Planfräser für schnelle, plane Flächenbearbeitung
Planfräser sind speziell entwickelte Trägerwerkzeuge zum großflächigen Abtrag und exakten Planfräsen von Werkstücken und verbessern die Oberflächenqualität sowie die Prozessstabilität bei der Bearbeitung von Stahl, Guss und NE-Metallen; sie kommen sowohl in offener Ausführung ohne Innenkühlung als auch als innengekühlte Varianten zum Einsatz, wobei die innengekühlte Version durch gezielte Kühlmittelzufuhr thermische Überlastung verhindert und die Standzeit erhöht. Die Werkzeuge dienen dazu, große Schnittbreiten effizient zu bearbeiten und durch optimale Spanabfuhr eine gleichmäßige Oberfläche zu erzeugen, wobei die offene Ausführung einfache Fräsaufgaben mit externer Kühlung abdeckt. Planfräser bieten besonders bei schwer zerspanbaren, wärmeempfindlichen oder klebenden Werkstoffen Vorteile, weil die innengekühlte Bauform die Bildung von Aufbauschneiden reduziert und die Oberflächengüte verbessert.
100mm Angle Turning Head For R390-1704 Indexable Inserts, 90° Cutting Angle, 8 Cutting Edges, M3.5x8.5 Torx Screw - Teknik Makina
Take advantage of a robust combination of compatibility, precise geometry and straightforward mounting: the corner tool head is optimised for R390‑1704 indexable inserts, has a 32 mm shank for secure clamping and a 90° cutting angle for consistent entry geometry — order via Metav Werkzeuge or consult our specialists for tailored integration into existing tool turrets. Corner tool head T412TM — for R390‑1704 indexable inserts by Teknik Makina Corner tool head T412TM designed as a heavy‑duty holder for R390‑1704 indexable inserts, suited to turning and facing operations where a 90° cutting geometry and reliable repeatability are required Compatible with Sandvik R390‑1704 inserts 32 mm shank diameter for secure clamping 90° cutting angle for consistent entry geometry Torx M3.5×8.5 screw with T15 key Stable, predictable cutting performance for indexable inserts The T412TM tool head is engineered to deliver consistent cutting geometry, making it easy to predict chip flow and surface finish when used with standard R390‑1704 indexable inserts. The 90° cutting angle provides a neutral engagement that simplifies process planning and reduces the need for angle compensation in CAM programs. With a 32 mm shank and a head diameter of 100 mm, the component provides the rigidity expected in high‑torque operations; this rigidity translates directly into stable cutting conditions and extended insert life. These characteristics make the holder suitable for mixed production runs where reproducibility and quick insert changes are priorities. Quick set‑up, secure fastening and efficient workshop handling Time in set‑up is reduced by a straightforward clamping and fastening concept: the head secures inserts with a Torx M3.5×8.5 screw operated by a T15 key, enabling repeatable torque application and predictable clamp force. The component’s overall length of 52 mm and a mass of 1.665 kg balance accessibility at the turret with sufficient mass to dampen vibration on heavier cuts. The combination of a wide shank and standardised Torx fastening supports fast tool exchanges and routine maintenance, which in turn increases machine uptime and simplifies tool inventory control in the workshop. Compatibility and practical benefits for production workflows Designed to accept Sandvik‑style R390‑1704 inserts, this holder integrates into established tooling systems without the need for bespoke adaptors. The eight cutting faces indicated for the head allow flexible indexing strategies when matched with multi‑edge inserts, helping to reduce downtime between edge changes. The T412TM supports common workshop practices such as pre‑setting and offline inspection, while its standardised dimensions make it straightforward to document in tooling lists and CAM setups. For purchasers looking to reduce supplier complexity, the holder’s compatibility with widely used indexable inserts makes inventory management more predictable and cost‑effective. Contact Metav Werkzeuge for detailed integration advice on Teknik Makina’s Corner tool head T412TM and to arrange prompt supply from our Emmerich warehouse Technical data Article number: T412TM Manufacturer: Teknik Makina Product: Corner tool head for R390‑1704 indexable inserts SKU: T412TM Compatible insert type: R390‑1704 (Sandvik) Fastening: Torx M3.5×8.5 screw, T15 key Core specifications Shank diameter: 32 mm Head diameter: 100 mm Cutting edges: 8 Cutting angle: 90° Total length: 52 mm Weight: 1.665 kg Special features Compatible with Sandvik R390‑1704 indexable inserts Standard Torx fastening for repeatable clamp torque Designed for turning/facing operations requiring 90° geometry Robust construction for reduced vibration and stable cutting FAQ Is this tool head compatible with Sandvik R390‑1704 inserts? Yes. The corner tool head accepts R390‑1704 indexable inserts and is specified for compatibility with Sandvik insert geometries. What shank size is required for mounting the holder? The holder uses a 32 mm shank for clamping; this dimension should be matched to the turret or toolpost receptacle. Which screw and key are needed to secure the insert? Inserts are secured with a Torx M3.5×8.5 screw; a T15 key is used for installation and removal. What are the physical dimensions and weight of the tool head? The tool head has a 100 mm head diameter, total length 52 mm and a weight of 1.665 kg, offering a stable mass for most turning operations. Can the tool head be used for facing and profiling? Yes. With its 90° cutting angle and compatibility with multi‑edge inserts, the holder is suitable for facing and profile turning where a square‑entry geometry is required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Cutting Head for XOMX 1204 Indexable Inserts L52mm with Internal Coolant - Teknik Makina
Take advantage of the combination of precision compatibility, internal coolant performance and robust design to maintain steady production flows; order via Metav Werkzeuge or consult our specialists for application advice. Eckmesserkopf — Corner milling head, 100 mm diameter, internal coolant (Teknik Makina) Eckmesserkopf for XOMX 1204 indexable inserts, a compact corner milling head designed for precise shoulder work and reliable chip control in industrial turning and milling centres 100 mm diameter for stable cutting Internal coolant for improved chip evacuation Compatible with XOMX 1204 indexable inserts Robust build with 10 cutting edges for long runs Stable shoulder finishes through optimised geometry The head delivers consistent results because its 100 mm diameter and 90° cutting angle provide a defined cutting plane that reduces deflection during shoulder milling. With 10 cutting edges distributed for balanced engagement, cycle-to-cycle variation is reduced and surface quality is improved. The design converts insert geometry into predictable machining outcomes, which supports process planning and helps to meet tolerances with fewer reworks. The result is a measurable increase in first-pass yield for repeat operations. Lower process risk thanks to internal coolant and secure clamping Built-in internal coolant channels supply cutting fluid directly to the cutting zone, which reduces thermal load and supports stable chip breaking in continuous runs. This cooling strategy extends insert life and maintains cutting-edge integrity under demanding conditions. The head is secured with a T10 Torx drive and M3.5x8.5 screw, providing reliable clamping that minimises micro-movements and enables reproducible positioning after insert changes. Together, these features reduce unscheduled downtime and contribute to more predictable tool-change intervals. Easy integration with standard indexable systems and compact footprint Engineered for compatibility with XOMX 1204 indexable inserts and noted compatibility with SECO inserts, the component adapts to common tooling systems used in industry, simplifying stock management. The 32 mm mounting diameter and total length of 52 mm enable a compact toolset layout while preserving rigidity; the head’s mass of 1.817 kg contributes to stability under axial loads. These attributes allow integration into existing tooling assemblies without extensive modification, streamlining set-up and reducing fixture complexity. For reliable supply and tailored technical advice on the Teknik Cutting Tools corner milling head, contact Metav Werkzeuge to confirm compatibility and secure stock for upcoming production needs Technical data SKU: T518-1TM Product type: Eckmesserkopf Article name: Eckmesserkopf for XOMX 1204 Indexable Inserts Manufacturer: Teknik Makina Label: 100mm Eckmesserkopf XOMX 1204 L52mm mit Innenkühlung ECLASS: 21181015 Core specifications Diameter: 100 mm Mounting diameter: 32 mm Total length: 52 mm Weight: 1.817 kg Cutting edges: 10 Cutting angle: 90° Torx key: T10 Torx screw: M3,5x8,5 Aufnahme mm D: 32 Special features Internal coolant (yes) Fits inserts: XOMX 1204 Compatible insert manufacturer: SECO Indexable insert system Robust industrial design FAQ Which inserts fit this corner milling head? The corner milling head accepts XOMX 1204 indexable inserts and is noted as compatible with inserts from SECO, enabling use of established grades and geometries for various materials. Is the head suitable for continuous production runs? Yes — the combination of internal coolant and a robust clamping system with 10 cutting edges makes the head well suited to long, uninterrupted cycles and predictable tool life. How is coolant supplied to the cutting zone? Coolant is delivered through integrated internal channels, so the coolant reaches the insert rake face directly, supporting chip control and reduced cutting temperatures during operation. What mounting dimensions and weight should be considered for machine set-up? Take into account the 32 mm mounting diameter, 52 mm total length and mass of 1.817 kg when planning tool overhang and spindle loading to preserve rigidity and avoid unwanted vibration. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head ANKX 1706 L52mm Internal Coolant, 90° Indexable Inserts - Teknik Makina
Benefit from precise face machining with a 100 mm diameter, reliable internal coolant and a compact 52 mm overall length that together reduce cycle times and improve surface quality; order the tool via Metav Werkzeuge or contact our consultants for application advice. Indexable corner head — 100 mm, internal coolant, for ANKX 1706 (Teknik Makina) An Indexable corner head designed for use with ANKX 1706 indexable inserts, optimised for precision face turning and stable operation in production environments. 100 mm cutting head diameter Internal coolant supply Compatible with ISCAR ANKX 1706 inserts Robust 52 mm overall length Delivering consistent precision for face machining The compact cutting head delivers a 100 mm diameter reference surface that stabilises machining forces and contributes to consistent part geometry. Fitted with a 90° cutting angle and seven cutting positions, the design supports repeated index changes to maintain a uniform finish and minimise downtime. The combination of a short 52 mm overall length and solid mass reduces vibration, which improves surface finish and lowers scrap rates—advantages that translate directly into higher process efficiency and reduced rework. Cooling and serviceability for uninterrupted production An integrated internal coolant channel ensures effective heat removal at the cutting edge, extending insert life and preserving cutting-edge geometry during extended cuts. The head uses Torx screws (Torx key T20, screw M5x12) for secure clamping and straightforward replacement of the insert carrier; this reduces tool-change time and simplifies workshop logistics. With a machine-ready weight of 2.029 kg, the unit offers a balance between rigidity and manageable handling, supporting stable spindle loading without excessive inertia. Compatibility that simplifies tooling management Configured for ANKX 1706 indexable inserts and compatible with ISCAR standards, the head integrates smoothly into existing tool families and inventory systems. The modular approach reduces the need for special adapters and shortens setup, while the standardised fixing system promotes secure seating and repeatable positioning. The Teknik Makina unit (SKU T448-1TM) therefore supports streamlined tool planning and predictable cycle times in small-batch and serial production alike. For tailored application advice and rapid supply from Metav Werkzeuge in Emmerich, contact our specialists about the Teknik Makina Indexable corner head (SKU T448-1TM) with internal coolant. Technical data SKU: T448-1TM Product: Indexable corner head for ANKX 1706 indexable inserts Manufacturer: Teknik Makina Facts Diameter: 100 mm Overall length: 52 mm Weight: 2.029 kg Cutting angle: 90° Cutting edges: 7 Features & compatibility Internal coolant: Yes Compatible insert: ANKX 1706 Compatible insert manufacturer: ISCAR Torx key: T20 Torx screw: M5x12 eClass: 21181015 Product type: Indexable corner head FAQ Which inserts does the head accept? The head accepts ANKX 1706 indexable inserts and is compatible with ISCAR-manufactured inserts specified for that geometry. How does the internal coolant improve performance? Internal coolant channels in the head deliver cooling directly to the cutting zone, which reduces thermal distortion and extends insert life for the Teknik Makina indexable head. What screw type secures the inserts and how are they serviced? Inserts are secured with Torx screws (M5x12) using a Torx T20 key for straightforward replacement and reliable clamping. Is the tool suitable for heavy interrupted cuts? The compact 52 mm overall length and substantial mass (2.029 kg) increase rigidity, making the head suitable for demanding face-turning applications where stability is required. What are the main dimensional specifications to check before ordering? Key dimensions are a 100 mm diameter and 52 mm overall length; additionally confirm compatibility with ANKX 1706 inserts and the ISCAR system. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head BOMT 1304 L50mm With Internal Cooling, 90° - Teknik Makina
