2500 g Precision Caliper Scale Removable Indicator, 0.01 g Readability, Stainless Steel Pan, DMS Strain Gauge, LCD - KERN

Take advantage of the integrated power supply, prolonged operating time and the switchable AUTO‑OFF feature for dependable mobile weighing and uninterrupted workflow; order the accessory directly via Metav Werkzeuge or consult the specialists for compatibility and delivery details. PCD-A04 internal battery pack for PCD.250-3 – up to 24 h runtime, AUTO‑OFF (KERN) The PCD-A04 is an internal battery solution for the PCD.250-3 scale, engineered to provide extended portable operation and to protect battery life with a switchable AUTO‑OFF function. Internal battery operation for scales Up to 24 h runtime without backlight Switchable AUTO‑OFF for battery protection Compatible with PCD.250‑3 scales Dependable mobile power for continuous measurement The integrated internal battery supplies the scale with stable energy, reducing dependence on mains power and allowing scales to remain fully operational during transport or remote use. With a runtime of up to 24 hours without backlight, the pack supports long measurement sessions and reduces interruptions in production checks and quality control routines. This improves process reliability and helps maintain throughput in workshops and inspection stations. Battery protection that saves service time The unit features a switchable AUTO‑OFF function designed to conserve battery life by automatically powering down after inactivity; this setting can be disabled where continuous measurement is required. The compact design and low weight (0.18 kg) keep additional load minimal, making the module suitable for regular handling and installation without affecting scale ergonomics. The result is less downtime for charging cycles and fewer unexpected stops during critical weighing tasks. Clear fit for workshop and quality environments Designed as an accessory for precision scales, the module is intended for professional contexts that demand consistent, mobile weighing capabilities. Compatibility with the PCD.250‑3 range ensures a straightforward integration into existing setups. Backed by KERN manufacturing and distributed via Metav Werkzeuge, the accessory supports a transparent supply chain and dependable stock availability for industrial and trade customers. Contact Metav Werkzeuge for procurement and technical advice on KERN internal battery packs such as the PCD-A04 — email info@metav-werkzeuge.com or call +49 2822 7131930 to secure a reliable supply from Emmerich am Rhein Technical data Article number: PCD-A04 Manufacturer: KERN GTIN: 4045761134188 Country of origin: CN Tariff number: 85075000 Core specifications Battery runtime: up to 24 h (without backlight) Weight: 0.18 kg eClass: 21059207 Features Accessory for scales, intended for internal battery use Product group: batteries / accumulators Switchable AUTO‑OFF function for battery preservation Designed for use with the PCD.250‑3 scale series FAQ Is the battery pack compatible with other scale models? Compatibility is specified for the PCD.250‑3 series; the PCD-A04 is designed as the internal power option for these models and should be verified against other models before use. How long will the battery keep the scale operating? When used without the display backlight, the internal battery provides operation for up to 24 hours under typical conditions. Can the AUTO‑OFF function be turned off? Yes, the AUTO‑OFF feature is switchable so that automatic shutdown can be disabled where continuous operation is required. Is the battery pack supplied ready to install? The module is supplied as an internal accessory for the PCD.250‑3; installation should follow the scale manufacturer’s instructions to ensure correct fitting and safety. Who manufactures the battery pack and where is it produced? The module is manufactured by KERN with origin indicated as China and distributed through Metav Werkzeuge for the European market. Manufacturer: KERN; Supplier: Metav Werkzeuge, Emmerich am Rhein; Contact: info@metav-werkzeuge.com | +49 2822 7131930

Benefit from reliable dust protection and straightforward compatibility with the PCD.250-3 indicator; the lightweight design preserves handling and the practical set format simplifies stock keeping. Order the Protective cover for PCD.250-3 directly via Metav Werkzeuge or ask our consultants if needed. Protective cover for PCD.250-3 — KERN accessory for weighing indicators The Protective cover for PCD.250-3 provides dust and contaminant protection for weighing electronics, suited to workshop and industrial scales where reliable indicator performance is required. Protective cover for PCD.250-3 indicators KERN accessory for weighing equipment Delivered as a practical set Protect sensitive electronics and maintain consistent measurements The cover offers targeted dust protection for the indicator unit, helping to prevent particulate ingress that can affect display clarity and internal controls. In practice, fewer contamination-related interruptions mean less cleaning and reduced recalibration frequency, which supports a steady production rhythm. By limiting