15000 g Platform Scale With Stainless Steel Indicator, IP65 Dust And Splash Protection, 22 mm LCD - KERN

Take advantage of a lightweight, workshop-ready stand that raises the weighing indicator for clearer readings and flexible installation; compatible with a wide range of KERN scale models and ready to order via Metav Werkzeuge or discussed with our consultants for application advice. KERN BFS-A07 stand — Indicator-unit stand, KERN-compatible The BFS-A07 stand is a compact mounting solution designed to raise weighing indicator units for industrial and workshop scales, making displays easier to read and integrating cleanly with existing KERN equipment. Compact stand for raising indicator units Compatible with KERN UFA, BFB, BFN and BFS Also fits KERN pallet and through-rail scales Lightweight construction approx 2.6 kg Clear readings and dependable positioning for weighing tasks The stand offers stable positioning for indicator units, which improves readability and reduces handling errors during routine weighing operations. Built as a dedicated accessory for scales, this mounting solution ensures the indicator is elevated away from the weighing platform, helping to prevent signal interference and making the display accessible from a comfortable viewing angle. The combination of a compact footprint and robust support simplifies integration into production lines and workshop benches, delivering practical benefits without complex modifications. Practical workshop integration and ergonomic benefit With a focus on convenience, the support stand reduces clutter on the work surface and provides an ergonomic viewing height for operators handling frequent weighings. The lightweight construction allows for repositioning when workflows change, while the compact design maintains a minimal footprint in tight areas. Installation is straightforward when used with the compatible KERN equipment named below, enabling quick set-up in dispatch, goods-inwards or production cells where clear indicator visibility speeds up processes and reduces downtime. Clear compatibility to match existing KERN systems The stand is intended specifically as an accessory for KERN weighing systems, offering compatibility with a range of models so that workshops can standardise on a single mounting solution. By matching the stand to compatible weighing beams, floor scales and pallet models, users gain a consistent mounting approach across different scale types. This targeted compatibility minimises uncertainty when specifying accessories and supports a streamlined workflow in industrial weighing applications. For tailored advice or order placement, contact Metav Werkzeuge in Emmerich — email info@metav-werkzeuge.com or call +49 2822 7131930 to discuss the KERN BFS-A07 stand and its suitability for specific scale setups. Technical data Article number: BFS-A07 Manufacturer: KERN SKU: BFS-A07 GTIN: 4045761111547 Weight: 2.6 kg Origin: CN Facts Weight: 2.6 kg GTIN: 4045761111547 Commodity code: 73269098 ECLASS: 21170601 Compatibility & features Accessory for scales (stands category) For raising weighing indicator / evaluator units Compatible with weighing beams KERN UFA Suitable for floor scales KERN BFB, BFN and BFS Fits pallet scales KERN UFB and UFN and through-rail scale KERN NFB FAQ What scales is this stand compatible with? The stand is compatible with a range of KERN models; compatible types include weighing beams KERN UFA, floor scales KERN BFB/BFN/BFS, pallet scales KERN UFB/UFN and through-rail scale KERN NFB, ensuring broad applicability in industrial weighing setups. Is the stand easy to move around the workshop? Yes. The KERN BFS-A07 stand has a lightweight construction of approximately 2.6 kg, allowing for straightforward repositioning when workflows or station layouts change. What is the primary purpose of the stand? The stand is designed to raise the weighing indicator unit, providing an ergonomic viewing height and reducing interference with the weighing platform for clearer, more reliable readings. Can this stand be used for multiple indicator models? The stand is provided as a universal accessory for the compatible KERN scale families listed above, making it suitable for use with a variety of indicator layouts within those model ranges. Manufacturer: KERN, Origin: CN

Benefit from a stainless-steel, hygienic design combined with low weight and straightforward handling for fast, reliable weighing of loose goods; order the tare pan directly via Metav Werkzeuge or ask our consultants if needed. KERN Tare Pan RFS-A02 — stainless-steel weighing tray for loose items KERN Tare Pan RFS-A02 provides a purpose-built stainless-steel surface for quick, hygienic weighing of loose small parts, fruit and vegetables with compatible bench and laboratory scales. Stainless-steel construction, easy to clean Lightweight and easy handling Designed for loose small parts and produce Accessory for KERN scales and similar systems Faster, more reliable weighing for daily workflows The stainless-steel tray is designed to support efficient weighing tasks in production, retail and workshop environments. Thanks to its hygienic surface and smooth geometry, routine cleaning is quick, reducing machine downtime and maintaining consistent results. The material choice also contributes to weighing accuracy by preventing contamination and reducing offsets that arise from trapped debris. This