Take advantage of the robust combination of large cutting diameter, integrated cooling and secure Torx fastening for steady, repetitive corner machining; order or request tailored advice from Metav Werkzeuge for reliable supply and fast delivery. Corner tool head T970TM — 100 mm with internal coolant (Teknik Makina) The Corner tool head for BOMT 1304 Indexable Inserts is a precision-cutting solution intended for corner and shoulder machining in CNC and turning operations, combining a large diameter with integrated coolant for consistent surface quality. 100 mm diameter head Integrated internal coolant supply Compatible with BOMT 1304 inserts Eight cutting edges, 90° cutting angle Maximise material removal with stable, large-diameter design The 100 mm diameter of this cutting head increases radial engagement and improves chip load distribution, which in turn raises productivity on repetitive shoulder and corner operations. With an overall length of L50 mm, the assembly balances accessibility and rigidity to reduce chatter. The presence of eight cutting edges means fewer index changes and longer intervals between maintenance, which lowers downtime and keeps cycle times stable. For machining centres and turret lathes requiring repeatable right‑angled faces, the geometry supports consistent results and reduced scrap rates. Repeatable setups through secure clamping and proven compatibility Secure fastening is achieved via a T10 Torx key and M3.5x8.5 Torx screws, providing a positive torque transfer and minimising insert movement during heavy intermittent cuts. The head is designed for BOMT 1304 indexable inserts and is listed as compatible with Ingersoll insert systems, which simplifies procurement and inventory for shops already standardised on those inserts. Clear, standardised hardware reduces setup uncertainty and supports reproducible tool offsets across multiple machines, improving first‑pass yield. Integrated cooling and mass for consistent surface finish An internal coolant channel is built into the head to deliver cutting fluid directly to the insert pocket, aiding chip evacuation and maintaining thermal stability at the cutting edge. This cooling reduces built-up edge and supports consistent finishes on machined shoulders. The unit mass of 1.542 kg contributes to cutting stability and dampens vibration, which helps produce sharp, square corners at a 90° cutting angle with reduced tool deflection. The design therefore supports both short production runs and longer batch processing with minimal compromise on surface integrity. Contact Metav Werkzeuge for a tailored supply proposal from Emmerich — Metav can advise on compatibility, delivery times and order processing to secure this Teknik Makina corner tool head (SKU T970TM) for production use — eMail: info@metav-werkzeuge.com · Tel: +49 2822 7131930 Technical Data SKU: T970TM UID: T970TM ECLASS: 21181015 Product type: Corner tool head Label: 100mm Eckmesserkopf BOMT 1304 L50mm mit Innenkühlung Manufacturer: Teknik Makina Facts Diameter: 100 mm Overall length: 50 mm Weight: 1.542 kg Cutting edges: 8 Cutting angle: 90° Torx key: T10 Torx screw: M3.5x8.5 ECLASS code: 21181015 Special features Internal coolant For BOMT 1304 indexable inserts Compatible with Ingersoll inserts Category path: Zerspanen > Eckmesserkopf SKU/Label as above FAQ Is the head compatible with BOMT 1304 inserts? Yes. The corner tool head (Teknik Makina, SKU T970TM) is designed specifically for BOMT 1304 indexable inserts and mates with standard pocket dimensions for those inserts. Does the tool head provide internal coolant delivery? Yes. The T970TM includes an internal coolant channel to supply fluid directly to the insert pocket, improving chip control and tool life. How many usable cutting edges are available on the head? The head carries eight cutting edges, enabling multiple indexings before insert replacement is required, which extends productive tool life. What fastening hardware is required for assembly? Assembly uses a T10 Torx key and M3.5x8.5 Torx screws as specified for secure clamping of the inserts. What are the dimensional and mass specifications? The head measures 100 mm in diameter with an overall length of 50 mm and weighs 1.542 kg, offering a balance of reach and rigidity for corner machining. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head for AP-- 1604 Indexable Inserts L52mm With Internal Coolant, 90° - Teknik Makina
Take advantage of a rigid 100 mm cutting head with internal coolant and a precise 90° cutting angle to maintain stable cycle times and extend insert life; order the component directly via Metav Werkzeuge or consult our experts for application-specific advice. Corner turning head — 100 mm diameter, internal coolant (Teknik Makina) The Corner turning head for AP-- 1604 indexable inserts is designed for square-shoulder turning and external profiling on lathes, offering coolant-through capability for improved chip control and tool life. 100 mm diameter head Internal coolant supply 90° cutting angle for square shoulders Compatible with AP-- 1604 inserts (Korloy) Improve process stability with a rigid 100 mm design A larger tool head diameter increases stiffness and reduces deflection during heavy cuts, which leads to more consistent part tolerances and fewer reworks. The 100 mm dimension is engineered to stabilise cutting forces and to support repeatable programme times; this contributes to predictable throughput in production environments. By choosing a robust head, downtime from chatter-related quality issues is reduced and cycle reliability is enhanced. Coolant-through routing that extends insert life The built-in internal coolant channel delivers cutting fluid directly to the cutting edge, improving cooling and chip evacuation. This targeted supply reduces temperature peaks at the cutting edge, which slows wear and maintains edge geometry over longer tool life. For materials prone to thermal softening or difficult-to-manage chips, the coolant-through feature supports higher metal removal rates while protecting the insert grade and substrate. Purposeful geometry for accurate shoulder turning With a 90° cutting angle, the head is optimised for square-shoulder operations and facing tasks where perpendicular contact is required. The geometry enables clean transitions between faces and shoulders, reducing burr formation and minimising secondary finishing. The head accepts AP-- 1604 indexable inserts, a common insert family that balances economy and cutting performance for a wide range of steel and non-ferrous applications. Fewer tool variants through broad compatibility Compatibility with Korloy AP-- 1604 inserts and a standard fastening system simplifies inventory management. The head accommodates multiple cutting edges and is secured with an M4x10 Torx screw using a T15 key, making assembly and insert changes straightforward for trained shop staff. Consolidating holders around this interface helps reduce the number of different tool bodies required across turning applications. Practical dimensions and handling for workshop use The compact overall length of 52 mm and a mass of 1.532 kg make the head easy to mount while providing the mass necessary for damping vibrations. The unit features a multi-insert arrangement supporting up to 8 engagement positions, useful for operations requiring distributed cutting forces or sequential indexing. The design balances accessibility for maintenance with the rigidity demanded in production turning. For coolant-capable, square-shoulder turning choose the Teknik Makina T189-1TM corner turning head—contact Metav Werkzeuge in Emmerich for stock information and application guidance at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: T189-1TM UID: T189-1TM Manufacturer: Teknik Makina Core specifications Diameter: 100 mm Overall length: 52 mm Weight: 1.532 kg Number of cutting positions: 8 Cutting angle: 90° Torx screw: M4x10 Torx key: T15 Features & compatibility Internal coolant: yes Suitable for: AP-- 1604 indexable inserts Compatible insert manufacturer: Korloy Product type: Corner turning head FAQ Which insert type fits this head? The head is designed for AP-- 1604 indexable inserts and is compatible with Korloy grades suited to the application. Does the tool provide coolant-through capability? Yes, the T189-1TM corner turning head features internal coolant to improve cooling at the cutting edge and assist chip evacuation. What is the nominal diameter and overall length? The tool has a nominal diameter of 100 mm and an overall length of 52 mm, balancing rigidity and accessibility. How is the insert secured and which key is required? Inserts are fastened with an M4x10 Torx screw; a T15 key is required for tightening and loosening. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head for APMT 11T3 Indexable Inserts with Internal Coolant, 90° - Teknik Makina
Take advantage of the combination of robust stability, internal coolant delivery and precise insert compatibility for shorter cycle times and longer tool life; order the component through Metav Werkzeuge or contact our consultants for application advice. Corner milling head by Teknik Makina — 100 mm, internal coolant The Corner milling head for APMT 11T3 indexable inserts is a compact, coolant-fed cutting head engineered for precision face and shoulder milling in production environments. 100 mm diameter, robust construction Internal coolant for stable chip evacuation 90° cutting angle for square shoulder milling Compatible with APMT 11T3 inserts (Korloy) Greater stability for higher material removal rates The large 100 mm body diameter and solid construction deliver enhanced rigidity that reduces chatter and improves surface finish in demanding operations. With an overall length of 63 mm, the head offers a compact overhang that permits higher feed rates while maintaining dimensional accuracy. The result is predictable process behaviour and longer insert life, which reduces unplanned tooling changes and supports continuous production. Coolant-fed cutter for controlled cutting temperatures Integrated internal coolant ensures direct lubrication and cooling at the cutting zone, which lowers thermal load on the insert and workpiece. This feature supports consistent cutting conditions, particularly when machining tougher alloys or when higher cutting speeds are required. By promoting efficient chip evacuation and heat dissipation, the coolant channel contributes to steady tool performance and reduced risk of thermal damage. Quick, secure insert clamping for minimal downtime Designed for APMT 11T3 indexable inserts, the head uses a Torx clamping system (key Torx T8) with screws M2.5x5.5 to secure each insert reliably. The straightforward clamping geometry enables fast index changes and repeatable seating, so setup times are shortened and assembly errors are minimised. Compatibility with Korloy inserts offers availability of proven grades and geometries for a range of materials. Right-angled cutting for precise shoulder and face work With a 90° cutting angle, the tool head excels at square shoulder milling and face operations where perpendicular contact and true shoulders are required. The configuration is suitable for mixed production workshops and small-series manufacturing where flexibility and repeatable accuracy are priorities. The head’s ten cutting positions support extended service intervals and cost-effective operation. For technical planning or to request application-specific recommendations for the Teknik Makina corner milling head (SKU T258-1TM), contact Metav Werkzeuge to discuss suitability, delivery or compatible insert grades via info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data Article number: T258-1TM ECLASS: 21181015 Product type: Corner milling head Label: 100mm Eckmesserkopf APMT 11T3 L63mm mit Innenkühlung Facts Diameter: 100 mm Overall length: 63 mm Weight: 1.81 kg Cutting edges: 10 Cutting angle: 90° Special features Internal coolant Compatible with APMT 11T3 indexable inserts Compatible insert manufacturer: Korloy Torx key: T8 Torx screw: M2.5x5.5 Manufacturer: Teknik Makina FAQ What inserts fit this cutter head? The head accepts APMT 11T3 indexable inserts; Korloy grades are noted as compatible for a range of materials and cutting conditions. Does the head provide internal coolant? Yes, internal coolant is integrated to ensure direct delivery of lubricant and cooling to the cutting edge, improving stability and tool life for the corner milling head T258-1TM. What is the cutting geometry and where is it used? The tool features a 90° cutting angle, making it well suited for square shoulder and face milling operations in production and workshop environments. How are the inserts secured? Inserts are clamped with Torx T8 screws (size M2.5x5.5) for secure, repeatable seating and fast index changes. Is the component suitable for heavy-duty milling? The 100 mm diameter and robust design provide high rigidity; combined with internal coolant and multiple cutting edges, the head supports stable milling in many production tasks (material suitability should be checked against insert grade). Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head For LNHU 1306 Indexable Inserts, 90° Cutting Angle, M4x10 Screw - Teknik Makina
