35mm Shell Mill For APKT 1604 Indexable Inserts 3 Cutting Edges, 350mm Overall Length - Teknik Makina
€127.00
Product information "35mm Shell Mill For APKT 1604 Indexable Inserts 3 Cutting Edges, 350mm Overall Length - Teknik Makina"
Take advantage of a robust, long-reach shank design and precise compatibility with APKT 1604 indexable inserts to maintain steady production and predictable tool life; order the cutting solution directly via Metav Werkzeuge or consult our specialists for sizing and application advice.
Shaft milling cutter S454TM – 35 mm diameter shank cutter for APKT 1604 indexable inserts by Teknik Makina
The Shaft milling cutter S454TM is a long-reach shank cutter engineered for reliable face and shoulder milling with indexable inserts, suited to production and workshop environments where repeatable performance and straightforward insert changes matter.
*Compatible with APKT 1604 Korloy inserts
*35 mm cutting diameter for robust milling
*32 mm shank, 350 mm overall length
Reliable insert system for predictable machining results
This shank cutter uses APKT 1604 indexable inserts, a widely available insert format that simplifies tool management and minimises downtime during regrinds or replacements. The insert interface ensures consistent seat location and repeatable cutting geometry; when paired with Korloy inserts the tool achieves uniform chip control and stable cutting forces. The main benefit is reduced clamping and setup time, which supports steady-cycle production and easier inventory handling of spare inserts.
Stiff shank and extended reach reduce deflection in deep operations
With a 32 mm shank and an overall length of 350 mm, the tool is designed for jobs requiring extended reach without sacrificing rigidity. The larger shank diameter improves resistance to bending and vibration, which in turn protects surface finish and tool life when performing shoulder milling or light slotting. For workshops facing occasional long-reach passes, this tool offers a balance between accessibility and stability, translating to fewer rejects and less rework.
Efficient cutting geometry for shorter cycle times
Equipped with three cutting edges and a 90° cutting angle, the cutter provides efficient material removal and good radial support for shoulder faces. The arrangement of edges supports even load distribution across inserts, allowing consistent feed rates and predictable machining times. Where throughput is critical, this geometry delivers a higher material removal rate compared with single-edge solutions, while still offering straightforward indexable-insert replacement for sustained productivity.
Service-friendly assembly and clear maintenance cues
Fast, tool-free insert changes are supported by a simple Torx fixing system (screw M4x10, key T15), enabling quick exchange of worn inserts on the shopfloor. The use of a standard Torx screw reduces the risk of incorrect fastening tools and helps maintain correct clamping torque for secure insert seating. As a result, maintenance intervals are easier to plan and the toolholder remains accessible to trained technicians, helping to keep uptime high.
For a reliable Teknik Makina shank solution that fits existing APKT 1604 insert stocks, contact Metav Werkzeuge for tailored procurement and technical assistance by phone +49 2822 7131930 or by email at info@metav-werkzeuge.com
Technical data
-
Article number: S454TM
-
Manufacturer: Teknik Makina
-
Suitable for inserts: APKT 1604
-
Compatible insert brand: Korloy
-
Torx screw: M4x10
-
Torx key: T15
Facts
- Cutting diameter: 35 mm
- Shank diameter: 32 mm
- Cutting length (shank cutting): 65 mm
- Overall length: 350 mm
- Number of cutting edges: 3
- Cutting angle: 90°
- Weight: 2.332 kg
Special features
- Indexable inserts system
- Long-reach shank design
- Standard Torx fastening for inserts
- Suitable for face and shoulder milling
FAQ
Which inserts fit this cutter?
The cutter accepts APKT 1604 indexable inserts; compatibility has been specified for Korloy inserts and standard seat geometry.
Is the shank suitable for heavy milling?
The 32 mm shank and 350 mm overall length of the S454TM balance reach and rigidity; for heavy roughing, ensure clamping and machine rigidity are adequate.
What fasteners are used for insert fixation?
Insert fastening uses a Torx screw M4x10 and Torx key T15, enabling secure and repeatable clamping of the inserts.
Can the cutter be used for finishing passes?
