Precision angle gauges for reliable right-angle control
Angle gauges and inspection squares provide dependable verification of right-angle geometry and ensure accurate alignment in metalworking assemblies. Used for tasks ranging from rough marking with a machinist's square to high-precision verification with hardened and lapped control angles, these tools prevent fitment errors and functional faults by detecting even minute deviations from 90° and other set angles. For heavy-duty applications such as flange alignment in piping and vessel fabrication, robust flange squares offer stable seating on curved surfaces, while sine bars and adjustable angle gauges enable trigonometrically exact measurements for non‑standard angles. Regular calibration and inspection of leg flatness and wear are essential to maintain measurement integrity.
800x320 Carpenter's Square Stainless Steel, Seamless, Powder-Coated, mm Scale & Marking Holes - Metav IndustryLine
Robust stainless steel construction, a clear millimetre scale with 5 mm scribe holes and a stiff 35 x 1.2 mm profile deliver repeatable layout and long service life; order the square directly via Metav Werkzeuge or ask our consultants for application support. Carpenter's square M214.932 — 800 x 320 mm, stainless, yellow powder-coated (Metav IndustryLine) Carpenter's square M214.932 is a right-angled layout tool for carpentry, joinery and site work, designed for precise marking and durable performance thanks to a millimetre scale and regularly spaced scribe holes. Seamless stainless steel construction Millimetre scale with 5 mm scribe holes Yellow powder-coated for corrosion resistance Stiff 35 x 1.2 mm profile for accurate edges Precision and durability for daily site use The seamless, stainless steel body and yellow powder-coated finish make this layout square resilient against workshop wear and corrosion while keeping a professional appearance. The profiled limb, specified as 35 x 1.2 mm, increases stiffness along the full length so that edges remain straight during repeated use; this reduces flex and ensures reproducible right angles over time. At roughly 0.5 kg, the tool balances rigidity with manageable handling on site. Fast, repeatable marking and measurement A clear millimetre scale combined with scribe holes every 5 mm turns routine layout tasks into quick, repeatable steps: lines can be transferred directly through the holes, eliminating guesswork and improving cycle time on repetitive cuts or joinery marks. The 800 x 320 mm format offers generous reach for framing and panel work while remaining compact enough for one-person handling, so layout and transfer operations become both more accurate and more efficient. A straight choice from a trusted supplier Produced under the Metav IndustryLine label, this right-angled tool delivers workshop-grade reliability for tradespeople and production shops. The M214.932 combines straightforward mechanics with pragmatic corrosion protection to reduce total cost of ownership. Metav’s European distribution and stock in Emmerich support dependable supply and practical aftersales guidance, making the square a sensible selection for routine site and workshop measuring tasks. Request tailored advice from Metav Werkzeuge for the M214.932 carpenter's square and secure delivery from our Emmerich warehouse—call or email our technical team for specification support Technical Data SKU: M214.932 GTIN: 4054469183497 ECLASS: 21170119 Facts Dimensions: 800 x 320 mm Cross-section: 35 x 1.2 mm Weight: 0.5 kg Special features Material: stainless steel, seamless, yellow powder-coated Millimetre scale Scribe holes every 5 mm Seamless construction FAQ What applications is this square best suited to? The M214.932 carpenter's square is designed for carpentry, joinery and general site layout tasks where a durable, easy-to-read right angle and repeatable marking are required. How do the scribe holes improve workflow? Scribe holes every 5 mm on the square allow direct line transfer and quicker marking, reducing setup time and improving consistency compared with freehand marking. Is the finish suitable for outdoor use? The yellow powder-coated surface provides an extra layer of corrosion resistance; combined with the stainless steel body, the tool is well suited to workshops and temporary outdoor use. Does the square offer sufficient stiffness for framing work? The 35 x 1.2 mm profile increases longitudinal stiffness, helping to maintain straight edges for reproducible 90° checks and layout tasks across the 800 mm limb. Which SKU should be ordered for this model? Order the M214.932 carpenter's square from Metav IndustryLine for the 800 x 320 mm, powder-coated stainless version. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x320 mm Carpenter's Square With 35x1.2 mm Section, Stainless Steel, Perforated Every 5 mm, Metric Scale - Metav IndustryLine