Take advantage of the combination of a rigid 32 mm shank, broad compatibility with LNHU 1306 indexable inserts and a true 90° cutting angle for stable, repeatable corner turning; order the tool directly via Metav Werkzeuge or request application advice from the consultants. Eckmesserkopf T583TM — Teknik Makina corner turning head, 32 mm shank, 90° cutting angle The Eckmesserkopf T583TM is a compact corner turning head designed for the use of LNHU 1306 indexable inserts and engineered for precise 90° shoulder and corner machining in turning centres and bar-fed lathes Stable 32 mm shank for secure clamping Compatible with LNHU 1306 indexable inserts 90° cutting angle for accurate corner machining M4x10 Torx fastening, key size T15 Precision and rigidity for consistent corner turning A firm mechanical basis reduces vibration and improves surface finish: the combination of a 32 mm shank and a head diameter of Ø 100 mm provides the necessary stiffness for machining shoulders and external corners. The holder accepts LNHU 1306 indexable inserts, which are widely used in industry; this standard compatibility simplifies tool procurement and reduces changeover complexity. With a nominal cutting angle of 90°, the head ensures true shoulder profiles and reliable dimensional control, while the unit mass of 1.795 kg gives an indication of its robust construction without excessive inertia. Fast changeover and secure clamping for productive cycles Reliable fastening contributes directly to uptime: the holder is secured with an M4x10 Torx screw tightened with a T15 key, offering a repeatable clamping method that minimises setup variables. The design provides 8 cutting edges in its indexable arrangement, enabling multiple index positions and extending effective tool life before regrinding or replacement is required. These engineering choices result in shorter tool-change intervals and fewer interruptions in the production sequence, which improves overall process efficiency and cost per part. Versatile integration into workshop setups and application support The tool is specified for use with inserts from leading manufacturers, notably Walter, which broadens material and grade choices for applications ranging from steel to alloyed materials. Its compact overall length of 50 mm makes the head suitable for turret and fixed-tool post installations where access and clearance matter. For assistance selecting grades, coatings or insert geometries for specific materials, technical consultation is available; Metav Werkzeuge combines wide product choice with practical advice from Emmerich, ensuring supply reliability and fit-for-purpose recommendations. For further technical data or application queries, contact info@metav-werkzeuge.com or call +49 2822 7131930. Discuss specific machining requirements with Metav Werkzeuge to confirm suitability of the Teknik Makina T583TM and to arrange supply and delivery from Emmerich Technical Data Article number: T583TM Manufacturer: Teknik Makina Designation: Eckmesserkopf for LNHU 1306 Indexable Inserts ECLASS: 21181015 Facts Shank diameter: 32 mm Weight: 1.795 kg Head diameter: 100 mm Cutting edges: 8 Overall length: 50 mm Cutting angle: 90° Special features Compatible inserts: LNHU 1306 Compatible insert manufacturer: Walter Torx screw specification: M4x10 Torx key size: T15 Application: corner and shoulder external turning FAQ Can the head be mounted in standard 32 mm turrets? The holder features a 32 mm shank and is intended for mounting in toolholders or turrets accepting a 32 mm diameter shank; check turret clamping specifications for exact fit. Which indexable inserts fit this holder? The head is designed for LNHU 1306 indexable inserts; insert geometry and grade selection should follow the intended material and cutting conditions. What fastening hardware is required for assembly? A Torx screw of specification M4x10 is used with a T15 Torx key for secure fastening of the insert seat. Is the holder suitable for shoulder turning and external corner work? Yes; the 90° cutting angle and compact overall length make the tool appropriate for precise shoulder and corner machining tasks. How heavy is the tool and how does that affect machine balance? The unit weighs 1.795 kg; consideration of dynamic balance and overhang is advised when used on high-speed spindles or bar-fed applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head For LNXT 1306 Indexable Inserts, 90° Cutting Angle, 8 Inserts, M4x10 Torx - Teknik Makina
Robust corner turning with a 90° cutting geometry, a 32 mm shank and secure M4x10 Torx fastening ensures dependable repeatability and minimal set-up time; combined with compatibility for LNXT 1306 indexable inserts this head supports high uptime and consistent part quality. Order the corner tool head directly via Metav Werkzeuge or ask our consultants if needed. Corner Tool Head T676TM — Teknik Makina (90°) for LNXT 1306 Indexable Inserts Corner Tool Head T676TM offers a compact turning solution for CNC applications that require accurate right‑angle cuts using LNXT 1306 indexable inserts 90° cutting angle for precise corner turning 32 mm shank for secure toolholder mounting Compatible with LNXT 1306 indexable inserts M4x10 Torx fastening with T15 key required Achieve consistent corner geometry and shorter cycle times The right‑angle 90° cutting geometry is engineered to deliver repeatable corner profiles, reducing the need for rework and secondary operations. With a 32 mm shank and a compact overall length of 50 mm, the assembly stabilises the cutting motion and reduces vibration, which in turn prolongs insert life. The result is measurable production efficiency: fewer tool changes, predictable tolerances and a steady surface finish that supports lean machining workflows. Fast, secure clamping for improved process reliability A simple, robust fastening system — M4x10 Torx screw secured with a T15 key — enables quick insert seating and a firm mechanical connection between head and holder. Compatibility with Palbit‑manufactured inserts of type LNXT 1306 means replacement parts are widely available, and insert indexing is rapid, keeping machine downtime to a minimum. The head’s design prioritises clear access to the screw and predictable clamping force, which contributes directly to process stability and operator confidence. Built for integration into production environments Weighing 1.733 kg and featuring a 100 mm diameter contact profile, this turning head is designed for robust mounting while remaining compact enough for constrained toolstations. The eight cutting edges accommodate diverse cutting tasks and support a cost‑effective tool philosophy: multiple edges per insert extend service intervals and reduce per‑part tooling cost. Compatibility with standard indexable inserts simplifies inventory and helps maintain continuous throughput on mixed‑model production lines. Select the Teknik Makina corner tool head (T676TM) for reliable right‑angle turning and contact Metav Werkzeuge for tailored supply and application advice from their Emmerich facility Technical data Article number: T676TM Manufacturer: Teknik Makina Product name: Corner tool head For inserts: LNXT 1306 (for LNXT 1306 Indexable Inserts) Core measurements Shank diameter: 32 mm Overall length: 50 mm Diameter: 100 mm Cutting angle: 90° Number of cutting edges: 8 Weight: 1.733 kg Features & compatibility For LNXT 1306 indexable inserts Compatible with Palbit inserts Torx screw: M4x10 Torx key size: T15 Cutting geometry: corner (90°) FAQ Which insert type fits this turning head? The turning head accepts LNXT 1306 indexable inserts; compatibility with Palbit‑made LNXT 1306 inserts is specified for the Teknik Makina corner tool head (SKU T676TM). What fastening hardware is required for insert clamping? Clamping uses an M4x10 Torx screw; a T15 Torx key is required to achieve the specified clamping torque and secure the insert. Is this head suitable for heavy roughing operations? The head is designed for stable corner turning and repeatable right‑angle cuts; while robust, suitability for heavy roughing depends on machine rigidity and cutting parameters — the Teknik Makina head performs best where secure mounting and correct insert selection are observed. How does the weight affect toolholder dynamics? At 1.733 kg, the head adds mass to the tool assembly that helps damp vibration and stabilise cutting, which can improve surface finish and extend insert life when mounted correctly. Can the head be used with other insert manufacturers? The product is specified for LNXT 1306 inserts and listed as Palbit‑compatible; alternative manufacturers offering the same LNXT 1306 geometry are typically interchangeable, provided inserts match the LNXT 1306 specification. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Corner Tool Head for R390-17 Indexable Inserts L52mm Internal Cooling - Teknik Makina
Take advantage of the combination of robust compatibility, built-in coolant management and precise clamping to keep turning cycles stable and tool changes fast; order the tool via Metav Werkzeuge or contact their consultants for specification advice. Corner tool head T412-1TM — 100 mm diameter, internal coolant (Teknik Makina) A compact corner tool head engineered for lathe and turning operations, designed to accept R390-17 indexable inserts for efficient face and profile turning. 100 mm diameter tool head Internal coolant supply Compatible with R390-17 inserts (Sandvik) 90° cutting angle, 8 cutting edges Greater process reliability through proven compatibility and coolant control The tool head delivers consistent results thanks to its internal coolant channel and standardised interface. With a 100 mm diameter and support for R390-17 indexable inserts, the component is optimised for stable face and corner turning tasks in production environments. Internal coolant reduces heat at the cutting edge and improves chip evacuation, which extends insert life and stabilises cycle times. Designed for compatibility with Sandvik inserts, the unit minimises set-up complexity and supports predictable machining windows, ensuring reliable throughput for workshops and industrial cells. Secure clamping and serviceable fastenings for predictable maintenance Mechanical details focus on quick, repeatable tightening and straightforward maintenance: the clamping hardware uses a Torx T15 key and M3.5x8.5 screws for reproducible torque and secure insert retention. The compact overall length of 52 mm and a mount diameter of 32 mm provide a rigid connection to the toolholder, while the assembly mass of 1.665 kg contributes to vibration damping in demanding turning jobs. These attributes reduce the frequency of corrective adjustments and support a straightforward spare-parts strategy in a busy workshop. Designed to lift productivity and simplify tooling choices With 8 cutting edges and a 90° cutting angle, the head supports efficient material removal on shoulders and profiles while maintaining dimensional control. The standardised insert family and robust coolant routing enable longer uninterrupted runs and help to lower overall tooling cost per part through extended insert life. Built for repetitive industrial use, the component suits metalworking shops that require dependable tooling interfaces and clear performance expectations in both small-batch and continuous turning operations. Contact Metav Werkzeuge for expert advice on integration, delivery from Emmerich and specification support for the T412-1TM corner tool head with internal coolant Technical data Article number: T412-1TM SKU: T412-1TM Product type: Corner tool head Name: Corner tool head for R390-17 indexable inserts Brand: Teknik Makina Key measurements Diameter: 100 mm Total length: 52 mm Mount diameter: 32 mm Weight: 1.665 kg Cutting edges: 8 Cutting angle: 90° Torx key: T15 Torx screw: M3.5x8.5 Features & compatibility Internal coolant Compatible inserts: R390-17 Compatible insert manufacturer: Sandvik Intended use: Turning / face and corner operations Manufacturer: Teknik Makina FAQ Which insert type fits this tool head? The corner tool head accepts R390-17 indexable inserts; the design is compatible with inserts from Sandvik for straightforward procurement and tooling standardisation. Is coolant delivered to the cutting edge? Yes, the T412-1TM features internal coolant routing to the insert zone to improve cooling and chip evacuation during turning operations. What is the required tightening tool for the clamping screws? Screws use a Torx T15 key with fasteners sized M3.5x8.5, providing repeatable torque and secure insert retention. Which mounting interface does the head use? The head is specified with a 32 mm mount diameter for integration into compatible toolholders and turret systems. For which machining tasks is this head best suited? The component is designed for face and corner turning where a 90° cutting angle and multiple cutting edges support efficient material removal and dimensional control. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head for SNHU 1206 Indexable Inserts, 8 Cutting Edges, 32mm Shank - Teknik Makina
