2100 g Precision Balance 0.001 g Readability, Graphic LCD, Stainless Steel Pan, Internal Calibration - KERN

Benefit from a hook designed specifically for underfloor hanging-load weighing, combining compatibility with KERN precision scales and reliable construction for repeatable measurements; order the accessory directly via Metav Werkzeuge or consult our specialists for application advice and delivery options. Hook PLJ-A02 – Underfloor weighing hook for KERN precision scales The Hook PLJ-A02 is a dedicated lifting accessory for underfloor weighing applications, intended to secure suspended loads for precise measurements with KERN precision scales. For underfloor hanging-load weighing Compatible with KERN precision scales Robust German origin design Rapid dispatch available Accurate handling of suspended loads for repeatable results The accessory is engineered to support underfloor weighing tasks where suspended loads require secure attachment and stable positioning. By providing a defined mechanical interface for load suspension, the component reduces measurement variability and helps maintain traceable weighing results. The design focuses on repeatability rather than decorative aspects, so workshop workflows benefit from fewer re-checks and more predictable process times. The compatibility with established scale systems simplifies integration into existing measurement setups. Seamless integration into KERN scale systems for efficient workflows Compatibility with KERN precision scales ensures the hook works as part of a calibrated measurement chain, enabling straightforward installation and consistent data capture. Where scale interfaces are standardised, the accessory allows rapid attachment and removal of loads without lengthy reconfiguration. The mechanical coupling is intended to be robust and simple to use, which lowers downtime between measurements and supports higher throughput in production environments that rely on accurate weight data. Practical supply and traceability for professional workshops With German origin and clear identification via GTIN and SKU, the item supports professional procurement and inventory management. The accessory is documented for easier stock keeping and audit trails, aligning with workshop demands for traceable components. Rapid dispatch options from the supplier reduce lead times, helping to maintain continuous operation at the bench or on the shop floor. For buyers seeking reliable measurement accessories, the documented provenance and catalogue references simplify acceptance into standard tool lists. Contact Metav Werkzeuge in Emmerich to confirm compatibility with existing KERN scales and to arrange supply of the PLJ-A02 — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise ordering information and delivery from our Emmerich warehouse Technical data Article number: PLJ-A02 Manufacturer: KERN GTIN: 4045761106932 Origin: DE Facts Tariff number (HS): 90160090 eCl@ss: 27400890 Special features Accessory for underfloor weighing of suspended loads Suitable for use with KERN precision scales Category: Scales › Accessories FAQ What is the primary purpose of this hook? The PLJ-A02 hook is designed for securing suspended loads during underfloor weighing to enable repeatable and stable measurements with precision scales. Is the hook compatible with KERN scales? Yes, the accessory is specified for use with KERN precision scales, offering a direct mechanical interface suitable for standard weighing setups. What load capacity does the hook support? No maximum load is specified in the available product data for the PLJ-A02; the technical dataset does not include a rated capacity. How is the PLJ-A02 identified for procurement? The component is listed under SKU PLJ-A02 with GTIN 4045761106932 and tariff number 90160090 for ordering and inventory purposes. KERN · Origin: Germany · Seller: Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930

Take advantage of highly reproducible measurements and a robust, polished stainless-steel design: the compact form and OIML Class E2 tolerance ensure reliable calibration results and long service life. Order the weight directly via Metav Werkzeuge or consult our specialists for accessory recommendations. KERN 316-12 Single calibration weight (2 kg, OIML E2, polished stainless steel) The KERN 316-12 is a compact calibration weight designed for precise verification of laboratory and industrial scales, combining traceable accuracy with a corrosion-resistant finish. OIML Class E2 accuracy for legal verification Nominal value 2 kg for mid-range calibrations Polished stainless steel construction for durability Compact form for easy storage and handling Ensure measurement conformity with certified accuracy The OIML Class E2 rating of this calibration weight guarantees a narrow permissible error band, with a stated tolerance of 3 mg, making it suitable for high-precision verification tasks in calibration laboratories and in-process quality control. Using a class E2 test mass supports documented conformity to relevant standards and simplifies traceability chains. The 2 kg nominal value covers a common verification range for analytical and precision balances, so calibration routines can be standardised and performed more