Precision angle gauges for reliable right-angle control
Angle gauges and inspection squares provide dependable verification of right-angle geometry and ensure accurate alignment in metalworking assemblies. Used for tasks ranging from rough marking with a machinist's square to high-precision verification with hardened and lapped control angles, these tools prevent fitment errors and functional faults by detecting even minute deviations from 90° and other set angles. For heavy-duty applications such as flange alignment in piping and vessel fabrication, robust flange squares offer stable seating on curved surfaces, while sine bars and adjustable angle gauges enable trigonometrically exact measurements for non‑standard angles. Regular calibration and inspection of leg flatness and wear are essential to maintain measurement integrity.
100 x 500 mm Angle Column 90° Ground Base and Mantle, Accuracy 0.005 mm - Metav IndustryLine
Benefit from the combination of 0.005 mm accuracy, a hardened special-steel construction and ground reference faces for reproducible right-angle checks. Order the measuring column directly via Metav Werkzeuge or ask our consultants if needed. Measuring column 90° — precision right-angle reference, 100 x 500 mm, 0.005 mm accuracy (Metav IndustryLine) Measuring column 90° engineered as a hardened steel right-angle reference for inspection benches and precision assembly tasks in industrial metrology Hardened special-steel construction Ground base and side faces 0.005 mm accuracy for fine calibration Solid 18 kg mass for stability Accuracy that stabilises inspection outcomes The column delivers a declared accuracy of 0.005 mm, making it suitable for demanding squareness checks and alignment tasks in quality control and jig inspection. Such a tolerance class ensures that angular deviations remain below the threshold relevant for precision assemblies. The specification is expressed as a measurable limit that supports traceable decisions in testing procedures, reducing uncertainty when establishing reference planes or verifying machined faces. Robust build for repeatable setups Constructed from hardened special steel and finished with ground base and mantle surfaces, the component provides a flat, wear-resistant contact geometry that promotes repeatable positioning. The substantial 18 kg mass improves stability during manual handling and fixturing, so measurements are less affected by incidental movement. The rectified faces serve both as datum planes and bearing surfaces for measuring instruments or gauges, simplifying fixture design and speeding up inspection cycles. Practical deployment on the metrology bench With dimensions 100 x 500 mm, the column combines reach with stiffness for routine workshop use and inspection fixtures. The unit functions as a portable right-angle reference for squareness, layout and comparative measurements and integrates readily with height gauges, surface plates and optical comparators. Traceable performance, clear numeric specification and robust finishing contribute to lower re-measurement rates and a more efficient inspection workflow when the column M214.624 is employed alongside standard metrology equipment. Choose the Metav IndustryLine measuring column for dependable right-angle references; contact Metav Werkzeuge in Emmerich for application advice, ordering and supply from the European quality filter at Parkring 45 Technical data Article number: M214.624 GTIN: 4054469183817 Manufacturer: Metav IndustryLine Core data Accuracy: 0.005 mm Dimensions: 100 x 500 mm Weight: 18 kg Special features Material: Special steel, hardened Surfaces: ground base and mantle faces Function: 90° right-angle reference Category: Angle (Winkel) FAQ What level of squareness can be expected from this column? The column provides a declared accuracy of 0.005 mm, suitable for high-precision squareness checks and reference applications where tight angular control is required. Is the surface finish suitable for direct contact with gauges? Yes; the base and mantle surfaces are ground, offering flat, wear-resistant contact faces appropriate for direct use with height gauges and fixture elements. Which materials is the column intended to reference or support? The column is a reference artefact and is compatible with a broad range of workpieces; its hardened special-steel construction ensures durability when used against typical inspection accessories. How does the mass of the column affect measurement stability? The 18 kg mass increases stability on inspection benches and reduces susceptibility to accidental movement, improving repeatability during manual setups. Can the column be integrated into existing inspection rigs? The 100 x 500 mm format and rectified faces allow straightforward integration with surface plates, height gauges and fixture systems; the unit is intended as a portable right-angle reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 x 70 mm Carpenter's Square Flat Zinc Plated, Werk Standard - Metav IndustryLine
Take advantage of the compact 100 × 70 mm geometry together with zinc‑plated special steel for reliable alignment and long service life in light workshop layout tasks. Order the part directly via Metav Werkzeuge or consult our advisers for application guidance. Metav IndustryLine Engineer's square M214.503 – 100 × 70 mm, flat zinc‑plated Metav IndustryLine Engineer's square M214.503 is a compact, flat zinc‑plated angle designed for basic alignment, marking and light workshop layout operations. Flat zinc‑plated finish for corrosion resistance Precision 100 × 70 mm geometry for layout tasks Made from special steel for workshop durability Lightweight 0.1 kg for easy handling Consistent geometry for accurate layout and marking The flat, right‑angle design delivers a stable reference for common shop tasks. With a 100 × 70 mm leg combination and a flat zinc‑plated surface, the tool provides a clear contact line when used for scribing or checking squareness. The use of special steel ensures that the edge geometry remains true under typical workshop stresses; this yields repeatable alignment and marking results, which reduces rework and helps keep production flow efficient. The compact dimensions make the angle particularly suited to confined setups while still offering the necessary stiffness for everyday metalworking tasks. Easy to handle and integrate into daily workflows A simple, lightweight construction supports quick handling and frequent use without tiring the operator. At approximately 0.1 kg, the angle is easy to position and manoeuvre for marking, checking edges or setting up fixtures. The zinc‑plated finish minimises visible corrosion, keeping reference faces usable for longer and reducing maintenance intervals. Delivered to workshop standard (Werksnorm), the design prioritises functional robustness over unnecessary complexity, which keeps operation straightforward for machinists, metalworkers and fitters who need a reliable go‑to square for routine layout work. Built for dependable service in workshop environments Manufactured with practical durability in mind, the tool is intended for repetitive layout, marking and simple alignment duties. The flat profile aids contact on both workpiece faces and small assemblies, while the factory standard production tolerances ensure consistent performance across units. Backed by Metav’s quality filter in Emmerich, the item benefits from a supply chain focused on dependable delivery and product consistency, making it a pragmatic choice for workshops that value straightforward, long‑lasting hand tools. Choose Metav IndustryLine’s compact engineer’s square M214.503 for dependable workshop layout — contact Metav Werkzeuge for application guidance at info@metav-werkzeuge.com or call +49 2822 7131930 Technical data Article number: M214.503 GTIN: 4054469108902 ECLASS: 21170129 Tariff number: 90178090 Facts Weight: 0.1 kg Dimensions: 100 × 70 mm Material designation: Special steel, zinc‑plated Special features Flat design Factory standard (Werksnorm) Compact workshop angle FAQ What workshop tasks is this angle suited for? This engineer's square M214.503 is suitable for basic alignment, marking and light layout operations in metalworking and general workshop use. Is the surface protected against corrosion? Yes, the zinc‑plated finish on the M214.503 provides corrosion resistance that helps maintain usable reference faces over time. What material is the angle made from? The square is manufactured from special steel with a zinc‑plated coating to combine durability with surface protection. How compact is the tool for tight applications? With a 100 × 70 mm leg configuration and lightweight construction, the angle is intended for confined setups and easy handling in routine tasks. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 x 70 mm Hair Square Flat Hardened Measuring Edge Rustproof - Metav IndustryLine
Rely on Grade 00 accuracy and a hardened measuring edge for repeatable 90° checks; the flat profile ensures stable seating during inspection. Delivered in a protective transport case, this hairline square combines robustness with fine metrology — order via Metav Werkzeuge or consult our specialists for application advice. Hairline square 100 x 70 mm — precision Grade 00, stainless (Metav IndustryLine) The hairline square 100 x 70 mm is a compact, flat angle gauge for precise 90° verification and layout in inspection and workshop environments. Grade 00 accuracy to DIN 875 Hardened measuring edge, matt chrome finish Flat profile for stable seating during checks Supplied in a protective transport case Precise right-angle checks with traceable workmanship A precision square in Grade 00 provides the tolerance stability required for inspection benches and assembly jigs. The hardened measuring edge, combined with a stainless steel substrate and matt chrome plating, reduces wear and preserves the reference surface over repeated use. This construction translates into consistent results when verifying squareness on machined faces or setting up fixtures, reducing rework and process uncertainty. Robust materials for everyday workshop use The compact, flat design keeps the centre of gravity low and prevents rocking when placed against a reference surface, improving repeatability during manual checks. The use of stainless steel means the tool resists corrosion in workshop environments, while the hardened edge maintains straightness under normal handling. These attributes ensure a long service life and stable performance in production and maintenance tasks. Practical handling and protection With a low mass and a compact footprint, the instrument is easy to position and to store without occupying valuable bench space. Delivery in a protective transport case helps preserve the measuring faces during transit and storage, so the square arrives in ready-to-use condition. For bench use, the flat profile provides a reliable seating surface for quick go/no-go checks and layout work. Suitable applications and added value for quality control This hairline square is designed for use in inspection, setup and routine quality checks where a verified 90° reference is required. The tool is well suited to workshops, maintenance departments and small series production where robust, repeatable angle checks support efficient workflows. Its specification aligns with established metrology standards, offering a dependable reference without unnecessary complexity. Choose the Metav IndustryLine hairline square for enduring precision and workshop resilience — contact Metav Werkzeuge in Emmerich for tailored advice at info@metav-werkzeuge.com or by phone on +49 2822 7131930. Technical data Article number: M214.004 GTIN: 4054469105987 Dimensions: 100 x 70 mm Weight: 0.2 kg Material: stainless steel, matt chrome-plated with hardened measuring edge Standard: DIN 875/00 Tariff number: 90178090 Facts Grade: 00 (DIN 875) Flat profile for stable seating Compact size for bench and inspection use Delivered in transport case Special features Hardened measuring edge Corrosion-resistant stainless construction Matt chrome finish to reduce glare Flat design for repeatable placement Suitable for layout and 90° verification FAQ What tolerance class does this square meet? The hairline square meets Grade 00 in accordance with DIN 875, providing a high-precision reference for 90° verification. Is the measuring edge durable for workshop conditions? Yes. The hardened measuring edge and matt chrome-plated stainless steel body ensure resistance to wear and corrosion under normal workshop use. Does the instrument include protective packaging for transport? The square is supplied in a protective transport case to safeguard the measuring faces during storage and transit. Which tasks is this square best suited for? It is ideal for inspection, fixture setup and routine squareness checks on machined components in production and maintenance environments. What is the product identifier for ordering or reference? Reference the Metav IndustryLine hairline square, SKU M214.004, when enquiring or ordering. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 x 70 mm Hair Square Gauge Class 00 Blackened Hardened Tool Steel, DIN 875/00 - Metav IndustryLine
