150mm Precision Clamping Holder PWLNR 2525 M08 For WNMG 0804 Wendeplates Innenkühlung Right-Hand Cutting 95° - Teknik Makina
€48.00
Product information "150mm Precision Clamping Holder PWLNR 2525 M08 For WNMG 0804 Wendeplates Innenkühlung Right-Hand Cutting 95° - Teknik Makina"
Take advantage of a robust right-hand clamp holder with ISO PWLNR 2525 compatibility and a precise 95° cutting angle to improve turning stability and repeatability on worn or new tool posts; benefit from a standardised 150 mm overall length that eases machine setup. Order the clamp holder directly via Metav Werkzeuge or ask our consultants if needed.
Clamp holder PWLN for WNMG indexable inserts — right-hand turning toolholder (PWLNR 2525)
The Clamp holder PWLN for WNMG indexable inserts is a right-hand turning toolholder designed for secure clamping of WNMG 0804 inserts in CNC and manual lathe operations, offering standard ISO fitting and a compact 150 mm overall length.
*Right-hand turning toolholder PWLN form
*Compatible with WNMG 0804 indexable inserts
*ISO designation PWLNR 2525 for standardised fitting
*150 mm overall length and 95° cutting angle
Precise clamping for stable turning performance
The clamp holder delivers consistent tool positioning through a dedicated clamping geometry that suits WNMG 0804 inserts and an M08 clamping screw interface. The specified clamping height and cutting height coordination ensures repeatable centreline position, reducing setup variation and enhancing process reliability. This solid interface is especially useful where insert repeatability is critical for batch consistency and tool-change routines.
Standardised form factor for faster machine integration
Built to the PWLN form and bearing the ISO PWLNR 2525 designation, the toolholder fits common turret and toolpost arrangements with minimal adaptation. The 150 mm overall length and compact head dimensions (head width 32 mm, holder width 25 mm) support close radius work and reduce interference on multi-holder setups. Standardisation simplifies inventory and replacement strategies across production lines.
Balanced mass and geometry to reduce vibration
With a mass of 0.773 kg, the holder provides sufficient inertia to assist in damping vibration in interrupted cut scenarios without adding excessive load to the turret. The 95° cutting angle gives a favourable clearance and approach for general turning tasks, improving chip flow and surface finish. Such mechanical consistency contributes directly to longer insert life and fewer rework cycles.
Practical applications and workshop advantages
Engineered for everyday turning and profiling tasks, the holder suits workshops that require straightforward interchangeability with WNMG inserts and consistent performance. The right-hand orientation and the product’s compact footprint make it appropriate for both finish and light roughing operations on medium-duty lathes. For production environments seeking reduced tool-change complexity, the standard form and ISO conformity support streamlined work processes and predictable tool behaviour.
Contact Metav Werkzeuge for tailored advice on integrating this Teknik Cutting Tools clamp holder into existing tool setups and for ordering information; Metav Werkzeuge can provide fast guidance from Emmerich and support supply to the workshop.
Technical Data
- Article number: P151TM
- Manufacturer: Teknik Makina
- Designation (EN): PWLN for WNMG Indexable Inserts
- ISO designation: PWLNR 2525
Facts
- Overall length: 150 mm
- Cutting height: 38 mm
- Holder height: 25 mm
- Cutting head width: 32 mm
- Holder width: 25 mm
- Weight: 0.773 kg
- Cutting angle: 95°
- Compatible insert type: WNMG 0804
- Cutting direction: right
Special features
- M08 clamping screw interface
- Right-hand toolholder configuration
- Standardised PWLN form for modular setups
- Compact head suitable for close-radius operations
FAQ
What inserts fit this clamp holder?
The clamp holder accepts WNMG 0804 indexable inserts; the holder’s geometry and clamping interface are matched to this insert size for secure seating and repeatable positioning.
Is this toolholder right- or left-hand?
This turning holder is configured for right-hand cutting, as specified in the technical data for P151TM.