results in a predictable tare behaviour and fewer repeat measurements, improving throughput on busy benches. Practical handling and compatibility with scale systems This accessory is optimised for integration with bench and counting scales, offering a simple way to extend existing weighing equipment for bulk or loose items. The lightweight construction eases placement and removal, while the shallow profile supports even distribution of small components for stable readings. For workshops and retail counters where speed and repeatability matter, the tray streamlines processes and supports consistent inventory recording. Low-maintenance hygiene for food and small-parts environments Constructed for straightforward maintenance, the tray’s stainless-steel surface is easy to clean and resistant to staining, which is especially beneficial when handling foodstuffs or dusty small parts. The material minimises bacterial harbourage when cleaned correctly and reduces the need for intensive maintenance regimes. Visual inspection is fast, and routine wiping keeps the weighing environment compliant with basic hygiene expectations without specialised tools. For procurement, compatibility checks or technical advice on the KERN tare pan RFS-A02, contact Metav Werkzeuge in Emmerich at info@metav-werkzeuge.com or call +49 2822 7131930 — phone and WhatsApp support available for quick consultation Technical Data Article number: RFS-ACC SKU: RFS-A02 Manufacturer: KERN GTIN: 4045761113787 Net weight: 0.57 kg Origin: CN Customs tariff number: 84239010 eClass: 32040606 Facts Net weight 0.57 kg GTIN 4045761113787 Customs tariff 84239010 eClass 32040606 Special features Stainless-steel tray, easy and hygienic to clean Ideal for weighing loose small parts, fruit, vegetables Accessory for scales, product category: weighing accessories FAQ Is the tray suitable for food use? The stainless-steel surface of the KERN tare pan RFS-A02 is described as easy to clean and hygienic, making it suitable for weighing fruit and vegetables under routine cleaning regimes. Which scales is the tray compatible with? The tray is an accessory for bench and counting scales; it is supplied as the tare pan RFS-A02 for KERN systems and can be used with similar platforms that accept removable trays. How should the tray be cleaned to maintain accuracy? Routine wiping with a mild detergent and drying is recommended to keep the weighing surface free of residues that could affect tare values; the KERN tray’s stainless-steel finish supports straightforward maintenance. What is the net weight of the tray and does it affect scale selection? The tare pan has a net weight of 0.57 kg; this should be considered when selecting a scale with an appropriate capacity and resolution for your weighing tasks. KERN — Manufacturer country: CN

Take advantage of a compact, reliable stand that raises the indicator by 200 mm for improved readability and ergonomic operation; its compatibility with IP-protected KERN SFE platform scales and lightweight construction (approx. 0.59 kg) make it a practical choice for workshop integration — order the stand directly via Metav Werkzeuge or consult our specialists for application advice. Stativ SFE-A01 – Stand for KERN SFE, 200 mm height, lightweight The Stativ SFE-A01 provides a simple, robust mounting solution for KERN SFE platform weighing systems by elevating the indicator unit to enhance visibility and workflow in workshop and industrial settings. Raises display by approx 200 mm Compatible with IP-protected KERN SFE Suitable for 300×240×110–650×500×140 mm plates Lightweight at approx 0.59 kg Improved readability and operator ergonomics Elevating the indicator by 200 mm removes the need for frequent craning or repositioning of components during weighing tasks. The raised bracket offers a clear line of sight to the display, reducing handling time and the risk of reading errors; this contributes directly to productivity gains in routine checks and repetitive measurements. The compact, elevated mount is especially useful where bench space is limited, delivering a practical combination of visibility and space efficiency. Fast integration into existing KERN setups Designed specifically for use with KERN SFE platform scales, the stand accepts models with weighing-plate dimensions from 300×240×110 mm up to 650×500×140 mm, enabling straightforward retrofitting without major alterations to the workbench. The accessory supports secure mounting of the indicator to maintain stable readings during use, preserving the accuracy of the base scale. Clear compatibility and simple installation translate into less downtime and predictable workflow improvements. Workshop-proven reliability and lightweight handling With a weight of approximately 0.59 kg, the stand is easy to handle during installation and relocation while still providing stable support for the indicator unit. Manufactured for integration with IP-rated platform systems, it assists in maintaining an organised, ergonomic workstation that helps technicians focus on measurement tasks rather than equipment adjustments. For operations seeking dependable components that streamline daily procedures, this stand is a low-effort enhancement that improves usability and efficiency. For precise mounting solutions from a trusted partner, request the KERN SFE-A01 stand through Metav Werkzeuge — our consultants in Emmerich will advise on fitment and delivery to ensure a seamless upgrade to existing weighing equipment. Technical data Article number: SFE-A01 Manufacturer: KERN GTIN: 4045761144781 Origin: CN Tariff code: 73269098 eClass: 21170601 Core technical data Weight: 0.59 kg Height: approx. 