Take advantage of a DIN 875 Class 00 geometry tool that combines compact dimensions and a hardened, blackened hair measuring edge for repeatable right-angle checks. Order directly via Metav Werkzeuge or consult our specialists for integration into precision inspection routines. Hairline square 100 x 70 mm – Precision angle gauge, DIN 875 Class 00 (Metav IndustryLine) Hairline square 100 x 70 mm is a compact precision angle gauge designed for fine workshop and inspection work, providing a durable tool steel construction and a hair measuring edge suitable for high‑accuracy right‑angle verification. Precision to DIN 875 Class 00 Hardened, blackened hair measuring edge Compact format 100 x 70 mm Delivered in transport case Trusted accuracy for routine right‑angle checks This compact angle gauge delivers precision consistent with DIN 875/00, making it suitable for quality control stations and toolroom inspection benches where reproducibility is essential. The combination of the short blade and robust body reduces torsion and helps maintain alignment during repeated contact measurements. The hardened and blackened hair measuring edge resists wear and minimises glare under bright inspection lighting, which preserves the nominal geometry over prolonged use and reduces the need for frequent replacement. Practical benefits for workshop and inspection applications The small footprint of the 100 x 70 mm format offers efficient handling for frequent checks on small assemblies, jigs and machined faces while ensuring a stable reference surface. The tool steel construction gives a balance of stiffness and impact resistance; this supports consistent contact points and lowers measurement scatter. Supplied in a protective transport case, the instrument remains protected during storage and transit, which contributes to long service life and keeps calibration intervals predictable. Integration into quality processes and documentation The product is suitable as a fixed reference in routine inspection procedures or as a portable verification tool for assembly stations. Labels and standards compliance simplify documentation for audits and inspection records, and the clear dimensional specification reduces misinterpretation during procurement and inventory. The compact geometry supports ergonomic handling for operators performing repeated angle verifications, improving throughput without sacrificing metrological reliability. For precision right‑angle work, rely on the Metav IndustryLine hairline square and contact Metav Werkzeuge for ordering or application advice; the team in Emmerich can advise on workshop integration and delivery options. Technical data SKU: M214.134 GTIN: 4054469106793 Standard: DIN 875/00 Material: tool steel with hardened, blackened hair measuring edge Delivery: supplied in a transport case Facts Measuring size: 100 x 70 mm Tariff number: 90178090 ECLASS: 21170127 Special features Class 00 accuracy to DIN 875 Hair measuring edge, hardened and blackened Compact, low‑torsion design for repeated use Supplied for transport protection FAQ What accuracy can be expected from this hairline square? The hairline square conforms to DIN 875 Class 00, providing the high geometrical accuracy associated with that class for routine angle checks and inspection tasks. Is the measuring edge durable for workshop use? Yes, the hair measuring edge is made from hardened tool steel and blackened to resist wear and reduce reflection, which preserves the reference quality under normal workshop conditions. Can this square be used for portable inspections? The compact 100 x 70 mm format and supplied transport case make it suitable for portable inspection work as well as fixed bench verification. Which applications suit this Metav IndustryLine angle gauge? Typical uses include toolroom right‑angle verification, jig and fixture checks, small assembly inspection and quality control processes requiring a compact, repeatable reference. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 x 70 mm Inspection Square Flat, DIN 875/1 Normal Steel - Metav IndustryLine
High-stability right-angle checks combined with DIN 875/1 conformity make this control square a dependable choice for workshop inspection and setup. The 100 x 70 mm compact footprint and flat profile allow rapid alignment in confined spaces while the normal steel construction ensures long-term wear resistance. Order the tool directly via Metav Werkzeuge or ask our consultants for specification advice. Inspection square 100 x 70 mm (DIN 875/1), normal steel — Metav IndustryLine A Inspection square 100 x 70 mm designed as a compact control instrument for quick right-angle verification in machine shops, toolrooms and quality-control benches. DIN 875/1 standard accuracy Compact 100 x 70 mm footprint Normal steel construction Flat profile for easy reference Reliable right-angle reference for quality control Manufactured to DIN 875/1, this inspection square serves as a reproducible reference for right-angle checks and alignment work. The standard ensures compatibility with typical workshop tolerances and supports repeatable set-ups on fixtures and component interfaces. The compact 100 x 70 mm format minimises obstruction at the workface and permits fast visual and tactile verification of squareness, reducing machine downtime and accelerating inspection loops. Compact design that supports efficient set-up The short legs and flat geometry make the instrument easy to position against machine tables, gauges or mating faces; the compact profile favours one-handed handling in confined areas. Constructed from normal steel, the device combines sufficient stiffness with impact resistance for routine shop use. The reduced bulk also simplifies storage and integration into inspection kits, enabling technicians to perform frequent checks without needing specialised fixturing. Proven sourcing and consistent supply for production workflows As part of the Metav IndustryLine range, the square benefits from a distribution and quality filter established in Emmerich, backed by broad product availability for production and maintenance departments. The design prioritises practical shop use and repeatability, helping to standardise inspection routines across shifts. For purchasers seeking a robust, standards-compliant angle reference, this control square delivers the core attributes of durability, conformity and compact usability. For durable, standards-compliant right-angle checking choose the Metav IndustryLine inspection square and contact Metav Werkzeuge for procurement or technical clarification: info@metav-werkzeuge.com, +49 2822 7131930 Technical data Article number: M214.344 SKU: M214.344 GTIN: 4054469108261 Standard: DIN 875/1 Facts Dimensions: 100 x 70 mm ECLASS: 21170119 Tariff number: 90178090 Special features Material: Normal steel Flat profile Category: Angle (control square) Brand: Metav IndustryLine FAQ Is this square suitable for routine inspection in a machine shop? Yes. The Inspection square 100 x 70 mm from Metav IndustryLine (SKU M214.344) is produced to DIN 875/1 and is intended for routine right-angle verification and alignment tasks. What material is the tool made from and how durable is it? The tool is made from normal steel; this provides a balance of stiffness and toughness suitable for repeated bench and workshop use while resisting typical wear. Can the square be used on precision fixtures and jigs? The compact 100 x 70 mm format and flat profile allow easy placement against fixtures and jigs for quick squareness checks; it is most effective as a reference tool rather than a substitute for high-precision metrology benches. Is a calibration certificate supplied with the product? No calibration certificate is specified for this item. If an instrument with formal calibration documentation is required, a separate calibration service should be arranged. How should the angle be stored to maintain accuracy? Store the square in a dry, dust-free environment and avoid impact or long-term loading on the legs; periodic visual checks for burrs or nicks will preserve reliable reference performance. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100 x 70 mm Stop Angle With Stop, DIN 875/2 - Metav IndustryLine
Take advantage of the DIN 875/2 accuracy, robust mild steel construction and integrated stop to secure repeatable right‑angle checks in everyday workshop and inspection tasks. Order the angle square directly via Metav Werkzeuge or consult the team for specification support and delivery from Emmerich. Angle Stop Square 100 x 70 mm (DIN 875/2) — Metav IndustryLine The Angle Stop Square 100 x 70 mm (DIN 875/2) is a compact precision square designed for layout, inspection and repeatable positioning in metalworking and engineering workshops DIN 875/2 accuracy class Integrated stop for repeatable positioning Robust mild steel construction Compact 100 x 70 mm working dimensions Consistent right‑angle checks that protect production quality This compact inspection tool delivers precision where repeatability matters. Built to the DIN 875/2 tolerance class, the square ensures reliable reference for perpendicularity checks and assembly alignment. The combination of defined geometry and a secure stop reduces human error during repeated set‑ups, improving throughput and cutting rework. For quality assurance tasks, the geometry provides a verifiable baseline that supports traceable inspection routines and consistent assembly outcomes. Compact form that speeds up workshop workflows The short footprint and refined profile make this angle instrument simple to position and manoeuvre on a bench or machine table. With 100 x 70 mm working dimensions and an integrated stop, the device is easy to handle single‑handedly and to clamp for repetitive tasks, saving time during fixture set‑up and component marking. The compact design particularly benefits busy shops that require immediate, dependable right‑angle checks without the space or setup time of larger fixtures. Durable construction and clear technical conformity Manufactured from mild steel, the tool resists everyday wear while providing a stable squaring reference. The integrated stop aids reproducible placement, and the adherence to DIN 875/2 signals measured manufacturing controls for machinist squares. This combination supports long service life and dependable inspection results under normal workshop conditions. The product is suitable as a workshop standard for layout and verification where a robust, easy‑to‑use squaring implement is required. For dependable right‑angle verification specify the Metav IndustryLine angle stop square and contact Metav Werkzeuge for tailored advice and fast supply from Emmerich. Technical Data Article number: M214.573 GTIN: 4054469109251 Manufacturer: Metav IndustryLine Dimensions: 100 x 70 mm Material: Normalstahl Standard: DIN 875/2 Feature: with stop Facts ECLASS: 21170119 Customs tariff number: 90178090 SKU: M214.573 Special features Integrated stop for repeatable positioning Robust mild steel construction Designed for layout and inspection in metalworking FAQ Is this tool suitable for routine inspection and marking? The Angle Stop Square 100 x 70 mm (DIN 875/2) is intended for routine squaring, layout and inspection tasks where a compact, repeatable right‑angle reference is required. What does conformity to DIN 875/2 mean for accuracy? DIN 875/2 denotes a defined machinist square tolerance class; it indicates the square meets specific perpendicularity and manufacturing controls appropriate for workshop inspection work. Can the square be clamped for repetitive operations? Yes, the integrated stop and its compact geometry make the device straightforward to clamp or use against workpieces for repeatable positioning. What material is used and how does that affect durability? The instrument is made from mild steel, offering a durable reference surface for everyday workshop use while remaining straightforward to clean and maintain. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000 x 1000 mm Flange Square, Galvanised, Factory Standard - Metav IndustryLine
