RCMT 10T3M0 KCU10 Indexable Insert - Kennametal

Turning Holder (Klemmhalter) — SRGC for RCMT Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is a left-hand toolholder optimised for RCMT 10T3 indexable inserts, designed for stable clamping and reliable turning operations in metalworking workshops. Turning Holder SRGCL 2525 for RCMT 10T3 inserts 150 mm Overall length for compact setups 25 × 25 mm Shank for secure fixture 30° Cutting Angle for consistent geometry Left‑hand Cutting Direction for dedicated turning tasks Secure clamping that stabilises your machining The SRGCL 2525 design provides a compact footprint with a 25 × 25 mm shank and a 32 mm cutting-head width, which together enable firm seating of RCMT 10T3 inserts. This firm clamping reduces vibration and contributes to a more consistent Surface Finish on turned parts, making setup more predictable for everyday workshop turning. For users new to indexable tooling, a stable holder means fewer re‑adjustments and more repeatable results. Defined 30° geometry for reliable chip control A 30° Cutting Angle combined with a left‑hand Cutting Direction offers predictable cutting engagement and chip flow for operations that require that orientation. The specified geometry helps maintain cutting forces within expected ranges, which supports tool life and dimensional stability of workpieces. For customers unfamiliar with cutting-angle terminology: the angle describes the insert seating and approach to the workpiece and directly affects chip formation and surface quality. Compact length and balanced mass for practical use With an Overall Length of 150 mm and a weight of 0.72 kg, the holder balances reach and rigidity for general turning tasks. The moderate length keeps the tool close to the machine spindle, improving stiffness compared with overly long setups. The ISO designation SRGCL 2525 indicates a standardised shank profile and mounting geometry, which simplifies integration into common tool posts and quick‑change systems. Who benefits from this holder and typical applications Operators and workshops that use RCMT 10T3 indexable inserts for turning will find this holder particularly suitable for left‑hand turning operations where a compact, standardised clamping solution is required. The configuration supports medium‑duty turning, finishing passes, and applications where consistent insert positioning is essential. For teams seeking compatibility and straightforward tool management, the SRGCL form factor streamlines inventory and setup. Strongly consider the Teknik Makina Turning Holder for stable, repeatable left‑hand turning — for personalised technical advice and purchasing assistance contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications for reliable setup Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: D292TM Compatible Indexable Inserts: RCMT 10T3 Overall Length: 150 mm Weight: 0.72 kg ISO Designation: SRGCL 2525 Secondary Designation: M10 Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Angle: 30° Cutting Direction: left GTIN: 4061905154225 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and what does that mean in practice? The Turning Holder (Klemmhalter) by Teknik Makina is designed for RCMT 10T3 indexable inserts; this means you can use commonly available RCMT 10T3 grades for a range of finishing and light‑to‑medium turning operations with predictable insert seating and straightforward replacement. Is the SRGCL 2525 compatible with my tool post and how to check? The SRGCL 2525 designation indicates a standardised shank profile; check that your tool post accepts a 25 × 25 mm holder. If uncertain, METAV Werkzeuge can advise whether the Teknik Makina Turning Holder matches your machine interfaces and recommend any adapters. What does the 30° Cutting Angle and left‑hand direction imply for machining choices? A 30° Cutting Angle in this Teknik Makina holder positions RCMT 10T3 inserts for controlled chip breakage and surface quality; choose left‑hand turning setups or arrange workholding so that the tool approaches the workpiece in the left‑hand orientation specified. Can METAV Werkzeuge help with technical questions before buying the Turning Holder? Yes. METAV Werkzeuge offers detailed consultation for tooling choices, setup recommendations and compatibility checks for the Turning Holder by Teknik Makina — contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert support. 150mm SRGCL 2525 Turning Holder for RCMT 10T3, 30° Cut, Left — Teknik Makina

