40mm Cutter For APKT1604 Indexable Inserts 25mm Shank 45mm Cutting Length 90° Cut 4 Flutes, M4x10 Torx T15 - Teknik Makina
€63.00
Product information "40mm Cutter For APKT1604 Indexable Inserts 25mm Shank 45mm Cutting Length 90° Cut 4 Flutes, M4x10 Torx T15 - Teknik Makina"
Benefit from the combination of robust shank dimensions and indexable-insert compatibility to secure stable, repeatable milling results in daily production. Order the tool directly via Metav Werkzeuge or consult the technical team for precise pairing and setup advice.
Shank milling cutter for APKT 1003-1604 Indexable Inserts – 40 mm dia, 25 mm shank (Teknik Makina)
The Shank milling cutter for APKT 1003-1604 Indexable Inserts is a purpose-built insert milling cutter intended for efficient face and peripheral milling where quick insert changes and consistent cutting geometry are required.
- 40 mm cutting diameter
- 25 mm shank diameter
- Compatible with APKT1604 inserts
- Four cutting edges for smooth removal
Consistent cutting performance for predictable results
The tool is designed to deliver a reliable cutting pattern using a 40 mm diameter and 4 cutting edges, which together promote balanced material removal and reduced cutting forces. The 90° cutting geometry yields a defined shoulder finish and helps maintain dimensional accuracy during face milling operations. For users evaluating cycle time, the combination of cutter diameter and edge count supports higher material removal rates while preserving surface quality. The physical balance and mass distribution of the tool contribute to vibration damping, which results in fewer rework cycles and a steadier machining process.
Secure clamping and straightforward insert handling
Retention and repeatability are supported by a robust fastening arrangement: an M4x10 Torx screw with a T15 Torx key secures the indexable insert, ensuring consistent seat location and torque control. Compatibility with APKT1604 indexable inserts simplifies stock management and allows quick replacement during shift changes. For production environments where tool changeover speed matters, the standardised insert format and straightforward clamping reduce downtime and make insert rotation or replacement a routine, low-risk operation.
Optimised geometry for workshop integration
With a 25 mm shank, 45 mm cutting length, and 120 mm overall length, the cutter is sized for stability in common toolholders while still providing sufficient reach for many milling tasks. The listed 0.516 kg mass contributes to tool rigidity without imposing excessive spindle load, which is important for maintaining spindle life and consistent spindle dynamic behaviour. The tool’s dimensions are compatible with typical milling setups, supporting integration into existing tool lists where repeatability and simple tool management are priorities.
Practical application guidance and production benefits
The cutter is suitable for workshop and industrial settings that require dependable insert milling with standard APKT insert geometries. Compatibility with inserts from established manufacturers such as YG-1 helps to reduce logistics complexity and secures replacement availability. Specifying this cutter supports predictable cycle times, simplified tooling inventory and a clear maintenance routine for insert inspection and rotation. If a machining strategy requires assessment, technical consultation can be sought to establish optimal feeds, speeds and insert grades for particular materials and component tolerances.
Contact Metav Werkzeuge for tailored advice on selecting the right Teknik Cutting Tools shank milling cutter and the optimal APKT1604 insert pairing to maximise production uptime
Technical data
- Article number: S046TM
- Manufacturer: Teknik Makina
- Name: Shank milling cutter
- Description: for APKT 1003-1604 Indexable Inserts
- eClass: 21180806
- ETIM: EC011860
Numbers
- Diameter: 40 mm
- Shank diameter: 25 mm
- Cutting length: 45 mm
- Overall length: 120 mm
- Number of cutting edges: 4
- Weight: 0.516 kg
- Cutting angle: 90°
Special features
- Compatible insert: APKT1604
- Compatible insert manufacturer: YG-1
- Torx screw: M4x10
- Torx key size: T15
- For APKT 1003-1604 indexable inserts
FAQ
What insert type fits this milling cutter?
The cutter is designed for APKT1604 indexable inserts and accepts APKT 1003–1604 sizes as specified for secure seating and correct cutting geometry.
Which manufacturers’ inserts are compatible?
Compatibility is confirmed with YG-1 inserts; the cutter accepts APKT1604 inserts from standard suppliers, facilitating procurement and stocking.
What is the shank diameter and why does it matter?
Shank diameter is 25 mm; a solid shank of this diameter delivers greater rigidity in the holder, reducing deflection and improving dimensional stability in the machined component.
Is the fastening method industry standard?
Yes; the insert is secured with an M4x10 Torx screw requiring a T15 key, a common and reliable method that ensures repeatable clamping torque and precise insert location.
Can this cutter be used for both face and peripheral milling?
