123 x 119 mm Digital Microscope EcoBlue EC.1607 Dual NeoLED, 5 MP 2560 x 1920 CMOS - Euromex
Combined 5 MP imaging, achromatic objectives and Dual NeoLED lighting enable precise inspection and consistent documentation while remaining simple to integrate into existing workflows. Order the EcoBlue EC.1607 directly via Metav Werkzeuge or ask our consultants if needed. EcoBlue EC.1607 digital microscope — 5 MP camera, Dual NeoLED illumination EcoBlue EC.1607 is a compact upright digital microscope designed for high‑quality visual inspection and documentation in workshop and laboratory environments 5 MP sensor, 2560 x 1920 pixels Dual NeoLED illumination Achromatic objectives 4x/10x/S40x/S60x Binocular head with USB 2.0 output Reliable high‑resolution imaging for routine inspection and documentation The imaging system is built around a 5 MP sensor with a native 2560 x 1920 pixel array and a CMOS 1/2.8 inch detector, delivering detailed stills and clear live views at up to 30 fps under suitable conditions. This combination supports fast visual checks and traceable documentation, reducing rework and inspection time. The technical design promotes consistent results when capturing features, edges or surface structures, and the 24 bit colour reproduction helps to preserve true colour information for reporting and quality control. Optics and lighting that improve measurement reliability A turret with achromatic objectives (4x, 10x, S40x, S60x) provides corrected optics for reduced chromatic aberration and sharper detail across magnifications. The integrated Dual NeoLED system offers uniform, shadow‑reduced illumination suited to both reflective and matte specimens; brightness and spectral balance are optimised for faithful colour rendering. By combining corrected optics with stable lighting, the instrument reduces measurement uncertainty and simplifies image interpretation for metallographic checks, PCB inspection or material surface analysis. Practical ergonomics and simple integration into workflows The upright instrument uses a binocular head with eyepieces (10x/18 mm) and an objective revolver with four positions for rapid magnification changes during inspection sequences. The 123 x 119 mm stage gives a stable working area for small assemblies and samples. Connectivity is handled via USB 2.0, enabling straightforward capture to standard PCs and compatibility with common imaging workflows. The camera connection and ergonomic layout support efficient throughput on the workbench and minimise setup time during routine examinations. Software support and included accessories for traceable results Delivered with ImageFocus Plus software, the system supports image capture, basic measurement and annotation to document findings. Supplied accessories include a USB‑2.0 cable and a calibration slide 1 mm/100, enabling on‑site calibration and immediate verification of measurement accuracy. The objective turret and eyepiece combination, together with the software and calibration slide, form a coherent measurement chain that helps maintain quality standards and provides clear audit trails for process documentation. For high‑quality digital imaging from a trusted line, request purchase details or technical guidance from Metav Werkzeuge — direct assistance and product supply are available via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: EC.1607 SKU: EC.1607 Brand: Euromex Product type: Digital microscope Core specifications Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8 inch Frame rate: max. 30 fps Stage size: 123 x 119 mm Colour depth: 24 bit colour Features and accessories Dual NeoLED illumination Achromatic objectives 4x / 10x / S40x / S60x Binocular microscope head USB 2.0 connection Software: ImageFocus Plus Included: USB‑2.0 cable; calibration slide 1 mm/100 Objective revolver with four positions Eyepieces: 10x/18 mm FAQ What resolution and frame rate does the system provide? The EcoBlue EC.1607 offers a 5 MP camera with 2560 x 1920 pixels and can deliver live images at up to 30 fps under optimal conditions. Which illumination is integrated and why does it matter? The instrument uses Dual NeoLED lighting to ensure even, low‑glare illumination; this improves contrast and colour fidelity for reliable visual inspection with the Ecoblue EC.1607. Are magnifications interchangeable for different inspection tasks? Yes, the achromatic objective set (4x, 10x, S40x, S60x) on the objective revolver allows quick changes in magnification and reduced chromatic aberration for clearer detail. What software and accessories are supplied for measurement? The package includes ImageFocus Plus for capture and annotation, a USB‑2.0 cable for PC connection and a calibration slide 1 mm/100 for traceable measurements with the digital microscope. Is the connection compatible with standard PCs? The camera interface is USB 2.0, enabling plug‑and‑play style transfer to most laboratory and workshop PCs without specialised hardware. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
355 x 270 x 220 mm Digital Microscope EcoBlue EC.1005 5 MP 2560x1920 Dual LED USB 2.0 - Euromex
Take advantage of high-resolution imaging and reliable illumination combined with compact workshop handling for consistent inspection results; order the microscope directly via Metav Werkzeuge or contact their consultants for application advice. EcoBlue EC.1005 digital microscope — 5 MP camera, Dual LED (Euromex) The EcoBlue EC.1005 is a compact digital upright microscope designed for routine inspection, documentation and simple measurement tasks in laboratories and workshops. 5 MP CMOS sensor, 2560 x 1920 pixels Dual LED illumination for even lighting Achromatic objectives 4x / 10x / S40x Includes ImageFocus Plus and calibration slide Precision imaging for repeatable documentation The system is built around a 5 MP CMOS 1/2.8" sensor delivering 2560 x 1920 pixel images at up to 30 fps, which enables sharp stills and smooth live viewing for quality-control workflows. High pixel count and sensor sensitivity permit clear detail capture even at moderate magnifications; image sequences can be recorded and annotated in the bundled ImageFocus Plus software. The 24‑bit colour output supports faithful colour reproduction, which is beneficial when visual assessment or colour-coded inspection criteria are required. Reliable optics and illumination for accurate results Optical consistency is provided by the set of achromatic objectives 4x / 10x / S40x, which are designed to minimise chromatic aberration and maintain edge sharpness across the field. Combined with Dual LED lighting, specimens are illuminated evenly to reduce shadows and improve contrast without heat build-up. The camera interface via USB 2.0 ensures straightforward connectivity to standard PCs or laptops for immediate capture and documentation, making the system suitable for tasks where reproducible images are critical to traceability. Compact footprint and calibration for workshop use The instrument offers a practical 123 x 119 mm stage within a compact housing of 355 x 270 x 220 mm (H x W x D) and a transport weight of 2.6 kg, which supports flexible placement even on small benches. The monocular head and objective turret with four positions simplify routine magnification changes, while the included USB‑2.0 cable and calibration slide (1 mm/100) facilitate measurement-ready use from the outset. Calibrated captures enable documented comparisons over time, and the modest footprint combined with robust illumination makes the microscope well suited for production sampling and educational settings where dependable results and economical operation are priorities. For reliable digital inspection and measurement-ready imaging, contact Metav Werkzeuge in Emmerich for tailored advice and ordering: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: EC.1005 Brand: Euromex Type: Digital microscope Series: EcoBlue SKU: EC.1005 Facts Resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8" Frame rate: max. 30 fps Stage size: 123 x 119 mm Dimensions: 355 x 270 x 220 mm (H x W x D) Weight: 2.6 kg Special features Dual LED illumination Achromatic objectives 4x / 10x / S40x Monocular head ImageFocus Plus software 24‑bit colour camera Included: USB‑2.0 cable; calibration slide 1 mm/100 FAQ What image quality can be expected from this digital microscope? The EcoBlue EC.1005 features a 5 MP sensor and records at 2560 x 1920 pixels, delivering high-detail stills and live images suitable for documentation and basic measurement tasks. Are measurement functions available with the included software? Yes, the bundled ImageFocus Plus software supports image capture and measurement workflows when used with the EC.1005 and the supplied calibration slide. Which magnifications are provided by the objective set? The optical turret includes achromatic objectives 4x, 10x and S40x, offering a practical range for inspection and sample classification. Is the system ready for immediate use out of the box? The EC.1005 is supplied with a USB‑2.0 cable and a calibration slide (1 mm/100), allowing immediate connection to a PC and calibrated image capture for traceable results. Manufacturer: Euromex Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
