25mm 90° Cutter For APKT 1604 Indexable Inserts, 2 Flutes, 45mm Cutting Length - Teknik Makina
€50.00
Product information "25mm 90° Cutter For APKT 1604 Indexable Inserts, 2 Flutes, 45mm Cutting Length - Teknik Makina"
Benefit from precise 90° shoulder milling combined with a robust 25 mm shank and 45 mm cutting length for consistent tool life and stable machining. The design for APKT 1604 indexable inserts reduces downtime through quick insert changes. Order the cutter directly via Metav Werkzeuge or contact our consultants for specification advice.
S256TM Shaft Cutter — Indexable milling cutter for APKT 1604, 25 mm shank (Teknik Makina)
S256TM is a 90° indexable milling cutter intended for robust shoulder and face milling operations with APKT 1604 inserts
- 90° cutting angle for square shoulders
- 25 mm shank for stable clamping
- Compatible with Korloy APKT 1604 inserts
- Torx M4x10 screw, T15 interface
Accuracy and rigidity for repeatable shoulder milling
The 90° geometry delivers consistently square shoulders and predictable tool engagement, which helps to maintain part tolerances in batch production. The combination of a 25 mm shank and an overall length of 120 mm improves axial rigidity and reduces chatter when compared with slender tooling. Where tight geometry is required, the 45 mm cutting length provides adequate reach without unnecessary overhang, assisting in maintaining surface finish and dimensional stability. These characteristics translate directly into fewer reworks and more reliable cycle times on production runs.
Quick insert changes and secure clamping to reduce downtime
Designed for indexable inserts, the cutter accepts APKT 1604 plates and secures them with a Torx M4x10 screw accessed via a T15 key interface. The use of indexable tooling means the cutting edge can be renewed rapidly by replacing the insert rather than the entire tool body, lowering tooling costs over time. With two cutting edges per insert, the system supports efficient use of insert geometry and enables straightforward rotation or replacement, contributing to higher machine uptime and simpler maintenance routines. The S256TM construction focuses on reliable clamping and repeatable seating of the insert pocket.
Predictable throughput and simplified tool management
Indexable systems like this cutter promote predictable total cost of ownership: indexable inserts concentrate the wearing element into small, replaceable parts while the tool body remains a long-term asset. For operations that favour batch processing or mixed-series production, the ability to standardise on APKT 1604 inserts simplifies inventory and reorder processes. The cutter’s balanced dimensions and specified geometry make it suitable for general industrial milling tasks where a 90° cutting angle is required; the result is sustained productivity with reduced planning complexity and straightforward tool change procedures.
Supply reliability and partner expertise from Metav
Procured through Metav Werkzeuge, this cutter benefits from a supplier positioned as a “quality filter” for the European market. Metav combines decades of precision competence with broad product availability, supporting workshops and manufacturing with a large catalogue and dependable logistics. The established customer base and comprehensive assortment reduce procurement risk and help centralise tooling needs. For purchasers seeking consistent supply and technical guidance, Metav’s expertise complements the cutter’s technical strengths and supports seamless integration into existing toolsets.
Choose Teknik Makina’s S256TM for reliable 90° milling and contact Metav Werkzeuge for tailored technical advice and supply via info@metav-werkzeuge.com or by telephone on +49 2822 7131930
Technical Data
- Article number: S256TM
- Manufacturer: Teknik Cutting Tools
- Suitable for inserts: APKT 1604
- Compatible insert manufacturer: Korloy
- Shank diameter: 25 mm
- Cutting length: 45 mm
- Cutting angle: 90°
- Number of cutting edges: 2
- Overall length: 120 mm
- Weight: 0.43 kg
- Torx screw: M4x10 (T15)
Core Data
- Shank diameter: 25 mm
- Cutting length: 45 mm
- Overall length: 120 mm
- Weight: 0.43 kg
- Cutting angle: 90°
- Cutting edges: 2
Special features
- For APKT 1604 indexable inserts
- Compatible with Korloy inserts
- Torx M4x10 screw, T15 interface
- SKU: S256TM
- Brand: Teknik Makina
FAQ
What inserts fit this cutter?
The cutter is designed for APKT 1604 indexable inserts and is compatible with Korloy plates shaped to that designation.
How is the insert secured in the cutter?
Inserts are held by a Torx screw (M4x10) using a T15 key; the fastening system is designed for repeatable seating and reliable clamping.
Is the S256TM suitable for shoulder milling?
Yes — the 90° cutting angle makes the S256TM particularly suitable for square shoulder and face milling operations with predictable geometry.
How many cutting edges are used per insert?
