40mm S32T PWLNL Boring Bar PWLN for WNMG 0804, 32mm Shank Diameter 60mm Cutting Height, Left-Hand - Teknik Makina
€70.00
Product information "40mm S32T PWLNL Boring Bar PWLN for WNMG 0804, 32mm Shank Diameter 60mm Cutting Height, Left-Hand - Teknik Makina"
Take advantage of the combination of robust build, precise compatibility with WNMG 0804 inserts and an optimised 95° cutting angle for consistent chip control; order directly via Metav Werkzeuge or consult the team for application-specific advice.
Boring bar PWLN for WNMG indexable inserts (S32T PWLNL) by Teknik Makina — 32 mm shank, left‑hand
The PWLN boring bar for WNMG indexable inserts delivers a left‑hand turning solution for internal and external machining where stable clamping and predictable chip flow matter most
- 32 mm shank diameter
- Compatible with WNMG 0804 inserts
- Left‑hand design for internal turning
- 95° cutting angle for reliable chip control
Precision that raises throughput and reduces rework
The bar is engineered to provide repeatable results under industrial conditions. Its 32 mm shank and ISO designation S32T PWLNL ensure stable mounting in standard tool holders, reducing vibration and the risk of tool chatter. The geometry, matched to WNMG 0804 indexable inserts, translates into consistent cutting engagement and predictable tool life; fewer interruptions for tool changes mean higher effective machine uptime and improved process economy.
Easy integration and mechanical reliability on the lathe
With a 300 mm overall length, 40 mm diameter and a cutting height of 60 mm, the bar fits typical turret and tool‑post set‑ups while keeping the centre‑of‑mass close to the holder. The left‑hand configuration and a 95° cutting angle support controlled chip evacuation and stable side cutting forces, which simplifies set‑up and reduces the need for frequent readjustment. The component’s mass (approx. 1.764 kg) contributes to damping without excessive inertia, helping to maintain surface finish and dimensional accuracy during extended cuts.
Practical application advantages for workshop and production use
Compatibility with WNMG 0804 inserts means fast indexable insert changes and broad grade options for different materials and cutting conditions. The holder’s design supports a wide range of turning tasks where left‑hand engagement is required, from finishing grooves to light roughing passes. As a standardised tool, it enables straightforward stock management and quick replacement in multi‑machine environments, supporting predictable scheduling and lower downtime.
Contact Metav Werkzeuge for tailored advice on integrating this tool into production and to secure supply from Emmerich — phone +49 2822 7131930 or info@metav-werkzeuge.com
Technical data
- Article number: P372TM
- Brand: Teknik Makina
- Designation: PWLN for WNMG indexable inserts
- ISO designation: S32T PWLNL
Dimensions / Core data
- Shank diameter: 32 mm
- Diameter: 40 mm
- Overall length: 300 mm
- Cutting height: 60 mm
- Cutting angle: 95°
- Weight: 1.764 kg
Special features
- Compatible inserts: WNMG 0804
- Cutting direction: left
- Clamping holder designation: 08
FAQ
What insert size is required for this holder?
The boring bar accepts WNMG 0804 indexable inserts; the holder geometry is matched to this insert size for correct seating and chip control.
Is the tool suitable for left‑hand turning only?
Yes — the bar is a left‑hand design and is intended for operations where left‑hand cutting is required.
What is the ISO designation of the tool?
The tool carries the ISO code S32T PWLNL, which defines the shank and holder style for standard tool posts.
Can grades and coatings of inserts be varied for different materials?
Different grades and coatings for WNMG 0804 inserts can be selected to suit specific materials and cutting speeds while using this holder.
Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 95.0 |
|---|---|
| Designation: | Bohrstange |
| Diameter-1: | 40mm |
Passende Wendeplatten TUNGALOY
Take advantage of the CVD-coated T9215 grade for extended tool life and high feed rates to maintain a stable machining process; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 080404 T9215 indexable insert (trigon, 80°) — Tungaloy WNMG 080404 T9215 is an indexable trigon insert engineered for medium turning of ISO P15 Stahl, combining a modern CVD surface for high wear resistance with geometry optimised for stable, productive cutting CVD T9215 for high wear resistance Extended tool life at high speeds Trigon insert with 80° cutting geometry Double-sided chipbreaker, cylindrical hole Boosted productivity through advanced CVD technology The new CVD substrate T9215 delivers significantly improved resistance to wear and breakage in medium turning of ISO P15 Stahl, enabling higher cutting speeds and feeds without compromising edge life. Because the coating suppresses crack initiation and limits crack propagation, the cutting edge can remain in service for longer, reducing changeover frequency and increasing uptime. This leads to measurable gains in throughput for batch and continuous production environments while maintaining consistent component quality. Consistent chip control and repeatable surface finish The trigon geometry with an 80° cutting angle and a 0° rake leads to robust cutting mechanics and steady engagement with the workpiece. The integrated double-sided chipbreaker supports reliable chip formation across typical turning parameters for medium machining, while the 0.4 mm nose radius balances edge strength and fine surface finish. The cylindrical hole allows secure clamping, and the 4.76 mm thickness contributes to vibration dampening; together these features support repeatable dimensional accuracy and improved process stability. Practical advantages for workshop productivity and process security Application-focused design choices translate into practical benefits on the shop floor: fewer stoppages for insert changes, stable cutting at higher feeds, and predictable tool behaviour when machining Stahl in the specified ISO class. The insert’s composition and surface technology reduce the risk of premature edge failure, supporting longer tool cycles and simplified tool inventory management. As a result, the solution is well suited to manufacturers pursuing efficient, reliable turning operations without complex process requalification. For tailored recommendations on implementing Tungaloy T9215 grade inserts in existing turning processes, contact Metav Werkzeuge to discuss the SKU M702011230009 and application parameters Technical data Article number: M702011230009 Designation: WNMG080404 Type: WNMG Grade: T9215 Manufacturer: Tungaloy Facts Radius: 0.4 mm Insert size: 08 Thickness: 4.76 mm Cutting angle: 80° Rake angle: 0° Special features Carbide substrate CVD coating T9215 Double-sided chipbreaker Cylindrical hole Trigon shape Negative rake angle 0° For medium turning of ISO P15 (Stahl) FAQ What materials is this insert designed for? The Tungaloy WNMG 080404 T9215 insert is developed primarily for medium turning of ISO P15 class Stahl, offering optimised wear resistance for these materials. How does the T9215 CVD grade improve tool life? The CVD T9215 surface treatment suppresses crack initiation and slows crack growth, which increases the usable life of the cutting edge under higher speeds and feeds. Can the insert be used on both roughing and finishing operations? The combination of an 80° geometry and a 0.4 mm nose radius makes the insert suitable for stable medium turning where a balance between material removal and surface finish is required. Is the insert reversible or indexable? This is a double-sided indexable insert; both faces can be used to extend service life before replacement is necessary. Which SKU corresponds to this insert for ordering? Order reference: M702011230009 for the WNMG 080404 T9215 indexable insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.