17.1mm Locking Screw M8 24mm Overall Length, Allen Key 5 Compatible - Teknik Makina

Q: Is this fastener suitable for use on calipers?

Yes. The component is specified for use on calipers and small measuring fixtures where an M8 threaded locking element and a 17.1 mm contact diameter are appropriate.

Q: Which manufacturer supplies this locking screw?

This locking screw is supplied by Teknik Cutting Tools and is offered through Metav Werkzeuge GmbH as the distributor.

Liegende Verriegelungsschraube auf weißem Hintergrund.

Picture similar to product

€3.81

Accessory Items

5mm Allen Key Hex Wrench, Steel - Teknik Makina

€8.39

Product number: TC054TM

Product information "17.1mm Locking Screw M8 24mm Overall Length, Allen Key 5 Compatible - Teknik Makina"

Take advantage of a compact locking solution with an M8 thread and a precise 17.1 mm diameter to guarantee repeatable clamping for measuring tools; order directly via Metav Werkzeuge or consult the team for application advice.

Locking screw (Verriegelungsschraube) — M8 thread, 24 mm overall length (Teknik Makina)

Locking screw (Verriegelungsschraube) for secure clamping on calipers and small fixtures; designed for workshop and precision-measurement applications

M8 thread for secure fastening
Compatible with 5 mm Allen key
Compact 24 mm overall length

Consistent clamping for precision measuring equipment

The compact locking screw offers a straightforward way to secure sliding parts on measuring instruments and small fixtures. With an M8 thread and a 17.1 mm diameter, the design prioritises repeatability and stable clamping force, which reduces measurement variability during routine checks. In practice, a correctly specified thread and contact diameter mean fewer positional shifts under load, so measurement results remain consistent. Engineers and technicians working with calipers and comparable tools benefit from the predictable mechanical behaviour of this fastener.

Simple installation and maintenance for busy workshops

Installation requires only a 5 mm Allen key, making assembly and readjustment rapid and accessible at the bench. The 24 mm overall length ensures the component fits into compact assemblies without requiring modifications to the host instrument. The light weight contributes to minimal added mass on movable parts while still providing firm locking action. For teams aiming to streamline tool set-up and maintenance cycles, this fastener reduces downtime: quick access with a single tool and a straightforward thread engagement combine to save time in repetitive tasks.

Engineered for reliability and easy procurement

Manufactured by Teknik Makina, the component is designed for routine use in industrial and workshop environments. The plain, functional form supports a robust locking action and straightforward replacement when required. Buyers can rely on standard metric sizing—M8 and common Allen-key operation—so spare-part management is simplified and compatible with existing inventories. When precision instruments demand dependable securing elements, this locking screw provides a narrow, well-defined solution that integrates with standard calipers and measuring fixtures.

For reliable clamping with Teknik Makina components, contact Metav Werkzeuge in Emmerich for stock and application guidance — eMail: info@metav-werkzeuge.com or call +49 2822 7131930

Technical data

Article number: TC054TM
Manufacturer: Teknik Makina
Diameter: 17.1 mm
Thread: M8
Overall length: 24 mm
Weight: 0.1 kg
ECLASS: 21189290
Suitable for calipers: 5 mm Allen key
Product type: locking screw
Design: compact locking fastener

FAQ

What tool is required to fit the locking screw?
The locking screw is designed to be tightened with a 5 mm Allen key; this simple hex drive enables fast installation and adjustment.

Is this fastener suitable for use on calipers?
Yes, the component is specified for caliper applications and is listed as suitable for calipers with a 5 mm Allen key interface.

What are the main dimensions of the part?
The fastener features an M8 thread, a 17.1 mm diameter and a 24 mm overall length (SKU TC054TM).

Which manufacturer supplies this locking screw?
This locking screw is supplied by Teknik Makina and is offered through Metav Werkzeuge as the responsible distributor.

Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; +49 2822 7131930; eMail: info@metav-werkzeuge.com

Properties "17.1mm Locking Screw M8 24mm Overall Length, Allen Key 5 Compatible - Teknik Makina"

Designation:	Verriegelungsschraube
Diameter-1:	17,1mm

Accessory Items

5mm Allen Key Hex Wrench, Steel - Teknik Makina

Take advantage of a compact, reliable tool that combines 5 mm accuracy with easy handling to keep assembly and maintenance tasks moving smoothly; lightweight construction at 0.1 kg reduces operator fatigue and supports fast, repeatable tightening. Order directly via Metav Werkzeuge or consult our team for specific workshop applications. Allen key (5 mm) — compact hex key for workshop fastening, Teknik Makina The Allen key is a compact hex wrench designed for precise fastening in assembly, maintenance and general workshop applications Compact 5 mm hex key for precise fastening Lightweight: only 0.1 kg for easy handling Robust workshop tool by Teknik Makina Precision fastening where space is limited The compact 5 mm shaft and hex profile enable accurate torque transfer for small fasteners, making this tool suitable for confined or recessed fixings. Its minimal profile supports access to tight joints while the standard hex geometry ensures consistent contact with the fastener head, reducing cam‑out and rounding. The emphasis is on precision and repeatability, so routine assembly and maintenance cycles remain efficient and traceable with every twist. Practical design for efficient workshop use A lightweight tool at 0.1 kg, this hex key reduces hand fatigue during repetitive operations and speeds up small‑part assembly tasks. The simple form factor eliminates unnecessary bulk on the workbench and integrates well with existing tool sets. By favouring straightforward geometry over complex mechanisms, the tool promotes a low‑maintenance workflow that aligns with lean workshop practices and reliable day‑to‑day performance. Easy handling, storage and trusted provenance The compact profile supports tidy storage and rapid retrieval from tool boards or racks, improving process flow between jobs. Supplied under the Teknik Makina label, this hex key benefits from a clear, production‑orientated design suited to industrial and trade environments. The focus remains on dependable operation and practical usability, providing craftsmen and technicians with a straightforward, compact design that complements precision tool collections. Consider the Teknik Cutting Tools 5 mm Allen key for consistent small‑fastener work — contact Metav Werkzeuge for availability and application advice Technical Data Article number: 5ALLENTM Designation: Allen key Size indication: 5 Facts Weight: 0.1 kg ECLASS: 21189290 SKU: 5ALLENTM Special features Tool type: Allen key (hex key) Brand: Teknik Makina Compact form for confined spaces FAQ What size is the tool and what does it fit? The tool is a 5 mm Allen key; it fits fasteners with a 5 mm internal hex profile and is intended for small assembly and maintenance tasks. Is the Allen key suitable for workshop and industrial applications? Yes, the 5 mm hex key from Teknik Makina is designed for workshop use and repetitive fastening where a compact, reliable hex wrench is required. How heavy is the tool and does it aid repetitive work? Weighing approximately 0.1 kg, the Allen key reduces hand fatigue during repetitive operations while maintaining secure contact with the fastener. Can the 5ALLENTM be integrated into a standard tool set? The 5ALLENTM Allen key is compact and designed for easy storage on tool boards or in sets, making it straightforward to add to existing collections. Manufacturer: Teknik Cutting Tools, Buyukkayacık OSB Mah.422 Nolu Sokak.No:9, Selcuklu/KONYA/TURKEY / Responsible: Metav Werkzeuge GmbH; Parkring 45; 46446 Emmerich; Germany; +49 2822 7131930; eMail: info@metav-werkzeuge.com

€8.39