12000 g Precision Calibrator Balance With 0.1 g Readability, 190×190 mm Stainless Steel Pan, LCD Display - KERN

For reliable, low-effort protection of sensitive scale controls, choose the lightweight KERN PNJ-A01S05 protective cover: supplied as a five-piece set and made to shield the keyboard and housing of the PNS.600-3 — order directly via Metav Werkzeuge or consult our specialists for fit and logistics. PNJ-A01S05 Protective Cover for PNS.600-3 — KERN, pack of 5 A PNJ-A01S05 protective cover designed for the KERN PNS.600-3, providing targeted protection for keyboard and housing in workshop and laboratory settings Protective cover for keyboard and housing Compatible with PNS.600-3 scales Supplied as a set of 5 Lightweight: approx. 0.02 kg each Reduce downtime with targeted component protection The protective cover is engineered to sit over the keyboard and housing, preventing ingress of dust and light contaminants that can cause wear or require frequent cleaning. Supplied as a pack of 5, the set supports routine replacement cycles and spare provisioning, which promotes continuity of operation. For workshop managers seeking measurable benefits, the accessory offers a straightforward way to lower maintenance intervals and preserve the functional integrity of weighing equipment without complex retrofitting. Practical supply and simple stock management for workshops Delivered in a multi-piece set, this accessory simplifies procurement for production floors and service teams. The five-piece configuration allows rotation between devices and ensures replacements are available when needed; this supports efficient inventory control and reduces ad hoc downtime. Availability through Metav Werkzeuge benefits from centralised logistics and a broad product range, enabling rapid restocking and consistent supply for scale accessory needs. Easy handling and clear compatibility for everyday use Compatibility with the PNS.600-3 scale series is specified, enabling immediate deployment on matching units. At approximately 0.02 kg per item, the cover is lightweight and easy to fit, so fitment requires minimal handling time and no special tools. The result is reliable protection with negligible impact on workflow, providing workshop staff with practical peace of mind and a simple method to protect sensitive control interfaces during routine operations. Secure a ready supply of KERN PNJ-A01S05 protective covers via Metav Werkzeuge for consistent workshop protection — enquiries and order details available at info@metav-werkzeuge.com or by phone on +49 2822 7131930 Technical data SKU: PNJ-A01S05 Manufacturer: KERN GTIN: 4045761185470 Country of origin: CN Core facts Weight: 0.02 kg Commodity code: 39269097 ECLASS: 24322502 Pack quantity: 5 pieces Special features Protection for keyboard and housing Compatible with PNS.600-3 scales Product category: Scales accessory — protective covers Category path: Waagen › Zubehör FAQ Is this cover compatible with the PNS.600-3 scale series? Yes. The PNJ-A01S05 protective cover is specified for use with the PNS.600-3 range and fits the keyboard and housing configuration of that model. How many covers are supplied in one set? The product is supplied as a set of five covers, allowing for immediate replacements and simple stock rotation. What protection does the cover provide? The cover protects the keyboard and housing from dust and light contamination, reducing the need for frequent cleaning and helping to maintain normal operation. What is the weight of each cover? Each PNJ-A01S05 protective cover weighs approximately 0.02 kg, making it easy to handle and fit during routine maintenance. Manufacturer: KERN — Country of origin: CN

Take advantage of fast, reliable printing together with plain‑paper archiving and an automatic cutter for streamlined weighing documentation; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. YKG-01 dot‑matrix printer by KERN — 4.7 lines/s, automatic cutter The YKG-01 is a compact dot‑matrix printer for retail, hospitality and kitchen environments, designed to print weighing results on plain paper for reliable, long‑term archiving. Fast dot‑matrix print at 4.7 lines/s Prints weighing values on plain paper Built‑in automatic paper cutter Interchangeable interface, cable not included Dependable output for retail and catering operations The unit delivers consistent impact printing that is optimised for the frequent, short receipts typical in shops and kitchens. With a rated speed of 4.7 lines/s and a maximum of 42 characters per line, the mechanism ensures legible, evenly spaced output that suits both immediate transaction needs and longer‑term record keeping. Using plain paper instead of thermal rolls reduces running costs and enables simple archival procedures, while the printer’s robust construction resists the knocks and humidity common in catering environments. Simple integration and low‑effort maintenance Engineered for straightforward connection in point‑of‑sale setups, the model provides an interchangeable interface to match existing systems; note that the interface cable is not included. The supplied EU power adapter supports 230 V AC, 50 Hz supplies, and the plug‑in power design keeps replacement simple. Routine consumable changes are fast: the design allows easy paper