environmental exposure to the display and buttons, this accessory contributes to sustained measurement accuracy and lower long‑term maintenance effort for weighing systems. Simple compatibility and low handling effort for workshop use Designed specifically for the PCD.250-3 indicator, the hood ensures precise compatibility with the mounting and shape of the device; the fit reduces the risk of accidental displacement while accessing controls. The cover’s lightweight design keeps added mass minimal and makes handling straightforward during routine checks or when the indicator needs to be moved. The practical form factor means no special tools are required for fitting, so integration into daily workflows is immediate and transparent. Practical supply and dependable sourcing for uninterrupted operation Supplied as a convenient set, the cover streamlines replenishment for workshops and service departments that maintain several weighing stations. Sourcing via Metav Werkzeuge offers a reliable logistics channel and access to a broad range of complementary accessories, combining rapid dispatch from Emmerich with a wide product range. This procurement route supports predictable stock management and reduces the number of supplier interfaces, aiding continuous operation across production and inspection environments. For advice on suitability and to arrange supply of KERN accessories, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone on +49 2822 7131930 for personalised assistance and ordering options Technical data SKU: PCD-A05S05 Manufacturer: KERN GTIN: 4045761185319 Origin: CN HS code: 39269097 Facts Article number: PCD Net weight: 0.02 kg Special features Compatible with PCD.250-3 indicators Delivered as set of 5 Product category: Scales accessories Rapid dispatch noted in product brief FAQ What is the Protective cover designed to protect? The protective hood shields the indicator’s display and controls from dust and light contamination, maintaining clear operation of the PCD.250-3 indicator. Is this KERN accessory compatible with other indicator models? Compatibility is specified for the PCD.250-3; similar housings are model-specific, so check dimensions before fitting other devices. How does the cover affect maintenance routines? By reducing dust ingress and surface soiling, the cover helps decrease cleaning frequency and supports stable measurement behaviour for the indicator. Does the set include multiple covers for workshop stocking? The product is supplied as a practical set, intended to simplify replacement planning and keep several stations protected. Metav Werkzeuge · Emmerich am Rhein · Email: info@metav-werkzeuge.com · Phone: +49 2822 7131930

Elevate the weighing terminal with a compact, KERN-compatible stand offering approx. 250 mm lift and a lightweight 0.5 kg profile; stable positioning and improved readability support efficient, repeatable weighing. Combine ergonomic height, sturdy mounting and simple integration for uninterrupted workflow. Order the stand directly via Metav Werkzeuge or ask our consultants if needed. PCD-A03 mounting stand — KERN accessory, approx. 250 mm height PCD-A03 is a practical mounting stand designed to raise weighing evaluation units for improved visibility and ergonomic access in industrial and workshop environments. Stand height approx. 250 mm Elevates KERN evaluation unit for clear visibility Lightweight construction, approx. 0.5 kg Robust accessory for scales and balance setups Better readability and fewer handling errors through elevated display Raising the weighing terminal by 250 mm improves viewing angle and reduces the need to bend or reposition parts during measurement, which supports faster, more reliable data capture. The mounting solution positions the evaluation unit clearly above the workbench level, making numerical readouts and status indicators immediately legible. This ergonomic benefit contributes to smoother processes and fewer interruptions in routine weighing tasks. Compact support that suits workshop workflows The compact, lightweight design offers simple relocation between workstations without adding bulk to the bench. Despite its modest mass of about 0.5 kg, the support provides steady placement for common weighing terminals used in production and inspection. The small footprint preserves bench space while keeping the weighing interface at a comfortable height, enabling straightforward handling and reduced workstation clutter. Fast integration and consistent measuring conditions Designed as an accessory for scales and balances, the mounting stand allows consistent positioning of the terminal, which aids repeatability across successive measurements. By stabilising the display and connectors, the stand reduces disturbances that can lead to misreads or rechecks. Presentation and cable routing remain tidy, supporting an efficient measurement routine and clearer documentation of results in quality workflows. Contact Metav Werkzeuge in Emmerich to arrange supply of the KERN PCD-A03 mounting stand or to request additional technical details by email at info@metav-werkzeuge.com Technical data Article number: PCD-A03 Manufacturer: KERN GTIN: 4045761134027 Origin: China Weight: 0.5 kg Tariff number: 73269098 Facts Stand height: approx. 