355 x 270 x 220 mm Digital Microscope EcoBlue EC.1105 Dual LED, 5 MP CMOS 2560 x 1920, USB 2.0 - Euromex
Take advantage of the combination of high-resolution imaging, versatile achromatic optics and simple connectivity to streamline inspection workflows; order the device directly via Metav Werkzeuge or consult our specialists for tailored advice. EcoBlue EC.1105 digital microscope — 5 MP CMOS, Dual LED (Euromex) The EcoBlue EC.1105 is a compact upright digital microscope for documentation, quality control and teaching applications in laboratory and workshop environments 5 MP sensor, 2560 x 1920 pixels Dual LED illumination for even lighting Achromatic objectives 4x / 10x / S40x / S100x Includes ImageFocus Plus software and USB cable Pin-sharp imaging for precise inspection The unit delivers 5 MP images at 2560 x 1920 pixels using a CMOS 1/2.8 inch sensor, which provides crisp detail for measurement and defect detection. A maximum frame rate of 30 fps facilitates smooth live observation and reduces motion blur during positioning; note that frame rates are achievable under optimal conditions as stated by the manufacturer. The integrated 24-bit colour capture preserves natural colour rendition, so documentation and analysis remain reliable across repeat inspections. Optics and stage that speed up measurement A four-position objective turret fitted with achromatic objectives (4x / 10x / S40x / S100x) reduces chromatic aberration and yields sharper, higher-contrast images compared with simple magnifiers. The monocular head combined with a 10x / 18 mm eyepiece supports conventional observation, while the 123 x 119 mm stage gives stable sample positioning for routine checks. A supplied calibration slide (1 mm / 100 divisions) enables traceable measurements when paired with the included software, so measurement results can be reproduced and documented consistently. Engineered for day-to-day laboratory and workshop use At 355 x 270 x 220 mm and weighing 2.6 kg, the instrument occupies a modest footprint and can be integrated into bench-top inspection stations without extensive reorganisation. The Dual LED illumination system provides uniform light with low heat output, making it suitable for extended sessions and sensitive samples. Robust construction and straightforward controls mean the device supports frequent use in education, quality assurance and light industrial inspection, improving throughput without adding complexity. Capture, analyse and report with minimal delay Connectivity via USB 2.0 and the bundled ImageFocus Plus software create a direct path from observation to digital records: capture stills, record video and apply basic measurement tools within the application. The camera’s colour depth and software support accelerate documentation and reduce post-processing time, improving operational efficiency. Compatibility with the Euromex accessory list ensures the system can be extended for specialised tasks; consult the accessory notes for suitable additions and any constraints. For tailored advice on integrating the EcoBlue EC.1105 into production or education workflows, contact Metav Werkzeuge for a detailed consultation and purchase support — call +49 2822 7131930 or email info@metav-werkzeuge.com to discuss specifications and availability. Technical Data Article number: EC.1105 SKU: EC.1105 Label: EcoBlue EC.1105 Brand: Euromex Product type: Digital microscope Model series: EcoBlue Facts Dimensions: 355 x 270 x 220 mm (H x W x D) Weight: 2.6 kg Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Frame rate: max. 30 fps Sensor: CMOS 1/2.8 inch Stage size: 123 x 119 mm Special features Illumination: Dual LED Objectives: Achromatic objectives 4x / 10x / S40x / S100x Microscope head: Monocular Eyepiece: 10x / 18 mm Camera: 24-bit colour Software: ImageFocus Plus Connection: USB 2.0 Accessories included: USB-2.0 cable; calibration slide 1 mm/100 Compatible accessories: see Euromex digital model family list (AE.5130, AE.5025, AE.5040, PB.5155, PB.5165, PB.5168, PB.5245, PB.5255, PB.5274, PB.5275) FAQ What imaging performance can be expected from this digital microscope? The EcoBlue EC.1105 provides 5 MP images at 2560 x 1920 pixels with a CMOS 1/2.8 inch sensor; this delivers accurate detail for inspection and measurement tasks. Is the microscope suitable for routine measurement work? Yes. The combination of achromatic objectives, a 123 x 119 mm stage and the supplied calibration slide enables reproducible measurements when used with ImageFocus Plus. Which illumination is used and why does it matter? Dual LED illumination ensures even lighting with low heat output, which reduces glare and preserves sample integrity during extended observation sessions. How are images transferred and recorded? Image capture and transfer are handled via USB 2.0; ImageFocus Plus software is included for stills, video capture and basic measurement functions. Are additional accessories available for specific applications? Compatible accessories are listed for the Euromex digital model family (see AE.5130, AE.5025, AE.5040 and PB-series codes); check the accessory list for applicability and restrictions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
409 x 195 x 235 mm Digital Microscope 5 MP, 2592 x 1944 Pixels, NeoLED Köhler Illumination - Euromex
Take advantage of high-resolution imaging and reliable optical design for accurate routine inspections; order the Euromex bScope BS.1157-PLi directly via Metav Werkzeuge or consult our specialists for tailored advice. bScope BS.1157-PLi — Digital upright microscope with 5 MP imaging and Plan IOS objectives bScope BS.1157-PLi combines high-resolution digital capture with an ergonomic binocular head for laboratory and quality-control applications 5 MP sensor, 2592 x 1944 pixel resolution NeoLED Köhler transmitted illumination Plan IOS objectives up to S100x oil Binocular head with dioptre adjustment High-resolution imaging that speeds up inspection The 5 MP sensor with a pixel resolution of 2592 x 1944 delivers detailed images suitable for documentation and measurement tasks. A CMOS 1/2.5 inch sensor provides a good balance between sensitivity and noise, producing usable frames at 7 fps at full resolution and up to 27 fps at 1280 x 960 for smoother live observation. These figures translate into faster defect recognition and fewer repeat captures during routine examinations, so inspection throughput improves without sacrificing image fidelity. Optics and illumination that ensure consistent visual results Optical performance is driven by the Plan IOS objective set (4x, 10x, S40x, S100x oil) together with NeoLED transmitted Köhler illumination, which produces even, controllable lighting across the field of view. The binocular head with HWF 10x/20 mm eyepieces and five-position revolving nosepiece enables rapid magnification changes while maintaining flat-field correction. The combined effect is reliable contrast, accurate colour rendition and reduced operator fatigue during extended use. Practical connectivity and workflow integration Data transfer is handled via USB 2.0, allowing straightforward connection to a PC for image capture with ImageFocus Alpha software. The system’s dynamic range (76 dB), signal-to-noise ratio (41 dB) and 24-bit colour depth support precise visual assessment and archived documentation. Supplied accessories include a USB-2.0 cable and a calibration slide (1 mm/100) to facilitate measurement tasks. With compact dimensions (409 x 195 x 235 mm) and a weight of 7.1 kg, the instrument fits most bench environments while remaining stable for repeatable inspections. Contact Metav Werkzeuge for a technical consultation on the Euromex bScope BS.1157-PLi and to request detailed specifications or a tailored quotation; Metav Werkzeuge provides direct support from Emmerich for European workshops and laboratories. Technical Data Article number: BS.1157-PLi Manufacturer: Euromex Model series: bScope Product type: Digital microscope Label: bScope BS.1157-PLi SKU: BS.1157-PLi Core specifications Dimensions: 409 x 195 x 235 mm (H x W x D) Weight: 7.1 kg Sensor: CMOS 1/2.5 inch Resolution: 2592 x 1944 pixels Resolution (MP): 5 MP Frame rate: 7 fps at 2592 x 1944; 27 fps at 1280 x 960 Dynamic range: 76 dB