Turning Holder SRGCR 2525 for RCMT 10T3 by Teknik Makina The Turning Holder SRGCR 2525 is a precision clamping tool designed for secure mounting of RCMT 10T3 indexable inserts, providing stable support for right-hand turning operations in professional workshops and production environments. Turning Holder SRGCR 2525 for RCMT 10T3 inserts 150 mm overall length for extended reach 30° cutting angle for controlled chip flow Right-hand cutting direction for standard lathes Robust 25 × 25 mm shank for stable clamping Engineered for Stability and Consistent Tool Life The Turning Holder is built around the ISO designation SRGCR 2525, featuring a 25 × 25 mm shank that delivers reliable rigidity during heavy cuts. This stability reduces chatter and wear on both the Insert and the toolholder, which translates into longer tool life and fewer interruptions on the shop floor. The clamping geometry secures RCMT 10T3 inserts precisely, ensuring repeatable set-up and predictable machining results. Optimised Cutting Geometry for Predictable Chip Control Thanks to the 30° cutting angle and the Right-hand cutting configuration, the holder channels chips effectively and supports smooth engagement with the workpiece. When fitted with RCMT 10T3 inserts, this geometry helps maintain surface finish consistency and reduces the risk of built-up edge on difficult materials. For operators, that means fewer reworks and a steadier production rhythm under varying cutting conditions. Versatility for Turning Tasks with Extended Reach With an overall length of 150 mm and a cutting-head width of 32 mm, the holder is suited for a wide range of turning applications where reach and access matter. Compatibility with standard RCMT 10T3 indexable inserts makes tooling changes straightforward and cost-effective. The combination of reach and insert compatibility supports both roughing and finishing passes on lathes commonly found in job shops and maintenance departments. Tailored for Professionals and Demanding Workflows This clamping solution addresses the needs of machinists, maintenance technicians and production engineers who require dependable toolholding under continuous use. The Turning Holder is designed to be easy to set up and clamp, helping reduce setup time and increasing Net Machining Time. For teams running mixed batches or high-mix production, the holder provides the balance between rigidity and accessibility necessary to keep cycles efficient. Clear Specifications and Practical Design Details The holder’s secondary designation M10 and its precise dimensions (Width 25 mm, Height 25 mm) make it simple to verify fitment with turret stations and toolposts. The standardized interface and the evident machining tolerances allow quick inspection and replacement planning. Availability marked as in Stock ensures procurement is straightforward for scheduled maintenance or rapid tooling changes. For precise, reliable turning operations choose the Teknik Makina Turning Holder SRGCR 2525 and contact METAV Werkzeuge for expert consultation at info@metav-werkzeuge.com or by phone at +49 2822 7131930 — assistance is also available via WhatsApp at +49 170 2837271 Designation: Turning Holder Brand: Teknik Makina SKU: D286TM Compatible Inserts: RCMT 10T3 Overall Length: 150 mm ISO Designation: SRGCR 2525 Secondary Designation: M10 Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Angle: 30° Cutting Direction: Right Weight: 0.72 kg GTIN: 4061905154164 Availability: in Stock Condition: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts does the Turning Holder from Teknik Makina accept? The Turning Holder by Teknik Makina is designed to accept RCMT 10T3 indexable inserts, making it compatible with commonly used carbide grades for both finishing and roughing operations. Is the SRGCR 2525 holder suitable for production turning? Yes, the SRGCR 2525 Turning Holder from Teknik Makina provides a robust 25 × 25 mm shank and 150 mm reach, features that support stable performance in production environments with frequent cycles. Can METAV Werkzeuge help determine if this Turning Holder fits my machine? If you are unsure whether the Teknik Makina Turning Holder SRGCR 2525 meets your requirements, METAV Werkzeuge offers expert advice—contact info@metav-werkzeuge.com or call +49 2822 7131930 for personalised support. What is the cutting direction of this holder and why does it matter? The holder is configured for right-hand cutting; this determines the orientation of chip flow and is essential to match the holder to the lathe’s setup and the intended machining strategy. Does the SRGCR 2525 require special clamps or mounting hardware? The SRGCR 2525 Turning Holder uses standard clamping for RCMT 10T3 inserts and the common M10 secondary designation for secure fastening; METAV Werkzeuge can advise on any additional mounting accessories if needed. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D286TM","sku":"D286TM","mpn":"D286TM","gtin13":"4061905154164","name":"150mm SRGCR 2525 30° Turning Holder for RCMT 10T3","description":"SRGCR 2525 turning holder for RCMT 10T3 indexable inserts; 150 mm overall length; 25 mm width; 25 mm height; 32 mm cutting head width; 30° cutting angle; right-hand; weight 0.72 kg; Teknik Makina.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/eb/0d/35/64/64350debe473c717e8f09967/d280tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cc/7e/de/62/62de7ecc33927e49dbf32776/d280tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/27/7e/de/62/62de7e2733927e49dbf3272a/d280tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"ISO designation","value":"SRGCR 2525"},{"@type":"PropertyValue","name":"For indexable inserts","value":"RCMT 10T3"},{"@type":"PropertyValue","name":"Overall length","value":"150 mm"},{"@type":"PropertyValue","name":"Width","value":"25 mm"},{"@type":"PropertyValue","name":"Height","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"32 mm"},{"@type":"PropertyValue","name":"Cutting angle","value":"30°"},{"@type":"PropertyValue","name":"Direction","value":"right"},{"@type":"PropertyValue","name":"Weight","value":"0.72 kg"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What inserts fit this holder?","acceptedAnswer":{"@type":"Answer","text":"This holder is designed for RCMT 10T3 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"The overall length is 150 mm."}},{"@type":"Question","name":"What are the holder dimensions?","acceptedAnswer":{"@type":"Answer","text":"Width 25 mm, height 25 mm, cutting head width 32 mm."}},{"@type":"Question","name":"What is the cutting angle and direction?","acceptedAnswer":{"@type":"Answer","text":"Cutting angle 30° and right-hand cutting direction."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/150mm-srgcr-2525-30-turning-holder-rcmt-10t3","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"SRGC for RCMT Indexable Inserts"},{"@type":"Thing","name":"Turning Holder SRGCR 2525"},{"@type":"Thing","name":"Teknik Makina Tooling"}],"mentions":[{"@type":"Thing","name":"RCMT 10T3 Inserts"},{"@type":"Thing","name":"SRGCR 2525 ISO Designation"},{"@type":"Thing","name":"150 mm Overall Length"}]}]}

Turning Holder SRGC for RCMT Indexable Inserts by Teknik Makina The Turning Holder is a left‑hand clamping tool designed for precision turning with RCMT 10T3 indexable inserts, suitable for professional metalworking and CNC finishing applications. Precision fit for RCMT 10T3 Inserts 125 mm Overall Length for sturdy reach 30° Cutting Angle for stable cutting SRGCL 2020 ISO design for reliable clamping Maximum Cutting Precision with RCMT 10T3 Compatibility The Turning Holder is engineered to accept RCMT 10T3 indexable inserts, delivering repeatable seating and alignment for consistent cutting performance. Compatibility with these common inserts reduces setup time and simplifies tool inventory, while the left‑hand configuration supports specific turning operations where reverse cutting direction is required. This targeted design helps achieve tighter tolerances and predictable surface finishes during medium to heavy turning tasks. Rigidity and Stability from Purposeful Dimensions With an overall length of 125 mm and a robust cross section of 20 mm width and 20 mm height, the holder provides the rigidity needed to resist vibration and deflection. The 25 mm cutting‑head width and 25 mm cutting height increase support at the cutting zone, which improves tool life and surface quality. These dimensions translate into more stable chip formation and fewer reworks, especially on longer reach operations where rigidity directly impacts accuracy. Professional Design Principles for Workshop and CNC Use Built to the SRGCL 2020 ISO designation, this clamping system emphasizes easy mounting, secure insert retention and repeatable indexability. The 30° cutting angle contributes to controlled chip flow and reduced cutting forces, making the holder suitable for a wide range of steels and cast materials. The straightforward geometry and standard interface mean integration into existing tool setups is seamless, enabling machinists and production shops to maintain throughput without complex reengineering. Practical Integration and Local Support for Technical Decisions Installation requires only standard toolpost or turret mounting practices; the holder’s established interface supports quick changeovers and minimizes downtime. When precision or material characteristics raise questions, METAV Werkzeuge offers competent, hands‑on consultation to verify fitment and application parameters. Assistance is available for selecting the correct insert