200 mm Suitable plate sizes: 300×240×110 mm to 650×500×140 mm Special features Compatible with IP-protected platform scales KERN SFE Stand for elevating the indicator unit Lightweight design for simple handling FAQ Is the stand compatible with KERN SFE platform scales? The stand is compatible with IP-protected KERN SFE platform scales and is intended to elevate the indicator unit for improved visibility. What height does the stand provide? The stand provides an elevation of approximately 200 mm to raise the display into a more ergonomic viewing position. Which weighing-plate sizes are supported? Suitable for models with weighing-plate dimensions from 300×240×110 mm up to 650×500×140 mm. How heavy is the stand? The stand weighs approximately 0.59 kg, making it easy to handle during installation. Where is the stand manufactured? The product originates from China (CN) and is supplied under the KERN designation SFE-A01. Manufacturer: KERN — Origin: China — Contact: info@metav-werkzeuge.com | +49 2822 7131930

Take advantage of a compact solution that raises the indicator to a practical working height and simplifies scale integration. With an approximate 400 mm elevation and a lightweight design, this stand improves readability and ergonomics for IP-protected platform scales and can be ordered or specified via Metav Werkzeuge for direct supply to the workstation. KERN SFE-A02 stand – 400 mm elevation for IP-protected platform scales The SFE-A02 stand provides a dedicated upright mount to raise the scale indicator for clearer viewing and safer placement in industrial environments. Height approx. 400 mm for elevated indicator Compatible with IP-protected KERN SFE platform scales Fits platform sizes 400×300 to 650×500 mm Weight approx. 0.81 kg for easy handling Improved workflow through elevated indicator positioning Raising the indicator delivers a measurable improvement in ergonomics and efficiency on the production floor. By placing the display at eye level, the upright mount reduces repetitive bending and enables faster reading of results, which translates into fewer handling errors and a steadier production flow. The 400 mm elevation is designed to coordinate with common bench and trolley heights, making the unit a practical addition where clear visibility of measurements is essential. The compact form supports neat cable routing and keeps the weighing station organised for regular operations. Seamless compatibility with IP-protected platform systems This accessory is engineered specifically for use with IP-protected platform scales from the same product family, allowing simple mechanical integration without modifying the weighing system. The mounting concept accepts platform sizes from 400×300 mm up to 650×500 mm, ensuring a secure fit for a broad range of models. The clear specification of compatibility minimises procurement uncertainty and supports quick selection for retrofit or new installations. Where scale protection and environmental sealing are required, pairing the upright mount with an IP-rated platform preserves the system’s ingress protection characteristics. Practical handling and installation benefits for workshop use The stand’s light overall mass of approximately 0.81 kg assists handling during setup and re‑positioning, while the compact footprint keeps the weighing area accessible. Simple attachment points reduce downtime during fitment and allow maintenance staff to carry out installation without specialised tools. For workshops aiming to centralise procurement and standardise setup, the accessory integrates with existing scale fleets to harmonise operator experience and reduce training needs. Its restrained profile also supports tidy bench layouts where space is at a premium. Reliability and supply from a trusted precision partner Sourcing this mount from an established supplier ensures predictable delivery and consistent quality control for industrial measurement equipment. The association with a recognised brand supports traceability across batches and simplifies parts replacement when necessary. For businesses consolidating suppliers, choosing components that align with established product families helps maintain calibration workflows and operational continuity. Contact Metav Werkzeuge to request the KERN SFE-A02 stand with 400 mm elevation and discuss delivery options direct from our Emmerich facility. Technical data SKU: SFE-A02 GTIN: 4045761151376 Manufacturer: KERN Country of origin: CN Commodity code: 73269098 Numbers / Core technical data Height: approx. 400 mm Weight: approx. 0.81 kg Platform size compatibility: 400×300×130 mm to 650×500×140 mm Designs / Special features Designed for elevating the indicator/display Compatible with IP-protected platform scales in the SFE family Compact footprint for bench and trolley use FAQ Is the stand suitable for IP-rated platform scales? Yes. The stand is compatible with IP-protected platform scales from the KERN SFE family and preserves the intended protection when installed as specified. What platform sizes will fit with this stand? The stand accepts platform sizes from 400×300×130 mm up to 650×500×140 mm, covering common small and mid-sized industrial platforms. How heavy is the unit and how easy is it to move? The upright mount weighs approximately 0.81 kg, which makes handling and repositioning straightforward during routine workshop adjustments. Can the stand be used to improve operator ergonomics? Yes. Elevating the indicator to roughly 400 mm reduces bending and improves readability, which supports faster and more reliable measurement routines. Is the accessory suitable for retrofitting existing scales? The design is intended for integration with KERN SFE platform scales and is suitable for retrofitting compatible models without altering the platform itself. Metav Werkzeuge, Emmerich am Rhein, 📧 info@metav-werkzeuge.com, ☎️ +49 2822 7131930