and ribbon replacement without specialised tools, reducing downtime and keeping staff focused on service rather than maintenance. Archive‑ready receipts and controlled operating range Because the printer produces records on plain paper, documents withstand longer storage and are compatible with conventional filing systems. The integrated automatic paper cutter gives a clean finish to each slip, improving handling and reducing errors when collecting multiple receipts. For reliable use, the device is specified for operation between 5 °C and 35 °C, and its compact footprint suits busy counters and compact kitchen stations, contributing to an orderly, compliant documentation workflow. Contact Metav Werkzeuge for an expert recommendation on integrating the KERN YKG‑01 into the workflow and to arrange supply directly from our Emmerich warehouse – eMail info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: YKG SKU: YKG-01 Manufacturer: KERN Origin: JP GTIN: 4045761253056 Facts Dimensions: 160 x 248 x 139 mm Weight: 2.71 kg Print speed: 4.7 lines/s Max characters per line: 42 Power input: 230 V AC, 50 Hz Paper widths: 58, 70, 76 mm Operating temperature: 5 °C–35 °C Special features Printing method: impact (dot‑matrix) Power supply: EURO plug‑in adapter Built‑in automatic paper cutter Interchangeable interface (cable not included) Designed for plain‑paper receipt archiving FAQ How does the YKG‑01 handle receipt archiving? The KERN YKG‑01 prints on plain paper, producing durable receipts suitable for standard filing and longer retention periods. Is an interface cable included with the printer? No, the printer is supplied with an interchangeable interface but the interface cable is not included and must be provided separately. What power supply is required for the unit? The unit uses a 230 V AC, 50 Hz supply and is shipped with a EURO plug‑in adapter. Can the printer be used in a kitchen environment? Yes, the design and impact printing method make it suitable for retail and catering settings; operating conditions should remain within 5 °C–35 °C. What makes this model suitable for point‑of‑sale systems? Its compact size, fast 4.7 lines/s output, automatic paper cutter and interchangeable interface facilitate simple integration into POS workflows. Metav Werkzeuge — Emmerich (warehouse and quality hub); Contact: info@metav-werkzeuge.com; Tel: +49 2822 7131930; WhatsApp: +49 170 2837271

Take advantage of reliable RS-232 data transfer and a 1.5 m cable length to integrate measurement equipment smoothly into existing workflows. Order the cable directly via Metav Werkzeuge from the Emmerich warehouse or request tailored advice from our consultants. MLB-A05 Interface Cable — RS-232 connection, 1.5 m (KERN) The MLB-A05 Interface Cable is a dedicated RS-232 connection lead for weighing instruments and laboratory balances, engineered to provide steady data transmission between measurement devices and external systems. RS-232 serial interface 1.5 m cable length Compatible with KERN balances Robust connector design Ensure accurate data logging with stable RS-232 transfer The RS-232 interface offers a proven, industry-standard method for serial data exchange, making this cable well suited to industrial metrology and laboratory environments where measurement integrity matters. By providing reliable data transfer, the cable reduces the risk of communication errors during recording and logging tasks, which in turn supports traceability and process consistency. The design supports routine integration into existing measurement setups without requiring changes to software or instrument firmware. Easy integration and clear compatibility for weighing systems With a 1.5 m lead, connection flexibility between bench instruments and nearby data terminals is increased while keeping cable routing tidy in workshop or lab setups. The cable is specified for use with RS-232-equipped devices commonly found on balances and related instruments, ensuring broad compatibility across models. Installation is straightforward: the interface lead serves as a direct conduit for serial signals, simplifying set-up procedures and reducing the need for adapters or converters in typical measurement environments. Built for dependable workshop and laboratory use The cable’s construction balances a robust connector with low weight, enabling frequent handling and routine use at weighing stations without imposing undue strain on instrument ports. The modest mass supports neat cable management and minimises mechanical load on connectors during daily operation. Sourced under the KERN product line, the accessory is intended to complement precision equipment with components that preserve uptime and support consistent measurement workflows. For reliable serial connectivity choose the KERN MLB-A05 interface cable—contact Metav Werkzeuge in Emmerich for specialist guidance or to order directly from our stock. Technical data Article number: MLB-A05 Manufacturer: KERN SKU: MLB-A05 GTIN: 4045761245204 Core data Cable length: 1.5 m Weight: 0.08 kg ECLASS: 19050112 Tariff code: 84239010 Special features Interface: RS-232 Category: Accessories for scales Origin: China FAQ What interface does this cable use? The MLB-A05 interface cable uses the RS-232 serial interface for data transfer between balances and external devices. Is the cable compatible with KERN scales? Yes, the lead is specified for compatibility with KERN weighing instruments and other devices that provide an RS-232 port. How long is the cable and how heavy is it? The cable measures 1.5 m in length and has a weight of 0.08 kg, suitable for bench-top and near-equipment routing. Can this cable be used for data logging to a PC or printer? The MLB-A05 is designed for RS-232 connections and can be used to link RS-232-capable instruments to serial printers or data acquisition systems that accept serial input. Metav Werkzeuge, Emmerich am Rhein, info@metav-werkzeuge.com, +49 2822 7131930

