32mm Drilling Bar PWLN for WNMG 0804, 25mm Shank 50mm Insert Height, Right-Hand - Teknik Makina
€58.00
Product information "32mm Drilling Bar PWLN for WNMG 0804, 25mm Shank 50mm Insert Height, Right-Hand - Teknik Makina"
Take advantage of the combination of rigid shank design and precise indexable-insert compatibility for consistent turning results; the 25 mm shank and 32 mm head diameter provide stability while the tool accepts WNMG 0804 inserts for versatile finishing. Order the Teknik Makina boring bar directly via Metav Werkzeuge or consult their advisors for application-specific recommendations.
PWLN for WNMG Indexable Inserts boring bar by Teknik Makina — right-hand, 32 mm head
A robust PWLN for WNMG Indexable Inserts boring bar intended for right-hand turning operations, compatible with WNMG 0804 inserts and designed for stable, repeatable metalcutting in workshop and production environments.
- 25 mm shank diameter for high rigidity
- Compatible with WNMG 0804 indexable inserts
- 95° cutting angle for profile accuracy
Stable performance for indexable-insert turning
The design focuses on delivering consistent cut quality when used with indexable turning inserts. The tool accepts WNMG 0804 inserts, which are a common format for finishing and general turning, enabling predictable geometry and repeatable results. The specified 95° cutting angle supports profile work and controlled tool engagement, reducing the need for extensive rework. This compatibility simplifies tooling logistics and helps maintain a steady production flow with established insert grades.
Rigidity and toolholding that reduce vibration
A 25 mm shank diameter paired with a 32 mm head diameter gives the bar improved stiffness compared with smaller-shank alternatives. Greater rigidity translates to less chatter, better surface finish and longer insert life under comparable cutting conditions. The tool’s mass of 0.911 kg contributes to stable cutting dynamics without excessive overhang, which is beneficial during medium- to light-duty turning cycles on conventional and CNC lathes where repeatable dimensional accuracy matters.
Practical integration and predictable handling
With an overall length of 250 mm and the ISO designation S25S PWLNR, the boring bar is straightforward to identify and mount in common toolposts and turret systems. The right-hand cutting direction conforms to typical lathe setups and cutting strategies, so adaptations are minimal. The combination of standard ISO labelling and WNMG insert compatibility supports quick insert changes and predictable tool indexing, reducing downtime and keeping throughput steady in both jobbing and batch production.
Contact Metav Werkzeuge for application-specific advice on Teknik Makina boring bars and ensure the right clamping and insert choice for reliable workshop performance
Technical data
- Article number: P360TM
- Manufacturer: Teknik Makina
- Name: PWLN for WNMG Indexable Inserts
- ISO designation: S25S PWLNR
- Weight: 0.911 kg
Facts
- Diameter: 32 mm
- Shank diameter: 25 mm
- Cutting edge height: 50 mm
- Overall length: 250 mm
- Cutting angle: 95°
Special features
- Right-hand cutting direction
- For WNMG 0804 indexable inserts
- PWLN geometry for insert turning
FAQ
What inserts fit this boring bar? The boring bar is specified for WNMG 0804 indexable inserts; Teknik Makina's PWLN geometry and the ISO designation S25S PWLNR ensure correct seating for that insert format (SKU P360TM).
Is the bar suitable for CNC turret use? Yes — the bar’s 25 mm shank and 250 mm overall length are compatible with standard turret and toolpost clamping; the design supports stable cutting when securely mounted.
What does the 95° cutting angle mean in practice? A 95° cutting angle provides a near-neutral approach suitable for profile turning and finishing; this geometry helps maintain dimensional stability when using WNMG 0804 inserts on the PWLN toolholder.
Can the bar be used for heavy roughing cuts? The PWLN boring bar is optimised for rigidity and finishing operations with indexable inserts; for heavy roughing, assessment of insert grade and machine power is recommended before use with the Teknik Makina PWLN boring bar (P360TM).
How does the shank diameter affect performance? The 25 mm shank diameter increases stiffness compared with smaller shanks, reducing deflection and vibration for improved surface finish and longer insert life on both manual and CNC lathes.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 95.0 |
|---|---|
| Designation: | Bohrstange |
| Diameter-1: | 32mm |
Passende Wendeplatten TUNGALOY
Take advantage of the CVD-coated T9215 grade for extended tool life and high feed rates to maintain a stable machining process; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 080404 T9215 indexable insert (trigon, 80°) — Tungaloy WNMG 080404 T9215 is an indexable trigon insert engineered for medium turning of ISO P15 Stahl, combining a modern CVD surface for high wear resistance with geometry optimised for stable, productive cutting CVD T9215 for high wear resistance Extended tool life at high speeds Trigon insert with 80° cutting geometry Double-sided chipbreaker, cylindrical hole Boosted productivity through advanced CVD technology The new CVD substrate T9215 delivers significantly improved resistance to wear and breakage in medium turning of ISO P15 Stahl, enabling higher cutting speeds and feeds without compromising edge life. Because the coating suppresses crack initiation and limits crack propagation, the cutting edge can remain in service for longer, reducing changeover frequency and increasing uptime. This leads to measurable gains in throughput for batch and continuous production environments while maintaining consistent component quality. Consistent chip control and repeatable surface finish The trigon geometry with an 80° cutting angle and a 0° rake leads to robust cutting mechanics and steady engagement with the workpiece. The integrated double-sided chipbreaker supports reliable chip formation across typical turning parameters for medium machining, while the 0.4 mm nose radius balances edge strength and fine surface finish. The cylindrical hole allows secure clamping, and the 4.76 mm thickness contributes to vibration dampening; together these features support repeatable dimensional accuracy and improved process stability. Practical advantages for workshop productivity and process security Application-focused design choices translate into practical benefits on the shop floor: fewer stoppages for insert changes, stable cutting at higher feeds, and predictable tool behaviour when machining Stahl in the specified ISO class. The insert’s composition and surface technology reduce the risk of premature edge failure, supporting longer tool cycles and simplified tool inventory management. As a result, the solution is well suited to manufacturers pursuing efficient, reliable turning operations without complex process requalification. For tailored recommendations on implementing Tungaloy T9215 grade inserts in existing turning processes, contact Metav Werkzeuge to discuss the SKU M702011230009 and application parameters Technical data Article number: M702011230009 Designation: WNMG080404 Type: WNMG Grade: T9215 Manufacturer: Tungaloy Facts Radius: 0.4 mm Insert size: 08 Thickness: 4.76 mm Cutting angle: 80° Rake angle: 0° Special features Carbide substrate CVD coating T9215 Double-sided chipbreaker Cylindrical hole Trigon shape Negative rake angle 0° For medium turning of ISO P15 (Stahl) FAQ What materials is this insert designed for? The Tungaloy WNMG 080404 T9215 insert is developed primarily for medium turning of ISO P15 class Stahl, offering optimised wear resistance for these materials. How does the T9215 CVD grade improve tool life? The CVD T9215 surface treatment suppresses crack initiation and slows crack growth, which increases the usable life of the cutting edge under higher speeds and feeds. Can the insert be used on both roughing and finishing operations? The combination of an 80° geometry and a 0.4 mm nose radius makes the insert suitable for stable medium turning where a balance between material removal and surface finish is required. Is the insert reversible or indexable? This is a double-sided indexable insert; both faces can be used to extend service life before replacement is necessary. Which SKU corresponds to this insert for ordering? Order reference: M702011230009 for the WNMG 080404 T9215 indexable insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.