170mm Klemmhalter 95° PWLNL 3232 P08 For WNMG 0804 Indexable Inserts Innenkühlung Linksschneidend - Teknik Makina
€56.00
Product information "170mm Klemmhalter 95° PWLNL 3232 P08 For WNMG 0804 Indexable Inserts Innenkühlung Linksschneidend - Teknik Makina"
Take advantage of precise, repeatable clamping for left-hand turning with WNMG 0804 inserts and a rigid 95° cutting angle; the robust 170 mm tool body and 32 mm clamp height ensure stable machining and consistent surface quality. Order the holder directly via Metav Werkzeuge or consult our specialists for additional guidance.
Klemmhalter PWLN for WNMG Indexable Inserts — Left-hand, 95° Cutting Angle (Teknik Makina)
A Klemmhalter engineered to hold WNMG 0804 indexable inserts securely for left-hand turning applications, designed for stable cuts and consistent repeatability in workshop and production environments
- Left-hand cutting direction compatibility
- For WNMG 0804 indexable inserts
- 95° cutting angle for versatile turning
- Robust 170 mm body with 32 mm clamp height
Secure clamping for dependable left-hand turning
The clamping system is configured to accept WNMG 0804 indexable inserts and to apply a firm hold via the ISO designation PWLNL 3232, ensuring reliable seating of the insert during machining. The left-hand orientation and the 95° cutting angle provide a defined cutting geometry that supports predictable chip flow and tool engagement. For users with limited technical background: a consistent cutting angle and secure clamping reduce chatter and uneven wear, so component tolerances are easier to maintain and rework is less frequent.
Stable geometry that improves surface quality and tool life
With an overall length of 170 mm, a cutting-head width of 40 mm and a body width of 32 mm, the toolholder delivers mass and geometry that contribute to vibration damping and cutting stability. The clamp height of 32 mm combined with a 38 mm cutting height produces a rigid setup that helps preserve insert life and maintain surface finish. The listed weight (1.421 kg) reflects a substantial construction that assists in reducing deflection under load; this translates into fewer interruptions for adjustments and higher first-pass yield in production.
Designed for integration into workshop and production workflows
The holder is specified with a shank designation P08 for secure mounting and is optimised for left-hand turning cycles commonly found in serial manufacturing and machine-shop use. Specifying this toolholder supports predictable process planning: repeatable changeover characteristics and a familiar ISO designation simplify tool lists and spare-part management. Maintenance cycles can be scheduled around verified tool stability rather than frequent troubleshooting, supporting efficient machining operations and controlled throughput.
For support selecting the correct holder for left-hand turning with WNMG inserts, contact Metav Werkzeuge — Technik Makina’s PWLN clamping holder (SKU P157TM) can be ordered or discussed with our consultants via info@metav-werkzeuge.com or by phone on +49 2822 7131930
Technical data
- SKU: P157TM
- Manufacturer: Teknik Makina
- Article name: PWLN for WNMG Indexable Inserts
- ISO designation: PWLNL 3232
Facts
- Clamp height: 32 mm
- Cutting head width: 40 mm
- Body width: 32 mm
- Cutting height: 38 mm
- Cutting angle: 95°
- Overall length: 170 mm
- Weight: 1.421 kg
Special features
- For WNMG 0804 indexable inserts
- Left-hand cutting direction
- Shank designation: P08
FAQ
What insert type does this holder accept?
The holder is specified for WNMG 0804 indexable inserts and is built to the ISO designation PWLNL 3232 for proper seating and clamping.
Is the clamping holder suitable for left-hand turning only?
Yes, the toolholder is designed for left-hand cutting direction and provides the correct geometry for corresponding turning operations.
What are the key dimensions to check for machine compatibility?
Relevant dimensions include an overall length of 170 mm, clamp height 32 mm, cutting-head width 40 mm and cutting height 38 mm; these determine fit and clearance in the turret or toolpost.
Which shank designation is used for mounting?
The holder uses the P08 shank designation for mounting and interface alignment.
How does the 95° cutting angle affect application choice?
The 95° cutting angle provides a sturdy cutting geometry that is well suited to general turning operations where a robust profile and predictable chip evacuation are priorities.
Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 95.0 |
|---|---|
| Designation: | Klemmhalter |
| Diameter-1: | mm |
Passende Wendeplatten TUNGALOY
Take advantage of the CVD-coated T9215 grade for extended tool life and high feed rates to maintain a stable machining process; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 080404 T9215 indexable insert (trigon, 80°) — Tungaloy WNMG 080404 T9215 is an indexable trigon insert engineered for medium turning of ISO P15 Stahl, combining a modern CVD surface for high wear resistance with geometry optimised for stable, productive cutting CVD T9215 for high wear resistance Extended tool life at high speeds Trigon insert with 80° cutting geometry Double-sided chipbreaker, cylindrical hole Boosted productivity through advanced CVD technology The new CVD substrate T9215 delivers significantly improved resistance to wear and breakage in medium turning of ISO P15 Stahl, enabling higher cutting speeds and feeds without compromising edge life. Because the coating suppresses crack initiation and limits crack propagation, the cutting edge can remain in service for longer, reducing changeover frequency and increasing uptime. This leads to measurable gains in throughput for batch and continuous production environments while maintaining consistent component quality. Consistent chip control and repeatable surface finish The trigon geometry with an 80° cutting angle and a 0° rake leads to robust cutting mechanics and steady engagement with the workpiece. The integrated double-sided chipbreaker supports reliable chip formation across typical turning parameters for medium machining, while the 0.4 mm nose radius balances edge strength and fine surface finish. The cylindrical hole allows secure clamping, and the 4.76 mm thickness contributes to vibration dampening; together these features support repeatable dimensional accuracy and improved process stability. Practical advantages for workshop productivity and process security Application-focused design choices translate into practical benefits on the shop floor: fewer stoppages for insert changes, stable cutting at higher feeds, and predictable tool behaviour when machining Stahl in the specified ISO class. The insert’s composition and surface technology reduce the risk of premature edge failure, supporting longer tool cycles and simplified tool inventory management. As a result, the solution is well suited to manufacturers pursuing efficient, reliable turning operations without complex process requalification. For tailored recommendations on implementing Tungaloy T9215 grade inserts in existing turning processes, contact Metav Werkzeuge to discuss the SKU M702011230009 and application parameters Technical data Article number: M702011230009 Designation: WNMG080404 Type: WNMG Grade: T9215 Manufacturer: Tungaloy Facts Radius: 0.4 mm Insert size: 08 Thickness: 4.76 mm Cutting angle: 80° Rake angle: 0° Special features Carbide substrate CVD coating T9215 Double-sided chipbreaker Cylindrical hole Trigon shape Negative rake angle 0° For medium turning of ISO P15 (Stahl) FAQ What materials is this insert designed for? The Tungaloy WNMG 080404 T9215 insert is developed primarily for medium turning of ISO P15 class Stahl, offering optimised wear resistance for these materials. How does the T9215 CVD grade improve tool life? The CVD T9215 surface treatment suppresses crack initiation and slows crack growth, which increases the usable life of the cutting edge under higher speeds and feeds. Can the insert be used on both roughing and finishing operations? The combination of an 80° geometry and a 0.4 mm nose radius makes the insert suitable for stable medium turning where a balance between material removal and surface finish is required. Is the insert reversible or indexable? This is a double-sided indexable insert; both faces can be used to extend service life before replacement is necessary. Which SKU corresponds to this insert for ordering? Order reference: M702011230009 for the WNMG 080404 T9215 indexable insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.