grade, coolant strategy or clamping torque to optimize performance in specific machining tasks. Choose the Teknik Makina Turning Holder for reliable clamping and consistent turning results — METAV Werkzeuge provides personalised technical advice and support at info@metav-werkzeuge.com or by phone at +49 2822 7131930 Bezeichnung: Turning Holder Marke: Teknik Makina SKU: D283TM Für Wendeschneidplatten: RCMT 10T3 ISO Bezeichnung: SRGCL 2020 Gesamtlänge: 125 mm Breite: 20 mm Höhe: 20 mm Schneidenkopf Breite: 25 mm Schneidenhöhe: 25 mm Schnittwinkel: 30° Schnittrichtung: left Gewicht: 0.41 kg GTIN: 4061905154218 ECLASS: 21181004 Verfügbarkeit: in Stock Zustand: new Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and which operations suit it best? The Turning Holder from Teknik Makina is designed for RCMT 10T3 indexable inserts and is particularly suitable for left‑hand turning operations, medium to heavy cutting and finishing passes where stability and repeatable seating are required. Does the Teknik Makina Turning Holder require special mounting or a specific turret interface? No special interface is needed; the Turning Holder follows standard mounting practice for SRGCL‑type holders. METAV Werkzeuge can advise on turret adapters or clamping torque to ensure correct installation and optimal cutting performance. How does the 30° cutting angle affect performance with the Teknik Makina Turning Holder? The 30° cutting angle integrated into the Turning Holder geometry lowers cutting forces and improves chip control, which benefits surface finish and insert life when machining steels and similar materials. Who can I contact for technical questions about the Teknik Makina Turning Holder before purchasing? For detailed application support, contact METAV Werkzeuge for expertise on insert selection, cutting data and compatibility at info@metav-werkzeuge.com or call +49 2822 7131930; WhatsApp is also available at +49 170 2837271. {"@context":"https://schema.org","@graph":[{"@type":"Product","@id":"#D283TM","sku":"D283TM","mpn":"SRGCL 2020","gtin13":"4061905154218","name":"125mm Turning Holder SRGC for RCMT 10T3, 30° Cutting Angle, Left - Teknik Makina","description":"SRGC turning holder for RCMT 10T3 indexable inserts; 125 mm overall length, 30° cutting angle, left-hand, robust clamp design.","image":["https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/62/0d/35/64/64350d624fcfb37a48907473/d293tm-main.png","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/cc/7e/de/62/62de7ecc33927e49dbf32775/d293tm-technische-zeichnung.jpg","https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/27/7e/de/62/62de7e27bd24461b3d5f7a10/d293tm-artikelliste.jpg"],"additionalProperty":[{"@type":"PropertyValue","name":"For indexable inserts","value":"RCMT 10T3"},{"@type":"PropertyValue","name":"Overall length","value":"125 mm"},{"@type":"PropertyValue","name":"Cutting angle","value":"30°"},{"@type":"PropertyValue","name":"Direction","value":"Left"},{"@type":"PropertyValue","name":"ISO designation","value":"SRGCL 2020"},{"@type":"PropertyValue","name":"Width","value":"20 mm"},{"@type":"PropertyValue","name":"Height","value":"20 mm"},{"@type":"PropertyValue","name":"Cutting head width","value":"25 mm"},{"@type":"PropertyValue","name":"Cutting height","value":"25 mm"},{"@type":"PropertyValue","name":"Weight","value":"0.41 kg"},{"@type":"PropertyValue","name":"Manufacturer","value":"Teknik Makina"},{"@type":"PropertyValue","name":"Bezeichnung 2","value":"K10"}]},{"@type":"FAQPage","mainEntity":[{"@type":"Question","name":"What insert type does this holder accept?","acceptedAnswer":{"@type":"Answer","text":"The holder accepts RCMT 10T3 indexable inserts."}},{"@type":"Question","name":"What is the overall length?","acceptedAnswer":{"@type":"Answer","text":"Overall length is 125 mm."}},{"@type":"Question","name":"What is the cutting angle?","acceptedAnswer":{"@type":"Answer","text":"The cutting angle is 30°."}},{"@type":"Question","name":"Is this holder left or right hand?","acceptedAnswer":{"@type":"Answer","text":"This is a left-hand turning holder."}},{"@type":"Question","name":"What is the ISO designation?","acceptedAnswer":{"@type":"Answer","text":"ISO designation SRGCL 2020."}},{"@type":"Question","name":"Who is the manufacturer?","acceptedAnswer":{"@type":"Answer","text":"Manufacturer is Teknik Makina."}}]},{"@type":"ItemPage","url":"https://metav-shop.de/","dateModified":"2026-04-16T12:00:00+01:00","author":{"@type":"Person","name":"Stephan Bayer","url":"https://www.linkedin.com/in/stephan-bayer/"},"publisher":{"@type":"Organization","name":"Metav Werkzeuge GmbH","url":"https://metav-shop.de","logo":{"@type":"ImageObject","url":"https://files.plytix.com/api/v1.1/file/public_files/pim/assets/57/c3/98/62/6298c3575d155f1bc7e497fd/images/8e/48/c5/69/69c5488eb2b3400ba580741c/logo-metav-1200-675.png","width":1200,"height":675},"address":{"@type":"PostalAddress","streetAddress":"Parkring 45","postalCode":"46446","addressLocality":"Emmerich","addressCountry":"DE"},"telephone":"+49 2822 7131930","email":"info@metav-werkzeuge.com"},"about":[{"@type":"Thing","name":"SRGC Turning Holders"},{"@type":"Thing","name":"Indexable Insert Tooling"},{"@type":"Thing","name":"Turning Applications"}],"mentions":[{"@type":"Thing","name":"RCMT 10T3 Inserts"},{"@type":"Thing","name":"SRGCL 2020 ISO Designation"},{"@type":"Thing","name":"Teknik Makina Manufacturer"}]}]}