Take advantage of the combination of a large 1,000 x 1,000 mm measuring surface, a galvanised corrosion‑resistant finish and robust special‑steel construction for reliable squareness checks and long service life; order the flange square directly via Metav Werkzeuge or request advice from our consultants. Flange square M214.545 — 1,000 x 1,000 mm galvanised measuring angle (Metav IndustryLine) The Flange square M214.545 is a large-format, galvanised measuring angle designed for checking and aligning flanges, plates and welded assemblies in workshop and inspection environments. Large 1,000 x 1,000 mm measuring surface Galvanised special steel for corrosion resistance Low weight of 2.9 kg for easy handling Supplied to factory standard (Werksnorm) Large-format accuracy for flange alignment The 1,000 x 1,000 mm faces provide a generous reference area that speeds up set‑up and reduces the need for repeated repositioning. Constructed from special steel with a galvanised finish, the angle resists surface corrosion and stays dimensionally stable in typical shop conditions, which supports reproducible squareness checks. For production environments the large contact faces make it practical to check multiple bolt holes or flange edges in one operation, cutting inspection time and lowering the risk of assembly rework. Workshop efficiency and straightforward handling At a weight of 2.9 kg, the unit is comparatively light for its size, enabling single‑person positioning on benches and fixtures while still offering the necessary rigidity for reliable 90° referencing. The compact mass reduces operator fatigue and speeds throughput in repetitive tasks. Delivered according to factory standard (Werksnorm), the component meets consistent internal quality checks and is ready for immediate use in fabrication, welding jigs and alignment processes without further preparation. Durable finish and seamless integration into inspection workflows The galvanised coating gives practical protection in humid or mildly corrosive atmospheres, so the angle maintains a usable surface longer than untreated steel. Its flat, right‑angled faces integrate readily with clamping fixtures, straightedges and height gauges, allowing straightforward comparison measurements and visual control. Backed by Metav’s European supply chain and quality filtering in Emmerich, the product is part of a range chosen to deliver dependable availability and workshop compatibility for industrial users. For dependable large‑format squareness checks select the Metav IndustryLine flange square and contact Metav Werkzeuge in Emmerich for delivery and technical advice: info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.545 GTIN: 4054469181547 Material: Special steel, galvanised Dimensions: 1000 x 1000 mm Weight: 2.9 kg Packaging: without packaging Norm: Werksnorm Facts Dimensions: 1000 x 1000 mm Weight: 2.9 kg GTIN: 4054469181547 SKU: M214.545 Special features Galvanised finish Special steel construction Measuring angle for flange alignment Category: Measuring angle (Winkel) Supplied without packaging FAQ What is the flange square used for? The flange square M214.545 is used to check and align flanges, welded assemblies and machine components where a reliable 90° reference is required. Is the galvanised finish suitable for workshop and outdoor environments? The galvanised coating on the M214.545 provides practical corrosion resistance for typical workshop conditions and for short‑term outdoor exposure; severe outdoor environments may require additional protection. How easy is the unit to position and handle? With a weight of 2.9 kg, the flange square M214.545 is straightforward to handle and position by one person, enabling faster inspection cycles and simpler integration into fixtures. Does the product meet a recognised standard? The flange square is supplied to a factory standard (Werksnorm) to ensure consistent production quality and readiness for industrial use. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000 x 500 mm Carpenter's Square Flat Galvanised, Workshop Grade Werksnorm - Metav IndustryLine
Reliable flat galvanised construction and clear 1,000 × 500 mm reference faces deliver precise, repeatable marking and alignment for metalworking and fabrication. Combine robust special-steel build, corrosion-resistant finish and straightforward handling for efficient shop-floor workflows. Order the fitter's square directly via Metav Werkzeuge or consult our advisers for application support. Fitter's square M214.513 — flat galvanised, 1,000 x 500 mm The fitter's square, 1,000 x 500 mm, flat galvanised is a flat-profile shop tool for layout, straightening and right‑angle alignment in general metalworking and fabrication. 1,000 × 500 mm flat reference faces Galvanised special steel for corrosion resistance Flat profile for stable contact and marking Precision reference for repeatable marking The flat profile and generous leg lengths provide a stable right‑angle reference that reduces set‑up time and avoids rework. The long arm (1,000 mm) and short arm (500 mm) give a large working envelope for marking, scribing and checking assemblies, while the flat, galvanised faces ensure consistent contact across the whole length. The square’s construction is aimed at delivering repeatable alignment when installing fixtures, aligning panels or checking welded seams, so inspection and layout tasks stay efficient and predictable. Durable build that withstands the workshop Manufactured from special steel with a galvanised finish, the tool resists surface corrosion common in busy shops and outdoor worksites. The flat design minimises rocking on thin sheets and provides a clear datum even when used on slightly uneven surfaces. At approximately 2 kg, the component balances robustness with manageable weight, making it straightforward to position by one person while remaining rigid enough for reliable measurement and marking tasks. Time-saving handling and practical benefits A flat, corrosion-protected face simplifies scribing and reduces burrs or snags during use, which speeds repeat operations and lowers the risk of damage to workpieces. The square’s profile supports both quick visual checks and more accurate layout when paired with straightedges or marking gauges, helping to shorten the production loop from marking to machining. Built to a factory standard, it provides a consistent reference without the need for frequent adjustment, aiding throughput in repetitive jobs. Suitable applications and workshop fit The tool is well suited to sheet-metal work, general fabrication, straightening and jig set-up where a durable, long‑arm right angle is required. It performs reliably for trimming, alignment of frames and fixtures, checking squareness before welding, and for transfer marking on large components. The combination of a flat design, extended reach and galvanised finish makes it particularly appropriate for environments where corrosion and frequent handling are factors. For a dependable shop-floor square from the Metav IndustryLine, contact Metav Werkzeuge to check stock and confirm suitability for specific applications — phone +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M214.513 GTIN: 4054469109008 Label: Fitter's square, 1000 x 500 mm, flat galvanised Category: Measuring tools / Squares Finish: Galvanised Standard: Factory standard Facts Length (long arm): 1,000 mm Length (short arm): 500 mm Weight: 2 kg Tariff number: 90178090 Special features Material: Special steel, galvanised Profile: Flat Intended use: Layout, marking, straightening, alignment Designation: Flat fitter's square FAQ Is the square suitable for outdoor or humid workshop use? The fitter's square M214.513 is finished in galvanised special steel, which provides enhanced resistance to corrosion and makes it suitable for use in humid or exposed workshop conditions. What applications is this square designed for? This Metav IndustryLine fitter's square is intended for marking, straightening and right‑angle alignment in fabrication, sheet-metal work and jig set-up where a stable, long‑arm reference is required. How large are the measuring faces and how does that affect handling? The tool features a 1,000 mm long arm and a 500 mm short arm; the extended reach allows alignment of larger components while the overall mass (approx. 2 kg) keeps it easy to position by a single operative. Does the product comply with a recognised standard? The square is produced to a factory standard (Werksnorm) intended to ensure consistent quality for shop‑floor use; it is supplied as a ready‑to-use measuring and layout aid. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm 35x1.2mm Carpenter's Square Stainless Seamless With mm Scale - Metav IndustryLine
Precision and durability meet practical layout performance in a long‑reach, stainless‑steel framing square with an integrated millimetre scale and a rigid 35 × 1.2 mm profile; order directly via Metav Werkzeuge or consult our specialists for application recommendations. M214.913 Carpenter's square — stainless seamless, 1000 × 380 mm, mm scale The M214.913 Carpenter's square is a long‑arm framing square engineered for accurate right‑angle checks and layout work in carpentry, timber framing and site assembly. *1000 × 380 mm long framing square *Seamless stainless steel profile for corrosion resistance *Integrated millimetre scale for direct reading Accurate layout for timber and structural work This framing tool delivers right‑angle accuracy across a 1,000 mm main arm and a 380 mm blade, enabling rapid transfer of lines and checks on large timber sections. The clearly engraved mm scale removes the need for separate rules during many layout tasks, saving time during repetitive marking. The cleanly finished edges ensure the square seats consistently against workpieces, which supports repeatable measurements and fewer rechecks on site. Robust, corrosion‑resistant build for everyday use Manufactured from stainless steel in a seamless profile, the square resists corrosion and maintains its flatness under workshop and site conditions. The 35 × 1.2 mm cross‑section provides a balanced stiffness-to-weight ratio: rigid enough for dependable referencing yet light enough for single‑person handling. The absence of scribing holes preserves structural integrity along the blade, reducing the chance of stress concentrations and ensuring long service life in harsh environments. Streamlined workflow and quality assurance Marked with a direct millimetre scale and supplied under a clear SKU and GTIN, this framing square integrates into quality control routines and parts documentation without extra conversion. The compact weight of approximately 0.6 kg and the slim profile make the tool easy to clamp or hold during layout, speeding up assembly and reducing idle time. For contractors and joiners seeking consistent results, the combination of stainless construction and a precise scale offers measurable gains in efficiency. Choose the Metav IndustryLine M214.913 for durable, corrosion‑resistant layout work — contact Metav Werkzeuge for procurement and delivery advice tailored to the workshop. Technical Data Article number: M214.913 GTIN: 4054469183428 Weight: 0.6 kg Material: stainless steel, seamless Cross‑section: 35 × 1.2 mm Marking: millimetre scale Special feature: without scribing holes Category: Angles / Squares Facts Length (main arm): 1,000 mm Blade length: 380 mm Arm thickness/profile: 35 × 1.2 mm Special features Seamless stainless profile Integrated mm graduation for direct reading Smooth edges for consistent seating FAQ What materials is the square suitable for? The M214.913 Carpenter's square is suitable for timber and general workshop materials where a rigid, corrosion‑resistant reference is required. How is the measurement information presented on the tool? The framing square features an integrated millimetre scale directly engraved on the blade for immediate reading without additional rulers. Does the square have scribing holes for marking? This model is specified without scribing holes, preserving the profile's rigidity and preventing weak points along the blade. Which identifier should be used for ordering or stock control? Use the SKU M214.913 and GTIN 4054469183428 for ordering and inventory purposes. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Carpenter Square With Holes 35x1.2mm Stainless Steel With Mm Scale, Perforated Every 5mm - Metav IndustryLine