Take advantage of precise measurement results through robust vibration damping and a heavy, polished granite surface that stabilises sensitive instruments; compact dimensions and hygienic surfaces support ergonomic use in space-constrained labs. Order the antivibration plate directly via Metav Werkzeuge or contact our consultants for tailored advice and fast dispatch. KERN YPS-05 Antivibration Plate — Polished granite, 565×450×60 mm The KERN YPS-05 is an antivibration plate designed to isolate analytical balances and microscopes from vibrations, providing a stable working surface for high-precision measurements Polished granite on resilient rubber supports Suitable for analytical balances and microscopes Compact footprint 565×450×60 mm Hygiene-friendly, easy-to-clean surfaces Reduce measurement errors with a stable work surface High-precision weighing and optical inspection require a stable base to prevent fluctuating results. The KERN YPS-05 combines mass and material to provide effective vibration damping: the dense polished granite top increases inertia, while the support system attenuates external shocks. This construction reduces measurement scatter and the need for repeat tests, which improves throughput and ensures repeatable results for both routine and traceable analytical tasks. The described behaviour of the platform is particularly relevant when using analytical balances, where even small vibrations can affect the displayed value. Compact footprint that supports ergonomic workflows A small laboratory bench or a crowded workshop does not need to compromise on measurement quality. With overall dimensions of 565×450×60 mm, the plate fits tight workspaces while allowing ergonomic operation either standing or seated. The top surface is finished for cleanliness: hygienic surfaces are easy to wipe down and maintain, supporting contamination control in sensitive environments. The low-profile design enables comfortable access to instruments and ancillary equipment and is tailored to accommodate KERN precision instruments and microscopes with corresponding base sizes. Robust build and ready logistics for uninterrupted operation Durability is central to a long service life and consistent performance. The YPS-05 rests on absorbing rubber elements that decouple the granite slab from bench vibrations and protect the platform from transmitted shocks. This arrangement creates a dependable working surface that preserves instrument calibration and extends operational uptime. For operational planning, the unit is shipping ready in 2 days and delivered palletised, reducing lead times and simplifying installation. The combination of a heavy top and resilient supports yields a stable base that lowers the frequency of adjustments and supports efficient lab routines. For reliable vibration control choose the KERN YPS-05 and contact Metav Werkzeuge in Emmerich for expert advice and prompt palletised dispatch Technical Data Article number: YPS-05 SKU: YPS-05 Manufacturer: KERN GTIN: 4045761253568 Dimensions: 565×450×60 mm Material: Polished granite Origin: DE Commodity code: 84239010 ECLASS: 21170605 Facts Dimensions: 565×450×60 mm Net weight: approx. 42 kg Shipping: ready in 2 days Commodity code: 84239010 ECLASS: 21170605 Special features Material: polished granite Mounted on absorbing rubber elements Hygienic, easy-to-clean surfaces Ergonomic use standing or sitting Suitable for KERN analytical and precision balances and microscopes with corresponding dimensions Shipping: palletised FAQ Is the antivibration plate compatible with analytical balances? The KERN YPS-05 antivibration plate is designed for use with KERN analytical balances and precision scales that fit the platform dimensions; it reduces external vibrations and stabilises weighing results. What are the exact dimensions and weight of the plate? The platform measures 565×450×60 mm and has a net weight of approximately 42 kg, giving sufficient mass for effective vibration isolation. Can the plate be used for microscopes and optical inspection? Yes, the antivibration plate is suitable for microscopes and other optical instruments, providing a vibration-reduced surface for clearer imaging and more consistent observations. How should the polished granite surface be cleaned and maintained? Polished granite on the antivibration plate is easy to maintain; clean with a mild detergent and soft cloth, avoid harsh abrasives, and check the rubber supports periodically for secure seating. Manufacturer: KERN; Dealer: Metav Werkzeuge, Emmerich am Rhein; Email: info@metav-werkzeuge.com; Phone: +49 2822 7131930; WhatsApp: +49 170 2837271