Take advantage of a combination of high rigidity and proven insert compatibility to increase cycle stability and reduce tool changes; the compact design and secure 32 mm shank ensure reliable clamping and consistent results — order via Metav Werkzeuge or consult the technical team for process matching. Corner milling head by Teknik Makina — 100 mm diameter, 8 cutting edges A robust corner milling head engineered for milling operations with SNHU 1206 indexable inserts, designed to deliver stable cutting performance in roughing and profile work. 100 mm diameter for heavy material removal Eight cutting edges for longer tool life 32 mm shank for secure toolholder clamping Compatible with SNHU 1206 Palbit inserts Maximised machining efficiency with a rigid cutting geometry The compact cutter body and substantial 100 mm diameter provide improved engagement stability, which directly translates into reduced vibration and more predictable cutting forces. With eight cutting edges, the tool head spreads wear over multiple edges, extending service intervals and lowering cost per cut. The 32 mm shank guarantees a secure clamping interface, reducing micro‑movement during heavy cuts and enabling higher material removal rates without sacrificing surface quality. Serviceability and insert compatibility reduce downtime Designed for SNHU 1206 indexable inserts, the tool accepts widely available Palbit plates for flexible grade selection and rapid replacement. The fixing uses an M4x10 Torx screw with a T15 key, allowing fast, repeatable insert changes and straightforward maintenance routines. This simplicity shortens tool changeover times on the shop floor and supports a lean production flow, while the modest overall length and balanced mass contribute to handling ease and predictable dynamic behaviour. Proven supply and application support for process reliability Sourced and dispatched through Metav’s European distribution hub, this machining head benefits from stringent quality checks and consistent stock handling to avoid last‑minute interruptions. As a component in a broader tooling strategy, the cutter head integrates into reliable setups that favour throughput and reproducibility. For application pairing, Metav’s specialists can advise on insert grades and holder selection to match material and cutting data, securing consistent part quality and repeatable cycle times. Contact Metav Werkzeuge for tailored application advice on Teknik Cutting Tools components — call +49 2822 7131930 or email info@metav-werkzeuge.com to confirm the right holder, insert grade and delivery options Technical Data Article number: T620TM Brand: Teknik Makina Product: Corner milling head For indexable inserts: SNHU 1206 Facts Diameter: 100 mm Cutting edges: 8 Shank diameter: 32 mm Total length: 50 mm Weight: 1.459 kg ECLASS: 21181015 Special features Torx screw: M4x10 Torx key size: T15 Compatible insert manufacturer: Palbit Suitable for: SNHU 1206 indexable inserts FAQ What insert type does this cutter accept? The cutter accepts SNHU 1206 indexable inserts; it is designed for standard SNHU geometries and is compatible with inserts from Palbit. What is the shank diameter and why is it important? The tool features a 32 mm shank, which ensures a secure fit in appropriately sized toolholders and improves rigidity during machining. How many cutting edges are available and what is the benefit? With eight cutting edges, wear is distributed across multiple edges, increasing the effective tool life and reducing frequency of changeovers. Which fastener and key are required for insert fastening? Insert clamping uses an M4x10 Torx screw tightened with a T15 wrench for quick and repeatable insert changes. What is the SKU for ordering and identification? The article number for ordering is T620TM, manufactured by Teknik Cutting Tools and distributed via Metav Werkzeuge. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head for WNGX 0806 Indexable Inserts L52mm Internal Coolant - Teknik Makina
Take advantage of the combination of 100 mm diameter rigidity, internal coolant, and compatibility with WNGX 0806 inserts for steady shoulder turning and reduced downtime; order the tool directly via Metav Werkzeuge or consult the team for specification support. Eckmesserkopf — 100 mm square-head with internal coolant (Teknik Makina) The Eckmesserkopf for WNGX 0806 indexable inserts is a 90° square-shoulder turning head designed for precision facing and shoulder operations in industrial turning applications. 100 mm diameter for stable cutting Internal coolant supply Compatible with Korloy WNGX 0806 inserts 90° cutting angle for square shoulders Greater stiffness for consistent machining results A larger-diameter tool body translates directly into reduced deflection and steadier cuts. With a 100 mm diameter and an overall length of 52 mm, this turning head offers improved rigidity, which helps maintain dimensional accuracy on shoulder faces and stepped parts. The 90° geometry ensures a true square shoulder finish, reducing the need for secondary operations and shortening cycle times. The relatively compact mass at 1.58 kg contributes to a stable rotating assembly without unnecessary overhang. Targeted cooling and fast insert maintenance Internal coolant delivery channels the cutting fluid precisely to the cutting edge, reducing thermal load and flushing chips away from the contact zone. The result is extended insert life and more consistent surface quality over long production runs. Designed for WNGX 0806 indexable inserts, with compatibility specified for Korloy inserts, the head supports changeovers with a standard M5x12 insert screw and a Torx T20 key interface, enabling quick and reproducible insert seating. The head accommodates eight indexed cutting positions, which provides economical use of each insert before replacement is required. Robust workflow integration and straightforward upkeep This tool head is intended for production environments where uptime and predictable performance matter. The combination of repeatable clamping via the M5x12 screw and Torx drive, together with internal coolant, reduces maintenance intervals and helps operators keep machines running longer between interventions. The design simplifies stocking and tool management by using a common insert format (WNGX 0806), ensuring readily available consumables. The SKU T778-1TM and the Teknik Makina build quality support integration into existing turret or toolblock setups with minimal rework. Contact Metav Werkzeuge for tailored application advice and to arrange supply directly from Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 for specification assistance and ordering support. Technical data SKU: T778-1TM Manufacturer: Teknik Makina ECLASS: 21181015 Product type: Eckmesserkopf Facts Diameter: 100 mm Overall length: 52 mm Weight: 1.58 kg Cutting angle: 90° Number of cutting positions: 8 Special features Internal coolant For WNGX 0806 indexable inserts Compatible insert manufacturer: Korloy Insert screw: M5x12 Torx key: T20 FAQ Which inserts are compatible with this head? The head accepts WNGX 0806 indexable inserts; Korloy-manufactured inserts are listed as compatible for this turning solution. Does the tool provide through-tool coolant? Yes — the Eckmesserkopf features internal coolant, which supplies cutting fluid directly to the tool tip to lower cutting temperatures and aid chip evacuation. What is the cutting geometry and its advantage? A 90° cutting angle delivers true square shoulders and clean faces, reducing secondary finishing and improving assembly fit where perpendicular surfaces are required. What fastening hardware is required for insert changes? Insert clamping uses an M5x12 screw with a Torx T20 drive for secure and repeatable seating. Can this head be used for heavy shoulder cutting? The 100 mm diameter body and compact 52 mm length increase stiffness for demanding shoulder operations; suitability will depend on machine rigidity and machining parameters. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head For WNMU 0705 Indexable Inserts, 90° Cutting Angle, M4x10 Screw - Teknik Makina
Take advantage of a robust, 90° corner insert head that combines compatibility with WNMU 0705 indexable inserts and a compact 32 mm arbor for reliable integration into existing tool setups; order the component directly via Metav Werkzeuge or consult the Metav specialists for application advice. Corner Insert Head – 90° cutting angle, Ø100 mm head, Teknik Makina The Corner Insert Head is an angled insert holder designed for precision corner and facing operations using WNMU 0705 indexable inserts. Compatible with WNMU 0705 indexable inserts 90° cutting angle for precise corner work Ø100 mm head diameter for stable cutting Clamped by M4x10 Torx screw, T15 key Stable, repeatable cuts with a 90° geometry The 90° cutting geometry delivers consistent cornering and facing, reducing setup variability on serial and single-part jobs. With a head diameter of Ø100 mm and a 32 mm shank, the assembly provides mass and rigidity where it matters, which helps to lower vibration and improve surface quality. This stability is particularly beneficial in mixed-production workshops that switch between short runs and medium batches, allowing predictable tool performance and fewer reworks. Fast insert changes and secure clamping to minimise downtime Designed for WNMU 0705 indexable inserts, the tool uses an M4x10 Torx screw secured with a T15 key, providing a compact, reliable clamping method that speeds up index and replacement cycles. Compatibility with ISCAR-style inserts simplifies stocking and reduces the number of special items required in the tool crib. Faster tool changes translate into higher effective machine availability and a clearer cost-per-part picture for production planning. Compact integration for flexible workshop use With a total length of 50 mm, a head diameter of 100 mm, and a weight of 1.342 kg, the holder is sized for straightforward integration into standard tool turrets and holders that accept a 32 mm arbor. The unit features eight cutting edges, enabling staged rotation of inserts to extend service intervals and reduce consumable waste. The compact form factor supports both constrained setups and retrofit scenarios where space and tool-overlap must be managed. For tailored advice on incorporating the Teknik Makina corner insert head into existing machining cells, contact Metav Werkzeuge — Metav’s consultants can review compatibility, recommend inserts, and arrange supply from Emmerich; eMail: info@metav-werkzeuge.com or call +49 2822 7131930 to discuss SKU T395TM and application requirements. Technical Data SKU: T395TM Manufacturer: Teknik Makina Product: Corner insert head for WNMU 0705 indexable inserts Brand designation: for WNMU 0705 Indexable Inserts Dimensions & Core Data Head diameter: 100 mm Total length: 50 mm Shank / arbor diameter: 32 mm Weight: 1.342 kg Cutting angle: 90° Cutting edges: 8 Compatibility & Features For WNMU 0705 indexable inserts Compatible with ISCAR inserts Torx screw: M4x10 Torx key size: T15 SKU reference: T395TM FAQ Which insert type fits this head? The corner insert head is designed for WNMU 0705 indexable inserts and is compatible with ISCAR-style WNMU plates, making insert sourcing straightforward for standard machining tasks. What clamping hardware is required for insert changes? Inserts are secured with an M4x10 Torx screw, tightened or released using a T15 key for reliable, repeatable clamping during changeover. Which arbor or holder accepts this head? The tool requires a holder or turret accepting a 32 mm shank, enabling direct mounting in systems designed for that arbor diameter and ensuring stable, concentric clamping. Is this head suitable for tight installation spaces? Yes; the compact 50 mm total length and relatively small footprint allow integration into constrained tool layouts while maintaining a Ø100 mm cutting face for stable engagement. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head LNMX 1510 L52mm Internal Coolant, 8 Cutting Edges - Teknik Makina