Take advantage of a height‑adjustable elevation solution combining robust stainless‑steel construction and a massive three‑legged tripod for reliable stability and precise positioning. Order the KERN YKP‑02 directly via Metav Werkzeuge or ask our consultants for advice and delivery from Emmerich. KERN YKP-02 Tripod Stand — height‑adjustable 750–1000 mm, stainless steel The KERN YKP‑02 is a tripod stand designed to raise indicator and evaluator units for workshop and laboratory use, providing stable positioning and broad compatibility with multiple KERN scale series. Height-adjustable 750–1000 mm Robust stainless-steel tripod base Designed for indicator/evaluator units Compatible with multiple KERN series Stable elevation for precise readings A height-adjustable tripod removes guesswork from set‑up: the 750–1000 mm range permits accurate placement of the evaluation unit at the operator’s preferred working height, reducing posture changes and measurement variation. The massive three‑legged base delivers stability on uneven surfaces, which supports repeatable readings and protects sensitive load cells from unwanted lateral forces. This results in fewer rechecks and a smoother inspection workflow. Built for compatibility and workflow efficiency The stand is intended for mounting evaluation units and is compatible with a wide range of KERN series, simplifying procurement and reducing inventory complexity. Its universal mounting capability ensures the tripod integrates with existing weigh‑and‑measure equipment, enabling faster set‑up times and less downtime between jobs. The compatibility aspect therefore contributes directly to improved throughput and predictable production planning. Durable materials for long service life Constructed from stainless steel with a heavy‑duty tripod foot, the stand resists corrosion in workshop environments and sustains repeated handling without loss of function. Where painted steel components are supplied, the finish adds protection against abrasion. The material choice focuses on longevity and low maintenance, translating to reduced total cost of ownership over the product life cycle. Practical handling and application benefits With a net weight of 2.6 kg and a compact footprint, the tripod offers a practical balance between portability and robustness. The design supports simple vertical adjustment while keeping the mounted device secure; this simplifies calibration tasks and routine inspections. For users aiming for reliable positioning of displays and indicators, the stand enables stable visual alignment and safer working practices. Contact Metav Werkzeuge today for tailored advice on integrating the KERN YKP‑02 tripod into existing measurement setups and to arrange prompt delivery from our Emmerich warehouse. Technical data Article number: YKP-02 Manufacturer: KERN SKU: YKP-02 GTIN: 4045761184374 Origin: CN Facts Height range: 750–1000 mm Weight: 2.6 kg HS code (Tariff): 73269098 eCl@ss: 21170601 Special features Stainless steel with massive tripod base Height-adjustable Painted steel option / stainless finish For elevating indicator / evaluator units Compatible with BFB, BXS, BFS, BFA, BBB, BBN, BKN, IFS, IFB, KFE-TM, KXG-TM, KXS-TM, KEN-TM, NFB, NBB, SFE, UFA, UFB, UFC FAQ What is the adjustable height range of the tripod? The KERN YKP‑02 tripod offers a height range of 750–1000 mm, which allows precise positioning of evaluation units at ergonomic working heights. Which materials are used in the construction of the stand? The stand is supplied in stainless steel with a massive three‑legged base; painted steel versions are noted where applicable for increased surface protection. Is the tripod compatible with my KERN evaluation unit? Compatibility is wide: the KERN YKP‑02 is designed to fit numerous KERN series including BFB, BXS, BFS, BFA and others listed in the technical information, ensuring straightforward integration. How heavy is the tripod and what does that mean for handling? The KERN YKP‑02 weighs 2.6 kg, balancing ease of repositioning with sufficient mass for stable mounting in routine workshop and laboratory tasks. Can the stand improve measurement repeatability? Yes. By providing a stable, height‑adjustable support for the evaluation unit, the tripod reduces movement and misalignment, which helps improve repeatability of readings. Manufacturer: KERN; Origin: CN; Contact: info@metav-werkzeuge.com | +49 2822 7131930 | WhatsApp +49 170 2837271