Take advantage of the combination of seamless stainless steel construction, a precise millimetre scale and evenly spaced perforations for fast layout work — all in a robust 800 × 320 mm profile. Order this framing square directly via Metav Werkzeuge or contact our consultants for procurement advice. M214.922 Carpenter's framing square — 800 × 320 mm, seamless stainless, perforated 5 mm (Metav IndustryLine) A Carpenter's framing square M214.922 designed for durable layout and marking tasks in joinery, timber framing and general workshop use with an integrated mm scale and perforations every 5 mm Seamless stainless steel construction Perforated layout holes at 5 mm centres Integrated millimetre scale for precise marking Robust 35 × 1.2 mm cross-section profile Suitably sized 800 × 320 mm framing square Built for durable, repeatable layout and long service life The square is manufactured from seamless stainless steel, delivering corrosion resistance and consistent stiffness across the entire length. The 35 × 1.2 mm cross-sectional profile increases torsional rigidity, which reduces flex during transfer marking and ensures that right angles remain true under repeated use. As a direct benefit, less reworking is needed on site, improving throughput and lowering the risk of alignment errors on assemblies. Precise marking and rapid transfer between workpieces An integrated millimetre scale combined with perforated holes at 5 mm spacing streamlines repetitive layout tasks: holes act as guides for pencils, awls and punch marks, enabling fast, repeatable transfers without constant re‑measuring. The regular perforation grid supports both parallel marking and stepped layout operations, making the tool well suited to stair stringers, rafter layout and repeated joinery patterns where speed and consistency matter. Workshop-ready dimensions and practical handling With overall dimensions of 800 × 320 mm, the tool offers an extended reach for framing components while remaining manageable for single-person handling and storage. The square weighs approximately 0.5 kg, balancing portability with the necessary mass to lie flat during marking. The design simplifies procurement and inventory control: the tool is supplied under SKU M214.922 and carries a GTIN for catalogue ordering, so integration into purchasing systems is straightforward. For corrosion‑resistant durability and reliable layout performance choose the Metav IndustryLine M214.922 — contact Metav Werkzeuge for ordering or technical advice at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.922 GTIN: 4054469183459 Weight: 0.5 kg Manufacturer: Metav IndustryLine Numbers / Core technical data Overall dimensions: 800 × 320 mm Cross-section: 35 × 1.2 mm Hole spacing: 5 mm centres Scale: millimetre graduation Designs / Special features Seamless stainless steel material Perforated layout holes every 5 mm Integrated mm scale for direct marking Suitable for carpentry and workshop layout FAQ What material is the framing square made from? The M214.922 is manufactured from seamless stainless steel, which gives corrosion resistance and long service life for workshop and on‑site use. How closely spaced are the perforations and what are they for? Perforations are spaced at 5 mm centres to serve as guides for pencil or awl marks, enabling fast, repeatable layout and transfer marking. Is the square suitable for heavy timber framing? Yes; the 800 × 320 mm format and the 35 × 1.2 mm profile provide the stiffness required for common framing and joinery tasks while remaining easy to handle. Can the tool be ordered through procurement systems? The Metav IndustryLine framing square is listed under SKU M214.922 and GTIN 4054469183459, facilitating catalogue ordering and inventory management. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
800x430 mm Engineer's Square With Stop, Galvanised Special Steel Werksnorm - Metav IndustryLine
Take advantage of a robust galvanised special-steel construction, an 800 x 430 mm measuring face and an integrated stop for repeatable layout work; this combination supports reliable, long-term workshop use. Order the square directly via Metav Werkzeuge or contact our consultants for application advice. M214.532 Fitter's Square (800 x 430 mm) – Galvanised with Stop by Metav IndustryLine A sturdy M214.532 fitter's square designed for heavy-duty layout, alignment and marking in metalworking and fabrication environments. Galvanised special-steel construction Large 800 x 430 mm measuring face Integrated stop for repeatable marking Workshop-standard build quality Precise layout and durable construction for repetitive tasks The square is built from galvanised special steel, offering corrosion resistance and a stable measuring face that withstands everyday workshop handling. The 800 x 430 mm format provides a generous reach for aligning plates, frames