Take advantage of the 90° cutting geometry, internal coolant and proven compatibility with LNMX 1510 indexable inserts to improve cycle stability and reduce setup time; order the tool head directly via Metav Werkzeuge or request tailored advice from our consultants. 90° Corner Insert Holder Ø100 mm — for LNMX 1510 Indexable Inserts by Teknik Makina A robust 90° Corner Insert Holder engineered for precision turning with LNMX 1510 indexable inserts, combining compact dimensions and internal coolant for reliable chip control in industrial turning operations. Ø100 mm cutting head diameter Internal coolant for improved tool life Compatible with Korloy LNMX 1510 inserts Compact L52 mm overall length Consistent 90° geometry for repeatable turning The holder’s fixed 90° cutting angle yields predictable engagement and stable cutting forces, which improves process repeatability on serial components. Built around a Ø100 mm head and a short 52 mm overall length, the design reduces overhang and increases rigidity, translating into fewer vibrations and more consistent surface finish. This geometry is particularly beneficial when precise shoulder and face turning are required on medium-duty turning centres. Productivity gains through internal coolant and secure clamping Integrated internal coolant directs fluid close to the cutting edge, lowering cutting temperatures and extending insert life for longer unmanned runs. The clamping system uses M4x12.5 torx screws with a T15 drive for secure, repeatable insert fixation, enabling fast and reliable index changes. Together these features reduce non-productive time and help maintain stable cutting parameters across batch production. Compatibility and straightforward tool replacement Designed specifically for LNMX 1510 indexable inserts and optimised for Korloy grades, the tool head fits into established turning tool portfolios and is suited for workshops standardising on that insert family. The 32 mm shank interface provides a compact footprint while the unit’s weight of 1.644 kg gives a solid feel that aids damping during interrupted cuts. This balance of compatibility and mass supports easier integration into existing setups without complex adjustments. Serviceability and industrial-grade manufacturing The component is manufactured by Teknik Makina to industrial tolerances and keeps maintenance straightforward: insert changes are executed with common torx tooling and coolant channels can be flushed during routine service. The holder’s construction focuses on longevity and low-maintenance operation, which supports continuous production schedules and reduces the frequency of unscheduled interventions. For technical procurement or to source Teknik Cutting Tools components, contact Metav Werkzeuge for a tailored quotation and application advice at info@metav-werkzeuge.com or call +49 2822 7131930 — Metav’s specialists will assist with compatibility checks and fast supply. Technical data Article number: T378-1TM SKU: T378-1TM UID: T378-1TM ECLASS: 21181015 Numbers / Core technical data Head diameter: 100 mm Overall length: 52 mm Shank diameter: 32 mm Weight: 1.644 kg Cutting edges: 8 Cutting angle: 90° Torx screw: M4x12.5 Torx key: T15 Internal coolant: yes Special features / Compatibility For LNMX 1510 indexable inserts Compatible insert manufacturer: Korloy Product type: Corner insert holder Label: 100mm Eckmesserkopf LNMX 1510 L52mm mit Innenkühlung Manufacturer: Teknik Makina FAQ Which insert type fits this tool head? The holder is designed for LNMX 1510 indexable inserts, ensuring correct seat geometry and stable clamping for that family of inserts. Is internal coolant incorporated and how does it help? Yes — the internal coolant channel supplies cutting fluid close to the edge, which reduces temperature, improves chip control and extends insert life in continuous operations. What fastening hardware is required for insert clamping? Insert clamping uses M4x12.5 torx screws tightened with a T15 torx key to ensure secure and repeatable fixation. Can this holder be used with Korloy inserts? Compatibility with Korloy LNMX 1510 grades is confirmed; the seat and clamping geometry are matched for reliable use with those inserts. What are the key dimensions that affect rigidity? The Ø100 mm head and L52 mm overall length minimise overhang, improving rigidity and damping compared with longer tooling extensions. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak. No:9, Selcuklu/KONYA/TURKEY; Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Head XEKT 1904 L63mm Internal Coolant, 6 Inserts, T15 Torx - Teknik Makina
Take advantage of the combination of robust construction, precise 90° shoulder geometry and integrated coolant for reliable cycle times; order the component directly through Metav Werkzeuge or consult our sales engineers for application advice. Corner tool head (Eckmesserkopf) — 100 mm diameter, internal coolant, Teknik Makina A Corner tool head for XEKT 1904 indexable inserts, engineered for 90° shoulder machining and equipped with internal coolant for improved tool life. 100 mm diameter, 90° cutting angle Internal through-coolant system Compatible with XEKT 1904 Korloy inserts Total length 63 mm, robust mass Improved cycle times for shoulder machining The compact indexable head delivers a consistent 90° cutting geometry that reduces set-up time and simplifies programme calculation. The 100 mm diameter and solid construction provide stability during interrupted cuts, while the six available cutting edges provide extended on-machine life. For production environments where repeatability and throughput matter, this insert carrier translates to fewer tool changes and more productive spindle hours. The design is suitable for a wide range of turning and profiling operations where a defined shoulder needs to be produced quickly and accurately. Controlled coolant flow to extend insert life Integrated internal coolant directs cutting fluid straight to the cutting zone, flushing away chips and reducing heat at the edge. This targeted cooling lowers flank wear and supports more consistent cutting forces, which in turn helps maintain dimensional accuracy across batches. When paired with XEKT 1904 indexable inserts from Korloy, the coolant feed improves chip control and reduces the risk of built-up edge, making longer feed rates and higher metal removal possible without sacrificing surface finish. Practical fastening and serviceability for workshop efficiency Fastening uses a T15 Torx drive and M4x8.5 screw for secure, repeatable clamping of the insert seat, allowing quick index changes and minimal downtime. The tool head’s total length of 63 mm and weight of 1.952 kg give a low centre of gravity for stable tool engagement in heavier cuts. Clear mechanical interfaces and widely available Torx tooling mean maintenance is straightforward, and stock levels can be managed without bespoke parts. These practical details reduce assembly complexity and help standardise tooling across the workshop. For tailored application guidance and to secure supply, contact Metav Werkzeuge in Emmerich — info@metav-werkzeuge.com or call +49 2822 7131930 for direct ordering and technical consultation on the Teknik Makina corner tool head (SKU T369TM) Technical data Article number: T369TM ECLASS: 21181015 Product type: Corner tool head Label: 100mm corner tool head XEKT 1904 L63mm with internal coolant Manufacturer: Teknik Makina Facts Diameter: 100 mm Total length: 63 mm Weight: 1.952 kg Cutting edges: 6 Cutting angle: 90° Torx key: T15 Torx screw: M4x8.5 Special features Internal coolant: yes Compatible with XEKT 1904 indexable inserts Compatible insert manufacturer: Korloy Application: 90° shoulder/face machining FAQ Which inserts fit this tool head? The corner tool head is designed for XEKT 1904 indexable inserts and is compatible with Korloy-manufactured XEKT 1904 inserts; the SKU is T369TM. Does the tool head provide internal coolant? Yes, the tool head features an internal through-coolant feed that delivers lubricant directly to the cutting edge for improved tool life and chip control. What is the cutting geometry and typical use case? The head provides a 90° cutting angle suited to shoulder and face turning where square shoulders and accurate axially aligned faces are required. How is the insert secured and serviced? Inserts are secured with an M4x8.5 screw using a T15 Torx drive, enabling rapid index changes and straightforward workshop maintenance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Holder For SPMT 1204 Indexable Inserts, 32mm Shank, 8 Cutting Edges, M5x12 Fixing - Teknik Makina
Take advantage of a compact turning head that combines stable cutting performance with straightforward maintenance: the design delivers consistent seating for SPMT 1204 indexable inserts and a large Ø100 mm head for improved rigidity, while the 32 mm shank enables secure toolholder integration — order the component directly via Metav Werkzeuge or request specialist guidance from our consultants. Corner turning head T653TM – Indexable insert turning head, Ø100 mm, for SPMT 1204 (Teknik Makina) A robust Corner turning head engineered for turning applications with SPMT 1204 indexable inserts, providing a compact solution for stable cutting and frequent indexing Compatible with SPMT 1204 indexable inserts 100 mm head diameter for stable cutting 32 mm shank for secure toolholder fit Eight cutting edges for extended use Consistent cutting stability that reduces downtime The Corner turning head T653TM is designed to sustain precise tool contact throughout each cut. The Ø100 mm head diameter increases the moment of inertia at the cutting zone, which reduces vibration and supports a steady machining process. With 8 cutting edges, the holder enables multiple index operations on a single insert, lowering replacement frequency and cutting overall tooling costs while improving uptime in batch and serial production. Secure clamping and repeatable seating for reliable cycles A engineered clamping solution gives repeatable seating: the tool accepts a 32 mm shank for rigid mounting in standard toolholders and is fastened with a Torx M5x12 screw driven by a T20 key for reliable tightening without cam‑out. The result is a stable interface that minimises micro‑movement at the insert seat, translating into consistent surface quality and longer insert life for repetitive turning tasks. Compact geometry that supports efficient toolchanges With an overall length of 50 mm, the head occupies minimal axial space while still providing the required clearance for organised tooling setups. The compatibility with indexable inserts such as SPMT 1204 means insert changes are quick and do not require regrinding, which helps workshops maintain throughput and reduce operator time spent on tool maintenance. This compact, indexable approach supports both short runs and larger production series. Practical integration into machining centres and workshops The T653TM is suitable for industrial turning operations where tool stability and fast indexability are priorities. At a weight of 1.786 kg the head contributes to a solid tool assembly that assists in dampening cutting forces. Supplied components and fasteners follow common workshop standards, enabling straightforward inventory management and interchangeability across compatible holders from the same tool family. For reliable integration of Teknik Makina components such as the T653TM corner turning head, contact Metav Werkzeuge for tailored supply and technical advice from Emmerich. Technical data Article number: T653TM Manufacturer: Teknik Makina Suitable for indexable inserts: SPMT 1204 Dimensions & weight Head diameter: 100 mm Shank diameter: 32 mm Overall length: 50 mm Weight: 1.786 kg Cutting edges: 8 Assembly & fastening Torx screw: M5x12 Torx key size: T20 For SPMT 1204 indexable inserts FAQ Which indexable inserts fit this turning head? The corner turning head T653TM is compatible with SPMT 1204 indexable inserts, designed for simple indexing and reliable seating in turning operations. What shank diameter is required for mounting? A 32 mm shank is required for correct mounting of the T653TM; the diameter ensures a stable connection with standard toolholders. How many usable cutting edges are available before replacement? The holder supports 8 cutting edges, enabling multiple index positions per insert and reducing the frequency of full insert replacements. Which screw and key are used for insert clamping? Clamping is performed with a Torx M5x12 screw and requires a T20 key for secure tightening and repeatable seating. Is this head suitable for industrial machine tools? Yes; the T653TM is intended for industrial turning applications where indexable inserts and a compact, rigid tool holder improve productivity and repeatability. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Holder for TPKN 1603-2204 Indexable Inserts, 90° Cutting Angle, M8x24 Screw - Teknik Makina
