50mm S40T PWLNR Boring Bar For WNMG 0804 Inserts, 95° Cutting Angle, 300mm Overall Length - Teknik Makina
€87.00
Product information "50mm S40T PWLNR Boring Bar For WNMG 0804 Inserts, 95° Cutting Angle, 300mm Overall Length - Teknik Makina"
High rigidity from the S40T shank and precise insert seating deliver stable machining with predictable chip control; the 95° cutting angle and right‑hand geometry support secure engagement in typical turning operations. Order the P364TM boring bar directly via Metav Werkzeuge or consult their specialists for integration and availability advice.
P364TM — Boring bar S40T PWLNR for WNMG 0804 (Right‑hand, 95°)
The P364TM is a right‑hand boring bar with an S40T shank, designed for turning operations using WNMG 0804 indexable inserts and intended for stable, repeatable metal‑removal tasks
- Right‑hand cutting direction
- Fits WNMG 0804 indexable inserts
- 40 mm shank diameter, 300 mm overall length
- 95° cutting angle for secure engagement
Rigidity and predictable cutting performance for production use
The S40T shank and the S40T PWLNR ISO designation provide a compact, stiff holder that reduces deflection under load. With a 40 mm shank diameter and 300 mm overall length, the toolholder sustains radial forces while maintaining repeatable seating of the insert; this leads to consistent part geometry and extended insert life. Specified mass and dimensions (weight 2.45 kg, cutting height 60 mm) enable planners to account for tool‑holder dynamics when programming spindle speeds and feeds. The result is measurable process stability and fewer reworks in batch production.
Compatibility and machining benefits with WNMG 0804 inserts
Engineered for WNMG 0804 indexable inserts, the holder accepts an industry‑standard insert format that simplifies stocking and changeover. The 95° cutting angle and right‑hand orientation promote positive engagement and controlled chip flow on typical turning tasks; this geometry is particularly useful where a secure approach angle reduces vibration and improves surface finish. For shops standardising on negative‑geometry turning inserts, the toolholder integrates directly into existing workflows and CAM setups without adapting insert geometry.
Practical advantages for workshop integration and maintenance
The toolholder’s nominal 50 mm diameter at the working end and its standard ISO naming make procurement and tool management straightforward. The design minimises setup time because insert clamping and seat alignment follow established conventions for PWLN‑style holders. As a product from Teknik Cutting Tools utilised via Metav Werkzeuge’s distribution, the assembly benefits from warehouse availability in Emmerich and advised compatibility checks where specific machine interfaces or clearances are constrained. Routine inspection is limited to insert seating and clamp torque, keeping maintenance effort low while ensuring reliable production output.
For technical advice and availability of the Teknik Cutting Tools P364TM boring bar, contact Metav Werkzeuge in Emmerich: info@metav-werkzeuge.com or +49 2822 7131930
Technical Data
- Article number: P364TM
- SKU: P364TM
- ISO designation: S40T PWLNR
- Type: PWLN for WNMG indexable inserts
- Brand: Teknik Makina
Dimensions
- Shank diameter: 40 mm
- Overall length: 300 mm
- Diameter: 50 mm
- Cutting height: 60 mm
- Weight: 2.45 kg
Compatibility & Features
- Suitable for: WNMG 0804 inserts
- Cutting direction: Right‑hand
- Cutting angle: 95°
- ECLASS: 21180806
- Files: 62de7e450f56dbb4de4dbefd, 62de7edf33927e49dbf32787
FAQ
Which insert type fits this toolholder?
The P364TM accepts WNMG 0804 indexable inserts; the holder is specified for PWLN‑style clamping compatible with that insert size.
Is the cutting direction right‑hand or left‑hand?
This toolholder is built with a right‑hand cutting direction and the ISO code indicates a right‑hand configuration.
What are the key dimensions to check before fitting?
