6200 g Precision Balance 0.01 g Readability Graphic LCD, Stainless Steel Pan 160 mm, Internal Calibration - KERN

Benefit from a hook designed specifically for underfloor hanging-load weighing, combining compatibility with KERN precision scales and reliable construction for repeatable measurements; order the accessory directly via Metav Werkzeuge or consult our specialists for application advice and delivery options. Hook PLJ-A02 – Underfloor weighing hook for KERN precision scales The Hook PLJ-A02 is a dedicated lifting accessory for underfloor weighing applications, intended to secure suspended loads for precise measurements with KERN precision scales. For underfloor hanging-load weighing Compatible with KERN precision scales Robust German origin design Rapid dispatch available Accurate handling of suspended loads for repeatable results The accessory is engineered to support underfloor weighing tasks where suspended loads require secure attachment and stable positioning. By providing a defined mechanical interface for load suspension, the component reduces measurement variability and helps maintain traceable weighing results. The design focuses on repeatability rather than decorative aspects, so workshop workflows benefit from fewer re-checks and more predictable process times. The compatibility with established scale systems simplifies integration into existing measurement setups. Seamless integration into KERN scale systems for efficient workflows Compatibility with KERN precision scales ensures the hook works as part of a calibrated measurement chain, enabling straightforward installation and consistent data capture. Where scale interfaces are standardised, the accessory allows rapid attachment and removal of loads without lengthy reconfiguration. The mechanical coupling is intended to be robust and simple to use, which lowers downtime between measurements and supports higher throughput in production environments that rely on accurate weight data. Practical supply and traceability for professional workshops With German origin and clear identification via GTIN and SKU, the item supports professional procurement and inventory management. The accessory is documented for easier stock keeping and audit trails, aligning with workshop demands for traceable components. Rapid dispatch options from the supplier reduce lead times, helping to maintain continuous operation at the bench or on the shop floor. For buyers seeking reliable measurement accessories, the documented provenance and catalogue references simplify acceptance into standard tool lists. Contact Metav Werkzeuge in Emmerich to confirm compatibility with existing KERN scales and to arrange supply of the PLJ-A02 — email info@metav-werkzeuge.com or call +49 2822 7131930 for precise ordering information and delivery from our Emmerich warehouse Technical data Article number: PLJ-A02 Manufacturer: KERN GTIN: 4045761106932 Origin: DE Facts Tariff number (HS): 90160090 eCl@ss: 27400890 Special features Accessory for underfloor weighing of suspended loads Suitable for use with KERN precision scales Category: Scales › Accessories FAQ What is the primary purpose of this hook? The PLJ-A02 hook is designed for securing suspended loads during underfloor weighing to enable repeatable and stable measurements with precision scales. Is the hook compatible with KERN scales? Yes, the accessory is specified for use with KERN precision scales, offering a direct mechanical interface suitable for standard weighing setups. What load capacity does the hook support? No maximum load is specified in the available product data for the PLJ-A02; the technical dataset does not include a rated capacity. How is the PLJ-A02 identified for procurement? The component is listed under SKU PLJ-A02 with GTIN 4045761106932 and tariff number 90160090 for ordering and inventory purposes. KERN · Origin: Germany · Seller: Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930

Take advantage of the combination of lightweight protection, straightforward compatibility and easy replacement to keep weighing stations clean and operational; order the accessory directly via Metav Werkzeuge or ask the consultants for detailed advice. Protective Hood PLJ-A01S05 – scale accessory for MPLS.420-3F, by KERN A Protective Hood PLJ-A01S05 designed as an accessory for MPLS.420-3F scales, offering simple protection against dust and incidental splashes during routine weighing and handling. Protective hood for MPLS.420-3F scales Supplied as a five-piece set Extremely lightweight at 0.03 kg Extend the service life of weighing equipment with minimal effort The protective hood acts as a practical barrier that reduces contamination of the weighing area and associated components, helping to preserve calibration intervals and reduce cleaning effort. As an accessory specifically matched to the MPLS.420-3F series, the cover provides straightforward compatibility with the relevant enclosure geometry, enabling faster installation and removal. The lightweight construction contributes negligible bulk while offering a visible improvement in day‑to‑day cleanliness, which supports consistent measurement quality and lowers indirect maintenance costs. Keep workflows efficient with ready replacements Supplied as a set, the covers allow for quick rotation and replacement during scheduled cleaning or when wear is observed, minimising downtime in production and laboratory routines. The option to replace a single item from the set ensures continuity of operation while spare pieces are sanitised or stored. This practical supply approach supports continuous throughput in busy environments, where simple consumables must not interrupt process flow or shift productivity. Simple storage and handling for busy environments The compact form and low weight make the covers easy to store near the weighing station without occupying valuable bench space. Their manageable size reduces handling time during changeovers and keeps ancillary tasks brief, so focus remains on measurement tasks rather than on managing protective equipment. Clear labelling and a consistent accessory format mean stores and toolrooms can keep inventory under control and minimise procurement overhead. OEM alignment and traceable identification As an accessory from KERN, the hood is designed to match the intended application and mechanical interfaces of the MPLS.420-3F series, ensuring a predictable fit and function. Traceable identification via the SKU supports stock control and reorder accuracy, while origin information contributes to supply‑chain transparency. This alignment reduces the risk of ill-fitting substitutes and supports a reliable maintenance plan that safeguards measurement accuracy over time. For original KERN accessories such as the PLJ-A01S05 protective hood and for ordering or technical advice, contact Metav Werkzeuge in Emmerich by email at info@metav-werkzeuge.com or by phone at +49 2822 7131930 (WhatsApp +49 170 2837271) Technical data Article number: PLJ SKU: PLJ-A01S05 GTIN: 4045761186972 Manufacturer: KERN Country of origin: IT Facts Weight: 0.03 kg eClass: 24322502 Tariff number: 39269097 Special features Compatibility: for MPLS.420-3F series Scope of delivery: five covers per set Category: Scales > Accessories FAQ What is the primary purpose of this hood? The protective hood is intended to reduce dust and incidental splashes on the weighing area, helping to maintain cleanliness and support consistent measurements for the MPLS.420-3F series. Is this an original KERN accessory? Yes, the item is a KERN accessory supplied under SKU PLJ-A01S05 and is specified for use with the MPLS.420-3F scales. Can the covers be replaced individually? Covers supplied in the set can be rotated and replaced individually to allow ongoing operation while others are being cleaned or put into storage. How does this accessory benefit routine maintenance? By reducing contamination, the hood contributes to longer intervals between detailed cleanings, which can lower indirect maintenance effort and help preserve calibration stability. Manufacturer: KERN; Address: –; Contact: –