Signal-to-noise ratio: 41 dB Colour depth: 24 bit Features & Accessories Illumination: NeoLED transmitted, Köhler Objectives: Plan IOS 4x / 10x / S40x / S100x oil Microscope head: Binocular Eyepieces: HWF 10x / 20 mm Revolving nosepiece: five-position Software: ImageFocus Alpha Included: USB-2.0 cable; calibration slide 1 mm/100 Power option: optional three rechargeable AA batteries FAQ What image resolution can be expected from the microscope? The Euromex bScope BS.1157-PLi records images at up to 2592 x 1944 pixels (5 MP), suitable for detailed inspection and documentation. Which objectives are included and is oil immersion supported? The system uses Plan IOS objectives (4x, 10x, S40x and S100x oil); the S100x objective supports oil immersion for high‑magnification work. How is illumination provided and why is Köhler important? Illumination is delivered by NeoLED transmitted Köhler light, which provides uniform field brightness and improved contrast, making structure and defects easier to evaluate. Can the camera stream live video for analysis or recording? Yes, the integrated camera supports live streaming at 7 fps at full resolution and 27 fps at reduced resolution, enabling smoother live observation and video capture. Is there software for image capture and measurement? The microscope is supplied with ImageFocus Alpha software for image capture, basic measurement and documentation tasks. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Binocular Dual NeoLED, 2560 x 1920 USB 2.0 - Euromex
Benefit from high-resolution 5 MP imaging, uniform Dual NeoLED illumination and a precision integrated mechanical X‑Y stage for consistent inspection and documentation; order the EcoBlue EC.1157 directly via Metav Werkzeuge or consult our experts for application advice. EcoBlue EC.1157 Digital microscope — 5 MP camera, Dual NeoLED (Euromex) The EcoBlue EC.1157 is a compact digital microscope designed for routine inspection and documentation in laboratories and workshop environments, combining a 5 MP CMOS sensor with achromatic optics and an integrated mechanical X‑Y stage. High-resolution 5 MP sensor Uniform Dual NeoLED illumination Binocular head with achromatic optics Integrated 123 x 119 mm X‑Y stage Reproducible imaging for inspection and quality control The instrument delivers 5 MP images at 2560 x 1920 pixels via a CMOS 1/2.8 inch sensor, enabling clear visualisation of fine details and surface structures. With a maximum 30 fps frame rate under optimal conditions, the system supports live observation and rapid alignment; the stated frame rates apply under the manufacturer's specified conditions. The achromatic objective set (4×, 10×, S40×, S100×) and a four‑position turret allow flexible magnification steps while maintaining colour-corrected images, which aids repeatable measurements and visual comparisons across batches. This combination of sensor resolution and optical correction reduces the need for repeated captures, supporting efficient quality-control workflows. Smooth handling and precise sample positioning Ergonomics and workflow integration are supported by the binocular head, a mechanically robust integrated X‑Y stage (123 x 119 mm) and a fixed objective turret that speeds up routine tasks. The mechanical stage permits controlled lateral movement for systematic scanning and documentation of larger samples without repositioning, which improves throughput and minimises positional errors. Connectivity via USB 2.0 simplifies attachment to standard workstations; the package includes a USB‑2.0 cable and a calibration slide (1 mm/100) to support immediate setup and traceable measurements. Clear documentation and software-assisted analysis Colour-accurate captures are provided in 24 bit colour and are processed using ImageFocus Plus software, enabling measurement, annotation and basic image enhancement. The software enables the creation of standardised image records and supports export for reports, ensuring inspection results are easy to archive and share with colleagues or customers. For applications that require objective comparison, the supplied calibration slide supports scale verification, helping to ensure measurement reliability in routine documentation and audit scenarios. Practical illumination and optics for a wide range of samples The Dual NeoLED illumination system provides stable, LED‑based lighting with low heat output, suitable for thermally sensitive specimens and extended observation times. The achromatic objectives ensure that colour fringing is minimised across magnifications, which is particularly beneficial when assessing coatings, solder joints or material microstructures. The optical and lighting combination reduces artefacts and supports consistent image quality, making the instrument well suited for education, electronics inspection and general workshop metrology. For tailored advice on integrating the Euromex EcoBlue EC.1157 into production or laboratory processes, contact Metav Werkzeuge for technical consultation and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical Data Article number: EC.1157 SKU: EC.1157 Brand: Euromex Model series: EcoBlue Product type: Digital microscope Core specifications Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2,8 inch Frame rate: max. 30 fps Stage size: 123 x 119 mm Features & Accessories Illumination: Dual NeoLED Objectives: Achromatic 4x / 10x / S40x / S100x Head: Binocular Stage: integrated mechanical X‑Y stage Interface: USB 2.0 Software: ImageFocus Plus Included: USB-2.0 cable; calibration slide 1 mm/100 Camera colour depth: 24 bit FAQ What resolution and sensor does the microscope use? The EcoBlue EC.1157 is equipped with a 5 MP camera delivering 2560 x 1920 pixel images on a CMOS 1/2.8 inch sensor. Is the included lighting suitable for sensitive samples? Yes, the Dual NeoLED illumination provides stable, low‑heat lighting suitable for thermally sensitive specimens and prolonged observation. Which magnifications are available with the supplied optics? Achromatic objectives in the set include 4×, 10×, S40× and S100× on a four‑position turret for flexible magnification steps. Can images be measured and annotated? ImageFocus Plus software, supplied with the system, enables measurement, annotation and export for documentation and reporting. What accessories are supplied for calibration and connectivity? The delivery includes a USB‑2.0 cable and a calibration slide (1 mm/100) for verification and immediate connection to a workstation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope EcoBlue EC.1155 Dual LED, 2560 x 1920 CMOS - Euromex
The combination of high-resolution imaging and a stable mechanical X‑Y stage ensures reliable documentation and consistent inspection results for routine laboratory and quality‑control tasks; benefit from the 5 MP sensor and Dual LED lighting for clear, reproducible images. Order the device directly via Metav Werkzeuge or consult our technical advisers for configuration and accessories. EcoBlue EC.1155 Digital microscope — 5 MP camera, Dual LED illumination (Euromex) EcoBlue EC.1155 is a compact upright digital microscope designed for consistent documentation and routine inspection in education, quality control and laboratory environments. 5 MP CMOS sensor, 2560 x 1920 pixels Dual LED illumination for uniform lighting Achromatic objectives 4x / 10x / S40x / S100x Integrated mechanical X‑Y stage 123 x 119 mm Consistent, high‑resolution imaging for documentation and analysis The EcoBlue EC.1155 combines a 5 MP camera with a CMOS 1/2.8" sensor and a native pixel resolution of 2560 x 1920, delivering detailed images suitable for reporting and archival. With a maximum of 30 fps under optimal conditions, the digital camera supports smooth live viewing and quick capture workflows; image files are produced in 24‑bit colour, which preserves colour fidelity for inspection tasks. The USB connection is standard USB 2.0, enabling simple integration with a workstation. The included ImageFocus Plus software facilitates capture, basic measurement and annotation, turning visual inspection into reliable, traceable documentation. Precise optics and a practical stage for repeatable measurements Optical quality and stable sample handling are central to reproducible results: an objective turret with four positions accepts achromatic objectives at 4x, 10x, 40x and 100x, while the monocular head and supplied eyepiece provide a conventional observation option. The integrated mechanical X‑Y stage with dimensions 123 x 119 mm enables systematic sample scanning and accurate relocation of features between captures. This arrangement reduces repositioning time and supports tasks where repeat measurements or comparative imaging are required, such as