Confirm the 40 mm shank diameter, 300 mm overall length and the 50 mm working diameter against turret clearance and toolpost capacity.
What is the benefit of the 95° cutting angle?
A 95° cutting angle provides secure engagement and stable contact at the cutting edge, improving surface finish and reducing chatter in many turning applications.
Who manufactures and supplies the tool?
The tool is produced by Teknik Cutting Tools and supplied through Metav Werkzeuge; for ordering and technical integration details consult Metav Werkzeuge.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 95.0 |
|---|---|
| Designation: | Bohrstange |
| Diameter-1: | 50mm |
Passende Wendeplatten TUNGALOY
Take advantage of the CVD-coated T9215 grade for extended tool life and high feed rates to maintain a stable machining process; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 080404 T9215 indexable insert (trigon, 80°) — Tungaloy WNMG 080404 T9215 is an indexable trigon insert engineered for medium turning of ISO P15 Stahl, combining a modern CVD surface for high wear resistance with geometry optimised for stable, productive cutting CVD T9215 for high wear resistance Extended tool life at high speeds Trigon insert with 80° cutting geometry Double-sided chipbreaker, cylindrical hole Boosted productivity through advanced CVD technology The new CVD substrate T9215 delivers significantly improved resistance to wear and breakage in medium turning of ISO P15 Stahl, enabling higher cutting speeds and feeds without compromising edge life. Because the coating suppresses crack initiation and limits crack propagation, the cutting edge can remain in service for longer, reducing changeover frequency and increasing uptime. This leads to measurable gains in throughput for batch and continuous production environments while maintaining consistent component quality. Consistent chip control and repeatable surface finish The trigon geometry with an 80° cutting angle and a 0° rake leads to robust cutting mechanics and steady engagement with the workpiece. The integrated double-sided chipbreaker supports reliable chip formation across typical turning parameters for medium machining, while the 0.4 mm nose radius balances edge strength and fine surface finish. The cylindrical hole allows secure clamping, and the 4.76 mm thickness contributes to vibration dampening; together these features support repeatable dimensional accuracy and improved process stability. Practical advantages for workshop productivity and process security Application-focused design choices translate into practical benefits on the shop floor: fewer stoppages for insert changes, stable cutting at higher feeds, and predictable tool behaviour when machining Stahl in the specified ISO class. The insert’s composition and surface technology reduce the risk of premature edge failure, supporting longer tool cycles and simplified tool inventory management. As a result, the solution is well suited to manufacturers pursuing efficient, reliable turning operations without complex process requalification. For tailored recommendations on implementing Tungaloy T9215 grade inserts in existing turning processes, contact Metav Werkzeuge to discuss the SKU M702011230009 and application parameters Technical data Article number: M702011230009 Designation: WNMG080404 Type: WNMG Grade: T9215 Manufacturer: Tungaloy Facts Radius: 0.4 mm Insert size: 08 Thickness: 4.76 mm Cutting angle: 80° Rake angle: 0° Special features Carbide substrate CVD coating T9215 Double-sided chipbreaker Cylindrical hole Trigon shape Negative rake angle 0° For medium turning of ISO P15 (Stahl) FAQ What materials is this insert designed for? The Tungaloy WNMG 080404 T9215 insert is developed primarily for medium turning of ISO P15 class Stahl, offering optimised wear resistance for these materials. How does the T9215 CVD grade improve tool life? The CVD T9215 surface treatment suppresses crack initiation and slows crack growth, which increases the usable life of the cutting edge under higher speeds and feeds. Can the insert be used on both roughing and finishing operations? The combination of an 80° geometry and a 0.4 mm nose radius makes the insert suitable for stable medium turning where a balance between material removal and surface finish is required. Is the insert reversible or indexable? This is a double-sided indexable insert; both faces can be used to extend service life before replacement is necessary. Which SKU corresponds to this insert for ordering? Order reference: M702011230009 for the WNMG 080404 T9215 indexable insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.