A stainless, seamless construction combined with a clear mm scale and evenly spaced scribing holes every 5 mm provides reliable layout performance and long-term corrosion resistance. Choose the robust 35 x 1.2 mm profile for steadiness during marking and assembly — order directly via Metav Werkzeuge or consult our advisors for application guidance. Zimmermannswinkel M214.923 — Carpenter's square, stainless steel with 5 mm scribing holes Zimmermannswinkel M214.923 is a workshop-grade carpenter's square engineered for precise marking and layout tasks in joinery and light metalwork, combining a rigid profile with a practical mm scale. Seamless stainless steel construction Integrated mm scale for quick measurements Scribing holes every 5 mm for accurate marking Robust 35 x 1.2 mm cross-section for rigidity Durable, corrosion-resistant construction for everyday workshop use The seamless stainless steel build ensures constant dimensional stability and resistance to rust in typical workshop environments. The flattened profile with a 35 x 1.2 mm cross-section delivers the necessary rigidity to resist bending during repeated use, keeping angles true over time. At approximately 0.55 kg, the balance of mass and stiffness makes the tool manageable for single-person layout tasks while remaining solid enough to register reliably against timber edges or metal faces. These material choices reduce maintenance and provide a predictable reference edge for joinery or assembly operations. Faster, repeatable layout thanks to mm scale and scribing holes The integrated mm scale and the series of scribing holes every 5 mm accelerate marking, especially when transferring repeated measurements or setting out multiple identical components. The holes accept a pencil or scribing awl, allowing marks to be placed with consistent offset and avoiding guesswork at the saw or cutting bench. The result is a measurable increase in throughput and a reduction in rework: layouts are quicker to perform, and parts line up more predictably during assembly. The M214.923 is therefore particularly suited to carpenters, joiners and workshop technicians who value throughput without sacrificing precision. Practical handling and adaptability in the workshop The square’s geometry and weight distribution support stable positioning against workpieces, enabling clean interior, exterior and step measurements during routine tasks. The smooth stainless surface is easy to clean after site use and remains dimensionally reliable in fluctuating humidity. The robust profile also facilitates clamping when a fixed, repeatable datum is required for production jigs or simple fixtures. Supplied as a straightforward layout tool, this format integrates easily into existing workflows and complements precision measuring instruments when a durable reference edge is needed. Contact Metav Werkzeuge for tailored advice on integrating the Metav IndustryLine Zimmermannswinkel M214.923 into the workshop and to discuss quantities or delivery options. Technical data SKU: M214.923 GTIN: 4054469183466 Article designation: Carpenter's square with holes 1000 x 380, 35 x 1.2 mm, stainless, seamless, with mm scale Facts Length: 1,000 mm Arm width: 380 mm Cross-section: 35 x 1.2 mm Weight: 0.55 kg eClass: 21170119 Special features Material: stainless steel, seamless mm scale integrated Scribing holes every 5 mm Corrosion-resistant finish FAQ What material is the square made from? The carpenter's square is made from seamless stainless steel, providing corrosion resistance and long-term dimensional stability. Are the scribing holes suitable for precise marking? Yes. The scribing holes, spaced every 5 mm, enable repeatable pencil or awl marks for consistent layout across multiple parts. Is this square rigid enough for workshop use? The 35 x 1.2 mm cross-section offers a rigid profile that resists bending during routine marking and assembly tasks, ensuring reliable angle references. Can the mm scale be read quickly on the tool? The integrated mm scale is engraved for clear visual reading, designed to speed up measurement and reduce marking errors in joinery and light metalwork. Which applications suit this square best? This square is ideal for carpentry, joinery and general workshop layout, where corrosion resistance, steady reference edges and rapid marking are required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000mm Carpenter's Square, Stainless Steel, Yellow Powder-Coated, mm Scale And Scriber Holes Every 5mm - Metav IndustryLine
Combine seamless stainless construction, a practical millimetre scale with 5 mm scribing holes and a slim 35 × 1.2 mm profile for reliable right-angle marking and easy handling; order the Carpenter's Square directly via Metav Werkzeuge or consult our experts for suitability. Carpenter's Square M214.933 — Seamless stainless right-angle with millimetre scale The Carpenter's Square M214.933 is a large-format right-angle measuring and marking tool for carpentry and formwork, designed for fast, repeatable layout with enhanced visibility and corrosion resistance Seamless stainless construction, yellow coating Integrated millimetre scale with 5 mm scribing holes Slim 35 × 1.2 mm cross-section for low weight Lightweight at 0.55 kg for easy handling Precision and speed for layout tasks The tool delivers consistent right-angle accuracy through its seamless stainless body, which reduces play and deformation during everyday use. The integrated millimetre scale shortens setup times and, together with the evenly spaced scribing holes, enables fast transfer of repeated measurements without re‑marking. As a result, planning and marking become more efficient, reducing cycle time on repetitive joinery and formwork operations. Durability and on-site visibility A yellow powder-coating improves contrast against timber and makes markings easier to read in workshop and outdoor conditions, while the stainless base ensures corrosion resistance when used on building sites. The slim 35 × 1.2 mm cross-section balances stiffness and weight: the profile is rigid enough to preserve measurement integrity yet light at 0.55 kg, which simplifies handling for those frequent two-handed alignment tasks. Practical marking features that save time The built-in scribing solution with holes every 5 mm allows direct transfer of measurements and precise score lines along the blade, eliminating extra steps with separate scribers. This practical feature complements the clear millimetre scale, enabling accurate positioning for cuts, joinery lines and drilling set‑outs. The design minimises the need for additional fixtures and supports faster, cleaner layout work. Where this square performs best Designed for tradespeople and workshop environments, the square is particularly suited to carpentry and formwork, joinery setup and general timber construction where repeatable, visible layout is essential. Its robust materials and visible coating make it a reliable tool for job sites, workshops and production benches, bridging the gap between portable convenience and workshop-grade rigidity. For high-visibility, corrosion-resistant layout work contact Metav Werkzeuge in Emmerich for advice or to request the Carpenter's Square M214.933 at info@metav-werkzeuge.com or +49 2822 7131930 Technical data SKU: M214.933 Material: stainless steel, seamless, yellow powder-coated Weight: 0.55 kg Cross-section: 35 × 1.2 mm Facts Scribing hole spacing: 5 mm Scale: millimetre graduation Profile type: slim rigid blade Special features Integrated millimetre scale and scribing holes Seamless construction to reduce deformation Yellow powder-coating for improved visibility Suitable for carpentry, joinery and formwork FAQ What applications is this square best suited for? The Carpenter's Square M214.933 is optimised for carpentry and formwork layout, where clear markings and repeatable right-angle measurements are required. How do the scribing holes improve workflow? Scribing holes every 5 mm on the blade allow direct transfer of measurements and clean score lines, speeding up repetitive marking processes with the Carpenter's Square M214.933. Is the blade resistant to corrosion? Yes, the seamless stainless construction combined with a yellow powder-coating provides corrosion resistance and enhanced on-site visibility for prolonged use. What does the 35 × 1.2 mm cross-section mean for handling? The 35 × 1.2 mm profile offers a balance of stiffness and low weight, making the square rigid enough for accurate layout while remaining easy to manoeuvre at 0.55 kg. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000x500 mm Locksmith Square With Stop, Galvanised Steel Werksnorm - Metav IndustryLine
Take advantage of a robust, galvanised large-format square that combines stability and repeatable set-ups for efficient layout work; its substantial mass and special-steel construction ensure minimal flex during alignment tasks. Order directly via Metav Werkzeuge or contact our consultants for application advice and delivery options. Machinist's square M214.533 — Galvanised large-format layout square with stop (1000 x 500 mm) — Metav IndustryLine The machinist's square M214.533 is a heavy-duty layout and alignment square designed for workshop and metalworking use, combining a large measuring face with an integrated stop for repeatable positioning and a corrosion-resistant galvanised finish. Large 1000 x 500 mm layout surface Galvanised special-steel for corrosion resistance Integrated stop for repeatable alignments Robust 5.6 kg construction for stability Precise alignment for large components The substantial 1000 x 500 mm face delivers a consistent reference for marking and checking right angles on medium to large workpieces. The tool’s mass and profile reduce the risk of bending during transfer and positioning, which improves repeatability across multiple operations. For shop-floor tasks that demand clear, straight reference edges—such as scribing, checking flanges or aligning welded assemblies—the large-format face simplifies setup and shortens cycle times by reducing repositioning steps. Built for durability and corrosion resistance Manufactured from special steel and finished in a galvanised coating, the square is optimised for everyday industrial environments where moisture or coolant exposure is possible. The galvanised layer protects the substrate and maintains a clean, readable surface that resists premature wear. This durability translates into lower life‑cycle costs and fewer interruptions for maintenance, supporting a steady production flow in fabrication and assembly areas. Repeatable set-ups and practical handling The integrated stop (Anschlag) enables quick, repeatable positioning of parts without improvised fixtures, so alignment tasks become both faster and more consistent. The tool’s 5.6 kg mass provides stability during scribing and inspection, helping to keep the reference edge seated firmly against the workpiece. Handling remains practical despite the weight: edges are engineered for safe gripping and controlled placement, enabling one- or two-person use for most layout operations while maintaining control over accuracy. Clear workshop benefits and operational efficiency Using a dedicated large-format square reduces setup variability and supports leaner workflows: fewer adjustments, less rework and a lower rate of dimensional rejects. The solid construction and corrosion-resistant finish mean fewer replacements and predictable lifetime performance on the shop floor. For suppliers and workshops that value dependable tooling, this square delivers the pragmatic advantage of a long-lasting, low-maintenance reference instrument that keeps routine jobs moving. Contact Metav Werkzeuge today for application guidance and to reserve the Metav IndustryLine machinist's square M214.533 for your next layout project — expert advice and fast dispatch from Emmerich are available Technical Data Article number: M214.533 GTIN: 4054469109114 Category: Square Facts Dimensions: 1000 x 500 mm Weight: 5.6 kg Material: Special steel Finish: Galvanised Tariff number: 90178090 Standard: Werksnorm Special features With stop (Anschlag) Large-format layout face Robust construction for workshop use FAQ What materials is this square suitable for? The square is manufactured from special steel with a galvanised finish; it is intended for general workshop and metalworking use and performs well when checking and marking steel and other common workshop materials. How does the integrated stop improve workflow? The stop enables repeatable positioning so multiple parts can be set up and marked with consistent reference points, reducing setup time and improving dimensional repeatability with the machinist's square M214.533. Is the surface corrosion resistant? Yes, the galvanised coating provides corrosion resistance and preserves the reference surface under typical workshop conditions. Can the square be used for inspection tasks as well as layout? The tool’s stable profile and large face make it suitable for basic inspection tasks such as verifying squareness and aligning assemblies in addition to scribing and layout duties. What is the practical advantage of the tool’s mass? At approximately 5.6 kg, the mass helps to stabilise the square during marking and checking, reducing the likelihood of movement and improving the accuracy of manual operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
1000x630x80mm Granite Square 90° Grade 0, DIN 875/0 - Metav IndustryLine