material inspection or classroom demonstrations. Simple setup, reliable illumination and ready‑to‑use accessories Workflows are simplified by the Dual LED illumination system, which offers even, adjustable lighting for reflective and translucent samples without the need for external light sources. The microscope is supplied with a USB‑2.0 cable and a calibration slide (1 mm/100) for basic scale verification. Note that quoted frame rates apply under optimal conditions as specified by the manufacturer. The system is suitable for routine laboratory work, educational use and standard quality‑control inspections; for bespoke applications or additional accessories consult the accessory list referenced by Euromex. If unsure whether this model fits specific requirements or further technical data are needed, technical advice is available by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930. For reliable image documentation and purchasing advice on the Euromex EcoBlue EC.1155, contact Metav Werkzeuge for personalised consultation and order support at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: EC.1155 SKU: EC.1155 Brand: Euromex Product type: Digital microscope Model series: EcoBlue Connection: USB 2.0 Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2,8 inch Frame rate: max. 30 fps Illumination: Dual LED Objective system: Achromatic objectives 4x / 10x / S40x / S100x Stage: 123 x 119 mm; integrated mechanical X‑Y stage Head: Monocular Software: ImageFocus Plus Accessories included: USB‑2.0 cable; calibration slide 1 mm/100 Facts Resolution: 5 MP Pixel count: 2560 x 1920 Sensor size: 1/2.8 inch Maximum frame rate: 30 fps Stage dimensions: 123 x 119 mm Objective positions: 4 Special features Dual LED illumination Achromatic objective set 4x / 10x / S40x / S100x Monocular head with 10x / 18 mm eyepiece Objective revolver with four positions Integrated mechanical X‑Y stage 24‑bit colour camera output ImageFocus Plus software compatibility USB 2.0 interface Included calibration slide 1 mm/100 FAQ What image quality can be expected from this digital microscope? The EcoBlue EC.1155 digital microscope from Euromex delivers images with a 5 MP sensor at 2560 x 1920 pixels and 24‑bit colour depth, offering clear detail for documentation and basic measurements. Is the illumination suitable for different sample types? Yes, the Dual LED illumination provides uniform lighting suitable for both opaque and translucent samples and helps to reduce shadows and reflections during documentation with the Euromex EcoBlue EC.1155. Does the system include software for capture and measurement? The unit is supplied with compatibility for ImageFocus Plus, which allows image capture, annotation and simple measurements for inspection workflows. What accessories are supplied with the microscope? Included items are a USB‑2.0 cable and a calibration slide (1 mm/100); additional accessories and specific add‑ons are listed on the Euromex accessory references for the digital model family. For which applications is this microscope intended? The EcoBlue EC.1155 (Euromex, SKU EC.1155) is designed for education, routine laboratory work and quality‑control inspections where reliable documentation and straightforward operation are priorities. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Monocular Semi‑Plan Lenses 2560 x 1920, 1 W LED, USB 2.0 - Euromex
Take advantage of high‑resolution imaging, a compact digital workflow and a stable mechanical stage to speed routine inspection and documentation — order the BioBlue BB.4245 via Metav Werkzeuge or request technical advice from the Metav consultants. BioBlue BB.4245 — Euromex digital microscope with 5 MP camera and integrated X‑Y stage The BioBlue BB.4245 is a digital upright microscope designed for laboratory inspection and routine documentation, combining a high‑resolution CMOS camera with a semi‑plan objective set for clear, reproducible imaging. 5 MP sensor for detailed captures Semi‑Plan optics for flat field imaging Integrated mechanical X‑Y stage for repeatability USB 2.0 interface for simple data transfer Precise imaging that makes inspection faster and more reliable The built‑in 5 MP camera delivers a native pixel output of 2560 x 1920, supported by a CMOS 1/2.8" sensor; this combination produces sharp stills suitable for documentation and basic measurement tasks. The listed frame capability of 30 fps allows smooth live viewing under normal lighting, while 24‑bit colour rendering preserves colour fidelity for visual assessment. For laboratories where consistent image quality and repeatable results are essential, the optical‑sensor pairing reduces the need for post‑capture correction and streamlines the inspection workflow. Versatile optics for a range of sample types A set of Semi‑Plan objectives (4x, 10x, S40x, S60x) covers both low‑magnification overview and higher‑magnification detail without frequent objective swaps. Semi‑plan optics correct field curvature to deliver an even image across the field of view, which is especially helpful when inspecting flat specimens or small assemblies. The optical selection supports both coarse visual inspection and more detailed surface analysis, while objective labelling and magnification steps simplify method planning for routine tasks. Stable sample handling that improves throughput Samples are positioned on an integrated mechanical X‑Y stage, enabling controlled lateral movement and precise repositioning between captures. This mechanical table reduces manual repositioning time and supports consistent imaging of multiple points on the specimen. The monocular head and compact design, with a stated mass of 3.4 kg, combine to create a stable yet mobile inspection station that fits within constrained bench spaces without sacrificing mechanical robustness. Digital workflow and software compatibility to save time Image capture is facilitated via USB 2.0, providing reliable connectivity to a PC. Included software ImageFocus Plus supports capture, basic measurement and image management functions, reducing setup time for digital documentation. The camera’s sensor and software integration mean images can be archived, annotated and exported in common formats, enabling traceable records and straightforward inclusion in quality reports. For facilities standardising digital records, this configuration supports an efficient documentation pipeline. Illumination and accessories that support reproducible results The microscope’s 1 W LED illumination provides stable, long‑life lighting for transmitted or reflected applications depending on the configured stand and accessories. A list of compatible accessories is maintained by the manufacturer and includes several dedicated items (AE.5130, AE.5025, AE.5040, PB.5155, PB.5165, PB.5168, PB.5245, PB.5255, PB.5274, PB.5275) — these are specified on the Euromex accessory list and should be checked for compatibility and restrictions before ordering. The documented accessory ecosystem simplifies station configuration for specific inspection tasks while ensuring optical and mechanical compatibility. Contact Metav Werkzeuge for a tailored quotation, accessory recommendations or technical clarification on the BioBlue BB.4245 (SKU: BB.4245) via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BB.4245 SKU: BB.4245 Manufacturer: Euromex Product type: Digital microscope Model series: BioBlue Facts Resolution: 5 MP (2560 x 1920) Sensor: CMOS 1/2.8" Frame rate: max. 30 fps Illumination: 1 W LED Weight: 3.4 kg Interface: USB 2.0 Special features Lens system: Semi‑Plan 4x / 10x / S40x / S60x Stage: Integrated mechanical X‑Y stage Head: Monocular Software: ImageFocus Plus Camera: 24‑bit colour Accessories: AE.5130; AE.5025; AE.5040; PB.5155; PB.5165; PB.5168; PB.5245; PB.5255; PB.5274; PB.5275 FAQ What resolution and sensor type does the camera use? The camera offers 5 MP resolution at 2560 x 1920 pixels and uses a CMOS 1/2.8" sensor for good sensitivity and colour reproduction in the BioBlue BB.4245 digital microscope. Which objectives are included and what do they provide? The optical set includes Semi‑Plan 4x / 10x / S40x / S60x objectives, delivering a flat field for accurate visual inspection and allowing both overview and detailed observation without excessive objective changes. Is there software for image capture and measurement? Yes. The system is supplied with ImageFocus Plus, which supports capture, basic measurements and image management for documentation tasks. Can the stage be used for repeatable multi‑point inspection? The integrated mechanical X‑Y stage enables controlled lateral positioning and repeatable relocation of points of interest across a specimen. What connectivity is available for image transfer? Image transfer and live view are provided via USB 2.0, allowing direct connection to a PC running the supplied software. Manufacturer: Euromex; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Semi-Plan 4x/10x/S40x 2560 x 1920, USB 2.0 - Euromex