and larger components while keeping the tool manageable at 3.2 kg. The galvanised finish reduces surface corrosion, which helps maintain straightness and visual reference over time. For production settings where repeatability matters, this design reduces the need for re-adjustment and supports quicker set-up. Repeatable marking and faster workflow with an integrated stop An integrated stop enables consistent, repeatable marking and positioning without improvised jigs, which speeds up layout tasks and reduces human error. The stop simplifies tasks such as scribing multiple identical parts or squaring workpieces prior to welding and assembly. Together with the square’s rigid profile, the stop supports accurate right‑angle layout and contributes to a smoother workflow—especially useful when several identical operations must be completed in sequence. Practical features that suit workshop routines Designed to the maker’s internal standard, this square focuses on practical durability and ease of use. The item's workshop-standard construction tolerates routine bumps and knocks, while the chosen dimensions balance reach with user control. The product’s weight and proportions make it suitable for single-person handling across benches and machines, and the galvanised surface eases maintenance by resisting rust in demanding shop environments. Choose Metav IndustryLine's robust 800 x 430 mm fitter's square for dependable layout work—contact Metav Werkzeuge for technical advice and order details. Technical data Article number: M214.532 GTIN: 4054469109107 Commodity code: 90178090 Facts Dimensions: 800 x 430 mm Weight: 3.2 kg Standard: Werksnorm Special features Material: Spezialstahl, verzinkt Feature: mit Anschlag Category: Winkel FAQ What materials is this square suitable for? The M214.532 fitter's square from Metav IndustryLine is made of galvanised special steel and is suitable for general metalworking layout on steels and similar workshop materials. Does the galvanised finish prevent corrosion completely? The galvanised finish on the M214.532 provides improved corrosion resistance compared with raw steel, helping to preserve the reference surfaces under typical workshop conditions; regular cleaning and drying are still recommended. How does the integrated stop improve accuracy? The integrated stop on the square fixes workpieces consistently at the same datum, enabling repeatable scribing and alignment that reduces variation between identical parts. Is this square suitable for use at a welding bench? Yes, the robust construction and galvanised coating make the square appropriate for layout and alignment tasks commonly performed at welding benches and fabrication stations. Can the square be used for both inside and outside layout tasks? The profile and stop are optimised for external layout and edge alignment; internal referencing is possible depending on the geometry of the component and the operation. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80cm Electronic Angle Gauge TECH 700 DA 0-270° Measurement Range, 3in1 - STABILA
Take advantage of the combination of broad measuring range, long-reach arms and versatile three-in-one operation for reliable alignment and fast setup on the workshop floor; order the TECH 700 DA directly via Metav Werkzeuge or consult our specialists for tailored advice. TECH 700 DA Electronic angle gauge by STABILA — 0–270° range, 80 cm arms The TECH 700 DA is an electronic angle gauge intended for precise angular measurement across mechanical, installation and maintenance tasks, combining an extended reach with a broad measuring range for flexible workshop and on-site use 0–270° measuring range 80 cm long arms for extended reach 3‑in‑1 operation modes Robust STABILA build quality Precise angle control for industrial tasks The instrument delivers a 0–270° measuring span that accommodates a wide variety of angular layouts encountered in fabrication and installation. With 80 cm arms, the gauge reaches across larger fittings and assemblies, reducing the need for additional fixtures. The electronic measuring principle provides a clear reading of the angle, while the nominal three-in-one design reduces tool changes and supports efficient alignment workflows. This combination of reach and range translates into fewer set-ups and shorter cycle times, which is especially valuable in repetitive production or installation sequences. Versatility that shortens setup time Designed as a multifunction instrument, the 3in1 execution integrates several measuring modes into a single device, enabling rapid transitions between tasks without swapping tools. This versatility supports streamlined processes: fewer interruptions, simplified tool management and a reduced likelihood of measurement errors caused by transferring reference marks. For workshops and service engineers aiming to improve