RCMT 10T3MO Indexable Insert for Stainless Steel - MetavCUT

Take advantage of a robust combination of precise clamping, proven ISO compatibility and a compact 150 mm reach for stable right‑hand turning operations; order this holder directly via Metav Werkzeuge or consult our specialists for tailored tooling advice. SRGC Clamping Holder — SRGCR 2525 for RCMT 10T3, right‑hand (Teknik Cutting Tools) The SRGC for RCMT Indexable Inserts is a right‑hand clamping holder engineered for conventional turning tasks with RCMT 10T3 inserts, offering a compact 150 mm reach and secure M10 mounting for consistent setup. Right‑hand holder for RCMT 10T3 inserts ISO SRGCR 2525 designation for compatibility 150 mm overall length for stable reach Robust clamping with 30° cutting angle Precision compatibility that reduces setup time The SRGC clamping system is designed around ISO SRGCR 2525 compatibility, making it immediately suitable for RCMT 10T3 indexable inserts. This standardised interface simplifies tooling selection and stock management in the workshop: a single holder type covers a wide range of turning tasks when matched with the appropriate insert geometry. The combination of a compact 150 mm overall length and a moderate mass (approx. 0.72 kg) delivers a stable platform that reduces vibration and shortens adjustment cycles, which in turn decreases non‑productive time on the lathe. Stable cutting geometry for consistent surface quality A defined 30° cutting angle and a 30 mm cutting height are the core of the holder’s cutting geometry: these dimensions promote reliable chip evacuation and predictable insert engagement. The 32 mm cutting‑head width and 25 mm body width ensure a balanced stiffness-to-clearance ratio, so the clamping mechanism maintains repeatable cutter position under varying loads. The integrated M10 fixing provides secure attachment to standard toolposts, supporting consistent cutting forces and helping to extend the life of both the insert and the toolholder through reduced micro‑movement. Workshop benefits: fewer tool changes, more uptime Designed for routine and small‑batch production environments, this indexable insert holder brings operational benefits beyond raw dimensions. Clear standardisation (ISO designation) and compatibility with RCMT‑type inserts simplify replenishment and stock control, while the right‑hand orientation suits the majority of conventional turning setups. For procurement and maintenance teams the result is a reliable, easy‑to‑manage component that lowers the risk of incorrect fits and reduces downtime. Technical buyers will appreciate the pragmatic balance of reach, clamping security and compatibility that supports consistent part quality across shift patterns. Choose the Teknik Cutting Tools SRGC holder for dependable right‑hand turning and contact Metav Werkzeuge in Emmerich for personalised guidance and rapid supply from a trusted European quality partner Technical Data Article number: D286TM Manufacturer: Teknik Makina Product: SRGC clamping holder for RCMT indexable inserts ISO designation: SRGCR 2525 eClass: 21181004 Facts Overall length: 150 mm Weight: 0.72 kg Holder height: 25 mm Cutting head width: 32 mm Body width: 25 mm Cutting height: 30 mm Special features Compatible inserts: RCMT 10T3 Cutting direction: Right Cutting angle: 30° Shank bore / thread: M10 Suitable for indexable insert turning applications FAQ Which indexable inserts fit this holder? The holder accepts RCMT 10T3 indexable inserts; compatibility is ensured by the ISO SRGCR 2525 interface specified for this Teknik Cutting Tools clamping holder (SKU D286TM). Is this holder suitable for left‑hand turning? This model is configured for right‑hand turning; for left‑hand operations a corresponding left‑hand toolholder should be selected. What are the key dimensions to check before ordering? Important dimensions include the 150 mm overall length, 30 mm cutting height and 32 mm cutting‑head width; these values determine reach and clearance for the intended turning task. How is the holder mounted to the toolpost? Mounting is achieved via the M10 shank bore and standard clamping interfaces; the M10 fixing helps to secure the holder and maintain repeatable cutter position during cutting. Will this holder improve insert life? The combination of a stable body, defined 30° cutting angle and secure clamping tends to reduce micro‑movement and vibration, which can contribute to more consistent tool wear and extended insert life when applied correctly. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Turning Holder (Klemmhalter) — SRGC for RCMT Indexable Inserts by Teknik Makina The Turning Holder (Klemmhalter) is a left-hand toolholder optimised for RCMT 10T3 indexable inserts, designed for stable clamping and reliable turning operations in metalworking workshops. Turning Holder SRGCL 2525 for RCMT 10T3 inserts 150 mm Overall length for compact setups 25 × 25 mm Shank for secure fixture 30° Cutting Angle for consistent geometry Left‑hand Cutting Direction for dedicated turning tasks Secure clamping that stabilises your machining The SRGCL 2525 design provides a compact footprint with a 25 × 25 mm shank and a 32 mm cutting-head width, which together enable firm seating of RCMT 10T3 inserts. This firm clamping reduces vibration and contributes to a more consistent Surface Finish on turned parts, making setup more predictable for everyday workshop turning. For users new to indexable tooling, a stable holder means fewer re‑adjustments and more repeatable results. Defined 30° geometry for reliable chip control A 30° Cutting Angle combined with a left‑hand Cutting Direction offers predictable cutting engagement and chip flow for operations that require that orientation. The specified geometry helps maintain cutting forces within expected ranges, which supports tool life and dimensional stability of workpieces. For customers unfamiliar with cutting-angle terminology: the angle describes the insert seating and approach to the workpiece and directly affects chip formation and surface quality. Compact length and balanced mass for practical use With an Overall Length of 150 mm and a weight of 0.72 kg, the holder balances reach and rigidity for general turning tasks. The moderate length keeps the tool close to the machine spindle, improving stiffness compared with overly long setups. The ISO designation SRGCL 2525 indicates a standardised shank profile and mounting geometry, which simplifies integration into common tool posts and quick‑change systems. Who benefits from this holder and typical applications Operators and workshops that use RCMT 10T3 indexable inserts for turning will find this holder particularly suitable for left‑hand turning operations where a compact, standardised clamping solution is required. The configuration supports medium‑duty turning, finishing passes, and applications where consistent insert positioning is essential. For teams seeking compatibility and straightforward tool management, the SRGCL form factor streamlines inventory and setup. Strongly consider the Teknik Makina Turning Holder for stable, repeatable left‑hand turning — for personalised technical advice and purchasing assistance contact METAV Werkzeuge at info@metav-werkzeuge.com, +49 2822 7131930 or WhatsApp +49 170 2837271 Technical Specifications for reliable setup Bezeichnung: Turning Holder (Klemmhalter) Marke: Teknik Makina SKU: D292TM Compatible Indexable Inserts: RCMT 10T3 Overall Length: 150 mm Weight: 0.72 kg ISO Designation: SRGCL 2525 Secondary Designation: M10 Shank Width: 25 mm Shank Height: 25 mm Cutting Head Width: 32 mm Cutting Angle: 30° Cutting Direction: left GTIN: 4061905154225 Manufacturer: Teknik Makina, Nolu Sokak, No 9, Selcuklu, Türkei, eMail: info@teknik-makina.com Responsible Person: Metav Werkzeuge GmbH, Parkring 45, 46446 Emmerich, eMail: info@metav-werkzeuge.com FAQ What inserts fit the Turning Holder from Teknik Makina and what does that mean in practice? The Turning Holder (Klemmhalter) by Teknik Makina is designed for RCMT 10T3 indexable inserts; this means you can use commonly available RCMT 10T3 grades for a range of finishing and light‑to‑medium turning operations with predictable insert seating and straightforward replacement. Is the SRGCL 2525 compatible with my tool post and how to check? The SRGCL 2525 designation indicates a standardised shank profile; check that your tool post accepts a 25 × 25 mm holder. If uncertain, METAV Werkzeuge can advise whether the Teknik Makina Turning Holder matches your machine interfaces and recommend any adapters. What does the 30° Cutting Angle and left‑hand direction imply for machining choices? A 30° Cutting Angle in this Teknik Makina holder positions RCMT 10T3 inserts for controlled chip breakage and surface quality; choose left‑hand turning setups or arrange workholding so that the tool approaches the workpiece in the left‑hand orientation specified. Can METAV Werkzeuge help with technical questions before buying the Turning Holder? Yes. METAV Werkzeuge offers detailed consultation for tooling choices, setup recommendations and compatibility checks for the Turning Holder by Teknik Makina — contact info@metav-werkzeuge.com or call +49 2822 7131930 for expert support. 150mm SRGCL 2525 Turning Holder for RCMT 10T3, 30° Cut, Left — Teknik Makina