Introducing Turning Holder (SRGC for RCMT Indexable Inserts) by Teknik Makina The Turning Holder (SRGC for RCMT Indexable Inserts) is a precision clamp holder designed for reliable right-hand turning with RCMT 10T3 indexable inserts. SRGCR 2020 design for RCMT 10T3 inserts 125 mm Overall length for secure reach 20 mm Shank width and height for stability 25 mm Cutting head width for versatile use 30° Cutting angle for precise right-hand cuts Precise Clamping for Consistent Machining Results The Turning Holder from Teknik Makina delivers consistent clamping force and repeatable positioning to improve machining accuracy. Thanks to the SRGCR 2020 geometry, the insert seats with minimal play, which reduces chatter and surface irregularities. This results in more predictable tool life and fewer reworks, making the holder especially valuable for production environments where cycle-to-cycle consistency is critical. Built for Compatibility and Simple Handling Engineered specifically for RCMT 10T3 indexable inserts, this clamp holder simplifies tool setup and changeover. The clearly defined insert pocket and the included secondary designation K10 facilitate quick mounting and secure fixation, reducing downtime during insert replacement. Operators benefit from straightforward handling and the ability to maintain cutting parameters with confidence. Designed for Professional Turning Applications With a 125 mm overall length and a compact shank of 20 mm width and height, the toolholder balances reach and rigidity to suit a broad range of turning tasks. The 25 mm cutting head width provides compatibility with common insert sizes, while the 30° geometry supports stable right-hand cutting. This combination makes the holder suitable for workshop and light industrial use where stability and accessibility are required. Durable Construction and Practical Advantages Manufactured to deliver dependable performance, the holder's dimensions and machining tolerances focus on long-term reliability. The 30° cutting angle and robust clamping mechanism contribute to reduced insert wear under typical turning loads. Routine maintenance is straightforward: regular inspection of the clamping screw and cleaning of the insert seat keep the holder operating at peak performance with minimal effort. Secure enhanced turning performance with Teknik Makina's Turning Holder — contact METAV Werkzeuge for expert advice, technical clarification or ordering assistance at info@metav-werkzeuge.com, Tel +49 2822 7131930, WhatsApp +49 170 2837271 Turning Holder Brand: Teknik Makina SKU: D284TM For Indexable Inserts: RCMT 10T3 Overall Length: 125 mm Weight: 0.41 kg ISO Designation: SRGCR 2020 Secondary Designation: K10 Shank Width: 20 mm Shank Height: 20 mm Cutting Head Width: 25 mm Cutting Angle: 30° Cutting Direction: right GTIN: 4061905154157 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Turkey, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit this Turning Holder from Teknik Makina? The Turning Holder from Teknik Makina is designed specifically for RCMT 10T3 indexable inserts, ensuring correct seating and reliable clamping for those insert geometries. Is the SRGCR 2020 holder suitable for production use? Yes, the SRGCR 2020 Turning Holder by Teknik Makina offers the rigidity and repeatability demanded in production environments, thanks to its precise manufacturing and secure clamp design. How do I maintain the Turning Holder to extend service life? Regularly clean the insert seat and check the clamping screw; Teknik Makina's Turning Holder benefits from simple inspections and occasional torque verification to sustain optimal performance. Can METAV Werkzeuge provide technical support for this Turning Holder? Absolutely — METAV Werkzeuge offers comprehensive advice for the Turning Holder by Teknik Makina; contact info@metav-werkzeuge.com or call +49 2822 7131930 for tailored assistance. 125mm SRGCR 2020 Turning Holder for RCMT 10T3, 30° Cutting Angle, Right-Hand - Teknik Makina