Yes — with the correct choice of APKT 1604 finishing inserts, the toolhead is suitable for finishing shoulders and face milling where indexable-insert solutions are preferred.
What are the main benefits of this Teknik Makina shank cutter?
The Teknik Makina S454TM provides straightforward insert replacement, extended reach with reduced deflection thanks to its 32 mm shank, and efficient cutting via three cutting edges for improved cycle times.
Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com
| Cutting angle: | 90.0 |
|---|---|
| Designation: | Schaftfräser |
| Diameter-1: | 35mm |
Passende Wendeplatten von Kennametal
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts APKT 1604PD from Kennametal Brand: Kennametal Manufacturer Order Number: APKT1604PDTR-KCPK30-KENNAMETAL Facts and Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: KCPK30 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Ownership of brand names and protected trademarks remains with their owners. The indication of brand names and trademarks is for information purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-APKT-1604PD-KCPK30-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product features APKT 1604PD indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: APKT1604PDTR-KC725M-KENNAMETAL ISO-Code: APKT1604PD Grade: KC725M Material: cemented carbide Form: parallelogram Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Chip Breaker: single-sided Angle: 85° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the Kennametal brand. 40START indexable-inserts-APKT-1604PD-KC725M-Kennametal 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts APKT 1604PD from Kennametal Brand: Kennametal Manufacturer Order Number: APKT1604PDR-KC725M-KENNAMETAL Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: KC725M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. There is no connection whatsoever between our company and the brands mentioned. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-APKT-1604PD-KC725M-Kennametal 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Information on technical features for indexable inserts APKT 160432 from Kennametal Brand: Kennametal Manufacturer Order Number: APKT160432R-KC725M-KENNAMETAL ISO-Code: APKT160432 Grade: KC725M Material: cemented carbide Form: parallelogram Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand Kennametal. 40START indexable-inserts-APKT-160432-KC725M-Kennametal 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Design details for APKT 160416 indexable inserts from Kennametal Brand: Kennametal Manufacturer Order Number: APKT160416R-KC725M-KENNAMETAL Dataand Figures: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Features Material: cemented carbide Grade: KC725M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Kennametal; 600 Grant Street, Suite 5100, Pittsburgh, PA 15219, USA; www.kennametal.com; ftmill.service@kennametal.com Brand names and registered trademarks are the property of their respective owners. The inclusion of registered trademarks and trade names is for illustrative purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer Kennametal. 40START indexable-inserts-APKT-160416-KC725M-Kennametal 40END
Passende Wendeplatten ISCAR
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for insert APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-76IC4050 Data & Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Special features Material: cemented carbide Grade: IC4050 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC4050-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Features insert APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-76IC328 Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC328 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. There is no connection whatsoever between our company and the brands mentioned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-APKT-1604PD-IC328-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Technical data for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC910 Series: HELIMILL/HELI2000 ISO-Code: APKT1604PD Grade: IC910 Material: cemented carbide Form: parallelogram Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Chip Breaker: single-sided Angle: 85° Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APKT-1604PD-IC910-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications insert APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC520M Facts & Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC520M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il The rights to brand names and registered trademarks are held by their rightful owners. The mention of protected brand names and trademarks is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC520M-ISCAR 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product specifications for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC50M Data/ Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC50M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC50M-ISCAR 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Performance features for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC328 Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Special features Material: cemented carbide Grade: IC328 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APKT-1604PD-IC328-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Performance features for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC30N Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC30N with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The naming of brand names and protected trademarks is for descriptive purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-APKT-1604PD-IC30N-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC250 Facts & Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered brand names and trademarks are the property of their respective owners. The designation of brand names and trademarks is for explanatory purposes only. Our company has no commercial, legal or other connection with the brands concerned. The sales offer includes high-quality, new branded articles from the manufacturer ISCAR. 40START indexable-inserts-APKT-1604PD-IC250-ISCAR 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features indexable inserts APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-HMIC20 Facts and Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC20 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The article presented is a brand-new original product of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC20-ISCAR 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Specifications for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-76IC950 Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Special features Material: cemented carbide Grade: IC950 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. The indication of brand names and trademarks is for information purposes only. There is no connection whatsoever between our company and the brands mentioned. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC950-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts APKT 1604PD from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDR-76IC928 Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Features Material: cemented carbide Grade: IC928 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their respective owners. The naming of brand names and protected trademarks is for descriptive purposes only. Named brands are in no way associated or co-operate with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC928-ISCAR 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Forward your drawing directly to us by e-mail.► Send us your sample insert or drawing by post. Product characteristics for APKT 1604PD indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT1604PDL-HMIC328 Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Special features Material: cemented carbide Grade: IC328 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Ownership of brand names and protected trademarks remains with their owners. The mention of protected trademarks and trade names is for illustrative purposes only. The brands mentioned are not in any contractual relationship with our company. The items offered are original, brand-new goods of the ISCAR brand. 40START indexable-inserts-APKT-1604PD-IC328-ISCAR 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for APKT 160448 indexable inserts from ISCAR Brand: ISCAR Manufacturer Order Number: APKT160448R-HMIC250 Figures for the tool: ISO-Code: APKT160448 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 4.8 Special features Material: cemented carbide Grade: IC250 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and registered trademarks are the property of their rightful owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Named brands are in no way associated or co-operate with our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APKT-160448-IC250-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Specifications for indexable inserts APKT 160432 from ISCAR Brand: ISCAR Manufacturer Order Number: APKT160432R-HMIC328 Facts for the tool: ISO-Code: APKT160432 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3.2 Features Material: cemented carbide Grade: IC328 with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Brand names and protected trademarks are the property of their respective owners. The use of brand names and trademarks is for descriptive purposes only. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APKT-160432-IC328-ISCAR 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product characteristics for indexable inserts APKT 160424 from ISCAR Brand: ISCAR Manufacturer Order Number: APKT160424R-HMIC520M Dataand Figures: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Special features Material: cemented carbide Grade: IC520M with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Series: HELIMILL/HELI2000 Manufacturer: ISCAR Ltd.; Industrial Zone, P.O.Box 11; 24959 Tefen; Israel; www.iscar.so.il; info@iscar.co.il Registered trademarks and trade names are the property of their respective owners. Brand names and protected trademarks are mentioned solely for explanatory purposes. Mention of the brands does not imply any relationship to our company. This is a brand new original product of the leading brand ISCAR. 40START indexable-inserts-APKT-160424-IC520M-ISCAR 40END
Passende Wendeplatten MetavCUT
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Features inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-Aluminium Figures for the tool: ISO-Code: APKT160402 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.2 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for indexable inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-CastIron Facts for the tool: ISO-Code: APKT160402 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.2 Features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Cast Iron-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Detail specifications for indexable inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-Stainless Facts and Figures: ISO-Code: APKT160402 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.2 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Stainless Steel-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts APKT 160402 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160402-Steel ISO-Code: APKT160402 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160402-Stahl-MetavCUT 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Specifications APKT 160404 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160404-Aluminium Data/ Figures: ISO-Code: APKT160404 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160404-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details for APKT 160404 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160404-Stainless Facts for the tool: ISO-Code: APKT160404 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160404-Stainless Steel-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Design details indexable inserts APKT 160404 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160404-Steel Figures for the tool: ISO-Code: APKT160404 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.4 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160404-Stahl-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Features for inserts APKT 160406 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-Aluminium Figures for the tool: ISO-Code: APKT160406 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.6 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts APKT 160406 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-CastIron Facts and Figures: ISO-Code: APKT160406 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.6 Special features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Cast Iron-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com Product details for APKT 160406 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-Stainless ISO-Code: APKT160406 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0.6 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Stainless Steel-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Performance features for indexable inserts APKT 160406 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160406-Steel Facts for the tool: ISO-Code: APKT160406 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.6 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160406-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product characteristics for indexable inserts APKT 160408 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160408-Aluminium Facts and Figures: ISO-Code: APKT160408 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160408-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications indexable inserts APKT 160408 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160408-Stainless Dataand Figures: ISO-Code: APKT160408 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.8 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160408-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features APKT 160408 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160408-Steel