Take advantage of a compact, rigid design with precise 30° cutting geometry and broad compatibility with RCMT 10T3 indexable inserts for consistent turning results; order the clamping holder directly via Metav Werkzeuge or ask our consultants if needed. SRGCR 2020 clamping holder — SRGC for RCMT indexable inserts, right-hand, Teknik Makina The SRGCR 2020 clamping holder is a right-hand turning toolholder engineered for stable, repeatable operations with RCMT 10T3 indexable inserts, offering a compact shank and a short overall length for minimal overhang. Precise 30° cutting angle for stable cuts Compatible with RCMT 10T3 inserts 20 x 20 mm shank for standard toolposts 125 mm overall length for rigid support Predictable cutting performance through rigid geometry The holder's 30° cutting angle and compact dimensions deliver a predictable cutting direction and improved chip control, reducing chatter in many turning scenarios. With a 20 x 20 mm shank and a 125 mm overall length, the assembly keeps overhang low and stiffness high, which translates into more consistent surface finish and longer insert life. The modest weight of 0.41 kg eases handling during changeovers while maintaining the mass needed to dampen vibrations. Wide insert compatibility to reduce tooling complexity Designed specifically for RCMT 10T3 indexable inserts and carrying the ISO designation SRGCR 2020, the holder supports established insert geometry and grades, enabling straightforward stocking strategies and quick reconditioning of tool rooms. The SRGC clamping concept secures the insert reliably, allowing economical use of indexable cutters and predictable tool life—benefits that add up in repetitive production environments and support lean tooling management. Faster set-up and straightforward integration into workshops The toolholder's 25 mm head width and 25 mm cutting-edge height match common lathe setups, so insertion height and toolpost fittings are easier to align. The unit's right-hand orientation and clear ISO marking simplify selection at the workstation, cutting set-up time and minimising adjustment iterations. Where operators rotate between jobs, the consistent geometry reduces set-up errors and supports quicker changeovers across similar machining tasks. Practical application: where this holder adds value This clamping holder is suited to deterministic turning operations where RCMT-style inserts are preferred for facing, light turning and semi-finishing work. The combination of ISO-standard form, compact shank and robust clamping geometry delivers a practical balance of rigidity, compatibility and ease of use. For workshops seeking to rationalise tooling while maintaining flexibility, this holder provides a dependable component to standardise on. Contact Metav Werkzeuge for Teknik Makina SRGCR 2020 holders and expert advice on RCMT compatibility and workshop supply at info@metav-werkzeuge.com or +49 2822 7131930 Technical Data SKU: D284TM Manufacturer: Teknik Makina Article designation ISO: SRGCR 2020 Product: SRGC for RCMT Indexable Inserts Suitable for inserts: RCMT 10T3 Cut direction: right Core technical data Overall length: 125 mm Shank width: 20 mm Shank height: 20 mm Head width: 25 mm Cutting edge height: 25 mm Cutting angle: 30° Weight: 0.41 kg Special features ISO designation SRGCR 2020 K10 shank designation Right-hand orientation Compatible with RCMT 10T3 inserts SRGC clamping geometry FAQ Which inserts fit this holder? The holder accepts RCMT 10T3 indexable inserts; it is configured specifically for the SRGC clamping geometry to match those insert dimensions. Is the toolholder right- or left-hand? This turning toolholder is a right-hand orientation, suitable for conventional right-hand turning operations. What are the shank dimensions and overall length? Shank dimensions are 20 x 20 mm and the overall length is 125 mm, offering a compact footprint for improved rigidity. What is the ISO designation for this holder? The ISO designation is SRGCR 2020, which identifies the holder form and helps ensure correct matching with inserts and toolposts. Can this holder reduce set-up time in a multi-operator workshop? Yes—consistent geometry, ISO marking and compatibility with RCMT inserts make set-up and tool changes faster and more repeatable across operators. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of a rigid clamping solution with precise geometry and proven compatibility with RCMT indexable inserts for reliable turning cycles; order the unit directly via Metav Werkzeuge or consult our specialists for integration advice. Clamping holder SRGCL 2020 — SRGC for RCMT indexable inserts, left‑hand, 30° lead The Clamping holder SRGCL 2020 is a left‑hand turning holder engineered for use with RCMT 10T3 indexable inserts, combining secure insert retention with predictable chip flow in medium‑duty turning operations. SRGCL 2020 for RCMT 10T3 inserts Left‑hand configuration, 30° lead angle 20 × 20 mm shank, 25 mm cutting head width 125 mm overall length, 0.41 kg mass Reliable clamping for consistent machining results The SRGCL 2020 is designed as a robust toolholder that prioritises secure insert retention and repeatability. The SRGC clamping style keeps the insert firmly seated, reducing micro‑movement under load and lowering the risk of chatter. With a 20 × 20 mm shank and an overall length of 125 mm, the holder balances rigidity and accessibility at the turret. These dimensions make it suitable for general turning operations where tool overhang must be minimised to preserve surface finish and extend insert life. The proven compatibility with RCMT 10T3 inserts ensures straightforward toolset standardisation across batches and reduces setup complexity. Geometry tailored for predictable cutting and chip control A left‑hand orientation combined with a 30° lead angle gives this holder definite cutting characteristics: it encourages controlled cut entry and directs chips away from the workpiece, which is particularly useful in batch turning where cycle stability matters. The 25 mm cutting head width and 25 mm cutting height are optimised to match RCMT geometry so that insert seating and edge projection produce consistent cutting engagement. For operators, this translates into fewer interruptions for tool checks and more dependable cycle times — a rational benefit that improves throughput and reduces scrap rates. Workshop integration and handling benefits Handling and mounting are simplified by the standard ISO designation SRGCL 2020 and the K10 shank style reference. At 0.41 kg, the holder is compact enough for fast turret indexing yet heavy enough to contribute to damping. The left‑hand configuration should be specified at the point of order to ensure turret compatibility. From a shopfloor perspective, the holder supports straightforward insert swaps and predictable tool offsets, which helps maintain setup consistency across operators and shifts. This practical approach supports efficient production planning and reduces machine downtime. Why this choice supports quality and availability Selecting this SRGC‑style holder aligns with a pragmatic production strategy: match the holder to RCMT 10T3 inserts already in use, standardise on the ISO SRGCL 2020 designation, and benefit from a compact, left‑hand geometry that improves chip evacuation. The result is a toolholder that contributes to consistent component quality and easier inventory management. As a trusted distributor, Metav Werkzeuge supplies products that are vetted for the European market and supported by technical advice when required. For workshop integration, request the SRGCL 2020 through Metav Werkzeuge to ensure the correct left‑hand configuration and insert compatibility — contact info@metav-werkzeuge.com or call +49 2822 7131930 to discuss application details and availability Technical data Article number: D283TM Manufacturer: Teknik Makina ISO designation: SRGCL 2020 Compatible inserts: RCMT 10T3 Facts Overall length: 125 mm Shank size: 20 × 20 mm Cutting head width: 25 mm Cutting height: 25 mm Holder height: 20 mm Cutting angle: 30° Weight: 0.41 kg Special features Left‑hand turning configuration K10 shank designation For RCMT 10T3 indexable inserts SRGC clamping mechanism FAQ Which inserts fit this holder? The holder is specified for RCMT 10T3 indexable inserts; the SRGCL 2020 geometry matches that insert form for secure seating and correct edge projection. Is this holder for left or right turning? This unit is a left‑hand configuration with a 30° lead angle, intended for left‑hand turning operations. What shank size and length does it require? The shank is 20 × 20 mm and the overall length is 125 mm, making it suited to turrets that accept square shanks of this size. Can the holder be used for finishing cuts? With its rigid clamping and modest overhang, the holder supports fine finishing passes when combined with the appropriate RCMT 10T3 grades and correct cutting parameters. What are the weight and physical dimensions to consider for turret setup? Weight is 0.41 kg; key dimensions include 20 × 20 mm shank, 25 mm cutting head width and 125 mm overall length, which should be checked against turret clearance. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com