250 mm Weight: 0.5 kg Category: Accessories for scales and balances SKU: PCD-A03 Special features Elevates evaluation unit for improved visibility Intended as a scale/balance accessory Compact, space-saving design Facilitates ergonomic operation FAQ Is the stand suitable for all KERN evaluation units? The PCD-A03 stand is designed for use with KERN evaluation units; compatibility with specific models should be checked against the unit's base or mounting interface. Does the stand include mounting hardware? Product data does not specify included fittings; consult the product sheet or Metav Werkzeuge for details on required adapters or mounting parts. Can the stand be moved between different workstations easily? The lightweight design of the PCD-A03 supports simple relocation within the workshop while maintaining stable positioning for consistent readings. Will using the stand improve measurement repeatability? Elevating and stabilising the display can reduce handling variation and visual misreads, supporting more consistent measurement workflows with KERN terminals. Manufacturer: KERN; Origin: China; No manufacturer address or contact provided

Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930

Take advantage of precise conformity and robust construction combined for dependable calibration routines; the OIML F1 tolerance and polished stainless steel finish ensure reproducible results and long service life. Order the KERN 326-12 calibration weight directly via Metav Werkzeuge or ask our consultants if needed. KERN 326-12 calibration weight — 2 kg, OIML F1, polished stainless steel The KERN 326-12 calibration weight is a single precision mass in Eco‑Form for laboratory and workshop calibration of balances and scales. OIML class F1 for verified accuracy Nominal mass 2 kg in Eco‑Form Polished stainless steel construction Compact cylinder 60 × 102 mm Accuracy that integrates with calibration routines The OIML F1 classification of this calibration mass provides a clearly defined tolerance of 10 mg, making it suitable for routine verification and adjustment of precision balances where class F1 is required. Specification conformity reduces uncertainty in measurement chains and supports documented traceability when used as part of a calibration procedure. The nominal 2 kg mass and certified tolerance mean fewer intermediate checks are necessary, contributing to greater operational efficiency and consistent measurement results. Durable form and material for frequent handling Manufactured in polished stainless steel, the Eco‑Form cylinder is designed for daily handling and easy cleaning while resisting corrosion and surface damage. The compact 60 × 102 mm cylinder profile gives a small footprint in storage and a stable centre of gravity during use, aiding repeatable placement on balance plates. The smooth finish minimises contamination risk and simplifies maintenance, which helps to preserve calibration quality over time. Operational benefits: predictable workflow and reduced downtime Using a certified single mass streamlines verification steps and shortens calibration routines, delivering measurable time savings in busy workshops and service departments. The robust construction supports repeated handling without rapid wear, so calibration intervals remain stable and service interruptions are reduced. Combined with documented conformity, this mass supports reliable inventory of test equipment and sound quality assurance processes in production and lab environments. For supply and specialist advice on OIML F1 calibration masses, contact Metav Werkzeuge in Emmerich for sourcing and technical guidance via info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: 326-12 Article number: 326 GTIN: 4045761223646 Manufacturer: KERN Country of origin: Germany Dimensions & tolerances Nominal mass: 2 kg Cylinder dimensions: 60 × 102 mm OIML class: F1 Tolerance (OIML F1): 10 mg Special features Eco‑Form design Polished stainless steel material Single calibration weight HS code: 84239090 FAQ Is this calibration weight suitable for routine balance verification? The KERN 326-12 calibration weight (OIML class F1) is intended for routine verification and adjustment of precision balances where F1 tolerance is specified. How should the stainless steel weight be stored to maintain accuracy? Store the KERN 326-12 in a clean, dry environment at stable temperature and avoid direct contact with corrosive substances to preserve surface condition and measurement stability. Can this weight be used for legal-for-trade calibrations? The OIML F1 classification indicates suitability for laboratory and industrial calibration tasks; legal-for-trade requirements depend on local regulations and may require different OIML classes. What practical advantage does the Eco‑Form bring? The Eco‑Form provides a compact, stable profile that eases handling and storage while maintaining the required mass distribution for repeatable placements on balance platforms. Manufacturer: KERN, Germany. Contact details not provided.