Figures for the tool: ISO-Code: APKT160408 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0.8 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160408-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features insert APKT 160412 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-Aluminium ISO-Code: APKT160412 Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Aluminium-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Design details APKT 160412 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-CastIron Dataand Figures: ISO-Code: APKT160412 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Cast Iron-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Features APKT 160412 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-Stainless Figures for the tool: ISO-Code: APKT160412 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Stainless Steel-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Features APKT 160412 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160412-Steel Facts and Figures: ISO-Code: APKT160412 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.2 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160412-Stahl-MetavCUT 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing directly by post. Product details for insert APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416-Aluminium ISO-Code: APKT160416 Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1.6 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416-Stainless Facts & Figures: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Stainless Steel-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features for indexable inserts APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416-Steel Figures for the tool: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product specifications APKT 160420 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420-Aluminium Facts for the tool: ISO-Code: APKT160420 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 ☎️ Phone: +49 2822 7131930 Performance features APKT 160420 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420-Stainless ISO-Code: APKT160420 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Stainless Steel-MetavCUT 40END
Didn't find the right insert in our selection? No problem, we are at your side!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us a sample insert or drawing by post Product characteristics for APKT 160420 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420-Steel Facts for the tool: ISO-Code: APKT160420 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product characteristics for APKT 160424 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160424-Aluminium Data & Figures: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160424-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics APKT 160424 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160424-Stainless Facts and Figures: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160424-Stainless Steel-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a picture of your insert directly by e-mail.► Send us a drawing by email► Send us your sample insert or drawing by post. Design details APKT 160424 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160424-Steel Facts for the tool: ISO-Code: APKT160424 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.4 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160424-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features APKT 160425 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-Aluminium Facts / Figures: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for APKT 160425 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-CastIron Figures for the tool: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Cast Iron-MetavCUT 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us a sample insert or drawing by post Product features for indexable inserts APKT 160425 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-Stainless Figures for the tool: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Information on technical features for APKT 160425 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160425-Steel Data/ Figures: ISO-Code: APKT160425 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2.5 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160425-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications APKT 160430 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160430-Aluminium ISO-Code: APKT160430 Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160430-Aluminium-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts APKT 160430 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160430-Stainless Facts & Figures: ISO-Code: APKT160430 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160430-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930 Information on technical features for APKT 160430 inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160430-Steel Dataand Figures: ISO-Code: APKT160430 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160430-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product features APKT 160440 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-Aluminium Facts and Figures: ISO-Code: APKT160440 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 4 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930 📧 eMail: info@metav-werkzeuge.com ✔️ WhatsApp: +49 170 2837271 Performance features for APKT 160440 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-CastIron ISO-Code: APKT160440 Usage for: Cast steel Material: cemented carbide Form: parallelogram Usable to the work on: Cast Iron Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 4 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Cast Iron-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Information on technical features indexable inserts APKT 160440 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-Stainless ISO-Code: APKT160440 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 4 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features for APKT 160440 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160440-Steel Data & Figures: ISO-Code: APKT160440 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 4 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160440-Stahl-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by e-mail.► Send us a drawing by email► Send us a sample insert or drawing by post Detail specifications for APKT 160410 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-Steel ISO-Code: APKT160410 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Stahl-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a picture of your insert directly by e-mail.► Send us your drawing by e-mail.