efficiently, reducing downtime and rework. Robust materials and compact handling for everyday use Constructed from polished stainless steel, this compact verification mass resists corrosion and surface wear, sustaining its metrological properties over repeated use. The compact form supports straightforward handling and minimises the footprint in a calibration kit or workshop cabinet. Due to the fine tolerance inherent in its class, a protective case is recommended to maintain accuracy during storage and transport—Metav offers suitable etuis and accessories to protect the mass and prolong its service life. The combination of durability and compactness reduces replacement frequency and supports reliable long-term performance. Integrate traceable weights into reliable workflows Adopting a certified single weight like the KERN 316-12 simplifies periodic verification schedules and aids accreditation efforts by providing a verifiable reference point for balance checks. Clear labelling and a stable material finish assist in routine visual inspections, while the weight’s origin from a recognised manufacturer supports supplier qualification processes. Sourcing from a partner such as Metav Werkzeuge ensures consistent availability and a central supply chain that helps reduce the number of suppliers and secures on-time delivery to the workshop or laboratory. For dependable calibration equipment and advice on suitable protective etuis, contact Metav Werkzeuge to discuss the KERN 316-12 and matching accessories for your quality routine Technical data Article number: 316 SKU: 316-12 GTIN: 4045761094932 Manufacturer: KERN Origin: DE Facts Nominal mass: 2 kg OIML tolerance: 3 mg Dimensions (cylinder): 60×94 mm Tariff number: 84239090 eClass: 32120103 Special features Polished stainless steel Compact form OIML Class E2 Single calibration weight Recommendation: use protective case for class E2 mass FAQ What accuracy class does this calibration weight have? The KERN 316-12 is certified to OIML Class E2, offering a tight tolerance of 3 mg suitable for precision verification tasks. Is the weight suitable for laboratory and industrial balances? Yes, the 2 kg nominal value makes this weight appropriate for both laboratory analytical balances and industrial precision scales requiring mid-range verification. How should the polished stainless-steel surface be maintained? Clean the surface with a soft, lint-free cloth and a mild, non-abrasive cleaner; avoid corrosive agents to preserve the finish and metrological integrity of the calibration weight. Is a protective case necessary for this weight? Due to the fine tolerance of an E2-class mass, a protective case is recommended to prevent contamination and mechanical damage during storage and transport. Can this weight support traceability and accreditation needs? Yes, the documented OIML Class E2 specification of the KERN 316-12 supports traceability requirements and can be integrated into accredited calibration procedures. KERN – Germany; Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930

Take advantage of the combination of lightweight protection, straightforward compatibility and easy replacement to keep weighing stations clean and operational; order the accessory directly via Metav Werkzeuge or ask the consultants for detailed advice. Protective Hood PLJ-A01S05 – scale accessory for MPLS.420-3F, by KERN A Protective Hood PLJ-A01S05 designed as an accessory for MPLS.420-3F scales, offering simple protection against dust and incidental splashes during routine weighing and handling. Protective hood for MPLS.420-3F scales Supplied as a five-piece set Extremely lightweight at 0.03 kg Extend the service life of weighing equipment with minimal effort The protective hood acts as a practical barrier that reduces contamination of the weighing area and associated components, helping to preserve calibration intervals and reduce cleaning effort. As an accessory specifically matched to the MPLS.420-3F series, the cover provides straightforward compatibility with the relevant enclosure geometry, enabling faster installation and removal. The lightweight construction contributes negligible bulk while offering a visible improvement in day‑to‑day cleanliness, which supports consistent measurement quality and lowers indirect maintenance costs. Keep workflows efficient with ready replacements Supplied as a set, the covers allow for quick rotation and replacement during scheduled cleaning or when wear is observed, minimising downtime in production and laboratory routines. The option to replace a single item from the set ensures continuity of operation while spare pieces are sanitised or stored. This practical supply approach supports continuous throughput in busy environments, where simple consumables must not interrupt process flow or shift productivity. Simple storage and handling for busy environments The compact form and low weight make the covers easy to store near the weighing station without occupying valuable bench space. Their manageable size reduces handling time during changeovers and keeps ancillary tasks brief, so focus remains on measurement tasks rather than on managing protective equipment. Clear labelling and a consistent accessory format mean stores