What is the ISO designation of the holder?
The toolholder carries the ISO designation PWLNR 2525, enabling straightforward replacement within standardised tool systems.
How does the 95° cutting angle affect machining?
A 95° cutting angle provides a favourable approach and clearance for general turning, improving chip evacuation and contributing to a consistent surface finish.
Can Metav Werkzeuge supply installation guidance?
Metav Werkzeuge can advise on mounting and integration; contact details are provided below and assistance is available from the Emmerich location.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 95.0 |
|---|---|
| Designation: | Klemmhalter |
| Diameter-1: | mm |
Passende Wendeplatten TUNGALOY
Take advantage of the CVD-coated T9215 grade for extended tool life and high feed rates to maintain a stable machining process; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 080404 T9215 indexable insert (trigon, 80°) — Tungaloy WNMG 080404 T9215 is an indexable trigon insert engineered for medium turning of ISO P15 Stahl, combining a modern CVD surface for high wear resistance with geometry optimised for stable, productive cutting CVD T9215 for high wear resistance Extended tool life at high speeds Trigon insert with 80° cutting geometry Double-sided chipbreaker, cylindrical hole Boosted productivity through advanced CVD technology The new CVD substrate T9215 delivers significantly improved resistance to wear and breakage in medium turning of ISO P15 Stahl, enabling higher cutting speeds and feeds without compromising edge life. Because the coating suppresses crack initiation and limits crack propagation, the cutting edge can remain in service for longer, reducing changeover frequency and increasing uptime. This leads to measurable gains in throughput for batch and continuous production environments while maintaining consistent component quality. Consistent chip control and repeatable surface finish The trigon geometry with an 80° cutting angle and a 0° rake leads to robust cutting mechanics and steady engagement with the workpiece. The integrated double-sided chipbreaker supports reliable chip formation across typical turning parameters for medium machining, while the 0.4 mm nose radius balances edge strength and fine surface finish. The cylindrical hole allows secure clamping, and the 4.76 mm thickness contributes to vibration dampening; together these features support repeatable dimensional accuracy and improved process stability. Practical advantages for workshop productivity and process security Application-focused design choices translate into practical benefits on the shop floor: fewer stoppages for insert changes, stable cutting at higher feeds, and predictable tool behaviour when machining Stahl in the specified ISO class. The insert’s composition and surface technology reduce the risk of premature edge failure, supporting longer tool cycles and simplified tool inventory management. As a result, the solution is well suited to manufacturers pursuing efficient, reliable turning operations without complex process requalification. For tailored recommendations on implementing Tungaloy T9215 grade inserts in existing turning processes, contact Metav Werkzeuge to discuss the SKU M702011230009 and application parameters Technical data Article number: M702011230009 Designation: WNMG080404 Type: WNMG Grade: T9215 Manufacturer: Tungaloy Facts Radius: 0.4 mm Insert size: 08 Thickness: 4.76 mm Cutting angle: 80° Rake angle: 0° Special features Carbide substrate CVD coating T9215 Double-sided chipbreaker Cylindrical hole Trigon shape Negative rake angle 0° For medium turning of ISO P15 (Stahl) FAQ What materials is this insert designed for? The Tungaloy WNMG 080404 T9215 insert is developed primarily for medium turning of ISO P15 class Stahl, offering optimised wear resistance for these materials. How does the T9215 CVD grade improve tool life? The CVD T9215 surface treatment suppresses crack initiation and slows crack growth, which increases the usable life of the cutting edge under higher speeds and feeds. Can the insert be used on both roughing and finishing operations? The combination of an 80° geometry and a 0.4 mm nose radius makes the insert suitable for stable medium turning where a balance between material removal and surface finish is required. Is the insert reversible or indexable? This is a double-sided indexable insert; both faces can be used to extend service life before replacement is necessary. Which SKU corresponds to this insert for ordering? Order reference: M702011230009 for the WNMG 080404 T9215 indexable insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.