throughput, the integrated approach offers clear time-savings and a smaller tool inventory while maintaining measurement consistency across jobs. Durable design for everyday use Built under the STABILA name, the gauge combines practical ergonomics with jobsite resilience. The extended arms and electronic measurement capability are arranged to withstand routine handling while preserving precision. The result is a dependable tool that supports repeated alignment and angle checks over long periods, helping maintain production quality. Where robustness and consistent results matter, this electronic angle gauge brings a pragmatic balance of reach, range and operational flexibility to standard workshop and maintenance routines. Contact Metav Werkzeuge for supply of the STABILA TECH 700 DA and expert guidance from Emmerich on integrating the gauge into existing measurement procedures Technical data Article number: 4000857167NW Type: TECH 700 DA Product: Electronic angle gauge Manufacturer: STABILA Execution: 3in1 UID: 4000857167NW Facts Measuring range: 0–270° Arm length: 80 cm Packaging unit: 1 Special features Electronic measurement Three-in-one operation modes Long-reach arms (80 cm) Robust STABILA construction FAQ What measuring range does the gauge offer? The TECH 700 DA provides a measuring range of 0–270°, suitable for most general alignment and installation tasks. What does the 3in1 execution mean for workflow? The three-in-one execution in the TECH 700 DA combines multiple measuring modes in a single instrument, reducing tool changes and accelerating setup procedures. Is the instrument suitable for larger assemblies? Yes, the 80 cm arms give the gauge extended reach, allowing measurements across larger assemblies without additional fixtures. Which brand manufactures this electronic angle gauge? STABILA manufactures the TECH 700 DA electronic angle gauge, a product designed for robust use in workshops and on-site operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
80mm Protractor Angle Measure 120mm Arm, Precision Steel - TECWERK
Take advantage of the combination of a graduated arc Ø 80 mm and 120 mm arms for precise, compact angle checks in the workshop; order the item directly via Metav Werkzeuge or ask our consultants if clarification is required. TECWERK Angle Protractor — 80 mm arc, 120 mm arms The TECWERK Angle Protractor is a compact measuring tool designed for reliable angle checks in mechanical workshops and general metalworking applications. Graduated arc 80 mm for precise readings 120 mm arms for versatile measuring reach Compact format for easy storage Clear scale for straightforward angle checks Precise readings from a clearly graduated arc The large graduated arc with an effective diameter of 80 mm improves visual resolution compared with smaller protractors, which supports more reliable angle measurement during setup and inspection. The gently curved scale facilitates alignment with datum edges and reduces parallax when reading values. For tasks that require repeatable checks, the combination of a defined arc and stable arms helps establish a consistent measuring routine, lowering the time spent on re-measurement and contributing to smoother workshop workflows. Practical reach and straightforward handling for workshop tasks Equipped with 120 mm arms, the device reaches across common components while remaining compact enough for bench use and toolboxes. The arms provide sufficient lever for transferring angular settings or marking workpieces without requiring larger layout tools. A clear scale layout simplifies interpretation of degrees and basic angular relationships; when used with standard marking and scribing practices, this format speeds up setup and reduces the likelihood of alignment errors that interrupt production. Compact design that fits into everyday metrology Its compact format makes the tool a practical option for both fixed benches and mobile inspection kits, supporting quick spot checks and routine verifications on the shop floor. The simple mechanical design minimises points of failure and allows straightforward visual inspection of the scale and arms before use. For organisations seeking affordable, purpose-made measuring aids, this protractor offers a balance of precision and portability that complements broader metrology toolsets and workshop equipment. Contact Metav Werkzeuge for availability of the TECWERK Angle Protractor (SKU 2000858560NW) or speak with our consultants at info@metav-werkzeuge.com or +49 2822 7131930 to ensure the specification meets the application requirements Technical Data Article number: 2000858560NW UID: 2000858560NW Brand: TECWERK Data Graduated arc diameter: 80 mm Arm length: 120 mm Packaging unit: 1 Special features Product type: Angle protractor Label: Winkelmesser Gradbogen-D.80mm Schenkel-L.120mm TECWERK Compact format suitable for