and toolrooms can keep inventory under control and minimise procurement overhead. OEM alignment and traceable identification As an accessory from KERN, the hood is designed to match the intended application and mechanical interfaces of the MPLS.420-3F series, ensuring a predictable fit and function. Traceable identification via the SKU supports stock control and reorder accuracy, while origin information contributes to supply‑chain transparency. This alignment reduces the risk of ill-fitting substitutes and supports a reliable maintenance plan that safeguards measurement accuracy over time. For original KERN accessories such as the PLJ-A01S05 protective hood and for ordering or technical advice, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 (WhatsApp +49 170 2837271) Technical data Article number: PLJ SKU: PLJ-A01S05 GTIN: 4045761186972 Manufacturer: KERN Country of origin: IT Facts Weight: 0.03 kg eClass: 24322502 Tariff number: 39269097 Special features Compatibility: for MPLS.420-3F series Scope of delivery: five covers per set Category: Scales > Accessories FAQ What is the primary purpose of this hood? The protective hood is intended to reduce dust and incidental splashes on the weighing area, helping to maintain cleanliness and support consistent measurements for the MPLS.420-3F series. Is this an original KERN accessory? Yes, the item is a KERN accessory supplied under SKU PLJ-A01S05 and is specified for use with the MPLS.420-3F scales. Can the covers be replaced individually? Covers supplied in the set can be rotated and replaced individually to allow ongoing operation while others are being cleaned or put into storage. How does this accessory benefit routine maintenance? By reducing contamination, the hood contributes to longer intervals between detailed cleanings, which can lower indirect maintenance effort and help preserve calibration stability. Manufacturer: KERN; Address: –; Contact: –

Benefit from electrostatic neutralisation and a compact, adjustable design for consistent, gram‑accurate results in precision weighing; the device’s low ozone output adds safety while keeping air quality within typical laboratory tolerances. Order the ioniser directly via Metav Werkzeuge or ask our consultants for application advice. KERN YBI-01A Ioniser — neutralises electrostatic charge, low ozone emission The KERN YBI-01A ioniser is a compact device for neutralising electrostatic charge on non-conductive weighing items beside precision balances and laboratory scales, enabling more reliable milligram‑level results. Neutralises static charge for precise weighing Low ozone emission 0.05 ppm/h Compact 115 x 110 x 80 mm footprint Adjustable feet or handheld targeting Achieve repeatable, gram‑accurate weighing through targeted electrostatic neutralisation Electrostatic charge on non-conductive materials such as plastic, porcelain or glass can create an electromagnetic field between the sample and the balance, leading to measurement errors that may reach the gram scale. The ioniser removes residual charge by producing a balanced stream of positive and negative ions, allowing the balance to register the true mass without drift or attraction. This results in fewer retests, reduced sample handling and higher process throughput — a clear efficiency gain for laboratories and quality control stations that demand reproducible micro‑ and milligram results. The effect is particularly noticeable when handling light or small parts where even slight electrostatic influence can distort the outcome. Flexible positioning for bench integration and targeted use Designed for easy placement, the unit fits beside most laboratory balances thanks to its compact dimensions and low weight. It can be set on adjustable feet for stable bench mounting or used handheld to address critical points on awkwardly shaped components. The small footprint allows integration without altering the weighing workflow, and the option for targeted ionisation supports fast intervention during sample preparation. These features make it suitable for production benches, research labs and trade environments where space is limited but measurement integrity is essential. Safe, straightforward operation compatible with international mains supplies Operation is straightforward: the device runs from a plug‑in power supply that accepts 100–240 V input and is supplied with adapters for AUS, CH, EURO, UK and US sockets, ensuring compatibility in multi‑site operations. With an ozone emission of 0.05 ppm/h, the unit maintains low by‑product levels, supporting safe use in laboratory environments when normal ventilation procedures are followed. Lightweight and portable, the unit requires minimal setup and little maintenance, delivering a practical static‑control solution that complements established weighing equipment and standard operating procedures. Contact Metav Werkzeuge for tailored advice on integrating the KERN YBI-01A ioniser into existing weighing processes or to request application guidance from our specialists in Emmerich Technical data Article number: YBI-01A Manufacturer: KERN GTIN: 4045761194984 Country of origin: Italy Core specifications Dimensions: 115 x 110 x 80 mm Weight: 0.44 kg Input voltage: 100 V - 240 V Ozone emission: 