Take advantage of a compact, rigid tool head that combines compatibility with TPKN 1603–2204 indexable inserts and a 90° cutting angle for reliable shoulder turning — order directly via Metav Werkzeuge or consult our specialists for application guidance. Corner tool head T130TM — indexable head for TPKN 1603–2204, 90° cutting angle (Teknik Makina) Corner tool head T130TM for precision turning and facing, designed to accept TPKN 1603–2204 indexable inserts and deliver consistent square-shoulder results on standard toolposts Compatible with TPKN 2204 inserts 90° cutting angle for square shoulders 32 mm shank diameter for secure clamping M8x24 hex screw, requires 5 mm Allen key Stable mounting for predictable machining outcomes A robust construction and a 32 mm shank ensure the holder remains rigid under load, which reduces vibration and improves finish quality. The head’s 100 mm diameter and mass of 1.398 kg provide mechanical stability for interrupted cuts and finish turning alike. The 90° cutting angle is optimised for producing square shoulders with minimal tool deflection, helping to maintain dimensional accuracy across production runs and extending insert life through reduced chatter. Faster index changes and fewer setup steps Compatibility with TPKN 1603–2204 indexable inserts simplifies insert standardisation across a workshop and shortens changeover times. Fixing is achieved with an M8x24 screw secured by a 5 mm Allen key, enabling quick, repeatable clamping without specialised fixtures. Clear mechanical engagement and a simple fastening arrangement reduce the risk of incorrect seating, which means less rework and a more efficient process flow on the shop floor. Compact design that integrates into existing workflows With an overall length of 52 mm and a head configured for up to five cutting positions, the tool head supports versatile orientations in confined toolpost spaces while maintaining cutting performance. The combination of compactness and mechanical mass yields predictable cutting forces, so cycle times can be kept consistent without sacrificing surface quality. This design is suitable for production and jobbing environments where space, repeatability and uptime are priorities, supporting stable, long-term operation. Contact Metav Werkzeuge for tailored application advice or a specification check for the Teknik Makina corner tool head T130TM — our specialists in Emmerich can confirm suitability for specific machining tasks and assist with integration into existing toolholding systems. Technical data Article number: T130TM Manufacturer: Teknik Makina Designation: Corner tool head (Eckmesserkopf) for TPKN 1603–2204 indexable inserts SKU: T130TM Facts Weight: 1.398 kg Head diameter: 100 mm Overall length: 52 mm Shank diameter / clamping diameter: 32 mm Number of cutting positions: 5 Cutting angle: 90° Special features Compatibility: TPKN 1603–2204 indexable inserts Fastening: M8x24 hex screw Required tool: 5 mm Allen key Suitable for shoulder turning and facing operations FAQ Which inserts fit this corner tool head? The corner tool head T130TM is specified for use with TPKN 1603–2204 indexable inserts and supports the insert geometries listed for that designation. What is the required clamping interface? Mounting uses a 32 mm shank; the fixing screw is M8x24, tightened with a 5 mm Allen key for secure clamping. Is the unit suitable for square-shoulder machining? Yes, the 90° cutting angle and rigid head construction make the T130TM appropriate for producing square shoulders with repeatable accuracy. How many index positions are available on the head? The head offers five cutting positions, allowing multiple index turns of the insert before replacement is required. Can the tool head be integrated into existing toolposts? Integration is straightforward where a 32 mm shank interface is supported; ensure correct clamping and alignment when fitting the T130TM to preserve accuracy. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Tool Holder For WNGX 0806 Indexable Inserts, 90° Cut Angle, M5x12 Screw - Teknik Makina
Take advantage of a compact, 90° cutting-angle head that accepts WNGX 0806 indexable inserts and a stout 32 mm shank for improved rigidity; combine precise shoulder turning and reliable clamping with fast insert changes — order via Metav Werkzeuge or consult our specialists for application advice. Corner tool head (Eckmesserkopf) by Teknik Makina — 90° cutting angle, for WNGX 0806 indexable inserts Corner tool head (Eckmesserkopf) designed for right-angle turning and shoulder work on CNC lathes, compatible with WNGX 0806 indexable inserts and built for repeatable set-ups Suitable for WNGX 0806 indexable inserts 90° cutting angle for precise shoulder turning 32 mm shank diameter for high rigidity Torx fastening M5x12 with T20 key Consistent shoulder quality from the 90° geometry The 90° cutting angle provides a defined contact geometry that helps produce repeatable shoulders and faces with minimal re‑work. Using a right‑angle head designed for the WNGX family ensures the insert edge engages material squarely, which reduces lateral tool movement and improves dimensional stability. For production runs where consistent shoulder finish matters, the controlled geometry contributes directly to cycle‑time predictability and fewer scrapped parts. The compact form and clear edge orientation make toolpath programming and set‑up verification straightforward on standard CNC turning centres. Robust construction that reduces vibration and downtime A 32 mm shank combined with a 100 mm diameter head and an overall length of 52 mm delivers a compact, rigid assembly that resists chatter during heavy cuts or interrupted operations. The solid mass (weight 1.58 kg) stabilises the toolholder on the turret, improving surface finish and prolonging insert life. Fast, reliable clamping is achieved via an M5x12 Torx screw secured with a T20 key; this straightforward fixation reduces maintenance time and supports quick insert replacement during shift changes. The result is a durable turning solution geared to maintain throughput in small and medium series production. Compatibility, serviceability and shop‑floor benefits Engineered for WNGX 0806 indexable inserts and compatible with Korloy supply, the head simplifies tooling logistics for workshops standardising on that insert family. The Torx‑type fastening facilitates repeatable torque application and secure clamping, while the architecture supports up to 8 cutting edges, enabling economical use of insert geometry where applicable. For machinists, the assembly means fewer different holders to manage, quicker set‑ups and reduced tool change frequency — practical advantages that help maintain uptime and predictable production flow. Choose Teknik Makina quality through Metav Werkzeuge: request tailored application guidance or a procurement proposal referencing SKU T778TM and secure the right tool for consistent, industrial turning tasks Technical Data Article number: T778TM Manufacturer: Teknik Makina Product name: Corner tool head (Eckmesserkopf) for WNGX 0806 indexable inserts Fastening screw: M5x12 Torx Torx key size: T20 Facts Diameter: 100 mm Shank diameter (D): 32 mm Overall length: 52 mm Weight: 1.58 kg Cutting angle: 90° Number of cutting edges: 8 Special features For WNGX 0806 indexable inserts Compatible with Korloy inserts Torx fastening for repeatable clamping Compact design for CNC turning centres Brand: Teknik Makina FAQ Which inserts are compatible with this tool head? The corner tool head accepts WNGX 0806 indexable inserts; the design is compatible with Korloy‑specification inserts for that size. How is the insert secured in the holder? Insert clamping is achieved via an M5x12 Torx screw, tightened using a T20 key to ensure repeatable clamp force and secure seating. Is the tool head suitable for heavy cutting or interrupted cuts? The compact geometry, 32 mm shank and mass (approx. 1.58 kg) provide rigidity suited to demanding turning jobs, helping to reduce vibration during heavier or interrupted cuts. What are the main dimensional features to verify on the machine turret? Check the shank diameter (32 mm) and overall length (52 mm) to ensure correct turret fit and adequate clearance for the 100 mm head diameter. Can the tool head be used for precise shoulder facing? Yes, the 90° cutting angle is intended to produce consistent shoulders and faces, supporting precise finishing routines on the lathe. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head 90° For R390-1806 Indexable Inserts, M4x11 Torx T15 - Teknik Makina
Take advantage of a solid combination of precise 90° geometry and stable 32 mm mounting for consistent shoulder turning and repeatable results; the robust design with Torx M4x11 fastening supports safe clamping and simple maintenance. Order the tool through Metav Werkzeuge or consult our specialists for application-specific setup. Corner tool head T428TM – 90° holder for R390-1806 indexable inserts by Teknik Makina The Corner tool head T428TM is a compact 90° toolholder engineered for shoulder turning and profiling with R390-1806 indexable inserts, suited to medium-duty lathe work and workshop environments 90° cutting angle for precise corner cuts Compatible with R390-1806 Sandvik inserts 32 mm shank diameter for stable mounting Torx M4x11 fastening, T15 key Consistent shoulder turning through rigid mounting The design delivers stable clamping and repeatable results by combining a 32 mm shank with a robust body and secure Torx fastening. This rigid interface reduces vibration and improves surface finish when performing shoulder and face-turning operations, so cycle-time variations are minimised and tool life becomes more predictable. The specification includes a 100 mm diameter reference and an overall length of 52 mm, which contributes to compact tool overhang and better control of cutting forces. Easy integration with common indexable inserts for efficiency Compatibility with R390-1806 indexable inserts from Sandvik allows straightforward tool management and inventory alignment across shops that already use this insert family. The holder accommodates the standard insert geometry and is secured with an M4x11 Torx screw (T15), enabling fast insert changes and low downtime. With seven cutting edges specified on the head, the component is optimised for multi-edge engagement patterns that maintain cutting stability in interrupted cuts and profiling tasks. Measurable benefits for workshop productivity Engineered for reliable everyday use, the component is specified with a weight of 1.595 kg, providing enough mass to dampen chatter without excessive load on the turret. The 90° cutting angle simplifies setup for shoulder operations and reduces the need for secondary finishing passes, improving throughput. Where process reproducibility and predictable tool behaviour are priorities, this toolholder is designed to be integrated into standard toolkits and CNC turret systems without lengthy adaptation. For robust 90° shoulder turning and dependable insert compatibility, contact Metav Werkzeuge to discuss Teknik Makina's T428TM and ensure fast supply from our Emmerich stock — email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T428TM Manufacturer: Teknik Cutting Tools Compatible inserts: R390-1806 Facts Diameter: 100 mm Shank diameter: 32 mm Overall length: 52 mm Weight: 1.595 kg Cutting angle: 90° Cutting edges: 7 Special features Torx screw M4x11 Torx key size T15 For R390-1806 indexable inserts Compatible with Sandvik insert range FAQ What insert type does this holder accept? The holder is specified for R390-1806 indexable inserts and is compatible with the Sandvik insert family named for that designation. Is the tool suitable for shoulder turning on a CNC lathe? Yes, the T428TM corner tool head is designed with a 90° cutting angle and a 32 mm shank to provide the rigidity required for reliable shoulder turning on turret-equipped lathes. Which fastening and key size are required to secure inserts? Insert clamping is achieved with a Torx M4x11 screw; the corresponding key size is T15, ensuring secure and repeatable fastening. How does the toolholder improve surface finish and tool life? The combination of a compact overall length, 32 mm mounting diameter and robust construction reduces vibration and tool deflection, which improves surface finish and supports longer insert life. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head 90° For XOMX 1806 Indexable Inserts, 8 Cutting Edges, M4.5x11 Torx - Teknik Makina
Benefit from the combination of a 90° cutting angle and a sturdy 32 mm shank for repeatable, high-stability turning operations; the compact 52 mm overall length keeps set-up simple while the SECO-compatible insert interface reduces tooling changes. Order the Angle turning head directly via Metav Werkzeuge or contact their consultants for integration advice. Angle turning head T525TM — 90° cutting angle, 32 mm shank (Teknik Makina) The Angle turning head T525TM is a right-angle indexable insert holder designed for turning and facing operations with XOMX 1806 indexable inserts, combining rigid mounting and standardised fastening for reliable daily use. 90° cutting angle for accurate facing 32 mm shank for stable clamping Compatible with XOMX 1806 inserts by SECO Robust Ø100 mm body, 8 cutting edges Precision and compatibility for consistent turning The 90° cutting angle and indexable insert interface deliver predictable cutting geometry that supports consistent surface finish and dimensional control across batches. Fitted for XOMX 1806 indexable inserts, the head accepts industry-standard carbide plates (SECO-compatible), which simplifies procurement and keeps changeover times low. For less technical readers: an indexable insert is a reversible carbide plate that locates into the holder so that a worn edge can be rotated or replaced quickly—this reduces downtime and maintains cutting performance without regrinding the tool. Secure clamping with straightforward serviceability A substantial 32 mm shank and a body diameter of Ø100 mm provide the rigidity needed for heavy contact forces during facing or shoulder turning. Fastening is by an M4.5x11 Torx screw secured with a T15 key, a common standard that ensures repeatable clamping torque and simple maintenance procedures. The combination of solid mounting and a compact 52 mm overall length keeps the tool close to the toolpost, reducing deflection. The item’s mass of 1.661 kg contributes to vibration damping, which supports longer insert life and steadier surface results. Designed to streamline workshop workflows The head’s accommodation for XOMX 1806 inserts and its SECO compatibility mean fewer special parts in stock and straightforward replacement logistics. The configuration with eight cutting edges on the assembly reduces frequency of full-tool exchanges, while the compact footprint supports machines with limited turret clearance. A clear classification code (ECLASS 21181015) aids purchasing and inventory systems. If there is uncertainty about machine fitment or insert grade selection, Metav Werkzeuge can advise on the optimal insert geometry and clamping sequence for the intended application. For tailored technical advice on integrating the Teknik Makina angle turning head T525TM into existing tool systems, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or +49 2822 7131930. Technical data SKU: T525TM Manufacturer: Teknik Makina Product designation: Angle turning head (Eckmesserkopf) Compatible inserts: XOMX 1806 Compatible insert manufacturer: SECO ECLASS: 21181015 Facts Shank diameter: 32 mm Body diameter: Ø100 mm Cutting angle: 90° Number of cutting edges: 8 Overall length: 52 mm Weight: 1.661 kg Torx screw: M4.5x11 Torx key size: T15 Special features 90° cutting geometry SECO-compatible indexable insert interface Designed for XOMX 1806 indexable inserts Files available: 62de7ef933927e49dbf327a1, 62de7e74a9cff922f4703d37 FAQ Which insert type is required for this head? The head is designed for XOMX 1806 indexable inserts; it is compatible with SECO variants that match the XOMX 1806 geometry. What shank diameter and mounting are used? Mounting uses a 32 mm shank; the compact 52 mm overall length keeps the turning head close to the toolpost for improved rigidity. Is the cutting angle suitable for facing and shoulder work? The 90° cutting angle makes the head well suited to facing and square shoulder turning, providing a true right-angle cutting geometry. What fastening hardware is required for insert clamping? Insert and head fastening uses an M4.5x11 Torx screw, tightened with a T15 key for secure and repeatable clamping. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head for ADKT 1505 Indexable Inserts L52mm With Internal Coolant - Teknik Makina