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of hands-free operation combined with selectable TARE or PRINT control and a compact, workshop-ready design for faster weighing cycles. Order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKF-01 Foot switch for PCD.250-3 — KERN, selectable TARE/PRINT control The YKF-01 is a foot switch designed to enable hands-free TARE or PRINT signalling for compatible scales, optimised for busy workshop and production environments where two free hands are required. Hands-free TARE or PRINT control Includes foot switch, junction box and cable PRINT function requires RS-232 interface cable Compact 0.25 kg unit for workshop use Faster, hands-free weighing for more efficient workflows The foot switch allows rapid, repeatable triggering of weighing functions so operators can keep both hands on the workpiece. By providing selectable TARE and PRINT outputs the device reduces cycle times and the risk of contamination from manual intervention. The PRINT option is suitable for automated data capture but requires a dedicated RS-232 interface cable for full functionality, ensuring reliable data transfer to printers or PC systems. This solution is ideal for repetitive tasks and for setups where ergonomics and speed are priorities. Simple installation that integrates without fuss Connection is simplified by the supplied junction box and connection cable, which are designed for straightforward wiring to compatible indicators. The unit’s compact form and low mass (0.25 kg) permit installation close to the operator without adding bulk to the workstation. Compatibility with scale models such as the PCD.250-3 is maintained through a standardised interface approach, so existing systems can be extended without major adaptation. Where the print function is required, the separate RS-232 cable (KERN interface cable) completes the link to peripherals. Dependable partner for professional environments The YKF-01 foot switch from KERN is built for continuous workshop use and supports consistent process control in industry and craft applications. Metav Werkzeuge provides distribution and expert advice, backed by decades of precision competence and a broad product portfolio, helping to reduce supplier complexity. The supplied components are clearly stated in the scope of delivery to set expectations and support straightforward commissioning of the accessory in production or inspection workflows. Contact Metav Werkzeuge today for tailored advice on integrating the KERN YKF-01 foot switch into your weighing setup and to arrange supply — email info@metav-werkzeuge.com or call +49 2822 7131930. Technical data Article number: YKF-01 Manufacturer: KERN Scope of delivery: foot switch, junction box, connection cable Facts Weight: 0.25 kg ECLASS: 27371217 Special features Selectable TARE or PRINT control PRINT function requires RS-232 interface cable (not included) Compatible with PCD.250-3 Category: Scales accessory FAQ Is the foot switch compatible with the PCD.250-3? The YKF-01 foot switch (KERN) is designed for compatibility with the PCD.250-3 and connects via the supplied junction box and connection cable. Is an RS-232 cable included for printing? No, the YKF-01 includes the junction box and connection cable; the RS-232 interface cable required for the PRINT function must be obtained separately (KERN interface cable). What functions can be triggered with the foot switch? The device can trigger TARE or PRINT functions; switching between these modes is supported by the unit’s signalling options. How heavy and compact is the unit for bench mounting? The YKF-01 foot switch weighs 0.25 kg and is deliberately compact for convenient mounting near the weighing station. What is included in the delivery when ordering the foot switch? Delivery contains the foot switch, a junction box and a connection cable as stated in the product’s scope of delivery. KERN — Manufacturer. Distributor: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930