Take advantage of the combination of DIN 875/0 precision, wear‑resistant granite construction and the large 1000×630×80 mm working face for reliable 90° reference checks; order directly via Metav Werkzeuge or request application advice from our consultants. Granite square 90° — Grade 0, 1000×630×80 mm (Metav IndustryLine) The Granite square 90° (Grade 0) is a heavy‑duty reference instrument for checking and setting 90° squareness on machine spindles and large workpieces in production and inspection environments. Granite construction, wear‑resistant surface DIN 875/0 accuracy for 90° checks Size 1000×630×80 mm for large components Heavy 101 kg base for vibration damping Stable reference for machine alignment and reproducible results The instrument provides a dependable reference surface for aligning spindles, fixtures and machined parts, combining geometric stability with a certified manufacturing tolerance. Built to DIN 875/0, the square offers Grade 0 accuracy that supports repeatable angle checks and reduces setup time in inspection routines. As a consequence of the heavy 101 kg mass and the rigid granite body, the component resists micro‑vibrations and stands as a stable datum when verifying perpendicularity on large assemblies. Material and construction that preserve calibration longer Manufactured from natural granite, the block benefits from low thermal expansion and excellent wear properties compared with many metallic standards. The stable coefficient of expansion helps to maintain dimensional integrity across normal workshop temperature fluctuations, which in turn reduces the frequency of re‑adjustments. The wear‑resistant measuring faces and the solid cross section minimise surface deformation during routine use, contributing to longer intervals between servicing and a lower total cost of ownership for quality assurance tasks. Practical handling and application in workshop workflows With overall dimensions of 1000×630×80 mm, the square covers large contact areas for spacious workpieces and provides a clear datum for both machine and bench checks. The instrument is intentionally heavy to improve damping; safe handling procedures and suitable lifting equipment are recommended when moving or positioning the block. Typical applications include perpendicularity checks of machine spindles, verification of fixture squareness and use as a stable right‑angle reference in assembly or metrology setups. The robust granite design supports regular workshop use without rapid wear, ensuring consistent performance across repeated measurements. Contact Metav Werkzeuge for availability, delivery options and application guidance for the Metav IndustryLine granite square and related precision standards Technical Data Article number: M214.609 GTIN: 4054469109459 Dimensions: 1000×630×80 mm Weight: 101 kg Material: Granite Standard: DIN 875/0 Tariff code: 68022300 Facts Measuring angle: 90° Grade: 0 Length × width × height: 1000×630×80 mm Mass: 101 kg Special features Wear‑resistant granite surface Solid, vibration‑damping base Suitable for spindle and workpiece squareness checks E‑class: 21170119 FAQ What level of accuracy does the square deliver? The product is manufactured to DIN 875/0 tolerances; Grade 0 offers the high precision required for reliable 90° reference checks in inspection and setup operations. Can the square be used directly on machine tables and spindles? Yes; the Granite square 90° is designed as a reference for machine‑spindle and workpiece checks and provides a large, stable contact area for such applications. Does the granite material affect thermal stability during measurement? Granite has a low coefficient of thermal expansion and excellent dimensional stability, which helps preserve measurement integrity under normal workshop temperature variations. Are lifting aids required for handling? Due to the substantial mass (101 kg), mechanical lifting or multiple‑person handling is recommended to position the square safely and without risk of damage. What types of inspection tasks is this square best suited for? It is ideal for perpendicularity checks, fixture and jig verification, and any application requiring a durable, repeatable 90° reference over a large contact area. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100mm Multiple-Angle Square With Stop, 1/25° Factory Standard - Metav IndustryLine
Combine compact 100 mm measuring length, factory standard 1/25° tolerance and robust mild steel construction to speed up repeatable inspection and layout tasks. Order the Multi-angle gauge directly via Metav Werkzeuge or ask our consultants for application advice. Multi-angle gauge 100 mm — multi-angle inspection square by Metav IndustryLine, factory 1/25° The Multi-angle gauge 100 mm is a compact multi-angle inspection tool engineered for quick angle checks and layout work in precision workshops and production benches. 100 mm measuring length Factory standard 1/25° angular tolerance Mild steel construction for durability Integrated stop for repeatable positioning Accuracy that keeps inspection reliable Built to support consistent measurement workflows, this compact gauge delivers an indicated accuracy of 0.04 that stabilises pass/fail decisions at the bench. The factory standard 1/25° establishes a clear tolerance baseline across production batches, minimising interpretation differences between inspectors and operators. Presented as a small-format tool, it is especially useful where short-reach, repeatable checks are required; the design reduces fixturing time and helps maintain a steady throughput during serial inspection tasks, contributing to an efficient quality routine. Practical design for everyday workshop use The unit's mild steel construction balances rigidity and manageable weight (approx. 0.2 kg), allowing quick handling without compromising edge stability. An integrated stop provides positive seating for components, so positioning becomes repeatable even under frequent use. The instrument's compact dimensions suit fine mechanical and general metalworking environments alike: its form factor simplifies alignment in confined set-ups and enables rapid interchange between layout, inspection and machine preparation operations. Confidence, supply and expert support from Metav As part of the Metav IndustryLine range, this multi-angle instrument is backed by a supplier that emphasises consistent availability and specialist guidance. The compact gauge complements a workshop strategy that values clear standards and dependable tools; pairing a defined factory tolerance with a robust build reduces rework and supports traceable inspection workflows. For tailored recommendations on implementing the gauge within existing procedures, Metav Werkzeuge’s product specialists can advise on best-fit use cases and complementary fixtures. Contact Metav Werkzeuge today to discuss how the Metav IndustryLine Multi-angle gauge 100 mm can be integrated into inspection routines and to request further technical details or purchasing information. Technical data Article number: M214.444 GTIN: 4054469108803 eClass: 21170139 Tariff number: 90178090 Facts Measuring length: 100 mm Accuracy: 0.04 Weight: 0.2 kg Special features Multi-angle design for common fixed angles Factory standard 1/25° Mild steel construction Integrated stop for repeatable positioning FAQ What level of precision can be expected from this gauge? The gauge is specified with an accuracy of 0.04, making the Multi-angle gauge 100 mm suitable for reliable bench-level inspection and layout tasks where consistent angular reference is required. Which materials is the gauge suitable for in workshop use? Constructed from mild steel, the inspection square withstands routine workshop handling and is appropriate for checking parts made from metals and common workshop materials. Is the gauge practical for confined or fine-mechanic setups? Yes, its 100 mm measuring length and compact form factor make the instrument well suited to confined setups and fine mechanical tasks where short-reach, repeatable checks are needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x100mm Eight-Sided 135° Angle Square Without Stop, DIN 875/2 - Metav IndustryLine
Take advantage of the combination of durable construction, a precise 135° geometry and a compact 100 x 100 mm face size for reliable set-ups and quick inspection checks. Order the M214.414 directly via Metav Werkzeuge or ask our consultants for application advice. M214.414 Octagonal 135° Inspection Angle — Metav IndustryLine The M214.414 octagonal 135° inspection angle is a compact workshop square for layout, assembly and inspection tasks where an oblique reference face is required. 135° octagonal profile 100 x 100 mm measuring faces Mild steel construction Conforms to DIN 875/2 Exact angle checks for oblique components The octagonal 135° inspection piece provides a stable, repeatable reference for verifying non‑right‑angle geometries. Built with an octagonal profile, the gauge seats securely against workpieces and reduces the risk of rocking that can occur with thinner sections. The 100 x 100 mm face area gives a consistent contact surface for layout, marking and inspection operations, helping to speed up set‑ups in smaller jigs and fixtures. Conformity with DIN 875/2 ensures the product meets recognised workshop accuracy levels, so measured results can be relied upon during production checks. Compact bench fit and robust material choice This inspection angle combines a space‑saving footprint with mild steel durability, making it suitable for routine workshop use where toughness matters. The absence of an integrated stop provides free positioning along edges and corners, which benefits tasks requiring flexible alignment rather than fixed‑limit gauging. The octagonal cross‑section also allows multiple stable contact orientations, simplifying handling and reducing repositioning time during repetitive checks. The robust finish and geometry support frequent use without rapid wear, preserving measurement consistency across shifts. Clear standards and dependable provenance Designed for everyday metrology and assembly work, the component aligns with industry expectations for inspection aids and is categorised for angle and layout applications. The combination of a defined 135° geometry and standard compliance delivers a pragmatic, measurable benefit: faster verifications with lower rework risk. Metav’s role as a quality gate for the European market adds an extra layer of assurance; the supply channel is supported from Emmerich with the logistics and technical advice expected by professional workshops and small manufacturers. For application assessment or to confirm suitability for a specific production task, contact Metav Werkzeuge for technical guidance and availability at +49 2822 7131930 or info@metav-werkzeuge.com Technical data SKU: M214.414 GTIN: 4054469108650 ECLASS: 21170119 Tariff number: 90178090 Facts Angle: 135° Face size: 100 x 100 mm Material: Mild steel Standard: DIN 875/2 Special features Octagonal profile Without stop Category: Angle (inspection) FAQ What is the primary application for this inspection angle? The M214.414 octagonal 135° inspection angle from Metav IndustryLine is intended for layout, assembly and inspection tasks where a stable oblique reference face is required. Which standard does this angle meet? The M214.414 complies with DIN 875/2, providing workshop‑level accuracy suitable for general inspection and set‑up purposes. Is the product supplied with a stop or fixed limit? No, the octagonal inspection angle is supplied without a stop, allowing flexible positioning and multiple contact orientations. What are the exact face dimensions and angle of the gauge? The gauge features 100 x 100 mm measuring faces and a fixed 135° geometry for oblique checks. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x100mm Hexagon Angle 120° Without Stop, DIN 875/2 - Metav IndustryLine