► Send us your sample insert or drawing by post. Product characteristics for indexable inserts APKT 160410 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-Aluminium Facts and Figures: ISO-Code: APKT160410 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Performance features for indexable inserts APKT 160410 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-CastIron Figures for the tool: ISO-Code: APKT160410 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1 Features Material: cemented carbide Usage for: Cast steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Cast Iron-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Product specifications for indexable inserts APKT 160410 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160410-Stainless ISO-Code: APKT160410 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 1 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160410-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications for indexable inserts APKT 160416 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160416FR-MA2-Aluminium Data & Figures: ISO-Code: APKT160416 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 1.6 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160416-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271, 📧 eMail: info@metav-werkzeuge.com Detail specifications for inserts APKT 160420 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160420FR-MA3-Aluminium Facts / Figures: ISO-Code: APKT160420 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 2 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160420-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Information on technical features for indexable inserts APKT 160432 from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160432FR-MA2-Aluminium Figures for the tool: ISO-Code: APKT160432 Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 3.2 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160432-Aluminium-MetavCUT 40END
Didn't find the right insert? We can help you!► Send us a photo of your insert directly by email► Send us your drawing directly by e-mail.► Send us your sample insert or drawing directly by post. Design details for APKT 160432 indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160432R-MM1-Stainless ISO-Code: APKT160432 Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160432-Stainless Steel-MetavCUT 40END
Couldn't find the right insert? Don't worry, we're here for you!► Send us a photo of your insert directly by email► Send us a drawing by email► Send us your sample insert or drawing by post. Features APKT 160432 insert from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT160432R-MM1-Steel ISO-Code: APKT160432 Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 3.2 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-160432-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product specifications APKT 1604PD inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDFR-MA-Aluminium Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Specifications APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDFR-MA2-Aluminium Data/ Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Special features Material: cemented carbide Usage for: Aluminium with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Aluminium-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Specifications for APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDFR-MA3-Aluminium ISO-Code: APKT1604PD Usage for: Aluminium Material: cemented carbide Form: parallelogram Usable to the work on: Aluminium Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Aluminium-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product features for indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MF-Stainless Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Not sure whether this tool is suitable for your application? Or are you still missing important technical details? No problem!Contact us - we will be happy to advise you. 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Performance features indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MF-Steel Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
Areyou not sure whether this tool fulfils your requirements? Or do you need additional technical data?No problem - we will be happy to help you 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930 Product characteristics indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MM-Stainless Data/ Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com Specifications indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-MM-Steel Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Special features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
You couldn't find the right insert? Let us help you!► Send us a photo of your insert directly by email► Send us your drawing by e-mail.► Send us your sample insert or drawing directly by post. Features indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-Stainless Data & Figures: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Special features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com, ✔️ WhatsApp: +49 170 2837271 Product details for APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-Steel Facts for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! 📧 eMail: info@metav-werkzeuge.com, ☎️ Phone: +49 2822 7131930, ✔️ WhatsApp: +49 170 2837271 Features for insert APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-X22-Stainless ISO-Code: APKT1604PD Usage for: Stainless steel Material: cemented carbide Form: parallelogram Usable to the work on: Stainless Steel Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or do you need further technical information?No problem - feel free to contact us! ✔️ WhatsApp: +49 170 2837271 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 Product features indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDSR-X22-Steel ISO-Code: APKT1604PD Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END
Unsure whether the tool is the right one? Or are you missing technical data?Just get in touch with us! 📧 eMail: info@metav-werkzeuge.com ☎️ Phone: +49 2822 7131930 ✔️ WhatsApp: +49 170 2837271 Product details APKT 1604PD indexable inserts from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDTR-X22-Stainless Figures for the tool: ISO-Code: APKT1604PD Clearance Angle: 11° Angle: 85° Thickness: 4,76mm Radius: 0 Features Material: cemented carbide Usage for: Stainless steel with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Form: parallelogram Chip Breaker: single-sided Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stainless Steel-MetavCUT 40END
Are you unsure whether the tool is suitable for your application? Or are you still missing technical data?No problem, just contact us!!! ✔️ WhatsApp: +49 170 2837271, ☎️ Phone: +49 2822 7131930, 📧 eMail: info@metav-werkzeuge.com Detail specifications for indexable inserts APKT 1604PD from MetavCUT Brand: MetavCUT Manufacturer Order Number: APKT1604PDTR-X22-Steel ISO-Code: APKT1604PD Usage for: Steel Material: cemented carbide Form: parallelogram Usable to the work on: Stahl Clearance Angle: 11° with hole Hole Style: cylindrical hole + single-sided countersink (40°–60°) Thickness: 4,76mm Radius: 0 Chip Breaker: single-sided Angle: 85° Manufacturer: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; www.metav-shop.de; info@metav-werkzeuge.com 40START indexable-inserts-APKT-1604PD-Stahl-MetavCUT 40END