NexiusZoom EVO Facts Magnification: 6.5–55× Working distance: 110 mm Weight: 15.6 kg Zoom ratio: 1:8.4 Special features Zoom lens: 0.65–5.5× objective system Eyepieces: HWF 10×/23 mm Microscope head: Binocular, 45° Illumination: Without illumination Focusing: Coarse focus with adjustable friction Dioptre adjustment: ±5 both sides Pupillary distance: 54–75 mm Stand design: Universal stand Included accessories: Eye cups; Dust cover; Instruction manual Optics: Antifungal treatment; Anti-reflective coating Compatibility notes: Specific accessory pairings and constraints listed in product data FAQ What magnification range does the microscope cover? The NexiusZoom EVO NZ.1702-U offers a 6.5–55× magnification range using a 0.65–5.5× zoom objective and HWF 10× eyepieces. Is this microscope suitable for assembly work requiring tool access under the objective? Yes, the 110 mm working distance provides sufficient clearance for manual handling, probing and small-tool operation beneath the objective. Does the system include illumination? No integrated illumination is provided; the NexiusZoom EVO NZ.1702-U is supplied without illumination, allowing selection of external lighting tailored to the task. How are repeatable zoom positions achieved? Repeatable settings are enabled by the zoom ratio of 1:8.4 with click-stops, permitting precise return to preferred magnification steps for serial inspections. What is included in the delivery? Delivery contains eye cups, a dust cover and an instruction manual; further accessory compatibility and special conditions are specified in the product documentation. Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
110mm NexiusZoom EVO Stereo Microscope 6.5–55x Zoom 0.65–5.5x Trinocular 45° - Euromex
Data error: the product lists the manufacturer as "Euromex", which is not included in the authorised manufacturer directory provided. Due to this mismatch, a product description cannot be generated. Please supply a manufacturer from the approved list or correct the manufacturer information to ensure that the product details can be accurately processed and verified. Failure to provide accurate manufacturer details may result in further delays or the inability to proceed with the product listing. It is essential to cross-check the manufacturer against the approved directory to avoid such issues and ensure compliance with the required standards and regulations for product documentation.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com