Take advantage of the combination of high-resolution imaging, a precise mechanical X–Y stage and integrated LED illumination for dependable laboratory or inspection workflows; order the equipment via Metav Werkzeuge or consult our technical advisors for tailored guidance. BioBlue BB.4225 digital microscope — 5 MP camera, Semi‑Plan objectives by Euromex The BioBlue BB.4225 is a digital upright microscope designed for laboratory imaging, quality control and educational use, combining a high-resolution camera with a mechanical X–Y stage for repeatable sample positioning. 5 MP camera, 2560 x 1920 pixel resolution Semi‑Plan objective set 4x / 10x / S40x Integrated mechanical X‑Y stage 1 W LED illumination and 24‑bit colour depth Enhanced detail for reliable documentation The digital imaging system centres on a 5 MP sensor delivering 2560 x 1920 pixels, driven by a CMOS 1/2.8 inch sensor that captures clear images at up to 30 fps under optimal conditions. This combination reduces image noise and improves detail recognition, which is particularly useful for material inspection, biological samples and component analysis. The high pixel count ensures measurements and annotations are based on sharp, verifiable visual data, supporting traceable documentation in laboratory protocols. Consistent sample handling for repeatable results A built‑in mechanical X‑Y stage enables precise, incremental sample movement and repeatable positioning across inspection cycles. The robust stage supports comparative imaging, stitch captures and systematic scanning without the need for external fixtures. For users performing dimensional checks or serial inspections, the integrated stage minimises repositioning error and streamlines workflow, ensuring comparable results between operators and over time. Optical quality and stable illumination for true colour rendering Optical performance is provided by Semi‑Plan objectives (4x / 10x / S40x) that deliver flat-field images with minimal peripheral distortion, supporting accurate visual assessment across the field of view. Paired with a 1 W LED light source, the system offers uniform, long‑life illumination that maintains colour constancy and reduces thermal effects on sensitive specimens. The monocular configuration and lightweight design contribute to focused, ergonomic use in bench and classroom environments. Seamless capture and analysis for efficient reporting Data transfer and image control are facilitated via USB 2.0, while the included ImageFocus Plus software enables capture, measurement and basic image processing without complex integration. The camera provides 24‑bit colour output, making it straightforward to export images for reports or to feed inspection databases. This combination of hardware and software supports quick onboarding for technicians and simplifies the handover from capture to results, reducing time-to-report in routine quality checks. For tailored advice on integrating the Euromex digital microscope into existing workflows, contact Metav Werkzeuge in Emmerich for product consultancy and delivery options at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: BB.4225 SKU: BB.4225 Manufacturer: Euromex Product type: Digital microscope Model series: BioBlue Label: BioBlue BB.4225 Facts Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8 inch Frame rate: max. 30 fps Illumination: 1 W LED Weight: 3.4 kg Special features Semi‑Plan objectives 4x / 10x / S40x Integrated mechanical X‑Y stage Monocular head Software: ImageFocus Plus Connection: USB 2.0 24‑bit colour camera Accessories listed on Euromex digital family accessory list (AE.5130, AE.5025, AE.5040, PB.5155, PB.5165, PB.5168, PB.5245, PB.5255, PB.5274, PB.5275) FAQ What imaging performance can be expected from the BioBlue BB.4225? The BioBlue BB.4225 delivers 5 MP stills at 2560 x 1920 pixels and can record at up to 30 fps under optimal conditions, providing detailed images suitable for inspection and documentation. Is the microscope suitable for repeated comparative inspections? Yes, the integrated mechanical X‑Y stage supports precise repositioning for repeatable comparative imaging, which is ideal for serial inspection and quality control processes. Which objectives are supplied and what benefit do they offer? The microscope includes Semi‑Plan objectives (4x, 10x and S40x) that provide a flat field and reduced edge distortion, improving visual assessment across the entire field of view. Can images be exported for reporting and analysis? Images from the BioBlue BB.4225 can be transferred via USB 2.0 and managed with ImageFocus Plus, enabling measurement, basic processing and export for reporting workflows. Is the illumination adequate for sensitive samples and long sessions? The system uses a 1 W LED light source which offers consistent, low‑heat illumination and reliable colour rendering for extended observation and documentation sessions. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Semi-Plan Lenses NeoLED Illumination, CMOS 2560 x 1920 USB - Euromex
Benefit from precise documentation and a reliable workflow: the 5 MP sensor with 2560 x 1920 pixel resolution, combined with NeoLED illumination and an integrated mechanical X‑Y stage, delivers consistent images and accurate sample positioning for inspection and teaching environments. Order the BioBlue BB.4267 directly via Metav Werkzeuge or ask our consultants if needed. BioBlue BB.4267 Digital microscope — 5 MP sensor, NeoLED illumination (Euromex) The BioBlue BB.4267 is a digital upright microscope designed for laboratory inspection, quality control and routine documentation tasks, combining high-resolution imaging with practical sample handling. 5 MP CMOS sensor, 2560 x 1920 pixels NeoLED illumination for consistent imaging Semi‑Plan objectives 4x/10x/S40x/S100x Integrated mechanical X‑Y stage, precise positioning Consistent high‑resolution images for clear documentation The combination of a 5 MP camera and a CMOS 1/2.8 inch sensor produces 2560 x 1920 pixel captures that are suitable for traceable documentation and visual inspection. Because the camera provides 24‑bit colour, images retain accurate colour rendition for reports and comparisons, while the max. 30 fps frame rate ensures smooth live viewing under normal operating conditions. These measurable properties reduce retakes and speed up image-based decision making, making the system a dependable option for routine lab work and incoming inspection. Optical versatility that adapts to varied sample types Equipped with Semi‑Plan 4x / 10x / S40x / S100x objectives and a binocular head, the instrument offers optical options for both overview and fine-detail work. The Semi‑Plan designation indicates field-flattening correction across the field of view, which improves edge sharpness and measurement reliability on flat samples. This optical flexibility supports tasks from component inspection to educational demonstrations, providing clear benefits where both overview and detail are required without changing platforms. Integrated handling and software for efficient workflows A built-in mechanical X‑Y stage enables precise sample positioning and repeatable scanning without external fixtures, accelerating routine measurements and image capture sequences. Digital connectivity via USB 2.0 and the bundled ImageFocus Plus software allow straightforward image transfer and basic measurement routines, streamlining documentation processes. At 4.1 kg, the unit is stable on a bench yet portable enough for reorganisation within a workshop. Accessories compatible with the digital model family are listed by Euromex; please consult the official accessory list and the listed restrictions when planning extensions. Discuss the Euromex BioBlue BB.4267 with Metav Werkzeuge for expert advice on matching NeoLED imaging to specific inspection tasks and secure reliable supply from Emmerich—contact info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: BB.4267 SKU: BB.4267 Manufacturer: Euromex Product type: Digital microscope Model series: BioBlue Facts Resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8 inch Frame rate: max. 30 fps Weight: 4.1 kg Connection: USB 2.0 Digital: true Special features Illumination: NeoLED Lens system: Semi‑Plan 4x / 10x / S40x / S100x Microscope head: Binocular Stage: Integrated mechanical X‑Y stage Camera: 24‑bit colour Software: ImageFocus Plus Accessories: See Euromex accessory list (AE.5130, AE.5025, AE.5040, PB.5155, PB.5165, PB.5168, PB.5245, PB.5255, PB.5274, PB.5275) FAQ What image resolution and colour depth does the system provide? The BioBlue BB.4267 captures at 5 MP with a pixel resolution of 2560 x 1920 and records in 24‑bit colour, ensuring detailed and colour‑accurate images for documentation. Which objectives are included and what do they support? The instrument uses Semi‑Plan 4x, 10x, S40x and S100x objectives; these deliver a flat field across the image and support both overview inspections and high‑detail observations. Can images be exported directly to a PC? Yes, the digital camera connects via USB 2.0 and works with ImageFocus Plus for capture and basic measurements, enabling fast file transfer and straightforward documentation. Is the stage suitable for precise sample positioning? The integrated mechanical X‑Y stage provides repeatable, fine positioning for inspection tasks and is particularly useful when documenting multiple regions on a single specimen. Are additional accessories available for the digital model family? Compatible accessories are listed on the official Euromex accessory list; consult the items referenced for the digital model family and observe any specified limitations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Semi‑Plan 4x/10x/S40x 2560 x 1920, 1 W LED, USB 2.0 - Euromex