workshop use FAQ What is the graduated arc diameter? The graduated arc has a diameter of 80 mm, which improves visual resolution for angle readings. How long are the arms and what do they allow? The arms measure 120 mm in length, giving sufficient reach for marking and transferring angles on typical workshop components. Which SKU identifies this protractor? This item is listed under SKU 2000858560NW and marketed as the TECWERK Angle Protractor. Is the scale easy to read for repetitive checks? The protractor features a clear scale and a pronounced arc, designed to support repeatable visual readings during routine checks. For which workshop tasks is this tool suitable? The compact format and combination of arc and arm length make the tool suitable for general angle checking, marking and basic alignment tasks in metalworking and mechanical maintenance. Manufacturer / Responsible: NORDWEST Handel AG, Robert-Schuman-Straße 17, 44263 Dortmund
80x60cm Angle Measuring Device 0–270° Range Precision Reading, Durable Construction - STABILA
Take advantage of the combination of a 0–270° measuring range, long 80 x 60 cm arms and STABILA’s proven layout reliability for faster, more accurate alignment tasks; order the angle gauge directly via Metav Werkzeuge or consult Metav’s technical advisers for assistance. STABILA WINKELSTAR Angle gauge — 0–270° range, 80 x 60 cm arms The WINKELSTAR is a robust angle measuring device designed for precise alignment and layout work across workshop, site and fabrication applications. Wide 0–270° measuring range Long arms 80 x 60 cm for large layouts Reliable layout and alignment accuracy Precise angle control for efficient layout work The angle gauge delivers a clear 0–270° scale that supports a wide range of layout tasks, from setting compound angles to transferring measured values across large components. Thanks to its extended 80 x 60 cm arms, the instrument reduces the need for repeated repositioning, which improves repeatability and shortens setup time. The clear scale and stable legs enable consistent readings, translating technical accuracy into fewer adjustments and faster progress on production and assembly tasks. Designed for practical use in demanding environments Built with workshop and site use in mind, the tool combines a straightforward mechanical design with practical handling properties. The long arms provide reach for large-format panels and structural members while maintaining a compact folded footprint for storage. This balance of reach and manageability supports safer handling during layout operations and contributes to reliable alignment results on timber, sheet material and structural steel tasks where dimensional control is essential. Streamlined work processes and professional results Integrating the angle gauge into routine workflows reduces measurement steps and supports predictable outcomes when setting jigs, marking saw lines or checking installed elements. The instrument’s straightforward indication system assists fast decision making and helps maintain production rhythm in both small workshops and larger fabrication environments. For complex requirements or confirmation of compatibility with specific tasks, Metav Werkzeuge’s technical team provides supplementary information and measurement guidance. Contact Metav Werkzeuge for tailored advice on the STABILA WINKELSTAR angle gauge and to arrange procurement or technical consultation at +49 2822 7131930 or info@metav-werkzeuge.com Technical data Article number: 4000857620NW Label: Winkelmessgerät WINKELSTAR Messber.0-270Grad Schenkel-L.80x60cm BMI Manufacturer: STABILA Product type: Winkelmessgerät SKU: 4000857620NW Core specifications Measuring range: 0–270° Arm length: 80 x 60 cm Packaging unit: 1 Addition/reference: 0-270: 4000 857 630 Features & identification Product name: WINKELSTAR Brand: STABILA Typ: WINKELSTAR UID: 4000857620NW FAQ What measuring range does the tool cover? The WINKELSTAR provides a 0–270° measuring range, enabling versatile angle measurement and transfer across most workshop and site tasks. Are the arms suitable for large-format layout work? With arms of 80 x 60 cm, the gauge is intended for larger layouts and marking operations where extended reach and stable support are required. Which product is referenced by SKU 4000857620NW? SKU 4000857620NW identifies the STABILA WINKELSTAR angle gauge (Winkelmessgerät) with the 0–270° range and 80 x 60 cm arms. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Schreinerwinkel mit Wasserwaage und Anschlag
Technische Daten: Hersteller: Metav IndustryLine Bezeichnung: Schreinerwinkel mit Wasserwaage und Anschlag Material: Aluminium Abmessung: 150x100 bis 600x180 Anschlag: 23x10 - 34x12 Besonderheit: mit mm-Skalierung Gewicht: 0,1 kg bis 0,4 kg Die technischen Daten beziehen sich auf alle Varianten und können je nach Ausführung variieren.