Take advantage of the robust carbon steel construction, exact 120° reference geometry and compact 100 x 100 mm footprint for consistent setup and inspection results; order the angle block directly via Metav Werkzeuge or contact our consultants for technical advice. Metav IndustryLine Hexagonal Angle Block 120° — 100 x 100 mm, DIN 875/2 A Hexagonal Angle Block 120° designed for workshop alignment, fixture checking and quality control tasks where a reliable 120° reference is required 120° precision geometry to DIN 875/2 Compact 100 x 100 mm footprint Manufactured from carbon steel Supplied without stop for flexible use Reliable 120° reference for repeatable alignment The hexagonal angle block delivers a precise 120° datum that conforms to DIN 875/2, providing a stable reference for machining set-ups and inspection work. The standardised geometry reduces uncertainty during assembly and inspection, meaning fewer adjustment cycles and less rework. Where reproducibility matters, this solid reference minimises alignment drift and supports consistent part runs on jigs, fixtures and inspection benches. Stiff, compact design suited to daily workshop use With a 100 x 100 mm footprint and a plain carbon steel body, the tool combines stiffness with a small form factor that is easy to handle in crowded set-ups. The absence of an integrated stop allows the block to be positioned freely against a workpiece or clamping device, enabling flexible uses such as checking shoulder angles, verifying angled faces or serving as a simple datum in fixture assembly. The compact dimensions balance reach and rigidity for everyday machining and assembly tasks. Integrates into quality routines and inspection workflows As a dedicated angle reference, this block is well suited to quality control, incoming inspection and fixture validation. The simple geometry makes the component straightforward to verify against calibration standards and easy to include in routine measurement procedures. Supplied under the Metav IndustryLine, the product benefits from Metav’s emphasis on accessible precision and dependable sourcing, supporting workshops and small production facilities with a trustable measurement backbone. For a robust 120° reference that supports reproducible setups, contact Metav Werkzeuge to acquire the Metav IndustryLine Hexagonal Angle Block M214.454 — technical advisors can be reached at info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.454 GTIN: 4054469108872 Eclass: 21170119 Tariff number: 90178090 Norm: DIN 875/2 Facts Angle: 120° Dimension: 100 x 100 mm Special features Material: carbon steel Supplied without stop Category: angle measuring device FAQ What applications is this angle block suitable for? The Metav IndustryLine Hexagonal Angle Block 120° is suitable for fixture alignment, angle verification, assembly checks and quality control in machine shops and inspection departments. Is the geometry traceable to a recognised standard? Yes, the 120° geometry is produced to meet DIN 875/2 requirements, ensuring a recognised reference for inspection and set-up tasks. Can the block be used as a portable reference in the workshop? The compact 100 x 100 mm size and solid carbon steel construction make it convenient for portable use on benches and inside fixtures where a stable 120° reference is needed. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x63x16 mm Granite Square 90° Grade 0, DIN 875/0 - Metav IndustryLine
Take advantage of the combination of Grade 0 accuracy, stable granite construction and a compact footprint to speed up setup and ensure reproducible 90° checks in inspection and machine alignment tasks. Order the granite square directly via Metav Werkzeuge or consult the team for application advice. Granite Square 90° M214.604 — Grade 0 granite angle for precision inspection (DIN 875/0) by Metav IndustryLine Granite Square 90° M214.604 is a precision angle designed for reliable 90° checks and alignment tasks in workshops and inspection areas, suitable for use during machine setup and quality control Grade 0 accuracy (DIN 875/0) High-stability granite body Compact 100 x 63 x 16 mm footprint Reproducible alignment through certified accuracy The Grade 0 specification according to DIN 875/0 signals the highest class of geometric accuracy for an angle square in this category. This level of precision provides a clear, measurable basis for quality control and setup procedures, reducing uncertainty during spindle and workpiece alignment. By specifying a classified standard, the instrument contributes directly to traceable inspection routines and consistent measurement outcomes across repeated use. Material benefits that support day-to-day metrology Constructed from natural granite, the block combines rigidity with low thermal expansion and good wear resistance. These inherent material properties help maintain right-angle geometry over time and under typical workshop temperature variations. The non-magnetic and vibration-damping characteristics of granite also assist in delivering stable contact conditions during comparison measurements, while the compact 100 x 63 x 16 mm format facilitates handling and storage without sacrificing surface area for reliable seating. Practical application and handling in workshop workflows As a precision granite square, the unit is intended for routine checks of 90° relationships on components and machine interfaces where visual or feeler-based alignment is insufficient. The compact size favours quick integration into setup sequences and bench inspections, enabling faster cycle times and fewer iterative adjustments. For documentation and inventory, the item is listed under SKU M214.604 and can be used as a stable reference in inspection plans and jigs where repeatability is required. Choose the Metav IndustryLine M214.604 for Grade 0 accuracy and stable granite construction — purchase or request detailed specification sheets directly from Metav Werkzeuge GmbH in Emmerich via info@metav-werkzeuge.com or +49 2822 7131930 Technical Data Article number: M214.604 GTIN: 4054469109404 Material: Granite Standard: DIN 875/0 Dimensions: 100 x 63 x 16 mm SKU: M214.604 Category: Winkel eClass: 21170119 Facts Accuracy grade: 0 (DIN 875/0) Tariff number: 68022300 Special features Suitable for 90° alignment and inspection tasks Stable, low-expansion granite construction Compact footprint for workshop use FAQ What level of accuracy does this angle block offer? The M214.604 granite square is specified as Grade 0 in accordance with DIN 875/0, providing the highest standard of geometric accuracy within this product class for reproducible 90° checks. Is a calibration certificate included with the product? No explicit calibration status is stated in the product data; calibration and certification are handled on request or as specified in separate offers for the Metav IndustryLine granite square. Which advantages does the granite material provide for inspection use? Granite offers low thermal expansion, wear resistance and non-magnetic behaviour, which together support stable seating and repeatable measurements when using the M214.604 as a reference for right-angle checks. How should the granite square be stored and maintained? Store the square in a clean, dry environment away from heavy shocks. Clean surfaces with a lint-free cloth and avoid aggressive solvents; occasional inspection of seating faces for chips preserves measurement reliability. For which applications is this granite square best suited? The product is ideal for workshop and inspection tasks requiring reliable right-angle verification, such as spindle checks, fixture validation and component squareness assessments. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70 mm Angle Stop With Fence, Hardened Stainless Steel, DIN 875/0 - Metav IndustryLine
Combine the DIN 875/0 accuracy with a hardened stainless‑steel body and a compact 100×70 mm profile to ensure repeatable right‑angle checks in small assemblies; order directly via Metav Werkzeuge or consult our advisers for specification support. Precision engineer's square 100×70 mm — DIN 875/0, hardened stainless steel (Metav IndustryLine) Precision engineer's square 100×70 mm for compact, high‑accuracy squaring and setup tasks in workshop and inspection environments DIN 875/0 accuracy standard Hardened stainless steel construction Compact 100×70 mm profile Integral stop for repeatable positioning Guaranteed angle accuracy for quality control The DIN 875/0 rating denotes the highest tolerance class for hand-held right‑angle measuring tools and is the backbone of reliable squaring tasks. Built to this standard, the square delivers an objectively verifiable reference for assembly and inspection processes, reducing setup time and rework. The compact dimensions provide a short lever arm that improves stiffness, so the tool behaves predictably during contact checks; this combination supports stable measurement routines and clear pass/fail decisions in production environments. Robust construction that withstands workshop use Constructed from hardened stainless steel, the tool offers both surface hardness for wear resistance and corrosion‑resistant properties that prolong service life in mixed shop climates. The hardened stock preserves the established right angle under mechanical stress, while the compact form factor minimises deflection. An integral stop permits reproducible positioning against components or fixtures, turning a single manual check into a reliable reference step for repetitive tasks. These attributes cut downtime and maintain the flatness and squareness of jigs and assemblies over long service intervals. Practical benefits for everyday metrology and setup As a compact squaring aid, this instrument is ideal for small assemblies, jig making and routine inspection at the workbench. The short blade length suits confined spaces and small components, allowing quick outside and inside checks as well as step measurements where a repeatable reference is required. Its low mass and ergonomic profile support single‑hand operation while maintaining precision; this makes the tool a pragmatic addition to quality control kits and assembly benches where speed and reproducibility matter equally. Contact Metav Werkzeuge in Emmerich for technical advice on integrating the DIN 875/0 square into inspection routines or for assistance selecting the right size for specific applications Technical data Article number: M214.314 GTIN: 4054469108025 Customs tariff number: 90178090 Facts Dimensions: 100×70 mm Weight: 0.2 kg Special features Material: hardened stainless steel Accuracy standard: DIN 875/0 Feature: integral stop Manufacturer: Metav IndustryLine FAQ What level of accuracy can be expected from this square? The precision engineer's square meets the DIN 875/0 class, delivering the tight tolerances required for workshop‑grade inspection and setup tasks. Is the material suitable for humid or corrosive environments? Yes, the hardened stainless steel construction provides corrosion resistance appropriate for general workshop conditions and reduces the need for special storage. Can the square be used for repetitive positioning in fixture set‑up? The integral stop enables repeatable positioning, making the square suitable for recurring alignment tasks and fixture calibration. Which applications is the tool best suited to? The compact 100×70 mm profile is optimised for small assemblies, jig work and bench inspection where stiffness and ease of handling are priorities. What is the article number for ordering and reference? Reference the article number M214.314 when enquiring about the precision engineer's square from Metav IndustryLine. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70 mm Angle Stop With Stop, Hardened Stainless Steel, DIN 875/1 - Metav IndustryLine
Solid, hardened stainless-steel stop angle to DIN 875/1 with 100 x 70 mm faces combines rigidity and corrosion resistance for repeatable squaring and workshop alignment. Order the angle directly via Metav Werkzeuge or request specification advice from the consultants. Precision stop angle 100 x 70 mm (DIN 875/1) — hardened stainless-steel squaring tool (Metav IndustryLine) The Precision stop angle 100 x 70 mm is a compact, hardened stainless-steel squaring tool designed for workshop setup, fixture alignment and inspection tasks where repeatable right angles are required Hardened stainless-steel construction Conforms to DIN 875/1 100 x 70 mm measuring faces Compact design for easy positioning Assured squareness for reliable set-ups Conformity with DIN 875/1 provides a verifiable benchmark for squaring tasks: the manufacturing tolerance and flatness criteria embedded in the standard ensure the component serves as a consistent reference for machine set-up and quality checks. With 100 x 70 mm faces, the tool offers a practical contact area that balances accessibility and support, enabling repeatable squaring of small fixtures and workpieces. For production environments, this translates into fewer adjustment cycles and more dependable initial alignments. Durable material that reduces maintenance Built from hardened stainless steel, the stop angle resists wear and provides corrosion resistance where intermittent coolant exposure or humid storage might otherwise shorten service life. The hardened finish preserves edge integrity under frequent use, so calibration intervals are extended and workshop downtime is reduced. The compact geometry simplifies handling and placement in tight jigs while maintaining the rigidity required for accurate right‑angle checks. Practical use in workshop and inspection workflows The compact faces and robust construction make the tool suitable for bench inspection, assembly fixtures and as a stop for repetitive machining operations. It functions as a stable reference for gauging, aligning vice jaws or verifying squareness during assembly. Metrological tasks benefit from the clear specification to DIN 875/1, which supports traceability and quality documentation when the angle is used as a comparative standard in inspection routines. For tailored application advice or integration into a quality process, Metav’s technical consultants can provide specification support and compatibility guidance. For reliable squaring and durable corrosion resistance, contact Metav Werkzeuge to discuss the Precision stop angle (M214.334) and technical options — call +49 2822 7131930 or email info@metav-werkzeuge.com Technical data Article number: M214.334 GTIN: 4054469108186 ECLASS: 21170119 Material:rostfreier Stahl, gehärtet Standard: DIN 875/1 Label: Anschlagwinkel 100x70 mm, DIN 875/1, INOX Facts Dimensions: 100 x 70 mm Tariff number: 90178090 Special features With stop (mit Anschlag) Hardened stainless-steel construction Compact measuring faces suitable for fixture and inspection use FAQ What tolerance or standard does the stop angle meet? The stop angle is manufactured to DIN 875/1, which defines squareness and surface requirements for precision angle tools. Is the material corrosion resistant for workshop environments? Yes, the tool is made from hardened stainless steel, providing corrosion resistance suitable for typical workshop and inspection conditions. Which applications suit the 100 x 70 mm face size? The 100 x 70 mm faces are ideal for bench inspection, fixture alignment, vice jaw setup and small-assembly squaring tasks where a compact reference is required. What is the article number for ordering or reference? The item is listed as M214.334; reference this SKU when enquiring with Metav Werkzeuge. Can the angle be used as a reference standard in quality control? Conformity to DIN 875/1 makes the angle suitable as a comparative reference in routine quality checks and alignment procedures. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70 mm Control Square Flat, Stainless Hardened, DIN 875/1 - Metav IndustryLine
Reliable right‑angle control is ensured by the combination of a hardened stainless‑steel body and conformity with DIN 875/1, while the compact, flat 100 × 70 mm format keeps inspection quick and repeatable; order directly via Metav Werkzeuge or consult our specialists for application advice. Control square 100×70 mm (DIN 875/1) – hardened stainless‑steel inspection square by Metav IndustryLine The Control square 100×70 mm (DIN 875/1) is a compact, flat inspection tool designed for right‑angle verification in workshop and quality‑control environments Hardened stainless‑steel construction Conforms to DIN 875/1 tolerance class Compact flat design 100 × 70 mm Low weight 0.14 kg for easy handling A dependable reference for right‑angle checks The compact inspection square serves as a stable reference for routine right‑angle checks in production and assembly. Manufactured from hardened stainless‑steel, it resists deformation and provides a consistent datum for repeat measurements. Conformity with DIN 875/1 means the tool meets a recognised tolerance class, which simplifies acceptance in inspection routines and supports documented quality control. This makes it suitable for metalworking shops, fixture checks and incoming goods inspection where a clear, verifiable standard is required. Built to last with low maintenance demands Durability is a primary advantage of the design: the hardened stainless construction offers both surface robustness and corrosion resistance, reducing the need for frequent replacement or repair. The flat design minimises wobble when seated against mating surfaces, improving reproducibility of contact points and therefore measurement reliability. At a modest mass of 0.14 kg the square is easy to manoeuvre yet rigid enough for everyday workshop tasks, supporting long service life and steady inspection throughput. Compact format for flexible workshop use The 100 × 70 mm format balances reach and accessibility, allowing checks in confined assemblies, on fixtures or alongside measuring instruments. Its size and low weight favour single‑person use and quick transport between workstations, while the flat faces enable straightforward alignment against edges and faces. As an inspection square, it complements calipers and micrometres in a quality‑control kit, offering a fast visual and tactile verification of squareness before precision machining or assembly. For repeatable right‑angle inspection with hardened stainless‑steel accuracy, contact Metav Werkzeuge to secure the Metav IndustryLine control square or request application guidance. Technical data Article number: M214.324 GTIN: 4054469108094 Tariff code: 90178090 Facts Dimensions: 100 × 70 mm Weight: 0.14 kg Standard: DIN 875/1 Special features Material: hardened stainless steel Surface: flat Category: inspection/control square Brand: Metav IndustryLine FAQ How precise is the control square for workshop inspection? The control square meets DIN 875/1, providing a recognised tolerance class suitable for routine right‑angle verification with consistent repeatability; the Metav IndustryLine inspection square (SKU M214.324) is intended for workshop and QC procedures. Is the square resistant to corrosion and wear? Yes, constructed from hardened stainless steel, the tool offers enhanced corrosion resistance and surface durability, which helps maintain reference faces and reduces wear during regular use. What applications suit the 100 × 70 mm format? The compact dimensions make the square ideal for small assemblies, fixture checks and bench‑top inspection where access is limited but a reliable right‑angle reference is required. How should the inspection square be stored to retain accuracy? Store the square in a dry, stable environment and avoid heavy impacts or abrasive contact with other tools; gentle handling preserves the flat faces and maintains the measurement reference of the Metav IndustryLine control square. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70 mm Gauge Angle Flat, Hardened Stainless Steel, DIN 875/0 - Metav IndustryLine
Combining hardened stainless steel construction with DIN 875/0 accuracy, this flat inspection square delivers dependable right-angle verification for workshop and quality‑control tasks; order the inspection square directly via Metav Werkzeuge or consult their advisors for application support. Inspection square 100 × 70 mm (DIN 875/0) — hardened stainless steel, flat design | Metav IndustryLine The Inspection square 100 × 70 mm is a compact, flat gauge for fast and repeatable right‑angle checks in machining, toolmaking and bench‑level inspection. Hardened stainless steel construction Certified to DIN 875/0 Flat design for precise contact Compact 100 × 70 mm format Precise right‑angle checks that support quality control The flat, hardened stainless steel blade and stock are designed to provide a stable contact surface that reduces measurement uncertainty. Conformity to DIN 875/0 ensures the gauge is manufactured to a recognised tolerance class, supporting repeatable angle verification in incoming inspection and in‑process control. The construction minimises flex and wear, so the right angle remains consistent over prolonged use; this reliability translates into fewer setup checks and a smoother production flow. Durable design for workshop conditions and easy handling A stainless steel, hardened body resists corrosion and maintains squareness under routine shop handling, while the flat profile allows close contact with machined faces and reference edges. The compact dimensions make the tool easy to position in tight fixtures or on small workpieces, and the low mass simplifies single‑hand positioning. For routine maintenance, cleaning with a lint‑free cloth and light instrument oil is sufficient to preserve surface integrity and functional accuracy over time. Traceability and application guidance for practical use The square is suitable for right‑angle checks on assemblies, components and tooling, and its robust construction supports frequent use in production environments. The inspection square 100 × 70 mm may be used alongside visual aids or comparators to assess parallelism and squareness trends. Where formal traceability is required, consult the supplier about calibration certificates or bespoke inspection intervals; documented verification supports quality management systems and audit readiness. For reliable right‑angle verification from Metav IndustryLine, contact Metav Werkzeuge in Emmerich for ordering advice or to discuss suitability for specific inspection tasks. Technical data SKU: M214.304 GTIN: 4054469107950 Designation: Inspection square 100 × 70 mm (Kontrollwinkel) Standard: DIN 875/0 Facts Dimensions: 100 × 70 mm eCl@ss: 21170119 Tariff number: 90178090 Category path: Messgeräte > Winkel Special features Material: stainless steel, hardened Shape: flat profile Weight indication present in label Brand: Metav IndustryLine FAQ What tolerance class does the square meet? The inspection square meets the DIN 875/0 tolerance class as stated, which defines the permitted deviation for right‑angle gauges of this category. Is the square suitable for routine shop use on ferrous parts? Yes; the hardened stainless steel construction of this inspection square is suited to regular workshop inspection of ferrous components and tooling. Can the square be calibrated or supplied with a certificate? Calibration and documentation options are available; inquire with Metav Werkzeuge about calibration services and certificate scope for the inspection square (SKU M214.304). How should the square be maintained to preserve accuracy? Routine cleaning with a soft cloth and light instrument oil will protect the hardened stainless surfaces and maintain reliable contact for angle checks. Which applications suit the 100 × 70 mm format? The compact 100 × 70 mm size is ideal for small workpieces, fixtures, and bench inspection where a stable, close‑contact square is required. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70 mm Inspection Square Flat, DIN 875/2, 0.14 kg - Metav IndustryLine
Robust flat inspection square with DIN 875/2 conformity and a compact 100 × 70 mm layout provides stable, repeatable right‑angle checks; combine reliable construction with straightforward handling for consistent quality control. Order directly via Metav Werkzeuge or consult our specialists for application advice. Inspection square 100 × 70 mm, DIN 875/2 — Metav IndustryLine, flat design Inspection square 100 × 70 mm, DIN 875/2 is a compact right‑angle control instrument intended for workshop inspection and quality assurance tasks DIN 875/2 accuracy standard Flat profile for confined spaces 100 × 70 mm measurement faces Normal steel construction, robust finish Ensure accurate right‑angle checks in production The DIN 875/2 classification guarantees a measurable tolerance band suitable for routine inspection and workshop control tasks. The flat inspection square provides a defined reference edge for quick alignment and verification of machined faces and assemblies. Users benefit from a consistent geometric reference that reduces setup time and supports repeatable verification processes, which in turn helps maintain production tolerances and minimise rework. Practical handling where space is limited A flat profile and compact 100 × 70 mm footprint make this tool well suited to confined fixturing and bench work. The slim geometry allows engagement with narrow components and tight clearances without loss of stability. The result is efficient measuring in locations where larger angle gauges cannot be positioned, supporting smooth workflow in tool rooms, jigs and fixtures, and small‑batch inspection. Material, finish and workshop suitability Made from normal steel, the item offers a balance of rigidity and economical manufacture for everyday shop use. The simple, robust construction is compatible with standard workshop environments and supports routine contact with hardened or ground surfaces. Where documented traceability is required, Metav Werkzeuge can advise on additional calibration and verification options to integrate the gauge into existing quality workflows. Contact Metav Werkzeuge for application recommendations and to secure the Metav IndustryLine inspection square for reliable angle control; call +49 2822 7131930 or email info@metav-werkzeuge.com Technical Data Article number: M214.553 GTIN: 4054469109176 Tariff number: 90178090 eCl@ss: 21170119 Facts Dimensions: 100 × 70 mm Standard: DIN 875/2 Material: Normal steel Design: flat profile Special features Compact inspection square for right‑angle checks Suitable for workshop and quality control applications Category: Angles / inspection tools Image asset available (reference file) FAQ What tolerance class does the inspection square conform to? The inspection square conforms to DIN 875/2, providing a tolerance level suitable for standard workshop inspections and routine quality control. Is the inspection square suitable for cramped measuring locations? Yes, the flat profile and 100 × 70 mm footprint permit use in confined spaces and on small fixtures where larger angle tools cannot be positioned. What material is the angle made from and how durable is it? The angle is manufactured from normal steel, offering robust durability for everyday workshop use and good resistance to mechanical wear under typical handling. Can Metav Werkzeuge provide additional calibration or verification documentation? Metav Werkzeuge can advise on calibration options and traceability to fit into existing quality procedures; please contact the Metav Werkzeuge team for tailored recommendations. Metav IndustryLine: Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70 mm Inspection Square Flat, Hardened Stainless Steel, DIN 875/2 - Metav IndustryLine