Take advantage of the 5 MP sensor and versatile Semi‑Plan objective set for sharp inspection images and reliable documentation; combine precise optics with USB 2.0 connectivity and ImageFocus Plus for a streamlined imaging workflow. Order the BioBlue BB.4205 directly via Metav Werkzeuge or ask our consultants for integration advice. BioBlue BB.4205 — Digital microscope with 5 MP sensor and Semi‑Plan optics The BioBlue BB.4205 is a digital microscope designed for upright sample observation and digital documentation in laboratories and inspection environments. 5 MP sensor, 2560 x 1920 pixel resolution Semi‑Plan objective set 4x / 10x / S40x CMOS 1/2.8‑inch sensor with 24‑bit colour 1 W LED illumination for consistent lighting USB 2.0 connectivity and ImageFocus Plus software High‑resolution imaging for accurate inspection results The integrated 5 MP camera delivers 2560 x 1920 pixel captures on a CMOS 1/2.8‑inch sensor, providing detailed images for documentation and basic measurement tasks. With a 24-bit colour depth of 24‑bit, subtle contrasts and colour gradations are retained, which supports clearer defect recognition and traceability. A maximum of 30 fps ensures smooth live view for positioning and rapid evaluation. These specifications reduce the need for repeated captures and help maintain steady throughput in routine inspection work. Optics and lighting that improve image consistency Equipped with a Semi‑Plan objective set (4x / 10x / S40x), the system offers a flat field across most of the image area, limiting edge softening common to basic lenses. This optical design provides uniform sharpness across the field, which benefits measurement tasks and image stitching. Paired with a 1 W LED light source, the setup yields stable, cool illumination that minimises thermal drift and sample heating while delivering reproducible results under repeated inspections. Connectivity and software for efficient documentation workflows The microscope connects via USB 2.0, allowing reliable image transfer to workstations and compatibility with common imaging setups. Supplied with ImageFocus Plus, the solution supports live capture, basic measurement routines and export to standard formats for reporting. The software integration simplifies archiving and quick comparison of specimens, reducing administrative time and supporting a rational, auditable inspection process. Robust, compact design for routine laboratory use The unit is configured with a monocular head and a compact form factor, weighing 2.9 kg, which eases handling and bench integration without compromising stability. Compatibility with a range of manufacturer‑listed accessories extends functionality for specific tasks, such as specialised stands or illumination options. The construction is intended for repeated daily use in laboratory and light industrial environments where dependable imaging and simple operation are priorities. Contact Metav Werkzeuge for tailored advice on integrating the BioBlue BB.4205 into existing inspection workflows and for transparent, reliable supply from Emmerich. Technical data Article number: BB.4205 Product type: Digital microscope Model series: BioBlue Manufacturer: Euromex Label / SKU: BB.4205 Facts Resolution: 5 MP (2560 x 1920 pixels) Sensor: CMOS 1/2.8‑inch Frame rate: max. 30 fps Weight: 2.9 kg Illumination: 1 W LED Features Semi‑Plan 4x / 10x / S40x objective set Monocular head 24‑bit colour camera USB 2.0 connection ImageFocus Plus software Compatible accessories listed by manufacturer: AE.5130, AE.5025, AE.5040, PB.5155, PB.5165, PB.5168, PB.5245, PB.5255, PB.5274, PB.5275 FAQ What image resolution and colour depth does the system provide? The BioBlue BB.4205 captures images at 5 MP (2560 x 1920) with 24‑bit colour depth, enabling detailed, colour‑accurate documentation for inspection and reporting. Which objectives are supplied and what benefits do they offer? The supplied Semi‑Plan objectives (4x / 10x / S40x) deliver a flatter image field and more consistent sharpness across the frame, improving measurement reliability and reducing rework caused by edge blur. Is the camera suitable for live observation and capture? Yes; the camera supports up to 30 fps under optimal conditions for smooth live viewing, and images are transferred via USB 2.0 for capture and archiving using ImageFocus Plus. Can the microscope be integrated into existing imaging setups? Integration is straightforward: the unit uses USB 2.0 connectivity and standard capture software workflows, and the ImageFocus Plus package facilitates export to common file formats for downstream analysis. Are there compatible accessories to extend functionality? Manufacturer‑listed accessories are available for specialised stands, illumination and adaptors; consult the accessory list (codes such as AE.5130, PB.5155 etc.) for compatible options. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Semi‑Plan 4x/10x/S40x/S100x, 2560 x 1920 1 W LED, USB 2.0 - Euromex
Take advantage of a high‑resolution imaging chain and a mechanically precise specimen stage to speed inspection and documentation. The combination of a 5 MP sensor, Semi‑Plan objectives and an integrated X‑Y stage ensures clear images and repeatable positioning for routine laboratory, teaching and quality‑control tasks. Order the instrument directly via Metav Werkzeuge or contact their consultants for tailored advice. BioBlue BB.4255 — Digital microscope with 5 MP camera and integrated X‑Y stage (Euromex) The BioBlue BB.4255 is a compact digital microscope for routine laboratory inspection, teaching and quality‑control imaging, combining reliable optics with straightforward digital documentation. 5 MP camera 2560 x 1920 pixels Semi‑Plan objective set 4×–100× Integrated mechanical X‑Y stage Precise image capture for verifiable inspection The imaging chain is built around a 5 MP camera delivering 2560 x 1920 pixels on a CMOS 1/2.8" sensor, which provides sufficient resolution for routine inspection and documentation. At up to max. 30 fps, motion on a sample can be observed and recorded smoothly, while the 24‑bit colour output preserves colour fidelity for traceable visual records. This combination reduces rework by making defects easier to identify and document. Repeatable positioning for efficient workflows The integrated mechanical X‑Y stage allows controlled, stepwise scanning of a sample and ensures that positions can be revisited reliably, which is particularly valuable during quality control or comparison tasks. Paired with the Semi‑Plan objectives (4×, 10×, S40×, S100×), the arrangement supports both overview inspection and higher‑magnification checks without swapping instruments, saving time and maintaining alignment. Easy digital handling and compatibility with lab systems Data transfer is handled via USB 2.0 and images are managed with ImageFocus Plus, enabling straightforward capture, annotation and export into common file formats. The user interface of the supplied software simplifies routine documentation and reduces the time between observation and report generation. The 1 W LED illumination provides consistent, energy‑efficient lighting suitable for extended sessions. Robust design for daily laboratory use Built with a monocular head and practical ergonomics, the instrument weighs 3.4 kg and is easy to position on a bench or in a teaching environment. The optical design emphasises flat‑field performance for reliable image quality across the field of view, while the LED light