Each insert provides two cutting edges, enabling rotation or replacement to extend usable life before disposal.
Where can replacement inserts or spares be sourced?
Replacement APKT 1604 inserts from Korloy and spare fastening screws can be supplied through Metav Werkzeuge as part of routine replenishment.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 90.0 |
|---|---|
| Designation: | Schaftfräser |
| Diameter-1: | 25mm |
Passende Wendeplatten MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Features inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-Aluminium Figures for the tool: ISO-Code: APKT160402 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.2 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-CastIron Facts for the tool: ISO-Code: APKT160402 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.2 Features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Cast Iron-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for indexable inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-Stainless Facts and Figures: ISO-Code: APKT160402 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.2 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Stainless Steel-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-Steel ISO-Code: APKT160402 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Stahl-MetavCUT 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Specifications APKT 160404 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160404-Aluminium Data/ Figures: ISO-Code: APKT160404 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160404-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for APKT 160404 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160404-Stainless Facts for the tool: ISO-Code: APKT160404 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160404-Stainless Steel-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Design details indexable inserts APKT 160404 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160404-Steel Figures for the tool: ISO-Code: APKT160404 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160404-Stahl-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Features for inserts APKT 160406 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-Aluminium Figures for the tool: ISO-Code: APKT160406 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.6 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts APKT 160406 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-CastIron Facts and Figures: ISO-Code: APKT160406 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.6 Special features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Cast Iron-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product details for APKT 160406 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-Stainless ISO-Code: APKT160406 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0.6 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Stainless Steel-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Performance features for indexable inserts APKT 160406 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-Steel Facts for the tool: ISO-Code: APKT160406 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.6 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts APKT 160408 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160408-Aluminium Facts and Figures: ISO-Code: APKT160408 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160408-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts APKT 160408 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160408-Stainless Dataand Figures: ISO-Code: APKT160408 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160408-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features APKT 160408 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160408-Steel Figures for the tool: ISO-Code: APKT160408 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160408-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features insert APKT 160412 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-Aluminium ISO-Code: APKT160412 Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details APKT 160412 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-CastIron Dataand Figures: ISO-Code: APKT160412 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Cast Iron-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Features APKT 160412 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-Stainless Figures for the tool: ISO-Code: APKT160412 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Stainless Steel-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features APKT 160412 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-Steel Facts and Figures: ISO-Code: APKT160412 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Stahl-MetavCUT 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing directly by post. Product details for insert APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416-Aluminium ISO-Code: APKT160416 Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1.6 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416-Stainless Facts & Figures: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Stainless Steel-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416-Steel Figures for the tool: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product specifications APKT 160420 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420-Aluminium Facts for the tool: ISO-Code: APKT160420 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Performance features APKT 160420 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420-Stainless ISO-Code: APKT160420 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Stainless Steel-MetavCUT 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Product characteristics for APKT 160420 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420-Steel Facts for the tool: ISO-Code: APKT160420 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for APKT 160424 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160424-Aluminium Data & Figures: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160424-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics APKT 160424 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160424-Stainless Facts and Figures: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160424-Stainless Steel-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Design details APKT 160424 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160424-Steel Facts for the tool: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160424-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features APKT 160425 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-Aluminium Facts / Figures: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for APKT 160425 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-CastIron Figures for the tool: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Cast Iron-MetavCUT 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us a sample insert or drawing by post Product features for indexable inserts APKT 160425 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-Stainless Figures for the tool: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for APKT 160425 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-Steel Data/ Figures: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications APKT 160430 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160430-Aluminium ISO-Code: APKT160430 Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160430-Aluminium-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts APKT 160430 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160430-Stainless Facts & Figures: ISO-Code: APKT160430 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160430-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features for APKT 160430 inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160430-Steel Dataand Figures: ISO-Code: APKT160430 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160430-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features APKT 160440 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-Aluminium Facts and Figures: ISO-Code: APKT160440 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Performance features for APKT 160440 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-CastIron ISO-Code: APKT160440 Usage for: Cast steel Material: cemented carbide Form: parallelogram Usable to the work on: Cast Iron Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 4 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Cast Iron-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Information on technical features indexable inserts APKT 160440 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-Stainless ISO-Code: APKT160440 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 4 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features for APKT 160440 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-Steel Data & Figures: ISO-Code: APKT160440 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 4 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Stahl-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Detail specifications for APKT 160410 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-Steel ISO-Code: APKT160410 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Stahl-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Product