Ensure right angles every time with precision angle gauges
Angle measurement is decisive in metalworking, where even the smallest deviation from a 90° geometry can cause assembly errors or functional faults. The category covers both fixed verification tools and variable measuring instruments, presented here as angle gauges, with common synonyms control squares and sine bars used throughout.
Where and how these tools make the difference on the shop floor
For basic layout and rough alignment, the engineer’s square (a simple flat or bench square) serves as the workshop baseline; it is useful for marking and quick checks but not intended for precision components. When higher accuracy is required, control squares with hardened and lapped faces are used; they are produced in accuracy classes referenced by DIN 875 and designed for the light gap method, which reveals form errors by inspecting the gap between gauge and workpiece under illumination. In pipeline and vessel fabrication, the flange square provides a robust contact geometry to align flanged faces to pipe axes and to withstand high mechanical loading. For angles other than 90°, a sine bar enables trigonometrical determination by using end measures, achieving resolutions into the seconds of arc when set up correctly. Regular calibration and checks for wear and flatness of the legs are essential, since a rounded or damaged leg will distort results.
Practical advantages that reduce rework and speed production
- Reduced fitting errors through repeatable reference geometry using control squares.
- Clear detection of form errors with the light gap method (fast visual indication).
- Durable contact surfaces thanks to hardened and lapped faces, extending service life.
- Accurate non-90° measurement via sine bar setups, enabling fine angular adjustments.
- Stable alignment of flanged components with purpose-built flange squares, lowering assembly time.
Why Metav is the reliable partner for precision angle measurement
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of know-how with a comprehensive range for industry, craft and trade; over 48,000 customers trust this quality filter based in Emmerich. With a broad assortment and consistent supply, Metav simplifies procurement and ensures a dependable source for angle gauges, calibration accessories and workshop standards.
Quick summary
Accurate angle gauges — from basic engineer’s squares to high-precision control squares and sine bars — prevent costly fit problems and support reliable, repeatable manufacture. Choose tools matched to the required accuracy class and maintain them regularly to keep measurement integrity.
FAQ
What is the difference between an engineer’s square and a control square?
An engineer’s square is a workshop baseline for marking and rough checks, while a control square features hardened and lapped faces and is manufactured to tighter tolerances (per DIN 875) for inspection and detection of form errors.
How does the light gap method work for checking right angles?
The light gap method places the workpiece against a control square; uneven gaps visible under a light source indicate deviations from perpendicularity, providing an immediate visual assessment of form errors.
When should I use a sine bar instead of a fixed angle gauge?
Use a sine bar when you need precise angles other than 90°. By stacking end measures you set the desired angle trigonometrically, achieving much finer resolution than most fixed gauges allow.
How often should angle gauges be checked for wear?
Regular inspection of flatness and leg condition is mandatory; any rounding or damage to the legs can significantly falsify measurements, so schedule checks according to usage intensity and your quality control procedures.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com