Benefit from a rigid 100 mm construction, integrated internal coolant and broad compatibility with ADKT 1505 indexable inserts for reliable 90° profiling and reduced downtime. Order or request application advice directly via Metav Werkzeuge if additional machining data is required. Eckmesserkopf – 100 mm corner tool head with internal coolant (Teknik Makina) A Eckmesserkopf for ADKT 1505 indexable inserts, engineered for square-edge turning and profiling with built-in coolant supply to support stable production. 100 mm diameter for robust cutting Internal coolant for improved chip evacuation Compatible with ADKT 1505 inserts (ISCAR) Eight cutting positions, 90° cutting angle Increased process stability through rigid design and coolant delivery The robust 100 mm body reduces deflection during heavy profiling, delivering a steady cutting geometry and predictable tool life. Built-in internal coolant directs lubricant and coolant close to the cutting edge, which lowers thermal load, improves chip control and prolongs insert performance. These factors translate into fewer tool changes and consistent batch tolerances, making the head well suited to production environments where repeatability and cycle-time savings matter. The combination of rigidity and targeted cooling supports higher material removal rates without compromising surface finish. Quick set-up and secure clamping for uptime optimisation Set-up is straightforward: the clamping uses a Torx T15 drive and M4 x 10 fastening screws for secure insert retention and repeatable seating. The toolholder’s eight cutting positions mean multiple indexable lives per insert arrangement, reducing machine downtime for insert changes. Engineers benefit from a clear service routine: fast access to screws and a compact overall length of 52 mm allow confined [workpiece-to-tool] layouts to be addressed without complex reprogramming. The compact mass (approx 1.546 kg) balances rigidity with manageability during tool changes and tool magazine loading. Broad compatibility and application-focused advantages Compatibility with ADKT 1505 inserts and proven suitability for inserts from ISCAR simplifies purchasing and stocking decisions, as common insert geometries and grades can be used. A true 90° cutting angle supports square shoulder machining and clean-face transitions, reducing secondary finishing operations. Where consistent edge definition and rapid chip evacuation are required — for example, in medium- to high-volume turning and profiling tasks — this indexable head offers a pragmatic route to higher productivity while keeping inventory and set-up complexity low. The toolholder body ensures predictable results across repeated cycles and diverse batch sizes. Contact Metav Werkzeuge for tailored application advice and supply of the Teknik Makina corner tool head with internal coolant; email info@metav-werkzeuge.com or call +49 2822 7131930 Technical data SKU: T207-1TM Article: Eckmesserkopf for ADKT 1505 Indexable Inserts Manufacturer: Teknik Makina ECLASS: 21181015 Core specifications Diameter: 100 mm Total length: 52 mm Weight: 1.546 kg Cutting angle: 90° Cutting positions: 8 Torx key: T15 Torx screw: M4 x 10 Special features Internal coolant Compatible with ADKT 1505 indexable inserts Compatible insert manufacturer: ISCAR Suitable for square-edge turning and profiling FAQ Which insert type fits this head? The head accepts ADKT 1505 indexable inserts; it is designed for common ADKT geometries and compatible with inserts from ISCAR. Is the cooling internal or external? Internal coolant is integrated into the head to deliver fluid directly to the cutting zone, enhancing chip control and insert life. How many cutting positions are available before regrinding or replacement? The design provides eight cutting positions, enabling multiple indexings and extended service intervals before insert replacement. What is the recommended fastening method for the inserts? Inserts are secured using the supplied M4 x 10 fastenings with a Torx T15 driver to ensure repeatable clamping and stable seating. Can this head produce true 90° shoulders? Yes, the 90° cutting angle is intended for square-shoulder turning and clean-face transitions, reducing secondary finishing needs. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head for ADKT 1706 Indexable Inserts L63mm Internal Coolant, 8 Cutting Edges, T15 Torx - Teknik Makina
Take advantage of the stable 100 mm diameter and built‑in coolant to boost throughput while reducing insert wear; reliable compatibility with ADKT 1706 Korloy inserts ensures straightforward integration into existing turning stations — order or request advice via Metav Werkzeuge for fast supply and technical guidance. Corner tool head for ADKT 1706 indexable inserts — 100 mm diameter, internal coolant (Teknik Makina) A corner tool head for ADKT 1706 indexable inserts designed for robust turning operations and reliable coolant delivery in workshop and production settings. 100 mm diameter for stable machining Internal coolant for optimised chip evacuation Compatible with ADKT 1706 Korloy inserts 8 cutting edges, 90° cutting angle Optimised stability and chip control for higher productivity The compact turning head delivers consistent performance through its 100 mm diameter and compact 63 mm overall length, balancing rigidity with accessibility at the toolpost. Thanks to the 8 cutting edges, the geometry distributes cutting forces to reduce vibration and maintain surface quality; the 90° cutting angle provides predictable engagement for shoulder and facing operations. This results in fewer reworks and a more reliable production rhythm, especially on medium‑ to heavy‑duty turning tasks. Coolant-fed design that extends insert life and improves finish Integrated internal coolant directs lubricant precisely to the cutting zone, lowering cutting temperatures and flushing chips away from the insert rake. The focused coolant supply extends the life of ADKT 1706 inserts and helps secure consistent part finish across longer runs. Compatibility with Korloy inserts and standard fastening using a T15 Torx drive and M4x10 screws simplifies maintenance and insert changes, reducing machine downtime and tooling complexity on the shop floor. Simple integration and serviceable construction for production use Installation and service follow standard workshop procedures: the head’s footprint and mounting dimensions suit common toolholders, while the modest 1.76 kg mass keeps loading predictable during indexing and tool changes. Fasteners with T15 interface ensure repeatable clamping torque and secure seat for each insert, supporting stable cutting conditions. The design prioritises ease of replacement and inventory harmonisation, enabling maintenance teams to manage fewer part numbers without compromising cutting performance. For procurement or technical clarification on the Teknik Cutting Tools corner tool head with internal coolant, contact Metav Werkzeuge for expert advice and reliable supply from Emmerich. Technical data Article number: T592-2TM Label: 100mm Eckmesserkopf ADKT 1706 L63mm mit Innenkühlung Product type: Corner tool head Manufacturer: Teknik Makina Facts Diameter: 100 mm Overall length: 63 mm Weight: 1.76 kg Cutting edges: 8 Cutting angle: 90° Internal coolant: yes Torx key: T15 Torx screw: M4x10 ECLASS: 21181015 Special features Compatible with ADKT 1706 indexable inserts Suited for Korloy insert range Compact construction for tight toolpost clearances Designed for predictable clamping and easy insert changes FAQ Is this head compatible with standard ADKT 1706 inserts? Yes. The corner tool head is designed for use with ADKT 1706 indexable inserts and specifically accommodates Korloy‑specification inserts. Does the tool head support internal coolant lines? Yes. The integrated internal coolant feature channels fluid to the cutting zone to improve tool life and surface finish. Which fastening tools are required for insert changes? Insert and clamp screws use a T15 Torx interface and M4x10 screws for secure, repeatable clamping during maintenance. What advantages does the 100 mm diameter provide? A 100 mm diameter increases rigidity at the cutting edge, improving stability and enabling more consistent surface quality in turning applications. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head for ANKX 0706 Indexable Inserts, 90° Cutting Angle, 7 Edges, 52mm Overall Length - Teknik Makina
Take advantage of the combination of precise 90° cutting geometry, stable Ø100 mm head engagement and straightforward mounting with a 32 mm shank for reliable shoulder turning and profiling. Order the component via Metav Werkzeuge or consult their specialists for application advice and fast supply. Corner tool head T448TM — 90° corner turning head, Ø100 mm, for ANKX 0706 indexable inserts (Teknik Makina) Corner tool head T448TM designed for right‑angle shoulder turning and external profiling with indexable inserts in industrial turning operations 90° cutting angle for precise shoulder turning Ø100 mm head diameter for stable engagement Compatible with ANKX 0706 indexable inserts 32 mm tool holder shank for secure mounting Torx M5x12 screw, T20 key specification Reliable shoulder and profile turning with defined geometry The Corner tool head T448TM brings a 90° cutting angle that is specifically suited to accurate shoulder and profile operations. The combination of a Ø100 mm head and 7 cutting edges ensures consistent contact and repeatable results when used with compatible turning inserts. This geometry reduces the need for manual rework, improving process predictability and supporting repeatable part quality in serial production. Fast, consistent mounting and insert compatibility Mounting is straightforward thanks to the 32 mm shank and the defined fastener specification (M5x12 Torx screw, T20 key). The head accepts ANKX 0706 indexable inserts and is noted as compatible with ISCAR insert types, enabling quick replacement and standardised tool setups. Reduced changeover complexity translates to shorter downtime and simpler tool inventory management on the shop floor. Built for stable engagement and vibration damping At a mass of 2.029 kg, the turning head provides inherent stability that helps dampen vibration during cutting, which in turn benefits surface finish and tool life. The robust construction contributes to consistent cutting conditions across batches, so machines and operators can maintain steady feed rates and achieve predictable machining performance with fewer process interruptions. Practical application and workshop integration Designed for external turning, shoulder machining and contour work, the head integrates with conventional lathe tool posts that accept a 32 mm holder. The use of standardised indexable inserts keeps consumables familiar across operations, simplifying procurement and lowering the learning curve for operators. When planning tool layouts, consider the 90° geometry for operations where square shoulders and precise transitions are required. Select the Teknik Makina T448TM corner tool head for dependable shoulder turning — contact Metav Werkzeuge in Emmerich for application guidance and swift supply at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: T448TM Manufacturer: Teknik Makina Product name: Corner tool head (Eckmesserkopf) Description: for ANKX 0706 indexable inserts Core specifications Diameter: 100 mm Shank diameter: 32 mm Total length: 52 mm Weight: 2.029 kg Cutting angle: 90° Number of cutting edges: 7 Features Compatible with ANKX 0706 indexable inserts Suitable for ISCAR insert types Torx screw: M5x12 Torx key specification: T20 FAQ Which indexable inserts fit this turning head? The turning head accepts ANKX 0706 indexable inserts; compatibility with ISCAR insert types is indicated for the Corner tool head T448TM. What fixing hardware is specified for mounting? Mounting and clamping use a Torx M5x12 screw with a T20 Torx key, specified for the T448TM to secure the insert head reliably. What is the benefit of the 90° cutting angle? A 90° cutting angle enables precise shoulder formation and square transitions, making the head suitable for accurate external profiling and shoulder turning with consistent tolerances. Is the shank size standardised for typical lathe tool posts? Yes — the 32 mm shank diameter is a common holder size, allowing the Corner tool head T448TM to be mounted in tool posts designed for 32 mm tool holders. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Corner Turning Head for AP-- 1604 Indexable Inserts Internal Coolant, 90° - Teknik Makina