0.05 ppm/h Tariff code: 90160090 Features & compatibility For non-conductive weighing items: plastic, porcelain, glass Placement: adjustable feet or handheld targeting Power supply: adapters included for AUS; CH; EURO; UK; US Power supply type: plug-in power supply eClass: 17111116 FAQ How does the ioniser prevent weighing errors caused by static charge? The device neutralises electrostatic charge by emitting a balanced flow of positive and negative ions; this reduces the electromagnetic interaction between sample and balance and stabilises readings when using the KERN YBI-01A ioniser. Can this device be used with all types of laboratory balances? Yes; the static eliminator is intended for use beside precision balances and scales, particularly where non-conductive materials are weighed and electrostatic effects are a known issue. Is the ozone emission of the unit safe for laboratory use? The ioniser has a measured ozone emission of 0.05 ppm/h, a low level suitable for normal laboratory operation when standard ventilation practices are observed. What power connections are supplied with the unit? A plug‑in power supply accepting 100–240 V is provided, together with adapters for AUS, CH, EURO, UK and US sockets to facilitate use across multiple sites. Will the unit reduce the need for re‑weighing and sample handling? By neutralising charge on light and non-conductive samples, the device reduces measurement drift and attraction errors, which in turn lowers the frequency of retests and extra handling. Manufacturer: KERN — Address: not specified — Contact: not specified

Take advantage of precise static control and quick retrofit installation to reduce weighing errors and downtime; the integrated ioniser neutralises electrostatic charge while the panel replaces the existing glass rear panel, maintaining enclosure integrity. Order the KERN ALJ-A03 via Metav Werkzeuge or consult our advisors for application guidance. Draft-shield rear panel (KERN ALJ-A03) with integrated ioniser for scales A Draft-shield rear panel fitted with an integrated ioniser, designed to replace the glass rear panel of a weighing draft shield and to neutralise electrostatic charges that can skew sensitive measurements. *Integrated ioniser neutralises electrostatic charge *Replaces existing glass rear panel of the draft shield *Compact, lightweight design (0.53 kg) Ensure measurement reliability by removing electrostatic interference The addition of an integrated ioniser directly addresses the common source of weighing variation caused by electrostatic charge on samples, packaging or containers. In laboratory and industrial weighing, even minute static fields can attract or repel the pan load and distort results; the retrofittable rear panel provides targeted neutralisation inside the draft shield, improving repeatability and reducing the need for repeated tare cycles. This technical improvement translates into measurable time savings and fewer rejected readings. Fast retrofit that preserves enclosure performance and workflow Designed to be mounted in place of the existing glass rear panel, the replacement panel offers a straightforward upgrade path for balances and enclosed weighing stations without altering the front enclosure or balance mounting. The lightweight 0.53 kg construction keeps handling safe while minimising the risk of imbalance or stress on the draft shield assembly. As a factory-option accessory from KERN, the component integrates with standard enclosures and helps reduce downtime compared with complete enclosure replacement. Practical applications and reduced process variability The panel is particularly effective when weighing powders, films or charged plastics where static can produce inconsistent readings. By neutralising charge inside the weighing enclosure, the solution supports tighter process control in QC checks, formulation tasks and laboratory dosing operations. Specifying this accessory helps standardise measurement conditions across multiple workstations, supporting traceable procedures and better overall quality assurance. Request the KERN ALJ-A03 through Metav Werkzeuge for improved static control in weighing enclosures — contact our consultants at info@metav-werkzeuge.com or call +49 2822 7131930 for detailed compatibility advice. Technical Data Article number: ALJ-A03 Manufacturer: KERN SKU: ALJ-A03 GTIN: 4045761206809 Country of origin: CN Facts Net weight: 0.53 kg Commodity code: 90160090 Special features Integrated ioniser for neutralising electrostatic charge Mounts instead of existing glass rear panel Factory option Product category: Scales accessories FAQ How does the integrated ioniser improve weighing results? The integrated ioniser in the KERN rear panel neutralises electrostatic charge within the draft shield, reducing attraction or repulsion effects that cause unstable or drifting readings. Is the panel compatible with existing draft shields? Compatibility depends on the draft shield geometry; the KERN ALJ-A03 is designed to replace the glass rear panel of standard weighing enclosures, and further compatibility details can be provided by Metav Werkzeuge. Will installation require modification of the balance? The panel is intended as a retrofit replacement for the rear glass panel and normally requires no modification to the balance itself; exact fitment should be checked against the enclosure model. Can the accessory be used in environments with sensitive samples such as powders or films? Yes, the neutralising function of the KERN rear panel helps stabilise measurements for charged powders, films and plastic components, lowering variability in such applications. KERN — Origin: CN, SKU ALJ-A03