Benefit from the combination of hardened stainless steel construction, DIN 875/2 accuracy and a compact, flat profile for dependable right‑angle checks in routine inspection and setup. The small footprint and durable finish reduce handling time and long‑term wear; order the inspection square 100×70 mm directly via Metav Werkzeuge or ask our consultants if needed. Inspection square M214.364 — hardened stainless steel, DIN 875/2, 100×70 mm The inspection square 100×70 mm is a flat, hardened stainless steel control square intended for fast, repeatable 90° checks in workshop inspection and production set‑ups. Hardened stainless steel construction DIN 875/2 tolerance for reliable squareness Compact 100×70 mm size, flat profile Precise material and standard for consistent squareness The combination of hardened stainless steel and the DIN 875/2 specification ensures a dependable reference edge for everyday measurement tasks. The hardened alloy reduces surface wear and preserves the zero reference during frequent use, while the DIN standard defines tolerances for squareness that are recognised across engineering shops. This means the tool functions as a reliable bench mark for aligning jigs, checking mitres and confirming machine set‑ups, reducing rework and inspection time. Compact design that speeds up routine checks A 100×70 mm footprint and flat profile make this square easy to position on small workpieces and in confined setups. The compact dimensions supply a balanced trade‑off between reach and stiffness, enabling quick external and internal right‑angle verifications without cumbersome handling. In practice, the small size shortens the time to check multiple components, supports rapid go/no‑go decisions and fits neatly into standard inspection tool kits. Built for longevity and low upkeep Made from hardened stainless steel, the square resists corrosion and the surface remains true even after repeated contact with abrasive materials or coolant residues. The flat, machined faces present a consistent contact area for reliable readings and require minimal maintenance: occasional cleaning and storage in a dry place are sufficient to retain accuracy. Robust construction reduces the need for frequent replacement, offering a long service life in demanding workshop environments. Integration into quality workflows and documentation As a compact control instrument, the square is well suited to incoming inspection, final checks and machine set‑up tasks. Its consistent reference edge simplifies documentation of tolerances and supports traceable inspection routines when combined with company check sheets. For organisations standardising on Metav IndustryLine tools, the product provides a straightforward component to include in quality protocols and routine calibration cycles. For dependable right‑angle measurement from the Metav IndustryLine range, choose the inspection square M214.364 and contact Metav Werkzeuge in Emmerich for procurement or technical advice via info@metav-werkzeuge.com or +49 2822 7131930 Technical data Article number: M214.364 Material: hardened stainless steel Standard: DIN 875/2 Finish: flat Facts Dimensions: 100 x 70 mm Weight: 0.14 kg GTIN: 4054469108421 Tariff number: 90178090 ECLASS: 21170119 Special features Hardened stainless steel construction Flat profile for stable contact DIN 875/2 tolerance class Compact format for workshop use Category: angle / inspection square FAQ What level of accuracy does this inspection square provide? The inspection square 100×70 mm conforms to DIN 875/2, which specifies a workshop‑grade tolerance for squareness, making it suitable for routine alignment and inspection tasks with consistent repeatability. Is the material resistant to corrosion in a workshop environment? Yes, the tool is made from hardened stainless steel, providing corrosion resistance and long‑term durability even with occasional exposure to coolant or workshop humidity. Can this square be used for both setup and final inspection? The compact format and machined faces make the square suitable for machine set‑ups, jig alignment and final inspection checks, offering a stable reference for small to medium‑sized components. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
100x70 mm Inspection Square With mm Graduation, DIN 875/2 Stainless Steel - Metav IndustryLine
Take advantage of precise angle verification, durable stainless‑steel construction and clear millimetre graduation for consistent inspection results in the workshop; order the control square directly via Metav Werkzeuge or consult our specialists for application advice. Control square 100 x 70 mm — stainless steel inspection square, DIN 875/2 (Metav IndustryLine) A Control square 100 x 70 mm designed for fast right-angle checks in metalworking, quality control and assembly tasks Stainless steel (INOX) construction DIN 875/2 accuracy class Millimetre graduation on blade Precision where form and function meet The compact 100 x 70 mm geometry provides a stable reference for routine right‑angle checks while remaining simple to handle on the shop floor. Made from stainless steel, the square resists corrosion and keeps edges square under frequent use, so measurements stay reliable over time. Conformance to DIN 875/2 anchors the tool in recognised industry tolerances, giving a measurable basis for inspection work and facilitating consistent results in production or incoming part checks. Fast verification for everyday workshop workflows Equipped with a clear mm division, the square enables quick dimensional comparisons and alignment tasks without the need for additional gauges. The short blade and body geometry offer low torsion and a steady contact surface, which is advantageous when checking components on machines, assembly fixtures or inspection benches. The result is efficient inspection cycles and reduced rework time where right‑angle conformity is critical. Confidence in procurement and long‑term use Sourcing this inspection square from Metav IndustryLine means pragmatic access to a broad catalogue backed by Metav’s logistics and quality filter in Emmerich. The compact weight (about 0.14 kg) and robust finish make it a dependable hand tool for daily use. Paired with Metav’s experience—serving a large industrial customer base—this tool supports reproducible checks and integrates smoothly into a workshop’s quality routine, contributing to fewer measurement‑related stoppages and steadier production output. For precise right‑angle control and reliable workshop supply, request the Metav IndustryLine control square via Metav Werkzeuge GmbH — phone +49 2822 7131930 or email info@metav-werkzeuge.com for purchasing and technical guidance Technical data SKU: M214.364.mm Label: Kontrollwinkel 100x70 mm, DIN 875/2, INOX Material: rostfreier Stahl Facts Dimensions: 100 x 70 mm Weight: 0.14 kg eClass: 21170119 Special features DIN 875/2 standard Millimetre graduation INOX / corrosion‑resistant finish FAQ What material is the square made from? The control square is manufactured from stainless steel (INOX), providing corrosion resistance and long service life for workshop use. Which accuracy standard does the tool meet? This inspection square complies with DIN 875/2, ensuring suitability for routine angle checks that require standardised tolerances. Is the blade graduated in millimetres? Yes, the tool features a millimetre graduation that simplifies quick dimensional comparisons during inspection and setup. What are the dimensions and the SKU for ordering? The square measures 100 x 70 mm and is listed as SKU M214.364.mm for procurement and inventory purposes. Is this tool suitable for everyday shop inspection tasks? Its compact form, corrosion‑resistant finish and DIN class make the control square well suited to regular inspection, assembly and machine setup operations. Manufacturer / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; info@metav-werkzeuge.com
Ensure right angles every time with precision angle gauges
Angle measurement is decisive in metalworking, where even the smallest deviation from a 90° geometry can cause assembly errors or functional faults. The category covers both fixed verification tools and variable measuring instruments, presented here as angle gauges, with common synonyms control squares and sine bars used throughout.
Where and how these tools make the difference on the shop floor
For basic layout and rough alignment, the engineer’s square (a simple flat or bench square) serves as the workshop baseline; it is useful for marking and quick checks but not intended for precision components. When higher accuracy is required, control squares with hardened and lapped faces are used; they are produced in accuracy classes referenced by DIN 875 and designed for the light gap method, which reveals form errors by inspecting the gap between gauge and workpiece under illumination. In pipeline and vessel fabrication, the flange square provides a robust contact geometry to align flanged faces to pipe axes and to withstand high mechanical loading. For angles other than 90°, a sine bar enables trigonometrical determination by using end measures, achieving resolutions into the seconds of arc when set up correctly. Regular calibration and checks for wear and flatness of the legs are essential, since a rounded or damaged leg will distort results.
Practical advantages that reduce rework and speed production
- Reduced fitting errors through repeatable reference geometry using control squares.
- Clear detection of form errors with the light gap method (fast visual indication).
- Durable contact surfaces thanks to hardened and lapped faces, extending service life.
- Accurate non-90° measurement via sine bar setups, enabling fine angular adjustments.
- Stable alignment of flanged components with purpose-built flange squares, lowering assembly time.
Why Metav is the reliable partner for precision angle measurement
Metav stands for democratisation of precision. As an experienced precision partner, Metav combines decades of know-how with a comprehensive range for industry, craft and trade; over 48,000 customers trust this quality filter based in Emmerich. With a broad assortment and consistent supply, Metav simplifies procurement and ensures a dependable source for angle gauges, calibration accessories and workshop standards.
Quick summary
Accurate angle gauges — from basic engineer’s squares to high-precision control squares and sine bars — prevent costly fit problems and support reliable, repeatable manufacture. Choose tools matched to the required accuracy class and maintain them regularly to keep measurement integrity.
FAQ
What is the difference between an engineer’s square and a control square?
An engineer’s square is a workshop baseline for marking and rough checks, while a control square features hardened and lapped faces and is manufactured to tighter tolerances (per DIN 875) for inspection and detection of form errors.
How does the light gap method work for checking right angles?
The light gap method places the workpiece against a control square; uneven gaps visible under a light source indicate deviations from perpendicularity, providing an immediate visual assessment of form errors.
When should I use a sine bar instead of a fixed angle gauge?
Use a sine bar when you need precise angles other than 90°. By stacking end measures you set the desired angle trigonometrically, achieving much finer resolution than most fixed gauges allow.
How often should angle gauges be checked for wear?
Regular inspection of flatness and leg condition is mandatory; any rounding or damage to the legs can significantly falsify measurements, so schedule checks according to usage intensity and your quality control procedures.
Fragen zu diesen Produkten??
Mit mehr als 30 Jahren Erfahrung beraten wir Sie gerne persönlich.
Tel.: +49 2822 7131930
Mail: info@metav-werkzeuge.com