80mm Face Milling Head for SDHT 1204 Indexable Inserts 45° Cutting Angle, M4.5x11 Torx - Teknik Makina

Take advantage of a compact Torx screw that combines secure Torx T15 drive compatibility, a standard M4.5 thread and a countersink-friendly 60° head for consistently flush assemblies; order directly through Metav Werkzeuge or contact our consultants for specification support. Torx screw TC080TM — M4.5 × 11 mm, Torx T15 by Teknik Makina A Torx screw intended for standard workshop and assembly applications, offering an M4.5 thread and an 11 mm total length for reliable, repeatable fastening. Torx T15 drive compatible Thread M4.5 for standard fittings 11 mm total length 60° head angle for flush fastening Precise fastening for repeatable assembly results The compact fastener delivers mechanical reliability by combining a standard M4.5 thread with a short, controlled shank. The combination of a metric thread and a shallow overall length results in predictable clamping behaviour when used in pre-tapped holes or with matching threaded inserts. Matching the drive to a Torx T15 tool reduces cam‑out and torque loss during installation, contributing to consistent joint preload and fewer reworks. The specification supports process stability in small- to medium-scale assemblies where repeatability matters. Tool compatibility and installation efficiency The head geometry, given as a 60° angle, indicates suitability for countersunk or flush mounting where a low-profile finish is required. The Torx interface paired with a T15 driver enables efficient torque transfer and precise positioning, which speeds up automated and manual assembly steps alike. Reduced cam‑out extends driver bit life and lowers the incidence of damaged heads; the fastener’s dimensions (diameter 6.2 mm, thread M4.5, total length 11 mm) make it a practical choice for compact components and confined installation spaces. Workshop readiness and supply reliability Technical simplicity and conformity to familiar standards make this fastener straightforward to specify across procurement and production documents. The item’s listed mass (0.1 kg) is useful for logistics and inventory planning. Sourcing via a trusted partner helps maintain continuity of supply: Metav combines a broad product range with a quality filter at its Emmerich site, backed by long‑standing industry relationships and an established customer base of over 48,000 customers. For procurement planners and workshop managers, the combination of standard sizing and trusted distribution reduces administrative overhead and supports uninterrupted assembly operations. For availability checks, compatibility advice or to secure Teknik Makina stock through Metav Werkzeuge, contact Metav Werkzeuge at info@metav-werkzeuge.com or +49 2822 7131930 for prompt assistance Technical data Article number: TC080TM Designation: Torx screw Manufacturer: Teknik Makina eClass: 21189290 Facts Diameter: 6.2 mm Thread: M4.5 Total length: 11 mm Head angle: 60° Weight: 0.1 kg Special features Torx drive: T15 compatible Countersink geometry indicated Standard workshop fastener FAQ What driver fits this screw? The Torx screw TC080TM is compatible with a Torx T15 driver for optimal torque transfer and reduced cam‑out. Is the head suitable for a flush finish? Yes, the head angle of 60° on the TC080TM is intended for countersunk applications and provides a low‑profile finish when installed correctly. What are the core dimensions of the fastener? Diameter 6.2 mm, thread M4.5 and total length 11 mm are the primary dimensions of the TC080TM. Is this fastener suitable for automated assembly? The Torx interface (T15) and standard metric thread make the TC080TM well suited to both manual and automated assembly processes. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Take advantage of the compact T15 Torx key with a precision tip and a light 0.1 kg handling weight for efficient fastening in workshop tasks; order or request further advice via Metav Werkzeuge for a reliable supply. Torx key T15 (T15TM) – Compact Torx key by Teknik Makina A Torx key T15 designed for secure engagement with T15 Torx fasteners in maintenance, assembly and workshop environments. Precision T15 tip for Torx fasteners Lightweight: 0.1 kg for easy handling Compact design for tight spaces Suitable for professional workshop use Reliable engagement reduces rework and improves throughput The precision-machined T15 tip ensures a secure interface with Torx fasteners, which reduces the risk of slipping and stripped heads. This technical fit improves torque transfer and leads to fewer repeat operations — a measurable benefit for production and maintenance workflows. The clear specification of the tip size supports quick tool selection and avoids time lost on trial fitting, contributing to a smoother, more efficient assembly process. Compact, lightweight handling for faster tasks With a total weight of 0.1 kg, the tool is easy to manipulate for repetitive fastening work and offers noticeably reduced hand fatigue during extended use. The compact form factor is particularly useful where access is restricted, enabling tasks to be completed faster and with greater confidence. The light construction also streamlines storage and transport within mobile tool kits or service vans, aiding rapid response in field servicing. Practical addition to a professional toolkit with dependable sourcing This Torx key is a straightforward addition to workshop toolsets where standardised fastener systems are used. The clearly stated T15 designation supports compatibility planning across maintenance inventories. Sourcing via Metav Werkzeuge adds logistical reliability: Metav’s Emmerich location acts as a quality filter for the European market, ensuring consistent supply and simplifying procurement for industry and trade. Contact Metav Werkzeuge today to confirm availability of the Teknik Makina Torx key T15 (SKU T15TM) and to arrange a tailored supply for workshop or service requirements Technical data Article number: T15TM Manufacturer: Teknik Makina ECLASS: 21189290 Facts Torx size: T15 Weight: 0.1 kg Features / Applications Compatible with Torx T15 fasteners Intended for workshop and maintenance use FAQ What size fasteners does this key fit? The Torx key T15 fits Torx fasteners specified as T15; the size is indicated on the SKU T15TM. Is the tool suitable for professional use in a workshop? The Torx key T15 is described for workshop and maintenance applications and is suitable for professional tool kits. What is the weight of the Torx key T15? The listed weight for the Torx key T15 (SKU T15TM) is 0.1 kg. Manufacturer / Responsible: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com