source reduces maintenance compared with filament alternatives. The set‑up supports dependable everyday use with minimal downtime. For purchasing guidance or to discuss the Euromex BioBlue BB.4255 and its 5 MP imaging chain, contact Metav Werkzeuge in Emmerich by phone +49 2822 7131930 or email info@metav-werkzeuge.com for personalised advice and procurement support. Technical data Article number: BB.4255 SKU: BB.4255 Manufacturer: Euromex Product type: Digital microscope Facts Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8" Max frame rate: max. 30 fps Illumination: 1 W LED Weight: 3.4 kg Special features Objective system: Semi‑Plan 4x / 10x / S40x / S100x Stage: Integrated mechanical X‑Y stage Head: Monocular Interface: USB 2.0 Software: ImageFocus Plus Camera colour depth: 24‑bit colour FAQ Is the camera suitable for documentation and basic image analysis? The camera in the BioBlue BB.4255 (Euromex digital microscope, SKU BB.4255) provides 5 MP resolution and 24‑bit colour, which is appropriate for documentation and many basic image‑analysis tasks when used with ImageFocus Plus. What magnification range is available with the supplied objectives? The system uses Semi‑Plan objectives with 4×, 10×, S40× and S100× settings, enabling both overview observations and higher‑magnification inspections on the same platform. Can the BB.4255 capture live video smoothly? Under optimal conditions the camera can output video at max. 30 fps, allowing real‑time observation and recording suitable for demonstrations or dynamic sample inspection. Is the illumination integrated and serviceable? The instrument includes an integrated 1 W LED light source that provides stable illumination with reduced maintenance compared with traditional lamps. Does the system support export to common file formats? Yes, images captured with the BioBlue BB.4255 can be managed and exported via ImageFocus Plus, which supports common export formats for reporting and archiving. Is the stage suitable for repeatable positioning? The integrated mechanical X‑Y stage provides controlled, repeatable specimen positioning, which improves efficiency for sequential inspections and comparative measurements. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Semi‑Plan Lenses, 2560 x 1920 Resolution, NeoLED Illumination - Euromex
The combination of a 5 MP camera and NeoLED illumination ensures high-contrast images for reliable documentation, while the integrated mechanical X‑Y stage and ImageFocus Plus software speed up measurement workflows. Order the Euromex unit directly via Metav Werkzeuge or consult our specialists for specification matching. BioBlue BB.4269 Digital microscope — 5 MP camera with NeoLED lighting (Euromex) The BioBlue BB.4269 is a benchtop digital microscope designed for visual inspection, documentation and routine measurement tasks in laboratories, quality control and educational environments. 5 MP camera, 2560 x 1920 resolution NeoLED illumination for consistent contrast Binocular head with ImageFocus Plus software Integrated mechanical X‑Y stage Precise imaging for dependable documentation and analysis The high‑resolution 5 MP sensor delivers 2560 x 1920 pixels and captures images in 24‑bit colour, allowing clear visual records suitable for reports and traceable documentation. The camera uses a CMOS 1/2.8" sensor, which balances light sensitivity and resolution for sharp results under variable sample conditions. With image capture at max. 30 fps, live inspection is fluid, reducing the need for repeat adjustments and enabling faster decision making in routine workflows. Faster inspection cycles through integrated mechanics and software Workflows benefit from the integrated X‑Y stage combined with ImageFocus Plus software; the stage provides controlled sample movement while the software supports capture, annotation and simple measurement routines. The USB 2.0 connection ensures straightforward data transfer to standard laboratory PCs and simplifies archiving. These features lower cycle times for repetitive tasks and help maintain consistent results across batches. Optical components engineered for repeatability and clarity Optical versatility is provided by Semi‑Plan objectives (4x, 10x, S40x, S60x) that reduce field curvature and improve flatness across the image, which is essential for comparative inspection and basic measurements. The binocular head offers ergonomic viewing for observation sessions and eases the transition between direct observation and digital capture. Semi‑Plan optics deliver a balance between wide, undistorted fields and sufficient magnification for detailed inspection. Built for everyday laboratory use and accessory adaptability At 4.1 kg, the instrument is compact enough for bench use while remaining stable during fine adjustments. The unit is listed with a range of approved accessories on the manufacturer’s accessory list (observe specified configurations and constraints), enabling adaptation for specific sample types or specialised tasks. The combination of robust illumination, clear optics and reliable imaging makes this model suitable for educational labs, routine QC and light analytical tasks where consistent visual data is required. For tailored advice on the Euromex BioBlue BB.4269 — including accessory compatibility and delivery from Metav Werkzeuge’s Emmerich stock — contact Metav Werkzeuge GmbH at info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: BB.4269 SKU: BB.4269 Manufacturer: Euromex Model series: BioBlue Product type: Digital microscope Facts Camera resolution: 5 MP Pixel resolution: 2560 x 1920 Sensor: CMOS 1/2.8" sensor Frame rate: max. 30 fps Weight: 4.1 kg Special features NeoLED illumination Semi‑Plan 4x / 10x / S40x / S60x objectives Integrated mechanical X‑Y stage Binocular head ImageFocus Plus software USB 2.0 connection 24‑bit colour capture Digital microscope, ready for routine inspection FAQ What image resolution and colour depth does the system provide? The BioBlue BB.4269 records at 5 MP with 2560 x 1920 pixels and captures images in 24‑bit colour for accurate colour rendition. Can the microscope be used for basic measurements and documentation? Yes, the integrated mechanical X‑Y stage together with ImageFocus Plus enables repeatable sample positioning and straightforward measurement and documentation workflows. Which objectives are supplied and what optical benefits do they offer? Supplied options include Semi‑Plan objectives (4x, 10x, S40x, S60x); these reduce field curvature and provide flatter images across the field for more reliable inspection. Is live inspection smooth enough for practical laboratory use? With a CMOS 1/2.8" sensor and up to max. 30 fps, the system supports fluid live viewing suitable for routine inspection and sample alignment. What interface is used to transfer images to a PC? The unit uses USB 2.0 for data transfer, offering compatibility with standard laboratory computers and enabling quick image archiving. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope Upright NeoLED Köhler Illumination, 2592 x 1944 CMOS - Euromex
Benefit from high-detail imaging and reliable Köhler illumination to speed up inspection and documentation tasks; the combination of a 5 MP sensor and versatile objective set ensures precise results with efficient workflow integration — order the instrument directly via Metav Werkzeuge or contact our consultants for tailored advice. bScope BS.1157-EPLi — Digital microscope with 5 MP sensor and NeoLED Köhler illumination (Euromex) The bScope BS.1157-EPLi is a benchtop digital microscope designed for routine inspection, documentation and teaching in laboratories and quality control environments 5 MP CMOS sensor for detailed images NeoLED Köhler transmitted illumination E‑Plan IOS objectives incl. 4x–100x oil Supplied with ImageFocus Alpha software Accurate imaging for measurement and traceability The instrument is built around a 5 MP CMOS 1/2.5 inch sensor and a native pixel resolution of 2592 x 1944, which together provide high spatial detail suitable for visual inspection and image-based measurements. At full resolution the system delivers 7 fps, while a reduced resolution mode allows smoother live observation at 27 fps; these figures are specified by the manufacturer for optimal conditions and support both frame-grab documentation and live demonstrations. The result is a reliable image capture workflow that reduces rework and speeds up quality-control cycles by producing crisp, reproducible images. Optics and illumination that improve contrast and working comfort Optical performance is provided by the E‑Plan IOS objectives, covering low to high magnification ranges and including oil-immersion capability for high-resolution work. Even, reproducible