Combining the 100 mm diameter body with internal coolant and compatibility with AP--1604 indexable inserts delivers stable cutting and efficient chip control; order via Metav Werkzeuge or consult their technical advisors for application support. Corner tool head for AP--1604 indexable inserts — 100 mm diameter, internal coolant (Teknik Makina) Corner tool head for AP--1604 indexable inserts is a compact machining head designed for precision turning and facing operations where coolant-fed cutting and repeatable set-ups are required. 100 mm diameter for stable cutting Internal coolant for improved chip evacuation Fits AP--1604 indexable inserts (Korloy) 52 mm overall length for compact set-ups Seven cutting edges, 90° cutting angle Greater process stability with coolant-fed cutting The robust 100 mm body provides increased rigidity which reduces chatter in interrupted and finishing cuts. With internal coolant directed to the cutting zone, thermal loads are lowered and tool life is extended through improved lubrication and chip removal. This translates into steadier surface finishes and fewer reworks in batch production. The design supports industrial machining routines where consistency and predictable tool wear are priorities. Fast, reproducible insert changes for efficient shopfloor flow A straightforward clamping and fastening arrangement, secured with a Torx T15 key and M4x10 screw, enables quick insert replacement and consistent positional accuracy after each change. The presence of seven cutting edges gives a defined balance between usable edge count and accessibility for indexable inserts, reducing downtime for regrinds and replacements. Clear torque engagement and standard fasteners speed up maintenance and help standardise tool-change procedures across multiple lathes. Compact geometry that fits tight set-ups and 90° operations With an overall length of 52 mm the head suits compact toolholders and restricted overhangs, lowering bending moments and improving repeatability. The 90° cutting angle is ideal for facing and shoulder work where perpendicular engagement is needed, enabling square shoulders without complex tool paths. The moderate mass of the component contributes to stable cutting dynamics while remaining manageable for quick toolholder swaps. Compatibility and integration into existing tooling systems Engineered for use with AP--1604 indexable inserts and compatible with inserts from Korloy, the head is suitable for a wide range of workshop applications that rely on industry-standard insert geometries. The component, supplied under SKU T188-1TM, is built to integrate into conventional lathe tool posts and holder systems and is intended for users seeking a reliable, coolant-fed corner solution without bespoke adaptations. Contact Metav Werkzeuge for application advice on Teknik Makina's T188-1TM corner tool head or to request cutting data and availability via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: T188-1TM Product type: Corner tool head Manufacturer: Teknik Makina ECLASS: 21181015 Label: 100mm Eckmesserkopf AP-- 1604 L52mm mit Innenkühlung Specifications Diameter: 100 mm Overall length: 52 mm Weight: 1.057 kg Number of cutting edges: 7 Cutting angle: 90° Design and features Internal coolant: yes For indexable inserts: AP--1604 Compatible insert manufacturer: Korloy Fastening: Torx T15 Torx screw: M4x10 FAQ What insert type is required for this head? The head accepts AP--1604 indexable inserts; inserts from Korloy are listed as compatible with this machining head (SKU T188-1TM). Does the tool head provide coolant supply to the cutting edge? Yes, the component is equipped with internal coolant to feed the cutting zone and support heat control and chip evacuation. What is the overall length and how does that affect set-up? The overall length is 52 mm, which supports compact toolholder arrangements and reduces overhang, improving rigidity and repeatability. Which fasteners and key are used for insert clamping? Insert clamping is secured with a Torx T15 engagement and an M4x10 screw to ensure reproducible positioning and straightforward maintenance. Which cutting applications are best suited to the 90° angle? The 90° cutting angle is particularly suitable for facing and shoulder operations where perpendicular engagement and square corner transitions are required. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
100mm Corner Turning Head for APKT 1604 Indexable Inserts, 90° Cutting Angle, 8 Cutting Edges, 32mm Shank - Teknik Makina
Take advantage of the combination of precise 90° cutting geometry, secure 32 mm shank fixation, and straightforward maintenance for consistent corner turning and minimal tool-change downtime — order directly via Metav Werkzeuge or ask our consultants for application advice. Corner tool head for APKT 1604 indexable inserts (T189TM) — 90° cutting geometry, 32 mm shank The corner tool head is a 90° turning head designed for use in CNC lathe operations with APKT 1604 indexable inserts, offering rigid clamping and compatibility with common insert manufacturers for reliable corner machining. 90° cutting geometry for accurate corners 32 mm shank for secure toolholder fit Compatible with APKT 1604 indexable inserts M4x10 Torx clamping screw; T15 key Consistent corner machining that improves part quality The 90° cutting geometry delivers a predictable cutting direction that helps to reduce deflection and maintain consistent edge form across serial parts. The head’s rigid construction and defined cutting angle translate into repeatable results on turned profiles, particularly where precise shoulder and corner transitions are required. For operations that demand regular high-quality finishes, the defined geometry simplifies process control and reduces the need for corrective grinding. Secure clamping and straightforward maintenance reduce downtime A 32 mm shank and standard Torx clamping arrangement ensure a robust mechanical fit in standard toolholders, while the M4x10 Torx clamping screw and T15 key provide easy, safe insert changes. The simple screw-based clamping reduces setup time and the risk of incorrect torque, improving repeatability between tool changes. This combination of features supports efficient workshop routines and lowers the likelihood of unplanned stoppages. Broad insert compatibility to simplify tooling logistics Designed for APKT 1604 indexable inserts, the head accepts inserts from common suppliers, which reduces inventory complexity. Compatibility with Korloy inserts is stated, allowing selection from widely available grades and geometries for roughing, finishing or mixed duty cycles. Using standardised inserts supports a lean stocking strategy and shortens response time when specific grades are required for different materials. Practical design that supports reliable production workflows With a nominal diameter of 100 mm, eight cutting edges and an overall length engineered for compact integration, the tool head balances accessibility with effective cutting leverage. The construction prioritises repeatability and serviceability: when correctly mounted and fastened, the assembly offers stable engagement and consistent cutting performance across repeated cycles. Its weight and dimensions also suit a variety of turret and toolpost arrangements commonly used in production shops. Contact Metav Werkzeuge for tailored tooling advice and reliable supply from Emmerich — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: T189TM Manufacturer: Teknik Makina Product: Corner tool head for APKT 1604 indexable inserts Compatible inserts manufacturer: Korloy Clamping screw: M4x10 Torx Torx key size: T15 Facts Diameter: 100 mm Shank diameter (D): 32 mm Overall length: 52 mm Weight: 1.53 kg Cutting angle: 90° Cutting edges: 8 Special features Designed for APKT 1604 indexable inserts 90° corner cutting geometry Robust shank for secure fixation Standard Torx clamping for quick insert changes FAQ What materials is the corner tool head suitable for? The corner tool head (T189TM) is specified as a holder for APKT 1604 indexable inserts; insert grade selection determines suitability for specific materials such as steel, cast iron or aluminium. Which insert type fits this tool head? APKT 1604 indexable inserts are supported; the head is compatible with commonly available APKT 1604 inserts from suppliers such as Korloy for varied machining tasks. What is the required tightening tool for insert changes? Insert clamping is performed with an M4x10 Torx screw using a T15 key, as specified for the Teknik Makina corner tool head (T189TM). Can the head be fitted in standard toolholders? Yes, the 32 mm shank diameter allows integration into toolholders designed for that shank size, providing secure mechanical engagement. Is the cutting angle adjustable? The head provides a fixed 90° cutting angle; angle modification would require a different tool head configuration or a different insert geometry. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
Planflächen schneller und präziser herstellen
Planfräser, auch als Planfräswerkzeug oder Stirnplanfräser bezeichnet, sind meist mit Wendeschneidplatten bestückte Trägerwerkzeuge für Fräsmaschinen. Sie ermöglichen das großflächige Abtragen von Material, das Planfräsen von Werkstücken auf Maß und die Erzeugung einer gleichmäßigen, planaren Oberflächenstruktur.
Wie das Planfräswerkzeug technisch wirkt und wann es unabdingbar ist
Ein Planfräswerkzeug arbeitet offen auf der Materialoberfläche, sodass Späne radial abgeführt werden. Bei Ausführungen ohne Innenkühlung erfolgt die Wärme- und Spanableitung über externe Kühlmitteldüsen oder zugeführte Druckluft; das ist bei vielen regulären Planfräsarbeiten ausreichend. Modelle mit Innenkühlung verfügen über integrierte Bohrungen und Kanäle, die Kühlschmierstoff oder Blasluft direkt an die Schneidkanten leiten. Diese gezielte Zufuhr verhindert thermische Überlastung, reduziert Aufbauschneidenbildung und spült Späne zuverlässig aus der Schnittzone – entscheidend bei schwerzerspanenden, klebenden Werkstoffen oder sehr großen Schnittbreiten.
Mehr Effizienz im Werkstattalltag durch gezielten Einsatz
- Reduziert Rüstzeiten durch modulare Bestückung mit Wendeschneidplatten und einfachem Plattenwechsel.
- Verbessert die Oberflächengüte durch gleichmäßige Spanabfuhr und, bei Bedarf, gezielte Innenkühlung.
- Erhöht die Standzeit der Werkzeuge, weil thermische Belastung und Aufbauschneidenbildung minimiert werden.
- Sorgt für konstante Maßhaltigkeit bei großflächigen Bearbeitungen dank stabiler Trägerwerkzeuge.
Metav als zuverlässiger Partner für Ihre Planbearbeitung
Metav steht für Demokratisierung der Präzision und kombiniert jahrzehntelange Fachkompetenz mit einem breiten Sortiment. Aus dem Lager in Emmerich liefert Metav als Qualitätsfilter ein Sortiment, das Werkstätten und Industrie mit technisch passenden Planfräsern versorgt. Mit über 48.000 zufriedenen Kunden und mehr als 250.000 Produkten bietet Metav die Auswahl und Verfügbarkeit, um die passende Ausführung — mit oder ohne Innenkühlung — für Ihre Bearbeitungssituation zu finden.
Kurz und prägnant
Ein Planfräser ist das zentrale Werkzeug, wenn große, ebene Flächen schnell, maßhaltig und mit hoher Oberflächenqualität herzustellen sind. Die Wahl zwischen ohne Innenkühlung und mit Innenkühlung richtet sich nach Werkstoff, Schnittbreite und Wärmeentwicklung.
FAQ
Wann ist ein Planfräser mit Innenkühlung erforderlich?
Bei schwerzerspanenden oder stark wärmeentwickelnden Werkstoffen sowie bei sehr großen Schnittbreiten empfiehlt sich ein Planfräser mit Innenkühlung, weil die gezielte Kühlschmierstoffzufuhr thermische Überlastung und Aufbauschneidenbildung verhindert.
Reicht bei normalen Stahlblechen ein Planfräswerkzeug ohne Innenkühlung aus?
Für viele reguläre Planfräsarbeiten an unlegierten und niedrig legierten Stählen ist ein Planfräswerkzeug ohne Innenkühlung ausreichend, da Späne offen radial abfließen und externe Kühlmitteldüsen oder Druckluft die Wärmeableitung übernehmen.
Wie verlängert man die Standzeit von Planfräsern effektiv?
Die Standzeit eines Planfräswerkzeugs lässt sich durch passende Wendeschneidplatten, richtige Schnittparameter, konsequente Spanabfuhr und bei Bedarf durch Innenkühlung deutlich erhöhen.
Welche Vorteile bieten modulare Planfräswerkzeuge im Produktionsalltag?
Modulare Planfräser ermöglichen schnellen Plattenwechsel, reduzieren Rüstzeiten und erlauben die Anpassung an unterschiedliche Schnittbreiten und Werkstoffe ohne kompletten Werkzeugwechsel.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com