characteristics for indexable inserts APKT 160410 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-Aluminium Facts and Figures: ISO-Code: APKT160410 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Performance features for indexable inserts APKT 160410 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-CastIron Figures for the tool: ISO-Code: APKT160410 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1 Features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Cast Iron-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product specifications for indexable inserts APKT 160410 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-Stainless ISO-Code: APKT160410 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416FR-MA2-Aluminium Data & Figures: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Detail specifications for inserts APKT 160420 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420FR-MA3-Aluminium Facts / Figures: ISO-Code: APKT160420 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts APKT 160432 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160432FR-MA2-Aluminium Figures for the tool: ISO-Code: APKT160432 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3.2 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160432-Aluminium-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing directly by post. Design details for APKT 160432 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160432R-MM1-Stainless ISO-Code: APKT160432 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160432-Stainless Steel-MetavCUT 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing by post. Features APKT 160432 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160432R-MM1-Steel ISO-Code: APKT160432 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160432-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications APKT 1604PD inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDFR-MA-Aluminium Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Specifications APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDFR-MA2-Aluminium Data/ Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDFR-MA3-Aluminium ISO-Code: APKT1604PD Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product features for indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MF-Stainless Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MF-Steel Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MM-Stainless Data/ Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Specifications indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MM-Steel Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Features indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-Stainless Data & Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product details for APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-Steel Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for insert APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-X22-Stainless ISO-Code: APKT1604PD Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product features indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-X22-Steel ISO-Code: APKT1604PD Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDTR-X22-Stainless Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Detail specifications for indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDTR-X22-Steel ISO-Code: APKT1604PD Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
Passende Wendeplatten von Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts APKT 1604PD from Kennametal Brand: Kennametal Manufacturer Order Number: APKT1604PDTR-KCPK30-KENNAMETAL Facts and Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: KCPK30 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-APKT-1604PD-KCPK30-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features APKT 1604PD indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: APKT1604PDTR-KC725M-KENNAMETAL ISO-Code: APKT1604PD Grade: KC725M Material: cemented carbide Form: parallelogram Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Chip Breaker: single-sided Angle: 85° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-APKT-1604PD-KC725M-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts APKT 1604PD from Kennametal Brand: Kennametal Manufacturer Order Number: APKT1604PDR-KC725M-KENNAMETAL Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: KC725M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-APKT-1604PD-KC725M-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Information on technical features for indexable inserts APKT 160432 from Kennametal Brand: Kennametal Manufacturer Order Number: APKT160432R-KC725M-KENNAMETAL ISO-Code: APKT160432 Grade: KC725M Material: cemented carbide Form: parallelogram Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-APKT-160432-KC725M-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Design details for APKT 160416 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: APKT160416R-KC725M-KENNAMETAL Dataand Figures: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Features Material: cemented carbide Grade: KC725M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-APKT-160416-KC725M-Kennametal 40END
Passende Wendeplatten ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for insert APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-76IC4050 Data & Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Special features Material: cemented carbide Grade: IC4050 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC4050-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features insert APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-76IC328 Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC328 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-APKT-1604PD-IC328-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC910 Series: HELIMILL/HELI2000 ISO-Code: APKT1604PD Grade: IC910 Material: cemented carbide Form: parallelogram Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Chip Breaker: single-sided Angle: 85° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APKT-1604PD-IC910-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications insert APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC520M Facts & Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC520M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC520M-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product specifications for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC50M Data/ Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC50M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC50M-ISCAR 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Performance features for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC328 Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Special features Material: cemented carbide Grade: IC328 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APKT-1604PD-IC328-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Performance features for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC30N Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC30N with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-APKT-1604PD-IC30N-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC250 Facts & Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-APKT-1604PD-IC250-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC20 Facts and Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC20-ISCAR 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Specifications for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-76IC950 Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Special features Material: cemented carbide Grade: IC950 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC950-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-76IC928 Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC928 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC928-ISCAR 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product characteristics for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDL-HMIC328 Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Special features Material: cemented carbide Grade: IC328 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC328-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for APKT 160448 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT160448R-HMIC250 Figures for the tool: ISO-Code: APKT160448 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 4.8 Special features Material: cemented carbide Grade: IC250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APKT-160448-IC250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts APKT 160432 from ISCAR Brand: ISCAR Manufacturer Order Number: APKT160432R-HMIC328 Facts for the tool: ISO-Code: APKT160432 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3.2 Features Material: cemented carbide Grade: IC328 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APKT-160432-IC328-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product characteristics for indexable inserts APKT 160424 from ISCAR Brand: ISCAR Manufacturer Order Number: APKT160424R-HMIC520M Dataand Figures: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Special features Material: cemented carbide Grade: IC520M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APKT-160424-IC520M-ISCAR 40END