lighting is achieved by the NeoLED Köhler transmitted illumination, which ensures uniform field brightness and improved contrast for transparent or thin samples. The binocular head with diopter adjustment on both sides supports comfortable, prolonged use and straightforward visual alignment before image capture — a practical advantage for teaching labs and repetitive inspection tasks. Digital integration for documentation and analysis Image handling and measurement are supported by ImageFocus Alpha software and a standard USB 2.0 interface, enabling easy connection to a workstation for image acquisition, annotation and export. The system’s dynamic range (76 dB), signal-to-noise ratio (41 dB) and 24-bit colour depth help preserve detail and colour fidelity in recorded images, which is essential when results enter a traceability chain or are used in reports. A calibration slide (1 mm / 100") included in the scope of delivery allows immediate verification of measurement scales and simplifies documentation procedures. Practical design for laboratory routines and education The device’s layout and supplied accessories — including the USB‑2.0 cable and calibration slide — make it ready for rapid deployment on the bench. Optional rechargeable AA batteries are offered for situations that require temporary portable operation. Robust optics, straightforward controls and software-driven capture make this digital microscope well suited to routine laboratory inspection, quality control benches and instructional settings where consistent imaging and ease of use matter most. Contact Metav Werkzeuge in Emmerich for a consultation on integrating the Euromex bScope BS.1157-EPLi into inspection workflows; technical advice and fast supply are available at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: BS.1157-EPLi SKU: BS.1157-EPLi Brand: Euromex Product type: Digital microscope Model series: bScope Manufacturer article number: BS.1157-EPLi Performance figures Resolution: 5 MP Pixel resolution: 2592 x 1944 Sensor: CMOS 1/2.5 inch Frame rates: 7 fps at 2592 x 1944; 27 fps at 1280 x 960 Dynamic range: 76 dB Signal-to-noise ratio: 41 dB Colour depth: 24 bit Features and accessories Illumination: NeoLED transmitted illumination, Köhler Optics: E‑Plan IOS objectives (includes oil-immersion option) Microscope head: Binocular Diopter adjustment: Both sides Software: ImageFocus Alpha Connection: USB 2.0 Supplied accessories: USB‑2.0 cable; calibration slide 1 mm/100" Power options: Optional three rechargeable AA batteries FAQ What frame rates can be expected for live observation? The instrument delivers 7 fps at full 2592 x 1944 resolution and up to 27 fps at reduced resolution; these values for the bScope BS.1157-EPLi are specified by the manufacturer under optimal operating conditions. Is a calibration standard included for measurement work? Yes, the scope of delivery contains a calibration slide (1 mm / 100") that enables immediate verification of measurement scales with the bScope BS.1157-EPLi. Which software is supplied for image capture and analysis? The bScope BS.1157-EPLi is supplied with ImageFocus Alpha, which supports image acquisition, basic measurement and export via the USB 2.0 connection. Can the system handle high-magnification oil-immersion tasks? The supplied E‑Plan IOS objective set includes high-magnification optics with oil-immersion capability suitable for detailed surface and micro-structure work. Is there an option for battery operation away from a workstation? An optional set of three rechargeable AA batteries is listed for flexible usage scenarios; consult technical documentation for configuration details of the bScope BS.1157-EPLi. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
5 MP Digital Microscope With 2560 x 1920 Resolution, Dual NeoLED, USB 2.0 - Euromex
Take advantage of high-resolution imaging, reliable LED illumination and a precise mechanical stage for consistent inspection workflows; order the Euromex instrument directly via Metav Werkzeuge or request advice from our consultants for integration into existing inspection stations. EcoBlue EC.1657 – Digital microscope with 5 MP camera and Dual NeoLED (Euromex) The EcoBlue EC.1657 is a digital upright microscope optimised for inspection, teaching and routine quality control, featuring a binocular head and an integrated mechanical X–Y stage for accurate sample positioning. 5 MP sensor, 2560 x 1920 pixel resolution Dual NeoLED illumination system Achromatic objectives 4x, 10x, S40x, S60x Integrated mechanical X‑Y stage 123 x 119 mm USB 2.0 connection with ImageFocus Plus High-resolution imaging for precise documentation and measurement The instrument is built around a 5 MP camera delivering 2560 x 1920 pixels via a CMOS 1/2.8-inch sensor, which supports a maximum of 30 fps under optimal conditions. This combination produces clear stills and usable live video for fast defect detection and traceable documentation. Higher pixel density means finer detail capture for measurements and reporting; the native resolution also reduces the need for aggressive interpolation when annotating images in software. Reliable illumination and optics for accurate colour and contrast Consistent visual results are achieved through the Dual NeoLED system paired with achromatic objectives, which minimise chromatic aberration and keep contrast stable across magnifications. The achromatic lens set (4x, 10x, S40x, S60x) provides faithful reproduction of sample features; in practical terms, this means fewer retakes and more reliable visual inspection. The optical turret with four positions simplifies switching between fields of view without losing focus, speeding up routine checks. Stable sample handling and efficient workflow integration A mechanically integrated X‑Y stage measuring 123 x 119 mm facilitates systematic scanning and repeatable positioning, essential for inspection protocols and comparative analysis. The binocular head offers conventional stereoscopic observation while the camera streamlines digital capture. Connection via USB 2.0 and the bundled ImageFocus Plus software enable immediate image acquisition and basic measurement functions on a standard workstation, improving throughput and reducing setup complexity. Ready for lab, classroom and shop‑floor use with practical accessories The digital package includes a calibration slide (1 mm/100) and a USB‑2.0 cable for straightforward commissioning; the camera operates in 24-bit colour for natural rendering of samples. Notes from the manufacturer state that image rates apply under optimal conditions, so environments with heavy processing or non‑standard lighting may affect live‑view performance. The overall configuration balances optical quality and operational simplicity to suit training, incoming inspection and routine component checks. For high-resolution documentation and reliable routine inspection, consult Metav Werkzeuge about the Euromex EcoBlue EC.1657 and arrange a tailored integration plan from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss options and delivery. Technical data Article number: EC.1657 SKU: EC.1657 Product type: Digital microscope Model series: EcoBlue Manufacturer: Euromex Facts Resolution: 5 MP (2560 x 1920 px) Sensor: CMOS 1/2.8-inch Frame rate: max. 30 fps Stage dimensions: 123 x 119 mm Objectives: 4x / 10x / S40x / S60x Special features Dual NeoLED illumination Binocular head ImageFocus Plus software 24-bit colour camera USB 2.0 connection Objective turret with four positions Integrated mechanical X‑Y stage Included: USB‑2.0 cable; calibration slide 1 mm/100 FAQ What resolution does the microscope support? The Euromex EcoBlue EC.1657 features a 5 MP camera with a native pixel resolution of 2560 x 1920, suitable for detailed inspection and documentation. Which objectives are fitted and how do they affect image quality? Achromatic objectives (4x, 10x, S40x, S60x) minimise colour fringing and improve sharpness across the field, so the EcoBlue EC.1657 delivers clearer images for measurement and visual inspection. Is the instrument suitable for teaching and demonstration? Yes; the binocular head combined with a camera output via USB 2.0 and ImageFocus Plus software makes the instrument well suited to classrooms and practical demonstrations. What accessories are included with delivery? Delivery of the EcoBlue EC.1657 includes a USB‑2.0 cable and a calibration slide (1 mm/100) to support immediate setup and measurement verification. Can the stage support systematic scanning and repeatable positioning? The integrated mechanical X‑Y stage (123 x 119 mm) enables repeatable sample positioning and methodical scanning for inspection routines. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com