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of a dependable RS-232 connection and a practical 1.5 m cable length to integrate weighing equipment into existing data workflows with minimal effort; combine reliability and straightforward installation for uninterrupted measurement logging. Order the interface cable directly via Metav Werkzeuge or consult our advisors for application guidance. KERN RS-232 interface cable 572-926 — RS-232 connection, 1.5 m cable The KERN RS-232 interface cable 572-926 is a dedicated accessory for scales and weighing systems that enables stable serial data transfer between instruments and computers. RS-232 interface for reliable data transfer Cable length 1.5 m for flexible placement Accessory for scales and weighing systems Seamless data transfer for weighing workflows The RS-232 connection provides a proven, low-latency way to export measurement values from a scale to a PC, printer or data logger. With a 1.5 m cable length the lead offers practical reach across a bench or workstation without excess slack, simplifying cable routing. As an accessory designed for weighing equipment, the cable reduces interruptions in data acquisition and supports continuous logging processes, which is particularly useful where serial output remains the standard for industrial metrology. The compact design and light weight contribute to simple handling and less strain on instrument ports. Robust serial interface explained for practical use The serial standard implemented by this cable is valued for its stability in industrial and workshop environments. Unlike many casual consumer connections, RS-232 maintains clear signal levels over short runs and is tolerant of typical workshop interference when properly installed. The cable serves as a direct link for numeric transfer and simple control messages, enabling automated data capture or label printing without complex network configuration. Where reliable point-to-point communication is required, this interface cable provides a technically straightforward solution that integrates with legacy and contemporary weighing equipment alike. Practical benefits that support uptime and workflow Lightweight construction and a focused specification minimise installation time and downtime during equipment setup or replacement. The cable’s specification suits regular workshop use and makes it easier to standardise interfaces across a fleet of scales. Purchasing via Metav Werkzeuge brings the additional assurance of curated product selection and centralised supply: Metav combines decades of precision expertise with extensive stockholding to support reliable deliveries to the shop floor. For procurement, the compact packing and predictable compatibility help keep logistics simple and maintenance predictable. Contact Metav Werkzeuge to arrange supply of the KERN RS-232 interface cable 572-926 and to discuss integration options for existing weighing systems Technical data Article number: 572-926 Manufacturer: KERN GTIN: 4045761245211 Country of origin: CN Tariff code: 84239010 Numbers / Core technical data Weight: 0.08 kg Cable length: 1.5 m SKU: 572-926 Special features RS-232 serial interface Accessory for scales (weighing systems) Category: Scales, accessories FAQ What type of interface does this cable provide? The cable provides an RS-232 serial interface suitable for point-to-point data transfer from scales to computers or printers. What is the cable length and how flexible is it for workshop use? The cable length is 1.5 m, offering practical reach for bench-top installations and tidy routing in workstations. Is this cable suitable for KERN weighing instruments? Yes, the cable is a KERN accessory (SKU 572-926) designed to connect with weighing equipment that features an RS-232 output. Can the cable be used for continuous data logging? The RS-232 connection supplied by this cable supports reliable numeric data transfer and is suitable for straightforward continuous logging setups. Manufacturer: KERN — Origin: China. Dealer and contact: Metav Werkzeuge, Emmerich am Rhein. Email: info@metav-werkzeuge.com, Phone: +49 2822 7131930

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271