50mm PWLN Boring Bar For WNMG 0804 Indexable Inserts 40mm Shank, 60mm Cutting Height, 300mm Overall Length - Teknik Makina
€87.00
Product information "50mm PWLN Boring Bar For WNMG 0804 Indexable Inserts 40mm Shank, 60mm Cutting Height, 300mm Overall Length - Teknik Makina"
Take advantage of a rigid 40 mm shank combined with compatibility for WNMG 0804 indexable inserts to maintain repeatable turning performance; the left‑hand 95° geometry and 300 mm overall length ensure stable chip control and tool life — order via Metav Werkzeuge or consult the specialists for integration advice.
PWLN for WNMG Indexable Inserts – 40 mm shank left‑hand boring bar by Teknik Makina
A PWLN for WNMG Indexable Inserts designed as a left‑hand boring bar for turning operations, compatible with WNMG 0804 inserts and optimised for stable clamping and consistent surface finish
- 40 mm shank diameter for stable clamping
- Compatible with WNMG 0804 inserts
- Left‑hand cutting, 95° cutting angle
- 300 mm overall length, robust 2.45 kg
Stable clamping for repeatable turning accuracy
The robust 40 mm shank and ISO designation S40T PWLNL provide high torsional stiffness and a secure toolholder fit, which reduces vibration during interrupted cuts. That stiffness translates into more consistent diameters and surface quality, making the bar suitable for serial production where repeatability matters. The combination of shank diameter and overall length gives a predictable deflection behaviour; the result is fewer reworks and improved productivity on batch turning tasks.
Proven insert compatibility and machining orientation
Designed to accept WNMG 0804 indexable inserts, the toolholder is set up for conventional left‑hand cutting and a 95° cutting angle, enabling reliable chip formation and predictable cutting forces. Compatibility with a common negative‑rake insert format simplifies tooling logistics and reduces inventory complexity. For workshops standardising on WNMG inserts, this holder fits directly into existing indexable‑insert toolsets and supports quick insert changes without additional adaptations.
Rigidity, geometry and occupational benefits
With a 300 mm overall length and a diameter of 50 mm at the head, the bar balances reach with rigidity for internal and external operations. The specified cutting height 60 mm ensures correct insert seating and clamping stability, which helps maintain cutting-edge geometry under load. The tool’s mass of 2.45 kg contributes to damping of high‑frequency vibrations, improving finish on sensitive components and extending insert life through steadier cutting conditions.
For procurement or application guidance on the Teknik Makina PWLN boring bar, contact Metav Werkzeuge for tailored advice and fast supply from Emmerich — eMail: info@metav-werkzeuge.com or call +49 2822 7131930
Technical data
-
Article number: P374TM
-
Manufacturer: Teknik Makina
-
ISO designation: S40T PWLNL
-
Designation: PWLN for WNMG Indexable Inserts
-
Cutting direction: left
Facts
- Shank diameter: 40 mm
- Overall length: 300 mm
- Head diameter: 50 mm
- Cutting angle: 95°
- Cutting height: 60 mm
- Weight: 2.45 kg
Special features
- Compatible inserts: WNMG 0804
- Clamping holder size: 08
- Files available: 62de7e4533927e49dbf3273d, 62de7edf0f56dbb4de4dbf50
FAQ
What inserts fit this boring bar?
The PWLN for WNMG Indexable Inserts accepts WNMG 0804 indexable inserts; the holder is prepared to seat the insert securely for left‑hand turning operations.
Is this tool suitable for internal boring and external turning?
The bar’s geometry and 300 mm overall length allow both internal and external applications where the required reach and rigidity match the workpiece set‑up.
What is the shank diameter and why does it matter?
Shank diameter is 40 mm; a larger shank increases rigidity, reduces deflection and improves surface finish and dimensional stability during machining.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 95.0 |
|---|---|
| Designation: | Bohrstange |
| Diameter-1: | 50mm |
Passende Wendeplatten TUNGALOY
Take advantage of the CVD-coated T9215 grade for extended tool life and high feed rates to maintain a stable machining process; order the insert directly via Metav Werkzeuge or consult our specialists for application advice. WNMG 080404 T9215 indexable insert (trigon, 80°) — Tungaloy WNMG 080404 T9215 is an indexable trigon insert engineered for medium turning of ISO P15 Stahl, combining a modern CVD surface for high wear resistance with geometry optimised for stable, productive cutting CVD T9215 for high wear resistance Extended tool life at high speeds Trigon insert with 80° cutting geometry Double-sided chipbreaker, cylindrical hole Boosted productivity through advanced CVD technology The new CVD substrate T9215 delivers significantly improved resistance to wear and breakage in medium turning of ISO P15 Stahl, enabling higher cutting speeds and feeds without compromising edge life. Because the coating suppresses crack initiation and limits crack propagation, the cutting edge can remain in service for longer, reducing changeover frequency and increasing uptime. This leads to measurable gains in throughput for batch and continuous production environments while maintaining consistent component quality. Consistent chip control and repeatable surface finish The trigon geometry with an 80° cutting angle and a 0° rake leads to robust cutting mechanics and steady engagement with the workpiece. The integrated double-sided chipbreaker supports reliable chip formation across typical turning parameters for medium machining, while the 0.4 mm nose radius balances edge strength and fine surface finish. The cylindrical hole allows secure clamping, and the 4.76 mm thickness contributes to vibration dampening; together these features support repeatable dimensional accuracy and improved process stability. Practical advantages for workshop productivity and process security Application-focused design choices translate into practical benefits on the shop floor: fewer stoppages for insert changes, stable cutting at higher feeds, and predictable tool behaviour when machining Stahl in the specified ISO class. The insert’s composition and surface technology reduce the risk of premature edge failure, supporting longer tool cycles and simplified tool inventory management. As a result, the solution is well suited to manufacturers pursuing efficient, reliable turning operations without complex process requalification. For tailored recommendations on implementing Tungaloy T9215 grade inserts in existing turning processes, contact Metav Werkzeuge to discuss the SKU M702011230009 and application parameters Technical data Article number: M702011230009 Designation: WNMG080404 Type: WNMG Grade: T9215 Manufacturer: Tungaloy Facts Radius: 0.4 mm Insert size: 08 Thickness: 4.76 mm Cutting angle: 80° Rake angle: 0° Special features Carbide substrate CVD coating T9215 Double-sided chipbreaker Cylindrical hole Trigon shape Negative rake angle 0° For medium turning of ISO P15 (Stahl) FAQ What materials is this insert designed for? The Tungaloy WNMG 080404 T9215 insert is developed primarily for medium turning of ISO P15 class Stahl, offering optimised wear resistance for these materials. How does the T9215 CVD grade improve tool life? The CVD T9215 surface treatment suppresses crack initiation and slows crack growth, which increases the usable life of the cutting edge under higher speeds and feeds. Can the insert be used on both roughing and finishing operations? The combination of an 80° geometry and a 0.4 mm nose radius makes the insert suitable for stable medium turning where a balance between material removal and surface finish is required. Is the insert reversible or indexable? This is a double-sided indexable insert; both faces can be used to extend service life before replacement is necessary. Which SKU corresponds to this insert for ordering? Order reference: M702011230009 for the WNMG 080404 T9215 indexable insert by Tungaloy. Manufacturer/Responsible: Tungaloy-NTK Germany GmbH, Katzbergstraße 3a, 40764 Langenfeld - Protected trademarks and product names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. There is no affiliation between our company and the mentioned brands. The item offered is an original, brand-new product from the manufacturer.