The cutter’s 90° cutting angle and multiple cutting edges make it suitable for defined shoulder and face milling operations where repeatable geometry and a consistent surface finish are required.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 90.0 |
|---|---|
| Designation: | Schaftfräser |
| Diameter-1: | 40mm |
Passende Wendeplatten MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Features inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-Aluminium Figures for the tool: ISO-Code: APKT160402 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.2 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-CastIron Facts for the tool: ISO-Code: APKT160402 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.2 Features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Cast Iron-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for indexable inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-Stainless Facts and Figures: ISO-Code: APKT160402 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.2 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Stainless Steel-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-Steel ISO-Code: APKT160402 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Stahl-MetavCUT 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Specifications APKT 160404 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160404-Aluminium Data/ Figures: ISO-Code: APKT160404 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160404-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for APKT 160404 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160404-Stainless Facts for the tool: ISO-Code: APKT160404 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160404-Stainless Steel-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Design details indexable inserts APKT 160404 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160404-Steel Figures for the tool: ISO-Code: APKT160404 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160404-Stahl-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Features for inserts APKT 160406 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-Aluminium Figures for the tool: ISO-Code: APKT160406 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.6 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts APKT 160406 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-CastIron Facts and Figures: ISO-Code: APKT160406 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.6 Special features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Cast Iron-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product details for APKT 160406 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-Stainless ISO-Code: APKT160406 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0.6 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Stainless Steel-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Performance features for indexable inserts APKT 160406 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-Steel Facts for the tool: ISO-Code: APKT160406 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.6 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts APKT 160408 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160408-Aluminium Facts and Figures: ISO-Code: APKT160408 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160408-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts APKT 160408 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160408-Stainless Dataand Figures: ISO-Code: APKT160408 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160408-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features APKT 160408 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160408-Steel Figures for the tool: ISO-Code: APKT160408 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160408-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features insert APKT 160412 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-Aluminium ISO-Code: APKT160412 Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details APKT 160412 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-CastIron Dataand Figures: ISO-Code: APKT160412 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Cast Iron-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Features APKT 160412 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-Stainless Figures for the tool: ISO-Code: APKT160412 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Stainless Steel-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features APKT 160412 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-Steel Facts and Figures: ISO-Code: APKT160412 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Stahl-MetavCUT 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing directly by post. Product details for insert APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416-Aluminium ISO-Code: APKT160416 Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1.6 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416-Stainless Facts & Figures: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Stainless Steel-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416-Steel Figures for the tool: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416FR-MA2-Aluminium Data & Figures: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product specifications APKT 160420 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420-Aluminium Facts for the tool: ISO-Code: APKT160420 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Performance features APKT 160420 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420-Stainless ISO-Code: APKT160420 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Stainless Steel-MetavCUT 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Product characteristics for APKT 160420 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420-Steel Facts for the tool: ISO-Code: APKT160420 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Detail specifications for inserts APKT 160420 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420FR-MA3-Aluminium Facts / Figures: ISO-Code: APKT160420 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for APKT 160424 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160424-Aluminium Data & Figures: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160424-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics APKT 160424 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160424-Stainless Facts and Figures: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160424-Stainless Steel-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Design details APKT 160424 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160424-Steel Facts for the tool: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160424-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features APKT 160425 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-Aluminium Facts / Figures: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for APKT 160425 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-CastIron Figures for the tool: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Cast Iron-MetavCUT 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us a sample insert or drawing by post Product features for indexable inserts APKT 160425 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-Stainless Figures for the tool: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for APKT 160425 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-Steel Data/ Figures: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications APKT 160430 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160430-Aluminium ISO-Code: APKT160430 Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160430-Aluminium-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts APKT 160430 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160430-Stainless Facts & Figures: ISO-Code: APKT160430 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160430-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features for APKT 160430 inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160430-Steel Dataand Figures: ISO-Code: APKT160430 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160430-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts APKT 160432 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160432FR-MA2-Aluminium Figures for the tool: ISO-Code: APKT160432 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3.2 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160432-Aluminium-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing directly by post. Design details for APKT 160432 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160432R-MM1-Stainless ISO-Code: APKT160432 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160432-Stainless Steel-MetavCUT 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing by post. Features APKT 160432 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160432R-MM1-Steel ISO-Code: APKT160432 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160432-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features APKT 160440 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-Aluminium Facts and Figures: ISO-Code: APKT160440 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Performance features for APKT 160440 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-CastIron ISO-Code: APKT160440 Usage for: Cast steel Material: cemented carbide Form: parallelogram Usable to the work on: Cast Iron Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 4 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Cast Iron-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Information on technical features indexable inserts APKT 160440 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-Stainless ISO-Code: APKT160440 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 4 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features for APKT 160440 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-Steel Data & Figures: ISO-Code: APKT160440 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 4 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications APKT 1604PD inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDFR-MA-Aluminium Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Specifications APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDFR-MA2-Aluminium Data/ Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDFR-MA3-Aluminium ISO-Code: APKT1604PD Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product features for indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MF-Stainless Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MF-Steel Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MM-Stainless Data/ Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Specifications indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MM-Steel Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Features indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-Stainless Data & Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product details for APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-Steel Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for insert APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-X22-Stainless ISO-Code: APKT1604PD Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product features indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-X22-Steel ISO-Code: APKT1604PD Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDTR-X22-Stainless Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Detail specifications for indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDTR-X22-Steel ISO-Code: APKT1604PD Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Detail specifications for APKT 160410 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-Steel ISO-Code: APKT160410 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Stahl-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Product characteristics for indexable inserts APKT 160410 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-Aluminium Facts and Figures: ISO-Code: APKT160410 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Performance features for indexable inserts APKT 160410 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-CastIron Figures for the tool: ISO-Code: APKT160410 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1 Features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Cast Iron-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product specifications for indexable inserts APKT 160410 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-Stainless ISO-Code: APKT160410 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Stainless Steel-MetavCUT 40END