Kern roller modules combine robust construction with quick integration for smoother conveyor weighing. Benefit from a lightweight aluminium profile frame and conductive, ball-bearing rollers that reduce handling time and maintain measurement reliability. Order the roller conveyor attachment directly via Metav Werkzeuge or request a tailored configuration from our specialists. KERN YRO-01 roller conveyor attachment — aluminium profile frame, ball-bearing rollers The KERN YRO-01 roller conveyor attachment converts a platform scale into a fast, flexible weighing station for production and dispatch lines, suitable for integration with standard KERN platform scales. Converts platform scale into weighing station Modular aluminium profile frame for easy cleaning Hot-dip galvanised ball-bearing steel rollers Conductive rollers for static management in dry areas Faster weighing where throughput matters Integrating a dedicated roller conveyor attachment with an existing platform scale transforms intermittent weighing into a continuous, productive step in the workflow. The modular roller module allows goods to be weighed while moving or at fixed stops, which shortens handling cycles and improves line throughput. Compatibility with established KERN platform models (e.g. IFB, IFS, KFP, KXP, SXS) enables direct retrofitting, reducing installation complexity and keeping commissioning time minimal. The result is an immediate efficiency gain and more consistent process timing across production and shipping stations. Robust build that simplifies maintenance A lightweight aluminium profile frame provides structural rigidity without unnecessary bulk, while the modular construction allows individual parts to be removed for cleaning or replacement. The rollers are hot-dip galvanised, ball-bearing steel, offering low rolling resistance and long service life under repeated use. This combination reduces maintenance intervals and downtimes versus ad hoc conveyor attachments, preserving the operational reliability of connected scales and conveyors. The design supports straightforward servicing and component swaps, which is particularly valuable in high-throughput environments. Consistent handling and safe operation The roller set uses conductive rollers and a compact roller spacing of approximately 30 mm, promoting steady transit and preventing product hang-ups on the module. Designed for longitudinal running direction and for use in dry environments, the system helps manage electrostatic effects while ensuring predictable movement across the weighing surface. Supplied as a single conveyor attachment (without scale), the module keeps the weighing interaction transparent: goods are positioned, weighed and forwarded with minimal manual intervention, reducing handling errors and process variability. Simple retrofitting and configurable performance The attachment is supplied to be plugged directly onto compatible platform bases, so the mechanical fit is immediate and intuitive. Its modular architecture supports customised adjustments such as preload and switching tolerance settings to suit specific production requirements, enabling the attachment to be tuned to conveyor speeds and goods characteristics. Assistance with configuration and individual adaptation is available for tailored setups. As a compact accessory, the unit preserves the primary weighing characteristics of the connected scale while delivering the conveyor functionality needed in fast-paced processing lines. For tailored configuration and prompt supply of the KERN YRO-01 roller conveyor attachment, contact Metav Werkzeuge — supply from Emmerich with expert advice and rapid processing via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: YRO-01 Manufacturer: KERN GTIN: 4045761190276 Facts Dimensions: 405 x 305 x 130 mm Weight: 6 kg ECLASS: 36120407 Special features Aluminium profile frame Hot-dip galvanised, ball-bearing steel rollers Conductive rollers Roller spacing approx. 30 mm Longitudinal running direction Suitable for dry environments Delivered as 1 roller conveyor attachment (without scale) Compatible with KERN IFB, IFS, KFP, KXP, SXS platform scales Country of origin: DE Tariff number: 84239010 FAQ Can the roller conveyor attachment be used with existing KERN platform scales? The KERN YRO-01 roller conveyor attachment is designed for direct fit on several KERN platform models such as IFB, IFS, KFP, KXP and SXS, enabling fast retrofitting without major mechanical changes. What maintenance is required for the rollers and frame? The modular aluminium profile frame and hot-dip galvanised, ball-bearing rollers on the KERN YRO-01 permit easy disassembly for cleaning or replacement, reducing maintenance time compared with non-modular solutions. Is the attachment suitable for environments with moisture or liquids? The KERN YRO-01 is specified for use in dry environments; the conductive rollers and materials are selected to manage static and ensure consistent operation under those conditions. Does the module affect weighing accuracy of the connected scale? When fitted correctly on compatible platform bases, the roller conveyor attachment maintains the weighing function of the connected scale while enabling goods to be moved on and off the weighing surface with consistent handling characteristics. What is included in the delivery? Delivery comprises one roller conveyor attachment (without scale), supplied as a modular unit ready for mechanical mounting to compatible KERN platform scales. Manufacturer: KERN; Address: Germany; Contact: via Metav Werkzeuge — info@metav-werkzeuge.com, +49 2822 7131930