Take advantage of electrostatic neutralisation, flexible placement and seamless rear-panel integration to secure reliable milligram results and reduce reweighs. Order the unit directly via Metav Werkzeuge or contact our consultants for advice on fitting and compatibility. ABP-A01 — KERN windscreen back panel with integrated ioniser for precision balances The ABP-A01 is a windscreen back panel with an integrated ioniser that neutralises electrostatic charges during fine weighing, designed for laboratory and industrial balance applications. Neutralises electrostatic charge for precise weighing Integrated ioniser for compact rear-panel fitting Positionable with stand or handheld operation Reduces weighing errors in milligram range Achieve milligram accuracy by removing electrostatic influence Electrostatic charging on non-conductive samples creates a small electromagnetic field between the sample and the balance, which can distort results by grams or milligrams. The ABP-A01 uses a controlled ioniser function to neutralise that charge, stabilising the measurement environment and enabling precision weighing even with lightweight specimens. This direct reduction of measurement variability supports reproducible results and fewer repeat measurements, improving throughput and reducing material waste. Flexible placement that adapts to existing workflows The design allows the ioniser to be placed beside the balance using a stand or directed by hand for targeted neutralisation, giving operators flexibility during routine tasks. When ordered together with compatible models in the ABP series, professional rear-panel integration is offered to fit the unit cleanly into the balance enclosure, preserving the bench layout and minimising interference. The combination of portability and fixed integration supports a smooth workflow between bench tasks and analytical routines. Straightforward compatibility and simple function explanation Installation and operation are deliberately simple: the module neutralises charged particles near the weighing chamber so technicians need not alter weighing technique. Where rear-panel fitting is requested, the ABP-A01 is prepared for professional integration with ABP-series balances, ensuring correct alignment and electrical routing. The result is an unobtrusive addition to the setup that delivers consistent repeatability without complex adjustments. Designed for common non-conductive samples and routine use Materials such as plastic, porcelain and glass are particularly prone to electrostatic charging; the ABP-A01 is specified to address these cases and to support routine quality control and laboratory analysis. Built to be a compact and practical accessory, it complements balances used in analytical laboratories, quality departments and technical workshops where reliable low-mass measurement is essential. The accessory’s features focus on measurable benefits: fewer reweighs, clearer data and a more efficient weighing process. Contact Metav Werkzeuge in Emmerich for tailored advice on integrating the KERN ABP-A01 into existing balances — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss fitting options and supply Technical data Article number: ABP-A01 Manufacturer: KERN GTIN: 4045761213975 SKU: ABP-A01 Weight: 0.85 kg Country of origin: PH Tariff code: 90160090 Category: Waagen > Zubehör eClass: 22330605 Core specifications Weight: 0.85 kg GTIN: 4045761213975 Tariff code: 90160090 eClass: 22330605 Special features Integrated ioniser for electrostatic neutralisation Suitable for non-conductive weighing goods (plastic, porcelain, glass) Placement: stand or handheld operation Option: rear-panel fitting with ABP series balances (service integration) Rapid dispatch from webshop FAQ How does the ioniser improve weighing accuracy? The ABP-A01 neutralises electrostatic charges that create fields between non-conductive samples and the balance, reducing measurement deviation and improving stability in the milligram range. Can the ioniser be fitted to existing ABP-series balances? Yes; when ordered in combination with an ABP-series model, the ABP-A01 can be professionally integrated into the rear panel to ensure a neat fit and correct alignment. Which sample types benefit most from the ioniser? Non-conductive materials such as plastic, porcelain and glass are most affected by static charge; the ABP-A01 is specified to reduce those effects and improve repeatability. Is the unit suitable for routine quality-control weighing? The ABP-A01 provides consistent neutralisation and supports repeatable weighing procedures, making it appropriate for routine QC and analytical tasks. Manufacturer: KERN — Address: Philippines — Contact: via Metav Werkzeuge, info@metav-werkzeuge.com, +49 2822 7131930

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271